Граф коммитов

389 Коммитов

Автор SHA1 Сообщение Дата
Al Viro ce3b0f8d5c New helper - current_umask()
current->fs->umask is what most of fs_struct users are doing.
Put that into a helper function.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-03-31 23:00:26 -04:00
Thomas Gleixner 4c41bd0ec9 [JFFS2] fix mount crash caused by removed nodes
At scan time we observed following scenario:

   node A inserted
   node B inserted
   node C inserted -> sets overlapped flag on node B

   node A is removed due to CRC failure -> overlapped flag on node B remains

   while (tn->overlapped)
   	 tn = tn_prev(tn);

   ==> crash, when tn_prev(B) is referenced.

When the ultimate node is removed at scan time and the overlapped flag
is set on the penultimate node, then nothing updates the overlapped
flag of that node. The overlapped iterators blindly expect that the
ultimate node does not have the overlapped flag set, which causes the
scan code to crash.

It would be a huge overhead to go through the node chain on node
removal and fix up the overlapped flags, so detecting such a case on
the fly in the overlapped iterators is a simpler and reliable
solution.

Cc: stable@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-02-21 11:09:29 +01:00
Andres Salomon efab0b5d3e [JFFS2] force the jffs2 GC daemon to behave a bit better
I've noticed some pretty poor behavior on OLPC machines after bootup, when
gdm/X are starting.  The GCD monopolizes the scheduler (which in turns
means it gets to do more nand i/o), which results in processes taking much
much longer than they should to start.

As an example, on an OLPC machine going from OFW to a usable X (via
auto-login gdm) takes 2m 30s.  The majority of this time is consumed by
the switch into graphical mode.  With this patch, we cut a full 60s off of
bootup time.  After bootup, things are much snappier as well.

Note that we have seen a CRC node error with this patch that causes the machine
to fail to boot, but we've also seen that problem without this patch.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-02-14 08:59:04 +00:00
Artem Bityutskiy ab5610b434 [JFFS2] remove junk prototypes
'rb_prev()', 'rb_next()' and 'rb_replace_node()' are declared in
include/linux/rbtree.h, no need for JFFS2 to re-declare them. I
believe these are left-overs from the old days when the common
RB tree code did not have those call and JFFS2 had private
implementation.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-09 21:05:21 +00:00
David Woodhouse 353816f43d Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:
	arch/arm/mach-pxa/corgi.c
	arch/arm/mach-pxa/poodle.c
	arch/arm/mach-pxa/spitz.c
2009-01-05 10:50:33 +01:00
Nick Piggin 54566b2c15 fs: symlink write_begin allocation context fix
With the write_begin/write_end aops, page_symlink was broken because it
could no longer pass a GFP_NOFS type mask into the point where the
allocations happened.  They are done in write_begin, which would always
assume that the filesystem can be entered from reclaim.  This bug could
cause filesystem deadlocks.

The funny thing with having a gfp_t mask there is that it doesn't really
allow the caller to arbitrarily tinker with the context in which it can be
called.  It couldn't ever be GFP_ATOMIC, for example, because it needs to
take the page lock.  The only thing any callers care about is __GFP_FS
anyway, so turn that into a single flag.

Add a new flag for write_begin, AOP_FLAG_NOFS.  Filesystems can now act on
this flag in their write_begin function.  Change __grab_cache_page to
accept a nofs argument as well, to honour that flag (while we're there,
change the name to grab_cache_page_write_begin which is more instructive
and does away with random leading underscores).

This is really a more flexible way to go in the end anyway -- if a
filesystem happens to want any extra allocations aside from the pagecache
ones in ints write_begin function, it may now use GFP_KERNEL (rather than
GFP_NOFS) for common case allocations (eg.  ocfs2_alloc_write_ctxt, for a
random example).

