Pull vfs cleanups from Al Viro:
"More cleanups from Christoph"
* 'work.preadv2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
nfsd: use RWF_SYNC
fs: add RWF_DSYNC aand RWF_SYNC
ceph: use generic_write_sync
fs: simplify the generic_write_sync prototype
fs: add IOCB_SYNC and IOCB_DSYNC
direct-io: remove the offset argument to dio_complete
direct-io: eliminate the offset argument to ->direct_IO
xfs: eliminate the pos variable in xfs_file_dio_aio_write
filemap: remove the pos argument to generic_file_direct_write
filemap: remove pos variables in generic_file_read_iter
This patch tries to speedup fzero_range by making space preallocation and
address removal of blocks in one dnode page as in batch operation.
In virtual machine, with zram driver:
dd if=/dev/zero of=/mnt/f2fs/file bs=1M count=4096
time xfs_io -f /mnt/f2fs/file -c "fzero 0 4096M"
Before:
real 0m3.276s
user 0m0.008s
sys 0m3.260s
After:
real 0m1.568s
user 0m0.000s
sys 0m1.564s
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: consider ENOSPC case]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
atomic/volatile ioctl interfaces are exposed to user like other file
operation interface, it needs to make them getting exclusion against
to each other to avoid potential conflict among these operations
in concurrent scenario.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In interfaces of ioctl, mnt_{want,drop}_write_file should be used for:
- get exclusion against file system freezing which may used by lvm
snapshot.
- do telling filesystem that a write is about to be performed on it, and
make sure that the writes are permitted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch enables reading node blocks in advance when truncating large
data blocks.
> time rm $MNT/testfile (500GB) after drop_cachees
Before : 9.422 s
After : 4.821 s
Reported-by: Stephen Bates <stephen.bates@microsemi.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch is to improve the expand_inode speed in fallocate by allocating
data blocks as many as possible in single locked node page.
In SSD,
# time fallocate -l 500G $MNT/testfile
Before : 1m 33.410 s
After : 24.758 s
Reported-by: Stephen Bates <stephen.bates@microsemi.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The following panic occurs when truncating inode which has inline
xattr to max filesize.
[<ffffffffa013d3be>] get_dnode_of_data+0x4e/0x580 [f2fs]
[<ffffffffa013aca1>] ? read_node_page+0x51/0x90 [f2fs]
[<ffffffffa013ad99>] ? get_node_page.part.34+0xb9/0x170 [f2fs]
[<ffffffffa01235b1>] truncate_blocks+0x131/0x3f0 [f2fs]
[<ffffffffa01238e3>] f2fs_truncate+0x73/0x100 [f2fs]
[<ffffffffa01239d2>] f2fs_setattr+0x62/0x2a0 [f2fs]
[<ffffffff811a72c8>] notify_change+0x158/0x300
[<ffffffff8118a42b>] do_truncate+0x6b/0xa0
[<ffffffff8118e539>] ? __sb_start_write+0x49/0x100
[<ffffffff8118a798>] do_sys_ftruncate.constprop.12+0x118/0x170
[<ffffffff8118a82e>] SyS_ftruncate+0xe/0x10
[<ffffffff8169efcf>] tracesys+0xe1/0xe6
[<ffffffffa0139ae0>] get_node_path+0x210/0x220 [f2fs]
<ffff880206a89ce8>
--[ end trace 5fea664dfbcc6625 ]---
The reason is truncate_blocks tries to truncate all node and data blocks
start from specified block offset with value of (max filesize / block
size), but actually, our valid max block offset is (max filesize / block
size) - 1, so f2fs detects such invalid block offset with BUG_ON in
truncation path.
This patch lets f2fs skip truncating data which is exceeding max
filesize.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The kiocb already has the new position, so use that. The only interesting
case is AIO, where we currently don't bother updating ki_pos. We're about
to free the kiocb after we're done, so we might as well update it to make
everyone's life simpler.
While we're at it also return the bytes written argument passed in if
we were successful so that the boilerplate error switch code in the
callers can go away.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This will allow us to do per-I/O sync file writes, as required by a lot
of fileservers or storage targets.
XXX: Will need a few additional audits for O_DSYNC
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In order to give atomic writes, we should consider power failure during
sync_node_pages in fsync.
So, this patch marks fsync flag only in the last dnode block.
