Граф коммитов

27 Коммитов

Автор SHA1 Сообщение Дата
Masahiro Yamada a55f283e8b kbuild: generate include/generated/compile.h in top Makefile
Now that UTS_VERSION was separated out, this header can be generated
much earlier, and probably the top Makefile is a better place to do it
than init/Makefile.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-29 04:40:15 +09:00
Masahiro Yamada 2df8220cc5 kbuild: build init/built-in.a just once
Kbuild builds init/built-in.a twice; first during the ordinary
directory descending, second from scripts/link-vmlinux.sh.

We do this because UTS_VERSION contains the build version and the
timestamp. We cannot update it during the normal directory traversal
since we do not yet know if we need to update vmlinux. UTS_VERSION is
temporarily calculated, but omitted from the update check. Otherwise,
vmlinux would be rebuilt every time.

When Kbuild results in running link-vmlinux.sh, it increments the
version number in the .version file and takes the timestamp at that
time to really fix UTS_VERSION.

However, updating the same file twice is a footgun. To avoid nasty
timestamp issues, all build artifacts that depend on init/built-in.a
are atomically generated in link-vmlinux.sh, where some of them do not
need rebuilding.

To fix this issue, this commit changes as follows:

[1] Split UTS_VERSION out to include/generated/utsversion.h from
    include/generated/compile.h

    include/generated/utsversion.h is generated just before the
    vmlinux link. It is generated under include/generated/ because
    some decompressors (s390, x86) use UTS_VERSION.

[2] Split init_uts_ns and linux_banner out to init/version-timestamp.c
    from init/version.c

    init_uts_ns and linux_banner contain UTS_VERSION. During the ordinary
    directory descending, they are compiled with __weak and used to
    determine if vmlinux needs relinking. Just before the vmlinux link,
    they are compiled without __weak to embed the real version and
    timestamp.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-29 04:40:15 +09:00
Frederic Weisbecker a0a7e453b5 sched/preempt: Tell about PREEMPT_DYNAMIC on kernel headers
Displaying "PREEMPT" on kernel headers when CONFIG_PREEMPT_DYNAMIC=y
can be misleading for anybody involved in remote debugging because it
is then not guaranteed that there is an actual preemption behaviour. It
depends on default Kconfig or boot defined choices.

Therefore, tell about PREEMPT_DYNAMIC on static kernel headers and leave
the search for the actual preemption behaviour to browsing dmesg.

Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220217111240.GA742892@lothringen
2022-03-11 15:36:35 +01:00
Masahiro Yamada 129ab0d2d9 kbuild: do not quote string values in include/config/auto.conf
The previous commit fixed up all shell scripts to not include
include/config/auto.conf.

Now that include/config/auto.conf is only included by Makefiles,
we can change it into a more Make-friendly form.

Previously, Kconfig output string values enclosed with double-quotes
(both in the .config and include/config/auto.conf):

    CONFIG_X="foo bar"

Unlike shell, Make handles double-quotes (and single-quotes as well)
verbatim. We must rip them off when used.

There are some patterns:

  [1] $(patsubst "%",%,$(CONFIG_X))
  [2] $(CONFIG_X:"%"=%)
  [3] $(subst ",,$(CONFIG_X))
  [4] $(shell echo $(CONFIG_X))

These are not only ugly, but also fragile.

[1] and [2] do not work if the value contains spaces, like
   CONFIG_X=" foo bar "

[3] does not work correctly if the value contains double-quotes like
   CONFIG_X="foo\"bar"

[4] seems to work better, but has a cost of forking a process.

Anyway, quoted strings were always PITA for our Makefiles.

This commit changes Kconfig to stop quoting in include/config/auto.conf.

These are the string type symbols referenced in Makefiles or scripts:

    ACPI_CUSTOM_DSDT_FILE
    ARC_BUILTIN_DTB_NAME
    ARC_TUNE_MCPU
    BUILTIN_DTB_SOURCE
    CC_IMPLICIT_FALLTHROUGH
    CC_VERSION_TEXT
    CFG80211_EXTRA_REGDB_KEYDIR
    EXTRA_FIRMWARE
    EXTRA_FIRMWARE_DIR
    EXTRA_TARGETS
    H8300_BUILTIN_DTB
    INITRAMFS_SOURCE
    LOCALVERSION
    MODULE_SIG_HASH
    MODULE_SIG_KEY
    NDS32_BUILTIN_DTB
    NIOS2_DTB_SOURCE
    OPENRISC_BUILTIN_DTB
    SOC_CANAAN_K210_DTB_SOURCE
    SYSTEM_BLACKLIST_HASH_LIST
    SYSTEM_REVOCATION_KEYS
    SYSTEM_TRUSTED_KEYS
    TARGET_CPU
    UNUSED_KSYMS_WHITELIST
    XILINX_MICROBLAZE0_FAMILY
    XILINX_MICROBLAZE0_HW_VER
    XTENSA_VARIANT_NAME

I checked them one by one, and fixed up the code where necessary.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-01-08 18:03:57 +09:00
Valentin Schneider a8b76910e4 preempt: Restore preemption model selection configs
Commit c597bfddc9 ("sched: Provide Kconfig support for default dynamic
preempt mode") changed the selectable config names for the preemption
model. This means a config file must now select

  CONFIG_PREEMPT_BEHAVIOUR=y

rather than

  CONFIG_PREEMPT=y

to get a preemptible kernel. This means all arch config files would need to
be updated - right now they'll all end up with the default
CONFIG_PREEMPT_NONE_BEHAVIOUR.

