Pull MIPS updates from Ralf Baechle:
"This has been sitting in -next for a while with no objections and all
MIPS defconfigs except one are building fine; that one platform got
broken by another patch in your tree and I'm going to submit a patch
separately.
- a handful of fixes that didn't make 3.11
- a few bits of Octeon 3 support with more to come for a later
release
- platform enhancements for Octeon, ath79, Lantiq, Netlogic and
Ralink SOCs
- a GPIO driver for the Octeon
- some dusting off of the DECstation code
- the usual dose of cleanups"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (65 commits)
MIPS: DMA: Fix BUG due to smp_processor_id() in preemptible code
MIPS: kexec: Fix random crashes while loading crashkernel
MIPS: kdump: Skip walking indirection page for crashkernels
MIPS: DECstation HRT calibration bug fixes
MIPS: Export copy_from_user_page() (needed by lustre)
MIPS: Add driver for the built-in PCI controller of the RT3883 SoC
MIPS: DMA: For BMIPS5000 cores flush region just like non-coherent R10000
MIPS: ralink: Add support for reset-controller API
MIPS: ralink: mt7620: Add cpu-feature-override header
MIPS: ralink: mt7620: Add spi clock definition
MIPS: ralink: mt7620: Add wdt clock definition
MIPS: ralink: mt7620: Improve clock frequency detection
MIPS: ralink: mt7620: This SoC has EHCI and OHCI hosts
MIPS: ralink: mt7620: Add verbose ram info
MIPS: ralink: Probe clocksources from OF
MIPS: ralink: Add support for systick timer found on newer ralink SoC
MIPS: ralink: Add support for periodic timer irq
MIPS: Netlogic: Built-in DTB for XLP2xx SoC boards
MIPS: Netlogic: Add support for USB on XLP2xx
MIPS: Netlogic: XLP2xx update for I2C controller
...
A lot of 64-bit systems supported by Linux/MIPS have boot firmware or
bootloaders that only understand 32-bit ELF files, and as such, the vmlinux.32
target exists to support these systems. Therefore, it'd be nice if the tar-pkg
target recognised this, and included the right version when packaging up a
binary of the kernel.
This updates buildtar to support MIPS targets. MIPS may use 'vmlinux'
or 'vmlinux.32' depending on the target system. This uses 'vmlinux.32'
in preference to 'vmlinux' where present (although I should check which
is newer), including either file as /boot/vmlinux-${version}.
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1673/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
scripts/package/builddeb is used to create Debian packages.
Currently the firmware package always gets the same version number
irrespective of the Kernel version.
The paths inside the firmware package depend on the Kernel
version.
With the patch supplied the Kernel version becomes part of the
Debian firmware package number.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Ben Hutchings <ben@decadent.org.uk>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
We now provide the installed image path to the kernel hooks.
This should allow the package to better integrate with debian hooks, and
should not be too disruptive of hooks supporting only one parameter.
Signed-off-by: Anisse Astier <anisse@astier.eu>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This can reduce almost 3 times the size of the linux-image package,
while keeping the debug symbols available for this particular build, in
their own package.
This mimics the way kernels are built in debian, ubuntu, or with
make-kpkg, and comes at the price of a small slowdown in the building of
packages.
Signed-off-by: Anisse Astier <anisse@astier.eu>
Cc: Ben Hutchings <ben@decadent.org.uk>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Change the spec file to generate a kernel-devel module
allowing for compilation of external kernel modules.
This patch requires a new minimum RPM level of 4.0.3.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Prior to this patch, firmware files were being installed
in /lib/firmware with a potential conflict with already
installed kernels.
firmware files are now installed in /lib/firmware/<release>
and packaged with the rest of the modules.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
/sbin/installkernel is used to insure grub hooks are
inserted and the initramfs is created on the
target system.
The invokation installkernel will work with any
kernel as long as:
- /sbin/installkernel exists
- the kernel and sysem map files are readable
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull kbuild updates from Michal Marek:
- fix for make headers_install argv explosion with too long path
- scripts/setlocalversion does not call git update-index needlessly
- fix for the src.rpm produced by make rpm-pkg. The new make
image_name can be useful also for other packaging tools.
