Граф коммитов

888 Коммитов

Автор SHA1 Сообщение Дата
Yu Liao 4f45c37ffd s390: cleanup timer API use
cleanup the s390's use of the timer API
- del_timer() contains timer_pending() condition
- mod_timer(timer, expires) is equivalent to:

	del_timer(timer);
	timer->expires = expires;
	add_timer(timer);

If the timer is inactive it will be activated, using add_timer() on
condition !timer_pending(&private->timer) is redundant.

Just cleanup, no logic change.

Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20220322030057.1243196-1-liaoyu15@huawei.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27 22:18:39 +02:00
Haowen Bai 081397d13f s390/tape: use bitwise instead of arithmetic operator for flags
This silences the following coccinelle warning:
drivers/s390/char/tape_34xx.c:360:38-39: WARNING: sum of probable bitmasks, consider |

Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Link: https://lore.kernel.org/r/1647334421-29989-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27 22:18:38 +02:00
Heiko Carstens d09a307fde s390/extable: move EX_TABLE define to asm-extable.h
Follow arm64 and riscv and move the EX_TABLE define to asm-extable.h
which is a lot less generic than the current linkage.h.

Also make sure that all files which contain EX_TABLE usages actually
include the new header file. This should make sure that the files
always compile and there won't be any random compile breakage due to
other header file dependencies.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08 00:33:00 +01:00
Alexander Gordeev 303fd988ed s390/maccess: fix semantics of memcpy_real() and its callers
There is a confusion with regard to the source address of
memcpy_real() and calling functions. While the declared
type for a source assumes a virtual address, in fact it
always called with physical address of the source.

This confusion led to bugs in copy_oldmem_kernel() and
copy_oldmem_user() functions, where __pa() macro applied
mistakenly to physical addresses. It does not lead to a
real issue, since virtual and physical addresses are
currently the same.

Fix both the bugs and memcpy_real() prototype by making
type of source address consistent to the function name
and the way it actually used.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-09 22:56:04 +01:00
Alexander Gordeev 628c66942e s390/sclp_sdias: fix sclp_sdias_copy() virtual vs physical address confusion
Due to historical reasons sclp_sdias_copy() misuses
the notion of physical vs virtual addresses difference.

Note: this does not fix a bug currently, since virtual
and physical addresses are identical.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06 23:31:29 +01:00
Heiko Carstens f36e7c9845 s390: remove invalid email address of Heiko Carstens
Remove my old invalid email address which can be found in a couple of
files. Instead of updating it, just remove my contact data completely
from source files.
We have git and other tools which allow to figure out who is responsible
for what with recent contact data.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06 23:31:29 +01:00
Linus Torvalds 342465f533 TTY/Serial driver updates for 5.17-rc1
Here is the big set of tty/serial driver updates for 5.17-rc1.
 
 Nothing major in here, just lots of good updates and fixes, including:
 	- more tty core cleanups from Jiri as well as mxser driver
 	  cleanups.  This is the majority of the core diffstat
 	- tty documentation updates from Jiri
 	- platform_get_irq() updates
 	- various serial driver updates for new features and hardware
 	- fifo usage for 8250 console, reducing cpu load a lot
 	- LED fix for keyboards, long-time bugfix that went through many
 	  revisions
 	- minor cleanups
 
 All have been in linux-next for a while with no reported problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYd7Q0g8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yn3FACgoFZEFY04TU+Cd9mrlRq/mazZm/IAniJfPxOF
 U0s57L5o1dlnmawh8mmV
 =HSOB
 -----END PGP SIGNATURE-----

Merge tag 'tty-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty/serial driver updates for 5.17-rc1.

  Nothing major in here, just lots of good updates and fixes, including:

   - more tty core cleanups from Jiri as well as mxser driver cleanups.
     This is the majority of the core diffstat

   - tty documentation updates from Jiri

   - platform_get_irq() updates

   - various serial driver updates for new features and hardware

   - fifo usage for 8250 console, reducing cpu load a lot

   - LED fix for keyboards, long-time bugfix that went through many
     revisions

   - minor cleanups

  All have been in linux-next for a while with no reported problems"

* tag 'tty-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
  serial: core: Keep mctrl register state and cached copy in sync
  serial: stm32: correct loop for dma error handling
  serial: stm32: fix flow control transfer in DMA mode
  serial: stm32: rework TX DMA state condition
  serial: stm32: move tx dma terminate DMA to shutdown
  serial: pl011: Drop redundant DTR/RTS preservation on close/open
  serial: pl011: Drop CR register reset on set_termios
  serial: pl010: Drop CR register reset on set_termios
  serial: liteuart: fix MODULE_ALIAS
  serial: 8250_bcm7271: Fix return error code in case of dma_alloc_coherent() failure
  Revert "serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2"
  tty: goldfish: Use platform_get_irq() to get the interrupt
  serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2
  tty: serial: meson: Drop the legacy compatible strings and clock code
  serial: pmac_zilog: Use platform_get_irq() to get the interrupt
  serial: bcm63xx: Use platform_get_irq() to get the interrupt
  serial: ar933x: Use platform_get_irq() to get the interrupt
  serial: vt8500: Use platform_get_irq() to get the interrupt
  serial: altera_jtaguart: Use platform_get_irq_optional() to get the interrupt
  serial: pxa: Use platform_get_irq() to get the interrupt
  ...
2022-01-12 11:21:52 -08:00
Greg Kroah-Hartman 1350f36d38 s390/sclp_sd: use default_groups in kobj_type
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field.  Move the sclp_sd sysfs code to use default_groups field which
has been the preferred way since commit aa30f47cf6 ("kobject: Add
support for default attribute groups to kobj_type") so that we can
soon get rid of the obsolete default_attrs field.

Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220106095252.3273905-1-gregkh@linuxfoundation.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-01-08 17:44:05 +01:00
Heiko Carstens b6b486ecef s390/sclp: fix memblock_phys_free() vs memblock_free() confusion
memblock_phys_free() is used on a virtual address. Fix this by using
memblock_free().

Note: this doesn't fix a bug currently, since virtual and physical
addresses are identical.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-16 19:58:06 +01:00
Heiko Carstens 97aa7468f6 s390/vmcp: use page_to_virt instead of page_to_phys
Fix wrong usage of page_to_phys/phys_to_page.

Note: this currently doesn't fix a real bug, since virtual addresses
are indentical to physical ones.

Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-06 14:42:25 +01:00
Jiri Slaby b68b914494 tty: the rest, stop using tty_schedule_flip()
Since commit a9c3f68f3c (tty: Fix low_latency BUG) in 2014,
tty_flip_buffer_push() is only a wrapper to tty_schedule_flip(). We are
going to remove the latter (as it is used less), so call the former in
the rest of the users.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@reisers.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20211122111648.30379-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25 18:35:23 +01:00
Qing Wang 4b9e04367a s390: replace snprintf in show functions with sysfs_emit
show() must not use snprintf() when formatting the value to be
returned to user space.

Fix the coccicheck warnings:
WARNING: use scnprintf or sprintf.

Use sysfs_emit instead of scnprintf or sprintf makes more sense.

Signed-off-by: Qing Wang <wangqing@vivo.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/1634280655-4908-1-git-send-email-wangqing@vivo.com
[hca@linux.ibm.com: fix indentation]
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-11-16 12:29:19 +01:00
Sven Schnelle 213fca9e23 s390/tape: fix timer initialization in tape_std_assign()
commit 9c6c273aa4 ("timer: Remove init_timer_on_stack() in favor
of timer_setup_on_stack()") changed the timer setup from
init_timer_on_stack(() to timer_setup(), but missed to change the
mod_timer() call. And while at it, use msecs_to_jiffies() instead
of the open coded timeout calculation.

Cc: stable@vger.kernel.org
Fixes: 9c6c273aa4 ("timer: Remove init_timer_on_stack() in favor of timer_setup_on_stack()")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-11-08 14:17:49 +01:00
Linus Torvalds 0b707e572a s390 updates for the 5.16 merge window
- Add support for ftrace with direct call and ftrace direct call samples.
 
 - Add support for kernel command lines longer than current 896 bytes and
   make its length configurable.
 
 - Add support for BEAR enhancement facility to improve last breaking
   event instruction tracking.
 
 - Add kprobes sanity checks and testcases to prevent kprobe in the mid
   of an instruction.
 
 - Allow concurrent access to /dev/hwc for the CPUMF users.
 
 - Various ftrace / jump label improvements.
 
 - Convert unwinder tests to KUnit.
 
 - Add s390_iommu_aperture kernel parameter to tweak the limits on
   concurrently usable DMA mappings.
 
 - Add ap.useirq AP module option which can be used to disable interrupt
   use.
 
 - Add add_disk() error handling support to block device drivers.
 
 - Drop arch specific and use generic implementation of strlcpy and strrchr.
 
 - Several __pa/__va usages fixes.
 
 - Various cio, crypto, pci, kernel doc and other small fixes and
   improvements all over the code.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmGFW6EACgkQjYWKoQLX
 FBg20Qf/UbohgnKnE6vxbbH3sNTlI2dk3Cw4z3IobcsZgqXAu6AFLgLQGLk/X07F
 DIyUdrgSgCzLIEKLqrLrFXIOMIK44zAGaurIltNt7IrnWWlA+/YVD+YeL2gHwccq
 wT7KXRcrVMZQ1z18djJQ45DpPUC8ErBdL6+P+ftHck90YGFZsfMA5S7jf8X1h08U
 IlqdPTmY8t4unKHWVpHbxx9b+xrUuV6KTEXADsllpMV2jQoTLdDECd3vmefYR6tR
 3lssgop1m/RzH5OCqvia5Sy2D5fOQObNWDMakwOkVMxOD43lmGCTHstzS2Uo2OFE
 QcY79lfZ5NrzKnenUdE5Fd0XJ9kSwQ==
 =k0Ab
 -----END PGP SIGNATURE-----

Merge tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

 - Add support for ftrace with direct call and ftrace direct call
   samples.

 - Add support for kernel command lines longer than current 896 bytes
   and make its length configurable.

 - Add support for BEAR enhancement facility to improve last breaking
   event instruction tracking.

 - Add kprobes sanity checks and testcases to prevent kprobe in the mid
   of an instruction.

