Граф коммитов

79 Коммитов

Автор SHA1 Сообщение Дата
Prarit Bhargava 00159a2013 ACPI / memhotplug: add parameter to disable memory hotplug
When booting a kexec/kdump kernel on a system that has specific memory
hotplug regions the boot will fail with warnings like:

 swapper/0: page allocation failure: order:9, mode:0x84d0
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-65.el7.x86_64 #1
 Hardware name: QCI QSSC-S4R/QSSC-S4R, BIOS QSSC-S4R.QCI.01.00.S013.032920111005 03/29/2011
  0000000000000000 ffff8800341bd8c8 ffffffff815bcc67 ffff8800341bd950
  ffffffff8113b1a0 ffff880036339b00 0000000000000009 00000000000084d0
  ffff8800341bd950 ffffffff815b87ee 0000000000000000 0000000000000200
 Call Trace:
  [<ffffffff815bcc67>] dump_stack+0x19/0x1b
  [<ffffffff8113b1a0>] warn_alloc_failed+0xf0/0x160
  [<ffffffff815b87ee>] ?  __alloc_pages_direct_compact+0xac/0x196
  [<ffffffff8113f14f>] __alloc_pages_nodemask+0x7ff/0xa00
  [<ffffffff815b417c>] vmemmap_alloc_block+0x62/0xba
  [<ffffffff815b41e9>] vmemmap_alloc_block_buf+0x15/0x3b
  [<ffffffff815b1ff6>] vmemmap_populate+0xb4/0x21b
  [<ffffffff815b461d>] sparse_mem_map_populate+0x27/0x35
  [<ffffffff815b400f>] sparse_add_one_section+0x7a/0x185
  [<ffffffff815a1e9f>] __add_pages+0xaf/0x240
  [<ffffffff81047359>] arch_add_memory+0x59/0xd0
  [<ffffffff815a21d9>] add_memory+0xb9/0x1b0
  [<ffffffff81333b9c>] acpi_memory_device_add+0x18d/0x26d
  [<ffffffff81309a01>] acpi_bus_device_attach+0x7d/0xcd
  [<ffffffff8132379d>] acpi_ns_walk_namespace+0xc8/0x17f
  [<ffffffff81309984>] ? acpi_bus_type_and_status+0x90/0x90
  [<ffffffff81309984>] ? acpi_bus_type_and_status+0x90/0x90
  [<ffffffff81323c8c>] acpi_walk_namespace+0x95/0xc5
  [<ffffffff8130a6d6>] acpi_bus_scan+0x8b/0x9d
  [<ffffffff81a2019a>] acpi_scan_init+0x63/0x160
  [<ffffffff81a1ffb5>] acpi_init+0x25d/0x2a6
  [<ffffffff81a1fd58>] ? acpi_sleep_proc_init+0x2a/0x2a
  [<ffffffff810020e2>] do_one_initcall+0xe2/0x190
  [<ffffffff819e20c4>] kernel_init_freeable+0x17c/0x207
  [<ffffffff819e18d0>] ? do_early_param+0x88/0x88
  [<ffffffff8159fea0>] ? rest_init+0x80/0x80
  [<ffffffff8159feae>] kernel_init+0xe/0x180
  [<ffffffff815cca2c>] ret_from_fork+0x7c/0xb0
  [<ffffffff8159fea0>] ? rest_init+0x80/0x80
 Mem-Info:
 Node 0 DMA per-cpu:
 CPU    0: hi:    0, btch:   1 usd:   0
 Node 0 DMA32 per-cpu:
 CPU    0: hi:   42, btch:   7 usd:   0
 active_anon:0 inactive_anon:0 isolated_anon:0
  active_file:0 inactive_file:0 isolated_file:0
  unevictable:0 dirty:0 writeback:0 unstable:0
  free:872 slab_reclaimable:13 slab_unreclaimable:1880
  mapped:0 shmem:0 pagetables:0 bounce:0
  free_cma:0

because the system has run out of memory at boot time.  This occurs
because of the following sequence in the boot:

Main kernel boots and sets E820 map.  The second kernel is booted with a
map generated by the kdump service using memmap= and memmap=exactmap.
These parameters are added to the kernel parameters of the kexec/kdump
kernel.   The kexec/kdump kernel has limited memory resources so as not
to severely impact the main kernel.

