GNU GLOBAL (http://www.gnu.org/software/global/) is a source code tagging system
It is really cheap to support it in kbuild system.
Signed-off-by: Jianbin Kang <kjbmail@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
mkuboot.sh: Fail if mkimage is missing
gen_init_cpio: checkpatch fixes
gen_init_cpio: Avoid race between call to stat() and call to open()
modpost: Fix address calculation in reloc_location()
Make fixdep error handling more explicit
checksyscalls: Fix stand-alone usage
modpost: Put .zdebug* section on white list
kbuild: fix interaction of CONFIG_IKCONFIG and KCONFIG_CONFIG
kbuild: export linux/{a.out,kvm,kvm_para}.h on headers_install_all
kbuild: introduce HDR_ARCH_LIST for headers_install_all
headers_install: check exit status of unifdef
gen_init_cpio: remove leading `/' from file names
scripts/genksyms: fix header usage
fixdep: use hash table instead of a single array
If you try to build a kernel with KCONFIG_CONFIG set (to a value
not equal to .config) and that config sets CONFIG_IKCONFIG then the
build will fail with:
make[1]: *** No rule to make target `.config', needed by \
`kernel/config_data.gz'. Stop.
because the kernel/Makefile contains a direct reference to .config.
This issue has been present since the introduction of KCONFIG_CONFIG
in 14cdd3c402.
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
CC: Roman Zippel <zippel@linux-m68k.org>
CC: Michal Marek <mmarek@suse.cz>
Reviewed-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Michal Marek <mmarek@suse.cz>
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
initramfs: Fix build break on symbol-prefixed archs
initramfs: fix initramfs size calculation
initramfs: generalize initramfs_data.xxx.S variants
scripts/kallsyms: Enable error messages while hush up unnecessary warnings
scripts/setlocalversion: update comment
kbuild: Use a single clean rule for kernel and external modules
kbuild: Do not run make clean in $(srctree)
scripts/mod/modpost.c: fix commentary accordingly to last changes
kbuild: Really don't clean bounds.h and asm-offsets.h
Add 'sparc32' ARCH target to test all{yes,mod}config for 32-bit build.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (278 commits)
arm: remove machine_desc.io_pg_offst and .phys_io
arm: use addruart macro to establish debug mappings
arm: return both physical and virtual addresses from addruart
arm/debug: consolidate addruart macros for CONFIG_DEBUG_ICEDCC
ARM: make struct machine_desc definition coherent with its comment
eukrea_mbimxsd-baseboard: Pass the correct GPIO to gpio_free
cpuimx27: fix compile when ULPI is selected
mach-pcm037_eet: fix compile errors
Fixing ethernet driver compilation error for i.MX31 ADS board
cpuimx51: update board support
mx5: add cpuimx51sd module and its baseboard
iomux-mx51: fix GPIO_1_xx 's IOMUX configuration
imx-esdhc: update devices registration
mx51: add resources for SD/MMC on i.MX51
iomux-mx51: fix SD1 and SD2's iomux configuration
clock-mx51: rename CLOCK1 to CLOCK_CCGR for better readability
clock-mx51: factorize clk_set_parent and clk_get_rate
eukrea_mbimxsd: add support for DVI displays
cpuimx25 & cpuimx35: fix OTG port registration in host mode
i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472
...
The config option used by archs to let the build system know that
the C version of the recordmcount works for said arch is currently
called HAVE_C_MCOUNT_RECORD which enables BUILD_C_RECORDMCOUNT. To
be more consistent with the name that all archs may use, it has been
renamed to HAVE_C_RECORDMCOUNT. This will be less confusing since
we are building a C recordmcount and not a mcount_record.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: <linux-arch@vger.kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Cc: John Reiser <jreiser@bitwagon.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds the support for the C version of recordmcount and
compile times show ~ 12% improvement.
After verifying this works, other archs can add:
HAVE_C_MCOUNT_RECORD
in its Kconfig and it will use the C version of recordmcount
instead of the perl version.
Cc: <linux-arch@vger.kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Cc: John Reiser <jreiser@bitwagon.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
base patch to implement 'jump labeling'. Based on a new 'asm goto' inline
assembly gcc mechanism, we can now branch to labels from an 'asm goto'
statment. This allows us to create a 'no-op' fastpath, which can subsequently
be patched with a jump to the slowpath code. This is useful for code which
might be rarely used, but which we'd like to be able to call, if needed.
Tracepoints are the current usecase that these are being implemented for.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jason Baron <jbaron@redhat.com>
LKML-Reference: <ee8b3595967989fdaf84e698dc7447d315ce972a.1284733808.git.jbaron@redhat.com>
[ cleaned up some formating ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With current gcc, compiling with both -pg and -fomit-frame-pointer is
not allowed. However, -pg can be used to build without actually
specifying -fno-omit-frame-pointer, upon which the default behaviour
for the target will be used.
