Add a HID_QUIRK_NO_INIT_REPORTS quirk for the Dell K12A keyboard-dock,
which can be used with various Dell Venue 11 models.
Without this quirk the keyboard/touchpad combo works fine when connected
at boot, but when hotplugged 9 out of 10 times it will not work properly.
Adding the quirk fixes this.
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
On the Dell XPS 9570, the Synaptics SYNA2393 touchpad generates spurious
interrupts after resuming from suspend until it receives some input or
is reset. Add it to the quirk I2C_HID_QUIRK_RESET_ON_RESUME so that it
is reset when resuming from suspend.
More information about the bug can be found in this mailing list
discussion: https://www.spinics.net/lists/linux-input/msg59530.html
Signed-off-by: Daniel Playfair Cal <daniel.playfair.cal@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The state of the center button was not reported to userspace for the
2nd-gen Intuos Pro S when used over Bluetooth due to the pad handling
code not being updated to support its reduced number of buttons. This
patch uses the actual number of buttons present on the tablet to
assemble a button state bitmap.
Link: https://github.com/linuxwacom/xf86-input-wacom/issues/112
Fixes: cd47de45b855 ("HID: wacom: Add 2nd gen Intuos Pro Small support")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The syzbot fuzzer discovered a bad race between in the usbhid driver
between usbhid_stop() and usbhid_close(). In particular,
usbhid_stop() does:
usb_free_urb(usbhid->urbin);
...
usbhid->urbin = NULL; /* don't mess up next start */
and usbhid_close() does:
usb_kill_urb(usbhid->urbin);
with no mutual exclusion. If the two routines happen to run
concurrently so that usb_kill_urb() is called in between the
usb_free_urb() and the NULL assignment, it will access the
deallocated urb structure -- a use-after-free bug.
This patch adds a mutex to the usbhid private structure and uses it to
enforce mutual exclusion of the usbhid_start(), usbhid_stop(),
usbhid_open() and usbhid_close() callbacks.
Reported-and-tested-by: syzbot+7bf5a7b0f0a1f9446f4c@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This reverts commit 15893fa401.
The referenced commit broke pen and touch input for a variety of devices
such as the Cintiq Pro 32. Affected devices may appear to work normally
for a short amount of time, but eventually loose track of actual touch
state and can leave touch arbitration enabled which prevents the pen
from working. The commit is not itself required for any currently-available
Bluetooth device, and so we revert it to correct the behavior of broken
devices.
This breakage occurs due to a mismatch between the order of collections
and the order of usages on some devices. This commit tries to read the
contact count before processing events, but will fail if the contact
count does not occur prior to the first logical finger collection. This
is the case for devices like the Cintiq Pro 32 which place the contact
count at the very end of the report.
Without the contact count set, touches will only be partially processed.
The `wacom_wac_finger_slot` function will not open any slots since the
number of contacts seen is greater than the expectation of 0, but we will
still end up calling `input_mt_sync_frame` for each finger anyway. This
can cause problems for userspace separate from the issue currently taking
place in the kernel. Only once all of the individual finger collections
have been processed do we finally get to the enclosing collection which
contains the contact count. The value ends up being used for the *next*
report, however.
This delayed use of the contact count can cause the driver to loose track
of the actual touch state and believe that there are contacts down when
there aren't. This leaves touch arbitration enabled and prevents the pen
from working. It can also cause userspace to incorrectly treat single-
finger input as gestures.
Link: https://github.com/linuxwacom/input-wacom/issues/146
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Fixes: 15893fa401 ("HID: wacom: generic: read the number of expected touches on a per collection basis")
Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID_DEVICE_ID_ALPS_1657 PID is too specific, as there are many other
ALPS hardware IDs using this particular touchpad.
Rename the identifier to HID_DEVICE_ID_ALPS_U1_UNICORN_LEGACY in order
to describe reality better.
Fixes: 640e403b1f ("HID: alps: Add AUI1657 device ID")
Reported-by: Xiaojian Cao <xiaojian.cao@cn.alps.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This device is used on Lenovo V130-15IKB variants and uses
the same registers as U1.