The system then panics and the kdump/kexec kernel boots (which is a
completely new kernel boot).  During this boot ACPI is initialized and the
kernel (as can be seen above) traverses the ACPI namespace and finds an
entry for a memory device to be hotadded.

ie)

  [<ffffffff815a1e9f>] __add_pages+0xaf/0x240
  [<ffffffff81047359>] arch_add_memory+0x59/0xd0
  [<ffffffff815a21d9>] add_memory+0xb9/0x1b0
  [<ffffffff81333b9c>] acpi_memory_device_add+0x18d/0x26d
  [<ffffffff81309a01>] acpi_bus_device_attach+0x7d/0xcd
  [<ffffffff8132379d>] acpi_ns_walk_namespace+0xc8/0x17f
  [<ffffffff81309984>] ? acpi_bus_type_and_status+0x90/0x90
  [<ffffffff81309984>] ? acpi_bus_type_and_status+0x90/0x90
  [<ffffffff81323c8c>] acpi_walk_namespace+0x95/0xc5
  [<ffffffff8130a6d6>] acpi_bus_scan+0x8b/0x9d
  [<ffffffff81a2019a>] acpi_scan_init+0x63/0x160
  [<ffffffff81a1ffb5>] acpi_init+0x25d/0x2a6

At this point the kernel adds page table information and the the kexec/kdump
kernel runs out of memory.

This can also be reproduced by using the memmap=exactmap and mem=X
parameters on the main kernel and booting.

This patchset resolves the problem by adding a kernel parameter,
acpi_no_memhotplug, to disable ACPI memory hotplug.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-16 01:43:49 +01:00
Rafael J. Wysocki 24dee1fc99 ACPI / bind: Pass struct acpi_device pointer to acpi_bind_one()
There is no reason to pass an ACPI handle to acpi_bind_one() instead
of a struct acpi_device pointer to the target device object, so
modify that function to take a struct acpi_device pointer as its
second argument and update all code depending on it accordingly.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Lan Tianyu <tianyu.lan@intel.com> # for USB/ACPI
2013-12-07 01:05:50 +01:00
Rafael J. Wysocki 5c2aae8355 Merge branch 'acpi-hotplug'
* acpi-hotplug:
  ACPI / memhotplug: Use defined marco METHOD_NAME__STA
  ACPI / hotplug: Use kobject_init_and_add() instead of _init() and _add()
  ACPI / hotplug: Don't set kobject parent pointer explicitly
  ACPI / hotplug: Set kobject name via kobject_add(), not kobject_set_name()
  hotplug, powerpc, x86: Remove cpu_hotplug_driver_lock()
  hotplug / x86: Disable ARCH_CPU_PROBE_RELEASE on x86
  hotplug / x86: Add hotplug lock to missing places
  hotplug / x86: Fix online state in cpu0 debug interface
2013-10-28 01:12:41 +01:00
Zhang Yanfei 16ff816d3b ACPI / memhotplug: Use defined marco METHOD_NAME__STA
We already have predefined marco for method name "_STA', so
using the marco instead of directly using the string.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-10 02:32:33 +02:00
Jianguo Wu 1bb25df0fd ACPI / mm: use NUMA_NO_NODE
Use more appropriate NUMA_NO_NODE instead of -1

Signed-off-by: Jianguo Wu <wujianguo@huawei.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-24 01:40:38 +02:00
Toshi Kani d19f503e22 ACPI / memhotplug: Fix a stale pointer in error path
device->driver_data needs to be cleared when releasing its data,
mem_device, in an error path of acpi_memory_device_add().

The function evaluates the _CRS of memory device objects, and fails
when it gets an unexpected resource or cannot allocate memory.  A
kernel crash or data corruption may occur when the kernel accesses
the stale pointer.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: 2.6.32+ <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-15 01:26:18 +02:00
Rafael J. Wysocki 242831eb15 Memory hotplug / ACPI: Simplify memory removal
Now that the memory offlining should be taken care of by the
companion device offlining code in acpi_scan_hot_remove(), the
ACPI memory hotplug driver doesn't need to offline it in
remove_memory() any more.  Moreover, since the return value of
remove_memory() is not used, it's better to make it be a void
function and trigger a BUG() if the memory scheduled for removal is
not offline.

