- Use the ALARM feature check in the alarmtimer core code insted of
the old method of checking for the set_alarm() callback. Drivers
can have that callback set but the feature bit cleared. If such
a RTC device is selected then alarms wont work.
- Use a proper define to let the preprocessor check whether Hyper-V VDSO
clocksource should be active. The code used a constant in an enum with
#ifdef, which evaluates to always false and disabled the clocksource
for VDSO.
-----BEGIN PGP SIGNATURE-----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=TruV
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2021-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two fixes for timers:
- Use the ALARM feature check in the alarmtimer core code insted of
the old method of checking for the set_alarm() callback.
Drivers can have that callback set but the feature bit cleared. If
such a RTC device is selected then alarms wont work.
- Use a proper define to let the preprocessor check whether Hyper-V
VDSO clocksource should be active.
The code used a constant in an enum with #ifdef, which evaluates to
always false and disabled the clocksource for VDSO"
* tag 'timers-urgent-2021-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/hyper-v: Re-enable VDSO_CLOCKMODE_HVCLOCK on X86
alarmtimer: Check RTC features instead of ops
- Reorganize SEV code to streamline and simplify future development
-----BEGIN PGP SIGNATURE-----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=ENfF
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"The three SEV commits are not really urgent material. But we figured
since getting them in now will avoid a huge amount of conflicts
between future SEV changes touching tip, the kvm and probably other
trees, sending them to you now would be best.
The idea is that the tip, kvm etc branches for 5.14 will all base
ontop of -rc2 and thus everything will be peachy. What is more, those
changes are purely mechanical and defines movement so they should be
fine to go now (famous last words).
Summary:
- Enable -Wundef for the compressed kernel build stage
- Reorganize SEV code to streamline and simplify future development"
* tag 'x86_urgent_for_v5.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/compressed: Enable -Wundef
x86/msr: Rename MSR_K8_SYSCFG to MSR_AMD64_SYSCFG
x86/sev: Move GHCB MSR protocol and NAE definitions in a common header
x86/sev-es: Rename sev-es.{ch} to sev.{ch}
Mohammed reports (https://bugzilla.kernel.org/show_bug.cgi?id=213029)
the commit e4ab4658f1 ("clocksource/drivers/hyper-v: Handle vDSO
differences inline") broke vDSO on x86. The problem appears to be that
VDSO_CLOCKMODE_HVCLOCK is an enum value in 'enum vdso_clock_mode' and
'#ifdef VDSO_CLOCKMODE_HVCLOCK' branch evaluates to false (it is not
a define).
Use a dedicated HAVE_VDSO_CLOCKMODE_HVCLOCK define instead.
Fixes: e4ab4658f1 ("clocksource/drivers/hyper-v: Handle vDSO differences inline")
Reported-by: Mohammed Gamal <mgamal@redhat.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210513073246.1715070-1-vkuznets@redhat.com
Some AMD Ryzen generations has different calculation method on maximum
performance. 255 is not for all ASICs, some specific generations should use 166
as the maximum performance. Otherwise, it will report incorrect frequency value
like below:
~ → lscpu | grep MHz
CPU MHz: 3400.000
CPU max MHz: 7228.3198
CPU min MHz: 2200.0000
[ mingo: Tidied up whitespace use. ]
[ Alexander Monakov <amonakov@ispras.ru>: fix 225 -> 255 typo. ]
Fixes: 41ea667227 ("x86, sched: Calculate frequency invariance for AMD systems")
Fixes: 3c55e94c0a ("cpufreq: ACPI: Extend frequency tables to cover boost frequencies")
Reported-by: Jason Bagavatsingham <jason.bagavatsingham@gmail.com>
Fixed-by: Alexander Monakov <amonakov@ispras.ru>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Jason Bagavatsingham <jason.bagavatsingham@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210425073451.2557394-1-ray.huang@amd.com
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211791
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A discussion around -Wundef showed that there were still a few boolean
Kconfigs where #if was used rather than #ifdef to guard different code.
Kconfig doesn't define boolean configs, which can result in -Wundef
warnings.
arch/x86/boot/compressed/Makefile resets the CFLAGS used for this
directory, and doesn't re-enable -Wundef as the top level Makefile does.