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The fsync_node_pages should return pass or failure so that user could know
fsync is completed or not.
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch splits the existing sync_node_pages into (f)sync_node_pages.
The fsync_node_pages is used for f2fs_sync_file only.
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If somebody wrote some data before atomic writes, we should flush them in order
to handle atomic data in a right period.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The atomic/volatile operation should be done in pair of start and commit
ioctl.
For example, if a killed process remains open-ended atomic operation, we should
drop its flag as well as its atomic data. Otherwise, if sqlite initiates another
operation which doesn't require atomic writes, it will lose every data, since
f2fs still treats with them as atomic writes; nobody will trigger its commit.
Reported-by: Miao Xie <miaoxie@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When one reader closes its file while the other writer is doing atomic writes,
f2fs_release_file drops atomic data resulting in an empty commit.
This patch fixes this wrong commit problem by checking openess of the file.
Process0 Process1
open file
start atomic write
write data
read data
close file
f2fs_release_file()
clear atomic data
commit atomic write
Reported-by: Miao Xie <miaoxie@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch synced with the below two ext4 crypto fixes together.
In 4.6-rc1, f2fs newly introduced accessing f_path.dentry which crashes
overlayfs. To fix, now we need to use file_dentry() to access that field.
Fixes: c0a37d4878 ("ext4: use file_dentry()")
Fixes: 9dd78d8c9a ("ext4: use dget_parent() in ext4_file_open()")
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds the renamed functions moved from the f2fs crypto files.
1. definitions for per-file encryption used by ext4 and f2fs.
2. crypto.c for encrypt/decrypt functions
a. IO preparation:
- fscrypt_get_ctx / fscrypt_release_ctx
b. before IOs:
- fscrypt_encrypt_page
- fscrypt_decrypt_page
- fscrypt_zeroout_range
c. after IOs:
- fscrypt_decrypt_bio_pages
- fscrypt_pullback_bio_page
- fscrypt_restore_control_page
3. policy.c supporting context management.
a. For ioctls:
- fscrypt_process_policy
- fscrypt_get_policy
b. For context permission
- fscrypt_has_permitted_context
- fscrypt_inherit_context
4. keyinfo.c to handle permissions
- fscrypt_get_encryption_info
- fscrypt_free_encryption_info
5. fname.c to support filename encryption
a. general wrapper functions
- fscrypt_fname_disk_to_usr
- fscrypt_fname_usr_to_disk
- fscrypt_setup_filename
- fscrypt_free_filename
b. specific filename handling functions
- fscrypt_fname_alloc_buffer
- fscrypt_fname_free_buffer
6. Makefile and Kconfig
Cc: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Ildar Muslukhov <ildarm@google.com>
Signed-off-by: Uday Savagaonkar <savagaon@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add a new help f2fs_update_data_blkaddr to clean up redundant codes.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
1. Inode mapping tree can index page in range of [0, ULONG_MAX], however,
in some places, f2fs only search or iterate page in ragne of [0, LONG_MAX],
result in miss hitting in page cache.
2. filemap_fdatawait_range accepts range parameters in unit of bytes, so
the max range it covers should be [0, LLONG_MAX], if we use [0, LONG_MAX]
as range for waiting on writeback, big number of pages will not be covered.
This patch corrects above two issues.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch syncs f2fs with commit abdd438b26 ("ext4 crypto: handle
unexpected lack of encryption keys") from ext4.
Fix up attempts by users to try to write to a file when they don't
have access to the encryption key.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs support atomic write with following semantics:
1. open db file
2. ioctl start atomic write
3. (write db file) * n
4. ioctl commit atomic write
5. close db file
With this flow we can avoid file becoming corrupted when abnormal power
cut, because we hold data of transaction in referenced pages linked in
inmem_pages list of inode, but without setting them dirty, so these data
won't be persisted unless we commit them in step 4.
But we should still hold journal db file in memory by using volatile
write, because our semantics of 'atomic write support' is incomplete, in
step 4, we could fail to submit all dirty data of transaction, once
partial dirty data was committed in storage, then after a checkpoint &
abnormal power-cut, db file will be corrupted forever.
So this patch tries to improve atomic write flow by adding a revoking flow,
once inner error occurs in committing, this gives another chance to try to
revoke these partial submitted data of current transaction, it makes
committing operation more like aotmical one.