On ARM, it is not possible to build a Thumb-2 kernel with
-fno-omit-frame-pointer (FRAME_POINTERS depends on !THUMB2_KERNEL). In
order to support ftrace for Thumb-2, we need to be able to allow a
combination of FUNCTION_TRACER and !FRAME_POINTER. We do this by
omitting -fomit-frame-pointer if ftrace is enabled.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
setlocalversion: Ignote SCMs above the linux source tree
makefile: not need to regenerate kernel.release file when make kernelrelease
fixes for using make 3.82
kconfig: fix segfault when detecting recursive dependency
kconfig: fix savedefconfig with choice marked optional
Brice reported that 'kernelrelease' has a dependence on include/config/kernel.release,
causes this file to be regenerated every time when invoke it. It doesn't have to.
Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
setlocalversion: fix version for untaged nontip mercurial revs
Fix CONFIG_CROSS_COMPILE issue in .config
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (162 commits)
tracing/kprobes: unregister_trace_probe needs to be called under mutex
perf: expose event__process function
perf events: Fix mmap offset determination
perf, powerpc: fsl_emb: Restore setting perf_sample_data.period
perf, powerpc: Convert the FSL driver to use local64_t
perf tools: Don't keep unreferenced maps when unmaps are detected
perf session: Invalidate last_match when removing threads from rb_tree
perf session: Free the ref_reloc_sym memory at the right place
x86,mmiotrace: Add support for tracing STOS instruction
perf, sched migration: Librarize task states and event headers helpers
perf, sched migration: Librarize the GUI class
perf, sched migration: Make the GUI class client agnostic
perf, sched migration: Make it vertically scrollable
perf, sched migration: Parameterize cpu height and spacing
perf, sched migration: Fix key bindings
perf, sched migration: Ignore unhandled task states
perf, sched migration: Handle ignored migrate out events
perf: New migration tool overview
tracing: Drop cpparg() macro
perf: Use tracepoint_synchronize_unregister() to flush any pending tracepoint call
...
Fix up trivial conflicts in Makefile and drivers/cpufreq/cpufreq.c
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
scripts/dtc: Fix a resource leak
Documentation: fix ubuntu distro name
MAINTAINERS: Update kbuild git URLs
Add support for the C variable in the coccicheck script
Add scripts/coccinelle/deref_null.cocci
Add scripts/coccinelle/err_cast.cocci
Add scripts/coccinelle/resource_size.cocci
Add scripts/coccinelle/alloc/kzalloc-simple.cocci
Add scripts/coccinelle/alloc/drop_kmalloc_cast.cocci
Add Documentation/coccinelle.txt
Add a target to use the Coccinelle checker
scripts: decodecode: remove bashisms
Makefile: clarify a comment
checkkconfigsymbols.sh: Kconfig symbols sometimes have lowercase letters
scripts: add nconf into gitignore file
It is now possible to assign options to AS and CC
on the command line - which is only used for built-in code.
{A,C}FLAGS_KERNEL was used both in the top-level Makefile
in the arch makefiles, thus users had no way to specify
additional options to AS, CC without overriding
the original value.
Introduce a new set of variables KBUILD_{A,C}FLAGS_KERNEL
that is used by arch specific files and free up
{A,C}FLAGS_KERNEL so they can be assigned on
the command line.
All arch Makefiles that used the old variables has been updated.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
It is now possible to assign options to AS, CC and LD
on the command line - which is only used when building modules.
{A,C,LD}FLAGS_MODULE was all used both in the top-level Makefile
in the arch makefiles, thus users had no way to specify
additional options to AS, CC, LD when building modules
without overriding the original value.
Introduce a new set of variables KBUILD_{A,C,LD}FLAGS_MODULE
that is used by arch specific files and free up
{A,C,LD}FLAGS_MODULE so they can be assigned on
the command line.
All arch Makefiles that used the old variables has been updated.
Note: Previously we had a MODFLAGS variable for both
AS and CC. But in favour of consistency this was dropped.
So in some cases arch Makefile has one assignmnet replaced by
two assignmnets.
Note2: MODFLAGS was not documented and is dropped
without any notice. I do not expect much/any breakage
from this.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin]
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [avr32]
Signed-off-by: Michal Marek <mmarek@suse.cz>
Newer gcc has a -femit-struct-debug-baseonly option that dramatically
reduces the size of object files with debug info. What it does
is to only emit type information for structures when the structures
are defined in the same file or in a header file.
This means the type information for most headers are not included.
