Since commit dccd2304cc ("ARM: 7430/1: sizes.h: move from asm-generic
to <linux/sizes.h>"), <asm/sizes.h> and <asm-generic/sizes.h> are just
wrappers of <linux/sizes.h>.
This commit replaces all <asm/sizes.h> and <asm-generic/sizes.h> to
prepare for the removal.
Link: http://lkml.kernel.org/r/1553267665-27228-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
linux/dax.h is included more than once.
Link: http://lkml.kernel.org/r/5c867e95.1c69fb81.4f15a.e5e4@mx.google.com
Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Acked-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
linux/xattr.h is included more than once.
Link: http://lkml.kernel.org/r/5c86803d.1c69fb81.1a7c6.2b78@mx.google.com
Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Acked-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This file uses "task" 85 times and "tsk" 25 times. It is better to be
consistent.
Link: http://lkml.kernel.org/r/20181129180547.15976-1-avagin@gmail.com
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
linux/poll.h is included more than once.
Link: http://lkml.kernel.org/r/5c86820f.1c69fb81.149f0.0834@mx.google.com
Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Acked-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For ipcmni_extend mode, the sequence number space is only 7 bits. So
the chance of id reuse is relatively high compared with the non-extended
mode.
To alleviate this id reuse problem, this patch enables cyclic allocation
for the index to the radix tree (idx). The disadvantage is that this
can cause a slight slow-down of the fast path, as the radix tree could
be higher than necessary.
To limit the radix tree height, I have chosen the following limits:
1) The cycling is done over in_use*1.5.
2) At least, the cycling is done over
"normal" ipcnmi mode: RADIX_TREE_MAP_SIZE elements
"ipcmni_extended": 4096 elements
Result:
- for normal mode:
No change for <= 42 active ipc elements. With more than 42
active ipc elements, a 2nd level would be added to the radix
tree.
Without cyclic allocation, a 2nd level would be added only with
more than 63 active elements.
- for extended mode:
Cycling creates always at least a 2-level radix tree.
With more than 2730 active objects, a 3rd level would be
added, instead of > 4095 active objects until the 3rd level
is added without cyclic allocation.
For a 2-level radix tree compared to a 1-level radix tree, I have
observed < 1% performance impact.
Notes:
1) Normal "x=semget();y=semget();" is unaffected: Then the idx
is e.g. a and a+1, regardless if idr_alloc() or idr_alloc_cyclic()
is used.
2) The -1% happens in a microbenchmark after this situation:
x=semget();
for(i=0;i<4000;i++) {t=semget();semctl(t,0,IPC_RMID);}
y=semget();
Now perform semget calls on x and y that do not sleep.
3) The worst-case reuse cycle time is unfortunately unaffected:
If you have 2^24-1 ipc objects allocated, and get/remove the last
possible element in a loop, then the id is reused after 128
get/remove pairs.
Performance check:
A microbenchmark that performes no-op semop() randomly on two IDs,
with only these two IDs allocated.
The IDs were set using /proc/sys/kernel/sem_next_id.
The test was run 5 times, averages are shown.
1 & 2: Base (6.22 seconds for 10.000.000 semops)
1 & 40: -0.2%
1 & 3348: - 0.8%
1 & 27348: - 1.6%
1 & 15777204: - 3.2%
Or: ~12.6 cpu cycles per additional radix tree level.
The cpu is an Intel I3-5010U. ~1300 cpu cycles/syscall is slower
than what I remember (spectre impact?).
V2 of the patch:
- use "min" and "max"
- use RADIX_TREE_MAP_SIZE * RADIX_TREE_MAP_SIZE instead of
(2<<12).
[akpm@linux-foundation.org: fix max() warning]
Link: http://lkml.kernel.org/r/20190329204930.21620-3-longman@redhat.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Waiman Long <longman@redhat.com>
Cc: "Luis R. Rodriguez" <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rewrite, based on the patch from Waiman Long:
The mixing in of a sequence number into the IPC IDs is probably to avoid
ID reuse in userspace as much as possible. With ipcmni_extend mode, the
number of usable sequence numbers is greatly reduced leading to higher
chance of ID reuse.