- scripts/mod/devicetable-offsets.o is not rebuilt during each make run
- make modules_install dependency fix
- scripts/sortextable portability fix
- fix for kbuild to generate the output directory for all object files
in subdirs.
- a couple of minor fixes
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: create directory for dir/file.o
tools/include: use stdint types for user-space byteshift headers
Makefile: Fix install error with make -j option
Fix a build warning in scripts/mod/file2alias.c
improve modalias building
scripts/mod: Spelling s/DEVICEVTABLE/DEVICETABLE/
kbuild: fix error when building from src rpm
scripts/setlocalversion on write-protected source tree
Makefile.lib: align DTB quiet_cmd
kbuild: fix make headers_install when path is too long
The following issue can be reproduced with Linus' tree on
an x86_64 server.
>+ cp /home/user/rpmbuild-test/BUILDROOT/kernel-3.9.2.x86_64/boot/vmlinuz-3.9.2
>cp: missing destination file operand after
>/home/user/rpmbuild-test/BUILDROOT/kernel-3.9.2-1.x86_64/boot/vmlinuz-3.9.2'
>Try `cp --help' for more information.
>error: Bad exit status from /var/tmp/rpm-tmp.R4o0iI (%install)
Here are the commands to reproduce:
make defconfig
make rpm-pkg
Use the resulting src rpm to build as follows:
mkdir ~/rpmbuild-test
cd ~/rpmbuild-test
rpmbuild --rebuild --define "_topdir `pwd`" -vv ~/rpmbuild/SRPMS/kernel-3.10.0_rc1+-1.src.rpm
The issue is because the %install script uses $KBUILD_IMAGE and it hasn't
been set since it is only available in the kbuild system and not in the
%install script.
This patch adds a Makefile target to emit the image_name that can be used
and modifies the mkspec to use the dynamic name in %install.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Commit 6501320311 dropped the rpm spec as a
prerequisite for the binrpm-pkg target but forgot to update $< usage,
which causes the rule to break.
This commit fixes that by replacing $< with the spec name.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The *pkg targets are always run, so it makes no sense to cache the
generated specfile. This also fixes build errors when the specfile
becomes out of date, without the Makefile noticing it:
$ make rpm
works
$ echo yadadada >localversion-test
$ make rpm
fails, because kernel.spec assumes the old kernel release string
Signed-off-by: Michal Marek <mmarek@suse.cz>
Now that we only package explicitly listed files to the tarball, there
is no need to abuse the parent directory.
Signed-off-by: Michal Marek <mmarek@suse.cz>
The source tree can contain lots of uninteresting data like tag or
cscope files, packaging which slows down make rpm needlessly. It can
also break the build, if the tree contains an unrelated file named
*.spec. The downside of this change is that new subdirectories have to
be added to the KBUILD_ALLDIRS variable in the top-level Makefile. The
upside is that the behavior is more predictable.
Signed-off-by: Michal Marek <mmarek@suse.cz>
When dealing with multiple sub-arches (like 32- and 64-bit on x86, for
example) generating a bunch of kernel tar archives with the same name
but for different sub-arches could get confusing and error-prone. Also,
the build process could overwrite otherwise unrelated builds and you
probably don't want that. So, add the architecture to the archive name
for more clarity and less shoot-yourself-in-the-foot practices.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
KBUILD_OUTPUT is always empty here, so it is useless to test it. But
while use O=.., objtree and srctree will be different. I compare them
instead.
Signed-off-by: Bin Wang <wbin00@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
'make rpm-pkg' and 'make binrpm-pkg' fail when the kernel source is
read-only. Specifically, when the RPM spec generated by
scripts/package/mkspec is run, KBUILD_SRC happens to be set to the
source location and thus the invocation of 'make headers_install'
fails when an internal call to 'filechk' tries to write a file into
the source tree.