If we're not lucky, once revoking operation was failed, EAGAIN will be
reported to user for suggesting doing the recovery with held journal file,
or retrying current transaction again.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Split drop_inmem_pages from commit_inmem_pages for code readability,
and prepare for the following modification.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch makes f2fs_map_blocks supporting returning next potential
page offset which skips hole region in indirect tree of inode, and
use it to speed up fiemap in handling big hole case.
Test method:
xfs_io -f /mnt/f2fs/file -c "pwrite 1099511627776 4096"
time xfs_io -f /mnt/f2fs/file -c "fiemap -v"
Before:
time xfs_io -f /mnt/f2fs/file -c "fiemap -v"
/mnt/f2fs/file:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..2147483647]: hole 2147483648
1: [2147483648..2147483655]: 81920..81927 8 0x1
real 3m3.518s
user 0m0.000s
sys 3m3.456s
After:
time xfs_io -f /mnt/f2fs/file -c "fiemap -v"
/mnt/f2fs/file:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..2147483647]: hole 2147483648
1: [2147483648..2147483655]: 81920..81927 8 0x1
real 0m0.008s
user 0m0.000s
sys 0m0.008s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When seeking data in ->llseek, if we encounter a big hole which covers
several dnode pages, we will try to seek data from index of page which
is the first page of next dnode page, at most we could skip searching
(ADDRS_PER_BLOCK - 1) pages.
However it's still not efficient, because if our indirect/double-indirect
pointer are NULL, there are no dnode page locate in the tree indirect/
double-indirect pointer point to, it's not necessary to search the whole
region.
This patch introduces get_next_page_offset to calculate next page offset
based on current searching level and max searching level returned from
get_dnode_of_data, with this, we could skip searching the entire area
indirect or double-indirect node block is not exist.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are redundant pointer conversion in following call stack:
- at position a, inode was been converted to f2fs_file_info.
- at position b, f2fs_file_info was been converted to inode again.
- truncate_blocks(inode,..)
- fi = F2FS_I(inode) ---a
- ADDRS_PER_PAGE(node_page, fi)
- addrs_per_inode(fi)
- inode = &fi->vfs_inode ---b
- f2fs_has_inline_xattr(inode)
- fi = F2FS_I(inode)
- is_inode_flag_set(fi,..)
In order to avoid unneeded conversion, alter ADDRS_PER_PAGE and
addrs_per_inode to acept parameter with type of inode pointer.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In write_begin, if storage supports stable_page, we don't need to wait for
writeback to update its contents.
This patch introduces to use wait_for_stable_page instead of
wait_on_page_writeback.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).
Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch adds last time that user requested filesystem operations.
This information is used to detect whether system is idle or not later.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes missing IPU condition when fdatasync is called.
With this patch, fdatasync is able to avoid additional node writes for recovery.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are two rules to handle aborting volatile or atomic writes.
1. drop atomic writes
- we don't need to keep any stale db data.
2. write journal data
- we should keep the journal data with fsync for db recovery.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use f2fs_sync_fs to clean up codes in f2fs_ioc_write_checkpoint.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: remove unused err variable]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Sometimes we keep dumb when IO error occur in lower layer device, so user
will not receive any error return value for some operation, but actually,
the operation did not succeed.
This sould be avoided, so this patch reports such kind of error to user.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
do_checkpoint and write_checkpoint can fail due to reasons like triggering
in a readonly fs or encountering IO error of storage device.
So it's better to report such error info to user, let user be aware of
failure of doing checkpoint.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If user tries to update or read data, we don't need to call f2fs_balance_fs
which triggers f2fs_gc, which increases unnecessary long latency.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We can check inode's inline_data flag when calling to convert it.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We have already got one copy of valid super block in memory, do not grab
buffer header of super block all the time.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_map_blocks will set m_flags and m_len to 0, so we don't need to
reset m_flags ourselves, but have to reset m_len to correct value
before use it again.
Signed-off-by: Fan li <fanofcode.li@samsung.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
remove_dirty_dir_inode will be renamed to remove_dirty_inode as a generic
function in following patch for removing directory/regular/symlink inode
in global dirty list.
Here rename ino management related functions for readability, also in
order to avoid name conflict.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
map.m_len should be reduced after skip a block
Signed-off-by: Fan li <fanofcode.li@samsung.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
@lend of filemap_write_and_wait_range is supposed to be a "offset
in bytes where the range ends (inclusive)". Subtract 1 to avoid
writing an extra page.
