If the application uses io_uring and also relies heavily on signals
for communication, that can cause io-wq workers to spuriously exit
just because the parent has a signal pending. Just ignore signals
unless they are fatal.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We've got a few issues that all boil down to the fact that we have one
list of pending work items, yet two different types of workers to
serve them. This causes some oddities around workers switching type and
even hashed work vs regular work on the same bounded list.
Just separate them out cleanly, similarly to how we already do
accounting of what is running. That provides a clean separation and
removes some corner cases that can cause stalls when handling IO
that is punted to io-wq.
Fixes: ecc53c48c1 ("io-wq: check max_worker limits if a worker transitions bound state")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need to set the stalled bit early, before we drop the lock for adding
us to the stall hash queue. If not, then we can race with new work being
queued between adding us to the stall hash and io_worker_handle_work()
marking us stalled.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous commit removed the IRQ safety of the worker and wqe locks,
but that left one spot of the hash wait lock now being done without
already having IRQs disabled.
Ensure that we use the right locking variant for the hashed waitqueue
lock.
Fixes: a9a4aa9fbf ("io-wq: wqe and worker locks no longer need to be IRQ safe")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In case of buffered reading from block device, when short read happens,
we should retry to read more, otherwise the IO will be completed
partially, for example, the following fio expects to read 2MB, but it
can only read 1M or less bytes:
fio --name=onessd --filename=/dev/nvme0n1 --filesize=2M \
--rw=randread --bs=2M --direct=0 --overwrite=0 --numjobs=1 \
--iodepth=1 --time_based=0 --runtime=2 --ioengine=io_uring \
--registerfiles --fixedbufs --gtod_reduce=1 --group_reporting
Fix the issue by allowing short read retry for block device, which sets
FMODE_BUF_RASYNC really.
Fixes: 9a173346bd ("io_uring: fix short read retries for non-reg files")
Cc: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20210821150751.1290434-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
During some testing, it became evident that using IORING_OP_WRITE doesn't
hash buffered writes like the other writes commands do. That's simply
an oversight, and can cause performance regressions when doing buffered
writes with this command.
Correct that and add the flag, so that buffered writes are correctly
hashed when using the non-iovec based write command.
Cc: stable@vger.kernel.org
Fixes: 3a6820f2bb ("io_uring: add non-vectored read/write commands")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The attempt to find and activate a free worker for new work is currently
combined with creating a new one if we don't find one, but that opens
io-wq up to a race where the worker that is found and activated can
put itself to sleep without knowing that it has been selected to perform
this new work.
Fix this by moving the activation into where we add the new work item,
then we can retain it within the wqe->lock scope and elimiate the race
with the worker itself checking inside the lock, but sleeping outside of
it.
Cc: stable@vger.kernel.org
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When new work is added, io_wqe_enqueue() checks if we need to wake or
create a new worker. But that check is done outside the lock that
otherwise synchronizes us with a worker going to sleep, so we can end
up in the following situation:
CPU0 CPU1
lock
insert work
unlock
atomic_read(nr_running) != 0
lock
atomic_dec(nr_running)
no wakeup needed
Hold the wqe lock around the "need to wakeup" check. Then we can also get
rid of the temporary work_flags variable, as we know the work will remain
valid as long as we hold the lock.
Cc: stable@vger.kernel.org
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring no longer queues async work off completion handlers that run in
hard or soft interrupt context, and that use case was the only reason that
io-wq had to use IRQ safe locks for wqe and worker locks.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For the two places where new workers are created, we diligently check if
we are allowed to create a new worker. If we're currently at the limit
of how many workers of a given type we can have, then we don't create
any new ones.
If you have a mixed workload with various types of bound and unbounded
work, then it can happen that a worker finishes one type of work and
is then transitioned to the other type. For this case, we don't check
if we are actually allowed to do so. This can cause io-wq to temporarily
exceed the allowed number of workers for a given type.
When retrieving work, check that the types match. If they don't, check
if we are allowed to transition to the other type. If not, then don't
handle the new work.
Cc: stable@vger.kernel.org
Reported-by: Johannes Lundberg <johalun0@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We allow updating normal timeouts, add support for adjusting timings of
linked timeouts as well.
Reported-by: Victor Stewart <v@nametag.social>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A preparation patch. Keep all queued linked timeout in a list, so they
may be found and updated.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Certain use cases want to use CLOCK_BOOTTIME or CLOCK_REALTIME rather than
CLOCK_MONOTONIC, instead of the default CLOCK_MONOTONIC.
Add an IORING_TIMEOUT_BOOTTIME and IORING_TIMEOUT_REALTIME flag that
allows timeouts and linked timeouts to use the selected clock source.
Only one clock source may be selected, and we -EINVAL the request if more
than one is given. If neither BOOTIME nor REALTIME are selected, the
previous default of MONOTONIC is used.