[kosaki.motohiro@jp.fujitsu.com: fix ubifs]
[kosaki.motohiro@jp.fujitsu.com: fix fuse]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org>		[2.6.28.x]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Cleaned up the calling convention: just pass in the AOP flags
  untouched to the grab_cache_page_write_begin() function.  That
  just simplifies everybody, and may even allow future expansion of the
  logic.   - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-04 13:33:20 -08:00
David Woodhouse 0bc4382ae9 [JFFS2] Clean up fs/jffs2/compr_rubin.c
Triggered by a smaller cleanup from Jianjun Kong <jianjun@zeuux.org>

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-10 15:34:49 +00:00
Adrian Hunter 69423d99fc [MTD] update internal API to support 64-bit device size
MTD internal API presently uses 32-bit values to represent
device size.  This patch updates them to 64-bits but leaves
the external API unchanged.  Extending the external API
is a separate issue for several reasons.  First, no one
needs it at the moment.  Secondly, whether the implementation
is done with IOCTLs, sysfs or both is still debated.  Thirdly
external API changes require the internal API to be accepted
first.

Note that although the MTD API will be able to support 64-bit
device sizes, existing drivers do not and are not required
to do so, although NAND base has been updated.

In general, changing from 32-bit to 64-bit values cause little
or no changes to the majority of the code with the following
exceptions:
    	- printk message formats
    	- division and modulus of 64-bit values
    	- NAND base support
	- 32-bit local variables used by mtdpart and mtdconcat
	- naughtily assuming one structure maps to another
	in MEMERASE ioctl

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-10 13:37:21 +00:00
Linus Torvalds c361948712 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
  [JFFS2] fix race condition in jffs2_lzo_compress()
  [MTD] [NOR] Fix cfi_send_gen_cmd handling of x16 devices in x8 mode (v4)
  [JFFS2] Fix lack of locking in thread_should_wake()
  [JFFS2] Fix build failure with !CONFIG_JFFS2_FS_WRITEBUFFER
  [MTD] [NAND] OMAP2: remove duplicated #include
2008-11-06 15:43:13 -08:00
Geert Uytterhoeven dc8a0843a4 [JFFS2] fix race condition in jffs2_lzo_compress()
deflate_mutex protects the globals lzo_mem and lzo_compress_buf.  However,
jffs2_lzo_compress() unlocks deflate_mutex _before_ it has copied out the
compressed data from lzo_compress_buf.  Correct this by moving the mutex
unlock after the copy.

In addition, document what deflate_mutex actually protects.

Cc: stable@kernel.org
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Richard Purdie <rpurdie@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-11-05 23:22:02 +01:00
David Woodhouse b27cf88e95 [JFFS2] Fix lack of locking in thread_should_wake()
The thread_should_wake() function trawls through the list of 'very
dirty' eraseblocks, determining whether the background GC thread should
wake. Doing this without holding the appropriate locks is a bad idea.

OLPC Trac #8615

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org
2008-10-31 14:52:24 +00:00
Christoph Hellwig 3222a3e55f [PATCH] fix ->llseek for more directories
With this patch all directory fops instances that have a readdir
that doesn't take the BKL are switched to generic_file_llseek.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2008-10-23 05:13:21 -04:00
David Woodhouse 8966c5e0fc [JFFS2] Use d_splice_alias() not d_add() in jffs2_lookup()
Now that JFFS2 can be exported by NFS, we need to get this right.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-23 05:13:12 -04:00
David Woodhouse 5f556aab90 [JFFS2] Reinstate NFS exportability
Now that the readdir/lookup deadlock issues have been dealt with, we can
export JFFS2 file systems again.

(For now, you have to specify fsid manually; we should add a method to
the export_ops to handle that too.)

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-23 05:13:07 -04:00
Steve Glendinning f04de505e3 [JFFS2] Fix build failure with !CONFIG_JFFS2_FS_WRITEBUFFER
Build failure introduced by 5bf1723723
[JFFS2] Write buffer offset adjustment for NOR-ECC (Sibley) flash

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-21 13:37:43 +01:00
Alexander Belyakov 5bf1723723 [JFFS2] Write buffer offset adjustment for NOR-ECC (Sibley) flash
After choosing new c->nextblock, don't leave the wbuf offset field
occasionally pointing at the start of the next physical eraseblock.
This was causing a BUG() on NOR-ECC (Sibley) flash, where we start
writing after the cleanmarker.

Among other this fix should cover write buffer offset adjustment
after flushing the last page of an eraseblock.

