When I/O cannot complete due to a fatal error on the DS, ensure that we
invalidate the corresponding layout segment and return it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If a read-write layout has an invalid mirror, then we should
mark it as invalid, and return it.
If a read-only layout has an invalid mirror, then mark it as invalid
and check if there is still at least one valid mirror before we return
it.
Note: Also fix incorrect use of pnfs_generic_mark_devid_invalid().
We really want nfs4_mark_deviceid_unavailable().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Unlike read layouts, the writeable layout cannot fall back to using only
one of the mirrors. It need to write to all of them.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Unlike the files layout, flexfiles does not test for the NFS_DEVICEID_INVALID
flag. Instead it relies on NFS_DEVICEID_UNAVAILABLE.
Fix is to replace with nfs4_mark_deviceid_unavailable().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Mirrors are now shared objects, so we should not be freeing them directly
inside ff_layout_free_lseg(). We should already be doing the right thing
in _ff_layout_free_lseg(), so just let it handle things.
Also ensure that ff_layout_free_mirror() frees the RPC credential if it
is set.
Fixes: 28a0d72c68 ("Add refcounting to struct nfs4_ff_layout_mirror")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the file was fenced and/or has been deleted on the DS, then we want
to retry pNFS after a layoutreturn with error report. If the server
cannot fix the problem, then we rely on it to tell us so in the
response to the LAYOUTGET.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
According to the flexfiles protocol, the layoutreturn should specify an
array of errors in the following format:
struct ff_ioerr4 {
offset4 ffie_offset;
length4 ffie_length;
stateid4 ffie_stateid;
device_error4 ffie_errors<>;
};
This patch fixes up the code to ensure that our ffie_errors is indeed
encoded as an array (albeit with only a single entry).
Reported-by: Tom Haynes <thomas.haynes@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
In order to ensure atomicity of updates, we merge the old layout segments
into the new ones, and then invalidate the old ones.
Also ensure that we order the list of layout segments so that
RO segments are preferred over RW.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Allow advanced users to set the layoutstats timer in order to lengthen
or shorten the period between layoutstat transmissions to the server.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Keep the full list of mirrors in the struct nfs4_ff_layout_mirror so that
they can be shared among the layout segments that use them.
Also ensure that we send out only one copy of the layoutstats per mirror.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We do want to share mirrors between layout segments, so add a refcount
to enable that.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We do not want to update inode attributes with DS values.
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Make sure that we also handle RPC level connection and protocol
negotiation errors.
Reported-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We want to ensure that the stopwatches for the busy timer and the
aggregate timer are consistent. This means that they need to use
the same start/stop times.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Otherwise we break fstest case tests/read_write/mctime.t
Does files layout need the same fix as well?
Cc: stable@vger.kernel.org # v4.0+
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We already know that pg_lseg is NULL here.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Turned out I misinterpreted the spec...
Cc: Tom Haynes <thomas.haynes@primarydata.com>
Reported-by: Jean Spector <jean@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
hdr->good_bytes needs to be set to the length of the request, not
zero.
Cc: stable@vger.kernel.org # 4.0+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This patch ensures that we record the value of 'ffl_flags' from
the layout, and then checks for the presence of the
FF_FLAGS_NO_LAYOUTCOMMIT flag before deciding whether or not to
call pnfs_set_layoutcommit().
The effect is that servers now can decide whether or not they want
the client to call layoutcommit before returning a writeable layout.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
* layoutstats:
pnfs/flexfiles: protect ktime manipulation with mirror lock
nfs: provide pnfs_report_layoutstat when NFS42 is disabled
pnfs/flexfiles: report layoutstat regularly
nfs42: serialize LAYOUTSTATS calls of the same file
pnfs/flexfiles: encode LAYOUTSTATS flexfiles specific data
pnfs/flexfiles: add ff_layout_prepare_layoutstats
pNFS/flexfiles: track when layout is first used
pNFS/flexfiles: add layoutstats tracking
pNFS/flexfiles: Remove unused struct members user_name, group_name
pnfs: add pnfs_report_layoutstat helper function
pNFS: fill in nfs42_layoutstat_ops
NFSv.2/pnfs Add a LAYOUTSTATS rpc function
It looks as if xchg() and cmpxchg() are not available for 64-bit integers on sparc32:
> New breakage seen in linux-next today:
>
> ERROR: "__xchg_called_with_bad_pointer" [fs/nfs/flexfilelayout/nfs_layout_flexfiles.ko] undefined!
> ERROR: "__cmpxchg_called_with_bad_pointer" [fs/nfs/flexfilelayout/nfs_layout_flexfiles.ko] undefined!
> make[2]: *** [__modpost] Error 1
> make[1]: *** [modules] Error 2
Given that mirror ktime manipulation is already under mirror->lock, let's make use of the fact.