Signed-off-by: Artem Borisov <dedsa2002@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Logitech G11 keyboard is a cheap variant of the G15 without the LCD
screen. It uses the same layout for its extra and macro keys (G1 - G18,
M1-M3, MR) and - from the input subsystem's perspective - behaves just
like the G15, so we can treat it as such.
Tested it with my own keyboard.
Signed-off-by: Fabian Schindlatz <fabian.schindlatz@fau.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We've recently switched from extracting the value of HID_DG_CONTACTMAX
at a fixed offset (which may not be correct for all tablets) to
injecting the report into the driver for the generic codepath to handle.
Unfortunately, this change was made for *all* tablets, even those which
aren't generic. Because `wacom_wac_report` ignores reports from non-
generic devices, the contact count never gets initialized. Ultimately
this results in the touch device itself failing to probe, and thus the
loss of touch input.
This commit adds back the fixed-offset extraction for non-generic devices.
Link: https://github.com/linuxwacom/input-wacom/issues/155
Fixes: 184eccd403 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
CC: stable@vger.kernel.org # 5.3+
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Pull HID updates from Jiri Kosina:
- Logitech HID++ protocol support improvement from Filipe Laíns
- probe fix for Logitech-G* devices from Hans de Goede
- a few other small code cleanups and support for new device IDs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: rmi: Simplify an error handling path in 'rmi_hid_read_block()'
HID: intel-ish-hid: hbm.h: Replace zero-length array with flexible-array member
HID: intel-ish-hid: ishtp-dev.h: Replace zero-length array with flexible-array member
HID: Add driver fixing Glorious PC Gaming Race mouse report descriptor
HID: lg-g15: Do not fail the probe when we fail to disable F# emulation
HID: appleir: Use devm_kzalloc() instead of kzalloc()
HID: appleir: Remove unnecessary goto label
HID: logitech-dj: add support for the static device in the Powerplay mat/receiver
HID: mcp2221: add usb to i2c-smbus host bridge
HID: logitech-dj: add debug msg when exporting a HID++ report descriptors
HID: quirks: Remove ITE 8595 entry from hid_have_special_driver
Pull trivial tree updates from Jiri Kosina:
"My attempt to revitalize trivial queue I've been neglecting for years
(what a disaster that was for this world, right? :) ) with patches
collected from backlog that were still relevant and not applied
elsewhere in the meantime"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
err.h: remove deprecated PTR_RET for good
blk-mq: Fix typo in comment
x86/boot: Fix comment spelling
sh: mach-highlander: Fix comment spelling
s390/dasd: Fix comment spelling
mfd: wm8994: Fix comment spelling
docs: Add reference in binfmt-misc.rst
genirq: fix kerneldoc comment for irq_desc
drm/amdgpu: fix two documentation mismatch issues
HID: fix Kconfig word ordering
list/hashtable: minor documentation corrections.
The 'RMI_READ_REQUEST_PENDING' bit is already cleared in the error handling
path. There is no need to reset it twice.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Glorious Model O mice (and also at least the Model O-, which is
driver-wise the same mouse) have a bug in the descriptor of HID
Report with ID 2. This report is used for Consumer Control buttons,
which can be mapped using the provided Windows only software.
Here is an excerpt from the original descriptor:
INPUT(2)[INPUT]
Field(0)
Flags( Constant Variable Absolute )
Field(1)
Flags( Constant Variable Absolute )
Field(2)
Flags( Constant Variable Absolute )
The issue is the Constant flag specified on all 3 fields, which
causes the hid driver to ignore changes in these fields and
essentialy causes the buttons to not work at all. The submitted driver
patches the descriptor to end up with the following:
INPUT(2)[INPUT]
Field(0)
Flags( Variable Relative )
Field(1)
Flags( Variable Relative )
Field(2)
Flags( Variable Relative )
The Constant bit is reset and the Relative bit has been set in
order to prevent repeat events when holding down the button.
Additionally, the device name is changed from the hardware-reported
"SINOWEALTH Wired Gaming Mouse" to "Glorious Model O" or "Glorious
Model D".
Signed-off-by: Samuel Čavoj <sammko@sammserver.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
By default the G1-G12 keys on the Logitech gaming keyboards send
F1 - F12 when in "generic HID" mode.
