Граф коммитов

423 Коммитов

Автор SHA1 Сообщение Дата
Roland Dreier 59e4f541ba target: Return error to initiator if SET TARGET PORT GROUPS emulation fails
The error paths in target_emulate_set_target_port_groups() are all
essentially "rc = -EINVAL; goto out;" but the code at "out:" ignores
rc and always returns success.  This means that even if eg explicit
ALUA is turned off, the initiator will always see a good SCSI status
for SET TARGET PORT GROUPS.

Fix this by returning rc as is intended.  It appears this bug was
added by the following patch:

commit 05d1c7c0d0
Author: Andy Grover <agrover@redhat.com>
Date:   Wed Jul 20 19:13:28 2011 +0000

    target: Make all control CDBs scatter-gather

Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: Andy Grover <agrover@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-06-12 20:12:25 -07:00
Joern Engel 4149268e78 target: Add TFO->put_session() caller for HW fabric session shutdown
This patch adds an optional target_core_fabric_ops->put_session() caller
within the existing target_put_session() code path.

This is required by tcm_qla2xxx code in order to invoke it's own fabric
specific session shutdown handler using se_session->sess_kref.

Signed-off-by: Joern Engel <joern@logfs.org>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-06-12 19:33:05 -07:00
Nicholas Bellinger a4dff3043c target/file: Use O_DSYNC by default for FILEIO backends
Convert to use O_DSYNC for all cases at FILEIO backend creation time to
avoid the extra syncing of pure timestamp updates with legacy O_SYNC during
default operation as recommended by hch.  Continue to do this independently of
Write Cache Enable (WCE) bit, as WCE=0 is currently the default for all backend
devices and enabled by user on per device basis via attrib/emulate_write_cache.

This patch drops the now unnecessary fd_buffered_io= token usage that was
originally signalling when to explictly disable O_SYNC at backend creation
time for buffered I/O operation.  This can end up being dangerous for a number
of reasons during physical node failure, so go ahead and drop this option
for now when O_DSYNC is used as the default.

Also allow explict FUA WRITEs -> vfs_fsync_range() call to function in
fd_execute_cmd() independently of WCE bit setting.

Reported-by: Christoph Hellwig <hch@lst.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-06-02 23:47:20 -07:00
Stefan Richter 5f2a3d6191 sbp-target: rename a variable to avoid name clash
'int login_id' shadows 'static atomic_t login_id'.
Seen as compilation warning on x86-32.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-30 16:15:33 -07:00
Linus Torvalds 2c13bc0f8f Merge branch 'sbp-target-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull sbp-2 (firewire) target mode support from Nicholas Bellinger:
 "The FireWire SBP-2 Target is a driver for using an IEEE-1394
  connection as a SCSI transport.  This module uses the SCSI Target
  framework to expose LUNs to other machines attached to a FireWire bus,
  in effect acting as a FireWire hard disk similar to FireWire Target
  Disk mode on many Apple computers.

  Also included are the two drivers/firewire/ patches required by
  sbp-target to access fw_request fabric speed needed for mgt_agent
  TCODE_WRITE_BLOCK_REQUEST ops, and exporting fw_card kref logic used
  when creating/destroying active session references to individual
  endpoints.

  A credit goes to Chris in being able to get this code up and running
  so quickly w/o any target core changes, and special thanks goes out to
  Stefan Richter + Clemens Ladisch + Andy Grover for their help in
  getting this driver ready for mainline.  Also, one of Chris's goals
  was to be able to connect sbp-target to a PowerPC based MacOS-X based
  client, that he accomplished along the way in this obligatory
  screenshot:

    http://linux-iscsi.org/wiki/File:Linux-fireware-target-bootc-macosx.png

  Great work Chris + linux-1394 team !!"

Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

* 'sbp-target-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  sbp-target: Initial merge of firewire/ieee-1394 target mode support
  firewire: Move fw_card kref functions into linux/firewire.h
  firewire: Add function to get speed from opaque struct fw_request
2012-05-23 16:52:27 -07:00
Linus Torvalds c9bfa7d75b Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull scsi-target changes from Nicholas Bellinger:
 "There has been lots of work in existing code in a number of areas this
  past cycle.  The major highlights have been:

   * Removal of transport_do_task_sg_chain() from core + fabrics
     (Roland)
   * target-core: Removal of se_task abstraction from target-core and
     enforce hw_max_sectors for pSCSI backends (hch)
   * Re-factoring of iscsi-target tx immediate/response queues (agrover)
   * Conversion of iscsi-target back to using target core memory
     allocation logic (agrover)

  We've had one last minute iscsi-target patch go into for-next to
  address a nasty regression bug related to the target core allocation
  logic conversion from agrover that is not included in friday's
  linux-next build, but has been included in this series.