Change the code in accordance with the above observations.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-06-01 21:37:10 +02:00
Rafael J. Wysocki e2ff39400d ACPI / memhotplug: Bind removable memory blocks to ACPI device nodes
During ACPI memory hotplug configuration bind memory blocks residing
in modules removable through the standard ACPI mechanism to struct
acpi_device objects associated with ACPI namespace objects
representing those modules.  Accordingly, unbind those memory blocks
from the struct acpi_device objects when the memory modules in
question are being removed.

When "offline" operation for devices representing memory blocks is
introduced, this will allow the ACPI core's device hot-remove code to
use it to carry out remove_memory() for those memory blocks and check
the results of that before it actually removes the modules holding
them from the system.

Since walk_memory_range() is used for accessing all memory blocks
corresponding to a given ACPI namespace object, it is exported from
memory_hotplug.c so that the code in acpi_memhotplug.c can use it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-12 14:14:38 +02:00
Yasuaki Ishimatsu fd4655c259 ACPI / memhotplug: Remove info->failed bit
acpi_memory_info has enabled bit and failed bit for controlling memory
hotplug. But we don't need to keep both bits.

The patch removes acpi_memory_info->failed bit.

Signed-off-by: yasuaki ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-25 00:36:25 +01:00
Yasuaki Ishimatsu bb49d82dd8 ACPI / memhotplug: set info->enabled for memory present at boot time
At http://marc.info/?l=linux-acpi&m=135769405622667&w=2 thread,
Toshi Kani mentioned as follows:

"I have a question about the change you made in commit 65479472 in
acpi_memhotplug.c.  This change seems to require that
acpi_memory_enable_device() calls add_memory() to add all memory ranges
represented by memory device objects at boot-time, and keep the results
be used for hot-remove.

If I understand it right, this add_memory() call fails with EEXIST at
boot-time since all memory ranges should have been added from EFI memory
table (or e820) already.  This results all memory ranges be marked as !
enabled & !failed.  I think this means that we cannot hot-delete any
memory ranges presented at boot-time since acpi_memory_remove_memory()
only calls remove_memory() when the enabled flag is set.  Is that
correct?"

Above mention is correct. Thus even if memory device supports hotplug,
memory presented at boot-time cannot be hot removed since the memory
device's acpi_memory_info->enabled is always 0.

This patch changes to set 1 to "acpi_memory_info->enabled" of memory
device presented at boot-time for hot removing the memory device.

Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-25 00:34:36 +01:00
Rafael J. Wysocki 0a34764411 ACPI / scan: Make memory hotplug driver use struct acpi_scan_handler
Make the ACPI memory hotplug driver use struct acpi_scan_handler
for representing the object used to set up ACPI memory hotplug
functionality and to remove hotplug memory ranges and data
structures used by the driver before unregistering ACPI device
nodes representing memory.  Register the new struct acpi_scan_handler
object with the help of acpi_scan_add_handler_with_hotplug() to allow
user space to manipulate the attributes of the memory hotplug
profile.

This results in a significant reduction of the drvier's code size
and removes some ACPI hotplug code duplication.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Tested-by: Toshi Kani <toshi.kani@hp.com>
2013-03-04 14:25:32 +01:00
Tang Chen 60a5a19e74 memory-hotplug: remove sysfs file of node
Introduce a new function try_offline_node() to remove sysfs file of node
when all memory sections of this node are removed.  If some memory
sections of this node are not removed, this function does nothing.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Wu Jianguo <wujianguo@huawei.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 17:50:13 -08:00
Rafael J. Wysocki 3757b94802 ACPI / hotplug: Fix concurrency issues and memory leaks
This changeset is aimed at fixing a few different but related
problems in the ACPI hotplug infrastructure.

First of all, since notify handlers may be run in parallel with
acpi_bus_scan(), acpi_bus_trim() and acpi_bus_hot_remove_device()
and some of them are installed for ACPI handles that have no struct
acpi_device objects attached (i.e. before those objects are created),
those notify handlers have to take acpi_scan_lock to prevent races
from taking place (e.g. a struct acpi_device is found to be present
for the given ACPI handle, but right after that it is removed by
acpi_bus_trim() running in parallel to the given notify handler).
Moreover, since some of them call acpi_bus_scan() and
acpi_bus_trim(), this leads to the conclusion that acpi_scan_lock
should be acquired by the callers of these two funtions rather by
these functions themselves.

