Граф коммитов

37 Коммитов

Автор SHA1 Сообщение Дата
Tejun Heo 11a3122f6c block: strip out locking optimization in put_io_context()
put_io_context() performed a complex trylock dancing to avoid
deferring ioc release to workqueue.  It was also broken on UP because
trylock was always assumed to succeed which resulted in unbalanced
preemption count.

While there are ways to fix the UP breakage, even the most
pathological microbench (forced ioc allocation and tight fork/exit
loop) fails to show any appreciable performance benefit of the
optimization.  Strip it out.  If there turns out to be workloads which
are affected by this change, simpler optimization from the discussion
thread can be applied later.

Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <1328514611.21268.66.camel@sli10-conroe>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-07 07:51:30 +01:00
Tejun Heo b2efa05265 block, cfq: unlink cfq_io_context's immediately
cic is association between io_context and request_queue.  A cic is
linked from both ioc and q and should be destroyed when either one
goes away.  As ioc and q both have their own locks, locking becomes a
bit complex - both orders work for removal from one but not from the
other.

Currently, cfq tries to circumvent this locking order issue with RCU.
ioc->lock nests inside queue_lock but the radix tree and cic's are
also protected by RCU allowing either side to walk their lists without
grabbing lock.

This rather unconventional use of RCU quickly devolves into extremely
fragile convolution.  e.g. The following is from cfqd going away too
soon after ioc and q exits raced.

 general protection fault: 0000 [#1] PREEMPT SMP
 CPU 2
 Modules linked in:
 [   88.503444]
 Pid: 599, comm: hexdump Not tainted 3.1.0-rc10-work+ #158 Bochs Bochs
 RIP: 0010:[<ffffffff81397628>]  [<ffffffff81397628>] cfq_exit_single_io_context+0x58/0xf0
 ...
 Call Trace:
  [<ffffffff81395a4a>] call_for_each_cic+0x5a/0x90
  [<ffffffff81395ab5>] cfq_exit_io_context+0x15/0x20
  [<ffffffff81389130>] exit_io_context+0x100/0x140
  [<ffffffff81098a29>] do_exit+0x579/0x850
  [<ffffffff81098d5b>] do_group_exit+0x5b/0xd0
  [<ffffffff81098de7>] sys_exit_group+0x17/0x20
  [<ffffffff81b02f2b>] system_call_fastpath+0x16/0x1b

The only real hot path here is cic lookup during request
initialization and avoiding extra locking requires very confined use
of RCU.  This patch makes cic removal from both ioc and request_queue
perform double-locking and unlink immediately.

* From q side, the change is almost trivial as ioc->lock nests inside
  queue_lock.  It just needs to grab each ioc->lock as it walks
  cic_list and unlink it.

* From ioc side, it's a bit more difficult because of inversed lock
  order.  ioc needs its lock to walk its cic_list but can't grab the
  matching queue_lock and needs to perform unlock-relock dancing.

  Unlinking is now wholly done from put_io_context() and fast path is
  optimized by using the queue_lock the caller already holds, which is
  by far the most common case.  If the ioc accessed multiple devices,
  it tries with trylock.  In unlikely cases of fast path failure, it
  falls back to full double-locking dance from workqueue.

Double-locking isn't the prettiest thing in the world but it's *far*
simpler and more understandable than RCU trick without adding any
meaningful overhead.

This still leaves a lot of now unnecessary RCU logics.  Future patches
will trim them.

-v2: Vivek pointed out that cic->q was being dereferenced after
     cic->release() was called.  Updated to use local variable @this_q
     instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:39 +01:00
Tejun Heo dc86900e0a block, cfq: move ioc ioprio/cgroup changed handling to cic
ioprio/cgroup change was handled by marking the changed state in ioc
and, on the following access to the ioc, performing RCU-protected
iteration through all cic's grabbing the matching queue_lock.

This patch moves the changed state to each cic.  When ioprio or cgroup
changes, the respective bit is set on all cic's of the ioc and when
each of those cic (not ioc) is accessed, change is applied for that
specific ioc-queue pair.

This also fixes the following two race conditions between setting and
clearing of changed states.

* Missing barrier between assign/load of ioprio and ioprio_changed
  allowed applying old ioprio.

* Change requests could happen between application of change and
  clearing of changed variables.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:38 +01:00
Tejun Heo 6e736be7f2 block: make ioc get/put interface more conventional and fix race on alloction
Ignoring copy_io() during fork, io_context can be allocated from two
places - current_io_context() and set_task_ioprio().  The former is
always called from local task while the latter can be called from
different task.  The synchornization between them are peculiar and
dubious.

