Hide the DRM midlayer behind CONFIG_DRM_LEGACY, make functions use
the prefix drm_legacy_, and move declarations to drm_legacy.h.
In struct drm_device, move the fields irq and irq_enabled behind
CONFIG_DRM_LEGACY.
All callers have been updated.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-15-tzimmermann@suse.de
For KMS drivers, replace the IRQ check in VBLANK ioctls with a check for
vblank support. IRQs might be enabled wthout vblanking being supported.
This change also removes the DRM framework's only dependency on IRQ state
for non-legacy drivers. For legacy drivers with userspace modesetting,
the original test remains in drm_wait_vblank_ioctl().
v4:
* avoid preprocessor ifdef in drm_wait_vblank_ioctl()
(Jani, Thierry)
v3:
* optimize test in drm_wait_vblank_ioctl() for KMS case (Liviu)
* update docs for drm_irq_uninstall()
v2:
* keep the old test for legacy drivers in
drm_wait_vblank_ioctl() (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-5-tzimmermann@suse.de
drm_vblank_restore() exists because certain power saving states
can clobber the hardware frame counter. The way it does this is
by guesstimating how many frames were missed purely based on
the difference between the last stored timestamp vs. a newly
sampled timestamp.
If we should call this function before a full frame has
elapsed since we sampled the last timestamp we would end up
with a possibly slightly different timestamp value for the
same frame. Currently we will happily overwrite the already
stored timestamp for the frame with the new value. This
could cause userspace to observe two different timestamps
for the same frame (and the timestamp could even go
backwards depending on how much error we introduce when
correcting the timestamp based on the scanout position).
To avoid that let's not update the stored timestamp at all,
and instead we just fix up the last recorded hw vblank counter
value such that the already stored timestamp/seq number will
match. Thus the next time a vblank irq happens it will calculate
the correct diff between the current and stored hw vblank counter
values.
Sidenote: Another possible idea that came to mind would be to
do this correction only if the power really was removed since
the last time we sampled the hw frame counter. But to do that
we would need a robust way to detect when it has occurred. Some
possibilities could involve some kind of hardare power well
transition counter, or potentially we could store a magic value
in a scratch register that lives in the same power well. But
I'm not sure either of those exist, so would need an actual
investigation to find out. All of that is very hardware specific
of course, so would have to be done in the driver code.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210218160305.16711-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I got real badly confused when trying to review a fix from Ville for
this. Let's try to document better what's required for this, and check
the minimal settings at runtime - we can't check ofc that there's
indeed no races in the driver callback.
Also noticed that the drm_vblank_restore version is unused, so lets
unexport that while at it.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209101523.2954281-1-daniel.vetter@ffwll.ch
The explicit out-fences in crtc are signaled as part of vblank event,
indicating all framebuffers present on the Atomic Commit request are
scanned out on the screen. Though the fence signal and the vblank event
notification happens at the same time, triggered by the same hardware
vsync event, the timestamp set in both are different. With drivers
supporting precise vblank timestamp the difference between the two
timestamps would be even higher. This might have an impact on use-mode
frameworks using these fence timestamps for purposes other than simple
buffer usage. For instance, the Android framework [1] uses the
retire-fences as an alternative to vblank when frame-updates are in
progress. Set the fence timestamp during send vblank event using a new
drm_send_event_timestamp_locked variant to avoid discrepancies.
[1] https://android.googlesource.com/platform/frameworks/native/+/master/
services/surfaceflinger/Scheduler/Scheduler.cpp#397
Changes in v2:
- Use drm_send_event_timestamp_locked to update fence timestamp
- add more information to commit text
Changes in v3:
- use same backend helper function for variants of drm_send_event to
avoid code duplications
Changes in v4:
- remove WARN_ON from drm_send_event_timestamp_locked
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Reviewed-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
[sumits: minor parenthesis alignment correction]
Link: https://patchwork.freedesktop.org/patch/msgid/1610757107-11892-2-git-send-email-veeras@codeaurora.org
This means some very few #ifdef in code, but it allows us to
enlist the compiler to make sure this stuff isn't used anymore.