If re-added, with RANDOMIZE_BASE and X86_NEED_RELOCS disabled, the
following warnings are visible.
arch/x86/boot/compressed/misc.h:82:5: warning: 'CONFIG_RANDOMIZE_BASE'
is not defined, evaluates to 0 [-Wundef]
^
arch/x86/boot/compressed/misc.c:175:5: warning: 'CONFIG_X86_NEED_RELOCS'
is not defined, evaluates to 0 [-Wundef]
^
Simply fix these and re-enable this warning for this directory.
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210422190450.3903999-1-ndesaulniers@google.com
* Fix virtualization of RDPID
* Virtualization of DR6_BUS_LOCK, which on bare metal is new in
the 5.13 merge window
* More nested virtualization migration fixes (nSVM and eVMCS)
* Fix for KVM guest hibernation
* Fix for warning in SEV-ES SRCU usage
* Block KVM from loading on AMD machines with 5-level page tables,
due to the APM not mentioning how host CR4.LA57 exactly impacts
the guest.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCZWwgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOE9wgAk7Io8cuvnhC9ogVqzZWrPweWqFg8
fJcPMB584JRnMqYHBVYbkTPGe8SsCHKR2MKsNdc4cEP111cyr3suWsxOdmjJn58i
7ahy6PcKx7wWeWwEt7O599l6CeoX5XB9ExvA6eiXAv7iZeOJHFa+Ny2GlWgauy6Y
DELryEomx1r4IUkZaSR+2fYjzvOWTXQixwU/jwx8NcTJz0DrzknzLE7XOciPBfn0
t0Q2rCXdL2nF1uPksZbntx8Qoa6t6GDVIyrH/ZCPQYJtAX6cjxNAh3zwCe+hMnOd
fW8ntBH1nZRiNnberA4IICAzqnUokgPWdKBrZT2ntWHBK+aqxXHznrlPJA==
=e+gD
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Lots of bug fixes.
- Fix virtualization of RDPID
- Virtualization of DR6_BUS_LOCK, which on bare metal is new to this
release
- More nested virtualization migration fixes (nSVM and eVMCS)
- Fix for KVM guest hibernation
- Fix for warning in SEV-ES SRCU usage
- Block KVM from loading on AMD machines with 5-level page tables, due
to the APM not mentioning how host CR4.LA57 exactly impacts the
guest.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (48 commits)
KVM: SVM: Move GHCB unmapping to fix RCU warning
KVM: SVM: Invert user pointer casting in SEV {en,de}crypt helpers
kvm: Cap halt polling at kvm->max_halt_poll_ns
tools/kvm_stat: Fix documentation typo
KVM: x86: Prevent deadlock against tk_core.seq
KVM: x86: Cancel pvclock_gtod_work on module removal
KVM: x86: Prevent KVM SVM from loading on kernels with 5-level paging
KVM: X86: Expose bus lock debug exception to guest
KVM: X86: Add support for the emulation of DR6_BUS_LOCK bit
KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks
KVM: x86: Hide RDTSCP and RDPID if MSR_TSC_AUX probing failed
KVM: x86: Tie Intel and AMD behavior for MSR_TSC_AUX to guest CPU model
KVM: x86: Move uret MSR slot management to common x86
KVM: x86: Export the number of uret MSRs to vendor modules
KVM: VMX: Disable loading of TSX_CTRL MSR the more conventional way
KVM: VMX: Use common x86's uret MSR list as the one true list
KVM: VMX: Use flag to indicate "active" uret MSRs instead of sorting list
KVM: VMX: Configure list of user return MSRs at module init
KVM: x86: Add support for RDPID without RDTSCP
KVM: SVM: Probe and load MSR_TSC_AUX regardless of RDTSCP support in host
...
The SYSCFG MSR continued being updated beyond the K8 family; drop the K8
name from it.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20210427111636.1207-4-brijesh.singh@amd.com
The guest and the hypervisor contain separate macros to get and set
the GHCB MSR protocol and NAE event fields. Consolidate the GHCB
protocol definitions and helper macros in one place.
Leave the supported protocol version define in separate files to keep
the guest and hypervisor flexibility to support different GHCB version
in the same release.
There is no functional change intended.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20210427111636.1207-3-brijesh.singh@amd.com
SEV-SNP builds upon the SEV-ES functionality while adding new hardware
protection. Version 2 of the GHCB specification adds new NAE events that
are SEV-SNP specific. Rename the sev-es.{ch} to sev.{ch} so that all
SEV* functionality can be consolidated in one place.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20210427111636.1207-2-brijesh.singh@amd.com
-----BEGIN PGP SIGNATURE-----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=ksMy
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Borislav Petkov:
"Handle power-gating of AMD IOMMU perf counters properly when they are
used"
* tag 'perf_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/events/amd/iommu: Fix invalid Perf result due to IOMMU PMC power-gating
can also be accounted to it. Along with a consolidation to the guest-specific context
tracking helpers.