* current_io_context() doesn't grab task_lock() and assumes that if it
  saw %NULL ->io_context, it would stay that way until allocation and
  assignment is complete.  It has smp_wmb() between alloc/init and
  assignment.

* set_task_ioprio() grabs task_lock() for assignment and does
  smp_read_barrier_depends() between "ioc = task->io_context" and "if
  (ioc)".  Unfortunately, this doesn't achieve anything - the latter
  is not a dependent load of the former.  ie, if ioc itself were being
  dereferenced "ioc->xxx", it would mean something (not sure what tho)
  but as the code currently stands, the dependent read barrier is
  noop.

As only one of the the two test-assignment sequences is task_lock()
protected, the task_lock() can't do much about race between the two.
Nothing prevents current_io_context() and set_task_ioprio() allocating
its own ioc for the same task and overwriting the other's.

Also, set_task_ioprio() can race with exiting task and create a new
ioc after exit_io_context() is finished.

ioc get/put doesn't have any reason to be complex.  The only hot path
is accessing the existing ioc of %current, which is simple to achieve
given that ->io_context is never destroyed as long as the task is
alive.  All other paths can happily go through task_lock() like all
other task sub structures without impacting anything.

This patch updates ioc get/put so that it becomes more conventional.

* alloc_io_context() is replaced with get_task_io_context().  This is
  the only interface which can acquire access to ioc of another task.
  On return, the caller has an explicit reference to the object which
  should be put using put_io_context() afterwards.

* The functionality of current_io_context() remains the same but when
  creating a new ioc, it shares the code path with
  get_task_io_context() and always goes through task_lock().

* get_io_context() now means incrementing ref on an ioc which the
  caller already has access to (be that an explicit refcnt or implicit
  %current one).

* PF_EXITING inhibits creation of new io_context and once
  exit_io_context() is finished, it's guaranteed that both ioc
  acquisition functions return %NULL.

* All users are updated.  Most are trivial but
  smp_read_barrier_depends() removal from cfq_get_io_context() needs a
  bit of explanation.  I suppose the original intention was to ensure
  ioc->ioprio is visible when set_task_ioprio() allocates new
  io_context and installs it; however, this wouldn't have worked
  because set_task_ioprio() doesn't have wmb between init and install.
  There are other problems with this which will be fixed in another
  patch.

* While at it, use NUMA_NO_NODE instead of -1 for wildcard node
  specification.

-v2: Vivek spotted contamination from debug patch.  Removed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:38 +01:00
Paul Gortmaker afeacc8c1f fs: add export.h to files using EXPORT_SYMBOL/THIS_MODULE macros
These files were getting <linux/module.h> via an implicit include
path, but we want to crush those out of existence since they cost
time during compiles of processing thousands of lines of headers
for no reason.  Give them the lightweight header that just contains
the EXPORT_SYMBOL infrastructure.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:30:31 -04:00
Greg Thelen d69b78ba1d ioprio: grab rcu_read_lock in sys_ioprio_{set,get}()
Using:
- CONFIG_LOCKUP_DETECTOR=y
- CONFIG_PREEMPT=y
- CONFIG_LOCKDEP=y
- CONFIG_PROVE_LOCKING=y
- CONFIG_PROVE_RCU=y
found a missing rcu lock during boot on a 512 MiB x86_64 ubuntu vm:
  ===================================================
  [ INFO: suspicious rcu_dereference_check() usage. ]
  ---------------------------------------------------
  kernel/pid.c:419 invoked rcu_dereference_check() without protection!

  other info that might help us debug this:

  rcu_scheduler_active = 1, debug_locks = 0
  1 lock held by ureadahead/1355:
   #0:  (tasklist_lock){.+.+..}, at: [<ffffffff8115bc09>] sys_ioprio_set+0x7f/0x29e

  stack backtrace:
  Pid: 1355, comm: ureadahead Not tainted 2.6.37-dbg-DEV #1
  Call Trace:
   [<ffffffff8109c10c>] lockdep_rcu_dereference+0xaa/0xb3
   [<ffffffff81088cbf>] find_task_by_pid_ns+0x44/0x5d
   [<ffffffff81088cfa>] find_task_by_vpid+0x22/0x24
   [<ffffffff8115bc3e>] sys_ioprio_set+0xb4/0x29e
   [<ffffffff8147cf21>] ? trace_hardirqs_off_thunk+0x3a/0x3c
   [<ffffffff8105c409>] sysenter_dispatch+0x7/0x2c
   [<ffffffff8147cee2>] ? trace_hardirqs_on_thunk+0x3a/0x3f