Signed-off-by: Alexander Belyakov <abelyako@googlemail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-18 11:54:09 +01:00
Geert Uytterhoeven faa5c2a15e [JFFS2] Correct parameter names of jffs2_compress() in comments
Make the parameter names of jffs2_compress() in its comments match with the
actual implementation

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-17 15:56:44 +01:00
David Howells 3fc678a0e6 CRED: Wrap task credential accesses in the JFFS2 filesystem
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.

Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().

Change some task->e?[ug]id to task_e?[ug]id().  In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-01 11:32:59 +01:00
David Woodhouse 9d7548d4ca Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2008-09-01 11:32:13 +01:00
Alexey Dobriyan 31db6e9ea1 [JFFS2] Move JFFS2 config options out of fs/Kconfig
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-01 11:29:52 +01:00
Adrian Bunk 7a8fc9b248 removed unused #include <linux/version.h>'s
This patch lets the files using linux/version.h match the files that
#include it.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-23 12:14:12 -07:00
David Woodhouse 75caf6b5ac [JFFS2] Fill in f_fsid field in jffs2_statfs()
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-18 16:23:53 +01:00
Adrian Hunter bde86fec7c [JFFS2] Correct symlink name too long error code
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-14 09:58:29 +01:00
Adrian Hunter bb0eb217c9 [MTD] Define and use MTD_FAIL_ADDR_UNKNOWN instead of 0xffffffff
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-12 11:02:15 +01:00
David Woodhouse b7600dba6d [JFFS2] Fix allocation of summary buffer
We can't use vmalloc for the buffer we use for writing summaries,
because some drivers may want to DMA from it. So limit the size to 64KiB
and use kmalloc for it instead.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-01 10:07:51 +01:00
Linus Torvalds 9ee08c2df4 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (57 commits)
  [MTD] [NAND] subpage read feature as a way to increase performance. 
  CPUFREQ: S3C24XX NAND driver frequency scaling support.
  [MTD][NAND] au1550nd: remove unused variable
  [MTD] jedec_probe: Fix SST 16-bit chip detection
  [MTD][MTDPART] Fix a division by zero bug
  [MTD][MTDPART] Cleanup and document the erase region handling
  [MTD][MTDPART] Handle most checkpatch findings
  [MTD][MTDPART] Seperate main loop from per-partition code in add_mtd_partition
  [MTD] physmap: resume already suspended chips on failure to suspend
  [MTD] physmap: Fix suspend/resume/shutdown bugs.
  [MTD] [NOR] Fix -ETIMEO errors in CFI driver
  [MTD] [NAND] fsl_elbc_nand: fix section mismatch with CONFIG_MTD_OF_PARTS=y
  [JFFS2] Use .unlocked_ioctl
  [MTD] Fix const assignment in the MTD command line partitioning driver
  [MTD] [NOR] gen_probe: No debug message when debugging is disabled
  [MTD] [NAND] remove __PPC__ hardcoded address from DiskOnChip drivers
  [MTD] [MAPS] Remove the bast-flash driver.
  [MTD] [NAND] fsl_elbc_nand: ecclayout cleanups
  [MTD] [NAND] fsl_elbc_nand: implement support for flash-based BBT
  [MTD] [NAND] fsl_elbc_nand: fix OOB workability for large page NAND chips
  ...
2008-07-26 20:30:56 -07:00
Al Viro e6305c43ed [PATCH] sanitize ->permission() prototype
* kill nameidata * argument; map the 3 bits in ->flags anybody cares
  about to new MAY_... ones and pass with the mask.
* kill redundant gfs2_iop_permission()
* sanitize ecryptfs_permission()
* fix remaining places where ->permission() instances might barf on new
  MAY_... found in mask.

The obvious next target in that direction is permission(9)

folded fix for nfs_permission() breakage from Miklos Szeredi <mszeredi@suse.cz>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26 20:53:14 -04:00
Alexey Dobriyan 51cc50685a SL*B: drop kmem cache argument from constructor
Kmem cache passed to constructor is only needed for constructors that are
themselves multiplexeres.  Nobody uses this "feature", nor does anybody uses
passed kmem cache in non-trivial way, so pass only pointer to object.