- Provide for the host NMI handler running after a VMX VMEXIT to be able to run
on the kernel stack correctly.
- Initialize MSR_TSC_AUX when RDPID is supported and not RDTSCP (virt relevant -
real hw supports both)
- A code generation improvement to TASK_SIZE_MAX through the use of alternatives
- The usual misc. and related cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=O3BS
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"A bunch of things accumulated for x86 in the last two weeks:
- Fix guest vtime accounting so that ticks happening while the guest
is running can also be accounted to it. Along with a consolidation
to the guest-specific context tracking helpers.
- Provide for the host NMI handler running after a VMX VMEXIT to be
able to run on the kernel stack correctly.
- Initialize MSR_TSC_AUX when RDPID is supported and not RDTSCP (virt
relevant - real hw supports both)
- A code generation improvement to TASK_SIZE_MAX through the use of
alternatives
- The usual misc and related cleanups and improvements"
* tag 'x86_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM: x86: Consolidate guest enter/exit logic to common helpers
context_tracking: KVM: Move guest enter/exit wrappers to KVM's domain
context_tracking: Consolidate guest enter/exit wrappers
sched/vtime: Move guest enter/exit vtime accounting to vtime.h
sched/vtime: Move vtime accounting external declarations above inlines
KVM: x86: Defer vtime accounting 'til after IRQ handling
context_tracking: Move guest exit vtime accounting to separate helpers
context_tracking: Move guest exit context tracking to separate helpers
KVM/VMX: Invoke NMI non-IST entry instead of IST entry
x86/cpu: Remove write_tsc() and write_rdtscp_aux() wrappers
x86/cpu: Initialize MSR_TSC_AUX if RDTSCP *or* RDPID is supported
x86/resctrl: Fix init const confusion
x86: Delete UD0, UD1 traces
x86/smpboot: Remove duplicate includes
x86/cpu: Use alternative to generate the TASK_SIZE_MAX constant
-----BEGIN PGP SIGNATURE-----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=YwTw
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.13-2021-05-07' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Mostly fixes for merge window merged code. In detail:
- Error case memory leak fixes (Colin, Zqiang)
- Add the tools/io_uring/ to the list of maintained files (Lukas)
- Set of fixes for the modified buffer registration API (Pavel)
- Sanitize io thread setup on x86 (Stefan)
- Ensure we truncate transfer count for registered buffers (Thadeu)"
* tag 'io_uring-5.13-2021-05-07' of git://git.kernel.dk/linux-block:
x86/process: setup io_threads more like normal user space threads
MAINTAINERS: add io_uring tool to IO_URING
io_uring: truncate lengths larger than MAX_RW_COUNT on provide buffers
io_uring: Fix memory leak in io_sqe_buffers_register()
io_uring: Fix premature return from loop and memory leak
io_uring: fix unchecked error in switch_start()
io_uring: allow empty slots for reg buffers
io_uring: add more build check for uapi
io_uring: dont overlap internal and user req flags
io_uring: fix drain with rsrc CQEs
When an SEV-ES guest is running, the GHCB is unmapped as part of the
vCPU run support. However, kvm_vcpu_unmap() triggers an RCU dereference
warning with CONFIG_PROVE_LOCKING=y because the SRCU lock is released
before invoking the vCPU run support.
Move the GHCB unmapping into the prepare_guest_switch callback, which is
invoked while still holding the SRCU lock, eliminating the RCU dereference
warning.
Fixes: 291bd20d5d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <b2f9b79d15166f2c3e4375c0d9bc3268b7696455.1620332081.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Invert the user pointer params for SEV's helpers for encrypting and
decrypting guest memory so that they take a pointer and cast to an
unsigned long as necessary, as opposed to doing the opposite. Tagging a
non-pointer as __user is confusing and weird since a cast of some form
needs to occur to actually access the user data. This also fixes Sparse
warnings triggered by directly consuming the unsigned longs, which are
"noderef" due to the __user tag.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210506231542.2331138-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
syzbot reported a possible deadlock in pvclock_gtod_notify():
CPU 0 CPU 1
write_seqcount_begin(&tk_core.seq);
pvclock_gtod_notify() spin_lock(&pool->lock);
queue_work(..., &pvclock_gtod_work) ktime_get()
spin_lock(&pool->lock); do {
seq = read_seqcount_begin(tk_core.seq)
...