This is not good when the type information is actually
needed (e.g. with kgdb or systemtap)
But often kernel hackers only care about line numbers and don't
need all the type information anyways. In this case setting
the option can be a big win:
A build dir for a specific x86-64 configuration with gcc 4.5
shrunk from 2.3G to 1.2G. The compilation was also nearly a minute
faster.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
[mmarek: reformatted help text]
Signed-off-by: Michal Marek <mmarek@suse.cz>
Commit 0a564b2 broke LOCALVERSION for O=... builds. Ouch.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-and-tested-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Peter Anvin <hpa@zytor.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
kbuild: Propagate LOCALVERSION= down to scripts/setlocalversion
kbuild: Clean up and speed up the localversion logic
Variables given on the make commandline are not exported to $(shell
...) commands, so run the setlocalversion script in the make rule
directly.
Signed-off-by: Michal Marek <mmarek@suse.cz>
After commit 85a256d8e0, 'make kernelrelease'
doesn't show the correct full kernel version. This patch fixes it,
'make kernelrelease' will show the same version name with the one
you finally get.
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Amerigo Wang <amwang@redhat.com>
[mmarek: merged with 0915512 and added dependency on
include/config/kernel.release]
Signed-off-by: Michal Marek <mmarek@suse.cz>
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
kbuild: fix LOCALVERSION handling to match description
kbuild: Fix modpost segfault
Now that we run scripts/setlocalversion during every build, it makes
sense to move all the localversion logic there. This cleans up the
toplevel Makefile and also makes sure that the script is called only
once in 'make prepare' (previously, it would be called every time due to
a variable expansion in an ifneq statement). No user-visible change is
intended, unless one runs the setlocalversion script directly.
Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
In the commit below the version string handling was modified, adding
a '+' where no other version information was supplied:
commit 85a256d8e0
Author: David Rientjes <rientjes@google.com>
Date: Wed Jan 13 13:01:05 2010 -0800
From the commit the intent was as below:
- when CONFIG_LOCALVERSION_AUTO is disabled, a `+' is appended if the
repository has been revised beyond a tagged commit and LOCALVERSION=
was not passed to "make".
However if the user supplies an empty LOCALVERSION on the command line
the plus suffix is still added. This form is useful in the case where
the build environment knows that the version as specified is correct and
complete but does not correspond to a specific tag.
This patch changes the implementation to match the documentation
such that specifying LOCALVERSION= on the build line is sufficient
to suppress any suffix.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
A 'coccicheck' target is added. It can be called with four different
modes. Each one generates a different kind of output, i.e. context,
patch, org, report, according to the corresponding mode to be
activated.
The new target calls the 'coccicheck' front-end in the 'scripts'
directory with the MODE argument. Every SmPL file in the
subdirectories of 'scripts/coccinelle' is then given to the front-end
and applied to the entire source tree.
The four modes behave as follows:
'report' generates a list in the following format:
file:line:column-column: message
'patch' proposes a fix, when possible.
'context' highlights lines of interest and their context in a
diff-like style. Lines of interest are indicated with '-'.
'org' generates a report in the Org mode format of Emacs.
Signed-off-by: Nicolas Palix <npalix@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Generating the file in make modules_install was broken as well, because
it didn't work in a readonly filesystem and otherwise it generated a
root-owned file which is not wanted.
Reported-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Michal Marek <mmarek@suse.cz>
So that we don't require that the kernel be configured first, and as we
don't use KERNELRELEASE at all in the -src-pkg targets, we need o add a
new wildcard for targets ending in src-pkg:
On a make mrproper'ed kernel we get this without this patch:
[linux-2.6-tip]$ LANG= make perf-tarbz2-src-pkg
/bin/sh: include/config/kernel.release: No such file or directory
make: *** [include/config/kernel.release] Error 1
[acme@emilia linux-2.6-tip]$
Acked-by: Michal Marek <mmarek@suse.cz>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20100604173552.GA875@ghostprotocols.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Useful for when people want to try some version of the perf tools and don't
wants to download the kernel tarball.
Here is a session using this new target:
[root@emilia linux-2.6-tip]# make help | grep -i perf
perf-tar-src-pkg - Build perf-2.6.35-rc1.tar source tarball
perf-targz-src-pkg - Build perf-2.6.35-rc1.tar.gz source tarball
perf-tarbz2-src-pkg - Build perf-2.6.35-rc1.tar.bz2 source tarball
[root@emilia linux-2.6-tip]# make perf-tarbz2-src-pkg
TAR
[root@emilia linux-2.6-tip]# ls -la perf-2.6.35-rc1.tar.bz2
-rw-r--r-- 1 root root 295731 May 31 11:18 perf-2.6.35-rc1.tar.bz2
[root@emilia linux-2.6-tip]# tar xf perf-2.6.35-rc1.tar.bz2
[root@emilia linux-2.6-tip]# cd perf-2.6.35-rc1
[root@emilia perf-2.6.35-rc1]# ls
arch HEAD include lib tools
[root@emilia perf-2.6.35-rc1]# cd tools/perf
[root@emilia perf]# make -j9 2>&1 | tail
CC arch/x86/util/dwarf-regs.o
CC util/probe-finder.o
CC util/newt.o
CC util/scripting-engines/trace-event-perl.o
CC scripts/perl/Perf-Trace-Util/Context.o
CC perf.o
CC builtin-help.o
AR libperf.a
LINK perf
rm .perf.dev.null
[root@emilia perf]# ./perf record -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.262 MB perf.data (~11457 samples) ]
