Commit 8263db4d77 ("MIPS: cmpxchg: Implement __cmpxchg() as a
function") refactored our implementation of __cmpxchg() to be a function
rather than a macro, with the aim of making it easier to read & modify.
Unfortunately the commit breaks use of cmpxchg() for signed 32 bit
values when we have a 64 bit kernel with kernel_uses_llsc == false,
because:
- In cmpxchg_local() we cast the old value to the type the pointer
points to, and then to an unsigned long. If the pointer points to a
signed type smaller than 64 bits then the old value will be sign
extended to 64 bits. That is, bits beyond the size of the pointed to
type will be set to 1 if the old value is negative. In the case of a
signed 32 bit integer with a negative value, bits 63:32 will all be
set.
- In __cmpxchg_asm() we load the value from memory, ie. dereference the
pointer, and store the value as an unsigned integer (__ret) whose
size matches the pointer. For a 32 bit cmpxchg() this means we store
the value in a u32, because the pointer provided to __cmpxchg_asm()
by __cmpxchg() is of type volatile u32 *.
- __cmpxchg_asm() then checks whether the value in memory (__ret)
matches the provided old value, by comparing the two values. This
results in the u32 being promoted to a 64 bit unsigned long to match
the old argument - however because both types are unsigned the value
is zero extended, which does not match the sign extension performed
on the old value in cmpxchg_local() earlier.
This mismatch means that unfortunate cmpxchg() calls can incorrectly
fail for 64 bit kernels with kernel_uses_llsc == false. This is the case
on at least non-SMP Cavium Octeon kernels, which hardcode
kernel_uses_llsc in their cpu-feature-overrides.h header. Using a
v4.13-rc7 kernel configured using cavium_octeon_defconfig with SMP
manually disabled, this presents itself as oddity when we reach
userland - for example:
can't run '/bin/mount': Text file busy
can't run '/bin/mkdir': Text file busy
can't run '/bin/mkdir': Text file busy
can't run '/bin/mount': Text file busy
can't run '/bin/hostname': Text file busy
can't run '/etc/init.d/rcS': Text file busy
can't run '/sbin/getty': Text file busy
can't run '/sbin/getty': Text file busy
It appears that some part of the init process, which is in this case
buildroot's busybox init, is running successfully. It never manages to
reach the login prompt though, and complains about /sbin/getty being
busy repeatedly and indefinitely.
Fix this by casting the old value provided to __cmpxchg_asm() to an
appropriately sized unsigned integer, such that we consistently
zero-extend avoiding the mismatch. The __cmpxchg_small() case for 8 & 16
bit values is unaffected because __cmpxchg_small() already masks
provided values appropriately.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 8263db4d77 ("MIPS: cmpxchg: Implement __cmpxchg() as a function")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17226/
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
While line6_probe() may kick off URB for a control MIDI endpoint, the
function doesn't clean up it properly at its error path. This results
in a leftover URB action that is eventually triggered later and causes
an Oops like:
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 0 Comm: swapper/1 Not tainted
RIP: 0010:usb_fill_bulk_urb ./include/linux/usb.h:1619
RIP: 0010:line6_start_listen+0x3fe/0x9e0 sound/usb/line6/driver.c:76
Call Trace:
<IRQ>
line6_data_received+0x1f7/0x470 sound/usb/line6/driver.c:326
__usb_hcd_giveback_urb+0x2e0/0x650 drivers/usb/core/hcd.c:1779
usb_hcd_giveback_urb+0x337/0x420 drivers/usb/core/hcd.c:1845
dummy_timer+0xba9/0x39f0 drivers/usb/gadget/udc/dummy_hcd.c:1965
call_timer_fn+0x2a2/0x940 kernel/time/timer.c:1281
....
Since the whole clean-up procedure is done in line6_disconnect()
callback, we can simply call it in the error path instead of
open-coding the whole again. It'll fix such an issue automagically.
The bug was spotted by syzkaller.
Fixes: eedd0e95d3 ("ALSA: line6: Don't forget to call driver's destructor at error path")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When podhd_init() failed with the acquiring a ctrl i/f, the line6
helper still calls the disconnect callback that eventually calls again
usb_driver_release_interface() with the NULL intf.
Put the proper NULL check before calling it for avoiding an Oops.
Fixes: fc90172ba2 ("ALSA: line6: Claim pod x3 usb data interface")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The error path in podhd_init() tries to clear the pending timer, while
the timer object is initialized at the end of init sequence, thus it
may hit the uninitialized object, as spotted by syzkaller:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 1 PID: 1845 Comm: kworker/1:2 Not tainted
4.14.0-rc2-42613-g1488251d1a98 #238
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
__dump_stack lib/dump_stack.c:16
dump_stack+0x292/0x395 lib/dump_stack.c:52
register_lock_class+0x6c4/0x1a00 kernel/locking/lockdep.c:769
__lock_acquire+0x27e/0x4550 kernel/locking/lockdep.c:3385
lock_acquire+0x259/0x620 kernel/locking/lockdep.c:4002
del_timer_sync+0x12c/0x280 kernel/time/timer.c:1237
podhd_disconnect+0x8c/0x160 sound/usb/line6/podhd.c:299
line6_probe+0x844/0x1310 sound/usb/line6/driver.c:783
podhd_probe+0x64/0x70 sound/usb/line6/podhd.c:474
....
