Граф коммитов

22 Коммитов

Автор SHA1 Сообщение Дата
David Sterba 1a9fd4172d btrfs: fix typos in comments
Fix typos that have snuck in since the last round. Found by codespell.

Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-22 14:11:57 +02:00
Nikolay Borisov b762d1d08d btrfs: fix parameter description of btrfs_inode_rsv_release/btrfs_delalloc_release_space
Fixes following warnings:

fs/btrfs/delalloc-space.c:205: warning: Function parameter or member 'inode' not described in 'btrfs_inode_rsv_release'
fs/btrfs/delalloc-space.c:205: warning: Function parameter or member 'qgroup_free' not described in 'btrfs_inode_rsv_release'
fs/btrfs/delalloc-space.c:472: warning: Function parameter or member 'reserved' not described in 'btrfs_delalloc_release_space'
fs/btrfs/delalloc-space.c:472: warning: Function parameter or member 'qgroup_free' not described in 'btrfs_delalloc_release_space'
fs/btrfs/delalloc-space.c:472: warning: Excess function parameter 'release_bytes' description in 'btrfs_delalloc_release_space'

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-08 22:58:54 +01:00
Josef Bacik 8698fc4eb7 btrfs: add btrfs_reserve_data_bytes and use it
Create a new function btrfs_reserve_data_bytes() in order to handle data
reservations.  This uses the new flush types and flush states to handle
making data reservations.

This patch specifically does not change any functionality, and is
purposefully not cleaned up in order to make bisection easier for the
future patches.  The new helper is identical to the old helper in how it
handles data reservations.  We first try to force a chunk allocation,
and then we run through the flush states all at once and in the same
order that they were done with the old helper.

Subsequent patches will clean this up and change the behavior of the
flushing, and it is important to keep those changes separate so we can
easily bisect down to the patch that caused the regression, rather than
the patch that made us start using the new infrastructure.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:06:52 +02:00
Josef Bacik 39753e4a3a btrfs: use the btrfs_space_info_free_bytes_may_use helper for delalloc
We are going to use the ticket infrastructure for data, so use the
btrfs_space_info_free_bytes_may_use() helper in
btrfs_free_reserved_data_space_noquota() so we get the
btrfs_try_granting_tickets call when we free our reservation.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:06:52 +02:00
Nikolay Borisov e5b7231e20 btrfs: make btrfs_delalloc_reserve_space take btrfs_inode
All of its children take btrfs_inode so bubble up this requirement to
btrfs_delalloc_reserve_space's interface and stop calling BTRFS_I
internally.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-27 12:55:36 +02:00
Nikolay Borisov 36ea6f3e93 btrfs: make btrfs_check_data_free_space take btrfs_inode
Instead of calling BTRFS_I on the passed vfs_inode take btrfs_inode
directly.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-27 12:55:36 +02:00
Nikolay Borisov 86d52921a2 btrfs: make btrfs_delalloc_release_space take btrfs_inode
It needs btrfs_inode so take it as a parameter directly.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-27 12:55:36 +02:00
Nikolay Borisov 25ce28caaa btrfs: make btrfs_free_reserved_data_space take btrfs_inode
It only uses btrfs_inode internally so take it as a parameter.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-27 12:55:36 +02:00
Nikolay Borisov 9db5d510ac btrfs: make btrfs_free_reserved_data_space_noquota take btrfs_fs_info
No point in taking an inode only to get btrfs_fs_info from it, instead
take btrfs_fs_info directly.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-27 12:55:35 +02:00
Nikolay Borisov 7661a3e033 btrfs: make btrfs_qgroup_reserve_data take btrfs_inode
There's only a single use of vfs_inode in a tracepoint so let's take
btrfs_inode directly.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-27 12:55:35 +02:00
Nikolay Borisov 8b8a979f1f btrfs: make btrfs_qgroup_free_data take btrfs_inode
It passes btrfs_inode to its callee so change the interface.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-27 12:55:30 +02:00
Filipe Manana 46d4dac888 btrfs: remove the start argument from btrfs_free_reserved_data_space_noquota()
The start argument for btrfs_free_reserved_data_space_noquota() is only
used to make sure the amount of bytes we decrement from the bytes_may_use
counter of the data space_info object is aligned to the filesystem's
sector size. It serves no other purpose.

All its current callers always pass a length argument that is already
aligned to the sector size, so we can make the start argument go away.
In fact its presence makes it impossible to use it in a context where we
just want to free a number of bytes for a range for which either we do
not know its start offset or for freeing multiple ranges at once (which
are not contiguous).