The first thing the hid-lg-g15 driver does is disable this behavior.
We have received a bugreport that this does not work when the keyboard
is connected through an Aten KVM switch. Using a gaming keyboard with
a KVM is a bit weird setup, but still we can try to fail a bit more
gracefully here.
On the G510 keyboards the same USB-interface which is used for the gaming
keys is also used for the media-keys. Before this commit we would call
hid_hw_stop() on failure to disable the F# emulation and then exit the
probe method with an error code.
This not only causes us to not handle the gaming-keys, but this also
breaks the media keys which is a regression compared to the situation
when these keyboards where handled by the generic hidinput driver.
This commit changes the error handling to clear the hiddev drvdata
(to disable our .raw_event handler) and then returning from the probe
method with success.
The net result of this is that, when connected through a KVM, things
work as well as they did before the hid-lg-g15 driver was introduced.
Fixes: ad4203f5a2 ("HID: lg-g15: Add support for the G510 keyboards' gaming keys")
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1806321
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix a silly word ordering typo.
Fixes: 42337b9d4d ("HID: add driver for U2F Zero built-in LED and RNG")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fixes from Jiri Kosina:
- string buffer formatting fixes in picolcd and sensor drivers, from
Takashi Iwai
- two new device IDs from Chen-Tsung Hsieh and Tony Fischetti
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: add ALWAYS_POLL quirk to lenovo pixart mouse
HID: google: add moonball USB id
HID: hid-sensor-custom: Use scnprintf() for avoiding potential buffer overflow
HID: hid-picolcd_fb: Use scnprintf() for avoiding potential buffer overflow
A lenovo pixart mouse (17ef:608d) is afflicted common the the malfunction
where it disconnects and reconnects every minute--each time incrementing
the device number. This patch adds the device id of the device and
specifies that it needs the HID_QUIRK_ALWAYS_POLL quirk in order to
work properly.
Signed-off-by: Tony Fischetti <tony.fischetti@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Logitech G Powerplay has a lightspeed receiver with a static HID++
device with ID 7 attached to it to. It is used to configure the led on
the mat. For this reason I increased the max number of devices.
Signed-off-by: Filipe Laíns <lains@archlinux.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
MCP2221 is a USB HID to I2C/SMbus host bridge device. This
commit implements i2c and smbus host adapter support. 7-bit
address and i2c multi-message transaction is also supported.
Signed-off-by: Rishi Gupta <gupt21@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix below warnings reported by coccicheck:
drivers/hid/hid-hyperv.c:197:2-7: WARNING: NULL check before some freeing functions is not needed.
drivers/hid/hid-hyperv.c:211:2-7: WARNING: NULL check before some freeing functions is not needed.
Signed-off-by: Lucas Tanure <tanure@linux.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Pull HID subsystem fixes from Jiri Kosina:
- syzkaller-reported error handling fixes in various drivers, from
various people
- increase of HID report buffer size to 8K, which is apparently needed
by certain modern devices
- a few new device-ID-specific fixes / quirks
- battery charging status reporting fix in logitech-hidpp, from Filipe
Laíns
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: hid-bigbenff: fix race condition for scheduled work during removal
HID: hid-bigbenff: call hid_hw_stop() in case of error
HID: hid-bigbenff: fix general protection fault caused by double kfree
HID: i2c-hid: add Trekstor Surfbook E11B to descriptor override
HID: alps: Fix an error handling path in 'alps_input_configured()'
HID: hiddev: Fix race in in hiddev_disconnect()
HID: core: increase HID report buffer size to 8KiB
HID: core: fix off-by-one memset in hid_report_raw_event()
HID: apple: Add support for recent firmware on Magic Keyboards
HID: ite: Only bind to keyboard USB interface on Acer SW5-012 keyboard dock
HID: logitech-hidpp: BatteryVoltage: only read chargeStatus if extPower is active
It's possible that there is scheduled work left while the device is
already being removed, which can cause a kernel crash. Adding a flag
will avoid this.
Signed-off-by: Hanno Zulla <kontakt@hanno.de>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
It's required to call hid_hw_stop() once hid_hw_start() was called
previously, so error cases need to handle this. Also, hid_hw_close() is
not necessary during removal.