More important, only legacy drivers change drm_device (for the
legacy_dev_list shadow attach management), therefore this is
prep to allow modern drivers to have a const driver struct. Which
is nice, because there's a ton of function pointers in there.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Review-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-2-daniel.vetter@ffwll.ch
The timestamping constants have nothing to do with any legacy state
so should not be updated from
drm_atomic_helper_update_legacy_modeset_state().
Let's make everyone call drm_atomic_helper_calc_timestamping_constants()
directly instead of relying on
drm_atomic_helper_update_legacy_modeset_state() to call it.
@@
expression S;
@@
- drm_atomic_helper_calc_timestamping_constants(S);
@@
expression D, S;
@@
drm_atomic_helper_update_legacy_modeset_state(D, S);
+ drm_atomic_helper_calc_timestamping_constants(S);
v2: Update drm_crtc_vblank_helper_get_vblank_timestamp{,_internal}() docs (Daniel)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907120026.6360-2-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is an ioctl callback, so we're guaranteed to have IRQs enabled when
calling this function. Use the plain _irq() variants of spin_(un)lock()
to make this more obvious.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720190736.180297-6-lyude@redhat.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This one's easy - we're already calling kzalloc(GFP_KERNEL) in this
function, so we must already be guaranteed to have IRQs enabled when
calling this. So, use the plain _irq() variants of spin_(un)lock() to
make this more obvious.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720190736.180297-5-lyude@redhat.com
This function is only ever called from ioctl context, so we're
guaranteed to have interrupts enabled. Stop using the irqsave/irqrestore
variants of spin_(un)lock_irq() to make this more obvious.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720190736.180297-4-lyude@redhat.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is only called from:
* Atomic modesetting hooks
* Module probing routines
* Legacy modesetting hooks
All of which have IRQs enabled, so we can also get rid of
irqsave/restore here to make the IRQ context of this function more
obvious.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720190736.180297-3-lyude@redhat.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
All of the drivers in the kernel tree only call this from one of the
following contexts:
* drm_crtc_funcs->reset
* During initial module load
Since both of these contexts are guaranteed to have interrupts enabled
beforehand, there's no need to use the irqsave/irqrestore variants of
spin_(un)lock(). So, fix this to make the irq context of this function
more obvious.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720190736.180297-2-lyude@redhat.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add some kind of vblank workers. The interface is similar to regular
delayed works, and is mostly based off kthread_work. It allows for
scheduling delayed works that execute once a particular vblank sequence
has passed. It also allows for accurate flushing of scheduled vblank
works - in that flushing waits for both the vblank sequence and job
execution to complete, or for the work to get cancelled - whichever
comes first.
Whatever hardware programming we do in the work must be fast (must at
least complete during the vblank or scanout period, sometimes during the
first few scanlines of the vblank). As such we use a high-priority
per-CRTC thread to accomplish this.
Changes since v7:
* Stuff drm_vblank_internal.h and drm_vblank_work_internal.h contents
into drm_internal.h
* Get rid of unnecessary spinlock in drm_crtc_vblank_on()
* Remove !vblank->worker check
* Grab vbl_lock in drm_vblank_work_schedule()
* Mention self-rearming work items in drm_vblank_work_schedule() kdocs
* Return 1 from drm_vblank_work_schedule() if the work was scheduled
successfully, 0 or error code otherwise
* Use drm_dbg_core() instead of DRM_DEV_ERROR() in
drm_vblank_work_schedule()
* Remove vblank->worker checks in drm_vblank_destroy_worker() and
drm_vblank_flush_worker()
Changes since v6:
* Get rid of ->pending and seqcounts, and implement flushing through
simpler means - danvet
* Get rid of work_lock, just use drm_device->event_lock
* Move drm_vblank_work item cleanup into drm_crtc_vblank_off() so that
we ensure that all vblank work has finished before disabling vblanks
* Add checks into drm_crtc_vblank_reset() so we yell if it gets called
while there's vblank workers active
* Grab event_lock in both drm_crtc_vblank_on()/drm_crtc_vblank_off(),
the main reason for this is so that other threads calling
drm_vblank_work_schedule() are blocked from attempting to schedule
while we're in the middle of enabling/disabling vblanks.
