Граф коммитов

46 Коммитов

Автор SHA1 Сообщение Дата
Pavel Hofman 841b23d4d7 [ALSA] some fixes and cleanup for ICE1724 cards
* removing the hack with NON_AKM ak4xxx type
* support for card-specific flags in ak4114_stats
* definition of the flags for corresponding cards

Signed-off-by: Pavel Hofman <dustin@seznam.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:25 +02:00
Pavel Hofman fdafad6fc2 [ALSA] AK4114 - listing regs in proc
A simple patch for listing AK4114 regs in proc.

Signed-off-by: Pavel Hofman <dustin@seznam.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:09 +02:00
Andy Shevchenko 69252128ec [ALSA] fm801 - Add mute support for FM-only card with FM801 PCI to tuner bridge
This is improvement of the early support of the FM-only cards where the
fm801 chip represents the PCI to tuner bridge.
The tuner initialization isn't included the mute on as well as mute support
via V4L request. Proposed patch should fix this at least for 64-PCR model.

Signed-off-by: Andy Shevchenko <andy@smile.org.ua>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:14 +01:00
Takashi Iwai 9004acc70e [ALSA] Remove sound/driver.h
This header file exists only for some hacks to adapt alsa-driver
tree.  It's useless for building in the kernel.  Let's move a few
lines in it to sound/core.h and remove it.
With this patch, sound/driver.h isn't removed but has just a single
compile warning to include it.  This should be really killed in
future.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:48 +01:00
Pavel Hofman 6632d64b0b [ALSA] switching rate in STAC9460 codec of Prodigy192
* support for switching rate in STAC9460 - using set_rate_val of the akm
infrastructure
* listing all STAC9460 registers in proc
* disabling mpu401 device for Prodigy192 - otherwise the currently
  flawed mpu401 code hangs kernel when opening the midi device
* removing old unused commented-out code

Signed-off-by: Pavel Hofman <dustin@seznam.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:30 +01:00
Takashi Iwai 3b89246778 [ALSA] Check value range in ctl callbacks
Check the value ranges in ctl put callbacks properly (in the rest drivers).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:25 +01:00
Takashi Iwai 02ff132493 [ALSA] ak4xxx - Check value ranges in ctl callbacks
Check the value ranges in ctl put callbacks properly in ak4xxx-adda driver.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:25 +01:00
Mauro Carvalho Chehab 22c4a4e98e V4L/DVB (6320): v4l core: remove the unused .hardware V4L1 field
struct video_device used to define a .hardware field. While
initialized on severl drivers, this field is never used inside V4L.
However, drivers using it need to include the old V4L1 header.

This seems to cause compilation troubles with some random configs.
Better just to remove it from all drivers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22 12:01:24 -02:00
Jaroslav Kysela c1017a4cdb [ALSA] Changed Jaroslav Kysela's e-mail from perex@suse.cz to perex@perex.cz
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 16:51:18 +02:00
Takashi Iwai 4eb4550ab3 [ALSA] Workaround for invalid signature read of CS8427
Reading the signature of CS8427 over SPI/I2C fails on some devices
by mysterious reason.  In most cases, however, it succeeds at the
sequential read.  So, let's give a second chance to check the signature
again.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:51:01 +02:00
Takashi Iwai 52a6db82ef [ALSA] Clean up Makefile
Clean up Makefile using xxx- style instead of
ifeq(CONFIG_XXX,y).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:05 +02:00
Takashi Iwai a5ce88909d [ALSA] Clean up with common snd_ctl_boolean_*_info callbacks
Clean up codes using the new common snd_ctl_boolean_*_info() callbacks.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:57:45 +02:00
Pavel Hofman ea7cfcdfe6 [ALSA] ice1724 - Add PCM Playback Switch to Revo 7.1
This patch adds the support of mute for front channels of M-Audio
Revolution 7.1 (the DAC AK4381 features a mute bit).

Signed-off-by: Pavel Hofman <dustin@seznam.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-07-20 11:11:18 +02:00
Pavel Hofman c4116ae717 [ALSA] Fix misc bugs in i2c/others/ak4114.c
* correct register for 'IEC958 Non-PCM Bitstream', 'IEC958 DTS Bitstream'
  to use AK4114_REG_RCS0
* correct check for control name: if (strstr(kctl->id.name, 'Playback'))
* correct check: if (!chip->init) in snd_ak4114_external_rate
* added PCM control 'IEC958 PPL Lock Status'