For addressing it, assure the initializations of timer and work by
moving them to the beginning of podhd_init().
Fixes: 790869dacc ("ALSA: line6: Add support for POD X3")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 2c16d60332 ("netfilter: xt_bpf: support ebpf") introduced
support for attaching an eBPF object by an fd, with the
'bpf_mt_check_v1' ABI expecting the '.fd' to be specified upon each
IPT_SO_SET_REPLACE call.
However this breaks subsequent iptables calls:
# iptables -A INPUT -m bpf --object-pinned /sys/fs/bpf/xxx -j ACCEPT
# iptables -A INPUT -s 5.6.7.8 -j ACCEPT
iptables: Invalid argument. Run `dmesg' for more information.
That's because iptables works by loading existing rules using
IPT_SO_GET_ENTRIES to userspace, then issuing IPT_SO_SET_REPLACE with
the replacement set.
However, the loaded 'xt_bpf_info_v1' has an arbitrary '.fd' number
(from the initial "iptables -m bpf" invocation) - so when 2nd invocation
occurs, userspace passes a bogus fd number, which leads to
'bpf_mt_check_v1' to fail.
One suggested solution [1] was to hack iptables userspace, to perform a
"entries fixup" immediatley after IPT_SO_GET_ENTRIES, by opening a new,
process-local fd per every 'xt_bpf_info_v1' entry seen.
However, in [2] both Pablo Neira Ayuso and Willem de Bruijn suggested to
depricate the xt_bpf_info_v1 ABI dealing with pinned ebpf objects.
This fix changes the XT_BPF_MODE_FD_PINNED behavior to ignore the given
'.fd' and instead perform an in-kernel lookup for the bpf object given
the provided '.path'.
It also defines an alias for the XT_BPF_MODE_FD_PINNED mode, named
XT_BPF_MODE_PATH_PINNED, to better reflect the fact that the user is
expected to provide the path of the pinned object.
Existing XT_BPF_MODE_FD_ELF behavior (non-pinned fd mode) is preserved.
References: [1] https://marc.info/?l=netfilter-devel&m=150564724607440&w=2
[2] https://marc.info/?l=netfilter-devel&m=150575727129880&w=2
Reported-by: Rafael Buchbinder <rafi@rbk.ms>
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Set the default number of RX and TX queues due to
the recent changes of stmmac driver.
Otherwise the ethernet will crash once it starts.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17452/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Compiling ebpf_jit.c with gcc 4.9 results in a (likely spurious)
compiler warning, as gcc has detected that the variable "target" may be
used uninitialised. Since -Werror is active, this is treated as an error
and causes a kernel build failure whenever CONFIG_MIPS_EBPF_JIT is
enabled.
arch/mips/net/ebpf_jit.c: In function 'build_one_insn':
arch/mips/net/ebpf_jit.c:1118:80: error: 'target' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
emit_instr(ctx, j, target);
^
cc1: all warnings being treated as errors
Fix this by initialising "target" to 0. If it really is used
uninitialised this would result in a jump to 0 and a detectable run time
failure.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Fixes: b6bd53f9c4 ("MIPS: Add missing file for eBPF JIT.")
Cc: James Hogan <james.hogan@imgtec.com>
Cc: David Daney <david.daney@cavium.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # v4.13+
Patchwork: https://patchwork.linux-mips.org/patch/17375/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The event handler in the virmidi sequencer code takes a read-lock for
the linked list traverse, while it's calling snd_seq_dump_var_event()
in the loop. The latter function may expand the user-space data
depending on the event type. It eventually invokes copy_from_user(),
which might be a potential dead-lock.
The sequencer core guarantees that the user-space data is passed only
with atomic=0 argument, but snd_virmidi_dev_receive_event() ignores it
and always takes read-lock(). For avoiding the problem above, this
patch introduces rwsem for non-atomic case, while keeping rwlock for
atomic case.
Also while we're at it: the superfluous irq flags is dropped in
snd_virmidi_input_open().
Reported-by: Jia-Ju Bai <baijiaju1990@163.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like other Plantronics devices, P610 does not support sample
rate reading. Apply sample rate quirk to it.
BugLink: https://bugs.launchpad.net/bugs/1719853
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The alt_max_short() macro in asm/alternative.h does not work as
intended, leading to nasty bugs. E.g. alt_max_short("1", "3")
evaluates to 3, but alt_max_short("3", "1") evaluates to 1 -- not
exactly the maximum of 1 and 3.