Signed-off-by: Fan li <fanofcode.li@samsung.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In commit 3c45414527 ("f2fs: do not trim preallocated blocks when
truncating after i_size"), in order to follow the regulation: "truncate(x)
where x > i_size will not trim all blocks past i_size." like other file
systems, in ->setattr we invoked truncate_setsize instead of f2fs_truncate
to avoid unneeded block trimming in such case, but forgot to call
f2fs_convert_inline_inode keep consistency of inline data conversion rule.
This patch fixes to convert inline data if necessary.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use sbi->blocks_per_seg directly to avoid unnecessary calculation when using
1 << sbi->log_blocks_per_seg.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In 64-bit kernel f2fs can supports 32-bit ioctl system call by identifying
encoded code which is converted from 32-bit one to 64-bit one in
->compat_ioctl.
When we introduced new interfaces in ->ioctl, we forgot to enable them in
->compat_ioctl, so enable them for fixing.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: fix wrongly added spaces together]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a new ioctl F2FS_IOC_DEFRAGMENT to support file
defragment in a specified range of regular file.
This ioctl can be used in very limited workload: if user expects high
sequential read performance in randomly written file, this interface
can be used for defragmentation, after that file can be written as
continuous as possible in the device.
Meanwhile, it has side-effect, it will make holes in segments where
blocks located originally, so it's better to trigger GC to eliminate
fragment in segments.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If we got failure during commit_atomic_write, abort_volatile_write will be
called, but will not drop the inmemory pages due to no FI_ATOMIC_FILE.
Actually, there is no reason to check the flag in abort_volatile_write.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
different competitors
Since we use different page cache (normally inode's page cache for R/W
and meta inode's page cache for GC) to cache the same physical block
which is belong to an encrypted inode. Writeback of these two page
cache should be exclusive, but now we didn't handle writeback state
well, so there may be potential racing problem:
a)
kworker: f2fs_gc:
- f2fs_write_data_pages
- f2fs_write_data_page
- do_write_data_page
- write_data_page
- f2fs_submit_page_mbio
(page#1 in inode's page cache was queued
in f2fs bio cache, and be ready to write
to new blkaddr)
- gc_data_segment
- move_encrypted_block
- pagecache_get_page
(page#2 in meta inode's page cache
was cached with the invalid datas
of physical block located in new
blkaddr)
- f2fs_submit_page_mbio
(page#1 was submitted, later, page#2
with invalid data will be submitted)
b)
f2fs_gc:
- gc_data_segment
- move_encrypted_block
- f2fs_submit_page_mbio
(page#1 in meta inode's page cache was
queued in f2fs bio cache, and be ready
to write to new blkaddr)
user thread:
- f2fs_write_begin
- f2fs_submit_page_bio
(we submit the request to block layer
to update page#2 in inode's page cache
with physical block located in new
blkaddr, so here we may read gabbage
data from new blkaddr since GC hasn't
writebacked the page#1 yet)
This patch fixes above potential racing problem for encrypted inode.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For normal inodes, their pages are allocated with __GFP_FS, which can cause
filesystem calls when reclaiming memory.
This can incur a dead lock condition accordingly.
So, this patch addresses this problem by introducing
f2fs_grab_cache_page(.., bool for_write), which calls
grab_cache_page_write_begin() with AOP_FLAG_NOFS.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The f2fs_collapse_range and f2fs_insert_range changes the block addresses
directly. But that can cause uncovered SSA updates.
In that case, we need to give up to change the block addresses and do buffered
writes to keep filesystem consistency.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces F2FS_GOING_DOWN_METAFLUSH which flushes meta pages like
SSA blocks and then blocks all the writes.
This can be used by power-failure tests.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduce a new ioctl for those users who want to trigger
checkpoint from userspace through ioctl.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch drops in batches gc triggered through ioctl, since user
can easily control the gc by designing the loop around the ->ioctl.
We support synchronous gc by forcing using FG_GC in f2fs_gc, so with
it, user can make sure that in this round all blocks gced were
persistent in the device until ioctl returned.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes to update ctime and atime correctly when truncating
larger in ->setattr.
