pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Implement a common set of APIs needed to support pstore storage zones,
based on how ramoops is designed. This will be used by pstore/blk with
the intention of migrating pstore/ram in the future.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-2-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Now that pstore_register() can correctly pass max_reason to the kmesg
dump facility, introduce a new "max_reason" module parameter and
"max-reason" Device Tree field.
The "dump_oops" module parameter and "dump-oops" Device
Tree field are now considered deprecated, but are now automatically
converted to their corresponding max_reason values when present, though
the new max_reason setting has precedence.
For struct ramoops_platform_data, the "dump_oops" member is entirely
replaced by a new "max_reason" member, with the only existing user
updated in place.
Additionally remove the "reason" filter logic from ramoops_pstore_write(),
as that is not specifically needed anymore, though technically
this is a change in behavior for any ramoops users also setting the
printk.always_kmsg_dump boot param, which will cause ramoops to behave as
if max_reason was set to KMSG_DUMP_MAX.
Co-developed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/lkml/20200515184434.8470-6-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
Add a new member to struct pstore_info for passing information about
kmesg dump maximum reason. This allows a finer control of what kmesg
dumps are sent to pstore storage backends.
Those backends that do not explicitly set this field (keeping it equal to
0), get the default behavior: store only Oopses and Panics, or everything
if the printk.always_kmsg_dump boot param is set.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/lkml/20200515184434.8470-5-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
The pstore subsystem already had a private version of this function.
With the coming addition of the pstore/zone driver, this needs to be
shared. As it really should live with printk, move it there instead.
Link: https://lore.kernel.org/lkml/20200515184434.8470-4-keescook@chromium.org/
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
This changes the ftrace record merging code to be agnostic of
pstore/ram, as the first step to making it available as a generic
routine for other backends to use, such as pstore/zone.
Link: https://lore.kernel.org/lkml/20200510202436.63222-6-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
In order to more cleanly pass around backend names, make the "name" member
const. This means the module param needs to be dynamic (technically, it
was before, so this actually cleans up a minor memory leak if a backend
was specified and then gets unloaded.)
Link: https://lore.kernel.org/lkml/20200510202436.63222-3-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
The CON_ENABLED flag gets cleared during unregister_console(), so make
sure we already reset the console flags before calling register_console(),
otherwise unloading and reloading a pstore backend will not restart
console logging.
Signed-off-by: Kees Cook <keescook@chromium.org>
If a backend was unloaded without having first removed all its
associated records in pstorefs, subsequent removals would crash while
attempting to call into the now missing backend. Add automatic removal
from the tree in pstore_unregister(), so that no references to the
backend remain.
Reported-by: Luis Henriques <lhenriques@suse.com>
Link: https://lore.kernel.org/lkml/87o8yrmv69.fsf@suse.com
Link: https://lore.kernel.org/lkml/20200506152114.50375-11-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
The pstore.update_ms value was being disabled during pstore_unregister(),
which would cause any prior value to go unnoticed on the next
pstore_register(). Instead, just let del_timer() stop the timer, which
was always sufficient. This additionally refactors the timer reset code
and allows the timer to be enabled if the module parameter is changed
away from the default.
Link: https://lore.kernel.org/lkml/20200506152114.50375-10-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
Nothing was protecting changes to the pstorefs superblock. Add locking
and refactor away is_pstore_mounted(), instead using a helper to add a
way to safely lock the pstorefs root inode during filesystem changes.
Link: https://lore.kernel.org/lkml/20200506152114.50375-9-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
The "unlink" handling should perform list removal (which can also make
sure records don't get double-erased), and the "evict" handling should
be responsible only for memory freeing.
Link: https://lore.kernel.org/lkml/20200506152114.50375-8-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
The pstorefs internal list lock doesn't need to be a spinlock and will
create problems when trying to access the list in the subsequent patch
that will walk the pstorefs records during pstore_unregister(). Change
this to a mutex to avoid may_sleep() warnings when unregistering devices.
Link: https://lore.kernel.org/lkml/20200506152114.50375-6-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
The name "allpstore" doesn't carry much meaning, so rename it to what it
actually is: the list of all records present in the filesystem. The lock
is also renamed accordingly.
Link: https://lore.kernel.org/lkml/20200506152114.50375-5-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
Currently pstore can only have a single backend attached at a time, and it
tracks the active backend via "psinfo", under a lock. The locking for this
does not need to be a spinlock, and in order to avoid may_sleep() issues
during future changes to pstore_unregister(), switch to a mutex instead.
