Make it so that this #include line is rendered in monospace, like other
code blocks.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Here is the large set of char/misc/whatever driver subsystem updates for
5.12-rc1. Over time it seems like this tree is collecting more and more
tiny driver subsystems in one place, making it easier for those
maintainers, which is why this is getting larger.
Included in here are:
- coresight driver updates
- habannalabs driver updates
- virtual acrn driver addition (proper acks from the x86
maintainers)
- broadcom misc driver addition
- speakup driver updates
- soundwire driver updates
- fpga driver updates
- amba driver updates
- mei driver updates
- vfio driver updates
- greybus driver updates
- nvmeem driver updates
- phy driver updates
- mhi driver updates
- interconnect driver udpates
- fsl-mc bus driver updates
- random driver fix
- some small misc driver updates (rtsx, pvpanic, etc.)
All of these have been in linux-next for a while, with the only reported
issue being a merge conflict in include/linux/mod_devicetable.h that you
will hit in your tree due to the dfl_device_id addition from the fpga
subsystem in here. The resolution should be simple.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYDZf9w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk3xgCcCEN+pCJTum+uAzSNH3YKs/onaDgAnRSVwOUw
tNW6n1JhXLYl9f5JdhvS
=MOHs
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc/whatever driver subsystem updates
for 5.12-rc1. Over time it seems like this tree is collecting more and
more tiny driver subsystems in one place, making it easier for those
maintainers, which is why this is getting larger.
Included in here are:
- coresight driver updates
- habannalabs driver updates
- virtual acrn driver addition (proper acks from the x86 maintainers)
- broadcom misc driver addition
- speakup driver updates
- soundwire driver updates
- fpga driver updates
- amba driver updates
- mei driver updates
- vfio driver updates
- greybus driver updates
- nvmeem driver updates
- phy driver updates
- mhi driver updates
- interconnect driver udpates
- fsl-mc bus driver updates
- random driver fix
- some small misc driver updates (rtsx, pvpanic, etc.)
All of these have been in linux-next for a while, with the only
reported issue being a merge conflict due to the dfl_device_id
addition from the fpga subsystem in here"
* tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
spmi: spmi-pmic-arb: Fix hw_irq overflow
Documentation: coresight: Add PID tracing description
coresight: etm-perf: Support PID tracing for kernel at EL2
coresight: etm-perf: Clarify comment on perf options
ACRN: update MAINTAINERS: mailing list is subscribers-only
regmap: sdw-mbq: use MODULE_LICENSE("GPL")
regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ
regmap: sdw: use _no_pm functions in regmap_read/write
soundwire: intel: fix possible crash when no device is detected
MAINTAINERS: replace my with email with replacements
mhi: Fix double dma free
uapi: map_to_7segment: Update example in documentation
uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED
drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue
firewire: replace tricky statement by two simple ones
vme: make remove callback return void
firmware: google: make coreboot driver's remove callback return void
firmware: xilinx: Use explicit values for all enum values
sample/acrn: Introduce a sample of HSM ioctl interface usage
virt: acrn: Introduce an interface for Service VM to control vCPU
...
Introduce an initial driver for CXL 2.0 Type-3 Memory Devices. CXL is
Compute Express Link which released the 2.0 specification in November.
The Linux relevant changes in CXL 2.0 are support for an OS to
dynamically assign address space to memory devices, support for
switches, persistent memory, and hotplug. A Type-3 Memory Device is a
PCI enumerated device presenting the CXL Memory Device Class Code and
implementing the CXL.mem protocol. CXL.mem allows device to advertise
CPU and I/O coherent memory to the system, i.e. typical "System RAM" and
"Persistent Memory" in Linux /proc/iomem terms.
In addition to the CXL.mem fast path there is an administrative command
hardware mailbox interface for maintenance and provisioning. It is this
command interface that is the focus of the initial driver. With this
driver a CXL device that is mapped by the BIOS can be administered by
Linux. Linux support for CXL PMEM and dynamic CXL address space
management are to be implemented post v5.12.
4cdadfd5e0 cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
8adaf747c9 cxl/mem: Find device capabilities
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
b39cb1052a cxl/mem: Register CXL memX devices
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
13237183c7 cxl/mem: Add a "RAW" send command
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
472b1ce6e9 cxl/mem: Enable commands via CEL
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
57ee605b97 cxl/mem: Add set of informational commands
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-----BEGIN PGP SIGNATURE-----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=3SAQ
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull initial support for CXL (Compute Express Link) from Dan Williams:
"Introduce an initial driver for CXL 2.0 Type-3 Memory Devices.
CXL is Compute Express Link which released the 2.0 specification in
November. The Linux relevant changes in CXL 2.0 are support for an OS
to dynamically assign address space to memory devices, support for
switches, persistent memory, and hotplug.
A Type-3 Memory Device is a PCI enumerated device presenting the CXL
Memory Device Class Code and implementing the CXL.mem protocol.
CXL.mem allows device to advertise CPU and I/O coherent memory to the
system, i.e. typical "System RAM" and "Persistent Memory" in Linux
/proc/iomem terms.
In addition to the CXL.mem fast path there is an administrative
command hardware mailbox interface for maintenance and provisioning.
It is this command interface that is the focus of the initial driver.
With this driver a CXL device that is mapped by the BIOS can be
administered by Linux.
Linux support for CXL PMEM and dynamic CXL address space management
are to be implemented post v5.12"
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
4cdadfd5e0 ("cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints")
13237183c7 ("cxl/mem: Add a "RAW" send command")
472b1ce6e9 ("cxl/mem: Enable commands via CEL")
57ee605b97 ("cxl/mem: Add set of informational commands")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
8adaf747c9 ("cxl/mem: Find device capabilities")
b39cb1052a ("cxl/mem: Register CXL memX devices")
* tag 'cxl-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
cxl/mem: Fix potential memory leak
cxl/mem: Return -EFAULT if copy_to_user() fails
MAINTAINERS: Add maintainers of the CXL driver
cxl/mem: Add set of informational commands
cxl/mem: Enable commands via CEL
cxl/mem: Add a "RAW" send command
cxl/mem: Add basic IOCTL interface
cxl/mem: Register CXL memX devices
cxl/mem: Find device capabilities
cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints
- As promised, the minimum Sphinx version to build the docs is now 1.7,
and we have dropped support for Python 2 entirely. That allowed the
removal of a bunch of compatibility code.
- A set of treewide warning fixups from Mauro that I applied after it
became clear nobody else was going to deal with them.
- The automarkup mechanism can now create cross-references from relative
paths to RST files.
- More translations, typo fixes, and warning fixes.