This change is preparatory work for a patch (third patch in this series)
that makes relocation of data block groups that are not full reserve less
data space.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-27 12:55:21 +02:00
Nikolay Borisov 63f018be57 btrfs: Remove __ prefix from btrfs_block_rsv_release
Currently the non-prefixed version is a simple wrapper used to hide
the 4th argument of the prefixed version. This doesn't bring much value
in practice and only makes the code harder to follow by adding another
level of indirection. Rectify this by removing the __ prefix and
have only one public function to release bytes from a block reservation.
No semantic changes.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23 17:01:55 +01:00
Josef Bacik 6f4ad559ea btrfs: add a comment describing delalloc space reservation
delalloc space reservation is tricky because it encompasses both data
and metadata.  Make it clear what each side does, the general flow of
how space is moved throughout the lifetime of a write, and what goes
into the calculations.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23 17:01:27 +01:00
Filipe Manana 16ad3be175 Btrfs: remove unnecessary delalloc mutex for inodes
The inode delalloc mutex was added a long time ago by commit f248679e86
("Btrfs: add a delalloc mutex to inodes for delalloc reservations"), and
the reason for its introduction is not very clear from the change log. It
claims it solves bogus warnings from lockdep, however it lacks an example
report/warning from lockdep, or any explanation.

Since we have enough concurrentcy protection from the locks of the space
info and block reserve objects, and such lockdep warnings don't seem to
exist anymore (at least on a 5.3 kernel I couldn't get them with fstests,
ltp, fs_mark, etc), remove it, simplifying things a bit and decreasing
the size of the btrfs_inode structure. With some quick fio tests doing
direct IO and mmap writes I couldn't observe any significant performance
increase either (direct IO writes that don't increase the file's size
don't hold the inode's lock for their entire duration and mmap writes
don't hold the inode's lock at all), which are the only type of writes
that could see any performance gain due to less serialization.

Review feedback from Josef:

The problem was taking the i_mutex in mmap, which is how I was
protecting delalloc reservations originally.  The delalloc mutex didn't
come with all of the other dependencies.  That's what the lockdep
messages were about, removing the lock isn't going to make them appear
again.

We _had_ to lock around this because we used to do tricks to keep from
over-reserving, and if we didn't serialize delalloc reservations we'd
end up with ugly accounting problems when we tried to clean things up.

However with my recentish changes this isn't the case anymore.  Every
operation is responsible for reserving its space, and then adding it to
the inode.  Then cleaning up is straightforward and can't be mucked up
by other users.  So we no longer need the delalloc mutex to safe us from
ourselves.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18 17:51:46 +01:00
Filipe Manana c7967fc149 Btrfs: fix qgroup double free after failure to reserve metadata for delalloc
If we fail to reserve metadata for delalloc operations we end up releasing
the previously reserved qgroup amount twice, once explicitly under the
'out_qgroup' label by calling btrfs_qgroup_free_meta_prealloc() and once
again, under label 'out_fail', by calling btrfs_inode_rsv_release() with a
value of 'true' for its 'qgroup_free' argument, which results in
btrfs_qgroup_free_meta_prealloc() being called again, so we end up having
a double free.

Also if we fail to reserve the necessary qgroup amount, we jump to the
label 'out_fail', which calls btrfs_inode_rsv_release() and that in turns
calls btrfs_qgroup_free_meta_prealloc(), even though we weren't able to
reserve any qgroup amount. So we freed some amount we never reserved.

So fix this by removing the call to btrfs_inode_rsv_release() in the
failure path, since it's not necessary at all as we haven't changed the
inode's block reserve in any way at this point.

Fixes: c8eaeac7b7 ("btrfs: reserve delalloc metadata differently")
CC: stable@vger.kernel.org # 5.2+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-10-17 20:13:44 +02:00
Qu Wenruo 8702ba9396 btrfs: qgroup: Always free PREALLOC META reserve in btrfs_delalloc_release_extents()
[Background]
Btrfs qgroup uses two types of reserved space for METADATA space,
PERTRANS and PREALLOC.

PERTRANS is metadata space reserved for each transaction started by
btrfs_start_transaction().
While PREALLOC is for delalloc, where we reserve space before joining a
transaction, and finally it will be converted to PERTRANS after the
writeback is done.

[Inconsistency]
However there is inconsistency in how we handle PREALLOC metadata space.

The most obvious one is:
In btrfs_buffered_write():
	btrfs_delalloc_release_extents(BTRFS_I(inode), reserve_bytes, true);

We always free qgroup PREALLOC meta space.

