Граф коммитов

611 Коммитов

Автор SHA1 Сообщение Дата
Yang Yingliang 4d11af5d00 netlink: add spaces around '&' in netlink_recv/sendmsg()
It's hard to read the code without spaces around '&',
for better reading, add spaces around '&'.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 16:53:47 -07:00
Jakub Kicinski 44a8c4f33c Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.

Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe6444 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-04 21:28:59 -07:00
Linus Torvalds 3e8d3bdc2a Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:

 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi
    Kivilinna.

 2) Fix loss of RTT samples in rxrpc, from David Howells.

 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu.

 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka.

 5) We disable BH for too lokng in sctp_get_port_local(), add a
    cond_resched() here as well, from Xin Long.

 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu.

 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from
    Yonghong Song.

 8) Missing of_node_put() in mt7530 DSA driver, from Sumera
    Priyadarsini.

 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan.

10) Fix geneve tunnel checksumming bug in hns3, from Yi Li.

11) Memory leak in rxkad_verify_response, from Dinghao Liu.

12) In tipc, don't use smp_processor_id() in preemptible context. From
    Tuong Lien.

13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu.

14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter.

15) Fix ABI mismatch between driver and firmware in nfp, from Louis
    Peens.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits)
  net/smc: fix sock refcounting in case of termination
  net/smc: reset sndbuf_desc if freed
  net/smc: set rx_off for SMCR explicitly
  net/smc: fix toleration of fake add_link messages
  tg3: Fix soft lockup when tg3_reset_task() fails.
  doc: net: dsa: Fix typo in config code sample
  net: dp83867: Fix WoL SecureOn password
  nfp: flower: fix ABI mismatch between driver and firmware
  tipc: fix shutdown() of connectionless socket
  ipv6: Fix sysctl max for fib_multipath_hash_policy
  drivers/net/wan/hdlc: Change the default of hard_header_len to 0
  net: gemini: Fix another missing clk_disable_unprepare() in probe
  net: bcmgenet: fix mask check in bcmgenet_validate_flow()
  amd-xgbe: Add support for new port mode
  net: usb: dm9601: Add USB ID of Keenetic Plus DSL
  vhost: fix typo in error message
  net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init()
  pktgen: fix error message with wrong function name
  net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode
  cxgb4: fix thermal zone device registration
  ...
2020-09-03 18:50:48 -07:00
Johannes Berg c30a3c957c netlink: policy: correct validation type check
In the policy export for binary attributes I erroneously used
a != NLA_VALIDATE_NONE comparison instead of checking for the
two possible values, which meant that if a validation function
pointer ended up aliasing the min/max as negatives, we'd hit
a warning in nla_get_range_unsigned().

Fix this to correctly check for only the two types that should
be handled here, i.e. range with or without warn-too-long.

Reported-by: syzbot+353df1490da781637624@syzkaller.appspotmail.com
Fixes: 8aa26c575f ("netlink: make NLA_BINARY validation more flexible")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31 12:01:15 -07:00
zhudi 174bce38ca netlink: fix a data race in netlink_rcv_wake()
The data races were reported by KCSAN:
BUG: KCSAN: data-race in netlink_recvmsg / skb_queue_tail

write (marked) to 0xffff8c0986e5a8c8 of 8 bytes by interrupt on cpu 3:
 skb_queue_tail+0xcc/0x120
 __netlink_sendskb+0x55/0x80
 netlink_broadcast_filtered+0x465/0x7e0
 nlmsg_notify+0x8f/0x120
 rtnl_notify+0x8e/0xb0
 __neigh_notify+0xf2/0x120
 neigh_update+0x927/0xde0
 arp_process+0x8a3/0xf50
 arp_rcv+0x27c/0x3b0
 __netif_receive_skb_core+0x181c/0x1840
 __netif_receive_skb+0x38/0xf0
 netif_receive_skb_internal+0x77/0x1c0
 napi_gro_receive+0x1bd/0x1f0
 e1000_clean_rx_irq+0x538/0xb20 [e1000]
 e1000_clean+0x5e4/0x1340 [e1000]
 net_rx_action+0x310/0x9d0
 __do_softirq+0xe8/0x308
 irq_exit+0x109/0x110
 do_IRQ+0x7f/0xe0
 ret_from_intr+0x0/0x1d
 0xffffffffffffffff

read to 0xffff8c0986e5a8c8 of 8 bytes by task 1463 on cpu 0:
 netlink_recvmsg+0x40b/0x820
 sock_recvmsg+0xc9/0xd0
 ___sys_recvmsg+0x1a4/0x3b0
 __sys_recvmsg+0x86/0x120
 __x64_sys_recvmsg+0x52/0x70
 do_syscall_64+0xb5/0x360
 entry_SYSCALL_64_after_hwframe+0x65/0xca
 0xffffffffffffffff