* Move drm_handle_vblank_works() call below drm_handle_vblank_events()
* Simplify drm_vblank_work_cancel_sync()
* Fix drm_vblank_work_cancel_sync() documentation
* Move wake_up_all() calls out of spinlock where we can. The only one I
left was the call to wake_up_all() in drm_vblank_handle_works() as
this seemed like it made more sense just living in that function
(which is all technically under lock)
* Move drm_vblank_work related functions into their own source files
* Add drm_vblank_internal.h so we can export some functions we don't
want drivers using, but that we do need to use in drm_vblank_work.c
* Add a bunch of documentation
Changes since v4:
* Get rid of kthread interfaces we tried adding and move all of the
locking into drm_vblank.c. For implementing drm_vblank_work_flush(),
we now use a wait_queue and sequence counters in order to
differentiate between multiple work item executions.
* Get rid of drm_vblank_work_cancel() - this would have been pretty
difficult to actually reimplement and it occurred to me that neither
nouveau or i915 are even planning to use this function. Since there's
also no async cancel function for most of the work interfaces in the
kernel, it seems a bit unnecessary anyway.
* Get rid of to_drm_vblank_work() since we now are also able to just
pass the struct drm_vblank_work to work item callbacks anyway
Changes since v3:
* Use our own spinlocks, don't integrate so tightly with kthread_works
Changes since v2:
* Use kthread_workers instead of reinventing the wheel.
Cc: Tejun Heo <tj@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Co-developed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-4-lyude@redhat.com
This got me confused for a bit while looking over this code: I had been
planning on adding some blocking function calls into this function, but
seeing the irqsave/irqrestore variants of spin_(un)lock() didn't make it
very clear whether or not that would actually be safe.
So I went ahead and reviewed every single driver in the kernel that uses
this function, and they all fall into three categories:
* Driver probe code
* ->atomic_disable() callbacks
* Legacy modesetting callbacks
All of these will be guaranteed to have IRQs enabled, which means it's
perfectly safe to block here. Just to make things a little less
confusing to others in the future, let's switch over to
spin_lock_irq()/spin_unlock_irq() to make that fact a little more
obvious.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-3-lyude@redhat.com
Since we'll be allocating resources for kthread_create_worker() in the
next commit (which could fail and require us to clean up the mess),
let's simplify the cleanup process a bit by registering a
drm_vblank_init_release() action for each drm_vblank_crtc so they're
still cleaned up if we fail to initialize one of them.
Changes since v3:
* Use drmm_add_action_or_reset() - Daniel Vetter
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-2-lyude@redhat.com
Replace all the WARN_* variants with their drm_WARN counterparts.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200523071224.1716837-3-sam@ravnborg.org
Replace all DRM_* logging functions with their drm_ counterparts.
checkpatch emits a few "quoted string split across lines",
which is left as is. The strings was already split in the original code
base and it would not increase readability to fix them.
v2:
- added braces to if statement (Thomas)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200523071224.1716837-2-sam@ravnborg.org
For historical reasons it's called dev->num_crtcs, which is rather
confusing ever since kms was added. But now we have a nice helper, so
let's use it for better readability!