To address this issue, we need to conserve the sequence number space as
much as possible. Right now, the sequence number is incremented for
every new ID created. In reality, we only need to increment the
sequence number when new allocated ID is not greater than the last one
allocated. It is in such case that the new ID may collide with an
existing one. This is being done irrespective of the ipcmni mode.
In order to avoid any races, the index is first allocated and then the
pointer is replaced.
Changes compared to the initial patch:
- Handle failures from idr_alloc().
- Avoid that concurrent operations can see the wrong sequence number.
(This is achieved by using idr_replace()).
- IPCMNI_SEQ_SHIFT is not a constant, thus renamed to
ipcmni_seq_shift().
- IPCMNI_SEQ_MAX is not a constant, thus renamed to ipcmni_seq_max().
Link: http://lkml.kernel.org/r/20190329204930.21620-2-longman@redhat.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Luis R. Rodriguez" <mcgrof@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The maximum number of unique System V IPC identifiers was limited to
32k. That limit should be big enough for most use cases.
However, there are some users out there requesting for more, especially
those that are migrating from Solaris which uses 24 bits for unique
identifiers. To satisfy the need of those users, a new boot time kernel
option "ipcmni_extend" is added to extend the IPCMNI value to 16M. This
is a 512X increase which should be big enough for users out there that
need a large number of unique IPC identifier.
The use of this new option will change the pattern of the IPC
identifiers returned by functions like shmget(2). An application that
depends on such pattern may not work properly. So it should only be
used if the users really need more than 32k of unique IPC numbers.
This new option does have the side effect of reducing the maximum number
of unique sequence numbers from 64k down to 128. So it is a trade-off.
The computation of a new IPC id is not done in the performance critical
path. So a little bit of additional overhead shouldn't have any real
performance impact.
Link: http://lkml.kernel.org/r/20190329204930.21620-1-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Luis R. Rodriguez" <mcgrof@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Our msg priorities became an rbtree as of d6629859b3 ("ipc/mqueue:
improve performance of send/recv"). However, consuming a msg in
msg_get() remains logarithmic (still being better than the case before
of course). By applying well known techniques to cache pointers we can
have the node with the highest priority in O(1), which is specially nice
for the rt cases. Furthermore, some callers can call msg_get() in a
loop.
A new msg_tree_erase() helper is also added to encapsulate the tree
removal and node_cache game. Passes ltp mq testcases.
Link: http://lkml.kernel.org/r/20190321190216.1719-2-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We already store the current task fo the new waiter before calling
wq_sleep() in both send and recv paths. Trivially remove the redundant
assignment.
Link: http://lkml.kernel.org/r/20190321190216.1719-1-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The clk rate is always stored in clk_core but might be out of date and
require calls to update from hardware.
Deal with that case by printing a (c) suffix.
Link: http://lkml.kernel.org/r/1a474318982a5f0125f2360c4161029b17f56bd1.1556881728.git.leonard.crestez@nxp.com
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
An incorrect argument to list_for_each is an internal error in gdb
scripts so a TypeError should be raised. The gdb.GdbError exception
type is intended for user errors such as incorrect invocation.
Drop the type assertion in list_for_each_entry because list_for_each
isn't going to suddenly yield something else.
Applies to both list and hlist
Link: http://lkml.kernel.org/r/c1d3fd4db13d999a3ba57f5bbc1924862d824f61.1556881728.git.leonard.crestez@nxp.com
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Finding an individual clk_core requires walking the tree which can be
quite complicated so add a helper for easy access.
(gdb) print *(struct clk_scu*)$lx_clk_core_lookup("uart0_clk")->hw
Link: http://lkml.kernel.org/r/Message-ID:
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add an lx-clk-summary command which prints a subset of
/sys/kernel/debug/clk/clk_summary.
This can be used to examine hangs caused by clk not being enabled.
Link: http://lkml.kernel.org/r/Message-ID:
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These scripts have some pep8 style warnings. Fix them up so that this
directory is all pep8 clean.