In fact, I had to learn it the hard way by crashing my kernel in not
so funny ways by attempting to make use of the ALTENATIVE_2 macro
with alternatives where the first one was larger than the second
one.
According to [1] and commit dbe4058a6a ("x86/alternatives: Fix
ALTERNATIVE_2 padding generation properly") the right handed side
should read "-(-(a < b))" not "-(-(a - b))". Fix that, to make the
macro work as intended.
While at it, fix up the comments regarding the additional "-", too.
It's not about gas' usage of s32 but brain dead logic of having a
"true" value of -1 for the < operator ... *sigh*
Btw., the one in asm/alternative-asm.h is correct. And, apparently,
all current users of ALTERNATIVE_2() pass same sized alternatives,
avoiding to hit the bug.
[1] http://graphics.stanford.edu/~seander/bithacks.html#IntegerMinOrMax
Reviewed-and-tested-by: Borislav Petkov <bp@suse.de>
Fixes: dbe4058a6a ("x86/alternatives: Fix ALTERNATIVE_2 padding generation properly")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1507228213-13095-1-git-send-email-minipli@googlemail.com
Trying to reboot via real mode fails with PCID on: long mode cannot
be exited while CR4.PCIDE is set. (No, I have no idea why, but the
SDM and actual CPUs are in agreement here.) The result is a GPF and
a hang instead of a reboot.
I didn't catch this in testing because neither my computer nor my VM
reboots this way. I can trigger it with reboot=bios, though.
Fixes: 660da7c922 ("x86/mm: Enable CR4.PCIDE on supported systems")
Reported-and-tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/f1e7d965998018450a7a70c2823873686a8b21c0.1507524746.git.luto@kernel.org
Managed interrupts can end up in a stale state on CPU hotplug. If the
interrupt is not targeting a single CPU, i.e. the affinity mask spawns
multiple CPUs then the following can happen:
After boot:
dstate: 0x01601200
IRQD_ACTIVATED
IRQD_IRQ_STARTED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_SET
IRQD_AFFINITY_MANAGED
node: 0
affinity: 24-31
effectiv: 24
pending: 0
After offlining CPU 31 - 24
dstate: 0x01a31000
IRQD_IRQ_DISABLED
IRQD_IRQ_MASKED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_SET
IRQD_AFFINITY_MANAGED
IRQD_MANAGED_SHUTDOWN
node: 0
affinity: 24-31
effectiv: 24
pending: 0
Now CPU 25 gets onlined again, so it should get the effective interrupt
affinity for this interruopt, but due to the x86 interrupt affinity setter
restrictions this ends up after restarting the interrupt with:
dstate: 0x01601300
IRQD_ACTIVATED
IRQD_IRQ_STARTED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_SET
IRQD_SETAFFINITY_PENDING
IRQD_AFFINITY_MANAGED
node: 0
affinity: 24-31
effectiv: 24
pending: 24-31
So the interrupt is still affine to CPU 24, which was the last CPU to go
offline of that affinity set and the move to an online CPU within 24-31,
in this case 25, is pending. This mechanism is x86/ia64 specific as those
architectures cannot move interrupts from thread context and do this when
an interrupt is actually handled. So the move is set to pending.
Whats worse is that offlining CPU 25 again results in:
dstate: 0x01601300
IRQD_ACTIVATED
IRQD_IRQ_STARTED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_SET
IRQD_SETAFFINITY_PENDING
IRQD_AFFINITY_MANAGED
node: 0
affinity: 24-31
effectiv: 24
pending: 24-31
This means the interrupt has not been shut down, because the outgoing CPU
is not in the effective affinity mask, but of course nothing notices that
the effective affinity mask is pointing at an offline CPU.
In the case of restarting a managed interrupt the move restriction does not
apply, so the affinity setting can be made unconditional. This needs to be
done _before_ the interrupt is started up as otherwise the condition for
moving it from thread context would not longer be fulfilled.
With that change applied onlining CPU 25 after offlining 31-24 results in:
dstate: 0x01600200
IRQD_ACTIVATED
IRQD_IRQ_STARTED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_MANAGED
node: 0
affinity: 24-31
effectiv: 25
pending:
And after offlining CPU 25:
dstate: 0x01a30000
IRQD_IRQ_DISABLED
IRQD_IRQ_MASKED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_MANAGED
IRQD_MANAGED_SHUTDOWN
node: 0
affinity: 24-31
effectiv: 25
pending:
which is the correct and expected result.
Fixes: 761ea388e8 ("genirq: Handle managed irqs gracefully in irq_startup()")
Reported-by: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: axboe@kernel.dk
Cc: linux-scsi@vger.kernel.org
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: mpe@ellerman.id.au
Cc: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: keith.busch@intel.com
Cc: peterz@infradead.org
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1710042208400.2406@nanos
The effective affinity mask handling has no safety net when the mask is not
updated by the interrupt chip or the mask contains offline CPUs.