The fix is to clear KBUILD_SRC for the 'make headers_install'
invocation in the spec file, as is already done for the 'make
modules_install' invocation.
Signed-off-by: David R. Bild <drbild@umich.edu>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull kbuild changes from Michal Marek:
"The main part of kbuild for v3.7 contains:
- Fix for scripts/Makefile.modpost to not choke on a '.ko' substring
in the build directory path
- Two warning fixes (modpost and main Makefile)
- __compiletime_error works also with gcc 4.3
- make tar{gz,bz2,xz}-pkg uses default compression settings instead
of saving as many bytes as possible (this should actually be in the
misc branch, I don't know why I applied it here)."
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
compiler-gcc4.h: correct verion check for __compiletime_error
modpost: Permit .GCC.command.line sections
Kbuild: use normal compression settings for tar*-pkg
scripts/Makefile.modpost: error in finding modules from .mod files.
kbuild: Remove useless warning while appending KCFLAGS
For large kernel configurations (like a distribution kernel)
targz-pkg takes a quite long time to just do the compression.
I clocked it at 15+mins for a SUSE kernel like config on a fast
system. And tarxz and bzip2 are even slower.
The main reason is that the script that is doing the taring sets
the highest compression level (-9). When I change it to just
use the defaults the gzip time for the same kernel goes down
to ~3 mins. I haven't tested xz and bzip, but I expect those
to be much faster too.
I'm not willing to wait that long for a small compression
gain. So just change the script to use the defaults.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
There were reports of users destroying their Fedora installs by a kernel
tarball that replaces the /lib -> /usr/lib symlink. Let's remove the
toplevel directories from the tarball to prevent this from happening.
Reported-by: Andi Kleen <andi@firstfloor.org>
Suggested-by: Ben Hutchings <ben@decadent.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
I discovered that make deb-pkg does not add Makefile_32.cpu from
arch/x86 directory when doing i386 kernel build and package build.
Fix it by greedily adding all Makefiles.
Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl>
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
That way they don't file conflict with official firmware package:
trying to overwrite '/lib/firmware/qlogic/1040.bin', which is
also in package firmware-qlogic 0.35
..
Reported-by: Michael Prokop <mika@debian.org>
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
After 303395ac3b, some headers are
autogenerated. Include these autogenerated headers (mainly
unistd_32_ia32.h) in out-of-tree builds to allow DKMS modules to be
built succesfully.
Signed-off-by: Peter Lekensteyn <lekensteyn@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The out-of-tree build is broken in 'make deb-pkg'. The
header checks and the header install works on the source and
not on the object tree.
While fixing this also replace the direct 'make' invocations
with the $MAKE variable to be consistent within the script.
Cc: maximilian attems <max@stro.at>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: debian-kernel@lists.debian.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
For user-mode Linux the other packages are not required. So
only build the package with the linux-image in it.
Cc: maximilian attems <max@stro.at>
Cc: debian-kernel@lists.debian.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Tested-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The Link to the kernel header files in the debian packages
point to the original build directory. This is a bad choice
if the packages were installed on a different machine. Fix
this in by manually re-creating the link in the builddeb
script.
Cc: maximilian attems <max@stro.at>
Cc: debian-kernel@lists.debian.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The current use of /tmp for file lists is insecure. Put them under
$objtree/debian instead.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org # 2.6.39+
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Specify --git-dir when building perf targets to allow out-of-tree
builds using O=<build-dir>.
The shell command in `git archive' had to be modified to allow proper
file name expansion of the files listed in MANIFEST.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
kbuild: Create a kernel-headers RPM
rpm-pkg: Fix when current directory is a symlink
Replace '-' in kernel version with '_'
To compile binaries which depend on new kernel interfaces, we need a
kernel-headers RPM
Signed-off-by: Arun Sharma <asharma@fb.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The better fix would be to stop using the parent directory (principle of
least surprise), but as long as we use it, use it consistently.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Removing the '-' results in hard to read filenames such as:
kernel-2.6.35.2000042g76e4caf-28.x86_64.rpm
kernel-2.6.35.2_000042_g76e4caf-28.x86_64.rpm is easier to
read.