The bug is reported by xfstest generic/313 as below:
generic/313 2s ... - output mismatch (see ./results/generic/313.out.bad)
--- tests/generic/313.out 2015-08-04 15:28:53.430798882 +0800
+++ results/generic/313.out.bad 2015-09-28 17:04:27.294278016 +0800
@@ -1,2 +1,4 @@
QA output created by 313
Silence is golden
+ctime not updated after truncate up
+mtime not updated after truncate up
...
(Run 'diff -u tests/generic/313.out tests/generic/313.out.bad' to see the entire diff)
Ran: generic/313
Failures: generic/313
Failed 1 of 1 tests
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
truncate_data_blocks_range can do in batches truncation which makes all
changes in dnode page content, dnode page status, extent cache, block
count updating together.
But previously, truncate_hole() always truncates one block in dnode page
at a time by invoking truncate_data_blocks_range(,1), which make thing
slow.
This patch changes truncate_hole() to do in batches truncation for all
target blocks in one direct node inside truncate_data_blocks_range, which
can make our punch hole operation in ->fallocate more efficent.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We have potential overflow issue when calculating size of object, when
we left shift index with PAGE_CACHE_SHIFT bits, if type of index has only
32-bits space in 32-bit architecture, left shifting will incur overflow,
i.e:
pgoff_t index = 0xFFFFFFFF;
loff_t size = index << PAGE_CACHE_SHIFT;
size: 0xFFFFF000
So we should cast index with 64-bits type to avoid this issue.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch changes to verify file type early in f2fs_fallocate for
cleanup, meanwhile this also fixes to add missing verification for
expand_inode_data.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This fixes the incorrect return statement at the end of the function
f2fs_ioc_release_volatile_write's body for returning zero as this is
incorrect due to the function call before this return statement to
the function punch_hole being able to fail and we should return this
function's return fail directly in order to signal to callers of the
function f2fs_ioc_release_volatile if a failure arises with this call
to punch_hole fails.
Signed-off-by: Nicholas Krause <xerofoify@gmail.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduce a new helper f2fs_update_extent_tree_range which can
do extent mapping update at a specified range.
The main idea is:
1) punch all mapping info in extent node(s) which are at a specified range;
2) try to merge new extent mapping with adjacent node, or failing that,
insert the mapping into extent tree as a new node.
In order to see the benefit, I add a function for stating time stamping
count as below:
uint64_t rdtsc(void)
{
uint32_t lo, hi;
__asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
return (uint64_t)hi << 32 | lo;
}
My test environment is: ubuntu, intel i7-3770, 16G memory, 256g micron ssd.
truncation path: update extent cache from truncate_data_blocks_range
non-truncataion path: update extent cache from other paths
total: all update paths
a) Removing 128MB file which has one extent node mapping whole range of
file:
1. dd if=/dev/zero of=/mnt/f2fs/128M bs=1M count=128
2. sync
3. rm /mnt/f2fs/128M
Before:
total count average
truncation: 7651022 32768 233.49
Patched:
total count average
truncation: 3321 33 100.64
b) fsstress:
fsstress -d /mnt/f2fs -l 5 -n 100 -p 20
Test times: 5 times.
Before:
total count average
truncation: 5812480.6 20911.6 277.95
non-truncation: 7783845.6 13440.8 579.12
total: 13596326.2 34352.4 395.79
Patched:
total count average
truncation: 1281283.0 3041.6 421.25
non-truncation: 7355844.4 13662.8 538.38
total: 8637127.4 16704.4 517.06
1) For the updates in truncation path:
- we can see updating in batches leads total tsc and update count reducing
explicitly;
- besides, for a single batched updating, punching multiple extent nodes
in a loop, result in executing more operations, so our average tsc
increase intensively.
2) For the updates in non-truncation path:
- there is a little improvement, that is because for the scenario that we
just need to update in the head or tail of extent node, new interface
optimize to update info in extent node directly, rather than removing
original extent node for updating and then inserting that updated one
into cache as new node.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes to return error number of f2fs_truncate, so that we
can handle the error correctly in callers.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, update_inode_page is not called under f2fs_lock_op.
Instead we should call with f2fs_write_inode.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
fill_zero can fail due to a lot of reason, but previously we do not handle
its return value, so its callers such as punch_hole/f2fs_zero_range may
report success, but actually can fail because of error occurs inside
fill_zero.
This patch fixes to report correct return value of fill_zero.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds to handle error cases in commit_inmem_pages.