Since the write is under sk_receive_queue->lock but the read
is done as lockless. so fix it by using skb_queue_empty_lockless()
instead of skb_queue_empty() for the read in netlink_rcv_wake()

Signed-off-by: zhudi <zhudi21@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28 06:51:11 -07:00
Randy Dunlap 8540591885 net: netlink: delete repeated words
Drop duplicated words in net/netlink/.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24 17:31:20 -07:00
Gustavo A. R. Silva df561f6688 treewide: Use fallthrough pseudo-keyword
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-23 17:36:59 -05:00
David S. Miller 7611cbb900 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2020-08-23 11:48:27 -07:00
Johannes Berg d1fb555929 netlink: fix state reallocation in policy export
Evidently, when I did this previously, we didn't have more than
10 policies and didn't run into the reallocation path, because
it's missing a memset() for the unused policies. Fix that.

Fixes: d07dcf9aad ("netlink: add infrastructure to expose policies to userspace")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-19 15:39:36 -07:00
Johannes Berg 8aa26c575f netlink: make NLA_BINARY validation more flexible
Add range validation for NLA_BINARY, allowing validation of any
combination of combination minimum or maximum lengths, using the
existing NLA_POLICY_RANGE()/NLA_POLICY_FULL_RANGE() macros, just
like for integers where the value is checked.

Also make NLA_POLICY_EXACT_LEN(), NLA_POLICY_EXACT_LEN_WARN()
and NLA_POLICY_MIN_LEN() special cases of this, removing the old
types NLA_EXACT_LEN and NLA_MIN_LEN.

This allows us to save some code where both minimum and maximum
lengths are requires, currently the policy only allows maximum
(NLA_BINARY), minimum (NLA_MIN_LEN) or exact (NLA_EXACT_LEN), so
a range of lengths cannot be accepted and must be checked by the
code that consumes the attributes later.

Also, this allows advertising the correct ranges in the policy
export to userspace. Here, NLA_MIN_LEN and NLA_EXACT_LEN already
were special cases of NLA_BINARY with min and min/max length
respectively.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-18 12:28:45 -07:00
Linus Torvalds 96e3f3c16b - Add support to enable/disable the thermal zones resulting on core code and
drivers cleanup (Andrzej Pietrasiewicz)
 
 - Add generic netlink support for userspace notifications: events, temperature
   and discovery commands (Daniel Lezcano)
 
 - Fix redundant initialization for a ret variable (Colin Ian King)
 
 - Remove the clock cooling code as it is used nowhere (Amit Kucheria)
 
 - Add the rcar_gen3_thermal's r8a774e1 support (Marian-Cristian Rotariu)
 
 - Replace all references to thermal.txt in the documentation to the
   corresponding yaml files (Amit Kucheria)
 
 - Add maintainer entry for the IPA (Lukasz Luba)
 
 - Add support for MSM8939 for the tsens (Shawn Guo)
 
 - Update power allocator and devfreq cooling to SPDX licensing (Lukasz Luba)
 
 - Add Cannon Lake Low Power PCH support (Sumeet Pawnikar)
 
 - Add tsensor support for V2 mediatek thermal system (Henry Yen)
 
 - Fix thermal zone lookup by ID for the core code (Thierry Reding)
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAl8q7tsACgkQqDIjiipP
 6E+5Rwf7BFEn5YXPvng8cmnAlgvEBc9DdT6mGSo0NpFm9MdUxXlaqvw3WWSGyqWQ
 +z0Ka7lmn5XyiMsVN11++Snp+79X17HzZf9SXO3glyIpAn+5prTDRhzzj0/jPrtS
 sEeI++DrILsKKMGVljzftLmwNJN9DkUDNcnmWmZdCDbYVEKtP9Pjf2wBjAnXj7sX
 JA3CkHRMwYLEQbfaKz37M11cYM+LqbDOlb6U11YWgAGGJ7d7zNYRf2/YSYPM4AN6
 iE6j0E+3jIlXesULsap1AzeJaBq+wFxj1FL2TUZ8KscvRrm3AucqzNAT2M/Bc5Az
 XLKKzc6Gp9JfqB5KXhX2EDu7VRnDBg==
 =cSMN
 -----END PGP SIGNATURE-----

Merge tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

 - Add support to enable/disable the thermal zones resulting on core
   code and drivers cleanup (Andrzej Pietrasiewicz)

 - Add generic netlink support for userspace notifications: events,
   temperature and discovery commands (Daniel Lezcano)

 - Fix redundant initialization for a ret variable (Colin Ian King)

 - Remove the clock cooling code as it is used nowhere (Amit Kucheria)

 - Add the rcar_gen3_thermal's r8a774e1 support (Marian-Cristian
   Rotariu)