Non-trivial places are:
	arch/powerpc/mm/init_64.c
	arch/powerpc/mm/hugetlbpage.c

This is flag day, yes.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Matt Mackall <mpm@selenic.com>
[akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c]
[akpm@linux-foundation.org: fix mm/slab.c]
[akpm@linux-foundation.org: fix ubifs]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:07 -07:00
Stoyan Gaydarov 0533400b78 [JFFS2] Use .unlocked_ioctl
This changes the .ioctl to the .unlocked_ioctl version.

Signed-off-by: Stoyan Gaydarov <stoyboyker@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-11 18:33:42 +01:00
Linus Torvalds 2c4aabcca8 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
  [MTD][NOR] Add physical address to point() method
  [JFFS2] Track parent inode for directories (for NFS export)
  [JFFS2] Invert last argument of jffs2_gc_fetch_inode(), make it boolean.
  [JFFS2] Quiet lockdep false positive.
  [JFFS2] Clean up jffs2_alloc_inode() and jffs2_i_init_once()
  [MTD] Delete long-unused jedec.h header file.
  [MTD] [NAND] at91_nand: use at91_nand_{en,dis}able consistently.
2008-05-01 11:15:28 -07:00
Jared Hulbert a98889f3d8 [MTD][NOR] Add physical address to point() method
Adding the ability to get a physical address from point() in addition
to virtual address.  This physical address is required for XIP of
userspace code from flash.

Signed-off-by: Jared Hulbert <jaredeh@gmail.com>
Reviewed-by: Jörn Engel <joern@logfs.org>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-05-01 18:59:11 +01:00
David Woodhouse 27c72b040c [JFFS2] Track parent inode for directories (for NFS export)
To support NFS export, we need to know the parent inode of directories.
Rather than growing the jffs2_inode_cache structure, share space with
the nlink field -- which was always set to 1 for directories anyway.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-05-01 18:47:17 +01:00
David Woodhouse 1b690b4878 [JFFS2] Invert last argument of jffs2_gc_fetch_inode(), make it boolean.
We don't actually care about nlink; we only care whether the inode in
question is unlinked or not.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-05-01 17:24:28 +01:00
David Woodhouse 590fe34c47 [JFFS2] Quiet lockdep false positive.
Don't hold f->sem while calling into jffs2_do_create(). It makes lockdep
unhappy, and we don't really need it -- the _reason_ it's a false
positive is because nobody else can see this inode yet and so nobody
will be trying to lock it anyway.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-05-01 15:53:28 +01:00
David Woodhouse 4e571aba7b [JFFS2] Clean up jffs2_alloc_inode() and jffs2_i_init_once()
Ditch a couple of pointless casts from void *, and use the normal
variable name 'f' for jffs2_inode_info pointers -- especially since
it actually shows up in lockdep reports.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-05-01 12:29:37 +01:00
Harvey Harrison 8e24eea728 fs: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:54 -07:00
David Woodhouse 2c61cb250c [JFFS2] Introduce dbg_readinode2 log level, use it to shut read_dnode() up
We haven't seen bugs in this for a while now, since the rewrite. No need
to be _quite_ so verbose...

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-23 16:43:15 +01:00
David Woodhouse 422b120238 [JFFS2] Fix jffs2_reserve_space() when all blocks are pending erasure.
When _all_ the blocks were on the erase_pending_list, we could't find a
block to GC from but there was no _actually_ free space, and
jffs2_reserve_space() would get a little unhappy.

Handle this case by returning -EAGAIN from jffs2_garbage_collect_pass().
There are two callers of that function -- jffs2_flush_wbuf_gc(), which
will interpret it as an error and flush the writebuffer by other means,
and jffs2_reserve_space(), which we modify to respond to -EAGAIN with an
immediate call to jffs2_erase_pending_blocks() and another run round the
loop.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-23 16:01:37 +01:00
David Woodhouse e2bc322bf0 [JFFS2] Add erase_checking_list to hold blocks being marked.
Just to keep the debug code happy when it's adding all the blocks up.
Otherwise, they disappear for a while while the locks are dropped to
check them and write the cleanmarker.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-23 14:15:24 +01:00
Anders Grafström 8a0f572397 [JFFS2] Return values of jffs2_block_check_erase error paths
It looks the error paths in jffs2_block_check_erase() have wrong return 
values. A block that failed to be erased never gets marked as bad.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-23 10:06:46 +01:00
David Woodhouse 19e56ceae7 [JFFS2] Finally remove redundant ref->__totlen field.
Haven't had any complaints about it recently, despite having the test
code enabled to verify that the calculated length is correct.