If an error occurs, it stops to write the pages and return the error right
away.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_ioc_start_{atomic,volatile}_write, if we failed in converting
inline data, we will report error to user, but still remain atomic/volatile
flag in inode, it will impact further writes for this file. Fix it.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes the incorrect range (0, LONG_MAX) which is used
in ranged fsync. If we use LONG_MAX as the parameter for indicating
the end of file we want to synchronize, in 32-bits architecture
machine, these datas after 4GB offset may not be persisted in
storage after ->fsync returned.
Here, we alter LONG_MAX to LLONG_MAX to fix this issue.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In handle_failed_inode, there is a potential deadlock which can happen
in below call path:
- f2fs_create
- f2fs_lock_op down_read(cp_rwsem)
- f2fs_add_link
- __f2fs_add_link
- init_inode_metadata
- f2fs_init_security failed
- truncate_blocks failed
- handle_failed_inode
- f2fs_truncate
- truncate_blocks(..,true)
- write_checkpoint
- block_operations
- f2fs_lock_all down_write(cp_rwsem)
- f2fs_lock_op down_read(cp_rwsem)
So in this path, we pass parameter to f2fs_truncate to make sure
cp_rwsem in truncate_blocks will not be locked again.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_do_collapse, region cp_rwsem covered is large, since it will be
held until all blocks are left shifted, so if we try to collapse small
area at the beginning of large file, checkpoint who want to grab writer's
lock of cp_rwsem will be delayed for long time.
In order to avoid this condition, altering to lock/unlock cp_rwsem each
shift operation.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
With cost-benifit method, background gc will consider old section with
fewer valid blocks as candidate victim, these old blocks in section will
be treated as cold data, and laterly will be moved into cold segment.
But if the gcing page is attached by user through buffered or mmaped
write, we should reset the page as non-cold one, because this page may
have more opportunity for further updating.
So fix to add clearing code for the missed 'mmap' case.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When background gc is off, the only way to trigger gc is executing
a force gc in some operations who wants to grab space in disk.
The executing condition is limited: to execute force gc, we should
wait for the time when there is almost no more free section for LFS
allocation. This seems not reasonable for our user who wants to
control triggering gc by himself.
This patch introduces F2FS_IOC_GARBAGE_COLLECT interface for
triggering garbage collection by using ioctl. It provides our users
one more option to trigger gc.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For newly added fallocate types, it should convert inline_data before handling
block swapping.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When we perform generic/092 in xfstests, output is like below:
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
0: [0..10239]: data
0: [0..10239]: data
-1: [10240..20479]: unwritten
+1: [10240..14335]: unwritten
This is because with this testcase, we redefine the regulation for
truncate in perallocated space past i_size as below:
"There was some confused about what the fs was supposed to do when you
truncate at i_size with preallocated space past i_size. We decided on the
following things.
1) truncate(i_size) will trim all blocks past i_size.
2) truncate(x) where x > i_size will not trim all blocks past i_size.
"
This method is used in xfs, and then ext4/btrfs will follow the rule.
This patch fixes to follow the new rule for f2fs.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In recovery procedure for superblock, we try to write data of valid
superblock into invalid one for recovery, work should be finished here,
but then still we will write the valid one with its original data.
This operation is not needed. Let's skip doing this unnecessary work.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
FALLOC_FL_INSERT_RANGE flag for ->fallocate was introduced in commit
dd46c78778 ("fs: Add support FALLOC_FL_INSERT_RANGE for fallocate").
The effect of FALLOC_FL_INSERT_RANGE command is the opposite of
FALLOC_FL_COLLAPSE_RANGE, if this command was performed, all data from
offset to EOF in our file will be shifted to right as given length, and
then range [offset, offset + length] becomes a hole.
This command is useful for our user who wants to add some data in the
middle of the file, for example: video/music editor will insert a keyframe
in specified position of media file, with this command we can easily create
a hole for inserting without removing original data.
This patch introduces f2fs_insert_range() to support FALLOC_FL_INSERT_RANGE.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Yuan Zhong <yuan.mark.zhong@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch clean up codes through:
1.rename f2fs_replace_block to __f2fs_replace_block().
2.introduce new f2fs_replace_block() to include __f2fs_replace_block()
and some common related codes around __f2fs_replace_block().