} while (read_seqcount_retry(&tk_core.seq, seq);
While this is unlikely to happen, it's possible.
Delegate queue_work() to irq_work() which postpones it until the
tk_core.seq write held region is left and interrupts are reenabled.
Fixes: 16e8d74d2d ("KVM: x86: notifier for clocksource changes")
Reported-by: syzbot+6beae4000559d41d80f8@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Message-Id: <87h7jgm1zy.ffs@nanos.tec.linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nothing prevents the following:
pvclock_gtod_notify()
queue_work(system_long_wq, &pvclock_gtod_work);
...
remove_module(kvm);
...
work_queue_run()
pvclock_gtod_work() <- UAF
Ditto for any other operation on that workqueue list head which touches
pvclock_gtod_work after module removal.
Cancel the work in kvm_arch_exit() to prevent that.
Fixes: 16e8d74d2d ("KVM: x86: notifier for clocksource changes")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Message-Id: <87czu4onry.ffs@nanos.tec.linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disallow loading KVM SVM if 5-level paging is supported. In theory, NPT
for L1 should simply work, but there unknowns with respect to how the
guest's MAXPHYADDR will be handled by hardware.
Nested NPT is more problematic, as running an L1 VMM that is using
2-level page tables requires stacking single-entry PDP and PML4 tables in
KVM's NPT for L2, as there are no equivalent entries in L1's NPT to
shadow. Barring hardware magic, for 5-level paging, KVM would need stack
another layer to handle PML5.
Opportunistically rename the lm_root pointer, which is used for the
aforementioned stacking when shadowing 2-level L1 NPT, to pml4_root to
call out that it's specifically for PML4.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210505204221.1934471-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bus lock debug exception is an ability to notify the kernel by an #DB
trap after the instruction acquires a bus lock and is executed when
CPL>0. This allows the kernel to enforce user application throttling or
mitigations.
Existence of bus lock debug exception is enumerated via
CPUID.(EAX=7,ECX=0).ECX[24]. Software can enable these exceptions by
setting bit 2 of the MSR_IA32_DEBUGCTL. Expose the CPUID to guest and
emulate the MSR handling when guest enables it.
Support for this feature was originally developed by Xiaoyao Li and
Chenyi Qiang, but code has since changed enough that this patch has
nothing in common with theirs, except for this commit message.
Co-developed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20210202090433.13441-4-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bus lock debug exception introduces a new bit DR6_BUS_LOCK (bit 11 of
DR6) to indicate that bus lock #DB exception is generated. The set/clear
of DR6_BUS_LOCK is similar to the DR6_RTM. The processor clears
DR6_BUS_LOCK when the exception is generated. For all other #DB, the
processor sets this bit to 1. Software #DB handler should set this bit
before returning to the interrupted task.
In VMM, to avoid breaking the CPUs without bus lock #DB exception
support, activate the DR6_BUS_LOCK conditionally in DR6_FIXED_1 bits.
When intercepting the #DB exception caused by bus locks, bit 11 of the
exit qualification is set to identify it. The VMM should emulate the
exception by clearing the bit 11 of the guest DR6.
Co-developed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20210202090433.13441-3-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If probing MSR_TSC_AUX failed, hide RDTSCP and RDPID, and WARN if either
feature was reported as supported. In theory, such a scenario should
never happen as both Intel and AMD state that MSR_TSC_AUX is available if
RDTSCP or RDPID is supported. But, KVM injects #GP on MSR_TSC_AUX
accesses if probing failed, faults on WRMSR(MSR_TSC_AUX) may be fatal to
the guest (because they happen during early CPU bringup), and KVM itself
has effectively misreported RDPID support in the past.
Note, this also has the happy side effect of omitting MSR_TSC_AUX from
the list of MSRs that are exposed to userspace if probing the MSR fails.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Squish the Intel and AMD emulation of MSR_TSC_AUX together and tie it to
the guest CPU model instead of the host CPU behavior. While not strictly
necessary to avoid guest breakage, emulating cross-vendor "architecture"
will provide consistent behavior for the guest, e.g. WRMSR fault behavior
won't change if the vCPU is migrated to a host with divergent behavior.
