Граф коммитов

48 Коммитов

Автор SHA1 Сообщение Дата
S.j. Wang 903c220b1e
ASoC: fsl_esai: Fix missing break in switch statement
case ESAI_HCKT_EXTAL and case ESAI_HCKR_EXTAL should be
independent of each other, so replace fall-through with break.

Fixes: 43d24e76b6 ("ASoC: fsl_esai: Add ESAI CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-02 11:11:48 +09:00
S.j. Wang 1997ee89f3
ASoC: fsl_esai: Support synchronous mode
In ESAI synchronous mode, the clock is generated by Tx, So
we should always set registers of Tx which relate with the
bit clock and frame clock generation (TCCR, TCR, ECR), even
there is only Rx is working.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-05 09:54:03 +07:00
S.j. Wang 0ff4e8c61b
ASoC: fsl_esai: fix channel swap issue when stream starts
There is very low possibility ( < 0.1% ) that channel swap happened
in beginning when multi output/input pin is enabled. The issue is
that hardware can't send data to correct pin in the beginning with
the normal enable flow.

This is hardware issue, but there is no errata, the workaround flow
is that: Each time playback/recording, firstly clear the xSMA/xSMB,
then enable TE/RE, then enable xSMB and xSMA (xSMB must be enabled
before xSMA). Which is to use the xSMA as the trigger start register,
previously the xCR_TE or xCR_RE is the bit for starting.

Fixes commit 43d24e76b6 ("ASoC: fsl_esai: Add ESAI CPU DAI driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-21 14:49:36 +00:00
S.j. Wang cc29ea0073
ASoC: fsl_esai: fix register setting issue in RIGHT_J mode
The ESAI_xCR_xWA is xCR's bit, not the xCCR's bit, driver set it to
wrong register, correct it.

Fixes 43d24e76b6 ("ASoC: fsl_esai: Add ESAI CPU DAI driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Ackedy-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-19 11:40:36 +00:00
Rob Herring 5d585e1e75
ASoC: Convert to using %pOFn instead of device_node.name
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-28 19:07:00 +01:00
Gustavo A. R. Silva 16bbeb2b43
ASoC: fsl_esai: Mark expected switch fall-through
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 1222121 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-03 17:59:21 +01:00
Fabio Estevam 3b5af9f116
ASoC: fsl_esai: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-03 10:29:05 +09:00
Nicolin Chen 8a2278b7fb
ASoC: fsl_esai: Add freq check in set_dai_sysclk()
The freq parameter indicates the physical frequency of an actual
input clock or a desired frequency of an output clock for HCKT/R.
It should never be passed 0. This might cause Division-by-zero.

So this patch adds a check to fix it.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-16 13:04:40 +01:00
Nicolin Chen c656941df9
ASoC: fsl_esai: Fix divisor calculation failure at lower ratio
When the desired ratio is less than 256, the savesub (tolerance)
in the calculation would become 0. This will then fail the loop-
search immediately without reporting any errors.

But if the ratio is smaller enough, there is no need to calculate
the tolerance because PM divisor alone is enough to get the ratio.

So a simple fix could be just to set PM directly instead of going
into the loop-search.

Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2018-04-12 15:27:02 +01:00
Fabio Estevam 0600b3e101
ASoC: fsl_esai: Use 'const _be *' type for iprop
The 'iprop' variable is passed as an argument to the be32_to_cpup()
function, which expects a 'const _be *' type.

Change the iprop variable type so that the following build warnings
with W=1 are gone:

sound/soc/fsl/fsl_esai.c:860:54: warning: incorrect type in argument 1 (different base types)
sound/soc/fsl/fsl_esai.c:860:54:    expected restricted __be32 const [usertype] *p
sound/soc/fsl/fsl_esai.c:860:54:    got unsigned int const [usertype] *[assigned] iprop

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-12 09:31:55 +00:00
Gustavo A. R. Silva 5d29e95eec ASoC: fsl_esai: constify snd_soc_dai_ops structure
This structure is only stored in the ops field of a snd_soc_dai_driver
structure. That field is declared const, so snd_soc_dai_ops structures
that have this property can be declared as const also.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-17 16:16:38 +01:00
Fabio Estevam f2a3ee0125 ASoC: fsl_esai: Remove unneeded definition
There is no need for defining FSL_ESAI_RATES locally as the standard
SNDRV_PCM_RATE_8000_192000 definition can be used instead.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-12 16:44:50 +01:00
Marek Vasut 0effb8651e ASoC: fsl_esai: use flat regmap cache
Same as commit ce492b3b8f
Subject: drm/fsl-dcu: use flat regmap cache

Using flat regmap cache instead of RB-tree to avoid the following
lockdep warning on driver load:
WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2871 lockdep_trace_alloc+0x104/0x128
DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))

The RB-tree regmap cache needs to allocate new space on first
writes. However, allocations in an atomic context (e.g. when a
spinlock is held) are not allowed. The function regmap_write
calls map->lock, which acquires a spinlock in the fast_io case.
Since the driver uses MMIO, the regmap bus of type regmap_mmio
is being used which has fast_io set to true.