Link: http://lkml.kernel.org/r/20190329220844.38234-6-swboyd@chromium.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jackie Liu <liuyun01@kylinos.cn>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement a command to print the timer list, much like how
/proc/timer_list is implemented. This can be used to look at the
pending timers on a crashed system.
[swboyd@chromium.org: v2]
Link: http://lkml.kernel.org/r/20190329220844.38234-5-swboyd@chromium.org
Link: http://lkml.kernel.org/r/20190325184522.260535-5-swboyd@chromium.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jackie Liu <liuyun01@kylinos.cn>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement gdb functions for rb_first(), rb_last(), rb_next(), and
rb_prev(). These can be useful to iterate through the kernel's
red-black trees.
[swboyd@chromium.org: v2]
Link: http://lkml.kernel.org/r/20190329220844.38234-4-swboyd@chromium.org
Link: http://lkml.kernel.org/r/20190325184522.260535-4-swboyd@chromium.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jackie Liu <liuyun01@kylinos.cn>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
lx-configdump <file> dumps the contents of the gzipped .config to a text
file when the config is included in the kernel with CONFIG_IKCONFIG. By
default, the file written is called config.txt, but it can be any user
supplied filename as well. If the kernel config is in a module
(configs.ko), then it can be loaded along with symbols for the module
loaded with 'lx-symbols' and then this command will still work.
Obviously if you have the whole vmlinux then this can also be achieved
with scripts/extract-ikconfig, but this gdb script can be useful to
confirm that the memory contents of the config in memory and the vmlinux
contents on disk match what is expected.
[swboyd@chromium.org: v2]
Link: http://lkml.kernel.org/r/20190329220844.38234-3-swboyd@chromium.org
Link: http://lkml.kernel.org/r/20190325184522.260535-3-swboyd@chromium.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jackie Liu <liuyun01@kylinos.cn>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "gdb script for kconfig and timer list".
This is a handful of changes to the kernel's gdb scripts to do some more
debugging with kgdb. The first patch allows the vmlinux to be reloaded
from where it was specified on the command line so that this set of
scripts can be used from anywhere. The second patch adds a script to
dump the config.gz to a file on the host debugging machine. The third
patch adds some rb tree utilities and the last patch uses those rb tree
walking utilities to dump out the contents of /proc/timer_list from a
system under debug.
This patch (of 5):
If I run 'gdb <path/to/vmlinux>' and there's the vmlinux-gdb.py file
there I can properly see symbols and use the lx commands provided by the
GDB scripts. But once I run 'lx-symbols' at the command prompt, gdb
reloads the vmlinux symbols assuming that this script was run from the
directory that has vmlinux at the root. That isn't always true, but we
could just look and see what symbols were already loaded and use that
instead. Let's do that so this can work by being invoked anywhere.
Link: http://lkml.kernel.org/r/20190325184522.260535-2-swboyd@chromium.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jackie Liu <liuyun01@kylinos.cn>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch implements the PPS ECHO functionality for pps-gpio, that
sysfs claims is available already.
Configuration is done via device tree bindings.
No changes are made to userspace interfaces.
This patch was originally written by Lukas Senger as part of a masters
thesis project and modified for inclusion into the linux kernel by Tom
Burkart.
Link: http://lkml.kernel.org/r/20190324043305.6627-4-tom@aussec.com
Signed-off-by: Tom Burkart <tom@aussec.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Lukas Senger <lukas@fridolin.com>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch implements the device tree binding changes required for the
PPS ECHO functionality for pps-gpio, that sysfs claims is available
already.
It adds two DT properties for configuring the PPS ECHO functionality.
This patch is provided separated from the rest of the patch per
Documentation/devicetree/bindings/submitting-patches.txt.
This patch was originally written by Lukas Senger as part of a masters
thesis project and modified for inclusion into the linux kernel by Tom
Burkart.