 - Replace all references to thermal.txt in the documentation to the
   corresponding yaml files (Amit Kucheria)

 - Add maintainer entry for the IPA (Lukasz Luba)

 - Add support for MSM8939 for the tsens (Shawn Guo)

 - Update power allocator and devfreq cooling to SPDX licensing (Lukasz
   Luba)

 - Add Cannon Lake Low Power PCH support (Sumeet Pawnikar)

 - Add tsensor support for V2 mediatek thermal system (Henry Yen)

 - Fix thermal zone lookup by ID for the core code (Thierry Reding)

* tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (40 commits)
  thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH support
  thermal: mediatek: Add tsensor support for V2 thermal system
  thermal: mediatek: Prepare to add support for other platforms
  thermal: Update power allocator and devfreq cooling to SPDX licensing
  MAINTAINERS: update entry to thermal governors file name prefixing
  thermal: core: Add thermal zone enable/disable notification
  thermal: qcom: tsens-v0_1: Add support for MSM8939
  dt-bindings: tsens: qcom: Document MSM8939 compatible
  thermal: core: Fix thermal zone lookup by ID
  thermal: int340x: processor_thermal: fix: update Jasper Lake PCI id
  thermal: imx8mm: Support module autoloading
  thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor()
  MAINTAINERS: Add maintenance information for IPA
  thermal: rcar_gen3_thermal: Do not shadow thcode variable
  dt-bindings: thermal: Get rid of thermal.txt and replace references
  thermal: core: Move initialization after core initcall
  thermal: netlink: Improve the initcall ordering
  net: genetlink: Move initialization to core_initcall
  thermal: rcar_gen3_thermal: Add r8a774e1 support
  thermal/drivers/clock_cooling: Remove clock_cooling code
  ...
2020-08-06 18:10:55 -07:00
Yonghong Song 14fc6bd6b7 bpf: Refactor bpf_iter_reg to have separate seq_info member
There is no functionality change for this patch.
Struct bpf_iter_reg is used to register a bpf_iter target,
which includes information for both prog_load, link_create
and seq_file creation.

This patch puts fields related seq_file creation into
a different structure. This will be useful for map
elements iterator where one iterator covers different
map types and different map types may have different
seq_ops, init/fini private_data function and
private_data size.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723184109.590030-1-yhs@fb.com
2020-07-25 20:16:32 -07:00
Christoph Hellwig a7b75c5a8c net: pass a sockptr_t into ->setsockopt
Rework the remaining setsockopt code to pass a sockptr_t instead of a
plain user pointer.  This removes the last remaining set_fs(KERNEL_DS)
outside of architecture specific code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154]
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-24 15:41:54 -07:00
Yonghong Song 951cf368bc bpf: net: Use precomputed btf_id for bpf iterators
One additional field btf_id is added to struct
bpf_ctx_arg_aux to store the precomputed btf_ids.
The btf_id is computed at build time with
BTF_ID_LIST or BTF_ID_LIST_GLOBAL macro definitions.
All existing bpf iterators are changed to used
pre-compute btf_ids.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200720163403.1393551-1-yhs@fb.com
2020-07-21 13:26:26 -07:00
Daniel Lezcano c62e7ac395 net: genetlink: Move initialization to core_initcall
The generic netlink is initialized far after the netlink protocol
itself at subsys_initcall. The devlink is initialized at the same
level, but after, as shown by a disassembly of the vmlinux:

[ ... ]
374 ffff8000115f22c0 <__initcall_devlink_init4>:
375 ffff8000115f22c4 <__initcall_genl_init4>:
[ ... ]

The function devlink_init() calls genl_register_family() before the
generic netlink subsystem is initialized.

As the generic netlink initcall level is set since 2005, it seems that
was not a problem, but now we have the thermal framework initialized
at the core_initcall level which creates the generic netlink family
and sends a notification which leads to a subtle memory corruption
only detectable when the CONFIG_INIT_ON_ALLOC_DEFAULT_ON option is set
with the earlycon at init time.

The thermal framework needs to be initialized early in order to begin
the mitigation as soon as possible. Moving it to postcore_initcall is
acceptable.

This patch changes the initialization level for the generic netlink
family to the core_initcall and comes after the netlink protocol
initialization.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: David S. Miller <davem@davemloft.net>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/20200715074120.8768-1-daniel.lezcano@linaro.org
2020-07-21 10:40:08 +02:00
Sean Tranchetti 1e82a62fec genetlink: remove genl_bind
A potential deadlock can occur during registering or unregistering a
new generic netlink family between the main nl_table_lock and the
cb_lock where each thread wants the lock held by the other, as
demonstrated below.