  On the new fabric module code front for-3.5, here is a brief status
  update for the three currently in flight this round:

   * usb-gadget target driver:

  Sebastian Siewior's driver for supporting usb-gadget target mode
  operation.  This will be going out as a separate PULL request from
  target-pending/usb-target-merge with subsystem maintainer ACKs.  There
  is one minor target-core patch in this series required to function.

   * sbp ieee-1394/firewire target driver:

  Chris Boot's driver for supportting the Serial Block Protocol (SBP)
  across IEEE-1394 Firewire hardware.  This will be going out as a
  separate PULL request from target-pending/sbp-target-merge with two
  additional drivers/firewire/ patches w/ subsystem maintainer ACKs.

   * qla2xxx LLD target mode infrastructure changes + tcm_qla2xxx:

  The Qlogic >= 24xx series HW target mode LLD infrastructure patch-set
  and tcm_qla2xxx fabric driver.  Support for FC target mode using
  qla2xxx LLD code has been officially submitted by Qlogic to James
  below, and is currently outstanding but not yet merged into
  scsi.git/for-next..

    [PATCH 00/22] qla2xxx: Updates for scsi "misc" branch
    http://www.spinics.net/lists/linux-scsi/msg59350.html

  Note there are *zero* direct dependencies upon this for-next series
  for the qla2xxx LLD target + tcm_qla2xxx patches submitted above, and
  over the last days the target mode team has been tracking down an
  tcm_qla2xxx specific active I/O shutdown bug that appears to now be
  almost squashed for 3.5-rc-fixes."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (47 commits)
  iscsi-target: Fix iov_count calculation bug in iscsit_allocate_iovecs
  iscsi-target: remove dead code in iscsi_check_valuelist_for_support
  target: Handle ATA_16 passthrough for pSCSI backend devices
  target: Add MI_REPORT_TARGET_PGS ext. header + implict_trans_secs attribute
  target: Fix MAINTENANCE_IN service action CDB checks to use lower 5 bits
  target: add support for the WRITE_VERIFY command
  target: make target_put_session void
  target: cleanup transport_execute_tasks()
  target: Remove max_sectors device attribute for modern se_task less code
  target: lock => unlock typo in transport_lun_wait_for_tasks
  target: Enforce hw_max_sectors for SCF_SCSI_DATA_SG_IO_CDB
  target: remove the t_se_count field in struct se_cmd
  target: remove the t_task_cdbs_ex_left field in struct se_cmd
  target: remove the t_task_cdbs_left field in struct se_cmd
  target: remove struct se_task
  target: move the state and execute lists to the command
  target: simplify command to task linkage
  target: always allocate a single task
  target: replace ->execute_task with ->execute_cmd
  target: remove the task_sectors field in struct se_task
  ...
2012-05-21 17:37:09 -07:00
Nicholas Bellinger f80e8ed395 iscsi-target: Fix iov_count calculation bug in iscsit_allocate_iovecs
This patch fixes a bug in iscsit_allocate_iovecs() where iov_count was
incorrectly calculated using min(1UL, data_length / PAGE_SIZE) instead of
max(1UL, data_length / PAGE_SIZE), that ends up triggering an OOPs for
large block I/O when the SGL <-> iovec mapping exceeds the bogus iov_count
allocation size.

This is a regression introduced during the iscsi-target conversion back
to using core memory allocation here:

commit bfb79eac20
Author: Andy Grover <agrover@redhat.com>
Date:   Tue Apr 3 15:51:29 2012 -0700

    target/iscsi: Go back to core allocating data buffer for cmd

Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-20 17:25:24 -07:00
Dan Carpenter b1e41d8cd4 iscsi-target: remove dead code in iscsi_check_valuelist_for_support
Neither "acceptor_values" nor "proposer_values" can be NULL here when
scanning the value lists for incoming iSCSI login parameters such as
HeaderDigest=CRC32C,None.

