Граф коммитов

39 Коммитов

Автор SHA1 Сообщение Дата
Martin Schwidefsky 118bd31bea s390/mm: add no-dat TLB flush optimization
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-07-25 06:55:30 +02:00
Farhan Ali 71cb1bf66e s390/sclp: Detect KSS facility
Let's detect the keyless subset facility.

Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-04-21 11:08:04 +02:00
Heiko Carstens f694bb3a36 s390/sclp: get rid of common response code handling
Get rid of common response code handling. Each command requires its
own response code handling anyway. Also the retry in case of -EBUSY
does not work and can be simply removed.

Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-08 14:13:21 +01:00
Heiko Carstens d5ab7a34f9 s390/sclp: make early sclp code readable
This patch

 - unifies the old sclp early code and the sclp early printk code, so
   they can use common functions

 - makes sure all sclp early functions and variables have the same
   "sclp_early" prefix

 - converts the sclp early printk code into readable code by using
   existing data structures instead of hard coded magic arrays

 - splits the early sclp code into two files: sclp_early.c and
   sclp_early_core.c. The core file contains everything that is
   required by the kernel decompressor and may not call functions not
   contained within the core file. Otherwise the result would be a
   link error.

 - changes interrupt handling to be completely synchronous. The old
   early sclp code had a small window which allowed to receive several
   interrupts instead of exactly the single expected interrupt. This
   did hide a subtle potential bug, which is fixed with this large
   rework.

 - contains a couple of small cleanups.

Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-08 14:13:19 +01:00
Heiko Carstens af51160ebd s390/smp: initialize cpu_present_mask in setup_arch
In order to be able to setup the cpu to node mappings early it is a
prerequisite to know which cpus are present. Therefore cpus must be
detected much earlier than before.

For sclp based cpu detection this requires yet another early sclp
call, since the system is not ready to use the regular interrupt and
memory allocations.

Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-12-07 07:23:07 +01:00
David Hildenbrand 2386145152 s390/sclp: detect storage-key facility
Let's correctly detect that facility.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10 12:07:30 +02:00
David Hildenbrand 9c375490fc s390/sclp: detect interlock-and-broadcast-suppression facility
Let's detect that facility.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10 12:07:24 +02:00
David Hildenbrand a0eb55e631 s390/sclp: detect PFMF interpretation facility
Let's detect that facility.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10 12:07:23 +02:00
David Hildenbrand 4a5c3e0827 s390/sclp: detect conditional-external-interception facility
Let's detect if we have that facility.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10 12:07:22 +02:00
David Hildenbrand 72cd82b9e9 s390/sclp: detect intervention bypass facility
Let's detect if we have the intervention bypass facility installed.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10 12:07:21 +02:00
David Hildenbrand 5236c751da s390/sclp: detect guest-storage-limit-suppression
Let's detect that facility.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10 12:07:20 +02:00
David Hildenbrand 09be9cb92b s390/sclp: detect cmma
Let's detect the Collaborative-memory-management-interpretation facility,
aka CMM assist, so we can correctly enable cmma later.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10 12:07:19 +02:00
David Hildenbrand b9e28897e6 s390/sclp: detect guest-PER enhancement
Let's detect that facility, so we can correctly handle its abscence.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10 12:07:18 +02:00
David Hildenbrand 4013ade3fb s390/sclp: detect 64-bit-SCAO facility
Let's correctly detect that facility, so we can correctly handle its
abscence later on.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10 12:07:17 +02:00
Alexander Yarygin 154fa27e6b s390/sclp: Add hmfai field
Let's add hypervisor-managed facility-apportionment indications field to
SCLP structs. KVM will use it to reduce maintenance cost of
Non-Hypervisor-Managed facility bits.

Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-05-09 13:33:59 +02:00
Guenther Hutzl 32e6b236d2 KVM: s390: consider system MHA for guest storage
Verify that the guest maximum storage address is below the MHA (maximum
host address) value allowed on the host.

Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com>
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
[adopt to match recent limit,size changes]

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-12-15 17:08:22 +01:00
David Hildenbrand 8dfd523f85 s390/sclp: introduce check for SIE
This patch adds a way to check if the SIE with zArchitecture support is
available.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-11-30 12:47:11 +01:00
Eugene (jno) Dvurechenski f7ba1d3426 s390/sclp: introduce checks for ESCA and HVS
Introduce sclp.has_hvs and sclp.has_esca to provide a way for kvm to check
whether the extended-SCA and the home-virtual-SCA facilities are available.

Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-11-30 12:47:06 +01:00
Sebastian Ott a313bdc531 s390/sclp: fix compile error
Fix this error when compiling with CONFIG_SMP=n and
CONFIG_DYNAMIC_DEBUG=y:

drivers/s390/char/sclp_early.c: In function 'sclp_read_info_early':
drivers/s390/char/sclp_early.c:87:19: error: 'EBUSY' undeclared (first use in this function)
   } while (rc == -EBUSY);
                   ^

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-07-01 09:34:38 +02:00
Martin Schwidefsky d08d94306e s390/smp: cleanup core vs. cpu in the SCLP interface
The SCLP interface to query, configure and deconfigure CPUs actually
operates on cores. For a machine without the multi-threading faciltiy
a CPU and a core are equivalent but starting with System z13 a core
can have multiple hardware threads, also referred to as logical CPUs.

To avoid confusion replace the word 'cpu' with 'core' in the SCLP
interface. Also replace MAX_CPU_ADDRESS with SCLP_MAX_CORES.
The core-id is an 8-bit field, the maximum thread id is in the range
0-31. The theoretical limit for the CPU address is therefore 8191.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-25 09:39:24 +02:00
David Hildenbrand 78335a30e0 s390/sclp: move sclp_facilities into "struct sclp"
Let's also move the facilities into the sclp struct, so we can avoid
another separate external variable.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-05-13 09:58:18 +02:00
David Hildenbrand 3a9f3fe69e s390/sclp: get rid of sclp_get_mtid() and sclp_get_mtid_max()
As all relevant sclp data is now directly accessible, let's move the
logic of these two functions to the single caller.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-05-13 09:58:17 +02:00
David Hildenbrand 37c5f6c86c s390/sclp: unify basic sclp access by exposing "struct sclp"
Let's unify basic access to sclp fields by storing the data in an external
struct in asm/sclp.h.

The values can now directly be accessed by other components, so there is
no need for most accessor functions and external variables anymore.

The mtid, mtid_max and facility part will be cleaned up separately.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-05-13 09:58:17 +02:00
Linus Torvalds b9085bcbf5 Fairly small update, but there are some interesting new features.
Common: Optional support for adding a small amount of polling on each HLT
 instruction executed in the guest (or equivalent for other architectures).
 This can improve latency up to 50% on some scenarios (e.g. O_DSYNC writes
 or TCP_RR netperf tests).  This also has to be enabled manually for now,
 but the plan is to auto-tune this in the future.
 
 ARM/ARM64: the highlights are support for GICv3 emulation and dirty page
 tracking
 
 s390: several optimizations and bugfixes.  Also a first: a feature
 exposed by KVM (UUID and long guest name in /proc/sysinfo) before
 it is available in IBM's hypervisor! :)
 
 MIPS: Bugfixes.
 
 x86: Support for PML (page modification logging, a new feature in
 Broadwell Xeons that speeds up dirty page tracking), nested virtualization
 improvements (nested APICv---a nice optimization), usual round of emulation
 fixes.  There is also a new option to reduce latency of the TSC deadline
 timer in the guest; this needs to be tuned manually.
 
 Some commits are common between this pull and Catalin's; I see you
 have already included his tree.
 
 ARM has other conflicts where functions are added in the same place
 by 3.19-rc and 3.20 patches.  These are not large though, and entirely
 within KVM.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJU28rkAAoJEL/70l94x66DXqQH/1TDOfJIjW7P2kb0Sw7Fy1wi
 cEX1KO/VFxAqc8R0E/0Wb55CXyPjQJM6xBXuFr5cUDaIjQ8ULSktL4pEwXyyv/s5
 DBDkN65mriry2w5VuEaRLVcuX9Wy+tqLQXWNkEySfyb4uhZChWWHvKEcgw5SqCyg
 NlpeHurYESIoNyov3jWqvBjr4OmaQENyv7t2c6q5ErIgG02V+iCux5QGbphM2IC9
 LFtPKxoqhfeB2xFxTOIt8HJiXrZNwflsTejIlCl/NSEiDVLLxxHCxK2tWK/tUXMn
 JfLD9ytXBWtNMwInvtFm4fPmDouv2VDyR0xnK2db+/axsJZnbxqjGu1um4Dqbak=
 =7gdx
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM update from Paolo Bonzini:
 "Fairly small update, but there are some interesting new features.