Link: http://lkml.kernel.org/r/20190324043305.6627-3-tom@aussec.com
Signed-off-by: Tom Burkart <tom@aussec.com>
Signed-off-by: Lukas Senger <lukas@fridolin.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch changes the GPIO access for the pps-gpio driver from the
integer based API to the descriptor based API.
The integer based API is considered deprecated and the descriptor based
API is the preferred way to access GPIOs as per
Documentation/driver-api/gpio/intro.rst
No changes are made to userspace interfaces.
Link: http://lkml.kernel.org/r/20190324043305.6627-2-tom@aussec.com
Signed-off-by: Tom Burkart <tom@aussec.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Lukas Senger <lukas@fridolin.com>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow specifying reboot_mode for panic only. This is needed on systems
where ramoops is used to store panic logs, and user wants to use warm
reset to preserve those, while still having cold reset on normal
reboots.
Link: http://lkml.kernel.org/r/20190322004735.27702-1-aaro.koskinen@iki.fi
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When kernel panic happens, it will first print the panic call stack,
then the ending msg like:
[ 35.743249] ---[ end Kernel panic - not syncing: Fatal exception
[ 35.749975] ------------[ cut here ]------------
The above message are very useful for debugging.
But if system is configured to not reboot on panic, say the
"panic_timeout" parameter equals 0, it will likely print out many noisy
message like WARN() call stack for each and every CPU except the panic
one, messages like below:
WARNING: CPU: 1 PID: 280 at kernel/sched/core.c:1198 set_task_cpu+0x183/0x190
Call Trace:
<IRQ>
try_to_wake_up
default_wake_function
autoremove_wake_function
__wake_up_common
__wake_up_common_lock
__wake_up
wake_up_klogd_work_func
irq_work_run_list
irq_work_tick
update_process_times
tick_sched_timer
__hrtimer_run_queues
hrtimer_interrupt
smp_apic_timer_interrupt
apic_timer_interrupt
For people working in console mode, the screen will first show the panic
call stack, but immediately overridden by these noisy extra messages,
which makes debugging much more difficult, as the original context gets
lost on screen.
Also these noisy messages will confuse some users, as I have seen many bug
reporters posted the noisy message into bugzilla, instead of the real
panic call stack and context.
Adding a flag "suppress_printk" which gets set in panic() to avoid those
noisy messages, without changing current kernel behavior that both panic
blinking and sysrq magic key can work as is, suggested by Petr Mladek.
To verify this, make sure kernel is not configured to reboot on panic and
in console
# echo c > /proc/sysrq-trigger
to see if console only prints out the panic call stack.
Link: http://lkml.kernel.org/r/1551430186-24169-1-git-send-email-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
LLVM uses profiling data that's deliberately similar to GCC, but has a
very different way of exporting that data. LLVM calls llvm_gcov_init()
once per module, and provides a couple of callbacks that we can use to
ask for more data.
We care about the "writeout" callback, which in turn calls back into
compiler-rt/this module to dump all the gathered coverage data to disk:
llvm_gcda_start_file()
llvm_gcda_emit_function()
llvm_gcda_emit_arcs()
llvm_gcda_emit_function()
llvm_gcda_emit_arcs()
[... repeats for each function ...]
llvm_gcda_summary_info()
llvm_gcda_end_file()
This design is much more stateless and unstructured than gcc's, and is
intended to run at process exit. This forces us to keep some local
state about which module we're dealing with at the moment. On the other
hand, it also means we don't depend as much on how LLVM represents
profiling data internally.
See LLVM's lib/Transforms/Instrumentation/GCOVProfiling.cpp for more
details on how this works, particularly GCOVProfiler::emitProfileArcs(),
GCOVProfiler::insertCounterWriteout(), and GCOVProfiler::insertFlush().