1) Thread 1 is performing a netlink_bind() operation on a socket. As part
   of this call, it will call netlink_lock_table(), incrementing the
   nl_table_users count to 1.
2) Thread 2 is registering (or unregistering) a genl_family via the
   genl_(un)register_family() API. The cb_lock semaphore will be taken for
   writing.
3) Thread 1 will call genl_bind() as part of the bind operation to handle
   subscribing to GENL multicast groups at the request of the user. It will
   attempt to take the cb_lock semaphore for reading, but it will fail and
   be scheduled away, waiting for Thread 2 to finish the write.
4) Thread 2 will call netlink_table_grab() during the (un)registration
   call. However, as Thread 1 has incremented nl_table_users, it will not
   be able to proceed, and both threads will be stuck waiting for the
   other.

genl_bind() is a noop, unless a genl_family implements the mcast_bind()
function to handle setting up family-specific multicast operations. Since
no one in-tree uses this functionality as Cong pointed out, simply removing
the genl_bind() function will remove the possibility for deadlock, as there
is no attempt by Thread 1 above to take the cb_lock semaphore.

Fixes: c380d9a7af ("genetlink: pass multicast bind/unbind to families")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Johannes Berg <johannes.berg@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-01 15:49:11 -07:00
Cong Wang bf64ff4c2a genetlink: get rid of family->attrbuf
genl_family_rcv_msg_attrs_parse() reuses the global family->attrbuf
when family->parallel_ops is false. However, family->attrbuf is not
protected by any lock on the genl_family_rcv_msg_doit() code path.

This leads to several different consequences, one of them is UAF,
like the following:

genl_family_rcv_msg_doit():		genl_start():
					  genl_family_rcv_msg_attrs_parse()
					    attrbuf = family->attrbuf
					    __nlmsg_parse(attrbuf);
  genl_family_rcv_msg_attrs_parse()
    attrbuf = family->attrbuf
    __nlmsg_parse(attrbuf);
					  info->attrs = attrs;
					  cb->data = info;

netlink_unicast_kernel():
 consume_skb()
					genl_lock_dumpit():
					  genl_dumpit_info(cb)->attrs

Note family->attrbuf is an array of pointers to the skb data, once
the skb is freed, any dereference of family->attrbuf will be a UAF.

Maybe we could serialize the family->attrbuf with genl_mutex too, but
that would make the locking more complicated. Instead, we can just get
rid of family->attrbuf and always allocate attrbuf from heap like the
family->parallel_ops==true code path. This may add some performance
overhead but comparing with taking the global genl_mutex, it still
looks better.

Fixes: 75cdbdd089 ("net: ieee802154: have genetlink code to parse the attrs during dumpit")
Fixes: 057af70713 ("net: tipc: have genetlink code to parse the attrs during dumpit")
Reported-and-tested-by: syzbot+3039ddf6d7b13daf3787@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+80cad1e3cb4c41cde6ff@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+736bcbcb11b60d0c0792@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+520f8704db2b68091d44@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+c96e4dfb32f8987fdeed@syzkaller.appspotmail.com
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-29 17:15:57 -07:00
Linus Torvalds 96144c58ab Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:

 1) Fix cfg80211 deadlock, from Johannes Berg.

 2) RXRPC fails to send norigications, from David Howells.

 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from
    Geliang Tang.

 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu.

 5) The ucc_geth driver needs __netdev_watchdog_up exported, from
    Valentin Longchamp.

 6) Fix hashtable memory leak in dccp, from Wang Hai.

 7) Fix how nexthops are marked as FDB nexthops, from David Ahern.

 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni.

 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien.

10) Fix link speed reporting in iavf driver, from Brett Creeley.

11) When a channel is used for XSK and then reused again later for XSK,
    we forget to clear out the relevant data structures in mlx5 which
    causes all kinds of problems. Fix from Maxim Mikityanskiy.

12) Fix memory leak in genetlink, from Cong Wang.