Then, newly introduced function f2fs_replace_block can be used by
following patch.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Encryption policy should only be set to an empty directory through ioctl,
This patch add a judgement condition to verify type of the target inode
to avoid incorrectly configuring for non-directory.
Additionally, remove unneeded inline data conversion since regular or symlink
file should not be processed here.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a bit flag to indicate whether or not i_name in the inode
is encrypted.
If this name is encrypted, we can't do recover_dentry during roll-forward.
So, f2fs_sync_file() needs to do checkpoint, if this will be needed in future.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds encryption support in read and write paths.
Note that, in f2fs, we need to consider cleaning operation.
In cleaning procedure, we must avoid encrypting and decrypting written blocks.
So, this patch implements move_encrypted_block().
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch activates the following APIs for encryption support.
The rules quoted by ext4 are:
- An unencrypted directory may contain encrypted or unencrypted files
or directories.
- All files or directories in a directory must be protected using the
same key as their containing directory.
- Encrypted inode for regular file should not have inline_data.
- Encrypted symlink and directory may have inline_data and inline_dentry.
This patch activates the following APIs.
1. f2fs_link : validate context
2. f2fs_lookup : ''
3. f2fs_rename : ''
4. f2fs_create/f2fs_mkdir : inherit its dir's context
5. f2fs_direct_IO : do buffered io for regular files
6. f2fs_open : check encryption info
7. f2fs_file_mmap : ''
8. f2fs_setattr : ''
9. f2fs_file_write_iter : '' (Called by sys_io_submit)
10. f2fs_fallocate : do not support fcollapse
11. f2fs_evict_inode : free_encryption_info
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds encryption policy and password salt support through ioctl
implementation.
It adds three ioctls:
F2FS_IOC_SET_ENCRYPTION_POLICY,
F2FS_IOC_GET_ENCRYPTION_POLICY,
F2FS_IOC_GET_ENCRYPTION_PWSALT, which use xattr operations.
Note that, these definition and codes are taken from ext4 crypto support.
For f2fs, xattr operations and on-disk flags for superblock and inode were
changed.
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Ildar Muslukhov <muslukhovi@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now, FALLOC_FL_ZERO_RANGE flag in ->fallocate is supported in ext4/xfs.
In commit, the semantics of this flag is descripted as following:"
1) Make sure that both offset and len are block size aligned.
2) Update the i_size of inode by len bytes.
3) Compute the file's logical block number against offset. If the computed
block number is not the starting block of the extent, split the extent
such that the block number is the starting block of the extent.
4) Shift all the extents which are lying between
[offset, last allocated extent] towards right by len bytes. This step
will make a hole of len bytes at offset."
This patch implements fallocate's FALLOC_FL_ZERO_RANGE for f2fs.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now, FALLOC_FL_COLLAPSE_RANGE flag in ->fallocate is supported in ext4/xfs.
In commit, the semantics of this flag is descripted as following:"
1) It collapses the range lying between offset and length by removing any
data blocks which are present in this range and than updates all the
logical offsets of extents beyond "offset + len" to nullify the hole
created by removing blocks. In short, it does not leave a hole.
2) It should be used exclusively. No other fallocate flag in combination.
3) Offset and length supplied to fallocate should be fs block size aligned
in case of xfs and ext4.
4) Collaspe range does not work beyond i_size."
This patch implements fallocate's FALLOC_FL_COLLAPSE_RANGE for f2fs.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch splits find_data_page as follows.
1. f2fs_gc
- use get_read_data_page() with read only
2. find_in_level
- use find_data_page without locked page
3. truncate_partial_page
- In the case cache_only mode, just drop cached page.
- Ohterwise, use get_lock_data_page() and guarantee to truncate
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds f2fs_sb_info and page pointers in f2fs_io_info structure.
With this change, we can reduce a lot of parameters for IO functions.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In the punch_hole(), if offset bigger than inode size, it returns SUCCESS.
Then f2fs_fallocate() will update time and dirty mark.
In that case, inode has not been modified actually.
So I have added offset check routine that prevent to call the punch_hole().
