Граф коммитов

85 Коммитов

Автор SHA1 Сообщение Дата
Ladinu Chandrasinghe b7ed698cc9 Documentation/: fix warnings from -Wmissing-prototypes in HOSTCFLAGS
Fix up -Wmissing-prototypes in compileable userspace code, mainly under
Documentation/.

Signed-off-by: Ladinu Chandrasinghe <ladinu.pub@gmail.com>
Signed-off-by: Trevor Keith <tsrk@tsrk.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:28 -07:00
Linus Torvalds 44040f107e Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (133 commits)
  drm/vgaarb: add VGA arbitration support to the drm and kms.
  drm/radeon: some r420s have a CP race with the DMA engine.
  drm/radeon/r600/kms: rv670 is not DCE3
  drm/radeon/kms: r420 idle after programming GA_ENHANCE
  drm/radeon/kms: more fixes to rv770 suspend/resume path.
  drm/radeon/kms: more alignment for rv770.c with r600.c
  drm/radeon/kms: rv770 blit init called too late.
  drm/radeon/kms: move around new init path code to avoid posting at init
  drm/radeon/r600: fix some issues with suspend/resume.
  drm/radeon/kms: disable VGA rendering engine before taking over VRAM
  drm/radeon/kms: Move radeon_get_clock_info() call out of radeon_clocks_init().
  drm/radeon/kms: add initial connector properties
  drm/radeon/kms: Use surfaces for scanout / cursor byte swapping on big endian.
  drm/radeon/kms: don't fail if we fail to init GPU acceleration
  drm/r600/kms: fixup number of loops per blit calculation.
  drm/radeon/kms: reprogram format in set base.
  drm/radeon: avivo chips have no separate int bit for display
  drm/radeon/r600: don't do interrupts
  drm: fix _DRM_GEM addmap error message
  drm: update crtc x/y when only fb changes
  ...

Fixed up trivial conflicts in firmware/Makefile due to network driver
(cxgb3) and drm (mga/r128/radeon) firmware being listed next to each
other.
2009-09-21 08:10:09 -07:00
Ken Kawasaki 531afd64d0 pcnet_cs: add cis of Linksys multifunction pcmcia card
pcnet_cs,serial_cs:
 
add cis of Linksys lan&modem mulitifunction pcmcia card
and some modem card(MT5634ZLX, RS-COM-2P).

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15 02:42:25 -07:00
Ben Hutchings 70967ab9c0 radeon: Use request_firmware()
Loosely based on a patch by
Jaswinder Singh Rajput <jaswinderlinux@gmail.com>.

KMS support by Dave Airlie <airlied@redhat.com>.

For Radeon 100- to 500-series, firmware blobs look like:
    struct {
        __be32 datah;
        __be32 datal;
    } cp_ucode[256];

For Radeon 600-series, there are two separate firmware blobs:
    __be32 me_ucode[PM4_UCODE_SIZE * 3];
    __be32 pfp_ucode[PFP_UCODE_SIZE];

For Radeon 700-series, likewise:
    __be32 me_ucode[R700_PM4_UCODE_SIZE];
    __be32 pfp_ucode[R700_PFP_UCODE_SIZE];

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31 09:09:30 +10:00
Michael Chan 078b073588 bnx2: Update firmware to 5.0.0.j3.
- Better small packet receive performance.
- Better handling of Flow control on 5709.
- Fixed iSCSI TMP ABORT TASK problem.
- Added iSCSI TCP timestamp option.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29 00:02:46 -07:00
Ben Hutchings 52f97df5da drm/r128: Use request_firmware() to load CCE microcode
Firmware blob looks like this:
    __be32 datah
    __be32 datal

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-27 10:47:00 +10:00
Ben Hutchings ece2be7993 drm/mga: Use request_firmware() to load microcode
Image format is IHEX, one record for each pipe in order (record
addresses are ignored).

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-27 10:46:54 +10:00
Eilon Greenstein a1d58179d1 bnx2x: Removing old FW files
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 22:53:55 -07:00
Eilon Greenstein ca00392cb8 bnx2x: Using the new FW
The new FW improves the packets per second rate. It required a lot of change in
the FW which implies many changes in the driver to support it. It is now also
possible for the driver to use a separate MSI-X vector for Rx and Tx - this also
add some to the complicity of this change.