 - Allow concurrent access to /dev/hwc for the CPUMF users.

 - Various ftrace / jump label improvements.

 - Convert unwinder tests to KUnit.

 - Add s390_iommu_aperture kernel parameter to tweak the limits on
   concurrently usable DMA mappings.

 - Add ap.useirq AP module option which can be used to disable interrupt
   use.

 - Add add_disk() error handling support to block device drivers.

 - Drop arch specific and use generic implementation of strlcpy and
   strrchr.

 - Several __pa/__va usages fixes.

 - Various cio, crypto, pci, kernel doc and other small fixes and
   improvements all over the code.

[ Merge fixup as per https://lore.kernel.org/all/YXAqZ%2FEszRisunQw@osiris/ ]

* tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (63 commits)
  s390: make command line configurable
  s390: support command lines longer than 896 bytes
  s390/kexec_file: move kernel image size check
  s390/pci: add s390_iommu_aperture kernel parameter
  s390/spinlock: remove incorrect kernel doc indicator
  s390/string: use generic strlcpy
  s390/string: use generic strrchr
  s390/ap: function rework based on compiler warning
  s390/cio: make ccw_device_dma_* more robust
  s390/vfio-ap: s390/crypto: fix all kernel-doc warnings
  s390/hmcdrv: fix kernel doc comments
  s390/ap: new module option ap.useirq
  s390/cpumf: Allow multiple processes to access /dev/hwc
  s390/bitops: return true/false (not 1/0) from bool functions
  s390: add support for BEAR enhancement facility
  s390: introduce nospec_uses_trampoline()
  s390: rename last_break to pgm_last_break
  s390/ptrace: add last_break member to pt_regs
  s390/sclp: sort out physical vs virtual pointers usage
  s390/setup: convert start and end initrd pointers to virtual
  ...
2021-11-06 14:48:06 -07:00
Mike Rapoport 3ecc68349b memblock: rename memblock_free to memblock_phys_free
Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical counterpart to memblock_phys_alloc().

The callers are updated with the below semantic patch:

    @@
    expression addr;
    expression size;
    @@
    - memblock_free(addr, size);
    + memblock_phys_free(addr, size);

Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06 13:30:41 -07:00
Mike Rapoport fa27717110 memblock: drop memblock_free_early_nid() and memblock_free_early()
memblock_free_early_nid() is unused and memblock_free_early() is an
alias for memblock_free().

Replace calls to memblock_free_early() with calls to memblock_free() and
remove memblock_free_early() and memblock_free_early_nid().

Link: https://lkml.kernel.org/r/20210930185031.18648-4-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06 13:30:41 -07:00
Heiko Carstens a4892f85c8 s390/hmcdrv: fix kernel doc comments
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-26 15:21:29 +02:00
Alexander Gordeev ada1da31ce s390/sclp: sort out physical vs virtual pointers usage
Provide physical addresses whenever the hardware interface
expects it or a 32-bit value used for tracking.

Variable sclp_early_sccb gets initialized in the decompressor
and points to an address in physcal memory. Yet, it is used
as virtual memory pointer and therefore should be converted.

Note, the other two __bootdata variables sclp_info_sccb and
sclp_info_sccb_valid contain plain data, but no pointers and
do need any special care.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-26 15:21:28 +02:00
Randy Dunlap bca2d0428e s390/sclp_vt220: fix unused function warning
When CONFIG_SCLP_VT220_TTY=y and CONFIG_SCLP_VT220_CONSOLE is not set:

../drivers/s390/char/sclp_vt220.c:771:13: warning: '__sclp_vt220_flush_buffer' defined but not used [-Wunused-function]
  771 | static void __sclp_vt220_flush_buffer(void)

so move this function inside the #ifdef block where it is used.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/r/20210927215647.11506-1-rdunlap@infradead.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-04 09:49:37 +02:00
Peter Oberparleiter 54235d5cfe s390/sclp_sd: fix warnings about missing parameter description
Fix these warnings that are reported when compiling with W=1:

  drivers/s390/char/sclp_sd.c:132: warning: Function parameter or member 'listener' not described in 'sclp_sd_listener_init'
  drivers/s390/char/sclp_sd.c:408: warning: Function parameter or member 'cookie' not described in 'sclp_sd_file_update_async'
  drivers/s390/char/sclp_sd.c:422: warning: Function parameter or member 'attr' not described in 'reload_store'
  drivers/s390/char/sclp_sd.c:422: warning: Function parameter or member 'buf' not described in 'reload_store'
  drivers/s390/char/sclp_sd.c:422: warning: Function parameter or member 'count' not described in 'reload_store'
  drivers/s390/char/sclp_sd.c:457: warning: Function parameter or member 'file' not described in 'data_read'
  drivers/s390/char/sclp_sd.c:457: warning: Function parameter or member 'attr' not described in 'data_read'

Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-04 09:49:36 +02:00
Alexander Egorenkov d76b14f397 s390/sclp: fix Secure-IPL facility detection
Prevent out-of-range access if the returned SCLP SCCB response is smaller
in size than the address of the Secure-IPL flag.