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull fourth vfs update from Al Viro:
"d_inode() annotations from David Howells (sat in for-next since before
the beginning of merge window) + four assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RCU pathwalk breakage when running into a symlink overmounting something
fix I_DIO_WAKEUP definition
direct-io: only inc/dec inode->i_dio_count for file systems
fs/9p: fix readdir()
VFS: assorted d_backing_inode() annotations
VFS: fs/inode.c helpers: d_inode() annotations
VFS: fs/cachefiles: d_backing_inode() annotations
VFS: fs library helpers: d_inode() annotations
VFS: assorted weird filesystems: d_inode() annotations
VFS: normal filesystems (and lustre): d_inode() annotations
VFS: security/: d_inode() annotations
VFS: security/: d_backing_inode() annotations
VFS: net/: d_inode() annotations
VFS: net/unix: d_backing_inode() annotations
VFS: kernel/: d_inode() annotations
VFS: audit: d_backing_inode() annotations
VFS: Fix up some ->d_inode accesses in the chelsio driver
VFS: Cachefiles should perform fs modifications on the top layer only
VFS: AF_UNIX sockets should call mknod on the top layer only
Pull f2fs updates from Jaegeuk Kim:
"New features:
- in-memory extent_cache
- fs_shutdown to test power-off-recovery
- use inline_data to store symlink path
- show f2fs as a non-misc filesystem
Major fixes:
- avoid CPU stalls on sync_dirty_dir_inodes
- fix some power-off-recovery procedure
- fix handling of broken symlink correctly
- fix missing dot and dotdot made by sudden power cuts
- handle wrong data index during roll-forward recovery
- preallocate data blocks for direct_io
... and a bunch of minor bug fixes and cleanups"
* tag 'for-f2fs-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (71 commits)
f2fs: pass checkpoint reason on roll-forward recovery
f2fs: avoid abnormal behavior on broken symlink
f2fs: flush symlink path to avoid broken symlink after POR
f2fs: change 0 to false for bool type
f2fs: do not recover wrong data index
f2fs: do not increase link count during recovery
f2fs: assign parent's i_mode for empty dir
f2fs: add F2FS_INLINE_DOTS to recover missing dot dentries
f2fs: fix mismatching lock and unlock pages for roll-forward recovery
f2fs: fix sparse warnings
f2fs: limit b_size of mapped bh in f2fs_map_bh
f2fs: persist system.advise into on-disk inode
f2fs: avoid NULL pointer dereference in f2fs_xattr_advise_get
f2fs: preallocate fallocated blocks for direct IO
f2fs: enable inline data by default
f2fs: preserve extent info for extent cache
f2fs: initialize extent tree with on-disk extent info of inode
f2fs: introduce __{find,grab}_extent_tree
f2fs: split set_data_blkaddr from f2fs_update_extent_cache
f2fs: enable fast symlink by utilizing inline data
...
that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All places outside of core VFS that checked ->read and ->write for being NULL or
called the methods directly are gone now, so NULL {read,write} with non-NULL
{read,write}_iter will do the right thing in all cases.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Split __set_data_blkaddr from f2fs_update_extent_cache for readability.
Additionally rename __set_data_blkaddr to set_data_blkaddr for exporting.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch is to avoid some punch_hole overhead when releasing volatile data.
If volatile data was not written yet, we just can make the first page as zero.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously if inode is with inline data, we will try to invalid partial inline
data in page #0 when we truncate size of inode in truncate_partial_data_page().
And then we set page #0 to dirty, after this we can synchronize inode page with
page #0 at ->writepage().
But sometimes we will fail to operate page #0 in truncate_partial_data_page()
due to below reason:
a) if offset is zero, we will skip setting page #0 to dirty.
b) if page #0 is not uptodate, we will fail to update it as it has no mapping
data.
So with following operations, we will meet recent data which should be
truncated.
1.write inline data to file
2.sync first data page to inode page
3.truncate file size to 0
4.truncate file size to max_inline_size
5.echo 1 > /proc/sys/vm/drop_caches
6.read file --> meet original inline data which is remained in inode page.
This patch renames truncate_inline_data() to truncate_inline_inode() for code
readability, then use truncate_inline_inode() to truncate inline data in inode
page in truncate_blocks() and truncate page #0 in truncate_partial_data_page()
for fixing.
v2:
o truncate partially #0 page in truncate_partial_data_page to avoid keeping
old data in #0 page.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Linus Torvalds
Chao Yu
Jaegeuk Kim
Christoph Hellwig
Kirill A. Shutemov
Chao Yu
Al Viro
Fan Li
Nicholas Krause
Taehee Yoo
David Howells