For these reasons, make all notify handlers that can handle device
addition and eject events take acpi_scan_lock and remove the
acpi_scan_lock locking from acpi_bus_scan() and acpi_bus_trim().
Accordingly, update all of their users to make sure that they
are always called under acpi_scan_lock.

Furthermore, since eject operations are carried out asynchronously
with respect to the notify events that trigger them, with the help
of acpi_bus_hot_remove_device(), even if notify handlers take the
ACPI scan lock, it still is possible that, for example,
acpi_bus_trim() will run between acpi_bus_hot_remove_device() and
the notify handler that scheduled its execution and that
acpi_bus_trim() will remove the device node passed to
acpi_bus_hot_remove_device() for ejection.  In that case, the struct
acpi_device object obtained by acpi_bus_hot_remove_device() will be
invalid and not-so-funny things will ensue.  To protect agaist that,
make the users of acpi_bus_hot_remove_device() run get_device() on
ACPI device node objects that are about to be passed to it and make
acpi_bus_hot_remove_device() run put_device() on them and check if
their ACPI handles are not NULL (make acpi_device_unregister() clear
the device nodes' ACPI handles for that check to work).

Finally, observe that acpi_os_hotplug_execute() actually can fail,
in which case its caller ought to free memory allocated for the
context object to prevent leaks from happening.  It also needs to
run put_device() on the device node that it ran get_device() on
previously in that case.  Modify the code accordingly.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
2013-02-13 14:36:47 +01:00
Rafael J. Wysocki 51fac8388a ACPI: Remove useless type argument of driver .remove() operation
The second argument of ACPI driver .remove() operation is only used
by the ACPI processor driver and the value passed to that driver
through it is always available from the given struct acpi_device
object's removal_type field.  For this reason, the second ACPI driver
.remove() argument is in fact useless, so drop it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
2013-01-26 00:37:24 +01:00
Rafael J. Wysocki cc38e51913 Merge branch 'acpi-scan' into acpi-cleanup
The following commits depend on the 'acpi-scan' material.
2013-01-26 00:36:44 +01:00
Rafael J. Wysocki b8bd759acd ACPI / scan: Drop acpi_bus_add() and use acpi_bus_scan() instead
The only difference between acpi_bus_scan() and acpi_bus_add() is the
invocation of acpi_update_all_gpes() in the latter which in fact is
unnecessary, because acpi_update_all_gpes() has already been called
by acpi_scan_init() and the way it is implemented guarantees the next
invocations of it to do nothing.

For this reason, drop acpi_bus_add() and make all its callers use
acpi_bus_scan() directly instead of it.  Additionally, rearrange the
code in acpi_scan_init() slightly to improve the visibility of the
acpi_update_all_gpes() call in there.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
2013-01-19 01:27:35 +01:00
Yinghai Lu 5993c4670e ACPI: update ej_event interface to take acpi_device
Should use acpi_device pointer directly instead of use handle and
get the device pointer again later.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-15 13:24:59 +01:00
Liu Jinsong 8611ea5f5d ACPI / memhotplug: remove redundant logic of acpi memory hotadd
When memory hotadd, acpi_memory_enable_device has already been done
at drv->ops.add (acpi_memory_device_add), no need to do it again
at notify callback.

At acpi_memory_enable_device, acpi_memory_get_device_resources
is also a redundant action, since it has been done at drv->ops.add.

Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-03 13:10:21 +01:00
Rafael J. Wysocki 0cd6ac52b3 ACPI: Make acpi_bus_scan() and acpi_bus_add() take only one argument
The callers of acpi_bus_add() usually assume that if it has
succeeded, then a struct acpi_device object has been attached to
the handle passed as the first argument.  Unfortunately, however,
this assumption is wrong, because acpi_bus_scan(), and acpi_bus_add()
too as a result, may return a pointer to a different struct
acpi_device object on success (it may be an object corresponding to
one of the descendant ACPI nodes in the namespace scope below that
handle).