Signed-off-by: Hanno Zulla <kontakt@hanno.de>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The struct *bigben was allocated via devm_kzalloc() and then used as a
parameter in input_ff_create_memless(). This caused a double kfree
during removal of the device, since both the managed resource API and
ml_ff_destroy() in drivers/input/ff-memless.c would call kfree() on it.
Signed-off-by: Hanno Zulla <kontakt@hanno.de>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The Surfbook E11B uses the SIPODEV SP1064 touchpad, which does not supply
descriptors, so it has to be added to the override list.
BugLink: https://bugs.launchpad.net/bugs/1858299
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
They are issues:
- if 'input_allocate_device()' fails and return NULL, there is no need
to free anything and 'input_free_device()' call is a no-op. It can
be axed.
- 'ret' is known to be 0 at this point, so we must set it to a
meaningful value before returning
Fixes: 2562756dde ("HID: add Alps I2C HID Touchpad-Stick support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Syzbot reports that "hiddev" is used after it's free in hiddev_disconnect().
The hiddev_disconnect() function sets "hiddev->exist = 0;" so
hiddev_release() can free it as soon as we drop the "existancelock"
lock. This patch moves the mutex_unlock(&hiddev->existancelock) until
after we have finished using it.
Reported-by: syzbot+784ccb935f9900cc7c9e@syzkaller.appspotmail.com
Fixes: 7f77897ef2 ("HID: hiddev: fix potential use-after-free")
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When exporting all other types of report descriptors we print a debug
message. Not doing so for HID++ descriptors makes unaware users think
that no HID++ descriptor was exported.
Signed-off-by: Filipe Laíns <lains@archlinux.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The ITE 8595 chip used in various 2-in-1 keyboard docks works fine with
the hid-generic driver (minus the RF_KILL key) and also keeps working fine
when swapping drivers, so there is no need to have it in the
hid_have_special_driver list.
Note the other 2 USB ids in hid-ite.c were never added to
hid_have_special_driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In case a report is greater than HID_MAX_BUFFER_SIZE, it is truncated,
but the report-number byte is not correctly handled. This results in a
off-by-one in the following memset, causing a kernel Oops and ensuing
system crash.
Note: With commit 8ec321e96e ("HID: Fix slab-out-of-bounds read in
hid_field_extract") I no longer hit the kernel Oops as we instead fail
"controlled" at probe if there is a report too long in the HID
report-descriptor. hid_report_raw_event() is an exported symbol, so
presumabely we cannot always rely on this being the case.
Fixes: 966922f26c ("HID: fix a crash in hid_report_raw_event()
function.")
Signed-off-by: Johan Korsnes <jkorsnes@cisco.com>
Cc: Armando Visconti <armando.visconti@st.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Magic Keyboards with more recent firmware (0x0100) report Fn key differently.
Without this patch, Fn key may not behave as expected and may not be
configurable via hid_apple fnmode module parameter.
Signed-off-by: Mansour Behabadi <mansour@oxplot.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit 8f18eca9eb ("HID: ite: Add USB id match for Acer SW5-012 keyboard
dock") added the USB id for the Acer SW5-012's keyboard dock to the
hid-ite driver to fix the rfkill driver not working.
Most keyboard docks with an ITE 8595 keyboard/touchpad controller have the
"Wireless Radio Control" bits which need the special hid-ite driver on the
second USB interface (the mouse interface) and their touchpad only supports
mouse emulation, so using generic hid-input handling for anything but
the "Wireless Radio Control" bits is fine. On these devices we simply bind
to all USB interfaces.
But unlike other ITE8595 using keyboard docks, the Acer Aspire Switch 10
(SW5-012)'s touchpad not only does mouse emulation it also supports
HID-multitouch and all the keys including the "Wireless Radio Control"
bits have been moved to the first USB interface (the keyboard intf).
So we need hid-ite to handle the first (keyboard) USB interface and have
it NOT bind to the second (mouse) USB interface so that that can be
handled by hid-multitouch.c and we get proper multi-touch support.
This commit changes the hid_device_id for the SW5-012 keyboard dock to
only match on hid devices from the HID_GROUP_GENERIC group, this way
hid-ite will not bind the the mouse/multi-touch interface which has
HID_GROUP_MULTITOUCH_WIN_8 as group.