Link: https://lore.kernel.org/lkml/20200506152114.50375-4-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
There is no reason to be doing a module get/put in pstore_register(),
since the module calling pstore_register() cannot be unloaded since it
hasn't finished its initialization. Remove it so there is no confusion
about how registration ordering works.
Link: https://lore.kernel.org/lkml/20200506152114.50375-2-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
-----BEGIN PGP SIGNATURE-----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=tstz
-----END PGP SIGNATURE-----
Merge tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Ten cifs/smb fixes:
- five RDMA (smbdirect) related fixes
- add experimental support for swap over SMB3 mounts
- also a fix which improves performance of signed connections"
* tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: enable swap on SMB3 mounts
smb3: change noisy error message to FYI
smb3: smbdirect support can be configured by default
cifs: smbd: Do not schedule work to send immediate packet on every receive
cifs: smbd: Properly process errors on ib_post_send
cifs: Allocate crypto structures on the fly for calculating signatures of incoming packets
cifs: smbd: Update receive credits before sending and deal with credits roll back on failure before sending
cifs: smbd: Check send queue size before posting a send
cifs: smbd: Merge code to track pending packets
cifs: ignore cached share root handle closing errors
Another brown paper bag moment. pnfs_alloc_ds_commits_list() is leaking
the RCU lock.
Fixes: a9901899b6 ("pNFS: Add infrastructure for cleaning up per-layout commit structures")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Merge yet more updates from Andrew Morton:
- Almost all of the rest of MM (memcg, slab-generic, slab, pagealloc,
gup, hugetlb, pagemap, memremap)
- Various other things (hfs, ocfs2, kmod, misc, seqfile)
* akpm: (34 commits)
ipc/util.c: sysvipc_find_ipc() should increase position index
kernel/gcov/fs.c: gcov_seq_next() should increase position index
fs/seq_file.c: seq_read(): add info message about buggy .next functions
drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings
change email address for Pali Rohár
selftests: kmod: test disabling module autoloading
selftests: kmod: fix handling test numbers above 9
docs: admin-guide: document the kernel.modprobe sysctl
fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()
kmod: make request_module() return an error when autoloading is disabled
mm/memremap: set caching mode for PCI P2PDMA memory to WC
mm/memory_hotplug: add pgprot_t to mhp_params
powerpc/mm: thread pgprot_t through create_section_mapping()
x86/mm: introduce __set_memory_prot()
x86/mm: thread pgprot_t through init_memory_mapping()
mm/memory_hotplug: rename mhp_restrictions to mhp_params
mm/memory_hotplug: drop the flags field from struct mhp_restrictions
mm/special: create generic fallbacks for pte_special() and pte_mkspecial()
mm/vma: introduce VM_ACCESS_FLAGS
mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS
...
Fix: Christoph Hellwig noticed that some logic I added to
orangefs_file_read_iter introduced a race condition, so he
sent a reversion patch. I had to modify his patch since
reverting at this point broke Orangefs.
Cleanup 1: Christoph Hellwig noticed that we were doing some unnecessary
work in orangefs_flush, so he sent in a patch that removed
the un-needed code.
Cleanup 2: Al Viro told me he had trouble building Orangefs. Orangefs
should be easy to build, even for Al :-). I looked back
at the test server build notes in orangefs.txt, just in case
that's where the trouble really is, and found a couple of
typos and made a couple of clarifications.
Merge Conflict: Stephen Rothwell reported that my modifications to
orangefs.txt caused a merge conflict with orangefs.rst
in Linux Next. I wasn't sure what to do, so I asked,
and Jonathan Corbet said not to worry about it and
just to report it to Linus.
-----BEGIN PGP SIGNATURE-----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=dNWv
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.7-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs updates from Mike Marshall:
"A fix and two cleanups.
Fix:
- Christoph Hellwig noticed that some logic I added to
orangefs_file_read_iter introduced a race condition, so he sent a
reversion patch. I had to modify his patch since reverting at this
point broke Orangefs.
Cleanups:
- Christoph Hellwig noticed that we were doing some unnecessary work
in orangefs_flush, so he sent in a patch that removed the un-needed
code.
- Al Viro told me he had trouble building Orangefs. Orangefs should
be easy to build, even for Al :-).
I looked back at the test server build notes in orangefs.txt, just
in case that's where the trouble really is, and found a couple of
typos and made a couple of clarifications"
* tag 'for-linus-5.7-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: clarify build steps for test server in orangefs.txt
orangefs: don't mess with I_DIRTY_TIMES in orangefs_flush
orangefs: get rid of knob code...