The fix is to:
a) grab rcu lock in sys_ioprio_{set,get}() and
b) avoid grabbing tasklist_lock.
Discussion in: http://marc.info/?l=linux-kernel&m=128951324702889

Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>

Modified by Jens to remove the now redundant inner rcu lock and
unlock since they are now protected by the outer lock.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-15 10:23:31 +01:00
Sergey Senozhatsky f85acd81aa ioprio: rcu_read_lock/unlock protect find_task_by_vpid call (V2)
Commit 4221a9918e "Add RCU check for
find_task_by_vpid()" introduced rcu_lockdep_assert to find_task_by_pid_ns=

Assertion failed in sys_ioprio_get. The patch is fixing assertion
failure in ioprio_set as well.

 kernel/pid.c:419 invoked rcu_dereference_check() without protection!

 stack backtrace:
 Pid: 4254, comm: iotop Not tainted
 Call Trace:
 [<ffffffff810656f2>] lockdep_rcu_dereference+0xaa/0xb2
 [<ffffffff81053c67>] find_task_by_pid_ns+0x4f/0x68
 [<ffffffff81053c9d>] find_task_by_vpid+0x1d/0x1f
 [<ffffffff811104e2>] sys_ioprio_get+0x50/0x2da
 [<ffffffff81002182>] system_call_fastpath+0x16/0x1b

V2: rcu critical section expanded according to comment by Paul E. McKenney

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-10 14:40:53 +01:00
Daniel J Blueman 1447399b3e ioprio: fix RCU locking around task dereference
With 2.6.37-rc1, I observe sys_ioprio_set not taking the RCU lock [1]
across access to the task credentials.

Inspecting the code in fs/ioprio.c, the tasklist_lock is held for read
across the __task_cred call, which is presumably sufficient to prevent
the task credentials becoming stale.

===================================================

[ INFO: suspicious rcu_dereference_check() usage. ]

---------------------------------------------------

kernel/pid.c:419 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 1

1 lock held by start-stop-daem/2246:

 #0:  (tasklist_lock){.?.?..}, at: [<ffffffff811a2dfa>]
sys_ioprio_set+0x8a/0x400

stack backtrace:

Pid: 2246, comm: start-stop-daem Not tainted 2.6.37-rc1-330cd+ #2

Call Trace:

 [<ffffffff8109f5f4>] lockdep_rcu_dereference+0xa4/0xc0

 [<ffffffff81085651>] find_task_by_pid_ns+0x81/0x90

 [<ffffffff8108567d>] find_task_by_vpid+0x1d/0x20

 [<ffffffff811a3160>] sys_ioprio_set+0x3f0/0x400

 [<ffffffff816efa79>] ? trace_hardirqs_on_thunk+0x3a/0x3f

 [<ffffffff81003482>] system_call_fastpath+0x16/0x1b

Take the RCU lock for read across acquiring the pointer to the task
credentials and dereferencing it.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>

Fixed up by Jens to fix missing rcu_read_unlock() on mismatches.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-10 14:40:53 +01:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Heiko Carstens 938bb9f5e8 [CVE-2009-0029] System call wrappers part 28
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:30 +01:00
Theodore Ts'o b3881f74b3 ext4: Add mount option to set kjournald's I/O priority
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jens Axboe <jens.axboe@oracle.com>
2009-01-05 22:46:26 -05:00
David Howells c69e8d9c01 CRED: Use RCU to access another task's creds and to release a task's own creds
Use RCU to access another task's creds and to release a task's own creds.
This means that it will be possible for the credentials of a task to be
replaced without another task (a) requiring a full lock to read them, and (b)
seeing deallocated memory.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:19 +11:00
David Howells 86a264abe5 CRED: Wrap current->cred and a few other accessors
Wrap current->cred and a few other accessors to hide their actual
implementation.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:18 +11:00
David Howells b6dff3ec5e CRED: Separate task security context from task_struct
Separate the task security context from task_struct.  At this point, the
security data is temporarily embedded in the task_struct with two pointers
pointing to it.

Note that the Alpha arch is altered as it refers to (E)UID and (E)GID in
entry.S via asm-offsets.

With comment fixes Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:16 +11:00
David Howells da9592edeb CRED: Wrap task credential accesses in the filesystem subsystem
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.

Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().