If that happens the CPU unplug code fails to migrate interrupts.
Add sanity checks and emit a warning when the mask contains only offline
CPUs.
Fixes: 415fcf1a22 ("genirq/cpuhotplug: Use effective affinity mask")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1710042208400.2406@nanos
Emit a one time warning when the effective affinity mask is enabled in
Kconfig, but the interrupt chip does not update the mask in its
irq_set_affinity() callback,
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1710042208400.2406@nanos
Here's a fix for a cp210x regression that prevented a class of devices
from being successfully probed. Two use-after-free bugs in the console
code are also fixed.
Included are also some new device ids.
All but the last three commits have been in linux-next with no reported
issues.
-----BEGIN PGP SIGNATURE-----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=GjJU
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for v4.14-rc5
Here's a fix for a cp210x regression that prevented a class of devices
from being successfully probed. Two use-after-free bugs in the console
code are also fixed.
Included are also some new device ids.
All but the last three commits have been in linux-next with no reported
issues.
In function {ipv4,ipv6}_synproxy_hook we expect a normal tcp packet, but
the real server maybe reply an icmp error packet related to the exist
tcp conntrack, so we will access wrong tcp data.
Fix it by checking for the protocol field and only process tcp traffic.
Signed-off-by: Lin Zhang <xiaolou4617@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Make sure to reset the USB-console port pointer when console setup fails
in order to avoid having the struct usb_serial be prematurely freed by
the console code when the device is later disconnected.
Fixes: 73e487fdb7 ("[PATCH] USB console: fix disconnection issues")
Cc: stable <stable@vger.kernel.org> # 2.6.18
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
A clean-up patch removing two redundant NULL-checks from the console
disconnect handler inadvertently also removed a third check. This could
lead to the struct usb_serial being prematurely freed by the console
code when a driver accepts but does not register any ports for an
interface which also lacks endpoint descriptors.
Fixes: 0e517c93dc ("USB: serial: console: clean up sanity checks")
Cc: stable <stable@vger.kernel.org> # 4.11
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
When a bundling message is received, the function tipc_link_input()
calls function tipc_msg_extract() to unbundle all inner messages of
the bundling message before adding them to input queue.
The function tipc_msg_extract() just clones all inner skb for all
inner messagges from the bundling skb. This means that the skb
headroom of an inner message overlaps with the data part of the
preceding message in the bundle.
If the message in question is a name addressed message, it may be
subject to a secondary destination lookup, and eventually be sent out
on one of the interfaces again. But, since what is perceived as headroom
by the device driver in reality is the last bytes of the preceding
message in the bundle, the latter will be overwritten by the MAC
addresses of the L2 header. If the preceding message has not yet been
consumed by the user, it will evenually be delivered with corrupted
contents.
This commit fixes this by uncloning all messages passing through the
function tipc_msg_lookup_dest(), hence ensuring that the headroom
is always valid when the message is passed on.
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We change the initialization of the skb transmit buffer queues
in the functions tipc_bcast_xmit() and tipc_rcast_xmit() to also
initialize their spinlocks. This is needed because we may, during
error conditions, need to call skb_queue_purge() on those queues
further down the stack.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When gso_size reset to zero for the tail segment in skb_segment(), later
in ipv6_gso_segment(), __skb_udp_tunnel_segment() and gre_gso_segment()
we will get incorrect results (payload length, pcsum) for that segment.
inet_gso_segment() already has a check for gso_size before calculating
payload.
The issue was found with LTP vxlan & gre tests over ixgbe NIC.
Fixes: 07b26c9454 ("gso: Support partial splitting at the frag_list pointer")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit fc922bb0dd ("mlxsw: spectrum_router: Use one LPM tree for
all virtual routers") I increased the scale of supported VRFs by having
all of them share the same LPM tree.
In order to avoid look-ups for prefix lengths that don't exist, each
route removal would trigger an aggregation across all the active virtual
routers to see which prefix lengths are in use and which aren't and
structure the tree accordingly.
With the way the data structures are currently laid out, this is a very
expensive operation. When preformed repeatedly - due to the invocation
of the abort mechanism - and with enough VRFs, this can result in a hung
task.
For now, avoid this optimization until it can be properly re-added in
net-next.
Fixes: fc922bb0dd ("mlxsw: spectrum_router: Use one LPM tree for all virtual routers")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: David Ahern <dsa@cumulusnetworks.com>
Tested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
New GPIO IRQs are allocated and mapped dynamically by default when
GPIO IRQ infrastructure is used by cherryview-pinctrl driver.
This causes issues on some Intel platforms [1][2] with broken BIOS which
hardcodes Linux IRQ numbers in their ACPI tables.
On such platforms cherryview-pinctrl driver should allocate and map all
GPIO IRQs at probe time.
Side effect - "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n"
can be seen at boot log.
NOTE. It still may fail if boot sequence will changed and some interrupt
controller will be probed before cherryview-pinctrl which will shift Linux IRQ
numbering (expected with CONFIG_SPARCE_IRQ enabled).