Only code change is in atomic helpers: vblank support means that
dev->irq_enabled must be set too. Another one of these quirky things
... But since it's implied we can simplify that check.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527111134.1571781-1-daniel.vetter@ffwll.ch
On some architectures like ppc64le and aarch64, compiling with
-Wformat=1 will throw the following warnings:
In file included from drivers/gpu/drm/drm_vblank.c:33:
drivers/gpu/drm/drm_vblank.c: In function 'drm_update_vblank_count':
drivers/gpu/drm/drm_vblank.c:273:16: warning: format '%llu' expects
argument of type 'long long unsigned int', but argument 4 has type
'long int' [-Wformat=]
DRM_DEBUG_VBL("updating vblank count on crtc %u:"
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/drm/drm_print.h:407:22: note: in definition of macro
'DRM_DEBUG_VBL'
drm_dbg(DRM_UT_VBL, fmt, ##__VA_ARGS__)
^~~
drivers/gpu/drm/drm_vblank.c:274:22: note: format string is defined here
" current=%llu, diff=%u, hw=%u hw_last=%u\n",
~~~^
%lu
So, fix that with a typecast.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[fixed too long line]
Link: https://patchwork.freedesktop.org/patch/msgid/20200521204647.2578479-1-lyude@redhat.com
The R-Car DU driver calls drm_vblank_init via some helper functions in
probe(). From what I checked, most drivers do this as well. I have a
config now where DU always stays in deferred_probe state because of a
missing dependency. This means that every time I rebind another driver
like MMC, the vblank init message is displayed again when the DU driver
is retried. Because the message doesn't really carry a useful
information, I suggest to simply drop it.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513201016.23047-1-wsa+renesas@sang-engineering.com
Lyude Paul wrote a very good intro to vblank here:
https://lore.kernel.org/dri-devel/faf63d8a9ed23c16af69762f59d0dca6b2bf085f.camel@redhat.com/T/#mce6480be738160e9d07c5d023e88fd78d7a06d27
Add this to the intro chapter in drm_vblank.c so others
can benefit from it too.
v2:
- Reworded to improve readability (Thomas)
v3:
- Added nice ascii drawing from Lyude (Lyude)
- Added referende to high-precision timestamp (Daniel)
- Improved grammar (Thomas)
- Combined it all and made kernel-doc happy
- Dropped any a-b, r-b do to the amount of changes
v4:
- Add intro to vblank interrupt (Liviu)
- Add historical reference for blanking (Alex)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Co-developed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406194746.26433-2-sam@ravnborg.org
Nothing special here, except that this is the first time that we
automatically clean up something that's initialized with an explicit
driver call. But the cleanup was done at the very end of the release
sequence for all drivers, and that's still the case. At least without
more uses of drmm_ through explicit driver calls.
Also for this one we need drmm_kcalloc, so lets add those.
The motivation here is to allow us to remove the explicit calls to
drm_dev_fini() from all drivers.
v2: Sort includes (Laurent)
v3: Motivate the change in the commit message better (Sam)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-25-daniel.vetter@ffwll.ch
Per-CRTC VBLANK information used to be addressed by device and pipe
index. A call drm_crtc_vblank_helper_get_vblank_timestamp_internal()
receives a pointer to the CRTC instead. Fix the documentation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: f1e2b6371c ("drm: Add get_scanout_position() to struct drm_crtc_helper_funcs")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200303073135.10605-1-tzimmermann@suse.de
The legacy version of get_scanout_position() was only useful while
drivers still used drm_driver.get_scanout_position(). With no such
drivers left, the related typedef and code can be removed
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-23-tzimmermann@suse.de
All non-legacy users of VBLANK functions in struct drm_driver have been
converted to use the respective interfaces in struct drm_crtc_funcs. The
remaining users of VBLANK callbacks in struct drm_driver are legacy drivers
with userspace modesetting.
All users of struct drm_driver.get_scanout_position() have been
converted to the respective CRTC helper function. Remove the callback
from struct drm_driver.
There are no users left of get_vblank_timestamp(), so the callback is
being removed. The other VBLANK callbacks are being moved to the legacy
section at the end of struct drm_driver.