Patch series "seq_file .next functions should increase position index".
In Aug 2018 NeilBrown noticed commit 1f4aace60b ("fs/seq_file.c:
simplify seq_file iteration code and interface")
"Some ->next functions do not increment *pos when they return NULL...
Note that such ->next functions are buggy and should be fixed. A simple
demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size
larger than the size of /proc/swaps. This will always show the whole
last line of /proc/swaps"
Described problem is still actual. If you make lseek into middle of
last output line following read will output end of last line and whole
last line once again.
$ dd if=/proc/swaps bs=1 # usual output
Filename Type Size Used Priority
/dev/dm-0 partition 4194812 97536 -2
104+0 records in
104+0 records out
104 bytes copied
$ dd if=/proc/swaps bs=40 skip=1 # last line was generated twice
dd: /proc/swaps: cannot skip to specified offset
v/dm-0 partition 4194812 97536 -2
/dev/dm-0 partition 4194812 97536 -2
3+1 records in
3+1 records out
131 bytes copied
There are lot of other affected files, I've found 30+ including
/proc/net/ip_tables_matches and /proc/sysvipc/*
I've sent patches into maillists of affected subsystems already, this
patch-set fixes the problem in files related to pstore, tracing, gcov,
sysvipc and other subsystems processed via linux-kernel@ mailing list
directly
https://bugzilla.kernel.org/show_bug.cgi?id=206283
This patch (of 4):
Add debug code to seq_read() to detect missed or out-of-tree incorrect
.next seq_file functions.
[akpm@linux-foundation.org: s/pr_info/pr_info_ratelimited/, per Qian Cai]
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: NeilBrown <neilb@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Waiman Long <longman@redhat.com>
Link: http://lkml.kernel.org/r/244674e5-760c-86bd-d08a-047042881748@virtuozzo.com
Link: http://lkml.kernel.org/r/7c24087c-e280-e580-5b0c-0cdaeb14cd18@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For security reasons I stopped using gmail account and kernel address is
now up-to-date alias to my personal address.
People periodically send me emails to address which they found in source
code of drivers, so this change reflects state where people can contact
me.
[ Added .mailmap entry as per Joe Perches - Linus ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200307104237.8199-1-pali@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After request_module(), nothing is stopping the module from being
unloaded until someone takes a reference to it via try_get_module().
The WARN_ONCE() in get_fs_type() is thus user-reachable, via userspace
running 'rmmod' concurrently.
Since WARN_ONCE() is for kernel bugs only, not for user-reachable
situations, downgrade this warning to pr_warn_once().
Keep it printed once only, since the intent of this warning is to detect
a bug in modprobe at boot time. Printing the warning more than once
wouldn't really provide any useful extra information.
Fixes: 41124db869 ("fs: warn in case userspace lied about modprobe return")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jessica Yu <jeyu@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: NeilBrown <neilb@suse.com>
Cc: <stable@vger.kernel.org> [4.13+]
Link: http://lkml.kernel.org/r/20200312202552.241885-3-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linux fallocate(2) with FALLOC_FL_PUNCH_HOLE mode set, its offset can
exceed the inode size. Ocfs2 now doesn't allow that offset beyond inode
size. This restriction is not necessary and violates fallocate(2)
semantics.
If fallocate(2) offset is beyond inode size, just return success and do
nothing further.
Otherwise, ocfs2 will crash the kernel.
kernel BUG at fs/ocfs2//alloc.c:7264!
ocfs2_truncate_inline+0x20f/0x360 [ocfs2]
ocfs2_remove_inode_range+0x23c/0xcb0 [ocfs2]
__ocfs2_change_file_space+0x4a5/0x650 [ocfs2]
ocfs2_fallocate+0x83/0xa0 [ocfs2]
vfs_fallocate+0x148/0x230
SyS_fallocate+0x48/0x80
do_syscall_64+0x79/0x170
Signed-off-by: Changwei Ge <chge@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200407082754.17565-1-chge@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When removing files containing extended attributes, the hfsplus driver may
remove the wrong entries from the attributes b-tree, causing major
filesystem damage and in some cases even kernel crashes.
To remove a file, all its extended attributes have to be removed as well.
The driver does this by looking up all keys in the attributes b-tree with
the cnid of the file. Each of these entries then gets deleted using the
key used for searching, which doesn't contain the attribute's name when it
should. Since the key doesn't contain the name, the deletion routine will
not find the correct entry and instead remove the one in front of it. If
parent nodes have to be modified, these become corrupt as well. This
causes invalid links and unsorted entries that not even macOS's fsck_hfs
is able to fix.