Fixes: c9896acc78 ("s390/ipl: Provide has_secure sysfs attribute")
Cc: stable@vger.kernel.org # 5.2+
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-09-15 14:29:21 +02:00
Linus Torvalds f154c80667 2nd batch of s390 updates for 5.15 merge window
- Fix topology update on cpu hotplug, so notifiers see expected masks. This bug
   was uncovered with SCHED_CORE support.
 
 - Fix stack unwinding so that the correct number of entries are omitted like
   expected by common code. This fixes KCSAN selftests.
 
 - Add kmemleak annotation to stack_alloc to avoid false positive kmemleak
   warnings.
 
 - Avoid layering violation in common I/O code and don't unregister subchannel
   from child-drivers.
 
 - Remove xpram device driver for which no real use case exists since the kernel
   is 64 bit only. Also all hypervisors got required support removed in the
   meantime, which means the xpram device driver is dead code.
 
 - Fix -ENODEV handling of clp_get_state in our PCI code.
 
 - Enable KFENCE in debug defconfig.
 
 - Cleanup hugetlbfs s390 specific Kconfig dependency.
 
 - Quite a lot of trivial fixes to get rid of "W=1" warnings, and and other
   simple cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmE56jEACgkQIg7DeRsp
 bsI1sQ/+L91zvpjlWGEPjZhQmFJgDufuObLWJlhwOSPsOlezzJTujNscoisTe6Wm
 hfS1I/GzGsgcY3695xgBLgkPS37nrDdDLAgM4CnajOOalEZjbHgH5gcPiCPHfPAD
 QkvVFv2PjCQnaPx81kEIeK6tMFkvi6IRhfwhtGTf1fwoKDyw4IQT1couBsiuAy3n
 28/7NqMidS4gbv5X/BLK1Ez4as9d3PoecNre1debRPOZcdxIjCVDy7OW5MotI3ol
 ENsOHtNJe/orIDCc+QbsEP2xZJZdbZ0D0Zr/RQ4KEue42wKtGLzp/ZuG+UfTPyyx
 vlEDgMRgPHAGnceEImcMwK0XQwOn05sm13jOkbmpIwhmiE46rksAPf3cGL4DjlBP
 3rznDXoLYELX2OAHz2G4jfbrqFWDxbh5rp1NMr8tELvJV5xbdsMC11QFQY28swod
 /sUE39fX+zynwHSSttq0PXtKX4gr/d5ZMDdlhjl7lxlOgwEwDodBL3/xL81+C0qx
 jkQWDsJ6OpZ7iJpGvxaCUhFjlgihdi2InZ942inRGo/A/EaM6/7diExLiyqfaab5
 WEQ2BOlITUey85Fiu2WxeeweRChUwu+XNQt+Nx4hDF454K51htU/GJCUBW5Z5qtN
 Dm+/DolXkPY+joR7xBLHNzivob3ShcsoFiZjoBpTc/Hd18dhSQg=
 =fpJz
 -----END PGP SIGNATURE-----

Merge tag 's390-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull more s390 updates from Heiko Carstens:
 "Except for the xpram device driver removal it is all about fixes and
  cleanups.

   - Fix topology update on cpu hotplug, so notifiers see expected
     masks. This bug was uncovered with SCHED_CORE support.

   - Fix stack unwinding so that the correct number of entries are
     omitted like expected by common code. This fixes KCSAN selftests.

   - Add kmemleak annotation to stack_alloc to avoid false positive
     kmemleak warnings.

   - Avoid layering violation in common I/O code and don't unregister
     subchannel from child-drivers.

   - Remove xpram device driver for which no real use case exists since
     the kernel is 64 bit only. Also all hypervisors got required
     support removed in the meantime, which means the xpram device
     driver is dead code.

   - Fix -ENODEV handling of clp_get_state in our PCI code.

   - Enable KFENCE in debug defconfig.

   - Cleanup hugetlbfs s390 specific Kconfig dependency.

   - Quite a lot of trivial fixes to get rid of "W=1" warnings, and and
     other simple cleanups"

* tag 's390-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  hugetlbfs: s390 is always 64bit
  s390/ftrace: remove incorrect __va usage
  s390/zcrypt: remove incorrect kernel doc indicators
  scsi: zfcp: fix kernel doc comments
  s390/sclp: add __nonstring annotation
  s390/hmcdrv_ftp: fix kernel doc comment
  s390: remove xpram device driver
  s390/pci: read clp_list_pci_req only once
  s390/pci: fix clp_get_state() handling of -ENODEV
  s390/cio: fix kernel doc comment
  s390/ctrlchar: fix kernel doc comment
  s390/con3270: use proper type for tasklet function
  s390/cpum_cf: move array from header to C file
  s390/mm: fix kernel doc comments
  s390/topology: fix topology information when calling cpu hotplug notifiers
  s390/unwind: use current_frame_address() to unwind current task
  s390/configs: enable CONFIG_KFENCE in debug_defconfig
  s390/entry: make oklabel within CHKSTG macro local
  s390: add kmemleak annotation in stack_alloc()
  s390/cio: dont unregister subchannel from child-drivers
2021-09-09 12:55:12 -07:00
Heiko Carstens ff8a58b0ae s390/sclp: add __nonstring annotation
Add __nonstring annotation, since the missing string termination for
id member of sclp_trace_entry is intended. This way we get rid of this
warning:

drivers/s390/char/sclp.c:84:9: warning: ‘strncpy’ output truncated before terminating nul copying 4 bytes from a string of the same length [-Wstringop-truncation]
   84 |         strncpy(e.id, id, sizeof(e.id));
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-09-08 14:23:31 +02:00
Heiko Carstens 7d665612dd s390/hmcdrv_ftp: fix kernel doc comment
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-09-07 13:38:42 +02:00
Heiko Carstens 7a928af413 s390/ctrlchar: fix kernel doc comment
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-09-07 13:38:42 +02:00
Heiko Carstens 44bead2545 s390/con3270: use proper type for tasklet function
Get rid of this warning:

drivers/s390/char/con3270.c:629:22: warning: cast between incompatible function types from ‘void (*)(struct raw3270_request *)’ to ‘void (*)(long unsigned int)’ [-Wcast-function-type]
  629 |                      (void (*)(unsigned long)) con3270_read_tasklet,
      |                      ^

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-09-07 13:38:42 +02:00
Linus Torvalds 7c314bdfb6 TTY / Serial patches for 5.15-rc1
Here is the "big" set of tty/serial driver patches for 5.15-rc1
 
 Nothing major in here at all, just some driver updates and more cleanups
 on old tty apis and code that needed it that includes:
 	- tty.h cleanup of things that didn't belong in it
 	- other tty cleanups by Jiri
 	- driver cleanups
 	- rs485 support added to amba-pl011 driver
 	- dts updates
 	- stm32 serial driver updates
 	- other minor fixes and driver updates
 
 All have been in linux-next for a while with no reported problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS9/lg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylZNwCggKViEViSGqJFIafAZZjmI3Nt6tUAoMkRlhcd
 n1MS3snS0Sq+7BdJs37M
 =GyxP
 -----END PGP SIGNATURE-----

Merge tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty / serial updates from Greg KH:
 "Here is the "big" set of tty/serial driver patches for 5.15-rc1

  Nothing major in here at all, just some driver updates and more
  cleanups on old tty apis and code that needed it that includes:

   - tty.h cleanup of things that didn't belong in it

   - other tty cleanups by Jiri

   - driver cleanups

   - rs485 support added to amba-pl011 driver

   - dts updates

   - stm32 serial driver updates

   - other minor fixes and driver updates

  All have been in linux-next for a while with no reported problems"

* tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (83 commits)
  tty: serial: uartlite: Use read_poll_timeout for a polling loop
  tty: serial: uartlite: Use constants in early_uartlite_putc
  tty: Fix data race between tiocsti() and flush_to_ldisc()
  serial: vt8500: Use of_device_get_match_data
  serial: tegra: Use of_device_get_match_data
  serial: 8250_ingenic: Use of_device_get_match_data
  tty: serial: linflexuart: Remove redundant check to simplify the code
  tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp
  tty: serial: fsl_lpuart: enable two stop bits for lpuart32
  tty: serial: fsl_lpuart: fix the wrong mapbase value
  mxser: use semi-colons instead of commas
  tty: moxa: use semi-colons instead of commas
  tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback
  tty: replace in_irq() with in_hardirq()
  serial: sh-sci: fix break handling for sysrq
  serial: stm32: use devm_platform_get_and_ioremap_resource()
  serial: stm32: use the defined variable to simplify code
  Revert "arm pl011 serial: support multi-irq request"
  tty: serial: samsung: Add Exynos850 SoC data
  tty: serial: samsung: Fix driver data macros style
  ...
2021-09-01 09:51:16 -07:00
Peter Oberparleiter 70aa5d3982 s390/sclp: add tracing of SCLP interactions
Add tracing of interactions between the SCLP base driver, firmware and
other drivers to support problem determination in case of SCLP-related
issues.

For that purpose this patch introduces two new s390dbf debug areas:

  - sclp: An abbreviated log of all common interactions
  - sclp_err: A full log of failed or abnormal interactions

Tracing of full SCCB contents can be enabled for the sclp area by
setting its debug level to maximum (6).

Overview of added trace events:

  * Firmware interaction:
    - SRV1: Service call about to be issued
    - SRV2: Service call was issued
    - INT:  Interrupt received

  * Driver interaction:
    - RQAD: Request was added
    - RQOK: Request success
    - RQAB: Request aborted
    - RQTM: Request timed out
    - REG:  Event listener registered
    - UREG: Event listener unregistered
    - EVNT: Event callback
    - STCG: State-change callback

  * Abnormal events:
    - TMO:  A timeout occurred
    - UNEX: Unexpected SCCB completion

  * Other (not traced at default level):
    - SYN1: Synchronous wait start
    - SYN2: Synchronous wait end

Since the SCLP interface is used by console drivers this patch also
moves s390dbf printks outside the critical section protected by debug
area locks to prevent a potential deadlock that would otherwise be
introduced between console_owner --> sclp_lock --> sclp_debug.lock.

Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25 11:03:35 +02:00
Alexander Egorenkov 7c0eaa78b9 s390/sclp: reserve memory occupied by sclp early buffer
The memory block occupied by the SCLP early buffer that is allocated
by the decompressor and then handed over to the decompressed kernel,
must be reserved to prevent it from being reused for other purposes.
This is necessary because the SCLP early buffer is still in use
during kernel initialization.