Note, the "new" kvm_is_supported_user_return_msr() checks do not add new
functionality on either SVM or VMX. On SVM, the equivalent was
"tsc_aux_uret_slot < 0", and on VMX the check was buried in the
vmx_find_uret_msr() call at the find_uret_msr label.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that SVM and VMX both probe MSRs before "defining" user return slots
for them, consolidate the code for probe+define into common x86 and
eliminate the odd behavior of having the vendor code define the slot for
a given MSR.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split out and export the number of configured user return MSRs so that
VMX can iterate over the set of MSRs without having to do its own tracking.
Keep the list itself internal to x86 so that vendor code still has to go
through the "official" APIs to add/modify entries.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-13-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tag TSX_CTRL as not needing to be loaded when RTM isn't supported in the
host. Crushing the write mask to '0' has the same effect, but requires
more mental gymnastics to understand.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop VMX's global list of user return MSRs now that VMX doesn't resort said
list to isolate "active" MSRs, i.e. now that VMX's list and x86's list have
the same MSRs in the same order.
In addition to eliminating the redundant list, this will also allow moving
more of the list management into common x86.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly flag a uret MSR as needing to be loaded into hardware instead of
resorting the list of "active" MSRs and tracking how many MSRs in total
need to be loaded. The only benefit to sorting the list is that the loop
to load MSRs during vmx_prepare_switch_to_guest() doesn't need to iterate
over all supported uret MRS, only those that are active. But that is a
pointless optimization, as the most common case, running a 64-bit guest,
will load the vast majority of MSRs. Not to mention that a single WRMSR is
far more expensive than iterating over the list.
Providing a stable list order obviates the need to track a given MSR's
"slot" in the per-CPU list of user return MSRs; all lists simply use the
same ordering. Future patches will take advantage of the stable order to
further simplify the related code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Configure the list of user return MSRs that are actually supported at
module init instead of reprobing the list of possible MSRs every time a
vCPU is created. Curating the list on a per-vCPU basis is pointless; KVM
is completely hosed if the set of supported MSRs changes after module init,
or if the set of MSRs differs per physical PCU.
The per-vCPU lists also increase complexity (see __vmx_find_uret_msr()) and
creates corner cases that _should_ be impossible, but theoretically exist
in KVM, e.g. advertising RDTSCP to userspace without actually being able to
virtualize RDTSCP if probing MSR_TSC_AUX fails.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow userspace to enable RDPID for a guest without also enabling RDTSCP.
Aside from checking for RDPID support in the obvious flows, VMX also needs
to set ENABLE_RDTSCP=1 when RDPID is exposed.
For the record, there is no known scenario where enabling RDPID without
RDTSCP is desirable. But, both AMD and Intel architectures allow for the
condition, i.e. this is purely to make KVM more architecturally accurate.
Fixes: 41cd02c6f7 ("kvm: x86: Expose RDPID in KVM_GET_SUPPORTED_CPUID")
Cc: stable@vger.kernel.org
Reported-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Probe MSR_TSC_AUX whether or not RDTSCP is supported in the host, and
if probing succeeds, load the guest's MSR_TSC_AUX into hardware prior to
VMRUN. Because SVM doesn't support interception of RDPID, RDPID cannot
be disallowed in the guest (without resorting to binary translation).
Leaving the host's MSR_TSC_AUX in hardware would leak the host's value to
the guest if RDTSCP is not supported.
Note, there is also a kernel bug that prevents leaking the host's value.
The host kernel initializes MSR_TSC_AUX if and only if RDTSCP is
supported, even though the vDSO usage consumes MSR_TSC_AUX via RDPID.
I.e. if RDTSCP is not supported, there is no host value to leak. But,
if/when the host kernel bug is fixed, KVM would start leaking MSR_TSC_AUX
in the case where hardware supports RDPID but RDTSCP is unavailable for
whatever reason.
Probing MSR_TSC_AUX will also allow consolidating the probe and define
logic in common x86, and will make it simpler to condition the existence
of MSR_TSX_AUX (from the guest's perspective) on RDTSCP *or* RDPID.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disable preemption when probing a user return MSR via RDSMR/WRMSR. If
the MSR holds a different value per logical CPU, the WRMSR could corrupt
the host's value if KVM is preempted between the RDMSR and WRMSR, and
then rescheduled on a different CPU.