For this reason, the callers of acpi_bus_add() who care about
whether or not a struct acpi_device object has been created for
its first argument need to check that using acpi_bus_get_device()
anyway, so the second argument of acpi_bus_add() is not really
useful for them.  The same observation applies to acpi_bus_scan()
executed directly from acpi_scan_init().

Therefore modify the relevant callers of acpi_bus_add() to check the
existence of the struct acpi_device in question with the help of
acpi_bus_get_device() and drop the no longer necessary second
argument of acpi_bus_add().  Accordingly, modify acpi_scan_init() to
use acpi_bus_get_device() to get acpi_root and drop the no longer
needed second argument of acpi_bus_scan().

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-01-03 13:09:40 +01:00
Rafael J. Wysocki 636458de36 ACPI: Remove the arguments of acpi_bus_add() that are not used
Notice that acpi_bus_add() uses only 2 of its 4 arguments and
redefine its header to match the body.  Update all of its callers as
necessary and observe that this leads to quite a number of removed
lines of code (Linus will like that).

Add a kerneldoc comment documenting acpi_bus_add() and wonder how
its callers make wrong assumptions about the second argument (make
note to self to take care of that later).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-01-03 13:09:39 +01:00
Toshi Kani ab6c57099d ACPI: Update Memory hotplug error messages
Updated Memory hotplug error messages with acpi_handle_<level>(),
dev_<level>() and pr_<level>().  Added missing "\n".

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-21 23:20:22 +01:00
Wen Congyang 61d8eff144 ACPI / memhotplug: bind the memory device when the driver is being loaded
We had introduced acpi_hotmem_initialized to avoid strange add_memory fail
message.  But the memory device may not be used by the kernel, and the
device should be bound when the driver is being loaded.  Remove
acpi_hotmem_initialized to allow that the device can be bound when the
driver is being loaded.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-16 02:12:38 +01:00
Wen Congyang 6547947257 ACPI / memhotplug: don't allow to eject the memory device if it is being used
We eject the memory device even if it is in use.  It is very dangerous,
and it will cause the kernel to be panicked.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-16 02:10:37 +01:00
Wen Congyang e0b7b24dd9 ACPI / memhotplug: free memory device if acpi_memory_enable_device() failed
If acpi_memory_enable_device() fails, acpi_memory_enable_device() will
return a non-zero value, which means we fail to bind the memory device to
this driver.  So we should free memory device before
acpi_memory_device_add() returns.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-16 02:08:16 +01:00
Wen Congyang 386e52b955 ACPI / memhotplug: fix memory leak when memory device is unbound from acpi_memhotplug
We allocate memory to store acpi_memory_info, so we should free it before
freeing mem_device.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-16 02:06:06 +01:00
Wen Congyang 315bbae9c5 ACPI / memhotplug: deal with eject request in hotplug queue
The memory device can be removed by 2 ways:
 1. send eject request by SCI
 2. echo 1 >/sys/bus/pci/devices/PNP0C80:XX/eject

We handle the 1st case in the module acpi_memhotplug, and handle
the 2nd case in ACPI eject notification. This 2 events may happen
at the same time, so we may touch acpi_memory_device.res_list at
the same time. This patch reimplements memory-hotremove support
through an ACPI eject notification. Now the memory device is
offlined and hotremoved only in the function acpi_memory_device_remove()
which is protected by device_lock().

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-16 02:04:05 +01:00
Yasuaki Ishimatsu 19387b27e4 ACPI / memory-hotplug: add memory offline code to acpi_memory_device_remove()
The memory device can be removed by 2 ways:
 1. send eject request by SCI
 2. echo 1 >/sys/bus/pci/devices/PNP0C80:XX/eject

In the 1st case, acpi_memory_disable_device() will be called.
In the 2nd case, acpi_memory_device_remove() will be called.
acpi_memory_device_remove() will also be called when we unbind the
memory device from the driver acpi_memhotplug or a driver initialization
fails.

acpi_memory_disable_device() has already implemented a code which
offlines memory and releases acpi_memory_info struct. But
acpi_memory_device_remove() has not implemented it yet.

So the patch move offlining memory and releasing acpi_memory_info struct
codes to a new function acpi_memory_remove_memory(). And it is used by both
acpi_memory_device_remove() and acpi_memory_disable_device().

Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-16 01:56:01 +01:00
Wen Congyang 54c4c7db6c ACPI / memory-hotplug: call acpi_bus_trim() to remove memory device
The memory device has been ejected and powoffed, so we can call
acpi_bus_trim() to remove the memory device from acpi bus.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:22:27 +01:00
Toshi Kani b1f00de66f ACPI: Add _OST support for ACPI memory hotplug
Changed acpi_memory_device_notify() to call ACPI _OST method
when ACPI memory hotplug operation has completed.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 01:09:21 -04:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Lin Ming 2263576cfc ACPICA: Add post-order callback to acpi_walk_namespace
The existing interface only has a pre-order callback. This change
adds an additional parameter for a post-order callback which will
be more useful for bus scans. ACPICA BZ 779.

Also update the external calls to acpi_walk_namespace.

http://www.acpica.org/bugzilla/show_bug.cgi?id=779

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-11-24 21:31:10 -05:00
Len Brown 3b87bb640e Merge branch 'bjorn-start-stop-2.6.32' into release 2009-09-19 01:56:39 -04:00
Bob Moore 15b8dd53f5 ACPICA: Major update for acpi_get_object_info external interface
Completed a major update for the acpi_get_object_info external interface.
Changes include:
 - Support for variable, unlimited length HID, UID, and CID strings
 - Support Processor objects the same as Devices (HID,UID,CID,ADR,STA, etc.)
 - Call the _SxW power methods on behalf of a device object
 - Determine if a device is a PCI root bridge
 - Change the ACPI_BUFFER parameter to ACPI_DEVICE_INFO.
These changes will require an update to all callers of this interface.
See the ACPICA Programmer Reference for details.

Also, update all invocations of acpi_get_object_info interface

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27 10:17:15 -04:00
Zhao Yakui 5d2619fca7 ACPI: Ingore the memory block with zero block size in course of memory hotplug
If the memory block size is zero, ignore it and don't do the memory hotplug
flowchart. Otherwise it will complain the following warning message:
  >System RAM resource 0 - ffffffffffffffff cannot be added

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-02 12:25:12 -04:00
Zhao Yakui aa7b2b2e97 ACPI: Don't treat generic error as ACPI error code in acpi memory hotplug driver
Don't treat the generic error as ACPI error code. Otherwise when the generic
code is returned, it will complain the following warning messag:
   >ACPI Exception (acpi_memhotplug-0171): UNKNOWN_STATUS_CODE,
		Cannot get acpi bus device [20080609]
   >ACPI: Cannot find driver data
   > ACPI Error (utglobal-0127): Unknown exception code: 0xFFFFFFED [20080609]
   > Pid: 85, comm: kacpi_notify Not tainted 2.6.27.19-5-default #1
     Call Trace:
     [<ffffffff8020da29>] show_trace_log_lvl+0x41/0x58
     [<ffffffff8049a3da>] dump_stack+0x69/0x6f
    .....

At the same time when the generic error code is returned, the ACPI_EXCEPTION
is replaced by the printk.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-02 12:24:59 -04:00
Bjorn Helgaas 80f20fef6a ACPI: memory hotplug: remove .start() method
This patch folds the .start() method into .add().

The .start() method is called in two paths: boot-time device enumeration
and run-time node addition, currently via container_device_add().  In both
cases, .start() is called immediately after .add(), so there's no reason
to make them separate methods.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: Alex Chiang <achiang@hp.com>
CC: Yasunori Goto <y-goto@jp.fujitsu.com>
CC: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-25 12:16:33 -04:00
Nick Andrew c7060d9e9e trivial: Fix misspelling of "firmware" in acpi_memhotplug.c
Fix misspelling of "firmware" in acpi_memhotplug.c

It's spelled "firmware".