Smatch complains because we are not allowed to pass NULL pointers to
strchr().  Also I removed a second later check for "!acceptor_values"
because it gets checked on the next line in the do while condition.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-17 12:04:53 -07:00
Nicholas Bellinger cd9323fd68 target: Fix bug in handling of FILEIO + block_device resize ops
This patch fixes a bug in the handling of FILEIO w/ underlying block_device
resize operations where the original fd_dev->fd_dev_size was incorrectly being
used in fd_get_blocks() for READ_CAPACITY response payloads.

This patch avoids using fd_dev->fd_dev_size for FILEIO devices with
an underlying block_device, and instead changes fd_get_blocks() to
get the sector count directly from i_size_read() as recommended by hch.

Reported-by: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-17 12:02:43 -07:00
mengcong 8da10935bc target: Handle ATA_16 passthrough for pSCSI backend devices
The cdrecord uses ATA_PASS_THROUGH_16 command while burning CDs
with a SATA CD-ROM. This patch adds support to it so that PSCSI
CD-ROM passthrough works with the cdrecord.

(nab: Add !passthrough check to prevent non pSCSI backends from ATA_16)

Signed-off-by: Cong Meng <mc@linux.vnet.ibm.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-17 00:45:58 -07:00
Nicholas Bellinger 5b9a4d7280 target: Add MI_REPORT_TARGET_PGS ext. header + implict_trans_secs attribute
This patch adds support for ALUA MI_REPORT_TARGET_PGS extended header
format defined within SPC-4.  It changes target core ALUA emulation logic
within target_emulate_report_target_port_groups() to support both the
extended and original length only header formats.

It includes adding a new 'implict_trans_secs' attribute for each ALUA
target port group to control the value returned to the application client
for an recommended implict translation timeout in seconds.  By default
this value is currently set to zero, and limited up to 255 by virtue of
using a single byte in the extended header format.

This value is used by target_emulate_report_target_port_groups() within
the extended header logic to set IMPLICIT TRANSITION TIME as defined by
spc4r30.

Cc: Hannes Reinecke <hare@suse.de>
Cc: Rob Evers <revers@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-17 00:45:58 -07:00
Nicholas Bellinger ba539743b7 target: Fix MAINTENANCE_IN service action CDB checks to use lower 5 bits
This patch fixes the MAINTENANCE_IN service action type checks to only
look at the proper lower 5 bits of cdb byte 1.  This addresses the case
where MI_REPORT_TARGET_PGS w/ extended header using the upper three bits of
cdb byte 1 was not processed correctly in transport_generic_cmd_sequencer,
as well as the three cases for standby, unavailable, and transition ALUA
primary access state checks.

Also add MAINTENANCE_IN to the excluded list in transport_generic_prepare_cdb()
to prevent the PARAMETER DATA FORMAT bits from being cleared.

Cc: Hannes Reinecke <hare@suse.de>
Cc: Rob Evers <revers@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-17 00:45:58 -07:00
Bernhard Kohl 66246617ab target: add support for the WRITE_VERIFY command
Some legacy OS use WRITE_VERIFY on hard disks.

Signed-off-by: Bernhard Kohl <bernhard.kohl@gmx.net>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-15 12:43:21 -07:00
Bernhard Kohl edc318d9fe target: Fix SPC-2 RELEASE bug for multi-session iSCSI client setups
This patch addresses a bug in a special case for target core SPC-2 RELEASE
logic where the same physical client (eg: iSCSI InitiatorName) with
differing iSCSI session identifiers (ISID) is allowed to incorrectly release
the same client's SPC-2 reservation from the non reservation holding path.

Note this bug is specific to iscsi-target w/ SPC-2 reservations, and
with the default enforce_pr_isids=1 device attr setting in target-core
controls if a InitiatorName + different ISID reservations are handled
the same as a single iSCSI client entity.

Signed-off-by: Bernhard Kohl <bernhard.kohl@gmx.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-14 15:13:50 -07:00
Jörn Engel 33933a0e96 target: make target_put_session void
No real change, it effectively already was.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-11 15:01:52 -07:00
Jörn Engel d28d96dcf6 target: cleanup transport_execute_tasks()
The function is effectively void and doesn't need any goto logic.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-11 15:01:48 -07:00
Nicholas Bellinger cfebf8f42f target: Drop incorrect se_lun_acl release for dynamic -> explict ACL conversion
This patch removes some potentially problematic legacy code within
core_clear_initiator_node_from_tpg() that was originally intended to
release left over se_lun_acl setup during dynamic NodeACL+MappedLUN
generate when running with TPG demo-mode operation.