No conflicts with any other tree as far as I know.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmAq4EUPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YTIAH/1I5MlVQwuvNKjwCAEdmltQgHv6SmXSpDkrp
SGuviWVXxqz8dTyo7C2R12qE/7nP8zGAmclNdX78ynl5qWaj05lQsjBgMYSoQO/F
+akyLQSL8/8SQrtDPPBcboPuIz9DzkX51kkQthvCf0puJi0ScKVHO9Sk9SKUgDoK
cnCE9VwpGL7YX/ee2wt91UYREijgJ9P7eQ6rqKvUZ5Itu9ikfu9vQU41GR9tOXDK
MQK+k38pWdl8wRgTgA0pkVhMf1G732bxTTicvFHXcyqmCkh7++m2+ysT8O+SBBMX
e5BbP0yysSqThjwFHOW5PWM1AWD5iVz+pnwJwEaJ4K76tJJOw9M=
=bcDk
-----END PGP SIGNATURE-----
Merge tag 'docs-5.12' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a relatively quiet cycle in docsland.
- As promised, the minimum Sphinx version to build the docs is now
1.7, and we have dropped support for Python 2 entirely. That
allowed the removal of a bunch of compatibility code.
- A set of treewide warning fixups from Mauro that I applied after it
became clear nobody else was going to deal with them.
- The automarkup mechanism can now create cross-references from
relative paths to RST files.
- More translations, typo fixes, and warning fixes"
* tag 'docs-5.12' of git://git.lwn.net/linux: (75 commits)
docs: kernel-hacking: be more civil
docs: Remove the Microsoft rhetoric
Documentation/admin-guide: kernel-parameters: Update nohlt section
doc/admin-guide: fix spelling mistake: "perfomance" -> "performance"
docs: Document cross-referencing using relative path
docs: Enable usage of relative paths to docs on automarkup
docs: thermal: fix spelling mistakes
Documentation: admin-guide: Update kvm/xen config option
docs: Make syscalls' helpers naming consistent
coding-style.rst: Avoid comma statements
Documentation: /proc/loadavg: add 3 more field descriptions
Documentation/submitting-patches: Add blurb about backtraces in commit messages
Docs: drop Python 2 support
Move our minimum Sphinx version to 1.7
Documentation: input: define ABS_PRESSURE/ABS_MT_PRESSURE resolution as grams
scripts/kernel-doc: add internal hyperlink to DOC: sections
Update Documentation/admin-guide/sysctl/fs.rst
docs: Update DTB format references
docs: zh_CN: add iio index.rst translation
docs/zh_CN: add iio ep93xx_adc.rst translation
...
- new driver for the Toshiba Visconti platform
- rework of interrupt handling in gpio-tegra
- updates for GPIO selftests: we're now using the character device to perform
the subsystem checks
- support for a new rcar variant + some code refactoring
- refactoring of gpio-ep93xx
- SPDX License identifier has been updated in the uapi header so that userspace
programs bundling it can become fully REUSE-compliant
- improvements to pwm handling in gpio-mvebu
- support for interrupt handling and power management for gpio-xilinx as well
as some code refactoring
- support for a new chip variant in gpio-pca953x
- removal of drivers: zte xs & intel-mid and removal of leftovers from
intel-msic
- impovements to intel drivers pulled from Andy Shevchenko
- improvements to the gpio-aggregator virtual GPIO driver
- and several minor tweaks and fixes to code and documentation all over the
place
-----BEGIN PGP SIGNATURE-----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=OZtR
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"It's been a relatively calm release cycle and we're actually removing
more code than we're adding.
Summary:
- new driver for the Toshiba Visconti platform
- rework of interrupt handling in gpio-tegra
- updates for GPIO selftests: we're now using the character device to
perform the subsystem checks
- support for a new rcar variant + some code refactoring
- refactoring of gpio-ep93xx
- SPDX License identifier has been updated in the uapi header so that
userspace programs bundling it can become fully REUSE-compliant
- improvements to pwm handling in gpio-mvebu
- support for interrupt handling and power management for gpio-xilinx
as well as some code refactoring
- support for a new chip variant in gpio-pca953x
- removal of drivers: zte xs & intel-mid and removal of leftovers
from intel-msic
- impovements to intel drivers pulled from Andy Shevchenko
- improvements to the gpio-aggregator virtual GPIO driver
- and several minor tweaks and fixes to code and documentation all
over the place"
* tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (71 commits)
gpio: pcf857x: Fix missing first interrupt
gpio: ep93xx: refactor base IRQ number
gpio: ep93xx: refactor ep93xx_gpio_add_bank
gpio: ep93xx: Fix typo s/hierarchial/hierarchical
gpio: ep93xx: drop to_irq binding
gpio: ep93xx: Fix wrong irq numbers in port F
gpio: uapi: use the preferred SPDX license identifier
gpio: gpio-xilinx: Add check if width exceeds 32
gpio: gpio-xilinx: Add support for suspend and resume
gpio: gpio-xilinx: Add interrupt support
gpio: gpio-xilinx: Reduce spinlock array to array
gpio: gpio-xilinx: Simplify with dev_err_probe()
gpio: msic: Drop driver from Makefile
gpio: wcove: Split out to_ireg() helper and deduplicate the code
gpio: wcove: Switch to use regmap_set_bits(), regmap_clear_bits()
gpio: wcove: Get rid of error prone casting in IRQ handler
gpio: intel-mid: Remove driver for deprecated platform
gpio: msic: Remove driver for deprecated platform
gpio: aggregator: Remove trailing comma in terminator entries
gpio: aggregator: Use compound literal from the header
...