All things said - after this patch, practically all performance matrixes show
improvement.
Though Vladislav Zolotarov is not signed on this patch, he did most of the job
and deserves credit for that.

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 22:53:28 -07:00
Eilon Greenstein 6200f09036 bnx2x: New FW files
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 22:52:50 -07:00
Divy Le Ray 2e8c07c35b cxgb3: use request_firmware() for the EDC registers setup
use request_firmware() to load the phy's EDC programmation

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08 10:54:24 -07:00
Divy Le Ray 6ba5f9c743 cxgb3: Update FW to 7.4.0
Update FW to 7.4.
Bump up driver revision.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03 21:01:50 -07:00
David S. Miller b2f8f7525c Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/forcedeth.c
2009-06-03 02:43:41 -07:00
Matt Kraai cf4ae4e3de net/firmare: Ignore .cis files
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29 22:06:33 -07:00
Ken Kawasaki f0a3a1538d 3c589_cs: add cis(firmware) of 3Com multifunction pcmcia card
3c589_cs,3c574_cs,serial_cs:

 (1)add cis(firmware) of 3Com lan&modem mulitifunction pcmcia card.
 (2)load correct configuration register for 3Com card
 
Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01 19:21:26 -07:00
Vladislav Zolotarov 94a78b79cb bnx2x: Separated FW from the source.
>From now on FW will be downloaded from the binary file using request_firmware.

There will be different files for every supported chip. Currently 57710 (e1) and
57711 (e1h).

File names have the following format: bnx2x-<chip version>-<FW version>.fw.
ihex versions of current FW files are submitted in the next patch.

Each binary file has a header in the following format:


struct bnx2x_fw_file_section {
	__be32 len;
	__be32 offset;
}

struct bnx2x_fw_file_hdr {
	struct bnx2x_fw_file_section init_ops;
	struct bnx2x_fw_file_section init_ops_offsets;
	struct bnx2x_fw_file_section init_data;
	struct bnx2x_fw_file_section tsem_int_table_data;
	struct bnx2x_fw_file_section tsem_pram_data;
	struct bnx2x_fw_file_section usem_int_table_data;
	struct bnx2x_fw_file_section usem_pram_data;
	struct bnx2x_fw_file_section csem_int_table_data;
	struct bnx2x_fw_file_section csem_pram_data;
	struct bnx2x_fw_file_section xsem_int_table_data;
	struct bnx2x_fw_file_section xsem_pram_data;
	struct bnx2x_fw_file_section fw_version;
}

Each bnx2x_fw_file_section contains the length and the offset of the appropriate
section in the binary file. Values are stored in the big endian format.

Data types of arrays:

init_data            __be32
init_ops_offsets     __be16
XXsem_pram_data         u8
XXsem_int_table_data    u8
init_ops             struct raw_op {
                          u8   op;
			__be24 offset;
                        __be32 data;
		     }
fw_version              u8

>From now boundaries of a specific initialization stage are stored in
init_ops_offsets array instead of being defined by separate macroes. The index 
in init_ops_offsets is calculated by BLOCK_OPS_IDX macro:

#define BLOCK_OPS_IDX(block, stage, end) \
       (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end))

Security:

In addition to sanity check of array boundaries bnx2x will check a FW version.
Additional checks might be added in the future.

Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-27 03:27:43 -07:00
Vladislav Zolotarov ec9323f417 bnx2x: FW 4.8.53.0
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-27 03:26:13 -07:00
Ken Kawasaki 99b28c4709 pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM
pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21 02:06:14 -07:00
Linus Torvalds 1e17d774db Merge git://git.infradead.org/~dwmw2/firmware-2.6
* git://git.infradead.org/~dwmw2/firmware-2.6:
  qla1280: Fix off-by-some error in firmware loading.
  Add README.AddingFirmware file. Basically telling people not to.
  firmware: Remove newly-added slicoss and sxg firmware images
  firmware/WHENCE: Add missing origin information for Ambassador atmsar11.fw
  ALSA: wavefront - Always use request_firmware()
  Remove fdump tool for av7110 firmware
  firmware: convert av7110 driver to request_firmware()
  Partially revert "V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card"
  Revert "fix modules_install via NFS"