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-20 18:55:22 +01:00
Colin Ian King 3bcc865672 ASoC: fsl_esai: fix spelling mistake "Transmition" -> "Transmission"
Trivial fix to spelling mistakes in dev_dbg messages

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-03 11:59:12 +01:00
Mark Brown 9764350d71 Merge remote-tracking branches 'asoc/topic/dpcm', 'asoc/topic/dwc', 'asoc/topic/fsl', 'asoc/topic/fsl-asrc' and 'asoc/topic/fsl-esai' into asoc-next 2015-12-23 00:23:40 +00:00
Shengjiu Wang a2a4d6049a ASoC: fsl_esai: spba clock is needed by esai device
ESAI need to enable the spba clock, when sdma is using share peripheral
script. In this case, there is two spba master port is used, if don't
enable the clock, the spba bus will have arbitration issue, which may
cause read/write wrong data from/to ESAI registers.

Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-25 12:13:46 +00:00
Zidan Wang 4ca730436a ASoC: fsl: using params_width function to simplify code
using params_width function to simplify code.

Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-25 12:12:57 +00:00
Zidan Wang 8973112aa4 ASoC: fsl_esai: ETDR and TX0~5 registers are non volatile
ETDR and TX0~5 registers are writable and not readable. So they are non
volatile. Remove them from volatile list, and add default register value for
them.

Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-16 10:06:01 +00:00
Nicolin Chen 739146b614 ASoC: fsl: Use #ifdef instead of #if for CONFIG_PM_SLEEP
Change them to #ifdef as CONFIG_PM_SLEEP might not be defined at all.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-26 11:08:00 +09:00
Zidan Wang c64c60763b ASoC: fsl_esai: Add driver suspend and resume to support MEGA Fast
For i.MX6 SoloX, there is a mode of the SoC to shutdown all power source of
modules during system suspend and resume procedure. Thus, ESAI needs to save
all the values of registers before the system suspend and restore them after
the system resume.

Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-05 17:26:19 +01:00
Linus Torvalds abebcdfb64 sound updates for 4.3-rc1
There are little changes in core part, but lots of development are
 found in drivers, especially ASoC.  The diffstat shows regmap-
 related changes for a slight API additions / changes, and that's all.
 
 Looking at the code size statistics, the most significant addition
 is for Intel Skylake.  (Note that SKL support is still underway, the
 codec driver is missing.)  Also STI controller driver is a major
 addition as well as a few new codec drivers.
 
 In HD-audio side, there are fewer changes than the past.  The
 noticeable change is the support of ELD notification from i915
 graphics driver.  Thus this pull request carries a few changes in
 drm/i915.
 
 Other than that, USB-audio got a rewrite of runtime PM code.  It
 was initiated by lockdep warning, but resulted in a good cleanup in
 the end.
 
 Below are the highlights:
 
 Common:
 - Factoring out of AC'97 reset code from ASoC into the core helper
 - A few regmap API extensions (in case it's not pulled yet)
 
 ASoC:
 - New drivers for Cirrus CS4349, GTM601, InvenSense ICS43432, Realtek
   RT298 and ST STI controllers
 - Machine drivers for Rockchip systems with MAX98090 and RT5645 and
   RT5650
 - Initial driver support for Intel Skylake devices
 - Lots of rsnd cleanup and enhancements
 - A few DAPM fixes and cleanups
 - A large number of cleanups in various drivers (conversion and
   standardized to regmap, component) mostly by Lars-Peter and Axel
 
 HD-audio:
 - Extended HD-audio core for Intel Skylake controller support
 - Quirks for Dell headsets, Alienware 15
 - Clean up of pin-based quirk tables for Realtek codecs
 - ELD notifier implenetation for Intel HDMI/DP
 