thermal driver (Daniel Lezcano)
- Remove the notify ops as it is no longer used (Daniel Lezcano)
- Remove the 'forced passive' option and the unused bind/unbind
functions (Daniel Lezcano)
- Remove the THERMAL_TRIPS_NONE and the code cleanup around this
macro (Daniel Lezcano)
- Rework the delays to make them pre-computed instead of computing
them again and again at each polling interval (Daniel Lezcano)
- Remove the pointless 'thermal_zone_device_reset' function (Daniel
Lezcano)
- Use the critical and hot ops to prevent an unexpected system
shutdown on int340x (Kai-Heng Feng)
- Make the cooling device state private to the thermal subsystem
(Daniel Lezcano)
- Prevent to use not-power-aware actor devices with the power
allocator governor (Lukasz Luba)
- Remove 'zx' and 'tango' support along with the corresponding
platforms (Arnd Bergman)
- Fix several issues on the Omap thermal driver (Tony Lindgren)
- Add support for adc-tm5 PMIC thermal monitor for Qcom
platforms. Please note those changes rely on an immutable branch:
iio-thermal-5.11-rc1/ib-iio-thermal-5.11-rc1 from the iio tree
(Dmitry Baryshkov)
- Fix an initialization loop in the adc-tm5 (Colin Ian King)
- Fix a return error check in the cpufreq cooling device (Viresh Kumar)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmAvkKMACgkQqDIjiipP
6E9yFggAmXy8t2j1mRvn/KLU+teTGIoSFkZ8mBnY2Sgip97IRZRhCwAZbUKOW0eI
bvpAzBjacxdZHT7OxxvGzCOq/zlAh4UoStI8bMpzdUWPdkAj4ippArLYGvagLym8
WEQysWnrr8V1RCZbQuBNjyLwjf0fcXkzIBU1mbZXA8T8Y6Yn646TdtsrVT4Idg1j
MOg7PAHBcTSY/wOReZKJ5TB1yvo2tNOuGOqUVbrIAHlRkiNTVHirVUq6aZGtTTKp
7ukcu8EI/o7XKBdQ5d9MZaHdwkcyAIJj4jdjmjkUJpa8VYQFPjayNyN3I+Py9lH2
jtWVYHQxZbY166IZP2yeXFjPzd6elw==
=Jmz4
-----END PGP SIGNATURE-----
Merge tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Use the newly introduced 'hot' and 'critical' ops for the acpi
thermal driver (Daniel Lezcano)
- Remove the notify ops as it is no longer used (Daniel Lezcano)
- Remove the 'forced passive' option and the unused bind/unbind
functions (Daniel Lezcano)
- Remove the THERMAL_TRIPS_NONE and the code cleanup around this macro
(Daniel Lezcano)
- Rework the delays to make them pre-computed instead of computing them
again and again at each polling interval (Daniel Lezcano)
- Remove the pointless 'thermal_zone_device_reset' function (Daniel
Lezcano)
- Use the critical and hot ops to prevent an unexpected system shutdown
on int340x (Kai-Heng Feng)
- Make the cooling device state private to the thermal subsystem
(Daniel Lezcano)
- Prevent to use not-power-aware actor devices with the power allocator
governor (Lukasz Luba)
- Remove 'zx' and 'tango' support along with the corresponding
platforms (Arnd Bergman)
- Fix several issues on the Omap thermal driver (Tony Lindgren)
- Add support for adc-tm5 PMIC thermal monitor for Qcom platforms
(Dmitry Baryshkov)
- Fix an initialization loop in the adc-tm5 (Colin Ian King)
- Fix a return error check in the cpufreq cooling device (Viresh Kumar)
* tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits)
thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error
thermal: qcom: Fix comparison with uninitialized variable channels_available
thermal: qcom: add support for adc-tm5 PMIC thermal monitor
dt-bindings: thermal: qcom: add adc-thermal monitor bindings
thermal: ti-soc-thermal: Use non-inverted define for omap4
thermal: ti-soc-thermal: Simplify polling with iopoll
thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
thermal: ti-soc-thermal: Skip pointless register access for dra7
thermal/drivers/zx: Remove zx driver
thermal/drivers/tango: Remove tango driver
thermal: power allocator: fail binding for non-power actor devices
thermal/core: Make cooling device state change private
thermal: intel: pch: Fix unexpected shutdown at critical temperature
thermal: int340x: Fix unexpected shutdown at critical temperature
thermal/core: Remove pointless thermal_zone_device_reset() function
thermal/core: Remove ms based delay fields
thermal/core: Use precomputed jiffies for the polling
thermal/core: Precompute the delays from msecs to jiffies
thermal/core: Remove unused macro THERMAL_TRIPS_NONE
thermal/core: Remove THERMAL_TRIPS_NONE test
...
- Microsoft Surface devices System Aggregator Module support
- SW_TABLET_MODE reporting improvements
- thinkpad_acpi keyboard language setting support
- platform / DPTF profile settings support
- Base / userspace API parts merged from Rafael's acpi-platform branch
- thinkpad_acpi and ideapad-laptop support through pdx86
- Remove support for some obsolete Intel MID platforms through merging
of the shared intel-mid-removal branch
- Big cleanup of the ideapad-laptop driver
- Misc. other fixes / new hw support / quirks
The following is an automated git shortlog grouped by driver:
ACPI:
- platform-profile: Fix possible deadlock in platform_profile_remove()
- platform-profile: Introduce object pointers to callbacks
- platform-profile: Drop const qualifier for cur_profile
- platform: Add platform profile support
Documentation:
- Add documentation for new platform_profile sysfs attribute
Documentation/ABI:
- sysfs-platform-ideapad-laptop: conservation_mode attribute
- sysfs-platform-ideapad-laptop: update device attribute paths
Kconfig:
- add missing selects for ideapad-laptop
MAINTAINERS:
- update email address for Henrique de Moraes Holschuh
Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans:
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans
Merge remote-tracking branch 'linux-pm/acpi-platform' into review-hans:
- Merge remote-tracking branch 'linux-pm/acpi-platform' into review-hans
Merge tag 'ib-drm-gpio-pdx86-rtc-wdt-v5.12-1' into for-next:
- Merge tag 'ib-drm-gpio-pdx86-rtc-wdt-v5.12-1' into for-next
Move all dell drivers to their own subdirectory:
- Move all dell drivers to their own subdirectory
Platform:
- OLPC: Constify static struct regulator_ops
- OLPC: Specify the enable time
- OLPC: Remove dcon_rdev from olpc_ec_priv
- OLPC: Fix probe error handling
Revert "platform/x86:
- ideapad-laptop: Switch touchpad attribute to be RO"
acer-wmi:
- Don't use ACPI_EXCEPTION()
amd-pmc:
- put device on error paths
- Fix CONFIG_DEBUG_FS check
dell-wmi-sysman:
- fix a NULL pointer dereference
docs:
- driver-api: Add Surface Aggregator subsystem documentation
drm/gma500:
- Get rid of duplicate NULL checks
- Convert to use new SCU IPC API
gpio:
- msic: Remove driver for deprecated platform
- intel-mid: Remove driver for deprecated platform
hp-wmi:
- Disable tablet-mode reporting by default
- Don't log a warning on HPWMI_RET_UNKNOWN_COMMAND errors
i2c-multi-instantiate:
- Don't create platform device for INT3515 ACPI nodes
ideapad-laptop:
- add "always on USB charging" control support
- add keyboard backlight control support
- send notification about touchpad state change to sysfs
- fix checkpatch warnings, more consistent style
- change 'cfg' debugfs file format
- change 'status' debugfs file format
- check for touchpad support in _CFG
- check for Fn-lock support in HALS
- rework is_visible() logic
- rework and create new ACPI helpers
- group and separate (un)related constants into enums
- misc. device attribute changes
- always propagate error codes from device attributes' show() callback
- convert ACPI helpers to return -EIO in case of failure
- use dev_{err,warn} or appropriate variant to display log messages
- use msecs_to_jiffies() helper instead of hand-crafted formula
- use for_each_set_bit() helper to simplify event processing
- use kobj_to_dev()
- use device_{add,remove}_group
- use sysfs_emit()
- add missing call to submodule destructor
- sort includes lexicographically
- use appropriately typed variable to store the return value of ACPI methods
- remove unnecessary NULL checks
- remove unnecessary dev_set_drvdata() call
- DYTC Platform profile support
- Disable touchpad_switch for ELAN0634
intel-vbtn:
- Eval VBDL after registering our notifier
- Add alternative method to enable switches
- Create 2 separate input-devs for buttons and switches
- Rework wakeup handling in notify_handler()
- Drop HP Stream x360 Convertible PC 11 from allow-list
- Support for tablet mode on Dell Inspiron 7352
intel_mid_powerbtn:
- Remove driver for deprecated platform
- Remove driver for deprecated platform
intel_mid_thermal:
- Remove driver for deprecated platform
- Remove driver for deprecated platform
intel_pmt:
- Make INTEL_PMT_CLASS non-user-selectable
intel_pmt_crashlog:
- Add dependency on MFD_INTEL_PMT
intel_pmt_telemetry:
- Add dependency on MFD_INTEL_PMT
intel_scu_ipc:
- Increase virtual timeout from 3 to 5 seconds
intel_scu_wdt:
- Drop mistakenly added const
- Get rid of custom x86 model comparison
- Drop SCU notification
- Move driver from arch/x86
msi-wmi:
- Fix variable 'status' set but not used compiler warning
platform/surface:
- aggregator: Fix access of unaligned value
- Add Surface Hot-Plug driver
- surface3-wmi: Fix variable 'status' set but not used compiler warning
- aggregator: Fix braces in if condition with unlikely() macro
- aggregator: Fix kernel-doc references
- aggregator: fix a kernel-doc markup
- aggregator_cdev: Add comments regarding unchecked allocation size
- aggregator_cdev: Fix access of uninitialized variables
- fix potential integer overflow on shift of a int
- Add Surface ACPI Notify driver
- Add Surface Aggregator user-space interface
- aggregator: Add dedicated bus and device type
- aggregator: Add error injection capabilities
- aggregator: Add trace points
- aggregator: Add event item allocation caching
- aggregator: Add control packet allocation caching
- Add Surface Aggregator subsystem
- SURFACE_PLATFORMS should depend on ACPI
- surface_gpe: Fix non-PM_SLEEP build warnings
platform/x86/intel-uncore-freq:
- Add Sapphire Rapids server support
rtc:
- mrst: Remove driver for deprecated platform
sony-laptop:
- Remove unneeded semicolon
thinkpad_acpi:
- Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on
- Fix 'warning: no previous prototype for' warnings
- Add platform profile support
- fixed warning and incorporated review comments
- rectify length of title underline
- Don't register keyboard_lang unnecessarily
- set keyboard language
- Add P53/73 firmware to fan_quirk_table for dual fan control
- correct palmsensor error checking
tools/power/x86/intel-speed-select:
- Update version to 1.8
- Add new command to get/set TRL
- Add new command turbo-mode
- Set higher of cpuinfo_max_freq or base_frequency
- Set scaling_max_freq to base_frequency
touchscreen_dmi:
- Add info for the Jumper EZpad 7 tablet
- Add swap-x-y quirk for Goodix touchscreen on Estar Beauty HD tablet
watchdog:
- intel-mid_wdt: Postpone IRQ handler registration till SCU is ready
- intel_scu_watchdog: Remove driver for deprecated platform
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmAqZ5cUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zmuwf/XLoZzs6oW7Ps9DhkyU5lk7D79rti
DY4AabVnWZhJ+Yl5+qMCTjC0R0nJYoq9PCDU5q20HHSFq7PXV0fPEVo7ZOp8tPng
wdzb2glbtGjSWksjj3c8eB/jjPP0tpsWptH+9jlTv9yXwQNVh/rPVltmD+z8y69U
qNzySltQMtoKmQKNbktUeHA12jBldnH+QlkL8KUp5ZEVDd7gukkmAovpzEcnwk5U
lrza7I52c9Ggu1pD2OCX7an9tk6N7mQ6Rk2/c6GzRsOYa6SC5Aj7fi2bs0LRdGGx
Kz/gtKS3dRIreEs4LGmL8byVi7a/YvCQoTfO+MxKq/btedBwxO2edDDsRg==
=B+Fz
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- Microsoft Surface devices System Aggregator Module support
- SW_TABLET_MODE reporting improvements
- thinkpad_acpi keyboard language setting support
- platform / DPTF profile settings support:
- Base / userspace API parts merged from Rafael's acpi-platform
branch
- thinkpad_acpi and ideapad-laptop support through pdx86
- Remove support for some obsolete Intel MID platforms through
merging of the shared intel-mid-removal branch
- Big cleanup of the ideapad-laptop driver
- Misc other fixes / new hw support / quirks"
* tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (99 commits)
platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds
platform/surface: aggregator: Fix access of unaligned value
tools/power/x86/intel-speed-select: Update version to 1.8
tools/power/x86/intel-speed-select: Add new command to get/set TRL
tools/power/x86/intel-speed-select: Add new command turbo-mode
Platform: OLPC: Constify static struct regulator_ops
platform/surface: Add Surface Hot-Plug driver
platform/x86: intel_scu_wdt: Drop mistakenly added const
platform/x86: Kconfig: add missing selects for ideapad-laptop
platform/x86: acer-wmi: Don't use ACPI_EXCEPTION()
platform/x86: thinkpad_acpi: Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on
platform/x86: thinkpad_acpi: Fix 'warning: no previous prototype for' warnings
platform/x86: msi-wmi: Fix variable 'status' set but not used compiler warning
platform/surface: surface3-wmi: Fix variable 'status' set but not used compiler warning
platform/x86: Move all dell drivers to their own subdirectory
Documentation/ABI: sysfs-platform-ideapad-laptop: conservation_mode attribute
Documentation/ABI: sysfs-platform-ideapad-laptop: update device attribute paths
platform/x86: ideapad-laptop: add "always on USB charging" control support
platform/x86: ideapad-laptop: add keyboard backlight control support
platform/x86: ideapad-laptop: send notification about touchpad state change to sysfs
...