This fixes the regression to mouse-emulation mode introduced by adding
the keyboard dock USB id.
Cc: stable@vger.kernel.org
Fixes: 8f18eca9eb ("HID: ite: Add USB id match for Acer SW5-012 keyboard dock")
Reported-by: Zdeněk Rampas <zdenda.rampas@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
uapi:
- dma-buf heaps added (and fixed)
- command line add support for panel oreientation
- command line allow overriding penguin count
drm:
- mipi dsi definition updates
- lockdep annotations for dma_resv
- remove dma-buf kmap/kunmap support
- constify fb_ops in all fbdev drivers
- MST fix for daisy chained hotplug-
- CTA-861-G modes with VIC >= 193 added
- fix drm_panel_of_backlight export
- LVDS decoder support
- more device based logging support
- scanline alighment for dumb buffers
- MST DSC helpers
scheduler:
- documentation fixes
- job distribution improvements
panel:
- Logic PD type 28 panel support
- Jimax8729d MIPI-DSI
- igenic JZ4770
- generic DSI devicetree bindings
- sony acx424AKP panel
- Leadtek LTK500HD1829
- xinpeng XPP055C272
- AUO B116XAK01
- GiantPlus GPM940B0
- BOE NV140FHM-N49
- Satoz SAT050AT40H12R2
- Sharp LS020B1DD01D panels.
ttm:
- use blocking WW lock
i915:
- hw/uapi state separation
- Lock annotation improvements
- selftest improvements
- ICL/TGL DSI VDSC support
- VBT parsing improvments
- Display refactoring
- DSI updates + fixes
- HDCP 2.2 for CFL
- CML PCI ID fixes
- GLK+ fbc fix
- PSR fixes
- GEN/GT refactor improvments
- DP MST fixes
- switch context id alloc to xarray
- workaround updates
- LMEM debugfs support
- tiled monitor fixes
- ICL+ clock gating programming removed
- DP MST disable sequence fixed
- LMEM discontiguous object maps
- prefaulting for discontiguous objects
- use LMEM for dumb buffers if possible
- add LMEM mmap support
amdgpu:
- enable sync object timelines for vulkan
- MST atomic routines
- enable MST DSC support
- add DMCUB display microengine support
- DC OEM i2c support
- Renoir DC fixes
- Initial HDCP 2.x support
- BACO support for Arcturus
- Use BACO for runtime PM power save
- gfxoff on navi10
- gfx10 golden updates and fixes
- DCN support on POWER
- GFXOFF for raven1 refresh
- MM engine idle handlers cleanup
- 10bpc EDP panel fixes
- renoir watermark fixes
- SR-IOV fixes
- Arcturus VCN fixes
- GDDR6 training fixes
- freesync fixes
- Pollock support
amdkfd:
- unify more codepath with amdgpu
- use KIQ to setup HIQ rather than MMIO
radeon:
- fix vma fault handler race
- PPC DMA fix
- register check fixes for r100/r200
nouveau:
- mmap_sem vs dma_resv fix
- rewrite the ACR secure boot code for Turing
- TU10x graphics engine support (TU11x pending)
- Page kind mapping for turing
- 10-bit LUT support
- GP10B Tegra fixes
- HD audio regression fix
hisilicon/hibmc:
- use generic fbdev code and helpers
rockchip:
- dsi/px30 support
virtio:
- fb damage support
- static some functions
vc4:
- use dma_resv lock wrappers
msm:
- use dma_resv lock wrappers
- sc7180 display + DSI support
- a618 support
- UBWC support improvements
vmwgfx:
- updates + new logging uapi
exynos:
- enable/disable callback cleanups
etnaviv:
- use dma_resv lock wrappers
atmel-hlcdc:
- clock fixes
mediatek:
- cmdq support
- non-smooth cursor fixes
- ctm property support
sun4i:
- suspend support
- A64 mipi dsi support
rcar-du:
- Color management module support
- LVDS encoder dual-link support
- R8A77980 support
analogic:
- add support for an6345
ast:
- atomic modeset support
- primary plane garbage fix
arcgpu:
- fixes for fourcc handling
tegra:
- minor fixes and improvments
mcde:
- vblank support
meson:
- OSD1 plane AFBC commit
gma500:
- add pageflip support
- reomve global drm_dev
komeda:
- tweak debugfs output
- d32 support
- runtime PM suppotr
udl:
- use generic shmem helpers
- cleanup and fixes
-----BEGIN PGP SIGNATURE-----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=oFrI
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Davbe Airlie:
"This is the main pull request for graphics for 5.6. Usual selection of
changes all over.