[root@emilia perf]# ./perf report | head -12
# Events: 6K cycles
#
# Overhead Command Shared Object Symbol
# ........ ............... .................. ......
#
4.73% perf [kernel.kallsyms] [k] format_decode
4.49% perf libc-2.12.so [.] _IO_file_underflow_internal
4.38% init [kernel.kallsyms] [k] mwait_idle
3.29% perf [kernel.kallsyms] [k] vsnprintf
2.38% init [kernel.kallsyms] [k] sched_clock_local
2.35% init [kernel.kallsyms] [k] apic_timer_interrupt
1.86% sirq-timer/5 [kernel.kallsyms] [k] find_busiest_group
[root@emilia perf]#
Acked-by: Michal Marek <mmarek@suse.cz>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20100528185357.GA28009@ghostprotocols.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
os user <gnusercn@gmail.com> writes:
From the last comment, arch makefile will override vmlinux. It seems
vmlinux will not be checked by `make'. But from my test, although
`all:' will be re-defined in arch Makefile (ARM arch), vmlinux will
still be checked and the commands associated will be executed. Should
we use another word instead of "overridden"?
Reported-by: os user <gnusercn@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
* 'for-35' of git://repo.or.cz/linux-kbuild: (81 commits)
kbuild: Revert part of e8d400a to resolve a conflict
kbuild: Fix checking of scm-identifier variable
gconfig: add support to show hidden options that have prompts
menuconfig: add support to show hidden options which have prompts
gconfig: remove show_debug option
gconfig: remove dbg_print_ptype() and dbg_print_stype()
kconfig: fix zconfdump()
kconfig: some small fixes
add random binaries to .gitignore
kbuild: Include gen_initramfs_list.sh and the file list in the .d file
kconfig: recalc symbol value before showing search results
.gitignore: ignore *.lzo files
headerdep: perlcritic warning
scripts/Makefile.lib: Align the output of LZO
kbuild: Generate modules.builtin in make modules_install
Revert "kbuild: specify absolute paths for cscope"
kbuild: Do not unnecessarily regenerate modules.builtin
headers_install: use local file handles
headers_check: fix perl warnings
export_report: fix perl warnings
...
I'm looking Makefile in the -mm branch (dated 2010-04-28-16-53) and
seeing what looks like a bug in the checking of scm-identifier. The
"ifneq ($scm-identifier)" seems to always execute "ifeq
($(LOCALVERSION,)) ...". This patch fixes the checking of
scm-identifier.
Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The previous approach didn't work if one did
make modules && make modules_install
Add modules.builtin as dependency of _modinst_, which is the target that
actually needs the file.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Only regenerate it if the configuration has changed. Also, do this after
the modules build to fix errors with some weird Makefiles that are
generated during build.
Reported-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Better dwarf2 unwind information is a good thing, it allows better
debugging with kgdb and crash and helps systemtap.
Commit 003086497f ("Build with
-fno-dwarf2-cfi-asm") disabled some CFI information globally to work
around a module loader bug on powerpc.
But this disables the better unwind tables for all architectures, not just
powerpc. Move the workaround to powerpc and also add a suitable comment
that's it really a workaround.
This improves dwarf2 unwind tables on x86 at least.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The LOCALVERSION= string passed to "make" will now always be appended to
the kernel version after CONFIG_LOCALVERSION, if it exists, regardless of
whether CONFIG_LOCALVERSION_AUTO is set or not. This allows users to
uniquely identify their kernel builds with a string.
If CONFIG_LOCALVERSION_AUTO is enabled, the unique SCM tag reported by
setlocalversion (or .scmversion) is appended to the kernel version, if it
exists. When CONFIG_LOCALVERSION_AUTO is not enabled, a `+' is appended
to the kernel version to represent that the kernel has been revised since
the last release unless "make LOCALVERSION=" was used to uniquely identify
the build.
The end result is this:
- when LOCALVERSION= is passed to "make", it is appended to the kernel
version,
- when CONFIG_LOCALVERSION_AUTO is enabled, a unique SCM identifier is
appended if the respository has been revised beyond a tagged commit,
and
- when CONFIG_LOCALVERSION_AUTO is disabled, a `+' is appended if the
repository has been revised beyond a tagged commit and LOCALVERSION=
was not passed to "make".