Fixes: f1d3c53237 ("s390/boot: move sclp early buffer from fixed address in asm to C")
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reported-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-08-18 10:01:29 +02:00
Sebastian Andrzej Siewior 52b6defae7 s390/sclp: replace deprecated CPU-hotplug functions
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().

Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20210803141621.780504-6-bigeasy@linutronix.de
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-05 14:10:53 +02:00
Jiri Slaby 9f90a4ddef tty: drop put_tty_driver
put_tty_driver() is an alias for tty_driver_kref_put(). There is no need
for two exported identical functions, therefore switch all users of
old put_tty_driver() to new tty_driver_kref_put() and remove the former
for good.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Cc: Jens Taprogge <jens.taprogge@taprogge.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Scott Branden <scott.branden@broadcom.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Lin <dtwlin@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Acked-by: Alex Elder <elder@linaro.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210723074317.32690-8-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-27 12:17:21 +02:00
Jiri Slaby 39b7b42be4 tty: stop using alloc_tty_driver
alloc_tty_driver was deprecated by tty_alloc_driver in commit
7f0bc6a68e (TTY: pass flags to alloc_tty_driver) in 2012.

I never got into eliminating alloc_tty_driver until now. So we still
have two functions for allocating drivers which might be confusing. So
get rid of alloc_tty_driver uses to eliminate it for good in the next
patch.

Note we need to switch return value checking as tty_alloc_driver uses
ERR_PTR. And flags are now a parameter of tty_alloc_driver.

Cc: Richard Henderson <rth@twiddle.net>(odd fixer:ALPHA PORT)
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Cc: Jens Taprogge <jens.taprogge@taprogge.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210723074317.32690-5-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-27 12:17:20 +02:00
Alexander Egorenkov e9e7870f90 s390/dump: introduce boot data 'oldmem_data'
The new boot data struct shall replace global variables OLDMEM_BASE and
OLDMEM_SIZE. It is initialized in the decompressor and passed
to the decompressed kernel. In comparison to the old solution, this one
doesn't access data at fixed physical addresses which will become important
when the decompressor becomes relocatable.

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-27 09:39:16 +02:00
Alexander Egorenkov f1d3c53237 s390/boot: move sclp early buffer from fixed address in asm to C
To make the decompressor relocatable, the early SCLP buffer with a fixed
address must be replaced with a relocatable C buffer of the according size
and alignment as required by SCLP.

Introduce a new function sclp_early_set_buffer() into the SCLP driver
which enables the decompressor to change the SCLP early buffer at any time.
This will be useful when the decompressor becomes fully relocatable and
might need to change the SCLP early buffer to one with an address < 2G
as required by SCLP because it was loaded at an address >= 2G.

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-27 09:39:15 +02:00
Alexander Egorenkov 0029b4d194 s390/sclp: use only one sclp early buffer to send commands
A buffer that can be used for communication with SCLP is required
to lie below 2GB memory address. Therefore, both sclp_info_sccb
and sclp_early_sccb must fulfill this requirement if passed directly
to the sclp_early_cmd() function. Instead, use only sclp_early_sccb
for communication with SCLP. This allows the buffer sclp_info_sccb
to be placed anywhere in the memory address space and, therefore,
simplifies the process of making the decompressor relocatable later on,
one thing less to relocate. And make sure that the length of the new unified
early SCLP buffer is no less than the length of the removed sclp_info_sccb
buffer which might be larger than the length of the sclp_early_sccb buffer.

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-27 09:39:13 +02:00
Gustavo A. R. Silva d4e81342ea s390: Fix fall-through warnings for Clang
Fix the following fallthrough warnings:

drivers/s390/net/ctcm_fsms.c:1457:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
drivers/s390/net/qeth_l3_main.c:437:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
drivers/s390/char/tape_char.c:374:4: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
arch/s390/kernel/uprobes.c:129:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]

Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-07-13 14:43:09 -05:00
Linus Torvalds c932ed0adb TTY / Serial patches for 5.14-rc1
Here is the big set of tty and serial driver patches for 5.14-rc1.
 
 A bit more than normal, but nothing major, lots of cleanups.  Highlights
 are:
 	- lots of tty api cleanups and mxser driver cleanups from Jiri
 	- build warning fixes
 	- various serial driver updates
 	- coding style cleanups
 	- various tty driver minor fixes and updates
 	- removal of broken and disable r3964 line discipline (finally!)
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYOM4qQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylKvQCfbh+OmTkDlDlDhSWlxuV05M1XTXoAoLUcLZru
 s5JCnwSZztQQLMDHj7Pd
 =Zupm
 -----END PGP SIGNATURE-----

Merge tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty / serial updates from Greg KH:
 "Here is the big set of tty and serial driver patches for 5.14-rc1.

  A bit more than normal, but nothing major, lots of cleanups.
  Highlights are:

   - lots of tty api cleanups and mxser driver cleanups from Jiri

   - build warning fixes

   - various serial driver updates

   - coding style cleanups

   - various tty driver minor fixes and updates

   - removal of broken and disable r3964 line discipline (finally!)