Since we now only ever expect to allocate and release se_lun_acl from
within target_core_fabric_configfs.c:target_fabric_make_mappedlun() and
target_fabric_drop_mappedlun() context respectively, this code for
demo-mode release is incorrect and needs to be removed.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-11 14:55:19 -07:00
Chris Boot a511ce3397 sbp-target: Initial merge of firewire/ieee-1394 target mode support
The FireWire SBP-2 Target is a driver for using an IEEE-1394 connection
as a SCSI transport. This module uses the SCSI Target framework to
expose LUNs to other machines attached to a FireWire bus, in effect
acting as a FireWire hard disk similar to FireWire Target Disk mode
on many Apple computers.

This commit contains the squashed pull from Chris Boot's SBP-2-Target:

      https://github.com/bootc/Linux-SBP-2-Target.git patch-v3

firewire-sbp-target: Add sbp_base.h header
firewire-sbp-target: Add sbp_configfs.c
firewire-sbp-target: Add sbp_fabric.{c,h}
firewire-sbp-target: Add sbp_management_agent.{c,h}
firewire-sbp-target: Add sbp_login.{c,h}
firewire-sbp-target: Add sbp_target_agent.{c,h}
firewire-sbp-target: Add sbp_scsi_cmnd.{c,h}
firewire-sbp-target: Add to target Kconfig and Makefile

Also add bootc's entry to the MAINTAINERS file.  Great work Chris !!

Signed-off-by: Chris Boot <bootc@bootc.net>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09 15:25:17 -07:00
Nicholas Bellinger 11e764bd5e target: Remove max_sectors device attribute for modern se_task less code
This patch removes the original usage of dev_attr->max_sectors in favor of
dev_attr->hw_max_sectors that is now being enforced by target core from
within transport_generic_cmd_sequencer() for SCF_SCSI_DATA_SG_IO_CDB ops.

After the recent se_task removal patches from hch, this value for IBLOCK
backends being set via configfs by userspace from an saved max_sectors
value that is turning out to be problematic, so it makes sense to go ahead
and remove this now legacy attribute all-together.

This patch also continues to make se_dev_set_default_attribs() do
(sectors / block_size) alignment for what actually get used by
target_core_mod to be safe here, following the same alignment currently
used by fabric_max_sectors.

Reported-by: Andy Grover <agrover@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09 15:08:47 -07:00
Dan Carpenter 2301917044 target: lock => unlock typo in transport_lun_wait_for_tasks
target_stop_cmd() returns with the lock held and IRQs disabled.  The
intent was to unlock here.  This bug was originally added with:

commit cf572a9627
Author: Christoph Hellwig <hch@infradead.org>
Date:   Tue Apr 24 00:25:05 2012 -0400

    target: move the state and execute lists to the command

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09 15:07:44 -07:00
Nicholas Bellinger 7b4deef5d9 target: Enforce hw_max_sectors for SCF_SCSI_DATA_SG_IO_CDB
Instead of depending upon a max_sectors value that may be set via
configfs based upon original HW queue limitations, go ahead and convert to using
the hw_max_sectors reported by the backend device in order to determine when
to reject an I/O's who's sector count exceeds what is supported by the backend
with a single se_cmd descriptor.

It addresses a potential case where se_dev_attrib.max_sectors for IBLOCK
backends has already been set via queue_max_sectors() to something small
like max_sectors=32 (LVM, DRBD may do this), resulting typically sized
SCF_SCSI_DATA_SG_IO_CDB to be incorrectly rejected with invalid_cdb_field
in transport_generic_cmd_sequencer().

Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09 15:05:16 -07:00
Christoph Hellwig d5dc28eb92 target: remove the t_se_count field in struct se_cmd
Now that tasks are gone we are guaranteed to only get a single completion
per command, and thus don't need this counter.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:11:28 -07:00
Christoph Hellwig d43d6aea84 target: remove the t_task_cdbs_ex_left field in struct se_cmd
Now that tasks are gone we are guaranteed to only get a single completion
per command, and thus don't need this counter.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:11:27 -07:00
Christoph Hellwig 226b6faf2e target: remove the t_task_cdbs_left field in struct se_cmd
Now that tasks are gone we are guaranteed to only get a single completion
per command, and thus don't need this counter.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:11:27 -07:00
Christoph Hellwig 5787cacd0b target: remove struct se_task
We can use struct se_cmd for everything it did.  Make sure to pass the S/G
list and data direction to the execution function to ease adding back BIDI
support later on.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:11:26 -07:00
Christoph Hellwig cf572a9627 target: move the state and execute lists to the command
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:11:26 -07:00
Christoph Hellwig 785fdf70b2 target: simplify command to task linkage
Now that we only have a single task per command we can use a direct pointer
to it instead of list.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:11:25 -07:00
Christoph Hellwig 4101f0a89d target: always allocate a single task
Simply transport_generic_new_cmd to only allocate a single task.  For normal
unidirection commands nothing changes except that the code is a lot simpler
now.  Any BIDI support that used to work will stop now for the next few
patches at least.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:11:25 -07:00
Christoph Hellwig 6bb35e009b target: replace ->execute_task with ->execute_cmd
Make CDB emulation work on commands instead of tasks again as a preparation
of removing tasks completely.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:11:14 -07:00
Christoph Hellwig bd31377878 target: remove the task_sectors field in struct se_task
Remove the task_sectors field that isn't used anywhere.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:03:46 -07:00
Christoph Hellwig 7a83aa4e7b target: remove the task_size field in struct se_task
Now that we don't split commands the size field in the task is always
equivalent to the one in the CDB, even in cases where we have two tasks
due to a BIDI transfer.  Just refer the the size in the command instead
of duplicating it in the task.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:03:41 -07:00
Christoph Hellwig 72a0e5e2e2 target: remove the task_lba field in struct se_task
Now that we don't split commands the lba field in the task is always
equivalent to the one in the CDB, even in cases where we have two tasks
due to a BIDI transfer.  Just refer the the lba in the command instead
of duplicating it in the task.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:02:59 -07:00
Christoph Hellwig ed3102c678 target: remove target_get_task_cdb
Now that tasks are always the same size as the command there is no need
to rewrite a CDB in common code.  Notw that we keep the separately allocated
CDB in the pscsi and stgt backends for now, to easy reintroducing any
command splitting local to these backends if nessecary.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:02:59 -07:00
Christoph Hellwig 32d8d2e430 target: remove the unused transport_limit_task_sectors helper
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:02:41 -07:00
Stefan Hajnoczi ed0b2144c5 target: Handle GET_EVENT_STATUS_NOTIFICATION passthrough
The SCSI MMC GET_EVENT_STATUS_NOTIFICATION command can be used to find
out about media change, among other things.  This patch adds it to the
command sequencer so that PSCSI CD-ROM passthrough works with modern
Linux guests that issue this command.

Tested-by: Cong Meng <mengcong@cn.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:02:33 -07:00
Dan Carpenter 381e309a65 target/iscsi: cleanup some allocation style issues
We can use kcalloc() here instead of kzalloc().  It's better style and
it has overflow checking built in.

Also -ENOMEM is the correct error code for allocation errors.  -1 means
-EPERM.  None of the callers preserve the error codes so it doesn't
matter except as a cleanup.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:02:33 -07:00
Andy Grover bfb79eac20 target/iscsi: Go back to core allocating data buffer for cmd
We originally changed iscsi to allocate its own buffers just as an
intermediate step to clean up some core buffer allocation mechanisms. Now
we can put it back.

Also had to change allocate_iovecs to use data_length instead of
t_data_nents because iovecs are now allocated before the data buffer, thus
t_data_nents is not yet initialized.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:39 -07:00
Andy Grover 11e319ed95 target: Call core_alua_check_nonop_delay in target_submit_cmd()
It appears iscsi is the only one to call this in its cmd submit path, but
it appears to be applicable to all fabrics, and should always be called.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:39 -07:00
Andy Grover 4334e49bca target/iscsi: Fold _decide_list_to_build into _build_pdu_and_seq_lists
Rename iscsit_build_pdu_and_seq_list to iscsit_do_build_pdu_and_seq_lists

Rename iscsit_do_build_list to iscsit_build_pdu_and_seq_lists

Move code from iscsit_decide_list_to_build into _seq_pdu_list.c, seems
a better fit.

