Граф коммитов

34 Коммитов

Автор SHA1 Сообщение Дата
Kumar Gala d7b41b1fdf powerpc/pci: clean up direct access to sysdata by iseries platform
We shouldn't directly access sysdata to get the device node.  We should
be calling pci_device_to_OF_node().

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:26 +10:00
Stephen Rothwell x 397717c578 powerpc/iseries: Fix pci breakage due to bad dma_data initialization
Commit 4fc665b88a "powerpc: Merge 32 and
64-bit dma code" made changes to the PCI initialisation code that added
an assignment to archdata.dma_data but only for 32 bit code.  Commit
7eef440a54 "powerpc/pci: Cosmetic cleanups
of pci-common.c" removed the conditional compilation.  Unfortunately,
the iSeries code setup the archdata.dma_data before that assignment was
done - effectively overwriting the dma_data with NULL.

Fix this up by moving the iSeries setup of dma_data into a
pci_dma_dev_setup callback.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15 16:43:41 +10:00
Yang Hongyang 284901a90a dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:11 -07:00
Ingo Molnar fe333321e2 powerpc: Change u64/s64 to a long long integer type
Convert arch/powerpc/ over to long long based u64:

 -#ifdef __powerpc64__
 -# include <asm-generic/int-l64.h>
 -#else
 -# include <asm-generic/int-ll64.h>
 -#endif
 +#include <asm-generic/int-ll64.h>

This will avoid reoccuring spurious warnings in core kernel code that
comes when people test on their own hardware. (i.e. x86 in ~98% of the
cases) This is what x86 uses and it generally helps keep 64-bit code
32-bit clean too.

[Adjusted to not impact user mode (from paulus) - sfr]

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-13 14:47:59 +11:00
Mark Nelson f9226d572d powerpc: Update remaining dma_mapping_ops to use map/unmap_page
After the merge of the 32 and 64bit DMA code, dma_direct_ops lost
their map/unmap_single() functions but gained map/unmap_page().  This
caused a problem for Cell because Cell's dma_iommu_fixed_ops called
the dma_direct_ops if the fixed linear mapping was to be used or the
iommu ops if the dynamic window was to be used.  So in order to fix
this problem we need to update the 64bit DMA code to use
map/unmap_page.

First, we update the generic IOMMU code so that iommu_map_single()
becomes iommu_map_page() and iommu_unmap_single() becomes
iommu_unmap_page().  Then we propagate these changes up through all
the callers of these two functions and in the process update all the
dma_mapping_ops so that they have map/unmap_page rahter than
map/unmap_single.  We can do this because on 64bit there is no HIGHMEM
memory so map/unmap_page ends up performing exactly the same function
as map/unmap_single, just taking different arguments.

This has no affect on drivers because the dma_map_single_attrs() just
ends up calling the map_page() function of the appropriate
dma_mapping_ops and similarly the dma_unmap_single_attrs() calls
unmap_page().

This fixes an oops on Cell blades, which oops on boot without this
because they call dma_direct_ops.map_single, which is NULL.

Signed-off-by: Mark Nelson <markn@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-31 16:13:48 +11:00
Robert Jennings 6490c4903d powerpc/pseries: iommu enablement for CMO
To support Cooperative Memory Overcommitment (CMO), we need to check
for failure from some of the tce hcalls.

These changes for the pseries platform affect the powerpc architecture;
patches for the other affected platforms are included in this patch.

pSeries platform IOMMU code changes:
 * platform TCE functions must handle H_NOT_ENOUGH_RESOURCES errors and
   return an error.

Architecture IOMMU code changes:
 * Calls to ppc_md.tce_build need to check return values and return
   DMA_MAPPING_ERROR for transient errors.

Architecture changes:
 * struct machdep_calls for tce_build*_pSeriesLP functions need to change
   to indicate failure.
 * all other platforms will need updates to iommu functions to match the new
   calling semantics; they will return 0 on success.  The other platforms
   default configs have been built, but no further testing was performed.

Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-25 15:44:43 +10:00
Mark Nelson 4f3dd8a062 powerpc/dma: Use the struct dma_attrs in iommu code
Update iommu_alloc() to take the struct dma_attrs and pass them on to
tce_build(). This change propagates down to the tce_build functions of
all the platforms.