-----BEGIN PGP SIGNATURE-----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=/wKL
-----END PGP SIGNATURE-----
Merge tag 'media/v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- some core fixes in VB2 mem2mem support
- some improvements and cleanups in V4L2 async kAPI
- newer controls in V4L2 API for H-264 and HEVC codecs
- allegro-dvt driver was promoted from staging
- new i2c sendor drivers: imx334, ov5648, ov8865
- new automobile camera module: rdacm21
- ipu3 cio2 driver started gained support for some ACPI BIOSes
- new ATSC frontend: MaxLinear mxl692 VSB tuner/demod
- the SMIA/CCS driver gained more support for CSS standard
- several driver fixes, updates and improvements
* tag 'media/v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (362 commits)
media: v4l: async: Fix kerneldoc documentation for async functions
media: i2c: max9271: Add MODULE_* macros
media: i2c: Kconfig: Make MAX9271 a module
media: imx334: 'ret' is uninitialized, should have been PTR_ERR()
media: i2c: Add imx334 camera sensor driver
media: dt-bindings: media: Add bindings for imx334
media: ov8856: Configure sensor for GRBG Bayer for all modes
media: i2c: imx219: Implement V4L2_CID_LINK_FREQ control
media: ov5675: fix vflip/hflip control
media: ipu3-cio2: Build bridge only if ACPI is enabled
media: Remove the legacy v4l2-clk API
media: ov6650: Use the generic clock framework
media: mt9m111: Use the generic clock framework
media: ov9640: Use the generic clock framework
media: pxa_camera: Drop the v4l2-clk clock register
media: mach-pxa: Register the camera sensor fixed-rate clock
media: i2c: imx258: get clock from device properties and enable it via runtime PM
media: i2c: imx258: simplify getting state container
media: i2c: imx258: add support for binding via device tree
media: dt-bindings: media: imx258: add bindings for IMX258 sensor
...
Add a straightforward IOCTL that provides a mechanism for userspace to
query the supported memory device commands. CXL commands as they appear
to userspace are described as part of the UAPI kerneldoc. The command
list returned via this IOCTL will contain the full set of commands that
the driver supports, however, some of those commands may not be
available for use by userspace.
Memory device commands first appear in the CXL 2.0 specification. They
are submitted through a mailbox mechanism specified in the CXL 2.0
specification.
The send command allows userspace to issue mailbox commands directly to
the hardware. The list of available commands to send are the output of
the query command. The driver verifies basic properties of the command
and possibly inspect the input (or output) payload to determine whether
or not the command is allowed (or might taint the kernel).
Reported-by: kernel test robot <lkp@intel.com> # bug in earlier revision
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2)
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20210217040958.1354670-5-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Create the /sys/bus/cxl hierarchy to enumerate:
* Memory Devices (per-endpoint control devices)
* Memory Address Space Devices (platform address ranges with
interleaving, performance, and persistence attributes)
* Memory Regions (active provisioned memory from an address space device
that is in use as System RAM or delegated to libnvdimm as Persistent
Memory regions).
For now, only the per-endpoint control devices are registered on the
'cxl' bus. However, going forward it will provide a mechanism to
coordinate cross-device interleave.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> (v2)
Link: https://lore.kernel.org/r/20210217040958.1354670-4-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Provide enough functionality to utilize the mailbox of a memory device.
The mailbox is used to interact with the firmware running on the memory
device. The flow is proven with one implemented command, "identify".
Because the class code has already told the driver this is a memory
device and the identify command is mandatory.
CXL devices contain an array of capabilities that describe the
interactions software can have with the device or firmware running on
the device. A CXL compliant device must implement the device status and
the mailbox capability. Additionally, a CXL compliant memory device must
implement the memory device capability. Each of the capabilities can
[will] provide an offset within the MMIO region for interacting with the
CXL device.
The capabilities tell the driver how to find and map the register space
for CXL Memory Devices. The registers are required to utilize the CXL
spec defined mailbox interface. The spec outlines two mailboxes, primary
and secondary. The secondary mailbox is earmarked for system firmware,
and not handled in this driver.
Primary mailboxes are capable of generating an interrupt when submitting
a background command. That implementation is saved for a later time.
Reported-by: Colin Ian King <colin.king@canonical.com> (coverity)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> (smatch)
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2)
Link: https://www.computeexpresslink.org/download-the-specification
Link: https://lore.kernel.org/r/20210217040958.1354670-3-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The CXL.mem protocol allows a device to act as a provider of "System
RAM" and/or "Persistent Memory" that is fully coherent as if the memory
was attached to the typical CPU memory controller.
With the CXL-2.0 specification a PCI endpoint can implement a "Type-3"
device interface and give the operating system control over "Host
Managed Device Memory". See section 2.3 Type 3 CXL Device.
The memory range exported by the device may optionally be described by
the platform firmware memory map, or by infrastructure like LIBNVDIMM to
provision persistent memory capacity from one, or more, CXL.mem devices.
A pre-requisite for Linux-managed memory-capacity provisioning is this
cxl_mem driver that can speak the mailbox protocol defined in section
8.2.8.4 Mailbox Registers.
For now just land the initial driver boiler-plate and Documentation/
infrastructure.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: David Rientjes <rientjes@google.com> (v1)
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://www.computeexpresslink.org/download-the-specification
Link: https://lore.kernel.org/r/20210217040958.1354670-2-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Currently the HTML output for Documentation/driver-api/gpio/intro.rst
doesn't look right. The lines that start with LOW or HIGH are formatted
in bold, while the next line after each is not bold.
With this patch, the HTML looks better.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The gpiod_*_array_* functions take four arguments, not three.
Additionally, the formatting of the "value_bitmap" line results in
misformatted HTML, so fix that.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The V4L2 temporary clock helper API, was introduced
in late 2012 and, as mentioned in the documentation,
meant to be replaced by the generic clock API,
once the generic clock framework became available
on all relevant architectures.
The generic clock API is a well-established API (since a few
years now). The last few media capture drivers and sensors
using v4l2-clk have been converted to the generic clock framework.
We can now remove the v4l2-clk API.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Petr Cvek <petrcvekcz@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Now that most users of v4l2_async_notifier_add_subdev have been converted,
let's fix the documentation so it's more clear how the v4l2-async API
should be used.
Document functions that drivers should use, and their purpose.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Driver is gone, so is the documentation. Remove a leftover in documentation.
Fixes: 8ba59e9dee ("misc: pti: Remove driver for deprecated platform")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210129112729.65363-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current link died, according to Wayback Machine, back in 2017. And the
website is completely down since 2019. Moreover, there was a custom
cover on that PDF, i.e. it was modified.
According to HDMI licence agreement (LA), HDMI specification and technical
information are supposed to be hosted on www.hdmi.org exclusively, and not
redistributed by third-parties.
Sure, there are still many more or less reliable "mirrors" out there with
a direct download straight from a search engine's page. However, for
example, from FPGA4fun[1] website it was removed "per HDMI LA request".
Unfortunately, the official download page is protected by email CAPTCHA,
but that seems to be the only legit way to obtain a copy.
[1] https://www.fpga4fun.com/HDMI.html
Signed-off-by: ivan tkachenko <me@ratijas.tk>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc1 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210122114358.39299-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A reference to the sub-device pad ops was not follwed by a whitespace,
resulting in a warning during documentation build. Fix it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 25c8d9a768 ("media: Documentation: v4l: Document that link_validate op is valid for sink only")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The code was reorganized in 2012 with the commit 0c01ebbfd3.
The main change is a loop on the trip points array and a unconditional
call to the throttle() ops of the governors for each of them even if
the trip temperature is not reached yet.
With this change, the 'forced_passive' is no longer checked in the
thermal_zone_device_update() function but in the step wise governor's
throttle() callback.