Rather than touch a good hundred of config files, restore usage of
CONFIG_PREEMPT{_NONE, _VOLUNTARY}. Make them configure:
o The build-time preemption model when !PREEMPT_DYNAMIC
o The default boot-time preemption model when PREEMPT_DYNAMIC

Add siblings of those configs with the _BUILD suffix to unconditionally
designate the build-time preemption model (PREEMPT_DYNAMIC is built with
the "highest" preemption model it supports, aka PREEMPT). Downstream
configs should by now all be depending / selected by CONFIG_PREEMPTION
rather than CONFIG_PREEMPT, so only a few sites need patching up.

Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20211110202448.4054153-2-valentin.schneider@arm.com
2021-11-11 13:09:33 +01:00
Masahiro Yamada 41eba23efb init: use $(call cmd,) for generating include/generated/compile.h
The 'cmd' macro shows the short log only when $(quiet) is quiet_.
Do not do it manually.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-05-27 04:01:50 +09:00
Christoph Hellwig 4f5b246b37 md: move the early init autodetect code to drivers/md/
Just like the NFS and CIFS root code this better lives with the
driver it is tightly integrated with.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-16 15:34:47 +02:00
Masahiro Yamada 9a95015466 kbuild: use CONFIG_CC_VERSION_TEXT to construct LINUX_COMPILER macro
scripts/mkcompile_h runs $(CC) just for getting the version string.
Reuse CONFIG_CC_VERSION_TEXT for optimization.

For GCC, this slightly changes the version string. I do not think it
is a big deal as we do not have the defined format for LINUX_COMPILER.
In fact, the recent commit 4dcc9a8844 ("kbuild: mkcompile_h:
Include $LD version in /proc/version") added the linker version.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-12 13:28:33 +09:00
Masahiro Yamada 01a6126b5f kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h
scripts/mkcompile_h uses $(CC) only for getting the version string.

I suspected there was a specific reason why the additional flags were
needed, and dug the commit history. This code dates back to at least
2002 [1], but I could not get any more clue.

Just get rid of it.

[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=29f3df7eba8ddf91a55183f9967f76fbcc3ab742

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
2020-04-09 00:13:45 +09:00
Kees Cook 4dcc9a8844 kbuild: mkcompile_h: Include $LD version in /proc/version
When doing Clang builds of the kernel, it is possible to link with
either ld.bfd (binutils) or ld.lld (LLVM), but it is not possible to
discover this from a running kernel. Add the "$LD -v" output to
/proc/version.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-09 00:13:45 +09:00
Thomas Gleixner 4b950bb9ac Kbuild: Handle PREEMPT_RT for version string and magic
Update the build scripts and the version magic to reflect when
CONFIG_PREEMPT_RT is enabled in the same way as CONFIG_PREEMPT is treated.

The resulting version strings:

  Linux m 5.3.0-rc1+ #100 SMP Fri Jul 26 ...
  Linux m 5.3.0-rc1+ #101 SMP PREEMPT Fri Jul 26 ...
  Linux m 5.3.0-rc1+ #102 SMP PREEMPT_RT Fri Jul 26 ...

The module vermagic:

  5.3.0-rc1+ SMP mod_unload modversions
  5.3.0-rc1+ SMP preempt mod_unload modversions
  5.3.0-rc1+ SMP preempt_rt mod_unload modversions

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-14 01:10:42 +09:00
David Howells 0500871f21 Construct init thread stack in the linker script rather than by union
Construct the init thread stack in the linker script rather than doing it
by means of a union so that ia64's init_task.c can be got rid of.

The following symbols are then made available from INIT_TASK_DATA() linker
script macro:

	init_thread_union
	init_stack

INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the
size of the init stack.  init_thread_union is given its own section so that
it can be placed into the stack space in the right order.  I'm assuming
that the ia64 ordering is correct and that the task_struct is first and the
thread_info second.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Will Deacon <will.deacon@arm.com> (arm64)
Tested-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-09 23:21:02 +00:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Nicholas Piggin b67067f117 kbuild: allow archs to select link dead code/data elimination
Introduce LD_DEAD_CODE_DATA_ELIMINATION option for architectures to
select to build with -ffunction-sections, -fdata-sections, and link
with --gc-sections. It requires some work (documented) to ensure all
unreferenced entrypoints are live, and requires toolchain and build
verification, so it is made a per-arch option for now.