Opportunistically land the helper in common x86, SVM will use the helper
in a future commit.
Fixes: 4be5341026 ("KVM: VMX: Initialize vmx->guest_msrs[] right after allocation")
Cc: stable@vger.kernel.org
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-6-seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a dedicated intercept enum for RDPID instead of piggybacking RDTSCP.
Unlike VMX's ENABLE_RDTSCP, RDPID is not bound to SVM's RDTSCP intercept.
Fixes: fb6d4d340e ("KVM: x86: emulate RDPID")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-5-seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intercept RDTSCP to inject #UD if RDTSC is disabled in the guest.
Note, SVM does not support intercepting RDPID. Unlike VMX's
ENABLE_RDTSCP control, RDTSCP interception does not apply to RDPID. This
is a benign virtualization hole as the host kernel (incorrectly) sets
MSR_TSC_AUX if RDTSCP is supported, and KVM loads the guest's MSR_TSC_AUX
into hardware if RDTSCP is supported in the host, i.e. KVM will not leak
the host's MSR_TSC_AUX to the guest.
But, when the kernel bug is fixed, KVM will start leaking the host's
MSR_TSC_AUX if RDPID is supported in hardware, but RDTSCP isn't available
for whatever reason. This leak will be remedied in a future commit.
Fixes: 46896c73c1 ("KVM: svm: add support for RDTSCP")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-4-seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not advertise emulation support for RDPID if RDTSCP is unsupported.
RDPID emulation subtly relies on MSR_TSC_AUX to exist in hardware, as
both vmx_get_msr() and svm_get_msr() will return an error if the MSR is
unsupported, i.e. ctxt->ops->get_msr() will fail and the emulator will
inject a #UD.
Note, RDPID emulation also relies on RDTSCP being enabled in the guest,
but this is a KVM bug and will eventually be fixed.
Fixes: fb6d4d340e ("KVM: x86: emulate RDPID")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-3-seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clear KVM's RDPID capability if the ENABLE_RDTSCP secondary exec control is
unsupported. Despite being enumerated in a separate CPUID flag, RDPID is
bundled under the same VMCS control as RDTSCP and will #UD in VMX non-root
if ENABLE_RDTSCP is not enabled.
Fixes: 41cd02c6f7 ("kvm: x86: Expose RDPID in KVM_GET_SUPPORTED_CPUID")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-2-seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While in most cases, when returning to use the VMCB01,
the exit reason stored in it will be SVM_EXIT_VMRUN,
on first VM exit after a nested migration this field
can contain anything since the VM entry did happen
before the migration.
Remove this warning to avoid the false positive.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210504143936.1644378-3-mlevitsk@redhat.com>
Fixes: 9a7de6ecc3 ("KVM: nSVM: If VMRUN is single-stepped, queue the #DB intercept in nested_svm_vmexit()")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While usually the L1's GIF is set while L2 runs, and usually
migration nested state is loaded after a vCPU reset which
also sets L1's GIF to true, this is not guaranteed.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210504143936.1644378-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In ioctl KVM_X86_SET_MSR_FILTER, input from user space is validated
after a memdup_user(). For invalid inputs we'd memdup and then call
kfree unnecessarily. Hoist input validation to avoid kfree altogether.
Signed-off-by: Siddharth Chandrasekaran <sidcha@amazon.de>
Message-Id: <20210503122111.13775-1-sidcha@amazon.de>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When enlightened VMCS is in use and nested state is migrated with
vmx_get_nested_state()/vmx_set_nested_state() KVM can't map evmcs
page right away: evmcs gpa is not 'struct kvm_vmx_nested_state_hdr'
and we can't read it from VP assist page because userspace may decide
to restore HV_X64_MSR_VP_ASSIST_PAGE after restoring nested state
(and QEMU, for example, does exactly that). To make sure eVMCS is
mapped /vmx_set_nested_state() raises KVM_REQ_GET_NESTED_STATE_PAGES
request.
Commit f2c7ef3ba9 ("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES
on nested vmexit") added KVM_REQ_GET_NESTED_STATE_PAGES clearing to
nested_vmx_vmexit() to make sure MSR permission bitmap is not switched
when an immediate exit from L2 to L1 happens right after migration (caused
by a pending event, for example). Unfortunately, in the exact same
situation we still need to have eVMCS mapped so
nested_sync_vmcs12_to_shadow() reflects changes in VMCS12 to eVMCS.