Signed-off-by: Arun Sharma <asharma@fb.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
When building linux-headers package using deb-pkg, builddeb erroneously assume
current directory is the source tree. This is not true if building in another
directory, using make O=... deb-pkg.
This patch fix this problem.
Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr>
Tested-by: Nikolai Kondrashov <spbnick@gmail.com>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Fix x86 centric path to allow building kernel-header packages for
other architecture.
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
deb-pkg: s/hdr/kernel_headers_/ && s/header/libc_headers_/
deb-pkg: Make deb-pkg generate a seperate linux-libc-dev deb
kbuild: create linux-headers package in deb-pkg
kbuild, deb-pkg: support overriding userland architecture
kbuild, deb-pkg: select userland architecture based on UTS_MACHINE
kbuild, deb-pkg: Fix build with paranoid umask
hdrpackage and headerpackage are not intuitive names,
use proposed alternatives by Michel Marek.
While touching them move the mkdir of the kernel_headers dir up
and fix it for paranoid umask.
CC: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
userland dev likes latest incarnation of that userland API.
make it easy to also build it on make deb-pkg invocation:
dpkg-deb: building package `linux-libc-dev' in `../linux-libc-dev_2.6.32-rc6-4_amd64.deb'.
Last year patch rebased on top of latest deb-pkg changes.
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Create a linux-headers-$KVER.deb package which can be used to build
external modules without having the source tree around.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Usefull if building for sparc64 userland, because the
sparc and sparc64 userlands use the same 64-bit kernel,
making it impossible to always select the correct userland
architecture for the resulting debian package.
Might also be usefull, if you want a i386 userland with a amd64 kernel.
Example usage:
make KBUILD_DEBARCH=i386 deb-pkg
LKML-reference: <alpine.DEB.2.02.1011051437500.13287@aurora.sdinet.de>
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Instead of creating the debian package for the compiling userland,
create it for a userland matching the kernel thats being compiled.
This patch supports all Lenny release architectures,
and Linux-based architecture candidates for Squeeze.
If it can't find a proper Debian userspace it displays a warning,
and fallback to let deb-gencontrol use the host's userspace arch.
Eg. with this patch the following make command:
make ARCH=i386 deb-pkg
will output an i386 Debian package instead of an amd64 one,
when run on an amd64 machine.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
umask 077
make deb-pkg
<snipp ..>
dpkg-deb: building package `linux-image-2.6.36+' in `../linux-image-2.6.36+_2.6.36+-4_amd64.deb'.
dpkg-deb: control directory has bad permissions 700 (must be >=0755 and <=0775)
make[1]: *** [deb-pkg] Error 2
Reported-by: Bastian Blank <waldi@debian.org>
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
scripts/package: don't break if %{_smp_mflags} isn't set
kbuild, deb-pkg: Check if KBUILD_IMAGE exists before copying it
Same fix as in 13797b77d4 is needed for the "new"
line invoking _smp_mflags for modules_install. Without the fix, `make
binrpm-pkg` fails with:
+ make '%{_smp_mflags}' KBUILD_SRC= modules_install
make[2]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule.
make[2]: *** No rule to make target `%{_smp_mflags}'. Stop.
error: Bad exit status from /var/tmp/rpm-tmp.8S9B9e (%install)
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Linus Torvalds
Stuart Longland
Heinrich Schuchardt
Anisse Astier
Mike Marciniszyn
Luiz Capitulino
Michal Marek
Borislav Petkov
Bin Wang
David R. Bild
Andi Kleen
maximilian attems
Lekensteyn
Joerg Roedel
Ben Hutchings
Paul Menzel
matt mooney
Arun Sharma
Lucas De Marchi
Zdenek Kaspar
Nicolas de Pesloüan
Theodore Ts'o
Asbjoern Sloth Toennesen
Nishanth Aravamudan