Kill it off, just by #undef TEST_TOTLEN for now; removing it for real
can come a little later.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-23 01:26:12 +01:00
David Woodhouse 27e6b8e388 [JFFS2] Honour TEST_TOTLEN macro in debugging code. ref->__totlen is going!
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-23 01:25:33 +01:00
David Woodhouse 85a62db624 [JFFS2] Add paranoia debugging for superblock counts
The problem fixed in commit 014b164e13
(space leak with in-band cleanmarkers) would have been caught a lot
quicker if our paranoid debugging mode had included adding up the size
counts from all the eraseblocks and comparing the totals with the counts
in the superblock. Add that.

Make jffs2_mark_erased_block() file the newly-erased block on the
free_list before calling the debug function, to make it happy.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-23 01:24:17 +01:00
David Woodhouse 014b164e13 [JFFS2] Fix free space leak with in-band cleanmarkers
We were accounting for the cleanmarker by calling jffs2_link_node_ref()
(without locking!), which adjusted both superblock and per-eraseblock
accounting, subtracting the size of the cleanmarker from {jeb,c}->free_size
and adding it to {jeb,c}->used_size.

But only _then_ were we adding the size of the newly-erased block back
to the superblock counts, and we were adding each of jeb->{free,used}_size
to the corresponding superblock counts. Thus, the size of the cleanmarker
was effectively subtracted from the superblock's free_size _twice_.

Fix this, by always adding a full eraseblock size to c->free_size when
we've erased a block. And call jffs2_link_node_ref() under the proper
lock, while we're at it.

Thanks to Alexander Yurchenko and/or Damir Shayhutdinov for (almost)
pinpointing the problem.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 23:54:38 +01:00
David Woodhouse cf9d1e428c [JFFS2] Self-sufficient #includes in jffs2_fs_i.h: include <linux/mutex.h>
... instead of <linux/semaphore.h> which we don't need any more anyway.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 23:53:26 +01:00
David Woodhouse ced2207036 [JFFS2] semaphore->mutex conversion
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 15:13:40 +01:00
michael cca1584171 [JFFS2] add write verify on dataflash.
Add the write verification buffer to the dataflash.  The mtd_dataflash has
the CONFIG_DATAFLASH_WRITE_VERIFY so is better a change to Kconfig.

Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 12:35:50 +01:00
David Woodhouse 25dc30b4cd [JFFS2] fix sparse warnings in gc.c
fs/jffs2/gc.c:1147:29: warning: symbol 'jeb' shadows an earlier one
fs/jffs2/gc.c:1084:89: originally declared here
fs/jffs2/gc.c:1197:29: warning: symbol 'jeb' shadows an earlier one
fs/jffs2/gc.c:1084:89: originally declared here

Rename the unused 'jeb' argument to avoid this. We could potentially
remove the argument, but GCC should be doing that anyway.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 12:35:47 +01:00
Harvey Harrison bf66737ca8 [JFFS2] fix sparse warning in write.c
fs/jffs2/write.c:585:28: warning: symbol 'fd' shadows an earlier one
fs/jffs2/write.c:536:27: originally declared here

No need to redeclare fd, use the original one, after this point,
fd is always reassigned before it used again.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 12:35:46 +01:00
David Woodhouse 8ca646abb4 [JFFS2] Fix sparse warning in nodemgmt.c
fs/jffs2/nodemgmt.c:60:8: warning: symbol 'ret' shadows an earlier one
fs/jffs2/nodemgmt.c:45:6: originally declared here

(reported by Harvey Harrison)

Just remove the offending declaration of 'int ret' and use the earlier one.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 12:35:44 +01:00