While in btrfs_truncate_block():
	btrfs_delalloc_release_extents(BTRFS_I(inode), blocksize, (ret != 0));

We only free qgroup PREALLOC meta space when something went wrong.

[The Correct Behavior]
The correct behavior should be the one in btrfs_buffered_write(), we
should always free PREALLOC metadata space.

The reason is, the btrfs_delalloc_* mechanism works by:
- Reserve metadata first, even it's not necessary
  In btrfs_delalloc_reserve_metadata()

- Free the unused metadata space
  Normally in:
  btrfs_delalloc_release_extents()
  |- btrfs_inode_rsv_release()
     Here we do calculation on whether we should release or not.

E.g. for 64K buffered write, the metadata rsv works like:

/* The first page */
reserve_meta:	num_bytes=calc_inode_reservations()
free_meta:	num_bytes=0
total:		num_bytes=calc_inode_reservations()
/* The first page caused one outstanding extent, thus needs metadata
   rsv */

/* The 2nd page */
reserve_meta:	num_bytes=calc_inode_reservations()
free_meta:	num_bytes=calc_inode_reservations()
total:		not changed
/* The 2nd page doesn't cause new outstanding extent, needs no new meta
   rsv, so we free what we have reserved */

/* The 3rd~16th pages */
reserve_meta:	num_bytes=calc_inode_reservations()
free_meta:	num_bytes=calc_inode_reservations()
total:		not changed (still space for one outstanding extent)

This means, if btrfs_delalloc_release_extents() determines to free some
space, then those space should be freed NOW.
So for qgroup, we should call btrfs_qgroup_free_meta_prealloc() other
than btrfs_qgroup_convert_reserved_meta().

The good news is:
- The callers are not that hot
  The hottest caller is in btrfs_buffered_write(), which is already
  fixed by commit 336a8bb8e3 ("btrfs: Fix wrong
  btrfs_delalloc_release_extents parameter"). Thus it's not that
  easy to cause false EDQUOT.

- The trans commit in advance for qgroup would hide the bug
  Since commit f5fef45936 ("btrfs: qgroup: Make qgroup async transaction
  commit more aggressive"), when btrfs qgroup metadata free space is slow,
  it will try to commit transaction and free the wrongly converted
  PERTRANS space, so it's not that easy to hit such bug.

[FIX]
So to fix the problem, remove the @qgroup_free parameter for
btrfs_delalloc_release_extents(), and always pass true to
btrfs_inode_rsv_release().

Reported-by: Filipe Manana <fdmanana@suse.com>
Fixes: 43b18595d6 ("btrfs: qgroup: Use separate meta reservation type for delalloc")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-10-15 18:50:07 +02:00
Josef Bacik f3e75e3805 btrfs: roll tracepoint into btrfs_space_info_update helper
We duplicate this tracepoint everywhere we call these helpers, so update
the helper to have the tracepoint as well.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-09-09 14:59:17 +02:00
Josef Bacik bcacf5f3f9 btrfs: only reserve metadata_size for inodes
Historically we reserved worst case for every btree operation, and
generally speaking we want to do that in cases where it could be the
worst case.  However for updating inodes we know the inode items are
already in the tree, so it will only be an update operation and never an
insert operation.  This allows us to always reserve only the
metadata_size amount for inode updates rather than the
insert_metadata_size amount.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-09-09 14:59:13 +02:00
Josef Bacik 2bd36e7b4f btrfs: rename the btrfs_calc_*_metadata_size helpers
btrfs_calc_trunc_metadata_size differs from trans_metadata_size in that
it doesn't take into account any splitting at the levels, because
truncate will never split nodes.  However truncate _and_ changing will
never split nodes, so rename btrfs_calc_trunc_metadata_size to
btrfs_calc_metadata_size.  Also btrfs_calc_trans_metadata_size is purely
for inserting items, so rename this to btrfs_calc_insert_metadata_size.
Making these clearer will help when I start using them differently in
upcoming patches.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-09-09 14:59:13 +02:00
Josef Bacik 07730d87ac btrfs: migrate the chunk allocation code
This feels more at home in block-group.c than in extent-tree.c.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>i
[ refresh ]
Signed-off-by: David Sterba <dsterba@suse.com>
2019-09-09 14:59:09 +02:00
Josef Bacik 867363429d btrfs: migrate the delalloc space stuff to it's own home
We have code for data and metadata reservations for delalloc.  There's
quite a bit of code here, and it's used in a lot of places so I've
separated it out to it's own file.  inode.c and file.c are already
pretty large, and this code is complicated enough to live in its own
space.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-04 17:26:17 +02:00