[1] https://bugzilla.kernel.org/show_bug.cgi?id=194945
[2] https://lkml.org/lkml/2017/9/28/153
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Chris Gorman <chrisjohgorman@gmail.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reported-by: Chris Gorman <chrisjohgorman@gmail.com>
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Chris Gorman <chrisjohgorman@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
while processing Rx = Ry instruction the verifier does
regs[insn->dst_reg] = regs[insn->src_reg]
which often clears write mark (when Ry doesn't have it)
that was just set by check_reg_arg(Rx) prior to the assignment.
That causes mark_reg_read() to keep marking Rx in this block as
REG_LIVE_READ (since the logic incorrectly misses that it's
screened by the write) and in many of its parents (until lucky
write into the same Rx or beginning of the program).
That causes is_state_visited() logic to miss many pruning opportunities.
Furthermore mark_reg_read() logic propagates the read mark
for BPF_REG_FP as well (though it's readonly) which causes
harmless but unnecssary work during is_state_visited().
Note that do_propagate_liveness() skips FP correctly,
so do the same in mark_reg_read() as well.
It saves 0.2 seconds for the test below
program before after
bpf_lb-DLB_L3.o 2604 2304
bpf_lb-DLB_L4.o 11159 3723
bpf_lb-DUNKNOWN.o 1116 1110
bpf_lxc-DDROP_ALL.o 34566 28004
bpf_lxc-DUNKNOWN.o 53267 39026
bpf_netdev.o 17843 16943
bpf_overlay.o 8672 7929
time ~11 sec ~4 sec
Fixes: dc503a8ad9 ("bpf/verifier: track liveness for pruning")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Edward Cree <ecree@solarflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Should be "802.3ad" like everywhere else in the document.
Signed-off-by: Axel Beckert <abe@deuxchevaux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 35e015e1f5 ("ipv6: fix net.ipv6.conf.all interface DAD handlers")
was intended to affect accept_dad flag handling in such a way that
DAD operation and mode on a given interface would be selected
according to the maximum value of conf/{all,interface}/accept_dad.
However, addrconf_dad_begin() checks for particular cases in which we
need to skip DAD, and this check was modified in the wrong way.
Namely, it was modified so that, if the accept_dad flag is 0 for the
given interface *or* for all interfaces, DAD would be skipped.
We have instead to skip DAD if accept_dad is 0 for the given interface
*and* for all interfaces.
Fixes: 35e015e1f5 ("ipv6: fix net.ipv6.conf.all interface DAD handlers")
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Reported-by: Erik Kline <ek@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A couple of serious fixes (use after free and blacklist for WRITE
SAME). One error leg fix (write_pending failure) and one user
experience problem (do not override max_sectors_kb) and one minor
unused function removal.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=X/MK
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
- a couple of serious fixes: use after free and blacklist for WRITE
SAME
- one error leg fix: write_pending failure
- one user experience problem: do not override max_sectors_kb
- one minor unused function removal
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ibmvscsis: Fix write_pending failure path
scsi: libiscsi: Remove iscsi_destroy_session
scsi: libiscsi: Fix use-after-free race during iscsi_session_teardown
scsi: sd: Do not override max_sectors_kb sysfs setting
scsi: sd: Implement blacklist option for WRITE SAME w/ UNMAP
Pull i2c fixes from Wolfram Sang:
"I2C has three driver fixes for the newly introduced drivers and one ID
addition for the i801 driver"
* 'i2c/for-current-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: i2c-stm32f7: make structure stm32f7_setup static const
i2c: ensure termination of *_device_id tables
i2c: i801: Add support for Intel Cedar Fork
i2c: stm32f7: fix setup structure
- Fix driver strength selection when selecting hs400es
- Delete bounce buffer handling:
This change fixes a problem related to how bounce buffers are being
allocated. However, instead of trying to fix that, let's just remove
the mmc bounce buffer code altogether, as it has practically no use.
MMC host:
- meson-gx: A couple of fixes related to clock/phase/tuning
- sdhci-xenon: Fix clock resource by adding an optional bus clock
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=0WJ+
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix driver strength selection when selecting hs400es
- Delete bounce buffer handling:
This change fixes a problem related to how bounce buffers are being
allocated. However, instead of trying to fix that, let's just
remove the mmc bounce buffer code altogether, as it has practically
no use.
MMC host:
- meson-gx: A couple of fixes related to clock/phase/tuning
- sdhci-xenon: Fix clock resource by adding an optional bus clock"
* tag 'mmc-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-xenon: Fix clock resource by adding an optional bus clock
mmc: meson-gx: include tx phase in the tuning process
mmc: meson-gx: fix rx phase reset
mmc: meson-gx: make sure the clock is rounded down
mmc: Delete bounce buffer handling
mmc: core: add driver strength selection when selecting hs400es
Now acking of edge irqs happens the following way:
- omap_gpio_irq_handler
- "isr" = read irq status
- omap_clear_gpio_irqbank(bank, isr_saved & ~level_mask);
^ clear edge status, so irq can be accepted
- loop while "isr"
generic_handle_irq()
- handle_edge_irq()
- desc->irq_data.chip->irq_ack(&desc->irq_data);
- omap_gpio_ack_irq()
it might be that at this moment edge IRQ was triggered again and it will be
cleared and IRQ will be lost.