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (227 commits)
  serial: mvebu-uart: remove unused member nb from struct mvebu_uart
  arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART
  dt-bindings: mvebu-uart: fix documentation
  serial: mvebu-uart: correctly calculate minimal possible baudrate
  serial: mvebu-uart: do not allow changing baudrate when uartclk is not available
  serial: mvebu-uart: fix calculation of clock divisor
  tty: make linux/tty_flip.h self-contained
  serial: Prefer unsigned int to bare use of unsigned
  serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs
  serial: qcom_geni_serial: use DT aliases according to DT bindings
  Revert "tty: serial: Add UART driver for Cortina-Access platform"
  tty: serial: Add UART driver for Cortina-Access platform
  MAINTAINERS: add me back as mxser maintainer
  mxser: Documentation, fix typos
  mxser: Documentation, make the docs up-to-date
  mxser: Documentation, remove traces of callout device
  mxser: introduce mxser_16550A_or_MUST helper
  mxser: rename flags to old_speed in mxser_set_serial_info
  mxser: use port variable in mxser_set_serial_info
  mxser: access info->MCR under info->slock
  ...
2021-07-05 14:08:24 -07:00
Linus Torvalds 2bb919b62f s390 updates for the 5.14 merge window
- Rework inline asm to get rid of error prone "register asm" constructs,
   which are problematic especially when code instrumentation is enabled. In
   particular introduce and use register pair union to allocate even/odd
   register pairs. Unfortunately this breaks compatibility with older
   clang compilers and minimum clang version for s390 has been raised to 13.
   https://lore.kernel.org/linux-next/CAK7LNARuSmPCEy-ak0erPrPTgZdGVypBROFhtw+=3spoGoYsyw@mail.gmail.com/
 
 - Fix gcc 11 warnings, which triggered various minor reworks all over
   the code.
 
 - Add zstd kernel image compression support.
 
 - Rework boot CPU lowcore handling.
 
 - De-duplicate and move kernel memory layout setup logic earlier.
 
 - Few fixes in preparation for FORTIFY_SOURCE performing compile-time
   and run-time field bounds checking for mem functions.
 
 - Remove broken and unused power management support leftovers in s390
   drivers.
 
 - Disable stack-protector for decompressor and purgatory to fix buildroot
   build.
 
 - Fix vt220 sclp console name to match the char device name.
 
 - Enable HAVE_IOREMAP_PROT and add zpci_set_irq()/zpci_clear_irq() in
   zPCI code.
 
 - Remove some implausible WARN_ON_ONCEs and remove arch specific counter
   transaction call backs in favour of default transaction handling in
   perf code.
 
 - Extend/add new uevents for online/config/mode state changes of
   AP card / queue device in zcrypt.
 
 - Minor entry and ccwgroup code improvements.
 
 - Other small various fixes and improvements all over the code.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmDhuTEACgkQjYWKoQLX
 FBjVlggAgDFBkDjlyfvrm4xzmHi7BJMmhrTJIONsSz+3tcA4/u5kE+Hrdrqxm0Uh
 ZH4MXBxn4q4Fmoomhu5w5ZDe8o2ip0aN9fFNdsBoP8hurmQbL/IbdTnBETKMrKpV
 XpogU2G7p+2nQ0+9+o6PS/vWlZhI88NVh8dWyRd2+5/XdMycgLv2Qm7NpQoACVw1
 CbUvxP2PlpZ0wltLvNBKPg1xXMZa3GS0wbVUsS2jiWcr/3VzCqfTHenZJ/RadoE6
 axG99QXCbLDMsJgVQcXtlI8K6Z461fAwbNtWZWC+Uq7o5pYuUFW1dovMg9WWF+7T
 lFNqXyyNy5wwITRkvuzjlVTE8yzYYg==
 =ADZ4
 -----END PGP SIGNATURE-----

Merge tag 's390-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

 - Rework inline asm to get rid of error prone "register asm"
   constructs, which are problematic especially when code
   instrumentation is enabled.

   In particular introduce and use register pair union to allocate
   even/odd register pairs. Unfortunately this breaks compatibility with
   older clang compilers and minimum clang version for s390 has been
   raised to 13.

     https://lore.kernel.org/linux-next/CAK7LNARuSmPCEy-ak0erPrPTgZdGVypBROFhtw+=3spoGoYsyw@mail.gmail.com/

 - Fix gcc 11 warnings, which triggered various minor reworks all over
   the code.

 - Add zstd kernel image compression support.

 - Rework boot CPU lowcore handling.

 - De-duplicate and move kernel memory layout setup logic earlier.

 - Few fixes in preparation for FORTIFY_SOURCE performing compile-time
   and run-time field bounds checking for mem functions.

 - Remove broken and unused power management support leftovers in s390
   drivers.

 - Disable stack-protector for decompressor and purgatory to fix
   buildroot build.

 - Fix vt220 sclp console name to match the char device name.

 - Enable HAVE_IOREMAP_PROT and add zpci_set_irq()/zpci_clear_irq() in
   zPCI code.

 - Remove some implausible WARN_ON_ONCEs and remove arch specific
   counter transaction call backs in favour of default transaction
   handling in perf code.

 - Extend/add new uevents for online/config/mode state changes of AP
   card / queue device in zcrypt.