I've got one outstanding vmwgfx pull that touches mm so kept it
separate until after all of this lands. I'll try and get it to you
soon after this, but it might be early next week (nothing wrong with
code, just my schedule is messy)
This also hits a lot of fbdev drivers with some cleanups.
Other notables:
- vulkan timeline semaphore support added to syncobjs
- nouveau turing secureboot/graphics support
- Displayport MST display stream compression support
Detailed summary:
uapi:
- dma-buf heaps added (and fixed)
- command line add support for panel oreientation
- command line allow overriding penguin count
drm:
- mipi dsi definition updates
- lockdep annotations for dma_resv
- remove dma-buf kmap/kunmap support
- constify fb_ops in all fbdev drivers
- MST fix for daisy chained hotplug-
- CTA-861-G modes with VIC >= 193 added
- fix drm_panel_of_backlight export
- LVDS decoder support
- more device based logging support
- scanline alighment for dumb buffers
- MST DSC helpers
scheduler:
- documentation fixes
- job distribution improvements
panel:
- Logic PD type 28 panel support
- Jimax8729d MIPI-DSI
- igenic JZ4770
- generic DSI devicetree bindings
- sony acx424AKP panel
- Leadtek LTK500HD1829
- xinpeng XPP055C272
- AUO B116XAK01
- GiantPlus GPM940B0
- BOE NV140FHM-N49
- Satoz SAT050AT40H12R2
- Sharp LS020B1DD01D panels.
ttm:
- use blocking WW lock
i915:
- hw/uapi state separation
- Lock annotation improvements
- selftest improvements
- ICL/TGL DSI VDSC support
- VBT parsing improvments
- Display refactoring
- DSI updates + fixes
- HDCP 2.2 for CFL
- CML PCI ID fixes
- GLK+ fbc fix
- PSR fixes
- GEN/GT refactor improvments
- DP MST fixes
- switch context id alloc to xarray
- workaround updates
- LMEM debugfs support
- tiled monitor fixes
- ICL+ clock gating programming removed
- DP MST disable sequence fixed
- LMEM discontiguous object maps
- prefaulting for discontiguous objects
- use LMEM for dumb buffers if possible
- add LMEM mmap support
amdgpu:
- enable sync object timelines for vulkan
- MST atomic routines
- enable MST DSC support
- add DMCUB display microengine support
- DC OEM i2c support
- Renoir DC fixes
- Initial HDCP 2.x support
- BACO support for Arcturus
- Use BACO for runtime PM power save
- gfxoff on navi10
- gfx10 golden updates and fixes
- DCN support on POWER
- GFXOFF for raven1 refresh
- MM engine idle handlers cleanup
- 10bpc EDP panel fixes
- renoir watermark fixes
- SR-IOV fixes
- Arcturus VCN fixes
- GDDR6 training fixes
- freesync fixes
- Pollock support
amdkfd:
- unify more codepath with amdgpu
- use KIQ to setup HIQ rather than MMIO
radeon:
- fix vma fault handler race
- PPC DMA fix
- register check fixes for r100/r200
nouveau:
- mmap_sem vs dma_resv fix
- rewrite the ACR secure boot code for Turing
- TU10x graphics engine support (TU11x pending)
- Page kind mapping for turing
- 10-bit LUT support
- GP10B Tegra fixes
- HD audio regression fix
hisilicon/hibmc:
- use generic fbdev code and helpers
rockchip:
- dsi/px30 support
virtio:
- fb damage support
- static some functions
vc4:
- use dma_resv lock wrappers
msm:
- use dma_resv lock wrappers
- sc7180 display + DSI support
- a618 support
- UBWC support improvements
vmwgfx:
- updates + new logging uapi
exynos:
- enable/disable callback cleanups
etnaviv:
- use dma_resv lock wrappers
atmel-hlcdc:
- clock fixes
mediatek:
- cmdq support
- non-smooth cursor fixes
- ctm property support
sun4i:
- suspend support
- A64 mipi dsi support
rcar-du:
- Color management module support
- LVDS encoder dual-link support
- R8A77980 support
analogic:
- add support for an6345
ast:
- atomic modeset support
- primary plane garbage fix
arcgpu:
- fixes for fourcc handling
tegra:
- minor fixes and improvments
mcde:
- vblank support
meson:
- OSD1 plane AFBC commit
gma500:
- add pageflip support
- reomve global drm_dev
komeda:
- tweak debugfs output
- d32 support
- runtime PM suppotr
udl:
- use generic shmem helpers
- cleanup and fixes"
* tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits)
drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing
drm/nouveau/acr: return error when registering LSF if ACR not supported
drm/nouveau/disp/gv100-: not all channel types support reporting error codes
drm/nouveau/disp/nv50-: prevent oops when no channel method map provided
drm/nouveau: support synchronous pushbuf submission
drm/nouveau: signal pending fences when channel has been killed
drm/nouveau: reject attempts to submit to dead channels
drm/nouveau: zero vma pointer even if we only unreference it rather than free
drm/nouveau: Add HD-audio component notifier support
drm/nouveau: fix build error without CONFIG_IOMMU_API
drm/nouveau/kms/nv04: remove set but not used variable 'width'
drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector'
drm/nouveau/mmu: fix comptag memory leak
drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc
drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping
drm/exynos: Rename Exynos to lowercase
drm/exynos: change callback names
drm/mst: Don't do atomic checks over disabled managers
drm/amdgpu: add the lost mutex_init back
drm/amd/display: skip opp blank or unblank if test pattern enabled
...
In the HID++ 2.0 function getBatteryInfo() from the BatteryVoltage
(0x1001) feature, chargeStatus is only valid if extPower is active.
Previously we were ignoring extPower, which resulted in wrong values.
Example:
With an unplugged mouse
$ cat /sys/class/power_supply/hidpp_battery_0/status
Charging
This patch fixes that, it also renames charge_sts to flags as
charge_sts can be confused with chargeStatus from the spec.
Spec:
+--------+-------------------------------------------------------------------------+
| byte | 2 |
+--------+--------------+------------+------------+----------+----------+----------+
| bit | 0..2 | 3 | 4 | 5 | 6 | 7 |
+--------+--------------+------------+------------+----------+----------+----------+
| buffer | chargeStatus | fastCharge | slowCharge | critical | (unused) | extPower |
+--------+--------------+------------+------------+----------+----------+----------+
Table 1 - battery voltage (0x1001), getBatteryInfo() (ASE 0), 3rd byte
+-------+--------------------------------------+
| value | meaning |
+-------+--------------------------------------+
| 0 | Charging |
+-------+--------------------------------------+
| 1 | End of charge (100% charged) |
+-------+--------------------------------------+
| 2 | Charge stopped (any "normal" reason) |
+-------+--------------------------------------+
| 7 | Hardware error |
+-------+--------------------------------------+
Table 2 - chargeStatus value
Signed-off-by: Filipe Laíns <lains@archlinux.org>
Tested-by: Pedro Vanzella <pedro@pedrovanzella.com>
Reviewed-by: Pedro Vanzella <pedro@pedrovanzella.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Hans de Goede
Arnd Bergmann
Daniel Playfair Cal
Jason Gerecke
Alan Stern
Jiri Kosina
Artem Borisov
Fabian Schindlatz
Sebastian Reichel
Jason Gerecke
Linus Torvalds
Christophe JAILLET
Gustavo A. R. Silva
Samuel Čavoj
Geert Uytterhoeven
Tony Fischetti
Chen-Tsung Hsieh
Lucas Tanure
Takashi Iwai
Filipe Laíns
Rishi Gupta
Hanno Zulla
Kai-Heng Feng
dan.carpenter@oracle.com
Johan Korsnes
Mansour Behabadi