Add-add conflicts in firmware/WHENCE fixed manually
2009-04-10 12:01:22 -07:00
David Woodhouse 0f8e5c298f Add README.AddingFirmware file. Basically telling people not to.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06 21:04:17 -07:00
David Woodhouse cec20f36d6 firmware: Remove newly-added slicoss and sxg firmware images
These are available elsewhere (for example in the linux-firmware.git
repository); they have no business being added to the kernel source
tree.

We are only putting stuff in the firmware/ directory of the kernel
source when it's extracted from long-standing drivers which used to
include it directly.

We didn't intend to open the floodgates to including megabytes of new
firmware which was previously being distributed separately.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06 21:04:05 -07:00
Linus Torvalds 3989203290 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  b44: Use kernel DMA addresses for the kernel DMA API
  forcedeth: Fix resume from hibernation regression.
  xfrm: fix fragmentation on inter family tunnels
  ibm_newemac: Fix dangerous struct assumption
  gigaset: documentation update
  gigaset: in file ops, check for device disconnect before anything else
  bas_gigaset: use tasklet_hi_schedule for timing critical tasklets
  net/802/fddi.c: add MODULE_LICENSE
  smsc911x: remove unused #include <linux/version.h>
  axnet_cs: fix phy_id detection for bogus Asix chip.
  bnx2: Use request_firmware()
  b44: Fix sizes passed to b44_sync_dma_desc_for_{device,cpu}()
  socket: use percpu_add() while updating sockets_in_use
  virtio_net: Set the mac config only when VIRITO_NET_F_MAC
  myri_sbus: use request_firmware
  e1000: fix loss of multicast packets
  vxge: should include tcp.h

Conflict in firmware/WHENCE (SCSI vs net firmware)
2009-04-06 18:05:43 -07:00
David Woodhouse 14fa86f7c7 firmware/WHENCE: Add missing origin information for Ambassador atmsar11.fw
Looks like we forgot to update WHENCE when we converted this driver.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06 17:06:51 -07:00
Takashi Iwai 7c7cae17e0 ALSA: wavefront - Always use request_firmware()
Always use request_firmware() for loading yss225_registers image.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06 14:38:43 -07:00
Jaswinder Singh 9137f05f7e firmware: convert av7110 driver to request_firmware()
Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06 14:34:12 -07:00
David Woodhouse 4528e42900 Partially revert "V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card"
This reverts a hunk of commit 4b29631db3
which seems to have been an accident, and which re-introduced a
previously fixed bug.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06 14:27:20 -07:00
David Woodhouse 556b0f58bb Revert "fix modules_install via NFS"
This reverts commit 8b249b6856.

This 'fix' is not necessary; we just need to undo the damage caused
accidentally by Igor/Mauro in 4b29631db3
("V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card")

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06 14:27:17 -07:00
Linus Torvalds 22eb5aa6c7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (74 commits)
  [SCSI] sg: fix q->queue_lock on scsi_error_handler path
  [SCSI] replace __inline with inline
  [SCSI] a2091: make 2 functions static
  [SCSI] a3000: make 2 functions static
  [SCSI] ses: #if 0 the unused ses_match_host()
  [SCSI] use kmem_cache_zalloc instead of kmem_cache_alloc/memset
  [SCSI] sg: fix iovec bugs introduced by the block layer conversion
  [SCSI] qlogicpti: use request_firmware
  [SCSI] advansys: use request_firmware
  [SCSI] qla1280: use request_firmware
  [SCSI] libiscsi: fix iscsi pool error path
  [SCSI] cxgb3i: call ddp release function directly
  [SCSI] cxgb3i: merge cxgb3i_ddp into cxgb3i module
  [SCSI] cxgb3i: close all tcp connections upon chip reset
  [SCSI] cxgb3i: re-read ddp settings information after chip reset
  [SCSI] cxgb3i: re-initialize ddp settings after chip reset
  [SCSI] cxgb3i: subscribe to error notification from cxgb3 driver
  [SCSI] aacraid driver update
  [SCSI] mptsas: remove unneeded check
  [SCSI] config: Make need for SCSI_CDROM clearer
  ...
2009-04-06 13:24:49 -07:00
Michael Chan 57579f7629 bnx2: Use request_firmware()
Based on original patch by Ben Hutchings <ben@decadent.org.uk> and
Bastian Blank <waldi@debian.org>, with the following main changes:

Separated the mips firmware and rv2p firmware into different files
to make it easier to update them separately.