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
A ds can be associated with more than one mirror, but we currently skip
setting a mirror's credentials if we find that it's already set up with
a connected client.
The upshot is that we can end up sending DS writes with MDS credentials
instead of properly setting them up. Fix nfs4_ff_layout_prepare_ds to
always verify that the mirror's credentials are set up, even when we
have a DS that's already connected.
Reported-by: Tom Haynes <thomas.haynes@primarydata.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Cc: stable@vger.kernel.org # 4.0+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If we have two tasks racing to update a mirror's credentials, then they
can end up leaking one (or more) sets of credentials. The first task
will set mirror->cred and then the second task will just overwrite it.
Use a cmpxchg to ensure that the creds are only set once. If we get to
the point where we would set mirror->cred and find that they're already
set, then we just release the creds that were just found.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Cc: stable@vger.kernel.org # 4.0+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
As a simple scheme, report every minute if IO is still going on.
Reviewed-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
It fills in the generic part of LAYOUTSTATS call. One thing to note
is that we don't really track if IO is continuous or not. So just fake
to use the completed bytes for it.
Still missing flexfiles specific part, which will be included in the next patch.
Reviewed-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
So that we can report cumulative time since the beginning
of statistics collection of the layout.
Reviewed-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Use kernel.h macro definition.
Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This file is only used internally to the NFS v4 module, so it doesn't
need to be in the global include path. I also renamed it from
nfs_idmap.h to nfs4idmap.h to emphasize that it's an NFSv4-only include
file.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The LAYOUTCOMMIT operation means different things to different layout types.
For blocks and objects, it is both a data and metadata consistency operation.
For files and flexfiles, it is only a metadata consistency operation.
This patch separates out the 2 cases, allowing the files/flexfiles layout
drivers to optimise away the data consistency calls to layoutcommit.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
pnfs_set_layoutcommit() and pnfs_commit_set_layoutcommit() are 100% identical
except for the function arguments. Refactor to eliminate the difference.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Use of synchronize_rcu() when unmounting and potentially freeing a lot
of deviceids is problematic. There really is no reason why we can't just
use kfree_rcu() here.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The File Layout's filelayout_mark_request_commit() is almost the
Flex File Layout's ff_layout_mark_request_commit(). And that can
be reduced by calling into nfs_request_add_commit_list().
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Pull backing device changes from Jens Axboe:
"This contains a cleanup of how the backing device is handled, in
preparation for a rework of the life time rules. In this part, the
most important change is to split the unrelated nommu mmap flags from
it, but also removing a backing_dev_info pointer from the
address_space (and inode), and a cleanup of other various minor bits.
Christoph did all the work here, I just fixed an oops with pages that
have a swap backing. Arnd fixed a missing export, and Oleg killed the
lustre backing_dev_info from staging. Last patch was from Al,
unexporting parts that are now no longer needed outside"
* 'for-3.20/bdi' of git://git.kernel.dk/linux-block:
Make super_blocks and sb_lock static
mtd: export new mtd_mmap_capabilities
fs: make inode_to_bdi() handle NULL inode
staging/lustre/llite: get rid of backing_dev_info
fs: remove default_backing_dev_info
fs: don't reassign dirty inodes to default_backing_dev_info
nfs: don't call bdi_unregister
ceph: remove call to bdi_unregister
fs: remove mapping->backing_dev_info
fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info
nilfs2: set up s_bdi like the generic mount_bdev code
block_dev: get bdev inode bdi directly from the block device
block_dev: only write bdev inode on close
fs: introduce f_op->mmap_capabilities for nommu mmap support
fs: kill BDI_CAP_SWAP_BACKED
fs: deduplicate noop_backing_dev_info
Found by 0-DAY kernel test infrastructure:
fs/nfs/flexfilelayout/flexfilelayoutdev.c:520:13-16: ERROR: reference preceded by free on line 518
fs/nfs/flexfilelayout/flexfilelayoutdev.c:520:26-29: ERROR: reference preceded by free on line 518
fs/nfs/flexfilelayout/flexfilelayoutdev.c:520:39-42: ERROR: reference preceded by free on line 518
fs/nfs/flexfilelayout/flexfilelayoutdev.c:521:3-6: ERROR: reference preceded by free on line 518
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The flexfile layout is a new layout that extends the
file layout. It is currently being drafted as a specification at
https://datatracker.ietf.org/doc/draft-ietf-nfsv4-layout-types/
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Tao Peng <bergwolf@primarydata.com>
Trond Myklebust
kbuild test robot
Peng Tao
Jeff Layton
Fabian Frederick
Anna Schumaker
Tom Haynes
Linus Torvalds
Tom Haynes