13) Disallow sockmap attachments to UDP sockets, it simply won't work.
    From Lorenz Bauer.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
  net: ethernet: ti: ale: fix allmulti for nu type ale
  net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
  net: atm: Remove the error message according to the atomic context
  bpf: Undo internal BPF_PROBE_MEM in BPF insns dump
  libbpf: Support pre-initializing .bss global variables
  tools/bpftool: Fix skeleton codegen
  bpf: Fix memlock accounting for sock_hash
  bpf: sockmap: Don't attach programs to UDP sockets
  bpf: tcp: Recv() should return 0 when the peer socket is closed
  ibmvnic: Flush existing work items before device removal
  genetlink: clean up family attributes allocations
  net: ipa: header pad field only valid for AP->modem endpoint
  net: ipa: program upper nibbles of sequencer type
  net: ipa: fix modem LAN RX endpoint id
  net: ipa: program metadata mask differently
  ionic: add pcie_print_link_status
  rxrpc: Fix race between incoming ACK parser and retransmitter
  net/mlx5: E-Switch, Fix some error pointer dereferences
  net/mlx5: Don't fail driver on failure to create debugfs
  net/mlx5e: CT: Fix ipv6 nat header rewrite actions
  ...
2020-06-13 16:27:13 -07:00
Masahiro Yamada a7f7f6248d treewide: replace '---help---' in Kconfig files with 'help'
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-14 01:57:21 +09:00
Cong Wang b65ce380b7 genetlink: clean up family attributes allocations
genl_family_rcv_msg_attrs_parse() and genl_family_rcv_msg_attrs_free()
take a boolean parameter to determine whether allocate/free the family
attrs. This is unnecessary as we can just check family->parallel_ops.
More importantly, callers would not need to worry about pairing these
parameters correctly after this patch.

And this fixes a memory leak, as after commit c36f055591
("genetlink: fix memory leaks in genl_family_rcv_msg_dumpit()")
we call genl_family_rcv_msg_attrs_parse() for both parallel and
non-parallel cases.

Fixes: c36f055591 ("genetlink: fix memory leaks in genl_family_rcv_msg_dumpit()")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-12 14:05:08 -07:00
Cong Wang c36f055591 genetlink: fix memory leaks in genl_family_rcv_msg_dumpit()
There are two kinds of memory leaks in genl_family_rcv_msg_dumpit():

1. Before we call ops->start(), whenever an error happens, we forget
   to free the memory allocated in genl_family_rcv_msg_dumpit().

2. When ops->start() fails, the 'info' has been already installed on
   the per socket control block, so we should not free it here. More
   importantly, nlk->cb_running is still false at this point, so
   netlink_sock_destruct() cannot free it either.

The first kind of memory leaks is easier to resolve, but the second
one requires some deeper thoughts.

After reviewing how netfilter handles this, the most elegant solution
I find is just to use a similar way to allocate the memory, that is,
moving memory allocations from caller into ops->start(). With this,
we can solve both kinds of memory leaks: for 1), no memory allocation
happens before ops->start(); for 2), ops->start() handles its own
failures and 'info' is installed to the socket control block only
when success. The only ugliness here is we have to pass all local
variables on stack via a struct, but this is not hard to understand.

Alternatively, we can introduce a ops->free() to solve this too,
but it is overkill as only genetlink has this problem so far.

Fixes: 1927f41a22 ("net: genetlink: introduce dump info struct to be available during dumpit op")
Reported-by: syzbot+21f04f481f449c8db840@syzkaller.appspotmail.com
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Shaochun Chen <cscnull@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-04 15:33:45 -07:00
Yonghong Song 3c32cc1bce bpf: Enable bpf_iter targets registering ctx argument types
Commit b121b341e5 ("bpf: Add PTR_TO_BTF_ID_OR_NULL
support") adds a field btf_id_or_null_non0_off to
bpf_prog->aux structure to indicate that the
first ctx argument is PTR_TO_BTF_ID reg_type and
all others are PTR_TO_BTF_ID_OR_NULL.
This approach does not really scale if we have
other different reg types in the future, e.g.,
a pointer to a buffer.

This patch enables bpf_iter targets registering ctx argument
reg types which may be different from the default one.
For example, for pointers to structures, the default reg_type
is PTR_TO_BTF_ID for tracing program. The target can register
a particular pointer type as PTR_TO_BTF_ID_OR_NULL which can
be used by the verifier to enforce accesses.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200513180221.2949882-1-yhs@fb.com
2020-05-13 12:30:50 -07:00
Yonghong Song 15172a46fa bpf: net: Refactor bpf_iter target registration
Currently bpf_iter_reg_target takes parameters from target
and allocates memory to save them. This is really not
necessary, esp. in the future we may grow information
passed from targets to bpf_iter manager.

The patch refactors the code so target reg_info
becomes static and bpf_iter manager can just take
a reference to it.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200513180219.2949605-1-yhs@fb.com
2020-05-13 12:30:50 -07:00
Yonghong Song 138d0be35b net: bpf: Add netlink and ipv6_route bpf_iter targets
This patch added netlink and ipv6_route targets, using
the same seq_ops (except show() and minor changes for stop())
for /proc/net/{netlink,ipv6_route}.

The net namespace for these targets are the current net
namespace at file open stage, similar to
/proc/net/{netlink,ipv6_route} reference counting
the net namespace at seq_file open stage.

Since module is not supported for now, ipv6_route is
supported only if the IPV6 is built-in, i.e., not compiled
as a module. The restriction can be lifted once module
is properly supported for bpf_iter.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175910.2476329-1-yhs@fb.com
2020-05-09 17:05:26 -07:00
Johannes Berg d07dcf9aad netlink: add infrastructure to expose policies to userspace
Add, and use in generic netlink, helpers to dump out a netlink
policy to userspace, including all the range validation data,
nested policies etc.