Added some code to fixup the rv2p code with run-time information
such as PAGE_SIZE.

Update version to 2.0.0.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-04 16:51:14 -07:00
Jaswinder Singh Rajput cd36e9efaa myri_sbus: use request_firmware
Firmware blob looks like this...

        __be16 lanai4_data_size
        unsigned char lanai4_code[]

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-04 16:38:42 -07:00
Mithlesh Thukral ba0e1ebb7e Staging: sxg: slicoss: Specify the license for Sahara SXG and Slicoss drivers
Specify a license for the Alacritech Sahara (10Gbe) and SLICOSS (1GBE)
firmware files.

Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-03 14:54:38 -07:00
Mithlesh Thukral cda3b517a4 Staging: sxg: Add support to download the firmware using request_firmware()
Add support for downloading the firmware using kernel-builtin mechanism.
This will remove the need for the firmware files in the driver source code.

Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-03 14:53:14 -07:00
Lior Dotan a390c47939 Staging: slicoss: add binary firmware to firmware directory
Adds the firmware to the firmware directory in ihex format so it can be
installed when doing make firmware_install.

Also update the firmware location in the driver code so it can locate
the files in the right place.

This should conclude the move to request_firmware().

Signed-off-by: Lior Dotan <liodot@gmail.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-03 14:53:05 -07:00
Jaswinder Singh Rajput f894e74dc1 [SCSI] qlogicpti: use request_firmware
Firmware blob is little endian

Thanks to Stephen Rothwell for fixing typos

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:25:23 -05:00
Jaswinder Singh Rajput 989bb5f58c [SCSI] advansys: use request_firmware
Firmware blob looks like this...
        __le32 checksum
        unsigned char data[]

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:25:23 -05:00
Jaswinder Singh Rajput 1bfa11db71 [SCSI] qla1280: use request_firmware
Firmware blob is little endian looks like this...
        unsigned char  Version1
        unsigned char  Version2
        unsigned char  Version3
        unsigned char  Padding
        unsigned short start_address
	unsigned short data

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:24:42 -05:00
Jaswinder Singh Rajput 75bf758f90 smc91c92_cs: use request_firmware
Added osi_load_firmware() instead of copying same thing twice

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-30 20:25:13 +05:30
Jaswinder Singh Rajput 4b6ece97e0 3C359: use request_firmware
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-30 20:02:50 +05:30
Jaswinder Singh Rajput a7a5eb9d4e yam: use request_firmware
Added predef variable in add_mcs() to support predefined mcs data

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-30 19:27:07 +05:30
Divy Le Ray d9507a532a cxgb3: update FW
Update FW to 7.1

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:30:48 -07:00
Ben Hutchings b775a750c3 typhoon: Use request_firmware()
Based on a patch by Jaswinder Singh <jaswinder@infradead.org>.

Compile-tested only.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26 23:21:23 -08:00
Ben Hutchings 06e1f9ffa0 tehuti: Use request_firmware()
Firmware blob is little endian.

Compile-tested only.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26 23:20:56 -08:00
Chris Adams 7df5231660 ti_usb_3410_5052: add Multi-Tech firmware
Add the Multi-Tech cellular modem firmware to the TI USB serial driver.
This firmware was extracted from:

ftp://ftp.multitech.com/wireless/wireless_linux.zip

Firmware licence: "all firmware components are redistributable in binary
	form" per support@multitech.com
	Copyright (C) 2005 Multi-Tech Systems, Inc.