Link: https://github.com/axboe/liburing/issues/369
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io-wq divides work into two categories:
1) Work that completes in a bounded time, like reading from a regular file
or a block device. This type of work is limited based on the size of
the SQ ring.
2) Work that may never complete, we call this unbounded work. The amount
of workers here is just limited by RLIMIT_NPROC.
For various uses cases, it's handy to have the kernel limit the maximum
amount of pending workers for both categories. Provide a way to do with
with a new IORING_REGISTER_IOWQ_MAX_WORKERS operation.
IORING_REGISTER_IOWQ_MAX_WORKERS takes an array of two integers and sets
the max worker count to what is being passed in for each category. The
old values are returned into that same array. If 0 is being passed in for
either category, it simply returns the current value.
The value is capped at RLIMIT_NPROC. This actually isn't that important
as it's more of a hint, if we're exceeding the value then our attempt
to fork a new worker will fail. This happens naturally already if more
than one node is in the system, as these values are per-node internally
for io-wq.
Reported-by: Johannes Lundberg <johalun0@gmail.com>
Link: https://github.com/axboe/liburing/issues/420
Signed-off-by: Jens Axboe <axboe@kernel.dk>
req->buf_index is u16 and so we rely on registered buffers indexes
fitting into it. Add a build check, so when the upper limit for the
number of buffers is lifted we get a compliation fail but not lurking
problems.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/787e8e1a17cea51ca6301426b1c4c4887b8bd676.1629920396.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Given a linkchain like this:
req0(link_flag)-->req1(link_flag)-->...-->reqn(no link_flag)
There is a problem:
- if some intermediate linked req like req1 's submittion fails, reqs
after it won't be cancelled.
- sqpoll disabled: maybe it's ok since users can get the error info
of req1 and stop submitting the following sqes.
- sqpoll enabled: definitely a problem, the following sqes will be
submitted in the next round.
The solution is to refactor the code logic to:
- if a linked req's submittion fails, just mark it and the head(if it
exists) as REQ_F_FAIL. Leverage req->result to indicate whether it
is failed or cancelled.
- submit or fail the whole chain when we come to the end of it.
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20210827094609.36052-3-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's not necessary to free the request back to slab when we fail to
get sqe, just move it to state->free_list.
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20210825175856.194299-1-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As done with open opcodes, allow accept to skip installing fd into
processes' file tables and put it directly into io_uring's fixed file
table. Same restrictions and design as for open.
Suggested-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/6d16163f376fac7ac26a656de6b42199143e9721.1629888991.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of opening a file into a process's file table as usual and then
registering the fd within io_uring, some users may want to skip the
first step and place it directly into io_uring's fixed file table.
This patch adds such a capability for IORING_OP_OPENAT and
IORING_OP_OPENAT2.
The behaviour is controlled by setting sqe->file_index, where 0 implies
the old behaviour using normal file tables. If non-zero value is
specified, then it will behave as described and place the file into a
fixed file slot sqe->file_index - 1. A file table should be already
created, the slot should be valid and empty, otherwise the operation
will fail.
Keep the error codes consistent with IORING_OP_FILES_UPDATE, ENXIO and
EINVAL on inappropriate fixed tables, and return EBADF on collision with
already registered file.
Note: IOSQE_FIXED_FILE can't be used to switch between modes, because
accept takes a file, and it already uses the flag with a different
meaning.
Suggested-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/e9b33d1163286f51ea707f87d95bd596dada1e65.1629888991.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce and reuse a helper that acts similarly to __sys_accept4_file()
but returns struct file instead of installing file descriptor. Will be
used by io_uring.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Acked-by: David S. Miller <davem@davemloft.net>
Link: https://lore.kernel.org/r/c57b9e8e818d93683a3d24f8ca50ca038d1da8c4.1629888991.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
WARNING: CPU: 1 PID: 5870 at fs/io_uring.c:5975 io_try_cancel_userdata+0x30f/0x540 fs/io_uring.c:5975
CPU: 0 PID: 5870 Comm: iou-wrk-5860 Not tainted 5.14.0-rc6-next-20210820-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:io_try_cancel_userdata+0x30f/0x540 fs/io_uring.c:5975
Call Trace:
io_async_cancel fs/io_uring.c:6014 [inline]
io_issue_sqe+0x22d5/0x65a0 fs/io_uring.c:6407
io_wq_submit_work+0x1dc/0x300 fs/io_uring.c:6511
io_worker_handle_work+0xa45/0x1840 fs/io-wq.c:533
io_wqe_worker+0x2cc/0xbb0 fs/io-wq.c:582
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
io_try_cancel_userdata() can be called from io_async_cancel() executing
in the io-wq context, so the warning fires, which is there to alert
anyone accessing task->io_uring->io_wq in a racy way. However,
io_wq_put_and_exit() always first waits for all threads to complete,
so the only detail left is to zero tctx->io_wq after the context is
removed.
note: one little assumption is that when IO_WQ_WORK_CANCEL, the executor
won't touch ->io_wq, because io_wq_destroy() might cancel left pending
requests in such a way.