As the force_passive does no belong to the trip point array, the
thermal_zone_device_update() can not compare with the specified
passive temperature, thus does not detect the passive limit has been
crossed. Consequently, throttle() is never called and the
'forced_passive' branch is unreached.
In addition, the default processor cooling device is not automatically
bound to the thermal zone if there is not passive trip point, thus the
'forced_passive' can not operate.
If there is an active trip point, then the throttle function will be
called to mitigate at this temperature and the 'forced_passive' will
override the mitigation of the active trip point in this case but with
the default cooling device bound to the thermal zone, so usually a
fan, and that is not a passive cooling effect.
Given the regression exists since more than 8 years, nobody complained
and at the best of my knowledge there is no bug open in
https://bugzilla.kernel.org, it is reasonable to say it is unused.
Remove the 'forced_passive' related code.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Link: https://lore.kernel.org/r/20201214233811.485669-1-daniel.lezcano@linaro.org
Include existing CCS PLL calculator kerneldoc documentation to the
documentation build.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Document pratices of handling clocks in camera sensor drivers on both DT
and ACPI.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Update the formula to calculate the pixel rate on the link for C-PHY.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The link_validate pad op will only be called on sink pads. Document this.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
We no longer have format related callbacks in video ops. Remove the
reference to them.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hannes reported a problem with setting up dma transfers on a mcb device.
The problem boiled down to the use of a wrong 'device' for the dma
functions.
Document how to setup dma transfers for a IP core on a mcb carrier.
Reported-by: Hannes Duerr <Hannes.Duerr@duagon.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/3bdc8f76b30c2b0e2a2bfab06c2e73797ddc9384.1608305690.git.johannes.thumshirn@wdc.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Replace the lkml.org links with lore to better use a single source
that's more likely to stay available long-term.
Done by bash script:
cvt_lkml_to_lore ()
{
tmpfile=$(mktemp ./.cvt_links.XXXXXXX)
header=$(echo $1 | sed 's@/lkml/@/lkml/headers/@')
wget -qO - $header > $tmpfile
if [[ $? == 0 ]] ; then
link=$(grep -i '^Message-Id:' $tmpfile | head -1 | \
sed -r -e 's/^\s*Message-Id:\s*<\s*//' -e 's/\s*>\s*$//' -e 's@^@https://lore.kernel.org/r/@')
# echo "testlink: $link"
if [ -n "$link" ] ; then
wget -qO - $link > /dev/null
if [[ $? == 0 ]] ; then
echo $link
fi
fi
fi
rm -f $tmpfile
}
git grep -P -o "\bhttps?://(?:www.)?lkml.org/lkml[\/\w]+" $@ |
while read line ; do
echo $line
file=$(echo $line | cut -f1 -d':')
link=$(echo $line | cut -f2- -d':')
newlink=$(cvt_lkml_to_lore $link)
if [[ -n "$newlink" ]] ; then
sed -i -e "s#\b$link\b#$newlink#" $file
fi
done
Link: https://lore.kernel.org/patchwork/patch/1265849/#1462688
Signed-off-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/77cdb7f32cfb087955bfc3600b86c40bed5d4104.camel@perches.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The Surface ACPI Notify (SAN) device provides an ACPI interface to the
Surface Aggregator EC, specifically the Surface Serial Hub interface.
This interface allows EC requests to be made from ACPI code and can
convert a subset of EC events back to ACPI notifications.
Specifically, this interface provides a GenericSerialBus operation
region ACPI code can execute a request by writing the request command
data and payload to this operation region and reading back the
corresponding response via a write-then-read operation. Furthermore,
this interface provides a _DSM method to be called when certain events
from the EC have been received, essentially turning them into ACPI
notifications.
The driver provided in this commit essentially takes care of translating
the request data written to the operation region, executing the request,
waiting for it to finish, and finally writing and translating back the
response (if the request has one). Furthermore, this driver takes care
of enabling the events handled via ACPI _DSM calls. Lastly, this driver
also exposes an interface providing discrete GPU (dGPU) power-on
notifications on the Surface Book 2, which are also received via the
operation region interface (but not handled by the SAN driver directly),
making them accessible to other drivers (such as a dGPU hot-plug driver
that may be added later on).
On 5th and 6th generation Surface devices (Surface Pro 5/2017, Pro 6,
Book 2, Laptop 1 and 2), the SAN interface provides full battery and
thermal subsystem access, as well as other EC based functionality. On
those models, battery and thermal sensor devices are implemented as
standard ACPI devices of that type, however, forward ACPI calls to the
corresponding Surface Aggregator EC request via the SAN interface and
receive corresponding notifications (e.g. battery information change)
from it. This interface is therefore required to provide said
functionality on those devices.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-10-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a misc-device providing user-space access to the Surface Aggregator
EC, mainly intended for debugging, testing, and reverse-engineering.
This interface gives user-space applications the ability to send
requests to the EC and receive the corresponding responses.
The device-file is managed by a pseudo platform-device and corresponding
driver to avoid dependence on the dedicated bus, allowing it to be
loaded in a minimal configuration.
A python library and scripts to access this device can be found at [1].
[1]: https://github.com/linux-surface/surface-aggregator-module/tree/master/scripts/ssam
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-9-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add documentation for the Surface Aggregator subsystem and its client
drivers, giving an overview of the subsystem, its use-cases, its
internal structure and internal API, as well as its external API for
writing client drivers.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-8-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Subsystem:
- Remove nvram ABI. There was no complaints about the deprecation for the last
3 years.
- Improve RTC device allocation and registration
- Now available for ARCH=um
Drivers:
- at91rm9200: correction and sam9x60 support
- ds1307: improve ACPI support
- mxc: now DT only
- pcf2127: watchdog support now needs the reset-source property
- pcf8523: set range
- rx6110: i2c support
-----BEGIN PGP SIGNATURE-----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=n8V2
-----END PGP SIGNATURE-----
Merge tag 'rtc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- Remove nvram ABI. There was no complaints about the deprecation for
the last 3 years.
- Improve RTC device allocation and registration
- Now available for ARCH=um
Drivers:
- at91rm9200: correction and sam9x60 support
- ds1307: improve ACPI support
- mxc: now DT only
- pcf2127: watchdog support now needs the reset-source property
- pcf8523: set range
- rx6110: i2c support"
* tag 'rtc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (43 commits)
rtc: pcf2127: only use watchdog when explicitly available
dt-bindings: rtc: add reset-source property
rtc: fix RTC removal
rtc: s3c: Remove dead code related to periodic tick handling
rtc: s3c: Disable all enable (RTC, tick) bits in the probe
rtc: ep93xx: Fix NULL pointer dereference in ep93xx_rtc_read_time
rtc: test: remove debug message
rtc: mxc{,_v2}: enable COMPILE_TEST
rtc: enable RTC framework on ARCH=um
rtc: pcf8523: use BIT
rtc: pcf8523: set range
rtc: pcf8523: switch to devm_rtc_allocate_device
rtc: destroy mutex when releasing the device
rtc: shrink devm_rtc_allocate_device()
rtc: rework rtc_register_device() resource management
rtc: nvmem: emit an error message when nvmem registration fails
rtc: add devm_ prefix to rtc_nvmem_register()
rtc: nvmem: remove nvram ABI
Documentation: list RTC devres helpers in devres.rst
rtc: omap: use devm_pinctrl_register()
...