Change some task->e?[ug]id to task_e?[ug]id().  In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:05 +11:00
Ken Chen 2d70b68d42 fix setpriority(PRIO_PGRP) thread iterator breakage
When user calls sys_setpriority(PRIO_PGRP ...) on a NPTL style multi-LWP
process, only the task leader of the process is affected, all other
sibling LWP threads didn't receive the setting.  The problem was that the
iterator used in sys_setpriority() only iteartes over one task for each
process, ignoring all other sibling thread.

Introduce a new macro do_each_pid_thread / while_each_pid_thread to walk
each thread of a process.  Convert 4 call sites in {set/get}priority and
ioprio_{set/get}.

Signed-off-by: Ken Chen <kenchen@google.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-20 15:40:32 -07:00
Jens Axboe 0871714e08 cfq-iosched: relax IOPRIO_CLASS_IDLE restrictions
Currently you must be root to set idle io prio class on a process. This
is due to the fact that the idle class is implemented as a true idle
class, meaning that it will not make progress if someone else is
requesting disk access. Unfortunately this means that it opens DOS
opportunities by locking down file system resources, hence it is root
only at the moment.

This patch relaxes the idle class a little, by removing the truly idle
part (which entals a grace period with associated timer). The
modifications make the idle class as close to zero impact as can be done
while still guarenteeing progress. This means we can relax the root only
criteria as well.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 11:38:15 +01:00
Jens Axboe d38ecf935f io context sharing: preliminary support
Detach task state from ioc, instead keep track of how many processes
are accessing the ioc.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:50:31 +01:00
Jens Axboe fd0928df98 ioprio: move io priority from task_struct to io_context
This is where it belongs and then it doesn't take up space for a
process that doesn't do IO.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:50:29 +01:00
Jens Axboe 8ec680e4c3 ioprio: allow sys_ioprio_set() value of 0 to reset ioprio setting
Normally io priorities follow the CPU nice, unless a specific scheduling
class has been set. Once that is set, there's no way to reset the
behaviour to 'none' so that it follows CPU nice again.

Currently passing in 0 as the ioprio class/value will return -1/EINVAL,
change that to allow resetting of a set scheduling class.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-07 13:54:07 +01:00
Pavel Emelyanov 228ebcbe63 Uninline find_task_by_xxx set of functions
The find_task_by_something is a set of macros are used to find task by pid
depending on what kind of pid is proposed - global or virtual one.  All of
them are wrappers above the most generic one - find_task_by_pid_type_ns() -
and just substitute some args for it.

It turned out, that dereferencing the current->nsproxy->pid_ns construction
and pushing one more argument on the stack inline cause kernel text size to
grow.

This patch moves all this stuff out-of-line into kernel/pid.c.  Together
with the next patch it saves a bit less than 400 bytes from the .text
section.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Paul Menage <menage@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:40 -07:00
Pavel Emelyanov b488893a39 pid namespaces: changes to show virtual ids to user
This is the largest patch in the set. Make all (I hope) the places where
the pid is shown to or get from user operate on the virtual pids.

The idea is:
 - all in-kernel data structures must store either struct pid itself
   or the pid's global nr, obtained with pid_nr() call;
 - when seeking the task from kernel code with the stored id one
   should use find_task_by_pid() call that works with global pids;
 - when showing pid's numerical value to the user the virtual one
   should be used, but however when one shows task's pid outside this
   task's namespace the global one is to be used;
 - when getting the pid from userspace one need to consider this as
   the virtual one and use appropriate task/pid-searching functions.

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: nuther build fix]
[akpm@linux-foundation.org: yet nuther build fix]
[akpm@linux-foundation.org: remove unneeded casts]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Paul Menage <menage@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:40 -07:00
Eric W. Biederman 41487c65bf [PATCH] pid: replace do/while_each_task_pid with do/while_each_pid_task
There isn't any real advantage to this change except that it allows the old
functions to be removed.  Which is easier on maintenance and puts the code in
a more uniform style.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:32 -08:00
Vasily Tarasov d58cdfb89c [PATCH] block layer: ioprio_best function fix
Currently ioprio_best function first checks wethere aioprio or bioprio equals
IOPRIO_CLASS_NONE (ioprio_valid() macros does that) and if it is so it returns
bioprio/aioprio appropriately. Thus the next four lines, that set aclass/bclass
to IOPRIO_CLASS_BE, if aclass/bclass == IOPRIO_CLASS_NONE, are never executed.

The second problem: if aioprio from class IOPRIO_CLASS_NONE and bioprio from
class IOPRIO_CLASS_IDLE are passed to ioprio_best function, it will return
IOPRIO_CLASS_IDLE. It means that during __make_request we can merge two
requests and set the priority of merged request to IDLE, while one of
the initial requests originates from a process with NONE (default) priority.
So we can get a situation when a process with default ioprio will experience
IO starvation, while there is no process from real-time class in the system.