Use handle_simple_irq and clear edge interrupts early without disabling them in
omap_gpio_irq_handler to avoid loosing interrupts.
[1] https://marc.info/?l=linux-omap&m=149004465313534&w=2
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The skcipher walk interface doesn't handle zero-length input
properly as the old blkcipher walk interface did. This is due
to the fact that the length check is done too late.
This patch moves the length check forward so that it does the
right thing.
Fixes: b286d8b1a6 ("crypto: skcipher - Add skcipher walk...")
Cc: <stable@vger.kernel.org>
Reported-by: Stephan Müller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SCTP program may sleep under a spinlock, and the function call path is:
sctp_generate_t3_rtx_event (acquire the spinlock)
sctp_do_sm
sctp_side_effects
sctp_cmd_interpreter
sctp_make_init_ack
sctp_pack_cookie
crypto_shash_setkey
shash_setkey_unaligned
kmalloc(GFP_KERNEL)
For the same reason, the orinoco driver may sleep in interrupt handler,
and the function call path is:
orinoco_rx_isr_tasklet
orinoco_rx
orinoco_mic
crypto_shash_setkey
shash_setkey_unaligned
kmalloc(GFP_KERNEL)
To fix it, GFP_KERNEL is replaced with GFP_ATOMIC.
This bug is found by my static analysis tool and my code review.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All error handling paths 'goto err_drop_spawn' except this one.
In order to avoid some resources leak, we should do it as well here.
Fixes: f1c131b454 ("crypto: xts - Convert to skcipher")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
gcc warns that the length for the extra unaligned data in the hash
function may be used unaligned. In theory this could happen if
we pass a zero-length sg_list, or if sg_is_last() was never true:
In file included from drivers/crypto/stm32/stm32-hash.c:23:
drivers/crypto/stm32/stm32-hash.c: In function 'stm32_hash_one_request':
include/uapi/linux/kernel.h:12:49: error: 'ncp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
#define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
Neither of these can happen in practice, so the warning is harmless.
However while trying to suppress the warning, I noticed multiple
problems with that code:
- On big-endian kernels, we byte-swap the data like we do for
register accesses, however this is a data stream and almost
certainly needs to use a single writesl() instead of series
of writel() to give the correct hash.
- If the length is not a multiple of four bytes, we skip the
last word entirely, since we write the truncated length
using stm32_hash_set_nblw().
- If we change the code to round the length up rather than
down, the last bytes contain stale data, so it needs some
form of padding.
This tries to address all four problems, by correctly
initializing the length to zero, using endian-safe copy
functions, adding zero-padding and passing the padded length.
I have done no testing on this patch, so please review
carefully and if possible test with an unaligned length
and big-endian kernel builds.
Fixes: 8a1012d3f2 ("crypto: stm32 - Support for STM32 HASH module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- Suspend fix for Samsung Exynos SoCs where we need to keep clks on
across suspend
- Two critical clk markings for clks that shouldn't ever turn off on
Rockchip SoCs
- A fix for a copy-paste mistake on Rockchip rk3128 causing some clks to
touch the same bit and trample over one another
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=jV1S
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
- build fix to export the clk_bulk_prepare() symbol
- suspend fix for Samsung Exynos SoCs where we need to keep clks on
across suspend
- two critical clk markings for clks that shouldn't ever turn off on
Rockchip SoCs
- a fix for a copy-paste mistake on Rockchip rk3128 causing some clks
to touch the same bit and trample over one another
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: samsung: exynos4: Enable VPLL and EPLL clocks for suspend/resume cycle
clk: Export clk_bulk_prepare()
clk: rockchip: add sclk_timer5 as critical clock on rk3128
clk: rockchip: fix up rk3128 pvtm and mipi_24m gate regs error
clk: rockchip: add pclk_pmu as critical clock on rk3128
- Updates for various platforms
- boot log updates for upcoming HS48 family of cores (dual issue)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Lcdb
-----END PGP SIGNATURE-----
Merge tag 'arc-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC udpates from Vineet Gupta:
- updates for various platforms
- boot log updates for upcoming HS48 family of cores (dual issue)
* tag 'arc-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: [plat-hsdk]: Add reset controller node to manage ethernet reset
ARC: [plat-hsdk]: Temporary fix to set CPU frequency to 1GHz
ARC: fix allnoconfig build warning
ARCv2: boot log: identify HS48 cores (dual issue)
ARC: boot log: decontaminate ARCv2 ISA_CONFIG register
arc: remove redundant UTS_MACHINE define in arch/arc/Makefile
ARC: [plat-eznps] Update platform maintainer as Noam left
ARC: [plat-hsdk] use actual clk driver to manage cpu clk
ARC: [*defconfig] Reenable soft lock-up detector
ARC: [plat-axs10x] sdio: Temporary fix of sdio ciu frequency
ARC: [plat-hsdk] sdio: Temporary fix of sdio ciu frequency
ARC: [plat-axs103] Add temporary quirk to reset ethernet IP
Pull block fixes from Jens Axboe:
"A collection of fixes for this series. This contains:
- NVMe pull request from Christoph, one uuid attribute fix, and one
fix for the controller memory buffer address for remapped BARs.