Signed-off-by: Pavel Hofman <dustin@seznam.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11 16:55:57 +02:00
Takashi Iwai 51354ae3b8 [ALSA] ak4114 - Fix possible Oops with callbacks
ak4114 code may trigger Oops when the parameters are changed without
call of snd_ak4114_build().  Now it checks the existence of kctl
element, and the workq is triggered after building the necessary
kcontrols.
Also, did some code clean up.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11 16:55:55 +02:00
Jean Delvare 1ab774e049 [ALSA] snd-ak4114: Fix two array overflows
Fix the handling of the TXCSB registers cache. There was one array
overflow in reg_write() and one in snd_ak4114_reg_write(). Thanks
to David Binderman for reporting the latter.
The second overflow probably doesn't matter much, given that the
function snd_ak4114_reg_write() appears to be never called. I wonder
why it exists and why it is exported.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09 09:03:55 +01:00
Takashi Iwai 3b6baa5a0b [ALSA] Remove delayed work properly at free and suspend
Remove delayed work properly at free and suspend in ac97 codec and
ak4114 drivers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09 09:03:28 +01:00
Takashi Iwai 0cb29ea0d4 [ALSA] Add even more 'const' to everything related to TLV
Mark TLV data as 'const'
Signed-of-by: Philipp Matthias Hahn <pmhahn@pmhahn.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09 09:03:19 +01:00
Takashi Iwai 517400cbc7 [ALSA] Add some more 'const', but needs changes in i2c/other/ak4*
Make data passed to ak4xxx_create 'const'.
Signed-of-by: Philipp Matthias Hahn <pmhahn@pmhahn.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09 09:03:17 +01:00
Takashi Iwai 4014c38bd9 [ALSA] ak4114 - Use global workqueue
Use global workqueue for simplicity instead of own workqueue.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09 09:02:41 +01:00
Jochen Voss feaa6a74d8 [ALSA] Enable the analog loopback of the Revolution 5.1
Enable the analog loopback of the Revolution 5.1 card.
This patch adds support for the PT2258 volume controller and modifies
the Revolution 5.1 driver to make use of this facility.  This allows
to control the analog loopback of the card.

Signed-off-by: Jochen Voss <voss@seehuhn.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09 09:00:05 +01:00
Jochen Voss a58e7cb16d [ALSA] Enable capture from line-in and CD on Revolution 5.1
Enable capture from line-in and CD on the Revolution 5.1 card.
This patch adds support for switching between the 5 input channels of
the AK5365 ADC and modifies the Revolution 5.1 driver to make use of
this facility.  Previously the capture channel was fixed to channel 0
(microphone on the Revolution 5.1 card).

Signed-off-by: Jochen Voss <voss@seehuhn.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09 09:00:03 +01:00
David Howells c4028958b6 WorkStruct: make allyesconfig
Fix up for make allyesconfig.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 14:57:56 +00:00
Takashi Iwai 854b66e442 [ALSA] ak4xxx - Remove bogus IPGA controls
Remove IPGA volume controls and merge the IPGA range to ADC volume
controls.  These two volumes are not really independent but connected
simply in different ranges 0-0x7f and 0x80-max.  It doesn't make sense
to provide two controls.
Since both 0x7f and 0x80 specify 0dB, a hack is needed for IPGA range
to skip 0x80 (increment one) for such controls.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23 10:46:55 +02:00
Takashi Iwai 723b2b0d36 [ALSA] Clean up and add TLV support to AK4xxx i2c driver
- Clean up the code in AK4xxx-ADDA i2c code.
- Fix capture gain controls for AK5365
- Changed the static table for DAC/ADC mixer labels to use
  structs
- Implemented TLV entries for each AK codec
  The volumes in AK4524, AK4528 and AK5365 are corrected with
  a table to be suitable for dB conversion.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23 10:45:08 +02:00
Jochen Voss 3479307f8c [ALSA] Fix volume control for the AK4358 DAC
Fix volume control for the AK4358 DAC.
The attenuation control registers of the AK4358 use only 7bit for the
volume, the msb is used to enable attenuation output.  Without this
patch there are 256 volume levels the lower 128 of which are mute.

Signed-off-by: Jochen Voss <voss@seehuhn.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23 10:44:00 +02:00
Takashi Iwai cf93907b98 [ALSA] Fix compile warnings in ak4xxx-adda.c
Fixed compile warnings in ak4xxx-adda.c reagarding missing
enum cases in switch.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23 10:40:32 +02:00
Jochen Voss 30ba6e207a [ALSA] Revolution 5.1 - complete the AK5365 support
Complete the AK5365 support.
This adds a boolean control to toggle the soft mute feature of the
AK5365 chip.

Signed-off-by: Jochen Voss <voss@seehuhn.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23 10:40:27 +02:00
Jochen Voss 683fe1537e [ALSA] Revolution 5.1 - add AK5365 ADC support
Add support for the AK5365 ADC.