Examples:
With CONFIG_LOCALVERSION_AUTO: "make" results in
v2.6.32-rc4-00149-ga3ccf63. If there are uncommited changes to the
respository, it results in v2.6.32-rc4-00149-ga3ccf63-dirty. If
"make LOCALVERSION=kbuild" were used, it results in
v2.6.32-rc4-kbuild-00149-ga3ccf63-dirty.
Without CONFIG_LOCALVERSION_AUTO, "make" results in v2.6.32-rc4+
unless the repository is at the Linux v2.6.32-rc4 commit (in which
case the version would be v2.6.32-rc4). If "make LOCALVERSION=kbuild"
were used, it results in v2.6.32-rc4-kbuild.
Also renames variables such as localver-auto and _localver-auto to more
accurately describe what they represent: localver-extra and
scm-identifier, respectively.
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This adds CROSS_COMPILE as a kconfig string so you can store it in
.config. Then you can use plain "make" in the configured kernel build
directory to do the right cross compilation without setting the
command-line or environment variable every time.
With this, you can set up different build directories for different kernel
configurations, whether native or cross-builds, and then use the simple:
make -C /build/dir M=module-source-dir
idiom to build modules for any given target kernel, indicating which one
by nothing but the build directory chosen.
I tried a version that defaults the string with env="CROSS_COMPILE" so
that in a "make oldconfig" with CROSS_COMPILE in the environment you can
just hit return to store the way you're building it. But the kconfig
prompt for strings doesn't give you any way to say you want an empty
string instead of the default, so I punted that.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Anibal Monsalve Salazar <anibal@debian.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Setting LC_CTYPE=C breaks localized messages in some setups. With only
LC_COLLATE=C and LC_NUMERIC=C, we get almost all we need, except for not
so defined character classes and tolower()/toupper(). The former is not
a big issue, because we can assume that e.g. [:alpha:] will always
include a-zA-Z and we only ever process ASCII input. The latter seems
only affect arch/sh/tools/gen-mach-types, which we can handle separately.
So after this patch the meaning of ranges like [a-z], the behavior of
sort and join, etc. should be the same everywhere and at the same time
gcc should be able to print localized waring and error messages.
LC_NUMERIC=C might not be necessary, but setting it doesn't hurt.
Reported-by: Simon Horman <horms@verge.net.au>
Reported-by: Sergei Trofimovich <slyfox@inbox.ru>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Tested-by: Simon Horman <horms@verge.net.au>
Tested-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, irq: Allow 0xff for /proc/irq/[n]/smp_affinity on an 8-cpu system
Makefile: Unexport LC_ALL instead of clearing it
x86: Fix objdump version check in arch/x86/tools/chkobjdump.awk
x86: Reenable TSC sync check at boot, even with NONSTOP_TSC
x86: Don't use POSIX character classes in gen-insn-attr-x86.awk
Makefile: set LC_CTYPE, LC_COLLATE, LC_NUMERIC to C
x86: Increase MAX_EARLY_RES; insufficient on 32-bit NUMA
x86: Fix checking of SRAT when node 0 ram is not from 0
x86, cpuid: Add "volatile" to asm in native_cpuid()
x86, msr: msrs_alloc/free for CONFIG_SMP=n
x86, amd: Get multi-node CPU info from NodeId MSR instead of PCI config space
x86: Add IA32_TSC_AUX MSR and use it
x86, msr/cpuid: Register enough minors for the MSR and CPUID drivers
initramfs: add missing decompressor error check
bzip2: Add missing checks for malloc returning NULL
bzip2/lzma/gzip: pre-boot malloc doesn't return NULL on failure
Apparently not all versions of glibc and utilities treat an empty
LC_ALL as nonexistent, causing error messages to be garbled. Instead,
explicitly unexport it from the environment.
Reported-and-tested-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <4B2AC394.4030108@redhat.com>
Cc: Michal Marek <mmarek@sues.cz>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
There are a number of common Unix constructs like character ranges in
grep/sed/awk which don't work as expected with LC_COLLATE set to other
than C. Similarly, set LC_CTYPE and LC_NUMERIC to C to avoid other
nasty surprises.
In order to make sure these actually take effect we also have to
clear LC_ALL.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Michal Marek <mmarek@sues.cz>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Roland Dreier <rdreier@cisco.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <4B2A1761.4070904@suse.cz>
To make it easier for module-init-tools and scripts like mkinitrd to
distinguish builtin and missing modules, install a modules.builtin file
listing all builtin modules. This is done by generating an additional
config file (tristate.conf) with tristate options set to uppercase 'Y'
or 'M'. If we source that config file, the builtin modules appear in
obj-Y.