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20190417225328.208129-1-trong@android.com
Signed-off-by: Greg Hackmann <ghackmann@android.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Tri Vo <trong@android.com>
Co-developed-by: Nick Desaulniers <ndesaulniers@google.com>
Co-developed-by: Tri Vo <trong@android.com>
Tested-by: Trilok Soni <tsoni@quicinc.com>
Tested-by: Prasad Sodagudi <psodagud@quicinc.com>
Tested-by: Tri Vo <trong@android.com>
Tested-by: Daniel Mentz <danielmentz@google.com>
Tested-by: Petri Gynther <pgynther@google.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Document some things of note to gcov users:
1. GCC gcov and Clang llvm-cov tools are not compatible.
2. The use of GCC vs Clang is transparent at build-time.
Also adjust the documentation to account for the removal of config symbol
CONFIG_GCOV_FORMAT_AUTODETECT by commit 6a61b70b43 ("gcov: remove
CONFIG_GCOV_FORMAT_AUTODETECT").
Link: http://lkml.kernel.org/r/20190318025411.98014-4-trong@android.com
Signed-off-by: Tri Vo <trong@android.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Greg Hackmann <ghackmann@android.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Petri Gynther <pgynther@google.com>
Cc: Prasad Sodagudi <psodagud@quicinc.com>
Cc: Trilok Soni <tsoni@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "gcov: add Clang support", v4.
This patch (of 3):
base.c contains a few callbacks specific to GCC's gcov implementation.
Move these into their own module in preparation for Clang support.
Link: http://lkml.kernel.org/r/20190318025411.98014-2-trong@android.com
Signed-off-by: Greg Hackmann <ghackmann@android.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Tri Vo <trong@android.com>
Tested-by: Trilok Soni <tsoni@quicinc.com>
Tested-by: Prasad Sodagudi <psodagud@quicinc.com>
Tested-by: Tri Vo <trong@android.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Petri Gynther <pgynther@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix sparse warning:
fs/eventfd.c:26:1: warning:
symbol 'eventfd_ida' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20190413142348.34716-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Finding endpoints of an IPC channel is one of essential task to
understand how a user program works. Procfs and netlink socket provide
enough hints to find endpoints for IPC channels like pipes, unix
sockets, and pseudo terminals. However, there is no simple way to find
endpoints for an eventfd file from userland. An inode number doesn't
hint. Unlike pipe, all eventfd files share the same inode object.
To provide the way to find endpoints of an eventfd file, this patch adds
"eventfd-id" field to /proc/PID/fdinfo of eventfd as identifier.
Integers managed by an IDA are used as ids.
A tool like lsof can utilize the information to print endpoints.
Link: http://lkml.kernel.org/r/20190327181823.20222-1-yamato@redhat.com
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hash functions are not needed since idr is used now. Let's remove hash
header file for cleanup.
Link: http://lkml.kernel.org/r/20190430053319.95913-1-scuttimmy@gmail.com
Signed-off-by: Timmy Li <scuttimmy@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: KJ Tsanaktsidis <ktsanaktsidis@zendesk.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Today, proc_do_large_bitmap() truncates a large write input buffer to
PAGE_SIZE - 1, which may result in misparsed numbers at the (truncated)
end of the buffer. Further, it fails to notify the caller that the
buffer was truncated, so it doesn't get called iteratively to finish the
entire input buffer.
Tell the caller if there's more work to do by adding the skipped amount
back to left/*lenp before returning.
To fix the misparsing, reset the position if we have completely consumed
a truncated buffer (or if just one char is left, which may be a "-" in a
range), and ask the caller to come back for more.
Link: http://lkml.kernel.org/r/20190320222831.8243-7-mcgrof@kernel.org
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel has only two users of proc_do_large_bitmap(), the kernel CPU
watchdog, and the ip_local_reserved_ports. Refer to watchdog_cpumask
and ip_local_reserved_ports in Documentation for further details on
these. When you input a large buffer into these, when it is larger than
PAGE_SIZE- 1, the input data gets misparsed, and the user get
incorrectly informed that the desired input value was set. This commit
implements a test which mimics and exploits that use case, it uses a
bitmap size, as in the watchdog case. The bitmap is used to test the
bitmap proc handler, proc_do_large_bitmap().
The next commit fixes this issue.
[akpm@linux-foundation.org: move proc_do_large_bitmap() export to EOF]
[mcgrof@kernel.org: use new target description for backward compatibility]
[mcgrof@kernel.org: augment test number to 50, ran into issues with bash string comparisons when testing up to 50 cases.]