This lets userspace discover what the kernel understands.

For families/commands other than generic netlink, the helpers
need to be used directly in an appropriate command, or we can
add some infrastructure (a new netlink family) that those can
register their policies with for introspection. I'm not that
familiar with non-generic netlink, so that's left out for now.

The data exposed to userspace also includes min and max length
for binary/string data, I've done that instead of letting the
userspace tools figure out whether min/max is intended based
on the type so that we can extend this later in the kernel, we
might want to just use the range data for example.

Because of this, I opted to not directly expose the NLA_*
values, even if some of them are already exposed via BPF, as
with min/max length we don't need to have different types here
for NLA_BINARY/NLA_MIN_LEN/NLA_EXACT_LEN, we just make them
all NL_ATTR_TYPE_BINARY with min/max length optionally set.

Similarly, we don't really need NLA_MSECS, and perhaps can
remove it in the future - but not if we encode it into the
userspace API now. It gets mapped to NL_ATTR_TYPE_U64 here.

Note that the exposing here corresponds to the strict policy
interpretation, and NLA_UNSPEC items are omitted entirely.
To get those, change them to NLA_MIN_LEN which behaves in
exactly the same way, but is exposed.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30 17:51:42 -07:00
David S. Miller 9fb16955fb Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Overlapping header include additions in macsec.c

A bug fix in 'net' overlapping with the removal of 'version'
string in ena_netdev.c

Overlapping test additions in selftests Makefile

Overlapping PCI ID table adjustments in iwlwifi driver.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 18:58:11 -07:00
Michal Kubecek fe2a31d790 netlink: allow extack cookie also for error messages
Commit ba0dc5f6e0 ("netlink: allow sending extended ACK with cookie on
success") introduced a cookie which can be sent to userspace as part of
extended ack message in the form of NLMSGERR_ATTR_COOKIE attribute.
Currently the cookie is ignored if error code is non-zero but there is
no technical reason for such limitation and it can be useful to provide
machine parseable information as part of an error message.

Include NLMSGERR_ATTR_COOKIE whenever the cookie has been set,
regardless of error code.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16 02:04:24 -07:00
David S. Miller 1d34357931 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Minor overlapping changes, nothing serious.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 22:34:48 -07:00
Jules Irenge 64fbca0119 net: Add missing annotation for *netlink_seq_start()
Sparse reports a warning at netlink_seq_start()

warning: context imbalance in netlink_seq_start() - wrong count at exit
The root cause is the missing annotation at netlink_seq_start()
Add the missing  __acquires(RCU) annotation

Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11 23:19:41 -07:00
Pablo Neira Ayuso 84b3268027 netlink: Use netlink header as base to calculate bad attribute offset
Userspace might send a batch that is composed of several netlink
messages. The netlink_ack() function must use the pointer to the netlink
header as base to calculate the bad attribute offset.

Fixes: 2d4bc93368 ("netlink: extended ACK reporting")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29 21:21:23 -08:00
David S. Miller 9f6e055907 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
The mptcp conflict was overlapping additions.

The SMC conflict was an additional and removal happening at the same
time.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27 18:31:39 -08:00
Paolo Abeni 39f3b41aa7 net: genetlink: return the error code when attribute parsing fails.
Currently if attribute parsing fails and the genl family
does not support parallel operation, the error code returned
by __nlmsg_parse() is discarded by genl_family_rcv_msg_attrs_parse().

Be sure to report the error for all genl families.

Fixes: c10e6cf85e ("net: genetlink: push attrbuf allocation and parsing to a separate function")
Fixes: ab5b526da0 ("net: genetlink: always allocate separate attrs for dumpit ops")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-22 21:58:33 -08:00
David S. Miller e65ee2fb54 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflict resolution of ice_virtchnl_pf.c based upon work by
Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-21 13:39:34 -08:00
Nikolay Aleksandrov 3a20773bee net: netlink: cap max groups which will be considered in netlink_bind()
Since nl_groups is a u32 we can't bind more groups via ->bind
(netlink_bind) call, but netlink has supported more groups via
setsockopt() for a long time and thus nlk->ngroups could be over 32.
Recently I added support for per-vlan notifications and increased the
groups to 33 for NETLINK_ROUTE which exposed an old bug in the
netlink_bind() code causing out-of-bounds access on archs where unsigned
long is 32 bits via test_bit() on a local variable. Fix this by capping the
maximum groups in netlink_bind() to BITS_PER_TYPE(u32), effectively
capping them at 32 which is the minimum of allocated groups and the
maximum groups which can be bound via netlink_bind().