Signed-off-by: Mark Nelson <markn@au1.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-22 10:39:32 +10:00
Mark Nelson 3affedc4e1 powerpc/dma: implement new dma_*map*_attrs() interfaces
Update powerpc to use the new dma_*map*_attrs() interfaces. In doing so
update struct dma_mapping_ops to accept a struct dma_attrs and propagate
these changes through to all users of the code (generic IOMMU and the
64bit DMA code, and the iseries and ps3 platform code).

The old dma_*map_*() interfaces are reimplemented as calls to the
corresponding new interfaces.

Signed-off-by: Mark Nelson <markn@au1.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-09 16:30:43 +10:00
FUJITA Tomonori fb3475e9b6 iommu sg: powerpc: convert iommu to use the IOMMU helper
This patch converts PPC's IOMMU to use the IOMMU helper functions.  The IOMMU
doesn't allocate a memory area spanning LLD's segment boundary anymore.

iseries_hv_alloc and iseries_hv_map don't have proper device
struct. 4GB boundary is used for them.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:11 -08:00
Julia Lawall af449c330e [POWERPC] arch/powerpc: Add missing of_node_put
There should be an of_node_put when breaking out of a loop that iterates
over calls to of_find_all_nodes, as this function does an of_node_get on
the value it returns.

This was fixed using the following semantic patch.
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T;
identifier d;
expression e;
@@

T *d;
...
for (d = NULL; (d = of_find_all_nodes(d)) != NULL; )
 {... when != of_node_put(d)
      when != e = d
(
   return d;
|
+  of_node_put(d);
?  return ...;
)
...}
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 17:13:51 +11:00
Stephen Rothwell dd9b67ab37 [POWERPC] Remove more iSeries-specific stuff from vio.c
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11 20:40:46 +10:00
Stephen Rothwell 1670b2b271 [POWERPC] Remove iSeries_vio_dev
It was only being used to carry around dma_iommu_ops and vio_iommu_table
which we can use directly instead.  This also means that vio_bus_device
doesn't need to refer to them either.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11 20:40:45 +10:00
Stephen Rothwell e2eb63927b [POWERPC] Rename get_property to of_get_property: arch/powerpc
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:19 +10:00
Stephen Rothwell 9874777016 [POWERPC] Create and use set_pci_dma_ops
This will allow us to build without PCI easier.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-09 15:03:25 +11:00
Yan Burman f8485350c2 [POWERPC] Replace kmalloc+memset with kzalloc
Replace kmalloc+memset with kzalloc.

Signed-off-by: Yan Burman <burman.yan@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:42:09 +11:00
Benjamin Herrenschmidt 12d04eef92 [POWERPC] Refactor 64 bits DMA operations
This patch completely refactors DMA operations for 64 bits powerpc. 32 bits
is untouched for now.

We use the new dev_archdata structure to add the dma operations pointer
and associated data to struct device. While at it, we also add the OF node
pointer and numa node. In the future, we might want to look into merging
that with pci_dn as well.

The old vio, pci-iommu and pci-direct DMA ops are gone. They are now replaced
by a set of generic iommu and direct DMA ops (non PCI specific) that can be
used by bus types. The toplevel implementation is now inline.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:38:40 +11:00
Linas Vepstas 5d2efba64b [POWERPC] Use 4kB iommu pages even on 64kB-page systems
The 10Gigabit ethernet device drivers appear to be able to chew
up all 256MB of TCE mappings on pSeries systems, as evidenced by
numerous error messages:

 iommu_alloc failed, tbl c0000000010d5c48 vaddr c0000000d875eff0 npages 1

Some experimentation indicates that this is essentially because
one 1500 byte ethernet MTU gets mapped as a 64K DMA region when
the large 64K pages are enabled. Thus, it doesn't take much to
exhaust all of the available DMA mappings for a high-speed card.

This patch changes the iommu allocator to work with its own
unique, distinct page size. Although the patch is long, its
actually quite simple: it just #defines a distinct IOMMU_PAGE_SIZE
and then uses this in all the places that matter.

As a side effect, it also dramatically improves network performance
on platforms with H-calls on iommu translation inserts/removes (since
we no longer call it 16 times for a 1500 bytes packet when the iommu HW
is still 4k).