Signed-off-by: Jochen Voss <voss@seehuhn.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23 10:40:18 +02:00
Takashi Iwai cc63935f56 [ALSA] trivial: Code clean up of i2c/cs8427.c
- Fix spaces, wrap lines in 80 columns.
- Move EXPORT_SYMBOL() adjacent to each function.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-07-12 20:07:42 +02:00
Adrian Bunk 7fd37481b1 [ALSA] sound/i2c/cs8427.c: don't export a static function
Static functions shouldn't be exported.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-07-12 20:07:39 +02:00
Takashi Iwai cb9d24e434 [ALSA] ak4xxx-adda - Code clean-up
Fix spaces, fold lines to fit 80 columns in ak4xxx-adda driver codes.
Split a long reset function to each codec routine just for better
readability.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-28 19:31:09 +02:00
Jani Alinikula c83c0c4705 [ALSA] Stereo controls for M-Audio Revolution cards
This patch adds stereo controls to revo cards by making the ak4xxx
driver mixers configurable from the card driver.

Signed-off-by: Jani Alinikula <janialinikula@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-28 19:31:03 +02:00
Takashi Iwai bf850204a7 [ALSA] Remove unneeded read/write_size fields in proc text ops
Remove unneeded read/write_size fields in proc text ops.
snd_info_set_text_ops() is fixed, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22 21:33:09 +02:00
Takashi Iwai 57c65c116e [ALSA] i2c - Move EXPORT_SYMBOL() to adjacent to each function
Move EXPORT_SYMBOL() to adjacent to each exported function/variable.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22 21:33:02 +02:00
Jaroslav Kysela e957ebf164 [ALSA] ice1712 & cs8427 - fix problem for S/PDIF input setup
Modules: I2C cs8427,ICE1712 driver

See ALSA bug#1785 for more details.

Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-03-22 10:28:15 +01:00
Ingo Molnar ef9f0a42db [ALSA] semaphore -> mutex (driver part)
Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22 10:24:57 +01:00
Takashi Iwai 97f02e05f2 [ALSA] Remove xxx_t typedefs: I2C drivers
Remove xxx_t typedefs from the i2c drivers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-01-03 12:18:08 +01:00
Takashi Iwai 0948e3c8bb [ALSA] Clean up sa11xx-uda1341 driver
Modules: SA11xx UDA1341 driver,L3 drivers,UDA1341

Clean up sa11xx-uda1341 driver:

- Fix buggy destructor
- Remove the global variable
- Move array definitions from uda1341.h
- Make functions in uda1341.c static

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-01-03 12:16:41 +01:00
Takashi Iwai c8714ba160 [ALSA] Remove tea6330t struct definition from public header
Modules: I2C tea6330t

Remove tea6330t struct definition from public header.
It's anyway unaccessible from outside.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-01-03 12:16:39 +01:00
Nishanth Aravamudan 8433a509c0 [ALSA] Fix schedule_timeout usage
Use schedule_timeout_{,un}interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.  Also use
human-time conversion functions instead of hard-coded division to avoid
rounding issues.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-04 13:19:49 +01:00
Takashi Iwai 99b359ba10 [ALSA] Add missing KERN_* suffix to printk
Add missing KERN_* suffix to printk.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-04 13:19:23 +01:00
Takashi Iwai 561b220a4d [ALSA] Replace with kzalloc() - others
Documentation,SA11xx UDA1341 driver,Generic drivers,MPU401 UART,OPL3
OPL4,Digigram VX core,I2C cs8427,I2C lib core,I2C tea6330t,L3 drivers
AK4114 receiver,AK4117 receiver,PDAudioCF driver,PPC PMAC driver
SPARC AMD7930 driver,SPARC cs4231 driver,Synth,Common EMU synth
USB generic driver,USB USX2Y
Replace kcalloc(1,..) with kzalloc().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12 10:48:22 +02:00
Jaroslav Kysela 145794dc09 [ALSA] ak4114: removed duplicate wake_up()
AK4114 receiver
- wake_up(&runtime->sleep) is already called in snd_pcm_post_stop()

Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2005-07-28 12:09:18 +02:00
Jesper Juhl 4d572776d4 [ALSA] Remove redundant NULL checks before kfree
Timer Midlevel,ALSA sequencer,ALSA<-OSS sequencer,Digigram VX core
I2C tea6330t,GUS Library,VIA82xx driver,VIA82xx-modem driver
CA0106 driver,CS46xx driver,EMU10K1/EMU10K2 driver,YMFPCI driver
Digigram VX Pocket driver,Common EMU synth,USB generic driver,USB USX2Y
Checking a pointer for NULL before calling kfree() on it is redundant,
kfree() deals with NULL pointers just fine.
This patch removes such checks from sound/

This patch also makes another, but closely related, change.
It avoids casting pointers about to be kfree()'ed.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22 12:27:43 +02:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00