- use-after-free fix for bsg, from Benjamin Block.
- bcache race/use-after-free fix for a list traversal, fixing a
regression in this merge window. From Coly Li.
- null_blk change configfs dependency change from a 'depends' to a
'select'. This is a change from this merge window as well. From me.
- nbd signal fix from Josef, fixing a regression introduced with the
status code changes.
- nbd MAINTAINERS mailing list entry update.
- blk-throttle stall fix from Joseph Qi.
- blk-mq-debugfs fix from Omar, fixing an issue where we don't
register the IO scheduler debugfs directory, if the driver is
loaded with it. Only shows up if you switch through the sysfs
interface"
* 'for-linus' of git://git.kernel.dk/linux-block:
bsg-lib: fix use-after-free under memory-pressure
nvme-pci: Use PCI bus address for data/queues in CMB
blk-mq-debugfs: fix device sched directory for default scheduler
null_blk: change configfs dependency to select
blk-throttle: fix possible io stall when upgrade to max
MAINTAINERS: update list for NBD
nbd: fix -ERESTARTSYS handling
nvme: fix visibility of "uuid" ns attribute
bcache: use llist_for_each_entry_safe() in __closure_wake_up()
- Bring initialisation of user space undefined instruction handling
early (core_initcall) since late_initcall() happens after modprobe in
initramfs is invoked. Similar fix for fpsimd initialisation
- Increase the kernel stack when KASAN is enabled
- Bring the PCI ACS enabling earlier via the
iort_init_platform_devices()
- Fix misleading data abort address printing (decimal vs hex)
-----BEGIN PGP SIGNATURE-----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=Iu63
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Bring initialisation of user space undefined instruction handling
early (core_initcall) since late_initcall() happens after modprobe in
initramfs is invoked. Similar fix for fpsimd initialisation
- Increase the kernel stack when KASAN is enabled
- Bring the PCI ACS enabling earlier via the
iort_init_platform_devices()
- Fix misleading data abort address printing (decimal vs hex)
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Ensure fpsimd support is ready before userspace is active
arm64: Ensure the instruction emulation is ready for userspace
arm64: Use larger stacks when KASAN is selected
ACPI/IORT: Fix PCI ACS enablement
arm64: fix misleading data abort decoding
- fix PPC XIVE interrupt delivery
- fix x86 RCU breakage from asynchronous page faults when built without
PREEMPT_COUNT
- fix x86 build with -frecord-gcc-switches
- fix x86 build without X86_LOCAL_APIC
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJZ18AmAAoJEED/6hsPKofoPEwH+waDVIeS+s38G8HkiB8PoVww
bAhAV6Aj3muOI49KtwBt+qyC8nOQHpwPCNqjmagOv1GEYSwJ4gKKoJ6Xl9rOsxau
GT0xDgVDbrzIb/PTFL+7bDjsyMxf89utIfoBL8i37uznzB35+QFlvy4mLgKntAh0
1/tYDzgrQxuxH5RF4DbFstoPFjw1kdxpXRzHdngsV13bS87PAG9j7A0l7orLtXZg
qxlTh2SvCSr4B0hOZGG/Pc0aIAxLh8kRD6NaU05raKgzQLJa5sxJ0Yr+RbskfqQb
7B98X1Ygb1BjBOFxy+Je5IamKt4ICTY1B0v1ivs0qZ+mgxG59FWuQlR0pww/8Ug=
=ay5S
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
- fix PPC XIVE interrupt delivery
- fix x86 RCU breakage from asynchronous page faults when built without
PREEMPT_COUNT
- fix x86 build with -frecord-gcc-switches
- fix x86 build without X86_LOCAL_APIC
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: add X86_LOCAL_APIC dependency
x86/kvm: Move kvm_fastop_exception to .fixup section
kvm/x86: Avoid async PF preempting the kernel incorrectly
KVM: PPC: Book3S: Fix server always zero from kvmppc_xive_get_xive()
- a fix for iwpm netlink usage
- a fix for error unwinding in mlx5
- two fixes to vlan handling in qedr
- a couple small i40iw fixes
-----BEGIN PGP SIGNATURE-----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=17J/
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"This is a pretty small pull request. Only 6 patches in total. There
are no outstanding -rc patches on the mailing list after this pull
request, so only if some new issues are discovered in the remainder of
the rc cycles will you hear from me again.