 USB-audio:
 - Refactor runtime PM code to make lockdep happier
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJV6TwJAAoJEGwxgFQ9KSmkZoEP/06GrsGlfgIfBbnlAKcsZ0t0
 RDDCbxmwD8IsjTk180Gs3qBuhVPurhmPxq6Leow5fBktkEK5bIN3eAQkO9aIMroW
 xxU1UF6Q9XE2j97e/PhhUld7/NP0IQK/YTMuwX74G2kfEkA9Lktl4UjNMw9mKJX2
 8OIwz8ZuqSG60znmGlgiqRE4M3Svs1L/jVP1wrPg2DXQfe+ptAJpUTsyVGOMRWm3
 IaJ9h5OelPg8Jm61zcg6/pgsdYx4oquCV5wLwMz8rzIUfHb7ox8F7YKOzB+sXtYI
 zcsTfF2CqifoBcQAh9c+XE4+gMamAdheA+uc8ScUkcskucTj4Fr5tXLiPSN9QMt4
 QGOOVjqcpWv5rWwAgzUJvl1/PT4HyQfkXn5tEQVGdg9Ab1SIcQBzD1+nHUV94vKZ
 N7/grMdqJ56zUGK2fEcBS6BEDlaSToOIHDrQ1iPFNBvmW8qjBq9tYaufTGC6Vtj2
 0YKJukzIbyqLIgQtQf44aqLouFIz2lq437PqRQ4W+9C3FwGN9FKCYJ/JzvOGDIJa
 sSjEwQkJ9vnmZ3E2B30NKb24TG8pPq9WPIN2Rqe5EbHctU3gEnMScwvmG7SmCSG5
 LtDVr6Q5XKFM56cVb7tdZl6Jv97BvGu6EERM+zN+8YyMver206rC8upWOev6R2q3
 asvLDEchv7Qm3upx+PYg
 =/sXs
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "There are little changes in core part, but lots of development are
  found in drivers, especially ASoC.  The diffstat shows regmap-related
  changes for a slight API additions / changes, and that's all.

  Looking at the code size statistics, the most significant addition is
  for Intel Skylake.  (Note that SKL support is still underway, the
  codec driver is missing.) Also STI controller driver is a major
  addition as well as a few new codec drivers.

  In HD-audio side, there are fewer changes than the past.  The
  noticeable change is the support of ELD notification from i915
  graphics driver.  Thus this pull request carries a few changes in
  drm/i915.

  Other than that, USB-audio got a rewrite of runtime PM code.  It was
  initiated by lockdep warning, but resulted in a good cleanup in the
  end.

  Below are the highlights:

  Common:
   - Factoring out of AC'97 reset code from ASoC into the core helper
   - A few regmap API extensions (in case it's not pulled yet)

  ASoC:
   - New drivers for Cirrus CS4349, GTM601, InvenSense ICS43432, Realtek
     RT298 and ST STI controllers
   - Machine drivers for Rockchip systems with MAX98090 and RT5645 and
     RT5650
   - Initial driver support for Intel Skylake devices
   - Lots of rsnd cleanup and enhancements
   - A few DAPM fixes and cleanups
   - A large number of cleanups in various drivers (conversion and
     standardized to regmap, component) mostly by Lars-Peter and Axel

  HD-audio:
   - Extended HD-audio core for Intel Skylake controller support
   - Quirks for Dell headsets, Alienware 15
   - Clean up of pin-based quirk tables for Realtek codecs
   - ELD notifier implenetation for Intel HDMI/DP

  USB-audio:
   - Refactor runtime PM code to make lockdep happier"

* tag 'sound-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (411 commits)
  drm/i915: Add locks around audio component bind/unbind
  drm/i915: Drop port_mst_index parameter from pin/eld callback
  ALSA: hda - Fix missing inline for dummy snd_hdac_set_codec_wakeup()
  ALSA: hda - Wake the codec up on pin/ELD notify events
  ALSA: hda - allow codecs to access the i915 pin/ELD callback
  drm/i915: Call audio pin/ELD notify function
  drm/i915: Add audio pin sense / ELD callback
  ASoC: zx296702-i2s: Fix resource leak when unload module
  ASoC: sti_uniperif: Ensure component is unregistered when unload module
  ASoC: au1x: psc-i2s: Convert to use devm_ioremap_resource
  ASoC: sh: dma-sh7760: Convert to devm_snd_soc_register_platform
  ASoC: spear_pcm: Use devm_snd_dmaengine_pcm_register to fix resource leak
  ALSA: fireworks/bebob/dice/oxfw: fix substreams counting at vmalloc failure
  ASoC: Clean up docbook warnings
  ASoC: txx9: Convert to devm_snd_soc_register_platform
  ASoC: pxa: Convert to devm_snd_soc_register_platform
  ASoC: nuc900: Convert to devm_snd_soc_register_platform
  ASoC: blackfin: Convert to devm_snd_soc_register_platform
  ASoC: au1x: Convert to devm_snd_soc_register_platform
  ASoC: qcom: Constify asoc_qcom_lpass_cpu_dai_ops
  ...
2015-09-04 11:46:02 -07:00
Geert Uytterhoeven d8ffcf711c ASoC: fsl_esai: Spelling s/specifially/specifically/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-08-07 13:58:30 +02:00
Shengjiu Wang 0d69e0dddf ASoC: fsl: Add dedicated DMA buffer size for each cpu dai
As the ssi is not the only cpu dai, there are esai, spdif, sai.
and imx_pcm_dma can be used by all of them. Especially ESAI need
a larger DMA buffer size. So Add dedicated DMA buffer for each cpu
dai.

Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Timur Tabi <timur@tabi.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-07 13:16:12 +01:00
Fabio Estevam da2d45249a ASoC: fsl_esai: Make error message concise
Currently the error message uses 'np->full_name' which leads to a very verbose
log that contains the full path of the node.

We can have a concise log by using pdev->name instead.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-08 18:34:43 +00:00
Linus Torvalds e6b5be2be4 Driver core patches for 3.19-rc1
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00
Nicolin Chen 86ea522b36 ASoC: fsl_esai: Use dynamic slot width as default
The driver previously used 32-bit fixed slot width as default.
In result, ESAI might use 32-bit length to capture 16-bit width
audio slot from CODEC side when ESAI is running as DAI slave.

So this patch just removes the default slot_width so as to use
dynamic slot width. If there comes a specific situation that
needs a fixed width, the machine driver shall set slot_width
via set_tdm_slot() so as to let the ESAI driver replace the
dynamic width policy with the fixed value.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25 12:47:13 +00:00
Greg Kroah-Hartman a8a93c6f99 Merge branch 'platform/remove_owner' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next
Remove all .owner fields from platform drivers
2014-11-03 19:53:56 -08:00
Daniel Mack 6aa256b6c6 ASoC: fsl: use strncpy() to prevent copying of over-long names
Use strncpy() instead of strcpy(). That's not a security issue, as the
source buffer is taken from DT nodes, but we should still enforce bound
checks. Spotted by Coverity.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-22 11:38:01 +01:00
Wolfram Sang 8cb636b1a1 ASoC: fsl: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:22:08 +02:00
Mark Brown 5b87d31309 Merge branch 'topic/fsl' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-fsl-esai 2014-09-01 10:49:32 +01:00
Xiubo Li 92bd0334b2 ASoC: fsl-esai: Convert to use regmap framework's endianness method.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-27 19:19:28 +01:00
Mark Brown 6be1f475e0 Merge branch 'fix/fsl-esai' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-fsl-esai 2014-08-16 17:22:36 -05:00
Shengjiu Wang de0d712a6d ASoC: fsl_esai: refine esai for TDM support
Original driver didn't store the number of slots, just fix the slot number
to 2, use this default number to calculate bclk and pins for TX/RX.
In this patch, add one parameter for slots, and update the calculation of
bclk and pins of TX/RX. Then driver will be compatible with slots > 2 in
TDM mode.

Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-16 17:06:15 -05:00
Shengjiu Wang 769091ee18 ASoC: fsl-esai: Revert .xlate_tdm_slot_mask() support
This reverts commit a603c8ee52.

fsl_asoc_xlate_tdm_slot_mask() is different with snd_soc_xlate_tdm_slot_mask().
fsl_asoc_xlate_tdm_slot_mask() will set the enabled bit to 0, disabled bit
to 1. snd_soc_xlate_tdm_slot_mask() will set the enabled bit to 1, disabled
bit to 0.
For esai when the bit value is 1, the slot is enabled, when the bit value is 0,
the slot is disabled. If using fsl_asoc_xlate_tdm_slot_mask(), the esai will
work abnormally. So revert this patch, make the esai use default function.

Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-13 19:50:00 +01:00
Nicolin Chen 74ccb27c35 ASoC: fsl_esai: Add stream names for DPCM usage
DPCM needs extra dapm routes in the machine driver to route audio
between Front-End and Back-End. In order to differ the stream names
in the route map from CODECs, we here add specific stream names to
ESAI driver so that we can implement ASRC via DPCM to it.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-31 20:55:04 +01:00
Mark Brown 3a6a489fd8 Merge remote-tracking branches 'asoc/topic/devm', 'asoc/topic/fsl', 'asoc/topic/fsl-esai', 'asoc/topic/fsl-sai', 'asoc/topic/fsl-spdif' and 'asoc/topic/fsl-ssi' into asoc-next 2014-05-22 00:23:51 +01:00
Nicolin Chen f975ca46f6 ASoC: fsl_esai: Bypass divider settings if clock requirement is not changed
We don't need to change those dividers if bclk and mclk remains the same
directions and values.

Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-12 23:15:25 +01:00
Nicolin Chen 4f8210f66e ASoC: fsl_esai: Set PCRC and PRRC registers at the end of hw_params()
According to Reference Manual -- ESAI Initialization chapter, as the
standard procedure of ESAI personal reset, the PCRC and PRRC registers
should be remained in its reset value and then configured after T/RCCR
and T/RCR configurations's done but before TE/RE's enabling.

So this patch moves PCRC and PRRC settings to the end of hw_params().

Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-12 23:13:13 +01:00
Nicolin Chen 57ebbcafab ASoC: fsl_esai: Only bypass sck_div for EXTAL source
ESAI can only output EXTAL clock source directly. But for FSYS clock source,
ESAI can not output it without getting through PSR PM dividers.

So this patch adds an extra check in the code.

Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-12 23:13:13 +01:00
Nicolin Chen 89e47f62cf ASoC: fsl_esai: Fix incorrect condition within ratio range check for FP
The range here from 1 to 16 is confined to FP divider only while the
sck_div indicates if the calculation contains PSR and PM dividers. So
for the case using PSR and PM since the sck_div is true, the range of
ratio would simply become bigger than 16.

So this patch fixes the condition here and adds one line comments to
make the purpose here clear.

Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-12 23:13:13 +01:00
Xiubo Li b21cc2f5fd ASoC: esai: Add VF610+ compatibles support.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Acked-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14 21:45:08 +01:00
Xiubo Li 3e185238a3 ASoC: esai: use the precise definition of 'ret'.
Use the precise definition of 'ret', which will be used for
the error check.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Acked-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14 21:44:57 +01:00
Xiubo Li a603c8ee52 ASoC: fsl-esai: Add .xlate_tdm_slot_mask() support.
This patch add .xlate_tdm_slot_mask support for ESAI, and this will
generate the TDM slot TX and RX masks.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-25 13:06:43 +00:00
Mark Brown 84f6965e2b Merge remote-tracking branches 'asoc/topic/da7213', 'asoc/topic/da732x', 'asoc/topic/da9055', 'asoc/topic/davinci', 'asoc/topic/fsl', 'asoc/topic/fsl-esai', 'asoc/topic/fsl-sai' and 'asoc/topic/fsl-spdif' into asoc-next 2014-03-12 23:04:22 +00:00
Xiubo Li eaba603fc7 ASoC: fsl-esai: big-endian support
For most platforms, the CPU and ESAI device is in the same endianess
mode. While for the LS1 platform, the CPU is in LE mode and the ESAI
is in BE mode.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Acked-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-12 15:32:22 +00:00
Fabio Estevam 33529ec94f ASoC: fsl_esai: Check the return value from clk_prepare_enable()
clk_prepare_enable() may fail, so let's check its return value and propagate it
in the case of error.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-11 12:54:28 +00:00
Xiubo Li 236014ac7a ASoC: fsl-esai: fix ESAI TDM slot setting
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Acked-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-10 13:39:18 +00:00
Nicolin Chen 43d24e76b6 ASoC: fsl_esai: Add ESAI CPU DAI driver
This patch implements a device-tree-only CPU DAI driver for Freescale ESAI
controller that supports:

 - 12 channels playback and 8 channels record.
   [ Some of the inner transmitters and receivers are sharing same group of
     pins. So the maxmium 12 output or 8 input channels are only valid if
     there is no pin conflict occurring to it. ]

 - Independent (asynchronous mode) or shared (synchronous mode) transmit and
   receive sections with separate or shared internal/external clocks and frame
   syncs, operating in Master or Slave mode.
   [ Current ALSA seems not to allow CPU DAI drivers to configure DAI format
     separately for PLAYBACK and CAPTURE. So this first version only supports
     the case that uses the same DAI format for both directions. ]

 - Various DAI formats: I2S, Left-Justified, Right-Justified, DSP-A and DSP-B.

 - Programmable word length (8, 16, 20 or 24bits)

 - Flexible selection between system clock or external oscillator as input
   clock source, programmable internal clock divider and frame sync generation.

Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-10 12:52:15 +00:00