[mcgrof@kernel.org: introduce and use verify_diff_proc_file() to use diff]
[mcgrof@kernel.org: use mktemp for tmp file]
[mcgrof@kernel.org: merge shell test and C code]
[mcgrof@kernel.org: commit log love]
[mcgrof@kernel.org: export proc_do_large_bitmap() to allow for the test
[mcgrof@kernel.org: check for the return value when writing to the proc file]
Link: http://lkml.kernel.org/r/20190320222831.8243-6-mcgrof@kernel.org
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On old kernels older new test knobs implemented on the test_sysctl
module may not be available. This is expected, and the selftests test
scripts should be able to run without failures on older kernels.
Generalize a solution so that we test for each required test target file
for each test by requiring each test description to annotate their
respective test target file. If the target file does not exist, we skip
the test gracefully.
Link: http://lkml.kernel.org/r/20190320222831.8243-5-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When verify_diff_w() is used we care about the result, not the verbose
output, and although we use -q, that still gives us a chatty message
about if the files differ or not. Since verify_diff_w() uses stdinput
the chatty message says whether or not "-" matches the target file, and
this just seems rather odd. Better to just ignore that messsage all
together, what we really care about i sthe results, the return value and
we check for that.
Link: http://lkml.kernel.org/r/20190320222831.8243-4-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the test script checks for the existence of the sysctl test
module's directory path prior to loading it. We must first try to load
the module prior to checking for that path. This fixes the order for
the load / test.
Link: http://lkml.kernel.org/r/20190320222831.8243-3-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "sysctl: add pending proc_do_large_bitmap fix".
Eric sent a fix out for proc_do_large_bitmap() last month for when using
a large input buffer. After patch review a test case for the issue was
built and submitted. I noticed there were a few issues with the tests,
but instead of just asking Eric to address them I've taken care of them
and ammended the commit where necessary. There's a few issues he
reported which I also address and fix in this series.
Since we *do* expect users of these scripts to also use them on older
kernels, I've also addressed not breaking calling the script for them,
and gives us an easy way to easily extend our tests cases for future
kernels as well.
Before anyone considers these for stable as minor fixes, I'd recommend
we also address the discrepancy on the read side of things: modify the
test script to use diff against the target file instead of using the
temp file.
This patch (of 6):
We already call test_reqs(), no need to call it twice.
Link: http://lkml.kernel.org/r/20190320222831.8243-2-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently when userspace gives us a values that overflow e.g. file-max
and other callers of __do_proc_doulongvec_minmax() we simply ignore the
new value and leave the current value untouched.
This can be problematic as it gives the illusion that the limit has
indeed be bumped when in fact it failed. This commit makes sure to
return EINVAL when an overflow is detected. Please note that this is a
userspace facing change.
Link: http://lkml.kernel.org/r/20190210203943.8227-4-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Switch to bitmap_zalloc() to show clearly what we are allocating.
Besides that it returns pointer of bitmap type instead of opaque void *.
Link: http://lkml.kernel.org/r/20190304094037.57756-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In case create_workqueue fails, the fix releases resources and returns
-ENOMEM to avoid NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Acked-by: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
cpumask_parse() finds first occurrence of either or strchr() and
strlen(). We can do it better with a single call of strchrnul().
[akpm@linux-foundation.org: remove unneeded cast]
Link: http://lkml.kernel.org/r/20190409204208.12190-1-ynorov@marvell.com
Signed-off-by: Yury Norov <ynorov@marvell.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Test that trivially recursing script onto itself doesn't work.
Note: this is different test from ELOOP tests in execveat.c Those test
that execveat(2) doesn't follow symlinks when told to do so.
Link: http://lkml.kernel.org/r/20190423192720.GA21433@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
struct linux_binprm::buf is the first field and it is exactly 128 bytes
in size. It means that on x86_64 all accesses to other fields will go
though [r64 + disp32] addressing mode which is 3 bytes bloatier than
[r64 + disp8] addressing mode. Given that accesses to other fields
outnumber accesses to ->buf, move it down.