To fix this, modify the search key before an entry is deleted from the
attributes b-tree by copying the found entry's key into the search key,
therefore ensuring that the correct entry gets removed from the tree.
Signed-off-by: Simon Gander <simon@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Anton Altaparmakov <anton@tuxera.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200327155541.1521-1-simon@tuxera.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull proc fix from Eric Biederman:
"A brown paper bag slipped through my proc changes, and syzcaller
caught it when the code ended up in your tree.
I have opted to fix it the simplest cleanest way I know how, so there
is no reasonable chance for the bug to repeat"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
proc: Use a dedicated lock in struct pid
Add experimental support for allowing a swap file to be on an SMB3
mount. There are use cases where swapping over a secure network
filesystem is preferable. In some cases there are no local
block devices large enough, and network block devices can be
hard to setup and secure. And in some cases there are no
local block devices at all (e.g. with the recent addition of
remote boot over SMB3 mounts).
There are various enhancements that can be added later e.g.:
- doing a mandatory byte range lock over the swapfile (until
the Linux VFS is modified to notify the file system that an open
is for a swapfile, when the file can be opened "DENY_ALL" to prevent
others from opening it).
- pinning more buffers in the underlying transport to minimize memory
allocations in the TCP stack under the fs
- documenting how to create ACLs (on the server) to secure the
swapfile (or adding additional tools to cifs-utils to make it easier)
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
-----BEGIN PGP SIGNATURE-----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=2R2G
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.7-2020-04-09' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Here's a set of fixes that either weren't quite ready for the first,
or came about from some intensive testing on memcached with 350K+
sockets.
Summary:
- Fixes for races or deadlocks around poll handling
- Don't double account fixed files against RLIMIT_NOFILE
- IORING_OP_OPENAT LFS fix
- Poll retry handling (Bijan)
- Missing finish_wait() for SQPOLL (Hillf)
- Cleanup/split of io_kiocb alloc vs ctx references (Pavel)
- Fixed file unregistration and init fixes (Xiaoguang)
- Various little fixes (Xiaoguang, Pavel, Colin)"
* tag 'io_uring-5.7-2020-04-09' of git://git.kernel.dk/linux-block:
io_uring: punt final io_ring_ctx wait-and-free to workqueue
io_uring: fix fs cleanup on cqe overflow
io_uring: don't read user-shared sqe flags twice
io_uring: remove req init from io_get_req()
io_uring: alloc req only after getting sqe
io_uring: simplify io_get_sqring
io_uring: do not always copy iovec in io_req_map_rw()
io_uring: ensure openat sets O_LARGEFILE if needed
io_uring: initialize fixed_file_data lock
io_uring: remove redundant variable pointer nxt and io_wq_assign_next call
io_uring: fix ctx refcounting in io_submit_sqes()
io_uring: process requests completed with -EAGAIN on poll list
io_uring: remove bogus RLIMIT_NOFILE check in file registration
io_uring: use io-wq manager as backup task if task is exiting
io_uring: grab task reference for poll requests
io_uring: retry poll if we got woken with non-matching mask
io_uring: add missing finish_wait() in io_sq_thread()
io_uring: refactor file register/unregister/update handling
- Validate the realtime geometry in the superblock when mounting
- Refactor a bunch of tricky flag handling in the log code
- Flush the CIL more judiciously so that we don't wait until there are
millions of log items consuming a lot of memory.
- Throttle transaction commits to prevent the xfs frontend from flooding
the CIL with too many log items.
- Account metadata buffers correctly for memory reclaim.
- Mark slabs properly for memory reclaim. These should help reclaim run
more effectively when XFS is using a lot of memory.
- Don't write a garbage log record at unmount time if we're trying to
trigger summary counter recalculation at next mount.
- Don't block the AIL on locked dquot/inode buffers; instead trigger its
backoff mechanism to give the lock holder a chance to finish up.
- Ratelimit writeback flushing when buffered writes encounter ENOSPC.
- Other minor cleanups.
- Make reflink a synchronous operation when the fs is mounted with wsync
or sync, which means that now we force the log to disk to record the
changes.
-----BEGIN PGP SIGNATURE-----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=+M2M
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.7-merge-12' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull more xfs updates from Darrick Wong:
"As promised last week, this batch changes how xfs interacts with
memory reclaim; how the log batches and throttles log items; how hard
writes near ENOSPC will try to squeeze more space out of the
filesystem; and hopefully fix the last of the umount hangs after a
catastrophic failure.