Also removed is drm_calc_vbltimestamp_from_scanoutpos(). Callers of this
function have been converted to use the CRTC instead.
v4:
* more readable code for setting high_prec (Ville, Jani)
v2:
* merge with removal of struct drm_driver.get_scanout_position()
* remove drm_calc_vbltimestamp_from_scanoutpos()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-22-tzimmermann@suse.de
The callback get_vblank_timestamp() is currently located in struct
drm_driver, but really belongs into struct drm_crtc_funcs. Add an
equivalent there. Driver will be converted in separate patches.
The default implementation is drm_calc_vbltimestamp_from_scanoutpos().
The patch adds drm_crtc_vblank_helper_get_vblank_timestamp(), which is
an implementation for the CRTC callback.
v4:
* more readable code for setting high_prec (Ville, Jani)
v3:
* use refactored timestamp calculation to minimize duplicated code
* do more checks for crtc != NULL to support legacy drivers
v2:
* rename helper to drm_crtc_vblank_helper_get_vblank_timestamp()
* replace drm_calc_vbltimestamp_from_scanoutpos() with
drm_crtc_vblank_helper_get_vblank_timestamp() in docs
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-4-tzimmermann@suse.de
The new callback get_scanout_position() reads the current location
of the scanout process. The operation is currently located in struct
drm_driver, but really belongs to the CRTC. Drivers will be converted
in separate patches.
To help with the conversion, the timestamp calculation has been
moved from drm_calc_vbltimestamp_from_scanoutpos() to
drm_crtc_vblank_helper_get_vblank_timestamp_internal(). The helper
function supports the new and old interface of get_scanout_position().
drm_calc_vbltimestamp_from_scanoutpos() remains as a wrapper around
the new function.
Callback functions return the scanout position from the CRTC. The
legacy version of the interface receives the device and pipe index,
the modern version receives a pointer to the CRTC. We keep the
legacy version until all drivers have been converted.
v4:
* 80-character line fixes
v3:
* refactor drm_calc_vbltimestamp_from_scanoutpos() to minimize
code duplication
* define types for get_scanout_position() callbacks
v2:
* fix logical op in drm_calc_vbltimestamp_from_scanoutpos()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-3-tzimmermann@suse.de
VBLANK interrupts can be disabled immediately or with a delay, where the
latter is the default. The former option can be selected by setting
get_vblank_timestamp and enabling vblank_disable_immediate in struct
drm_device. Simplify the code in preparation of the removal of struct
drm_device.get_vblank_timestamp.
v3:
* remove internal setup of vblank_disable_immediate
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-2-tzimmermann@suse.de
At the end of a commit, atomic helpers can generate a fake VBLANK event
automatically. Originally implemented for writeback connectors, the
functionality can be used by any driver and/or hardware without proper
VBLANK interrupt.
The patch updates the documentation to make this behaviour official:
settings struct drm_crtc_state.no_vblank to true enables automatic
generation of fake VBLANK events.
The new interface drm_dev_has_vblank() returns true if vblanking has
been initialized for a device, or false otherwise. Atomic helpers use
this function when initializing no_vblank in the CRTC state in
drm_atomic_helper_check_modeset(). If vblanking has been initialized
for a device, no_blank is disabled. Otherwise it's enabled. Hence,
atomic helpers will automatically send out fake VBLANK events with any
driver that did not initialize vblanking.
v5:
* more precise documentation and commit message
v4:
* replace drm_crtc_has_vblank() with drm_dev_has_vblank()
* add drm_dev_has_vblank() in this patch
* move driver changes into separate patches
v3:
* squash all related changes patches into this patch
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-2-tzimmermann@suse.de
For historical reasons, the function drm_wait_vblank_ioctl always return
-EINVAL if something gets wrong. This scenario limits the flexibility
for the userspace to make detailed verification of any problem and take
some action. In particular, the validation of “if (!dev->irq_enabled)”
in the drm_wait_vblank_ioctl is responsible for checking if the driver
support vblank or not. If the driver does not support VBlank, the
function drm_wait_vblank_ioctl returns EINVAL, which does not represent
the real issue; this patch changes this behavior by return EOPNOTSUPP.