Also update some comments in pdu/seq code for correctness and whitespace.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:38 -07:00
Andy Grover ebf1d95ca2 target/iscsi: Eliminate iscsi_cmd.data_length
Redundant, just use iscsi_cmd->se_cmd.data_length once se_cmd is
initialized, or hdr->data_length before then.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:38 -07:00
Andy Grover 065ca1e42f target/iscsi: Move init_se_cmd closer to lookup_cmd_lun
if we can get calls to init_se_cmd, get_sess_cmd, lookup_cmd_lun,
core_alua_check_nonop_delay, and handle_cdb_direct next to each other,
then we can just call target_submit_cmd. This is a step towards that
goal.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:37 -07:00
Andy Grover d28b11692e target/iscsi: Inline iscsit_allocate_se_cmd and *_for_tmr
Trying to move a bunch of stuff around so iscsi can use target_submit_cmd
someday, and so stuff needs to be in that function directly instead of
hidden, so it can be reordered etc.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:37 -07:00
Andy Grover b16a35b050 target: rewrite comment for generic_new_cmd
Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:36 -07:00
Andy Grover a12f41f841 target: Rename target_allocate_tasks to target_setup_cmd_from_cdb
This patch renames a horribly misnamed function that no longer allocate
tasks to something more descriptive for it's modern use in target core.

(nab: Fix up ib_srpt to use this as well ahead of a target_submit_cmd
conversion)

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:36 -07:00
Andy Grover 8b1e1244db target/iscsi: Misc cleanups from Agrover (round 2)
This patch includes the handful of squashed patches for target/iscsi from
Andy's original series into lio-core/master code:

*) Make iscsit_add_reject static
*) Remove unused data_offset_end from iscsi_datain_req
*) Remove "#if 0" stubs
*) Rename iscsi_datain_req to cmd_datain_node
*) Cleanups for built_r2ts_for_cmd()
*) Cleanups for Cleanup build_sendtargets_response()

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:35 -07:00
Andy Grover 6f3c0e69a9 target/iscsi: Refactor target_tx_thread immediate+response queue loops
Immediate queue:

Consolidate down to one switch statement by moving send_tx_data and stuff
from second switch into the first switch, or the functions the first switch
calls.

Response queue:

Do not lock istate_lock except directly around i_state modifications.

Put entire ISTATE_SEND_DATAIN path within first switch statement, in prep
for further refactoring.

All other cases set use_misc = 1 and will not be using sendpage, so just
use send_tx_data for these and set use_misc param to 1.

map_sg, sent_status, use_misc, and se_cmd vars no longer needed.

Then put immediate and response handling in separate functions in order
to get iscsi_target_tx_thread down to where it fits on a page.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:34 -07:00
Andy Grover 4580cf3848 target/iscsi: Remove unneeded locking from iscsi_target_tx_thread
When processing immediate queue, we're switching on a local variable
so it's not necessary to lock around it. However, we are modifying
cmd->i_state in two spots, so lock around those parts only.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:34 -07:00
Andy Grover c6037cc546 target/iscsi: Misc cleanups from Agrover (round 1)
*) Use decoded cmd->immediate_cmd for conditional instead of
   re-examining hdr->opcode
*) Make iscist_dataout_post_crc_passed more legible
*) use max() to reduce code in build_r2ts_for_cmd()
*) Remove CONFIG_SMP and if 0 ifdefs
*) Replace if/goto with a while loop
*) Remove unused conn->tx_immediate_queue and tx_response_queue

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:33 -07:00
Andy Grover 2fbb471e78 target/iscsi: Rename iscsi_cmd.i_list to iscsi_cmd.i_conn_node
The name change makes it clear this list_head is so the cmd can be an
item in the connection's conn_cmd_list.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:33 -07:00
Roland Dreier 957525a242 target: Remove transport_do_task_sg_chain() and associated detritus
Now that all fabrics are converted over to using se_cmd->t_data_sg
directly, we can drop the task sg chaining support.  With the modern
memory allocation in target core, task sg chaining is needless
overhead -- we would split up the main cmd sglist into pieces, and
then splice those pieces back together instead of just using the
original list directly.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:32 -07:00