Cc: stable@vger.kernel.org
Reported-by: syzbot+b0c9d1588ae92866515f@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/dfdd37a80cfa9ffd3e59538929c99cdd55d8699e.1629721757.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Employ inline completion logic for read/write completions done via
io_req_task_complete(). If ->uring_lock is contended, just do normal
request completion, but if not, make tctx_task_work() to grab the lock
and do batched inline completions in io_req_task_complete().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/94589c3ce69eaed86a21bb1ec696407a54fab1aa.1629286357.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Many task_work handlers either grab ->uring_lock, or may benefit from
having it. Move locking logic out of individual handlers to a lazy
approach controlled by tctx_task_work(), so we don't keep doing
tons of mutex lock/unlock.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d6a34e147f2507a2f3e2fa1e38a9c541dcad3929.1629286357.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We've previously had an issue where overflow flush unconditionally calls
io_cqring_ev_posted() even if it didn't flush any events to the ring,
causing wake and eventfd increment where no new events are available.
Some applications don't like that, see commit b18032bb0a for details.
This came up in discussion for another patch recently, hence add a
comment detailing what the relationship between calling the events
posted helper and CQ ring entries is.
Link: https://lore.kernel.org/io-uring/77a44fce-c831-16a6-8e80-9aee77f496a2@kernel.dk/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
coml_nr in ctx_flush_and_put() is not protected by uring_lock, this
may cause problems when accessing in parallel:
say coml_nr > 0
ctx_flush_and put other context
if (compl_nr) get mutex
coml_nr > 0
do flush
coml_nr = 0
release mutex
get mutex
do flush (*)
release mutex
in (*) place, we call io_cqring_ev_posted() and users likely get
no events there. To avoid spurious events, re-check the value when
under the lock.
Fixes: 2c32395d81 ("io_uring: fix __tctx_task_work() ctx race")
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210820221954.61815-1-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now allocated rsrc table uses PAGE_SIZE as the size of 2nd-level, and
accessing this table relies on each level index from fixed TABLE_SHIFT
(12 - 3) in 4k page case. In order to correctly work in non-4k page,
define TABLE_SHIFT as non-fixed (PAGE_SHIFT - shift of data) for
2nd-level table entry number.
Signed-off-by: wangyangbo <wangyangbo@uniontech.com>
Link: https://lore.kernel.org/r/20210819055657.27327-1-wangyangbo@uniontech.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now with IRQ completions done via IRQ, almost all requests freeing
are done from the context of submitter task, so it makes sense to
extend task_put optimisation from io_req_free_batch_finish() to cover
all the cases including task_work by moving it into io_put_task().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/824a7cbd745ddeee4a0f3ff85c558a24fd005872.1629302453.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have two checks of task->flags & PF_EXITING left:
1) In io_req_task_submit(), which is called in task_work and hence always
in the context of the original task. That means that
req->task == current, and hence checking ->flags is totally fine.
2) In io_poll_rewait(), where we need to stop re-arming poll to prevent
it interfering with cancelation. This is only run from task_work as
well, and hence for this case too req->task == current.
Add a comment to both spots detailing that.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't need to protect nr_running and worker_refs by wqe->lock, so
narrow the range of raw_spin_lock_irq - raw_spin_unlock_irq
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210810125554.99229-1-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move earlier the check for whether __io_queue_proc() tries to poll
already polled waitqueue, and do the same for the second poll entry, if
any. Shouldn't really matter, but at least it would have a more
predictable behaviour.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8cb428cfe8ade0fd055859fabb878db8777d4c2f.1629228203.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have io_req_complete_post() to post a CQE and put the request. It
takes care of all synchronisation and is more concise and efficent, so
replace all hancoded occurrences of
"lock; post CQE; unlock; + put_req()" with io_req_complete_post().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2c83463458a613f9d870e5147eb134da2aa70779.1629228203.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linked timeout handling during issuing is heavy, it adds extra
instructions and forces to save the next linked timeout before
io_issue_sqe().
Follwing the same reasoning as in refcounting patches, a request can't
be freed by the time it returns from io_issue_sqe(), so now we don't
need to do io_prep_linked_timeout() in advance, and it can be delayed to
colder paths optimising the generic path.
Also, it should also save quite a lot for requests with linked timeouts
and completed inline on timeout spinlocking + hrtimer_start() +
hrtimer_try_to_cancel() and so on.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/19bfc9a0d26c5c5f1e359f7650afe807ca8ef879.1628981736.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe
Pavel Begunkov
Ming Lei
Hao Xu
wangyangbo