Just removing ioprio_valid check should correct situation.

Signed-off-by: Vasily Tarasov <vtaras@openvz.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-10-12 15:09:51 +02:00
Jens Axboe 0fe2347957 [PATCH] Update axboe@suse.de email address
As people often look for the copyright in files to see who to mail,
update the link to a neutral one.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:52:34 +02:00
Oleg Nesterov cf342e52e3 [PATCH] Don't need to disable interrupts for tasklist_lock
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:31:18 +02:00
Jens Axboe fc46379daf [PATCH] cfq-iosched: kill cfq_exit_lock
cfq_exit_lock is protecting two things now:

- The per-ioc rbtree of cfq_io_contexts

- The per-cfqd linked list of cfq_io_contexts

The per-cfqd linked list can be protected by the queue lock, as it is (by
definition) per cfqd as the queue lock is.

The per-ioc rbtree is mainly used and updated by the process itself only.
The only outside use is the io priority changing. If we move the
priority changing to not browsing the rbtree, we can remove any locking
from the rbtree updates and lookup completely. Let the sys_ioprio syscall
just mark processes as having the iopriority changed and lazily update
the private cfq io contexts the next time io is queued, and we can
remove this locking as well.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:29:36 +02:00
Oleg Nesterov e014ff8d42 [PATCH] uninline ioprio_best()
Saves 376 bytes (5 callers) for me.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-08-21 10:02:50 +02:00
Oleg Nesterov 9f83e45eb5 [PATCH] Fix current_io_context() vs set_task_ioprio() race
I know nothing about io scheduler, but I suspect set_task_ioprio() is not safe.

current_io_context() initializes "struct io_context", then sets ->io_context.
set_task_ioprio() running on another cpu may see the changes out of order, so
->set_ioprio(ioc) may use io_context which was not initialized properly.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-08-21 08:34:15 +02:00
Oleg Nesterov 78bd4d484f [PATCH] sys_ioprio_set: minor do_each_thread+break fix
From include/linux/sched.h:

         * Careful: do_each_thread/while_each_thread is a double loop so
         *          'break' will not work as expected - use goto instead.
         */

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-08-21 08:33:23 +02:00
David Quigley a1836a42da [PATCH] SELinux: Add security hook definition for getioprio and insert hooks
Add a new security hook definition for the sys_ioprio_get operation.  At
present, the SELinux hook function implementation for this hook is
identical to the getscheduler implementation but a separate hook is
introduced to allow this check to be specialized in the future if
necessary.

This patch also creates a helper function get_task_ioprio which handles the
access check in addition to retrieving the ioprio value for the task.

Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 11:25:37 -07:00
James Morris 03e6806063 [PATCH] lsm: add task_setioprio hook
Implement an LSM hook for setting a task's IO priority, similar to the hook
for setting a tasks's nice value.

A previous version of this LSM hook was included in an older version of
multiadm by Jan Engelhardt, although I don't recall it being submitted
upstream.

Also included is the corresponding SELinux hook, which re-uses the setsched
permission in the proccess class.

Signed-off-by: James Morris <jmorris@namei.org>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:53 -07:00
Randy Dunlap 16f7e0fe2e [PATCH] capable/capability.h (fs/)
fs: Use <linux/capability.h> where capable() is used.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 18:42:13 -08:00
Adrian Bunk 9abdc4cd8a fs/ioprio.c should #include <linux/syscalls.h>
Every file should include the headers containing the prototypes for
it's global functions.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
2005-11-08 16:57:02 +01:00
Linus Torvalds f6fdd7d9c2 Don't allow normal users to set idle IO priority
It has all the normal priority inversion problems.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-20 18:51:29 -07:00
Anton Blanchard cf36680887 [PATCH] move ioprio syscalls into syscalls.h
- Make ioprio syscalls return long, like set/getpriority syscalls.
- Move function prototypes into syscalls.h so we can pick them up in the
  32/64bit compat code.

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:37 -07:00
Jens Axboe 22e2c507c3 [PATCH] Update cfq io scheduler to time sliced design
This updates the CFQ io scheduler to the new time sliced design (cfq
v3).  It provides full process fairness, while giving excellent
aggregate system throughput even for many competing processes.  It
supports io priorities, either inherited from the cpu nice value or set
directly with the ioprio_get/set syscalls.  The latter closely mimic
set/getpriority.

This import is based on my latest from -mm.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 14:33:29 -07:00