 - Minor entry and ccwgroup code improvements.

 - Other small various fixes and improvements all over the code.

* tag 's390-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (91 commits)
  s390/dasd: use register pair instead of register asm
  s390/qdio: get rid of register asm
  s390/ioasm: use symbolic names for asm operands
  s390/ioasm: get rid of register asm
  s390/cmf: get rid of register asm
  s390/lib,string: get rid of register asm
  s390/lib,uaccess: get rid of register asm
  s390/string: get rid of register asm
  s390/cmpxchg: use register pair instead of register asm
  s390/mm,pages-states: get rid of register asm
  s390/lib,xor: get rid of register asm
  s390/timex: get rid of register asm
  s390/hypfs: use register pair instead of register asm
  s390/zcrypt: Switch to flexible array member
  s390/speculation: Use statically initialized const for instructions
  virtio/s390: get rid of open-coded kvm hypercall
  s390/pci: add zpci_set_irq()/zpci_clear_irq()
  scripts/min-tool-version.sh: Raise minimum clang version to 13.0.0 for s390
  s390/ipl: use register pair instead of register asm
  s390/mem_detect: fix tprot() program check new psw handling
  ...
2021-07-04 12:17:38 -07:00
Andy Shevchenko f39650de68 kernel.h: split out panic and oops helpers
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out panic and
oops helpers.

There are several purposes of doing this:
- dropping dependency in bug.h
- dropping a loop by moving out panic_notifier.h
- unload kernel.h from something which has its own domain

At the same time convert users tree-wide to use new headers, although for
the time being include new header back to kernel.h to avoid twisted
indirected includes for existing users.

[akpm@linux-foundation.org: thread_info.h needs limits.h]
[andriy.shevchenko@linux.intel.com: ia64 fix]
  Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com

Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 11:06:04 -07:00
Zou Wei 87929cae88 s390/sclp: convert list_for_each to entry variant
convert list_for_each() to list_for_each_entry() where
applicable.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1623740220-15846-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-18 16:41:22 +02:00
Peter Oberparleiter 6b8ed17095 s390/vmlogrdr: Remove power management support
Power management support was removed for s390 with
commit 394216275c ("s390: remove broken hibernate / power management
support").

Remove leftover vmlogrdr-related power management code.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-18 16:41:21 +02:00
Peter Oberparleiter 2f7e52084e s390/sclp: Remove sclp base power management support
Power management support was removed for s390 with
commit 394216275c ("s390: remove broken hibernate / power management
support").

Remove leftover sclp base-related power management code. Note that we
keep the registration of the sclp platform driver since it is used to
externalize non-PM related attributes in sysfs.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-18 16:41:21 +02:00
Peter Oberparleiter 9b357ccddb s390/sclp: Remove quiesce power management support
Power management support was removed for s390 with
commit 394216275c ("s390: remove broken hibernate / power management
support").

Remove leftover sclp quiesce-related power management code.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-18 16:41:20 +02:00
Peter Oberparleiter fc8ebe820b s390/sclp: Remove memory hotplug power management support
Power management support was removed for s390 with
commit 394216275c ("s390: remove broken hibernate / power management
support").

Remove leftover sclp memory hotplug-related power management code.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-18 16:41:20 +02:00
Peter Oberparleiter 2f554d8b0a s390/sclp: Remove vt220 power management support
Power management support was removed for s390 with
commit 394216275c ("s390: remove broken hibernate / power management
support").

Remove leftover sclp vt220-related power management code.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-18 16:41:20 +02:00
Peter Oberparleiter 5602bf8a7b s390/sclp: Remove console power management support
Power management support was removed for s390 with
commit 394216275c ("s390: remove broken hibernate / power management
support").

Remove leftover sclp console-related power management code.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-18 16:41:20 +02:00
Peter Oberparleiter 21adcf11f6 s390/monwriter: Remove power management support
Power management support was removed for s390 with
commit 394216275c ("s390: remove broken hibernate / power management
support").

Remove leftover monwriter-related power management code.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-18 16:41:20 +02:00
Peter Oberparleiter 8e1eaf4d83 s390/monreader: Remove power management support
Power management support was removed for s390 with
commit 394216275c ("s390: remove broken hibernate / power management
support").

Remove leftover monreader-related power management code.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-18 16:41:20 +02:00
Valentin Vidic b7d91d230a s390/sclp_vt220: fix console name to match device
Console name reported in /proc/consoles:

  ttyS1                -W- (EC p  )    4:65

does not match the char device name:

  crw--w----    1 root     root        4,  65 May 17 12:18 /dev/ttysclp0

so debian-installer inside a QEMU s390x instance gets confused and fails
to start with the following error:

  steal-ctty: No such file or directory

Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Link: https://lore.kernel.org/r/20210427194010.9330-1-vvidic@valentin-vidic.from.hr
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-07 17:06:59 +02:00
Jiri Slaby 4fb266e197 tty: remove empty tty_operations::flush_buffer
tty_operations::flush_buffer is optional. If it doesn't exist, nothing
is called. So remove almost¹ empty flush_buffer implementations.

¹ capi had an useless pr_debug in it.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/r/20210505091928.22010-31-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13 18:29:11 +02:00