- Only enable char/agp uapi when CONFIG_DRM_LEGACY is set
Cross-subsystem Changes:
- vma_set_file helper to make vma->vm_file changing less brittle,
acked by Andrew
Core Changes:
- dma-buf heaps improvements
- pass full atomic modeset state to driver callbacks
- shmem helpers: cached bo by default
- cleanups for fbdev, fb-helpers
- better docs for drm modes and SCALING_FITLER uapi
- ttm: fix dma32 page pool regression
Driver Changes:
- multi-hop regression fixes for amdgpu, radeon, nouveau
- lots of small amdgpu hw enabling fixes (display, pm, ...)
- fixes for imx, mcde, meson, some panels, virtio, qxl, i915, all
fairly minor
- some cleanups for legacy drm/fbdev drivers
-----BEGIN PGP SIGNATURE-----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=BhU/
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-12-18' of git://anongit.freedesktop.org/drm/drm
Pull more drm updates from Daniel Vetter:
"UAPI Changes:
- Only enable char/agp uapi when CONFIG_DRM_LEGACY is set
Cross-subsystem Changes:
- vma_set_file helper to make vma->vm_file changing less brittle,
acked by Andrew
Core Changes:
- dma-buf heaps improvements
- pass full atomic modeset state to driver callbacks
- shmem helpers: cached bo by default
- cleanups for fbdev, fb-helpers
- better docs for drm modes and SCALING_FITLER uapi
- ttm: fix dma32 page pool regression
Driver Changes:
- multi-hop regression fixes for amdgpu, radeon, nouveau
- lots of small amdgpu hw enabling fixes (display, pm, ...)
- fixes for imx, mcde, meson, some panels, virtio, qxl, i915, all
fairly minor
- some cleanups for legacy drm/fbdev drivers"
* tag 'drm-next-2020-12-18' of git://anongit.freedesktop.org/drm/drm: (117 commits)
drm/qxl: don't allocate a dma_address array
drm/nouveau: fix multihop when move doesn't work.
drm/i915/tgl: Fix REVID macros for TGL to fetch correct stepping
drm/i915: Fix mismatch between misplaced vma check and vma insert
drm/i915/perf: also include Gen11 in OATAILPTR workaround
Revert "drm/i915: re-order if/else ladder for hpd_irq_setup"
drm/amdgpu/disply: fix documentation warnings in display manager
drm/amdgpu: print mmhub client name for dimgrey_cavefish
drm/amdgpu: set mode1 reset as default for dimgrey_cavefish
drm/amd/display: Add get_dig_frontend implementation for DCEx
drm/radeon: remove h from printk format specifier
drm/amdgpu: remove h from printk format specifier
drm/amdgpu: Fix spelling mistake "Heterogenous" -> "Heterogeneous"
drm/amdgpu: fix regression in vbios reservation handling on headless
drm/amdgpu/SRIOV: Extend VF reset request wait period
drm/amdkfd: correct amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu log.
drm/amd/display: Adding prototype for dccg21_update_dpp_dto()
drm/amdgpu: print what method we are using for runtime pm
drm/amdgpu: simplify logic in atpx resume handling
drm/amdgpu: no need to call pci_ignore_hotplug for _PR3
...
Core changes:
- Retired the old set-up function for GPIO IRQ chips. All chips
now use the template struct gpio_irq_chip and pass that to the core
to be set up alongside the gpio_chip. We can finally get rid of
the old cruft.
- Some refactoring and clean up of the core code.
- Support edge event timestamps to be stamped using REALTIME
(wall clock) timestamps. We have found solid use cases for
this, so we support it.
New drivers:
- MStar MSC313 GPIO driver.
- HiSilicon GPIO driver.
Driver improvements:
- The PCA953x driver now also supports the NXP PCAL9554B/C chips.
- The mockup driver can now be probed from the device tree which
is pretty useful for virtual prototyping of devices.
- The Rcar driver now supports .get_multiple()
- The MXC driver dropped some legacy and became a pure device
tree client.
- The Exar driver was moved over to the IDA interface for
enumerating, and also switched over to using regmap for
register access.
-----BEGIN PGP SIGNATURE-----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=nrFU
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of the GPIO changes for the v5.11 kernel cycle:
Core changes:
- Retired the old set-up function for GPIO IRQ chips. All chips now
use the template struct gpio_irq_chip and pass that to the core to
be set up alongside the gpio_chip. We can finally get rid of the
old cruft.
- Some refactoring and clean up of the core code.
- Support edge event timestamps to be stamped using REALTIME (wall
clock) timestamps. We have found solid use cases for this, so we
support it.
New drivers:
- MStar MSC313 GPIO driver.
- HiSilicon GPIO driver.
Driver improvements:
- The PCA953x driver now also supports the NXP PCAL9554B/C chips.
- The mockup driver can now be probed from the device tree which is
pretty useful for virtual prototyping of devices.
- The Rcar driver now supports .get_multiple()
- The MXC driver dropped some legacy and became a pure device tree
client.
- The Exar driver was moved over to the IDA interface for
enumerating, and also switched over to using regmap for register
access"
* tag 'gpio-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
MAINTAINERS: Remove reference to non-existing file
gpio: hisi: Do not require ACPI for COMPILE_TEST
MAINTAINERS: Add maintainer for HiSilicon GPIO driver
gpio: gpio-hisi: Add HiSilicon GPIO support
gpio: cs5535: Simplify the return expression of cs5535_gpio_probe()
gpiolib: irq hooks: fix recursion in gpiochip_irq_unmask
dt-bindings: mt7621-gpio: convert bindings to YAML format
gpiolib: cdev: Flag invalid GPIOs as used
gpio: put virtual gpio device into their own submenu
drivers: gpio: amd8111: use SPDX-License-Identifier
drivers: gpio: amd8111: prefer dev_err()/dev_info() over raw printk
drivers: gpio: bt8xx: prefer dev_err()/dev_warn() over of raw printk
gpio: Add TODO item for debugfs interface
gpio: just plain warning when nonexisting gpio requested
tools: gpio: add option to report wall-clock time to gpio-event-mon
tools: gpio: add support for reporting realtime event clock to lsgpio
gpiolib: cdev: allow edge event timestamps to be configured as REALTIME
gpio: msc313: MStar MSC313 GPIO driver
dt-bindings: gpio: Binding for MStar MSC313 GPIO controller
dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
...
