Граф коммитов

6 Коммитов

Автор SHA1 Сообщение Дата
Daniel Kurtz 1766e4b704 pinctrl/amd: fix gpio irq level in debugfs
According to the AMD BKDG, the GPIO ActiveLevel bits (10:9) map to:
 00 Active High
 01 Active Low
 10 Active on both edges iff LevelTrig (bit 8) == 0
 11 Reserved

The current code has a bug where it interprets 00 => Active Low, and
01 => Active High.

Fix the bug, restrict "Active on both" to just the edge trigger case, and
refactor a bit to make the logic more readable.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-29 22:20:15 +02:00
Daniel Drake 79d2c8bede pinctrl/amd: save pin registers over suspend/resume
The touchpad in the Asus laptop models X505BA/BP and X542BA/BP is
unresponsive after suspend/resume. The following error appears during
resume:

  i2c_hid i2c-ELAN1300:00: failed to reset device.

The problem here is that i2c_hid does not notice the interrupt being
generated at this point, because the GPIO is no longer configured
for interrupts.

Fix this by saving pinctrl-amd pin registers during suspend and
restoring them at resume time.

Based on code from pinctrl-intel.

Cc: stable@vger.kernel.org
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-12 15:58:45 +02:00
Julia Cartwright 229710fecd pinctrl: amd: make use of raw_spinlock variants
The amd pinctrl drivers currently implement an irq_chip for handling
interrupts; due to how irq_chip handling is done, it's necessary for the
irq_chip methods to be invoked from hardirq context, even on a a
real-time kernel.  Because the spinlock_t type becomes a "sleeping"
spinlock w/ RT kernels, it is not suitable to be used with irq_chips.

A quick audit of the operations under the lock reveal that they do only
minimal, bounded work, and are therefore safe to do under a raw spinlock.

Signed-off-by: Julia Cartwright <julia@ni.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16 16:39:15 +01:00
Shah, Nehal-bakulchandra 3bfd44306c pinctrl: amd: Add support for additional GPIO
This patch adds support for new Bank and adds IRQCHIP_SKIP_SET_WAKE flag.

Reviewed-by: S-k, Shyam-sundar <Shyam-sundar.S-k@amd.com>
Signed-off-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-28 13:26:09 +01:00
Ken Xue 25a853d037 Fix inconsistent spinlock of AMD GPIO driver which can be
recognized by static analysis tool smatch. Declare constant
Variables with Sparse's suggestion.

Signed-off-by: Ken Xue <Ken.Xue@amd.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-07 11:36:49 +02:00
Ken Xue dbad75dd1f pinctrl: add AMD GPIO driver support.
KERNCZ GPIO is a new IP from AMD. it can be implemented in both x86 and ARM.
Current driver patch only support GPIO in x86.

Signed-off-by: Ken Xue <Ken.Xue@amd.com>
[Moved back to <linux/gpio.h> header]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-18 02:02:21 +01:00