Signed-off-by: Michal Marek <mmarek@suse.cz>
The toplevel Makefile creates the directory if it runs silentoldconfig
automatically, but if run manually, it fails:
$ make mrproper
$ make defconfig && make silentoldconfig
*** Default configuration is based on 'x86_64_defconfig'
#
# configuration written to .config
#
scripts/kconfig/conf -s arch/x86/Kconfig
*** Error during update of the kernel configuration.
...
Move the mkdir command to the silentoldconfig target to make it work.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Drop Module.markers from cleaning list since marker
is removed.
Signed-off-by: Wenji Huang <wenji.huang@oracle.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
We no longer use this directory for generated files and
all architectures has moved their header files so no
symlink tricks are needed either.
Drop the symlink and drop the ARCH check.
If we really need to check that the SRCARCH has not changed
when we build a kernel we can add this check back - but then we will
find a more convenient way to store the info.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
No architectures uses include/asm-$ARCH now.
So drop check for location of include files
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
There is no longer any use of the include2/ directory.
The generated files has moved to include/generated.
Drop all references to said directory.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The simplest method was to add an extra asm-offsets.h
file in arch/$ARCH/include/asm that references the generated file.
We can now migrate the architectures one-by-one to reference
the generated file direct - and when done we can delete the
temporary arch/$ARCH/include/asm/asm-offsets.h file.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The namespace used in arch/$ARCH/include is different from
what is used in include/ except for the include/asm directory.
This patch gives the arch/$ARCH/include/asm directory priority
over include/asm.
When we add asm-offsets.h to arch/$ARCH/include/asm/ this
patch makes sure we pick up the arch specific version
and not the one we have in include/asm.
The situation with an asm-offsets.h file located in
both include/asm _and_ arch/$ARCH/include/asm will happen
when we move more files over to include/generated.
This happens because in some cases it is not practical
to rename all users so we simply add a file
in arch/$ARCH/include/asm that includes the generated version.
This is the solution we use for asm-offsets.h as an example.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michal Marek <mmarek@suse.cz>
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (40 commits)
tracing: Separate raw syscall from syscall tracer
ring-buffer-benchmark: Add parameters to set produce/consumer priorities
tracing, function tracer: Clean up strstrip() usage
ring-buffer benchmark: Run producer/consumer threads at nice +19
tracing: Remove the stale include/trace/power.h
tracing: Only print objcopy version warning once from recordmcount
tracing: Prevent build warning: 'ftrace_graph_buf' defined but not used
ring-buffer: Move access to commit_page up into function used
tracing: do not disable interrupts for trace_clock_local
ring-buffer: Add multiple iterations between benchmark timestamps
kprobes: Sanitize struct kretprobe_instance allocations
tracing: Fix to use __always_unused attribute
compiler: Introduce __always_unused
tracing: Exit with error if a weak function is used in recordmcount.pl
tracing: Move conditional into update_funcs() in recordmcount.pl
tracing: Add regex for weak functions in recordmcount.pl
tracing: Move mcount section search to front of loop in recordmcount.pl
tracing: Fix objcopy revision check in recordmcount.pl
tracing: Check absolute path of input file in recordmcount.pl
tracing: Correct the check for number of arguments in recordmcount.pl
...
* 'hostprogs-wmissing-prototypes' of git://git.kernel.org/pub/scm/linux/kernel/git/josh/linux-misc:
Makefile: Add -Wmising-prototypes to HOSTCFLAGS
oss: Mark loadhex static in hex2hex.c
dtc: Mark various internal functions static
dtc: Set "noinput" in the lexer to avoid an unused function
drm: radeon: Mark several functions static in mkregtable
arch/sparc/boot/*.c: Mark various internal functions static
arch/powerpc/boot/addRamDisk.c: Mark several internal functions static
arch/alpha/boot/tools/objstrip.c: Mark "usage" static
Documentation/vm/page-types.c: Declare checked_open static
genksyms: Mark is_reserved_word static
kconfig: Mark various internal functions static
kconfig: Make zconf.y work with current bison
If the user has an older version of objcopy, that can not handle
converting local symbols to global and vice versa, then some
functions will not be part of the dynamic function tracer. The current
code in recordmcount.pl will print a warning in this case. Unfortunately,
there exists lots of files that may have this issue with older objcopys
and this will cause a warning for every file compiled with this
issue.
This patch solves this overwhelming output by creating a
.tmp_quiet_recordmcount file on the first instance the warning is
encountered. The warning will not print if this file exists.
The temp file is deleted at the beginning of the compile to ensure that
the warning will happen once again on new compiles (because the issue
is still present).
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that all host programs use static for all private functions and
forward prototypes for all extern functions, add -Wmissing-prototypes to
HOSTCFLAGS in the hopes of keeping it that way.