As a band-aid, restore nested_get_evmcs_page() when clearing
KVM_REQ_GET_NESTED_STATE_PAGES in nested_vmx_vmexit(). The 'fix' is far
from being ideal as we can't easily propagate possible failures and even if
we could, this is most likely already too late to do so. The whole
'KVM_REQ_GET_NESTED_STATE_PAGES' idea for mapping eVMCS after migration
seems to be fragile as we diverge too much from the 'native' path when
vmptr loading happens on vmx_set_nested_state().
Fixes: f2c7ef3ba9 ("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210503150854.1144255-2-vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simplify the code by making PV features shutdown happen in one place.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210414123544.1060604-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Crash shutdown handler only disables kvmclock and steal time, other PV
features remain active so we risk corrupting memory or getting some
side-effects in kdump kernel. Move crash handler to kvm.c and unify
with CPU offline.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210414123544.1060604-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currenly, we disable kvmclock from machine_shutdown() hook and this
only happens for boot CPU. We need to disable it for all CPUs to
guard against memory corruption e.g. on restore from hibernate.
Note, writing '0' to kvmclock MSR doesn't clear memory location, it
just prevents hypervisor from updating the location so for the short
while after write and while CPU is still alive, the clock remains usable
and correct so we don't need to switch to some other clocksource.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210414123544.1060604-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Various PV features (Async PF, PV EOI, steal time) work through memory
shared with hypervisor and when we restore from hibernation we must
properly teardown all these features to make sure hypervisor doesn't
write to stale locations after we jump to the previously hibernated kernel
(which can try to place anything there). For secondary CPUs the job is
already done by kvm_cpu_down_prepare(), register syscore ops to do
the same for boot CPU.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210414123544.1060604-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On certain AMD platforms, when the IOMMU performance counter source
(csource) field is zero, power-gating for the counter is enabled, which
prevents write access and returns zero for read access.
This can cause invalid perf result especially when event multiplexing
is needed (i.e. more number of events than available counters) since
the current logic keeps track of the previously read counter value,
and subsequently re-program the counter to continue counting the event.
With power-gating enabled, we cannot gurantee successful re-programming
of the counter.
Workaround this issue by :
1. Modifying the ordering of setting/reading counters and enabing/
disabling csources to only access the counter when the csource
is set to non-zero.
2. Since AMD IOMMU PMU does not support interrupt mode, the logic
can be simplified to always start counting with value zero,
and accumulate the counter value when stopping without the need
to keep track and reprogram the counter with the previously read
counter value.
This has been tested on systems with and without power-gating.
Fixes: 994d6608ef ("iommu/amd: Remove performance counter pre-initialization test")
Suggested-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210504065236.4415-1-suravee.suthikulpanit@amd.com
As io_threads are fully set up USER threads it's clearer to separate the
code path from the KTHREAD logic.
The only remaining difference to user space threads is that io_threads
never return to user space again. Instead they loop within the given
worker function.
The fact that they never return to user space means they don't have an
user space thread stack. In order to indicate that to tools like gdb we
reset the stack and instruction pointers to 0.
This allows gdb attach to user space processes using io-uring, which like
means that they have io_threads, without printing worrying message like
this:
warning: Selected architecture i386:x86-64 is not compatible with reported target architecture i386
warning: Architecture rejected target-supplied description
The output will be something like this:
(gdb) info threads
Id Target Id Frame
* 1 LWP 4863 "io_uring-cp-for" syscall () at ../sysdeps/unix/sysv/linux/x86_64/syscall.S:38
2 LWP 4864 "iou-mgr-4863" 0x0000000000000000 in ?? ()
3 LWP 4865 "iou-wrk-4863" 0x0000000000000000 in ?? ()
(gdb) thread 3
[Switching to thread 3 (LWP 4865)]
#0 0x0000000000000000 in ?? ()
(gdb) bt
#0 0x0000000000000000 in ?? ()
Backtrace stopped: Cannot access memory at address 0x0
Fixes: 4727dc20e0 ("arch: setup PF_IO_WORKER threads like PF_KTHREAD")
Link: https://lore.kernel.org/io-uring/044d0bad-6888-a211-e1d3-159a4aeed52d@polymtl.ca/T/#m1bbf5727e3d4e839603f6ec7ed79c7eebfba6267
Signed-off-by: Stefan Metzmacher <metze@samba.org>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Andy Lutomirski <luto@kernel.org>
cc: linux-kernel@vger.kernel.org
cc: io-uring@vger.kernel.org
cc: x86@kernel.org
Link: https://lore.kernel.org/r/20210505110310.237537-1-metze@samba.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the enter/exit logic in {svm,vmx}_vcpu_enter_exit() to common
helpers. Opportunistically update the somewhat stale comment about the
updates needing to occur immediately after VM-Exit.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210505002735.1684165-9-seanjc@google.com
Defer the call to account guest time until after servicing any IRQ(s)
that happened in the guest or immediately after VM-Exit. Tick-based
accounting of vCPU time relies on PF_VCPU being set when the tick IRQ
handler runs, and IRQs are blocked throughout the main sequence of
vcpu_enter_guest(), including the call into vendor code to actually
enter and exit the guest.