On a random powerpc64le build, this yelds a significant size saving,
it boots and runs fine, but there is a lot I haven't tested as yet, so
these savings may be reduced if there are bugs in the link.

    text      data        bss        dec   filename
11169741   1180744    1923176	14273661   vmlinux
10445269   1004127    1919707	13369103   vmlinux.dce

~700K text, ~170K data, 6% removed from kernel image size.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-09-09 10:47:00 +02:00
Thomas Gleixner a6359d1eec init_task: Replace CONFIG_HAVE_GENERIC_INIT_TASK
Now that all archs except ia64 are converted, replace the config and
let the ia64 select CONFIG_ARCH_INIT_TASK

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20120503085035.867948914@linutronix.de
2012-05-05 13:00:46 +02:00
Thomas Gleixner a4a2eb490e init_task: Create generic init_task instance
All archs define init_task in the same way (except ia64, but there is
no particular reason why ia64 cannot use the common version). Create a
generic instance so all archs can be converted over.

The config switch is temporary and will be removed when all archs are
converted over.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20120503085034.092585287@linutronix.de
2012-05-05 13:00:21 +02:00
Sam Ravnborg 9204595405 kbuild: move compile.h to include/generated
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:14 +01:00
Sam Ravnborg fab1e310d3 kbuild: fix make V=1
When make -s support were added to filechk to
combination created with make V=1 were not
covered.
Fix it by explicitly cover this case too.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2008-02-11 17:43:54 +01:00
Mike Frysinger d75f4c683f kbuild: silence CHK/UPD messages according to $(quiet)
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-09 10:43:58 +01:00
Sam Ravnborg a0f97e06a4 kbuild: enable 'make CFLAGS=...' to add additional options to CC
The variable CFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.
On top of that several people over time has asked for a way to
pass in additional flags to gcc.

This patch replace use of CFLAGS with KBUILD_CFLAGS all over the
tree and enabling one to use:
make CFLAGS=...
to specify additional gcc commandline options.

One usecase is when trying to find gcc bugs but other
use cases has been requested too.

Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k

Test was simple to do a defconfig build, apply the patch and check
that nothing got rebuild.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-14 22:21:35 +02:00
Jean-Paul Saman c33df4eaaf [PATCH] disable init/initramfs.c
The file init/initramfs.c is always compiled and linked in the kernel
vmlinux even when BLK_DEV_RAM and BLK_DEV_INITRD are disabled and the
system isn't using any form of an initramfs or initrd.  In this situation
the code is only used to unpack a (static) default initial rootfilesystem.
The current init/initramfs.c code.  usr/initramfs_data.o compiles to a size
of ~15 kbytes.  Disabling BLK_DEV_RAM and BLK_DEV_INTRD shrinks the kernel
code size with ~60 Kbytes.

This patch avoids compiling in the code and data for initramfs support if
CONFIG_BLK_DEV_INITRD is not defined.  Instead of the initramfs code and
data it uses a small routine in init/noinitramfs.c to setup an initial
static default environment for mounting a rootfilesystem later on in the
kernel initialisation process.  The new code is: 164 bytes of size.

The patch is separated in two parts:
1) doesn't compile initramfs code when CONFIG_BLK_DEV_INITRD is not set
2) changing all plaforms vmlinux.lds.S files to not reserve an area of
PAGE_SIZE when CONFIG_BLK_DEV_INITRD is not set.

[deweerdt@free.fr: warning fix]
Signed-off-by: Jean-Paul Saman <jean-paul.saman@nxp.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:25 -08:00
Roman Zippel 3eb3c740f5 [PATCH] fix linux banner format string
Revert previous attempts at messing with the linux banner string and
simply use a separate format string for proc.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-10 09:33:59 -08:00
Andrew Morton ef129412b4 [PATCH] build compile.h earlier
compile.h is created super-late in the build.  But proc_misc.c want to include
it, and it's generally not sane to have a header file in include/linux be
created at the end of the build: it's either not present or, worse, wrong for
most of the build.

So the patch arranges for compile.h to be built at the start of the build
process.  It also consolidates the compile.h rules with those for version.h
and utsname.h, so they all get built together.

I hope.  My chances of having got this right are about 2%.

Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-22 08:55:51 -08:00
Herbert Poetzl a2ee8649ba [PATCH] Fix linux banner utsname information
utsname information is shown in the linux banner, which also is used for
/proc/version (which can have different utsname values inside a uts
namespaces).  this patch makes the varying data arguments and changes the
string to a format string, using those arguments.

Signed-off-by: Herbert Poetzl <herbert@13thfloor.at>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:37 -08:00
Greg Kroah-Hartman bdaf852938 [PATCH] devfs: Remove devfs from the init code
This patch removes the devfs code from the init/ directory.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:05 -07:00
Sam Ravnborg bd5bdd875b kbuild: "PREEMPT" in UTS_VERSION
From: Matt Mackall <mpm@selenic.com>

Add PREEMPT to UTS_VERSION where enabled as is done for SMP to make
preempt kernels easily identifiable.
Added SMP PREEMPT as comment in compile.h to force it to be
updated when they change (sam).

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-07-14 20:18:07 +00:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00