CC: Christophe Leroy <christophe.leroy@c-s.fr>
CC: Richard Guy Briggs <rgb@redhat.com>
Fixes: 4f52090052 ("netlink: have netlink per-protocol bind function return an error code.")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20 16:02:08 -08:00
Gustavo A. R. Silva 2b73812483 net: netlink: Replace zero-length array with flexible-array member
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-17 19:05:06 -08:00
Pankaj Bharadiya c593642c8b treewide: Use sizeof_field() macro
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except
at places where these are defined. Later patches will remove the unused
definition of FIELD_SIZEOF().

This patch is generated using following script:

EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h"

git grep -l -e "\bFIELD_SIZEOF\b" | while read file;
do

	if [[ "$file" =~ $EXCLUDE_FILES ]]; then
		continue
	fi
	sed -i  -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file;
done

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David Miller <davem@davemloft.net> # for net
2019-12-09 10:36:44 -08:00
Michal Kubecek cb0ce18aaf genetlink: do not parse attributes for families with zero maxattr
Commit c10e6cf85e ("net: genetlink: push attrbuf allocation and parsing
to a separate function") moved attribute buffer allocation and attribute
parsing from genl_family_rcv_msg_doit() into a separate function
genl_family_rcv_msg_attrs_parse() which, unlike the previous code, calls
__nlmsg_parse() even if family->maxattr is 0 (i.e. the family does its own
parsing). The parser error is ignored and does not propagate out of
genl_family_rcv_msg_attrs_parse() but an error message ("Unknown attribute
type") is set in extack and if further processing generates no error or
warning, it stays there and is interpreted as a warning by userspace.

Dumpit requests are not affected as genl_family_rcv_msg_dumpit() bypasses
the call of genl_family_rcv_msg_attrs_parse() if family->maxattr is zero.
Move this logic inside genl_family_rcv_msg_attrs_parse() so that we don't
have to handle it in each caller.

v3: put the check inside genl_family_rcv_msg_attrs_parse()
v2: adjust also argument of genl_family_rcv_msg_attrs_free()

Fixes: c10e6cf85e ("net: genetlink: push attrbuf allocation and parsing to a separate function")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-13 11:20:03 -07:00
Jiri Pirko ab5b526da0 net: genetlink: always allocate separate attrs for dumpit ops
Individual dumpit ops (start, dumpit, done) are locked by genl_lock
if !family->parallel_ops. However, multiple
genl_family_rcv_msg_dumpit() calls may in in flight in parallel.
Each has a separate struct genl_dumpit_info allocated
but they share the same family->attrbuf. Fix this by allocating separate
memory for attrs for dumpit ops, for non-parallel_ops (for parallel_ops
it is done already).

Reported-by: syzbot+495688b736534bb6c6ad@syzkaller.appspotmail.com
Reported-by: syzbot+ff59dc711f2cff879a05@syzkaller.appspotmail.com
Reported-by: syzbot+dbe02e13bcce52bcf182@syzkaller.appspotmail.com
Reported-by: syzbot+9cb7edb2906ea1e83006@syzkaller.appspotmail.com
Fixes: bf813b0afe ("net: genetlink: parse attrs and store in contect info struct during dumpit")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08 18:00:08 -07:00
Jiri Pirko 265ecd4fa3 net: genetlink: remove unused genl_family_attrbuf()
genl_family_attrbuf() function is no longer used by anyone, so remove it.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06 15:44:47 +02:00
Jiri Pirko bf813b0afe net: genetlink: parse attrs and store in contect info struct during dumpit
Extend the dumpit info struct for attrs. Instead of existing attribute
validation do parse them and save in the info struct. Caller can benefit
from this and does not have to do parse itself. In order to properly
free attrs, genl_family pointer needs to be added to dumpit info struct
as well.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06 15:44:47 +02:00
Jiri Pirko c10e6cf85e net: genetlink: push attrbuf allocation and parsing to a separate function
To be re-usable by dumpit as well, push the code that is taking care of
attrbuf allocation and parting from doit into separate function.
Introduce a helper to free the buffer too.

Check family->maxattr too before calling kfree() to be symmetrical with
the allocation check.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06 15:44:46 +02:00
Jiri Pirko 1927f41a22 net: genetlink: introduce dump info struct to be available during dumpit op
Currently the cb->data is taken by ops during non-parallel dumping.
Introduce a new structure genl_dumpit_info and store the ops there.
Distribute the info to both non-parallel and parallel dumping. Also add
a helper genl_dumpit_info() to easily get the info structure in the
dumpit callback from cb.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06 15:44:46 +02:00
Jiri Pirko be064defab net: genetlink: push doit/dumpit code from genl_family_rcv_msg
Currently the function genl_family_rcv_msg() is quite big. Since it is
quite convenient, push code that is related to doit and dumpit ops into
separate functions.