Additionally, drm_crtc_get_sequence_ioctl and
drm_crtc_queue_sequence_ioctl, also returns EINVAL if vblank is not
supported; this patch also changes the return value to EOPNOTSUPP in
these functions. Lastly, these functions are invoked by libdrm, which is
used by many compositors; because of this, it is important to check if
this change breaks any compositor. In this sense, the following projects
were examined:
* Drm-hwcomposer
* Kwin
* Sway
* Wlroots
* Wayland
* Weston
* Mutter
* Xorg (67 different drivers)
For each repository the verification happened in three steps:
* Update the main branch
* Look for any occurrence of "drmCrtcQueueSequence",
"drmCrtcGetSequence", and "drmWaitVBlank" with the command git grep -n
"STRING".
* Look in the git history of the project with the command
git log -S<STRING>
None of the above projects validate the use of EINVAL when using
drmWaitVBlank(), which make safe, at least for these projects, to change
the return values. On the other hand, mesa and xserver project uses
drmCrtcQueueSequence() and drmCrtcGetSequence(); this change is harmless
for both projects.
Change since V5 (Pekka Paalanen):
- Check if the change also affects Mutter
Change since V4 (Daniel):
- Also return EOPNOTSUPP in drm_crtc_[get|queue]_sequence_ioctl
Change since V3:
- Return EINVAL for _DRM_VBLANK_SIGNAL (Daniel)
Change since V2:
Daniel Vetter and Chris Wilson
- Replace ENOTTY by EOPNOTSUPP
- Return EINVAL if the parameters are wrong
Cc: Keith Packard <keithp@keithp.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002140516.adeyj3htylimmlmg@smtp.gmail.com
Add helper to check if a drm debug category is enabled. Convert drm core
to use it. No functional changes.
v2: Move unlikely() to drm_debug_enabled() (Eric)
v3: Keep unlikely() when combined with other conditions (Eric)
Cc: Eric Engestrom <eric@engestrom.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001140614.26909-1-jani.nikula@intel.com
Noticed while reviewing code. I'm not sure whether this might or might
not explain some of the missed vblank hilarity we've been seeing on
various drivers (but those got tracked down to driver issues, at least
mostly). I think those all go through the vblank completion event,
which has unconditional barriers - it always takes the spinlock.
Therefore no cc stable.
v2:
- Barrriers are hard, put them in in the right order (Chris).
- Improve the comments a bit.
v3:
Ville noticed that on 32bit we might be breaking up the load/stores,
now that the vblank counter has been switched over to be 64 bit. Fix
that up by switching to atomic64_t. This this happens so rarely in
practice I figured no need to cc: stable ...
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Keith Packard <keithp@keithp.com>
References: 570e86963a ("drm: Widen vblank count to 64-bits [v3]")
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723131337.22031-1-daniel.vetter@ffwll.ch
Store the timestamp of the current vblank in the new field 'time' of the
vblank trace event. If the timestamp is calculated by a driver that
supports high-precision vblank timing, set the field 'high-prec' to
'true'.
User space can now access actual hardware vblank times via the tracing
infrastructure. Tracing applications (such as GPUVis, see [0] for
related discussion), can use the newly added information to conduct a
more accurate analysis of display timing.
v2 Fix author name (missing last name)
[0] https://github.com/mikesart/gpuvis/issues/30
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Heinrich Fink <heinrich.fink@daqri.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190902142412.27846-2-heinrich.fink@daqri.com
DRM_WAIT_ON() is from the deprecated drm_os_linux header and
the modern replacement is the wait_event_*.
The return values differ, so a conversion is needed to
keep the original interface towards userspace.
Introduced a switch/case to make code obvious.