Signed-off-by: Nick Andrew <nick@nick-andrew.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-06 11:28:08 +01:00
Bjorn Helgaas 89595b8f28 ACPI: consolidate ACPI_*_COMPONENT definitions in acpi_drivers.h
Move all the component definitions for drivers to a single shared place,
include/acpi/acpi_drivers.h.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-07 21:44:37 -05:00
Len Brown 7674416db4 Merge branch 'ull' into test
Conflicts:
	drivers/acpi/bay.c
	drivers/acpi/dock.c
	drivers/ata/libata-acpi.c

Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22 23:33:29 -04:00
Len Brown 5f50ef453d Merge branch 'misc' into test 2008-10-22 23:28:38 -04:00
Lin Ming 55ac9a018f ACPI: replace ACPI_DEBUG_PRINT((ACPI_DB_ERROR, ...) with printk
ACPI_DB_ERROR and ACPI_DB_WARN were removed from ACPICA core.
So replace ACPI_DEBUG_PRINT((ACPI_DB_ERROR, ...) with printk(KERN_ERR PREFIX ...)
and ACPI_DEBUG_PRINT((ACPI_DB_WARN, ...) with printk(KERN_WARNING PREFIX ...)

We do not use ACPI_ERROR/ACPI_WARNING since they're not exported, see
-------------------------------------------------------------
commit 6468463abd
Author: Len Brown <len.brown@intel.com>
Date:   Mon Jun 26 23:41:38 2006 -0400

    ACPI: un-export ACPI_ERROR() -- use printk(KERN_ERR...)

    Signed-off-by: Len Brown <len.brown@intel.com>
-------------------------------------------------------------

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22 23:14:41 -04:00
Matthew Wilcox 27663c5855 ACPI: Change acpi_evaluate_integer to support 64-bit on 32-bit kernels
As of version 2.0, ACPI can return 64-bit integers.  The current
acpi_evaluate_integer only supports 64-bit integers on 64-bit platforms.
Change the argument to take a pointer to an acpi_integer so we support
64-bit integers on all platforms.

lenb: replaced use of "acpi_integer" with "unsigned long long"
lenb: fixed bug in acpi_thermal_trips_update()

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-11 02:47:33 -04:00
Pavel Machek db89b4f0db ACPI: catch calls of acpi_driver_data on pointer of wrong type
Catch attempts to use of acpi_driver_data on pointers of wrong type.

akpm: rewritten to use proper C typechecking and remove the
"function"-used-as-lvalue thing.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-10 18:05:53 -04:00
Thomas Renninger 1ba90e3a87 ACPI: autoload modules - Create __mod_acpi_device_table symbol for all ACPI drivers
modpost is going to use these to create e.g. acpi:ACPI0001
in modules.alias.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-23 13:56:42 -04:00
Bjorn Helgaas a0bd4ac498 ACPI: Remove duplicate definitions for _STA bits
No need to duplicate the existing definitions in include/acpi/actypes.h.

syntax only -- no functional change.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-25 14:17:39 -04:00
Len Brown 7cda93e008 ACPI: delete extra #defines in /drivers/acpi/ drivers
Cosmetic only.

Except in a single case, #define ACPI_*_DRIVER_NAME
were invoked 0 or 1 times.

Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-12 23:50:52 -05:00
Len Brown c2b6705b75 ACPI: fix acpi_driver.name usage
It was erroneously used as a description rather than a name.

ie. turn this:

lenb@se7525gp2:/sys> ls bus/acpi/drivers
ACPI AC Adapter Driver  ACPI Embedded Controller Driver  ACPI Power Resource Driver
ACPI Battery Driver     ACPI Fan Driver                  ACPI Processor Driver
ACPI Button Driver      ACPI PCI Interrupt Link Driver   ACPI Thermal Zone Driver
ACPI container driver   ACPI PCI Root Bridge Driver      hpet

into this:

lenb@se7525gp2:~> ls /sys/bus/acpi/drivers
ac  battery  button  container  ec  fan  hpet  pci_link  pci_root  power  processor  thermal

Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-12 23:33:40 -05:00
Len Brown f52fd66d2e ACPI: clean up ACPI_MODULE_NAME() use
cosmetic only

Make "module name" actually match the file name.
Invoke with ';' as leaving it off confuses Lindent and gcc doesn't care.
Fix indentation where Lindent did get confused.

Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-12 22:42:12 -05:00
Burman Yan 36bcbec7ce ACPI: replace kmalloc+memset with kzalloc
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-12-20 16:54:54 -05:00
Len Brown cece901481 Pull style into test branch
Conflicts:

	drivers/acpi/button.c
	drivers/acpi/ec.c
	drivers/acpi/osl.c
	drivers/acpi/sbs.c
2006-12-16 01:04:27 -05:00