  Common:
     Optional support for adding a small amount of polling on each HLT
     instruction executed in the guest (or equivalent for other
     architectures).  This can improve latency up to 50% on some
     scenarios (e.g. O_DSYNC writes or TCP_RR netperf tests).  This
     also has to be enabled manually for now, but the plan is to
     auto-tune this in the future.

  ARM/ARM64:
     The highlights are support for GICv3 emulation and dirty page
     tracking

  s390:
     Several optimizations and bugfixes.  Also a first: a feature
     exposed by KVM (UUID and long guest name in /proc/sysinfo) before
     it is available in IBM's hypervisor! :)

  MIPS:
     Bugfixes.

  x86:
     Support for PML (page modification logging, a new feature in
     Broadwell Xeons that speeds up dirty page tracking), nested
     virtualization improvements (nested APICv---a nice optimization),
     usual round of emulation fixes.

     There is also a new option to reduce latency of the TSC deadline
     timer in the guest; this needs to be tuned manually.

     Some commits are common between this pull and Catalin's; I see you
     have already included his tree.

  Powerpc:
     Nothing yet.

     The KVM/PPC changes will come in through the PPC maintainers,
     because I haven't received them yet and I might end up being
     offline for some part of next week"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (130 commits)
  KVM: ia64: drop kvm.h from installed user headers
  KVM: x86: fix build with !CONFIG_SMP
  KVM: x86: emulate: correct page fault error code for NoWrite instructions
  KVM: Disable compat ioctl for s390
  KVM: s390: add cpu model support
  KVM: s390: use facilities and cpu_id per KVM
  KVM: s390/CPACF: Choose crypto control block format
  s390/kernel: Update /proc/sysinfo file with Extended Name and UUID
  KVM: s390: reenable LPP facility
  KVM: s390: floating irqs: fix user triggerable endless loop
  kvm: add halt_poll_ns module parameter
  kvm: remove KVM_MMIO_SIZE
  KVM: MIPS: Don't leak FPU/DSP to guest
  KVM: MIPS: Disable HTW while in guest
  KVM: nVMX: Enable nested posted interrupt processing
  KVM: nVMX: Enable nested virtual interrupt delivery
  KVM: nVMX: Enable nested apic register virtualization
  KVM: nVMX: Make nested control MSRs per-cpu
  KVM: nVMX: Enable nested virtualize x2apic mode
  KVM: nVMX: Prepare for using hardware MSR bitmap
  ...
2015-02-13 09:55:09 -08:00
David Hildenbrand d614be05c8 s390/sclp: introduce check for the SIGP Interpretation Facility
This patch introduces the infrastructure to check whether the SIGP
Interpretation Facility is installed on all VCPUs in the configuration.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-01-23 13:25:35 +01:00
Martin Schwidefsky 10ad34bc76 s390: add SMT support
The multi-threading facility is introduced with the z13 processor family.
This patch adds code to detect the multi-threading facility. With the
facility enabled each core will surface multiple hardware threads to the
system. Each hardware threads looks like a normal CPU to the operating
system with all its registers and properties.

The SCLP interface reports the SMT topology indirectly via the maximum
thread id. Each reported CPU in the result of a read-scp-information
is a core representing a number of hardware threads.

To reflect the reduced CPU capacity if two hardware threads run on a
single core the MT utilization counter set is used to normalize the
raw cputime obtained by the CPU timer deltas. This scaled cputime is
reported via the taskstats interface. The normal /proc/stat numbers
are based on the raw cputime and are not affected by the normalization.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-01-22 12:16:01 +01:00
Martin Schwidefsky ea61a579ab s390/sclp: reduce dependency on event type masks
The event type masks can change asynchronously. These changes are reported
by SCLP to the OS by state-change events which are retrieved with the read
event data command. The SCLP driver has a request queue, there is a window
where the read event data request has not completed yet but the SCLP console
drivers are trying to queue output requests. As the masks are not updated
yet the requests are discarded.

