Граф коммитов

33 Коммитов

Автор SHA1 Сообщение Дата
Robert Richter b716916679 perf, x86: Implement IBS initialization
This patch implements IBS feature detection and initialzation. The
code is shared between perf and oprofile. If IBS is available on the
system for perf, a pmu is setup.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1316597423-25723-3-git-send-email-robert.richter@amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-10 06:57:16 +02:00
Robert Richter bae663bc63 oprofile/x86: make AMD IBS hotplug capable
Current IBS code is not hotplug capable. An offline cpu might not be
initialized or deinitialized properly. This patch fixes this by
removing on_each_cpu() functions. The IBS init/deinit code is executed
in the per-cpu functions model->setup_ctrs() and model->cpu_down()
which are also called by hotplug notifiers. model->cpu_down() replaces
model->exit() that became obsolete.

Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-06 15:11:15 +02:00
Robert Richter 8617f98c00 oprofile/x86: return -EBUSY if counters are already reserved
In case a counter is already reserved by the watchdog or perf_event
subsystem, oprofile ignored this counters silently. This case is
handled now and oprofile_setup() now reports an error.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-04 11:35:28 +02:00
Naga Chumbalkar 8588d10671 oprofile/x86: add comment to counter-in-use warning
Currently, oprofile fails silently on platforms where a non-OS entity
such as the system firmware "enables" and uses a performance
counter. There is a warning in the code for this case.

The warning indicates an already running counter. If oprofile doesn't
collect data, then try using a different performance counter on your
platform to monitor the desired event. Delete the counter from the
desired event by editing the

 /usr/share/oprofile/<cpu_type>/<cpu>/events

file. If the event cannot be monitored by any other counter, contact
your hardware or BIOS vendor.

Cc: Shashi Belur <shashi-kiran.belur@hp.com>
Cc: Tony Jones <tonyj@suse.de>
Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:14:34 +01:00
Robert Richter 98a2e73a06 oprofile/x86: warn user if a counter is already active
This patch generates a warning if a counter is already active.

Implemented for AMD and P6 models. P4 is not supported.

Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Cc: Shashi Belur <shashi-kiran.belur@hp.com>
Cc: Tony Jones <tonyj@suse.de>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:14:03 +01:00
Ingo Molnar cdd6c482c9 perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!

In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.

Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.

All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)

The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.

Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.

User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)

This patch has been generated via the following script:

  FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

  sed -i \
    -e 's/PERF_EVENT_/PERF_RECORD_/g' \
    -e 's/PERF_COUNTER/PERF_EVENT/g' \
    -e 's/perf_counter/perf_event/g' \
    -e 's/nb_counters/nb_events/g' \
    -e 's/swcounter/swevent/g' \
    -e 's/tpcounter_event/tp_event/g' \
    $FILES

  for N in $(find . -name perf_counter.[ch]); do
    M=$(echo $N | sed 's/perf_counter/perf_event/g')
    mv $N $M
  done

  FILES=$(find . -name perf_event.*)

  sed -i \
    -e 's/COUNTER_MASK/REG_MASK/g' \
    -e 's/COUNTER/EVENT/g' \
    -e 's/\<event\>/event_id/g' \
    -e 's/counter/event/g' \
    -e 's/Counter/Event/g' \
    $FILES

... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.

Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.

( NOTE: 'counters' are still the proper terminology when we deal
  with hardware registers - and these sed scripts are a bit
  over-eager in renaming them. I've undone some of that, but
  in case there's something left where 'counter' would be
  better than 'event' we can undo that on an individual basis
  instead of touching an otherwise nicely automated patch. )

Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 14:28:04 +02:00
Robert Richter 61d149d524 x86/oprofile: Implement op_x86_virt_to_phys()
This patch implements a common x86 function to convert virtual counter
numbers to physical.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-07-20 16:43:21 +02:00
Robert Richter 2904a52757 x86/oprofile: Remove unused num_virt_controls from struct op_x86_model_spec
The member num_virt_controls of struct op_x86_model_spec is not
used. This patch removes it.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-07-20 16:43:20 +02:00
Robert Richter 259a83a8ab x86/oprofile: Remove const qualifier from struct op_x86_model_spec
This patch removes the const qualifier from struct
op_x86_model_spec to make model parameters changable.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-07-20 16:43:20 +02:00
Robert Richter d8471ad3ab oprofile: Introduce op_x86_phys_to_virt()
This new function translates physical to virtual counter numbers.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-07-20 16:43:19 +02:00
Jason Yeh 4d4036e0e7 oprofile: Implement performance counter multiplexing
The number of hardware counters is limited. The multiplexing feature
enables OProfile to gather more events than counters are provided by
the hardware. This is realized by switching between events at an user
specified time interval.

A new file (/dev/oprofile/time_slice) is added for the user to specify
the timer interval in ms. If the number of events to profile is higher
than the number of hardware counters available, the patch will
schedule a work queue that switches the event counter and re-writes
the different sets of values into it. The switching mechanism needs to
be implemented for each architecture to support multiplexing. This
patch only implements AMD CPU support, but multiplexing can be easily
extended for other models and architectures.

There are follow-on patches that rework parts of this patch.

Signed-off-by: Jason Yeh <jason.yeh@amd.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-07-20 16:33:53 +02:00
Robert Richter 1241eb8f13 Merge commit 'tip/perfcounters-for-linus' into oprofile/master
Conflicts:
	arch/x86/oprofile/op_model_ppro.c

Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-06-12 17:58:48 +02:00
Robert Richter 95e74e62c1 x86/oprofile: use 64 bit values to save MSR states
This patch removes struct op_saved_msr and replaces it by an u64
variable. This makes code easier and it is possible to use 64 bit MSR
functions.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-06-11 20:12:57 +02:00
Robert Richter 217d3cfb95 x86/oprofile: replace CTR*_IS_RESERVED macros
The patch replaces all CTR*_IS_RESERVED macros.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-06-11 19:42:16 +02:00
Robert Richter dea3766ca0 x86/oprofile: replace CTRL_SET_*ACTIVE macros
The patch replaces all CTRL_SET_*ACTIVE macros. 64 bit MSR functions
and 64 bit counter values are used now. The code uses bit masks from
<asm/intel_arch_perfmon.h>.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-06-11 19:42:15 +02:00
Robert Richter 3370d35856 x86/oprofile: replace macros to calculate control register
This patch introduces op_x86_get_ctrl() to calculate the value of the
performance control register. This is generic code usable for all
models. The event and reserved masks are model specific and stored in
struct op_x86_model_spec. 64 bit MSR functions are used now. The patch
removes many hard to read macros used for ctrl calculation.

The function op_x86_get_ctrl() is common code and the first step to
further merge performance counter implementations for x86 models.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-06-11 19:42:14 +02:00
Robert Richter ef8828ddf8 x86/oprofile: pass the model to setup_ctrs() functions
In follow-on patches the setup_ctrs() functions will need data that
describes the model. This patch extends the function argument list to
pass a pointer of the model to these function.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-06-11 19:42:14 +02:00
Robert Richter ec064c093e x86/oprofile: fix and cleanup CTRL_SET_* macros
This patch fixes missing braces around macro parameters. Macro
definitions from intel_arch_perfmon.h are used where possible.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-06-11 19:42:13 +02:00
Robert Richter ff9faa8b67 x86/oprofile: move common macros to op_x86_model.h
There are duplicate macro implementations in model specific code. This
patch moves all common macros to op_x86_model.h.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-06-11 19:42:10 +02:00
Robert Richter 06552ccc36 x86/oprofile: minor style changes in struct op_x86_model_spec
Some vertical alignments. Variables are now located in the beginning
of the struct.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-06-11 16:09:54 +02:00
Robert Richter e419294ed3 x86/oprofile: moving arch_perfmon counter setup to op_x86_model_spec.init
The function arch_perfmon_init() in nmi_int.c is model specific. This
patch moves it to op_model_ppro.c by using the init function pointer
in struct op_x86_model_spec.

Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-06-10 22:09:24 +02:00
Robert Richter 849620fab4 Revert "oprofile: discover counters for op ppro too"
This reverts commit 59512900ba.

arch_perfmon_setup_counters() is actually never called for ppro, so
there is no code that changes the numbers in op_ppro_spec. The patch
as it is has no effect.

Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-06-10 22:07:35 +02:00
Robert Richter 5a289395bf Merge branch 'oprofile/x86-oprofile-for-tip' into oprofile/oprofile-for-tip
Conflicts:
	arch/x86/oprofile/op_model_ppro.c
2008-10-15 22:19:41 +02:00
Robert Richter 25ad2913ca oprofile: more whitespace fixes
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-10-15 20:55:51 +02:00
Andi Kleen 59512900ba oprofile: discover counters for op ppro too
Discover number of counters for all family 6 models even when not
in arch perfmon mode.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-10-13 19:25:11 +02:00
Andi Kleen b991702884 oprofile: Implement Intel architectural perfmon support
Newer Intel CPUs (Core1+) have support for architectural
events described in CPUID 0xA. See the IA32 SDM Vol3b.18 for details.

The advantage of this is that it can be done without knowing about
the specific CPU, because the CPU describes by itself what
performance events are supported. This is only a fallback
because only a limited set of 6 events are supported.
This allows to do profiling on Nehalem and on Atom systems
(later not tested)

This patch implements support for that in oprofile's Intel
Family 6 profiling module. It also has the advantage of supporting
an arbitary number of events now as reported by the CPU.
Also allow arbitary counter widths >32bit while we're at it.

Requires a patched oprofile userland to support the new
architecture.

v2: update for latest oprofile tree
    remove force_arch_perfmon

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-10-13 19:25:09 +02:00
Andi Kleen 5d4488027d oprofile: drop const in num counters field
allow to modify it at runtime

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-10-13 19:25:04 +02:00
Robert Richter 4c168eaf7e Revert "Oprofile Multiplexing Patch"
Reverting commit 1a960b402a for the main
branch. Multiplexing will be tracked on a separate feature branch.

Conflicts:

    arch/x86/oprofile/nmi_int.c
2008-09-24 11:08:52 +02:00
Jason Yeh 1a960b402a Oprofile Multiplexing Patch
This patch introduces multiplexing support for the Oprofile kernel
module. It basically adds a new function pointer in oprofile_operator
allowing each architecture to supply its callback to switch between
different sets of event when the timer expires. Userspace tools can
modify the time slice through /dev/oprofile/time_slice.

It also modifies the number of counters exposed to the userspace through
/dev/oprofile. For example, the number of counters for AMD CPUs are
changed to 32 and multiplexed in the sets of 4.

Signed-off-by: Jason Yeh <jason.yeh@amd.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: oprofile-list <oprofile-list@lists.sourceforge.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-26 11:48:16 +02:00
Robert Richter 6657fe4f56 x86/oprofile: renaming athlon_*() into op_amd_*()
These functions contain code for all AMD CPUs. The new names fit
better.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: oprofile-list <oprofile-list@lists.sourceforge.net>
Cc: Barry Kasindorf <barry.kasindorf@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-26 11:48:02 +02:00
Robert Richter adf5ec0bca x86/oprofile: introduce model specific init/exit functions
This patch implements model specific OProfile init/exit functions for
x86 CPUs. Though there is more rework needed at the initialization
code, this new introduced functions allow it to keep model specific
code in the corresponding op_model_*.c files.

The function interface is the same as for oprofile_arch_init/exit().

Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: oprofile-list <oprofile-list@lists.sourceforge.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-26 11:48:01 +02:00
Simon Arlott 27b46d7661 spelling fixes: arch/i386/
Spelling fixes in arch/i386/.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 01:13:56 +02:00
Thomas Gleixner ff4395654d i386: move oprofile
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 11:16:55 +02:00