All versions of GCC supported by the kernel handle -Wmissing-prototypes.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
kbuild: revert "save ARCH & CROSS_COMPILE ..."
warn about use of uninstalled kernel headers
kbuild: mkcompile_h: trivial cleanups
kbuild: fix warning when domainname is not available
kbuild: Fix size_append issue for bzip2/lzma kernel
kbuild,scripts: use non-builtin echo for '-e'
kbuild: fix the binrpm-pkg target to work with KBUILD_OUTPUT set
Revert commit 575543347b
It caused following issues:
- On architectures where ARCH= setting is used to select between
32 and 64 bit this was no longer possible without "make mrproper"
- If ARCH was changed then kbuild refused to run "make mrproper"
because ARCH had changed
- When CROSS_COMPILE was changed people were asked to run "make mrproper"
but kbuild refused to run "make mrproper" because CROSS_COMPILE changed.
- Spaces in CROSS_COMPILE was not 'supported'
- If an non-existing ARCH= was used kbuild could get stuck
Lessons learned:
. Despite being simple and straghtforward people uses very different
approaches when building the kernel.
. CROSS_COMPILE is sometimes used for ccache despite cache being
only a CC frontend so one would have expected CC to be
used for this purpose.
. And obviously this was not tested widely enough.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
I'm skipping -rc2 because the -rc1 Makefile mistakenly said -rc2, so in
order to avoid confusion, I'm jumping from -rc1 to -rc3. That way, when
'uname' (or an oops report) says 2.6.32-rc2, there's no confusion about
whether people perhaps meant -rc1 or -rc2.
Albin Tonnerre <albin.tonnerre@free-electrons.com> reported:
Bash 4 filters out variables which contain a dot in them.
This happends to be the case of CPPFLAGS_vmlinux.lds.
This is rather unfortunate, as it now causes
build failures when using SHELL=/bin/bash to compile,
or when bash happens to be used by make (eg when it's /bin/sh)
Remove the common definition of CPPFLAGS_vmlinux.lds by
pushing relevant stuff to either Makefile.build or the
arch specific kernel/Makefile where we build the linker script.
This is also nice cleanup as we move the information out where
it is used.
Notes for the different architectures touched:
arm - we use an already exported symbol
cris - we use a config symbol aleady available
[Not build tested]
mips - the jiffies complexity has moved to vmlinux.lds.S where we need it.
Added a few variables to CPPFLAGS - they are only used by
the linker script.
[Not build tested]
powerpc - removed assignment that is not needed
[not build tested]
sparc - simplified it using $(BITS)
um - introduced a few new exported variables to deal with this
xtensa - added options to CPP invocation
[not build tested]
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The upcomming gcc 4.5 has a new -fconserve-stack option that tells the
inliner to take stack frame size in account. Set it if the compiler
supports it.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The new alternative `gold' linker in recent binutils doesn't support
the -X option. This breaks allyesconfig builds that have
CONFIG_STRIP_ASM_SYMS enabled. Check if the linker really supports
the option using ld-option.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
ld-option is misnamed as it test options to gcc, not to ld.
Renamed it to reflect this.
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
When building a kernel for a different architecture
kbuild requires the user always to specify ARCH and
CROSS_COMPILE on the command-line.
We use the asm symlink to detect if user forgets to
specify the correct ARCH value - but that symlink
is about to die. And we do now want to loose this check.
This patch save the settings of ARCH and CROSS_COMPILE
in two files named:
include/generated/kernel.arch
include/generated/kernel.cross
The settings are saved during "make *config" time
and always read.
If user try to change the settings we error out.
This works both for plain builds and for O=...
builds.
So now you can do:
$ mkdir sparc64
$ make O=sparc64 ARCH=sparc64 CROSS_COMPILE=sparc64-linux- defconfig
$ cd sparc64
$ make
Notice that you no longer need to tell kbuild
the settings of ARCH and CROSS_COMPILE when you type make
in the output directory.
Likewise for plain builds where you do not use O=...
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roland McGrath <roland@redhat.com>
Replace the use of CROSS_COMPILE to select a customized
installkernel script with the possibility to set INSTALLKERNEL
to select a custom installkernel script when running make:
make INSTALLKERNEL=arm-installkernel install
With this patch we are now more consistent across
different architectures - they did not all support use
of CROSS_COMPILE.
The use of CROSS_COMPILE was a hack as this really belongs
to gcc/binutils and the installkernel script does not change
just because we change toolchain.
The use of CROSS_COMPILE caused troubles with an upcoming patch
that saves CROSS_COMPILE when a kernel is built - it would no
longer be installable.
[Thanks to Peter Z. for this hint]
This patch undos what Ian did in commit:
0f8e2d62fa
("use ${CROSS_COMPILE}installkernel in arch/*/boot/install.sh")
The patch has been lightly tested on x86 only - but all changes
looks obvious.