In the future, we might want to make the IOMMU_PAGE_SIZE a variable
in the iommu_table instance, thus allowing support for different HW
page sizes in the iommu itself.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-01 14:52:48 +11:00
Jeremy Kerr c4c7cba90c [POWERPC] iseries: Constify & voidify get_property()
Now that get_property() returns a void *, there's no need to cast its
return value. Also, treat the return value as const, so we can
constify get_property later.

iseries platform changes.

Built for iseries_defconfig

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-31 15:55:04 +10:00
Michael Ellerman ca652c9396 [POWERPC] iseries: Move iommu_table_cb into platforms/iseries
Although we pass the address of an iommu_table_cb to HvCallXm_getTceTableParms,
we don't actually need the structure definition anywhere except in the
iseries iommu code, so move the struct in there.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-07-14 17:26:59 +10:00
Anton Blanchard ca1588e71b [POWERPC] node local IOMMU tables
Allocate IOMMU tables local to the relevant node.

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15 19:31:26 +10:00
Stephen Rothwell 403fac4f83 [PATCH] powerpc: remove LogicalSlot from pci_dn
As we now store enough information in the device_node.

Also the Flags field was not used either, do remove that.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-24 16:08:56 +10:00
Stephen Rothwell 96ff6afaf1 [PATCH] powerpc: remove iSeries_Global_Device_List
We can now scan the list of device nodes instead.  This also allows us
to remove the Device_list member of struct pci_dn.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-24 16:08:56 +10:00
Olof Johansson bc97ce951c [PATCH] powerpc: kill union tce_entry
It's been long overdue to kill the union tce_entry in the pSeries/iSeries
TCE code, especially since I asked the Summit guys to do it on the code
they copied from us.

Also, while I was at it, I cleaned up some whitespace.

Built and booted on pSeries, built on iSeries.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-29 18:07:54 +10:00
Stephen Rothwell c7f0e8cb56 [PATCH] powerpc: merge the rest of the vio code
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-29 18:02:02 +10:00
Stephen Rothwell 9bd7ea60b1 [PATCH] powerpc: clean up iommu.h a bit
There was a function declared for CONFIG_PSERIES which no longer exists
and the two function declarations for CONFIG_ISERIES have been moved
into an include file in platforms/iseries since they are defined and
used only there.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12 20:09:30 +11:00
Olof Johansson 91f14480a5 [PATCH] powerpc: update my email address
Email address update, changing old work address to personal (permanent)
one.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-23 21:23:20 +11:00
Benjamin Herrenschmidt 3c726f8dee [PATCH] ppc64: support 64k pages
Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel
base page size to 64K.  The resulting kernel still boots on any
hardware.  On current machines with 4K pages support only, the kernel
will maintain 16 "subpages" for each 64K page transparently.

Note that while real 64K capable HW has been tested, the current patch
will not enable it yet as such hardware is not released yet, and I'm
still verifying with the firmware architects the proper to get the
information from the newer hypervisors.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-06 16:56:47 -08:00
Kelly Daly 8021b8a776 merge filename and modify references to iseries/hv_call_xm.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 11:41:12 +11:00
Stephen Rothwell 20f48ccfa0 powerpc: eliminate DsaAddr from pci_dn
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-14 16:49:58 +10:00
Stephen Rothwell bffa8fc383 powerpc: remove ISERIES_[SUB]BUS macros
This allows us to simplify a couple of things.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-14 15:06:10 +10:00
Stephen Rothwell 426c1a11a6 powerpc: move iSeries/iSeries_pci.h to platforms/iseries
The only real user of this file outside platforms/iseries was
drivers/net/iseries_veth.c but all it wanted was ISERIES_HV_ADDR()
so we move that to abs_addr.h (and lowercase it).

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-14 14:51:42 +10:00
Paul Mackerras 76f9f87fa5 powerpc: Get iseries to compile with ARCH=powerpc
This moves the Device_List member from struct device_node to
struct pci_dn, which cleans up the device_node and makes the code
a little simpler.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:52:26 +10:00
Stephen Rothwell 252e75a51d ppc64 iSeries: use device_node instead of iSeries_Device_node
There needs to be more cleanup after this.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28 14:40:40 +10:00
Stephen Rothwell cc14d43083 powerpc: Move iSeries_iommu.c to powerpc/platforms/iseries
And rename it to iommu.c

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28 02:32:16 +10:00