Analysis from Michel Dänzer:
The waiting condition rely on all relevant places where vblank_count
is modified calls wake_up(&vblank->queue).
drm_handle_vblank():
- Calls wake_up(&vblank->queue)
drm_vblank_enable():
- There is no need here because there can be no sleeping waiters
in the queue, because vblank->enabled == false immediately
terminates any waits.
drm_crtc_accurate_vblank_count():
- This is called from interrupt handlers, at least from
amdgpu_dm.c:dm_pflip_high_irq(). Not sure it needs to wake up
the queue though, the driver should call
drm_(crtc_)_handle_vblank anyway.
drm_vblank_disable_and_save():
- It can be called from an interrupt, via drm_handle_vblank ->
vblank_disable_fn. However, the only place where
drm_vblank_disable_and_save can be called with sleeping waiters
in the queue is in drm_crtc_vblank_off, which wakes up the queue
afterwards (which terminates all waits, because
vblank->enabled == false at this point).
v3:
- Added analysis to changelog from Michel Dänzer
- Moved return result handling inside if (req_seq != seq) (Daniel V)
- Reused more of the former logic - resulting in simpler code
- Dropped Reviewed-by from Sean Paul as this is a new implementation
v2:
- Fix so the case where req_seq equals seq was handled properly
- quick hack to check if IGT became happy
- Only sent to igt, not to dri-devel
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726210658.GA6299@ravnborg.org
Since we are logging all vblank counter updates 30 lines below,
it is also good to have some details whether and how vblank count
difference is calculated.
Signed-off-by: Oleg Vasilev <oleg.vasilev@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613121802.2193-1-oleg.vasilev@intel.com
The use of the drmP.h header file is deprecated.
Remove use from all files in drm/*
so people do not look there and follow a bad example.
Build tested allyesconfig,allmodconfig on x86, arm etc.
Including alpha that is as always more challenging than
the rest.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20190526173535.32701-8-sam@ravnborg.org
On i965gm we need to adjust max_vblank_count dynamically
depending on whether the TV encoder is used or not. To
that end add a per-crtc max_vblank_count that takes
precedence over its device wide counterpart. The driver
can now call drm_crtc_set_max_vblank_count() to configure
the per-crtc value before calling drm_vblank_on().
Also looks like there was some discussion about exynos needing
similar treatment.
v2: Drop the extra max_vblank_count!=0 check for the
WARN(last!=current), will take care of it in i915 code (Daniel)
WARN_ON(!inmodeset) (Daniel)
WARN_ON(dev->max_vblank_count)
Pimp up the docs (Daniel)
Cc: stable@vger.kernel.org
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181127182004.28885-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If the ioctl is not supported on a particular piece of HW/driver
combination, report ENOTSUP (aka EOPNOTSUPP) so that it can be easily
distinguished from both the lack of the ioctl and from a regular invalid
parameter.
v2: Across all the kms ioctls we had a mixture of reporting EINVAL,
ENODEV and a few ENOTSUPP (most where EINVAL) for a failed
drm_core_check_feature(). Update everybody to report ENOTSUPP.
v3: ENOTSUPP is an internal errno! It's value (524) does not correspond
to a POSIX errno, the one we want is ENOTSUP. However,
uapi/asm-generic/errno.h doesn't include ENOTSUP but man errno says
"ENOTSUP and EOPNOTSUPP have the same value on Linux,
but according to POSIX.1 these error values should be
distinct."
so use EOPNOTSUPP as its equivalent.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20180913192050.24812-1-chris@chris-wilson.co.uk
The ioctl arguments are under control of the user and as such we should
resist any temptation to flood the kernel logs with their errors.