Summary:
- Validate the realtime geometry in the superblock when mounting
- Refactor a bunch of tricky flag handling in the log code
- Flush the CIL more judiciously so that we don't wait until there
are millions of log items consuming a lot of memory.
- Throttle transaction commits to prevent the xfs frontend from
flooding the CIL with too many log items.
- Account metadata buffers correctly for memory reclaim.
- Mark slabs properly for memory reclaim. These should help reclaim
run more effectively when XFS is using a lot of memory.
- Don't write a garbage log record at unmount time if we're trying to
trigger summary counter recalculation at next mount.
- Don't block the AIL on locked dquot/inode buffers; instead trigger
its backoff mechanism to give the lock holder a chance to finish
up.
- Ratelimit writeback flushing when buffered writes encounter ENOSPC.
- Other minor cleanups.
- Make reflink a synchronous operation when the fs is mounted with
wsync or sync, which means that now we force the log to disk to
record the changes"
* tag 'xfs-5.7-merge-12' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (26 commits)
xfs: reflink should force the log out if mounted with wsync
xfs: factor out a new xfs_log_force_inode helper
xfs: fix inode number overflow in ifree cluster helper
xfs: remove redundant variable assignment in xfs_symlink()
xfs: ratelimit inode flush on buffered write ENOSPC
xfs: return locked status of inode buffer on xfsaild push
xfs: trylock underlying buffer on dquot flush
xfs: remove unnecessary ternary from xfs_create
xfs: don't write a corrupt unmount record to force summary counter recalc
xfs: factor inode lookup from xfs_ifree_cluster
xfs: tail updates only need to occur when LSN changes
xfs: factor common AIL item deletion code
xfs: correctly acount for reclaimable slabs
xfs: Improve metadata buffer reclaim accountability
xfs: don't allow log IO to be throttled
xfs: Throttle commits on delayed background CIL push
xfs: Lower CIL flush limit for large logs
xfs: remove some stale comments from the log code
xfs: refactor unmount record writing
xfs: merge xlog_commit_record with xlog_write_done
...
We can't reliably wait in io_ring_ctx_wait_and_kill(), since the
task_works list isn't ordered (in fact it's LIFO ordered). We could
either fix this with a separate task_works list for io_uring work, or
just punt the wait-and-free to async context. This ensures that
task_work that comes in while we're shutting down is processed
correctly. If we don't go async, we could have work past the fput()
work for the ring that depends on work that won't be executed until
after we're done with the wait-and-free. But as this operation is
blocking, it'll never get a chance to run.
This was reproduced with hundreds of thousands of sockets running
memcached, haven't been able to reproduce this synthetically.
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The noisy posix error message in readdir was supposed
to be an FYI (not enabled by default)
CIFS VFS: XXX dev 66306, reparse 0, mode 755
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
- A fix for a crash in machine check handling on pseries (ie. guests)
- A small series to make it possible to disable CONFIG_COMPAT, and turn it off
by default for ppc64le where it's not used.
- A few other miscellaneous fixes and small improvements.
Thanks to:
Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann, Christophe Leroy, Dan
Carpenter, Ganesh Goudar, Geert Uytterhoeven, Geoff Levand, Mahesh Salgaonkar,
Markus Elfring, Michal Suchanek, Nicholas Piggin, Stephen Boyd, Wen Xiong.
-----BEGIN PGP SIGNATURE-----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=72sb
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
"The bulk of this is the series to make CONFIG_COMPAT user-selectable,
it's been around for a long time but was blocked behind the
syscall-in-C series.
Plus there's also a few fixes and other minor things.
Summary:
- A fix for a crash in machine check handling on pseries (ie. guests)
- A small series to make it possible to disable CONFIG_COMPAT, and
turn it off by default for ppc64le where it's not used.
- A few other miscellaneous fixes and small improvements.
Thanks to: Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann,
Christophe Leroy, Dan Carpenter, Ganesh Goudar, Geert Uytterhoeven,
Geoff Levand, Mahesh Salgaonkar, Markus Elfring, Michal Suchanek,
Nicholas Piggin, Stephen Boyd, Wen Xiong"
* tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Always build the tm-poison test 64-bit
powerpc: Improve ppc_save_regs()
Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled"
powerpc/time: Replace <linux/clk-provider.h> by <linux/of_clk.h>
powerpc/pseries/ddw: Extend upper limit for huge DMA window for persistent memory
powerpc/perf: split callchain.c by bitness
powerpc/64: Make COMPAT user-selectable disabled on littleendian by default.