Do small changes on the way, like rc/err unification, NULL check etc.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06 15:44:46 +02:00
Li RongQing 3e18943333 net: remove empty netlink_tap_exit_net
Pointer members of an object with static storage duration, if not
explicitly initialized, will be initialized to a NULL pointer. The
net namespace API checks if this pointer is not NULL before using it,
it are safe to remove the function.

Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14 19:50:33 -07:00
Taehee Yoo abf9979f7e net: netlink: make netlink_walk_start() void return type
netlink_walk_start() needed to return an error code because of
rhashtable_walk_init(). but that was converted to rhashtable_walk_enter()
and it is a void type function. so now netlink_walk_start() doesn't need
any return value.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11 11:55:48 -07:00
Thomas Gleixner 2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00
Linus Torvalds 2c1212de6f SPDX update for 5.2-rc2, round 1
Here are series of patches that add SPDX tags to different kernel files,
 based on two different things:
   - SPDX entries are added to a bunch of files that we missed a year ago
     that do not have any license information at all.
 
     These were either missed because the tool saw the MODULE_LICENSE()
     tag, or some EXPORT_SYMBOL tags, and got confused and thought the
     file had a real license, or the files have been added since the last
     big sweep, or they were Makefile/Kconfig files, which we didn't
     touch last time.
 
   - Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
     tools can determine the license text in the file itself.  Where this
     happens, the license text is removed, in order to cut down on the
     700+ different ways we have in the kernel today, in a quest to get
     rid of all of these.
 
 These patches have been out for review on the linux-spdx@vger mailing
 list, and while they were created by automatic tools, they were
 hand-verified by a bunch of different people, all whom names are on the
 patches are reviewers.
 
 The reason for these "large" patches is if we were to continue to
 progress at the current rate of change in the kernel, adding license
 tags to individual files in different subsystems, we would be finished
 in about 10 years at the earliest.
 
 There will be more series of these types of patches coming over the next
 few weeks as the tools and reviewers crunch through the more "odd"
 variants of how to say "GPLv2" that developers have come up with over
 the years, combined with other fun oddities (GPL + a BSD disclaimer?)
 that are being unearthed, with the goal for the whole kernel to be
 cleaned up.
 
 These diffstats are not small, 3840 files are touched, over 10k lines
 removed in just 24 patches.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXOP8uw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynmGQCgy3evqzleuOITDpuWaxewFdHqiJYAnA7KRw4H
 1KwtfRnMtG6dk/XaS7H7
 =O9lH
 -----END PGP SIGNATURE-----

Merge tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull SPDX update from Greg KH:
 "Here is a series of patches that add SPDX tags to different kernel
  files, based on two different things:

   - SPDX entries are added to a bunch of files that we missed a year
     ago that do not have any license information at all.

     These were either missed because the tool saw the MODULE_LICENSE()
     tag, or some EXPORT_SYMBOL tags, and got confused and thought the
     file had a real license, or the files have been added since the
     last big sweep, or they were Makefile/Kconfig files, which we
     didn't touch last time.

   - Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
     tools can determine the license text in the file itself. Where this
     happens, the license text is removed, in order to cut down on the
     700+ different ways we have in the kernel today, in a quest to get
     rid of all of these.

  These patches have been out for review on the linux-spdx@vger mailing
  list, and while they were created by automatic tools, they were
  hand-verified by a bunch of different people, all whom names are on
  the patches are reviewers.

  The reason for these "large" patches is if we were to continue to
  progress at the current rate of change in the kernel, adding license
  tags to individual files in different subsystems, we would be finished
  in about 10 years at the earliest.

  There will be more series of these types of patches coming over the
  next few weeks as the tools and reviewers crunch through the more
  "odd" variants of how to say "GPLv2" that developers have come up with
  over the years, combined with other fun oddities (GPL + a BSD
  disclaimer?) that are being unearthed, with the goal for the whole
  kernel to be cleaned up.

  These diffstats are not small, 3840 files are touched, over 10k lines
  removed in just 24 patches"

* tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3
  ...
2019-05-21 12:33:38 -07:00
Thomas Gleixner ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Thomas Gleixner 09c434b8a0 treewide: Add SPDX license identifier for more missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have MODULE_LICENCE("GPL*") inside which was used in the initial
   scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00
Patrick Talbert ea9a03791a net: Treat sock->sk_drops as an unsigned int when printing
Currently, procfs socket stats format sk_drops as a signed int (%d). For large
values this will cause a negative number to be printed.

We know the drop count can never be a negative so change the format specifier to
%u.

Signed-off-by: Patrick Talbert <ptalbert@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-19 10:31:10 -07:00