Summary:
- a fix for iwpm netlink usage
- a fix for error unwinding in mlx5
- two fixes to vlan handling in qedr
- a couple small i40iw fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
i40iw: Fix port number for query QP
i40iw: Add missing memory barriers
RDMA/qedr: Parse vlan priority as sl
RDMA/qedr: Parse VLAN ID correctly and ignore the value of zero
IB/mlx5: Fix label order in error path handling
RDMA/iwpm: Properly mark end of NL messages
ppp_release() tries to ensure that netdevices are unregistered before
decrementing the unit refcount and running ppp_destroy_interface().
This is all fine as long as the the device is unregistered by
ppp_release(): the unregister_netdevice() call, followed by
rtnl_unlock(), guarantee that the unregistration process completes
before rtnl_unlock() returns.
However, the device may be unregistered by other means (like
ppp_nl_dellink()). If this happens right before ppp_release() calling
rtnl_lock(), then ppp_release() has to wait for the concurrent
unregistration code to release the lock.
But rtnl_unlock() releases the lock before completing the device
unregistration process. This allows ppp_release() to proceed and
eventually call ppp_destroy_interface() before the unregistration
process completes. Calling free_netdev() on this partially unregistered
device will BUG():
------------[ cut here ]------------
kernel BUG at net/core/dev.c:8141!
invalid opcode: 0000 [#1] SMP
CPU: 1 PID: 1557 Comm: pppd Not tainted 4.14.0-rc2+ #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014
Call Trace:
ppp_destroy_interface+0xd8/0xe0 [ppp_generic]
ppp_disconnect_channel+0xda/0x110 [ppp_generic]
ppp_unregister_channel+0x5e/0x110 [ppp_generic]
pppox_unbind_sock+0x23/0x30 [pppox]
pppoe_connect+0x130/0x440 [pppoe]
SYSC_connect+0x98/0x110
? do_fcntl+0x2c0/0x5d0
SyS_connect+0xe/0x10
entry_SYSCALL_64_fastpath+0x1a/0xa5
RIP: free_netdev+0x107/0x110 RSP: ffffc28a40573d88
---[ end trace ed294ff0cc40eeff ]---
We could set the ->needs_free_netdev flag on PPP devices and move the
ppp_destroy_interface() logic in the ->priv_destructor() callback. But
that'd be quite intrusive as we'd first need to unlink from the other
channels and units that depend on the device (the ones that used the
PPPIOCCONNECT and PPPIOCATTACH ioctls).
Instead, we can just let the netdevice hold a reference on its
ppp_file. This reference is dropped in ->priv_destructor(), at the very
end of the unregistration process, so that neither ppp_release() nor
ppp_disconnect_channel() can call ppp_destroy_interface() in the interim.
Reported-by: Beniamino Galvani <bgalvani@redhat.com>
Fixes: 8cb775bc0a ("ppp: fix device unregistration upon netns deletion")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull btrfs fixes from David Sterba:
"Two more fixes for bugs introduced in 4.13.
The sector_t problem with 32bit architecture and !LBDAF config seems
serious but the number of affected deployments is hopefully low.
The clashing status bits could lead to a confusing in-memory state of
the whole-filesystem operations if used with the quota override sysfs
knob"
* 'for-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix overlap of fs_info::flags values
btrfs: avoid overflow when sector_t is 32 bit
DW ethernet controller on HSDK hangs sometimes after SW reset, so
add reset node to make possible to reset DW ethernet controller HW.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Pull overlayfs fixes from Miklos Szeredi:
"Fix a regression in 4.14 and one in 4.13. The latter is a case when
Docker is doing something it really shouldn't and gets away with it.
We now print a warning instead of erroring out.
There are also fixes to several error paths"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fix regression caused by exclusive upper/work dir protection
ovl: fix missing unlock_rename() in ovl_do_copy_up()
ovl: fix dentry leak in ovl_indexdir_cleanup()
ovl: fix dput() of ERR_PTR in ovl_cleanup_index()
ovl: fix error value printed in ovl_lookup_index()
ovl: fix may_write_real() for overlayfs directories
Paul Burton
Takashi Iwai
Shmulik Ladkani
Kelvin Cheung
Matt Redfearn
Jeffy Chen
Kai-Heng Feng
Mathias Krause
Andy Lutomirski
Thomas Gleixner
Greg Kroah-Hartman
Lin Zhang
Johan Hovold
Jon Maloy
Linus Torvalds
Alexey Kodanev
Ido Schimmel
Grygorii Strashko
Alexei Starovoitov
Axel Beckert
Matteo Croce
Herbert Xu
Jia-Ju Bai
Christophe Jaillet
Arnd Bergmann
Guillaume Nault
Eugeniy Paltsev