powerpc/64: make buildable without CONFIG_COMPAT
powerpc/perf: consolidate valid_user_sp -> invalid_user_sp
powerpc/perf: consolidate read_user_stack_32
powerpc: move common register copy functions from signal_32.c to signal.c
powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro
powerpc/ps3: Set CONFIG_UEVENT_HELPER=y in ps3_defconfig
powerpc/ps3: Remove an unneeded NULL check
powerpc/ps3: Remove duplicate error message
powerpc/powernv: Re-enable imc trace-mode in kernel
powerpc/perf: Implement a global lock to avoid races between trace, core and thread imc events.
powerpc/pseries: Fix MCE handling on pseries
selftests/eeh: Skip ahci adapters
powerpc/64s: Fix doorbell wakeup msgclr optimisation
syzbot wrote:
> ========================================================
> WARNING: possible irq lock inversion dependency detected
> 5.6.0-syzkaller #0 Not tainted
> --------------------------------------------------------
> swapper/1/0 just changed the state of lock:
> ffffffff898090d8 (tasklist_lock){.+.?}-{2:2}, at: send_sigurg+0x9f/0x320 fs/fcntl.c:840
> but this lock took another, SOFTIRQ-unsafe lock in the past:
> (&pid->wait_pidfd){+.+.}-{2:2}
>
>
> and interrupts could create inverse lock ordering between them.
>
>
> other info that might help us debug this:
> Possible interrupt unsafe locking scenario:
>
> CPU0 CPU1
> ---- ----
> lock(&pid->wait_pidfd);
> local_irq_disable();
> lock(tasklist_lock);
> lock(&pid->wait_pidfd);
> <Interrupt>
> lock(tasklist_lock);
>
> *** DEADLOCK ***
>
> 4 locks held by swapper/1/0:
The problem is that because wait_pidfd.lock is taken under the tasklist
lock. It must always be taken with irqs disabled as tasklist_lock can be
taken from interrupt context and if wait_pidfd.lock was already taken this
would create a lock order inversion.
Oleg suggested just disabling irqs where I have added extra calls to
wait_pidfd.lock. That should be safe and I think the code will eventually
do that. It was rightly pointed out by Christian that sharing the
wait_pidfd.lock was a premature optimization.
It is also true that my pre-merge window testing was insufficient. So
remove the premature optimization and give struct pid a dedicated lock of
it's own for struct pid things. I have verified that lockdep sees all 3
paths where we take the new pid->lock and lockdep does not complain.
It is my current day dream that one day pid->lock can be used to guard the
task lists as well and then the tasklist_lock won't need to be held to
deliver signals. That will require taking pid->lock with irqs disabled.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/lkml/00000000000011d66805a25cd73f@google.com/
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Reported-by: syzbot+343f75cdeea091340956@syzkaller.appspotmail.com
Reported-by: syzbot+832aabf700bc3ec920b9@syzkaller.appspotmail.com
Reported-by: syzbot+f675f964019f884dbd0f@syzkaller.appspotmail.com
Reported-by: syzbot+a9fb1457d720a55d6dc5@syzkaller.appspotmail.com
Fixes: 7bc3e6e55a ("proc: Use a list of inodes to flush from proc")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
If completion queue overflow occurs, __io_cqring_fill_event() will
update req->cflags, which is in a union with req->work and happens to
be aliased to req->work.fs. Following io_free_req() ->
io_req_work_drop_env() may get a bunch of different problems (miscount
fs->users, segfault, etc) on cleaning @fs.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- support for asynchronous create and unlink (Jeff Layton). Creates
and unlinks are satisfied locally, without waiting for a reply from
the MDS, provided the client has been granted appropriate caps (new
in v15.y.z ("Octopus") release). This can be a big help for metadata
heavy workloads such as tar and rsync. Opt-in with the new nowsync
mount option.
- multiple blk-mq queues for rbd (Hannes Reinecke and myself). When
the driver was converted to blk-mq, we settled on a single blk-mq
queue because of a global lock in libceph and some other technical
debt. These have since been addressed, so allocate a queue per CPU
to enhance parallelism.
- don't hold onto caps that aren't actually needed (Zheng Yan). This
has been our long-standing behavior, but it causes issues with some
active/standby applications (synchronous I/O, stalls if the standby
goes down, etc).