Relegate the DRM_ERROR to a DRM_DEBUG so the user has to opt into
hearing of their own mistakes. (One day we will have a small ringbuffer
attached to the task, so that the concerned process can inspect its own
debug info for EINVAL without them being hitting syslog at all.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904115719.24525-1-chris@chris-wilson.co.uk
As a driver write it is not entirely obvious that a reference to
the event e mentioned in the doc can be obtained via
drm_crtc_vblank_get(). Clarify how to obtain the reference.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180807201143.7446-1-stefan@agner.ch
UAPI Changes:
- Query uAPI interface (used for GPU topology information currently)
* Mesa: https://patchwork.freedesktop.org/series/38795/
Driver Changes:
- Increase PSR2 size for CNL (DK)
- Avoid retraining LSPCON link unnecessarily (Ville)
- Decrease request signaling latency (Chris)
- GuC error capture fix (Daniele)
* tag 'drm-intel-next-2018-03-08' of git://anongit.freedesktop.org/drm/drm-intel: (127 commits)
drm/i915: Update DRIVER_DATE to 20180308
drm/i915: add schedule out notification of preempted but completed request
drm/i915: expose rcs topology through query uAPI
drm/i915: add query uAPI
drm/i915: add rcs topology to error state
drm/i915/debugfs: add rcs topology entry
drm/i915/debugfs: reuse max slice/subslices already stored in sseu
drm/i915: store all subslice masks
drm/i915/guc: work around gcc-4.4.4 union initializer issue
drm/i915/cnl: Add Wa_2201832410
drm/i915/icl: Gen11 forcewake support
drm/i915/icl: Add Indirect Context Offset for Gen11
drm/i915/icl: Enhanced execution list support
drm/i915/icl: new context descriptor support
drm/i915/icl: Correctly initialize the Gen11 engines
drm/i915: Assert that the request is indeed complete when signaled from irq
drm/i915: Handle changing enable_fbc parameter at runtime better.
drm/i915: Track whether the DP link is trained or not
drm/i915: Nuke intel_dp->channel_eq_status
drm/i915: Move SST DP link retraining into the ->post_hotplug() hook
...
The Parfait (version 2.1.0) static code analysis tool found the
following NULL pointer derefernce problem.
- drivers/gpu/drm/drm_vblank.c
Null pointer checks were added to return values from calls to
drm_crtc_from_index(). There is a possibility, however minute, that
crtc->index may not be found when trying to find the struct crtc
from it's assigned index given in drm_crtc_init_with_planes().
3 return checks for NULL where added with a call to
WARN_ON(!crtc).
Signed-off-by: Joe Moriarty <joe.moriarty@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220191157.100960-2-joe.moriarty@oracle.com
The HW frame counter can get reset if device enters a low power state after
vblank interrupts were disabled. This messes up any following vblank count
update as a negative diff (huge unsigned diff) is calculated from the HW
frame counter change. We cannot ignore negative diffs altogther as there
could be legitimate wrap arounds. So, allow drivers to update vblank->count
with missed vblanks for the time interrupts were disabled. This is similar
to _crtc_vblank_on() except that vblanks interrupts are not enabled at the
end as this function is expected to be called from the driver
_enable_vblank() vfunc.
v2: drm_crtc_vblank_restore should take crtc as arg. (Chris)
Add docs and sprinkle some asserts.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180203051302.9974-9-dhinakaran.pandiyan@intel.com
Updating vblank counts requires register reads and these reads may not
return meaningful values if the device was in a low power state after
vblank interrupts were last disabled. So, update the count only if vblank
interrupts are enabled. Secondly, this means the registers should be read
before disabling vblank interrupts.
v2: Don't check vblank->enabled outside it's lock (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180203051302.9974-8-dhinakaran.pandiyan@intel.com
Thomas Zimmermann
Cai Huoqing
Ville Syrjälä
Daniel Vetter
Veera Sundaram Sankaran
Sumera Priyadarsini
Lyude Paul
Suraj Upadhyay
Sam Ravnborg
Wolfram Sang
Rodrigo Siqueira
Jani Nikula
Heinrich Fink
Oleg Vasilev
Matt Roper
Chris Wilson
Stefan Agner
Dave Airlie
Joe Moriarty
Dhinakaran Pandiyan
Dhinakaran Pandiyan