Signed-off-by: Chris Adams <cmadams@hiwaay.net>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12 16:37:01 -08:00
David S. Miller 7f46b1343f Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 2009-01-08 11:05:59 -08:00
Jaswinder Singh Rajput 9ac32e1bc0 firmware: convert e100 driver to request_firmware()
Thanks to David Woodhouse for help.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-07 12:59:17 -08:00
Sam Ravnborg 8b249b6856 fix modules_install via NFS
Rafael reported:

I get the following error from 'make modules_install' on my test boxes:

  HOSTCC  firmware/ihex2fw
/home/rafael/src/linux-2.6/firmware/ihex2fw.c:268: fatal error: opening dependency file firmware/.ihex2fw.d: Read-only file system
compilation terminated.
make[3]: *** [firmware/ihex2fw] Error 1
make[2]: *** [_modinst_post] Error 2
make[1]: *** [sub-make] Error 2
make: *** [all] Error 2

where the configuration is that the kernel is compiled on a build box
with 'make O=<destdir> -j5' and then <destdir> is mounted over NFS read-only by
each test box (full path to this directory is the same on the build box and on
the test boxes).  Then, I cd into <destdir>, run 'make modules_install' and get
the error above.

The issue turns out to be that we when we install firmware pick
up the list of firmware blobs from firmware/Makefile.
And this triggers the Makefile rules to update ihex2fw.

There were two solutions for this issue:
1) Move the list of firmware blobs to a separate file
2) Avoid ihex2fw rebuild by moving it to scripts

As I seriously beleive that the list of firmware blobs should be
done in a fundamental different way solution 2) was selected.

Reported-and-tested-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
2009-01-07 21:44:20 +01:00
Robert Millan 842ffabbf3 make firmware/dsp56k/bootstrap.asm buildable on a56
Make firmware/dsp56k/bootstrap.asm buildable on a56, the free Motorola
DSP56001 assembler (http://www.zdomain.com/a56.html).

Summary of changes:

  - Remove '<' and '>' candy (they specify explicit addressing modes,
    which a56 don't grok, but uses implicitly anyway).

  - Replace 'move' with 'movem' when accessing program memory.

  - Rename a few labels to avoid duplicates (which a56 can't handle).

Signed-off-by: Robert Millan <rmh@aybabtu.com>
Cc: Jaswinder Singh <jaswinder@infradead.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:29 -08:00
Linus Torvalds 15b0669072 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (44 commits)
  qlge: Fix sparse warnings for tx ring indexes.
  qlge: Fix sparse warning regarding rx buffer queues.
  qlge: Fix sparse endian warning in ql_hw_csum_setup().
  qlge: Fix sparse endian warning for inbound packet control block flags.
  qlge: Fix sparse warnings for byte swapping in qlge_ethool.c
  myri10ge: print MAC and serial number on probe failure
  pkt_sched: cls_u32: Fix locking in u32_change()
  iucv: fix cpu hotplug
  af_iucv: Free iucv path/socket in path_pending callback
  af_iucv: avoid left over IUCV connections from failing connects
  af_iucv: New error return codes for connect()
  net/ehea: bitops work on unsigned longs
  Revert "net: Fix for initial link state in 2.6.28"
  tcp: Kill extraneous SPLICE_F_NONBLOCK checks.
  tcp: don't mask EOF and socket errors on nonblocking splice receive
  dccp: Integrate the TFRC library with DCCP
  dccp: Clean up ccid.c after integration of CCID plugins
  dccp: Lockless integration of CCID congestion-control plugins
  qeth: get rid of extra argument after printk to dev_* conversion
  qeth: No large send using EDDP for HiperSockets.
  ...
2009-01-05 18:44:59 -08:00
Jaswinder Singh Rajput cfc3a44c3c starfire: use request_firmware()
Firmware blob is big endian

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 16:12:11 -08:00
Jaswinder Singh Rajput 077f849de4 firmware: convert tg3 driver to request_firmware()
Firmware blob looks like this...
        u8 firmware_major
        u8 firmware_minor
        u8 firmware_fix
        u8 pad
        __be32 start_address
        __be32 length (total, including BSS sections to be zeroed)
        data... (in __be32 words, which is native for the firmware)

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 16:11:25 -08:00