- .snap directory timestamps consistent with ceph-fuse (Luis Henriques)
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl6OEO4THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi0XNB/wItYipkjlL5fIUBqiRWzYai72DWdPp
CnOZo8LB+O0MQDomPT6DdpU1OMlWZi5HF7zklrZ35LTm21UkRNC9zvccjs9l66PJ
qo9cKJbxxju+hgzIvgvK9PjlDlaiFAc/pkF8lZ/NaOnSsM1vvsFL9IuY2LXS38MY
A/uUTZNUnFy5udam8TPuN+gWwZcUIH48lRWQLWe2I/hNJSweX1l8OHvecOBg+cYH
G+8vb7mLU2V9ky0YT5JJmVxUV3CWA5wH6ZrWWy1ofVDdeSFLPrhgWX6IMjaNq+Gd
xPfxmly47uBviSqON9dMkiThgy0Qj7yi0Pvx+1sAZbD7aj/6A4qg3LX5
=GIX0
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.7-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The main items are:
- support for asynchronous create and unlink (Jeff Layton).
Creates and unlinks are satisfied locally, without waiting for a
reply from the MDS, provided the client has been granted
appropriate caps (new in v15.y.z ("Octopus") release). This can be
a big help for metadata heavy workloads such as tar and rsync.
Opt-in with the new nowsync mount option.
- multiple blk-mq queues for rbd (Hannes Reinecke and myself).
When the driver was converted to blk-mq, we settled on a single
blk-mq queue because of a global lock in libceph and some other
technical debt. These have since been addressed, so allocate a
queue per CPU to enhance parallelism.
- don't hold onto caps that aren't actually needed (Zheng Yan).
This has been our long-standing behavior, but it causes issues with
some active/standby applications (synchronous I/O, stalls if the
standby goes down, etc).
- .snap directory timestamps consistent with ceph-fuse (Luis
Henriques)"
* tag 'ceph-for-5.7-rc1' of git://github.com/ceph/ceph-client: (49 commits)
ceph: fix snapshot directory timestamps
ceph: wait for async creating inode before requesting new max size
ceph: don't skip updating wanted caps when cap is stale
ceph: request new max size only when there is auth cap
ceph: cleanup return error of try_get_cap_refs()
ceph: return ceph_mdsc_do_request() errors from __get_parent()
ceph: check all mds' caps after page writeback
ceph: update i_requested_max_size only when sending cap msg to auth mds
ceph: simplify calling of ceph_get_fmode()
ceph: remove delay check logic from ceph_check_caps()
ceph: consider inode's last read/write when calculating wanted caps
ceph: always renew caps if mds_wanted is insufficient
ceph: update dentry lease for async create
ceph: attempt to do async create when possible
ceph: cache layout in parent dir on first sync create
ceph: add new MDS req field to hold delegated inode number
ceph: decode interval_sets for delegated inos
ceph: make ceph_fill_inode non-static
ceph: perform asynchronous unlink if we have sufficient caps
ceph: don't take refs to want mask unless we have all bits
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXosx9gAKCRDh3BK/laaZ
PPW3AQDYShgXR4gqVL25lxJ1IKaIikIug8EC7S9/a3DMNMpPQAEA+kCrdkpnaJVc
DESmHyMDw7EtgeZXu+xkRlFfEU8BOgc=
=0WQh
-----END PGP SIGNATURE-----
Merge tag 'ovl-update-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs update from Miklos Szeredi:
- Fix failure to copy-up files from certain NFSv4 mounts
- Sort out inconsistencies between st_ino and i_ino (used in /proc/locks)
- Allow consistent (POSIX-y) inode numbering in more cases
- Allow virtiofs to be used as upper layer
- Miscellaneous cleanups and fixes
* tag 'ovl-update-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: document xino expected behavior
ovl: enable xino automatically in more cases
ovl: avoid possible inode number collisions with xino=on
ovl: use a private non-persistent ino pool
ovl: fix WARN_ON nlink drop to zero
ovl: fix a typo in comment
ovl: replace zero-length array with flexible-array member
ovl: ovl_obtain_alias(): don't call d_instantiate_anon() for old
ovl: strict upper fs requirements for remote upper fs
ovl: check if upper fs supports RENAME_WHITEOUT
ovl: allow remote upper
ovl: decide if revalidate needed on a per-dentry basis
ovl: separate detection of remote upper layer from stacked overlay
ovl: restructure dentry revalidation
ovl: ignore failure to copy up unknown xattrs
ovl: document permission model
ovl: simplify i_ino initialization
ovl: factor out helper ovl_get_root()
ovl: fix out of date comment and unreachable code
ovl: fix value of i_ino for lower hardlink corner case
- Fix a problem in readahead where we can crash if we can't allocate a
full bio due to GFP_NORETRY.