Space savings (x86_64 defconfig):
more on distro configs because LSMs actively dereference "bprm"
but do not care about first 128 bytes of the executable itself.
add/remove: 0/0 grow/shrink: 0/24 up/down: 0/-492 (-492)
Function old new delta
selinux_bprm_committing_creds 552 549 -3
finalize_exec 94 91 -3
__audit_log_bprm_fcaps 283 280 -3
__audit_bprm 39 36 -3
perf_trace_sched_process_exec 347 341 -6
install_exec_creds 105 99 -6
cap_bprm_set_creds.cold 60 54 -6
would_dump 137 128 -9
load_script 637 628 -9
bprm_change_interp 61 52 -9
trace_event_raw_event_sched_process_exec 260 250 -10
search_binary_handler 255 240 -15
remove_arg_zero 295 277 -18
free_bprm 119 101 -18
prepare_binprm 379 360 -19
setup_new_exec 336 315 -21
flush_old_exec 1638 1617 -21
copy_strings.isra 746 724 -22
setup_arg_pages 559 530 -29
load_misc_binary 1151 1118 -33
selinux_bprm_set_creds 792 753 -39
load_elf_binary 11111 11072 -39
cap_bprm_set_creds 1496 1454 -42
__do_execve_file.isra 2395 2286 -109
Link: http://lkml.kernel.org/r/20190421165025.GA26843@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
->recursion_depth is changed only by current, therefore decrementing can
be done without taking any locks.
Link: http://lkml.kernel.org/r/20190417213150.GA26474@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a plan to build the kernel with -Wimplicit-fallthrough and this
place in the code produced a warning (W=1).
This commit remove the following warning:
kernel/signal.c:795:13: warning: this statement may fall through [-Wimplicit-fallthrough=]
Link: http://lkml.kernel.org/r/20190114203505.17875-1-malat@debian.org
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fsync() needs to make sure the data & meta-data of file are persistent
after the return of fsync(), even when a power-failure occurs later. In
the case of fat-fs, the FAT belongs to the meta-data of file, so we need
to issue a flush after the writeback of FAT instead before.
Also bail out early when any stage of fsync fails.
Link: http://lkml.kernel.org/r/20190409030158.136316-1-houtao1@huawei.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
csum_partial() gives different results for little-endian and big-endian
hosts. This causes images created on little-endian hosts and mounted on
big endian hosts to see csum mismatches. This causes an endianness bug.
Sparse gives a warning as csum_partial returns a restricted integer type
__wsum_t and xattr_hash expects __u32. This warning acts as a reminder
for this bug and should not be suppressed.
This comment aims to convey these endianness issues.
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20190423161831.GA15387@bharath12345-Inspiron-5559
Signed-off-by: Bharath Vedartham <linux.bhar@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a description of the "ignore" pseudo mount option that can be used
to provide a generic indicator to applications that the mount entry
should be ignored when displaying mount information.
Link: http://lkml.kernel.org/r/155287084617.12593.812733161112154904.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Describe AUTOFS_EXP_FORCED in addition to AUTOFS_EXP_IMMEDIATE in the
description of the AUTOFS_DEV_IOCTL_EXPIRE_CMD ioctl.
Link: http://lkml.kernel.org/r/155287084078.12593.15000931045413195778.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Masahiro Yamada
Sabyasachi Gupta
Andrei Vagin
Manfred Spraul
Waiman Long
Davidlohr Bueso
Li Rongqing
Leonard Crestez
Stephen Boyd
Tom Burkart
Aaro Koskinen
Feng Tang
Greg Hackmann
Tri Vo
YueHaibing
Masatake YAMATO
Timmy Li
Eric Sandeen
Eric Sandeen
Luis Chamberlain
Christian Brauner
Andy Shevchenko
Kangjie Lu
Yury Norov
Alexey Dobriyan
Mathieu Malaterre
Hou Tao
Bharath Vedartham
Ian Kent