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin]
Acked-by: Russell King <linux@arm.linux.org.uk> [arm]
Acked-by: Paul Mundt <lethal@linux-sh.org> [sh]
Acked-by: "H. Peter Anvin" <hpa@zytor.com> [x86]
Cc: Ian Campbell <icampbell@arcom.com>
Cc: Tony Luck <tony.luck@intel.com> [ia64]
Cc: Fenghua Yu <fenghua.yu@intel.com> [ia64]
Cc: Hirokazu Takata <takata@linux-m32r.org> [m32r]
Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Kyle McMartin <kyle@mcmartin.ca> [parisc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> [powerpc]
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390]
Cc: Thomas Gleixner <tglx@linutronix.de> [x86]
Cc: Ingo Molnar <mingo@redhat.com> [x86]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (46 commits)
powerpc64: convert to dynamic percpu allocator
sparc64: use embedding percpu first chunk allocator
percpu: kill lpage first chunk allocator
x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA
percpu: update embedding first chunk allocator to handle sparse units
percpu: use group information to allocate vmap areas sparsely
vmalloc: implement pcpu_get_vm_areas()
vmalloc: separate out insert_vmalloc_vm()
percpu: add chunk->base_addr
percpu: add pcpu_unit_offsets[]
percpu: introduce pcpu_alloc_info and pcpu_group_info
percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward
percpu: add @align to pcpu_fc_alloc_fn_t
percpu: make @dyn_size mandatory for pcpu_setup_first_chunk()
percpu: drop @static_size from first chunk allocators
percpu: generalize first chunk allocator selection
percpu: build first chunk allocators selectively
percpu: rename 4k first chunk allocator to page
percpu: improve boot messages
percpu: fix pcpu_reclaim() locking
...
Fix trivial conflict as by Tejun Heo in kernel/sched.c
Conflicts:
arch/sparc/kernel/smp_64.c
arch/x86/kernel/cpu/perf_counter.c
arch/x86/kernel/setup_percpu.c
drivers/cpufreq/cpufreq_ondemand.c
mm/percpu.c
Conflicts in core and arch percpu codes are mostly from commit
ed78e1e078dd44249f88b1dd8c76dafb39567161 which substituted many
num_possible_cpus() with nr_cpu_ids. As for-next branch has moved all
the first chunk allocators into mm/percpu.c, the changes are moved
from arch code to mm/percpu.c.
Signed-off-by: Tejun Heo <tj@kernel.org>
Turning on this flag could prevent the compiler from optimising away
some "useless" checks for null pointers. Such bugs can sometimes become
exploitable at compile time because of the -O2 optimisation.
See http://gcc.gnu.org/onlinedocs/gcc-4.1.2/gcc/Optimize-Options.html
An example that clearly shows this 'problem' is commit 6bf67672.
static void __devexit agnx_pci_remove(struct pci_dev *pdev)
{
struct ieee80211_hw *dev = pci_get_drvdata(pdev);
- struct agnx_priv *priv = dev->priv;
+ struct agnx_priv *priv;
AGNX_TRACE;
if (!dev)
return;
+ priv = dev->priv;
By reverting this patch, and compile it with and without
-fno-delete-null-pointer-checks flag, we can see that the check for dev
is compiled away.
call printk #
- testq %r12, %r12 # dev
- je .L94 #,
movq %r12, %rdi # dev,
Clearly the 'fix' is to stop using dev before it is tested, but building
with -fno-delete-null-pointer-checks flag at least makes it harder to
abuse.
Signed-off-by: Eugene Teo <eugeneteo@kernel.sg>
Acked-by: Eric Paris <eparis@redhat.com>
Acked-by: Wang Cong <amwang@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This causes kernel images that don't run init to completion with certain
broken gcc versions.
This fixes kernel bugzilla entry:
http://bugzilla.kernel.org/show_bug.cgi?id=13012
I suspect the gcc problem is this:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=28230
Fix the problem by using the -fno-strict-overflow flag instead, which
not only does not exist in the known-to-be-broken versions of gcc (it
was introduced later than fwrapv), but seems to be much less disturbing
to gcc too: the difference in the generated code by -fno-strict-overflow
are smaller (compared to using neither flag) than when using -fwrapv.
Reported-by: Barry K. Nathan <barryn@pobox.com>
Pushed-by: Frans Pop <elendil@planet.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds
Jianbin Kang
Ben Gardiner
Namhyung Kim
Russell King
Steven Rostedt
Ingo Molnar
Jason Baron
Michal Marek
Rabin Vincent
Amerigo Wang
Yegor Yefremov
Sam Ravnborg
Andi Kleen
Thomas Gleixner
Andy Whitcroft
Nicolas Palix
Arnaldo Carvalho de Melo
Greg Thelen
Joe Perches
David Rientjes
Roland McGrath
H. Peter Anvin
Wenji Huang
Josh Triplett
Tejun Heo
Eugene Teo