The simplest fix is to queue the console requests independent of the
event type masks and rely on SCLP to return with an error code if a
specific event type is not available.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-09-25 10:52:01 +02:00
Michael Mueller 570126d370 s390/sclp: add sclp_get_ibc function
The patch adds functionality to retrieve the IBC configuration
by means of function sclp_get_ibc().

Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-05-16 14:57:30 +02:00
Heiko Carstens 217a440683 KVM: s390/sclp: correctly set eca siif bit
Check if siif is available before setting.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-04-22 13:24:38 +02:00
Heiko Carstens cf813db0b4 s390/smp: limit number of cpus in possible cpu mask
Limit the number of bits to the maximum number of cpus a machine
can have.
possible_cpu_mask typically will have more bits set than a machine
may physically have. This results in wasted memory during per-cpu
memory allocations, if the possible mask contains more cpus than
physically possible for a given configuration.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-17 15:53:06 +01:00
Michael Holzheu 9499934f70 s390/sclp_early: Return correct HSA block count also for zero
Currently we return a negative block count if SCLP returns HSA block
count zero. The reason is that we subtract one for the header page.

So fix this and correctly return zero block count if SCLP returns zero.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-02-24 17:13:57 +01:00
Hendrik Brueckner 52733e0152 s390/sclp_early: Add function to detect sclp console capabilities
Add SCLP console detect functions to encapsulate detection of SCLP console
capabilities, for example, VT220 support.  Reuse the sclp_send/receive masks
that were stored by the most recent sclp_set_event_mask() call to prevent
unnecessary SCLP calls.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-12-16 14:37:49 +01:00
Hendrik Brueckner 5d5de1a068 s390/sclp_early: Pass sccb pointer to every *_detect() function
Add a sccb pointer parameter to *_detect() functions instead of accessing
the global sccb_early variable directly.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-12-16 14:37:48 +01:00
Hendrik Brueckner 56e57a84a7 s390/sclp_early: Replace early_read_info_sccb with sccb_early
Replace early_read_info_sccb and use sccb_early instead.
Also saves some memory.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-12-16 14:37:48 +01:00
Hendrik Brueckner 333cce91f3 s390/sclp_early: Get rid of sclp_early_read_info_sccb_valid
The early sclp detect functions gather the available SCLP facility
information. The sclp_early_read_info_sccb_valid indicates whether the
early sclp request was valid.  However, one external reference to it
checks for particular sclp facility bits and this should be sufficient.
Another occurance is in the sclp_get_ipl_info() function that is called
later.  Because all information are available at the early stage, save
the ipl information when detecting the sclp facilities.  Hence, no more
checks for sclp_early_read_info_sccb_valid are required.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-12-16 14:37:47 +01:00
Hendrik Brueckner 9e3ea19e35 s390/sclp: replace uninitialized early_event_mask_sccb variable with sccb_early
Commit "s390/sclp: Consolidate early sclp init calls to sclp_early_detect()"
(7b50da53f6) replaced the sclp_event_mask_early()
with sclp_set_event_mask().  The early_event_mask_sccb variable is no longer
initialized but is still used in sclp_has_linemode() and sclp_has_vt220().

Replace early_event_mask_sccb with the sccb_early variable in both
functions.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-12-02 15:31:07 +01:00
Michael Holzheu 7b50da53f6 s390/sclp: Consolidate early sclp init calls to sclp_early_detect()
The new function calls the old ones. The sclp_event_mask_early() is removed
and replaced by one invocation of sclp_set_event_mask(0, 0).

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-15 14:08:41 +01:00
Michael Holzheu acf6a004e6 s390/sclp: Move early code from sclp_cmd.c to sclp_early.c
The early SCLP driver code in sclp_cmd.c belongs to sclp_early.c
because it is independent from the 'normal' SCLP driver. So move
it to sclp_early.c

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-15 14:08:41 +01:00
Michael Holzheu e657d8fe2f s390/sclp: Determine HSA size dynamically for zfcpdump
Currently we have hardcoded the HSA size to 32 MiB. With this patch the
HSA size is determined dynamically via SCLP in early.c.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-15 14:08:40 +01:00