-----BEGIN PGP SIGNATURE-----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=5vQD
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.7-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap fix from Darrick Wong:
"Fix a problem in readahead where we can crash if we can't allocate a
full bio due to GFP_NORETRY"
* tag 'iomap-5.7-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: Handle memory allocation failure in readahead
- Add support for region alignment configuration and enforcement to
fix compatibility across architectures and PowerPC page size
configurations.
- Introduce 'zero_page_range' as a dax operation. This facilitates
filesystem-dax operation without a block-device.
- Introduce phys_to_target_node() to facilitate drivers that want to
know resulting numa node if a given reserved address range was
onlined.
- Advertise a persistence-domain for of_pmem and papr_scm. The
persistence domain indicates where cpu-store cycles need to reach in
the platform-memory subsystem before the platform will consider them
power-fail protected.
- Promote numa_map_to_online_node() to a cross-kernel generic facility.
- Save x86 numa information to allow for node-id lookups for reserved
memory ranges, deploy that capability for the e820-pmem driver.
- Pick up some miscellaneous minor fixes, that missed v5.6-final,
including a some smatch reports in the ioctl path and some unit test
compilation fixups.
- Fixup some flexible-array declarations.
-----BEGIN PGP SIGNATURE-----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=sY4N
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and dax updates from Dan Williams:
"There were multiple touches outside of drivers/nvdimm/ this round to
add cross arch compatibility to the devm_memremap_pages() interface,
enhance numa information for persistent memory ranges, and add a
zero_page_range() dax operation.
This cycle I switched from the patchwork api to Konstantin's b4 script
for collecting tags (from x86, PowerPC, filesystem, and device-mapper
folks), and everything looks to have gone ok there. This has all
appeared in -next with no reported issues.
Summary:
- Add support for region alignment configuration and enforcement to
fix compatibility across architectures and PowerPC page size
configurations.
- Introduce 'zero_page_range' as a dax operation. This facilitates
filesystem-dax operation without a block-device.
- Introduce phys_to_target_node() to facilitate drivers that want to
know resulting numa node if a given reserved address range was
onlined.
- Advertise a persistence-domain for of_pmem and papr_scm. The
persistence domain indicates where cpu-store cycles need to reach
in the platform-memory subsystem before the platform will consider
them power-fail protected.
- Promote numa_map_to_online_node() to a cross-kernel generic
facility.
- Save x86 numa information to allow for node-id lookups for reserved
memory ranges, deploy that capability for the e820-pmem driver.
- Pick up some miscellaneous minor fixes, that missed v5.6-final,
including a some smatch reports in the ioctl path and some unit
test compilation fixups.
- Fixup some flexible-array declarations"
* tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits)
dax: Move mandatory ->zero_page_range() check in alloc_dax()
dax,iomap: Add helper dax_iomap_zero() to zero a range
dax: Use new dax zero page method for zeroing a page
dm,dax: Add dax zero_page_range operation
s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver
dax, pmem: Add a dax operation zero_page_range
pmem: Add functions for reading/writing page to/from pmem
libnvdimm: Update persistence domain value for of_pmem and papr_scm device
tools/test/nvdimm: Fix out of tree build
libnvdimm/region: Fix build error
libnvdimm/region: Replace zero-length array with flexible-array member
libnvdimm/label: Replace zero-length array with flexible-array member
ACPI: NFIT: Replace zero-length array with flexible-array member
libnvdimm/region: Introduce an 'align' attribute
libnvdimm/region: Introduce NDD_LABELING
libnvdimm/namespace: Enforce memremap_compat_align()
libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid
libnvdimm: Out of bounds read in __nd_ioctl()
acpi/nfit: improve bounds checking for 'func'
mm/memremap_pages: Introduce memremap_compat_align()
...
Don't re-read userspace-shared sqe->flags, it can be exploited.
sqe->flags are copied into req->flags in io_submit_sqe(), check them
there instead.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_get_req() do two different things: io_kiocb allocation and
initialisation. Move init part out of it and rename into
io_alloc_req(). It's simpler this way and also have better data
locality.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As io_get_sqe() split into 2 stage get/consume, get an sqe before
allocating io_kiocb, so no free_req*() for a failure case is needed,
and inline back __io_req_do_free(), which has only 1 user.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
WeiXiong Liao
Kees Cook
Pavel Tatashin
Linus Torvalds
Trond Myklebust
Vasily Averin
Pali Rohár
Eric Biggers
Changwei Ge
Simon Gander
Steve French
Jens Axboe
Eric W. Biederman
Pavel Begunkov