This fixes a bug where reported guest time remains '0', even when
running an infinite loop in the guest:
https://bugzilla.kernel.org/show_bug.cgi?id=209831
Fixes: 87fa7f3e98 ("x86/kvm: Move context tracking where it belongs")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210505002735.1684165-4-seanjc@google.com
In VMX, the host NMI handler needs to be invoked after NMI VM-Exit.
Before commit 1a5488ef0d ("KVM: VMX: Invoke NMI handler via indirect
call instead of INTn"), this was done by INTn ("int $2"). But INTn
microcode is relatively expensive, so the commit reworked NMI VM-Exit
handling to invoke the kernel handler by function call.
But this missed a detail. The NMI entry point for direct invocation is
fetched from the IDT table and called on the kernel stack. But on 64-bit
the NMI entry installed in the IDT expects to be invoked on the IST stack.
It relies on the "NMI executing" variable on the IST stack to work
correctly, which is at a fixed position in the IST stack. When the entry
point is unexpectedly called on the kernel stack, the RSP-addressed "NMI
executing" variable is obviously also on the kernel stack and is
"uninitialized" and can cause the NMI entry code to run in the wrong way.
Provide a non-ist entry point for VMX which shares the C-function with
the regular NMI entry and invoke the new asm entry point instead.
On 32-bit this just maps to the regular NMI entry point as 32-bit has no
ISTs and is not affected.
[ tglx: Made it independent for backporting, massaged changelog ]
Fixes: 1a5488ef0d ("KVM: VMX: Invoke NMI handler via indirect call instead of INTn")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Lai Jiangshan <laijs@linux.alibaba.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87r1imi8i1.ffs@nanos.tec.linutronix.de
Merge more updates from Andrew Morton:
"The remainder of the main mm/ queue.
143 patches.
Subsystems affected by this patch series (all mm): pagecache, hugetlb,
userfaultfd, vmscan, compaction, migration, cma, ksm, vmstat, mmap,
kconfig, util, memory-hotplug, zswap, zsmalloc, highmem, cleanups, and
kfence"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (143 commits)
kfence: use power-efficient work queue to run delayed work
kfence: maximize allocation wait timeout duration
kfence: await for allocation using wait_event
kfence: zero guard page after out-of-bounds access
mm/process_vm_access.c: remove duplicate include
mm/mempool: minor coding style tweaks
mm/highmem.c: fix coding style issue
btrfs: use memzero_page() instead of open coded kmap pattern
iov_iter: lift memzero_page() to highmem.h
mm/zsmalloc: use BUG_ON instead of if condition followed by BUG.
mm/zswap.c: switch from strlcpy to strscpy
arm64/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
x86/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
mm,memory_hotplug: add kernel boot option to enable memmap_on_memory
acpi,memhotplug: enable MHP_MEMMAP_ON_MEMORY when supported
mm,memory_hotplug: allocate memmap from the added memory range
mm,memory_hotplug: factor out adjusting present pages into adjust_present_page_count()
mm,memory_hotplug: relax fully spanned sections check
drivers/base/memory: introduce memory_block_{online,offline}
mm/memory_hotplug: remove broken locking of zone PCP structures during hot remove
...
Linus Torvalds
Vitaly Kuznetsov
Huang Rui
Nick Desaulniers
Brijesh Singh
Tom Lendacky
Sean Christopherson
Thomas Gleixner
Paolo Bonzini
Chenyi Qiang
Maxim Levitsky
Siddharth Chandrasekaran
Suravee Suthikulpanit
Stefan Metzmacher
Wanpeng Li
Lai Jiangshan