Current release - always broken:
- net/smc: fix access to parent of an ib device
- devlink: use _BITUL() macro instead of BIT() in the UAPI header
- handful of mptcp fixes
Previous release - regressions:
- intel: AF_XDP: clear the status bits for the next_to_use descriptor
- dpaa2-eth: fix the size of the mapped SGT buffer
Previous release - always broken:
- mptcp: fix security context on server socket
- ethtool: fix string set id check
- ethtool: fix error paths in ethnl_set_channels()
- lan743x: fix rx_napi_poll/interrupt ping-pong
- qca: ar9331: fix sleeping function called from invalid context bug
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=nTjM
-----END PGP SIGNATURE-----
Merge tag 'net-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Current release - always broken:
- net/smc: fix access to parent of an ib device
- devlink: use _BITUL() macro instead of BIT() in the UAPI header
- handful of mptcp fixes
Previous release - regressions:
- intel: AF_XDP: clear the status bits for the next_to_use descriptor
- dpaa2-eth: fix the size of the mapped SGT buffer
Previous release - always broken:
- mptcp: fix security context on server socket
- ethtool: fix string set id check
- ethtool: fix error paths in ethnl_set_channels()
- lan743x: fix rx_napi_poll/interrupt ping-pong
- qca: ar9331: fix sleeping function called from invalid context bug"
* tag 'net-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (32 commits)
net/sched: sch_taprio: reset child qdiscs before freeing them
nfp: move indirect block cleanup to flower app stop callback
octeontx2-af: Fix undetected unmap PF error check
net: nixge: fix spelling mistake in Kconfig: "Instuments" -> "Instruments"
qlcnic: Fix error code in probe
mptcp: fix pending data accounting
mptcp: push pending frames when subflow has free space
mptcp: properly annotate nested lock
mptcp: fix security context on server socket
net/mlx5: Fix compilation warning for 32-bit platform
mptcp: clear use_ack and use_map when dropping other suboptions
devlink: use _BITUL() macro instead of BIT() in the UAPI header
net: korina: fix return value
net/smc: fix access to parent of an ib device
ethtool: fix error paths in ethnl_set_channels()
nfc: s3fwrn5: Remove unused NCI prop commands
nfc: s3fwrn5: Remove the delay for NFC sleep
phy: fix kdoc warning
tipc: do sanity check payload of a netlink message
use __netdev_notify_peers in hyperv
...
New drivers/devices
- Qualcomm ADM driver
- Qualcomm GPI driver
- Allwinner A100 DMA support
- Microchip Sama7g5 support
- Mediatek MT8516 apdma
- Updates:
- more updates to idxd driver and support for IAX config
- runtime PM support for dw driver
- TI keystone drivers for 5.11 included here due to dependency for TI
drivers
-----BEGIN PGP SIGNATURE-----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=uNBn
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"The last dmaengine updates for this year :)
This contains couple of new drivers, new device support and updates to
bunch of drivers.
New drivers/devices:
- Qualcomm ADM driver
- Qualcomm GPI driver
- Allwinner A100 DMA support
- Microchip Sama7g5 support
- Mediatek MT8516 apdma
Updates:
- more updates to idxd driver and support for IAX config
- runtime PM support for dw driver
- TI drivers"
* tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (75 commits)
soc: ti: k3-ringacc: Use correct error casting in k3_ringacc_dmarings_init
dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA
dmaengine: ti: k3-udma: Initial support for K3 PKTDMA
dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling
dmaengine: ti: k3-udma: Initial support for K3 BCDMA
soc: ti: k3-ringacc: add AM64 DMA rings support.
dmaengine: ti: Add support for k3 event routers
dmaengine: ti: k3-psil: Add initial map for AM64
dmaengine: ti: k3-psil: Extend psil_endpoint_config for K3 PKTDMA
dt-bindings: dma: ti: Add document for K3 PKTDMA
dt-bindings: dma: ti: Add document for K3 BCDMA
dmaengine: dmatest: Use dmaengine_get_dma_device
dmaengine: doc: client: Update for dmaengine_get_dma_device() usage
dmaengine: Add support for per channel coherency handling
dmaengine: of-dma: Add support for optional router configuration callback
dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings
dmaengine: ti: k3-udma-glue: Get the ringacc from udma_dev
dmaengine: ti: k3-udma-glue: Add function to get device pointer for DMA API
dmaengine: ti: k3-udma: Add support for second resource range from sysfw
dmaengine: ti: k3-udma: Wait for peer teardown completion if supported
...
* Fix refcounting for unpartitioned MTDs
* Fix misspelled function parameter 'section'
* Remove unneeded break
* cmdline parser: Fix parsing of part-names with colons
* mtdpart: Fix misdocumented function parameter 'mtd'
MTD devices:
* phram:
- Allow the user to set the erase page size
- File headers are not good candidates for kernel-doc
* physmap-bt1-rom: Fix __iomem addrspace removal warning
* plat-ram: correctly free memory on error path in platram_probe()
* powernv_flash: Add function names to headers and fix 'dev'
* docg3: Fix kernel-doc 'bad line' and 'excessive doc' issues
UBI cleanup fixes:
* gluebi: Fix misnamed function parameter documentation
* wl: Fix a couple of kernel-doc issues
* eba: Fix a couple of misdocumentation issues
* kapi: Correct documentation for 'ubi_leb_read_sg's 'sgl' parameter
* Document 'ubi_num' in struct mtd_dev_param
Generic NAND core:
* ECC management:
- Add an I/O request tweaking mechanism
- Entire rework of the software BCH ECC driver, creation of a real
ECC engine, getting rid of raw NAND structures, migration to more
generic prototypes, misc fixes and style cleanup. Moved now to the
Generic NAND layer.
- Entire rework of the software Hamming ECC driver, creation of a
real ECC engine, getting rid of raw NAND structures, misc renames,
comment updates, cleanup, and style fixes. Moved now to the
generic NAND layer.
- Necessary plumbing at the NAND level to retrieve generic NAND ECC
engines (softwares and on-die).
- Update of the bindings.
Raw NAND core:
* Geting rid of the chip->ecc.priv entry.
* Fix miscellaneous typos in kernel-doc
Raw NAND controller drivers:
* Arasan: Document 'anfc_op's 'buf' member
* AU1550: Ensure the presence of the right includes
* Brcmnand: Demote non-conformant kernel-doc headers
* Cafe: Remove superfluous param doc and add another
* Davinci: Do not use extra dereferencing
* Diskonchip: Marking unused variables as __always_unused
* GPMI:
- Fix the driver only sense CS0 R/B issue
- Fix the random DMA timeout issue
- Use a single line for of_device_id
- Use of_device_get_match_data()
- Fix reference count leak in gpmi ops
- Cleanup makefile
- Fix binding matching of clocks on different SoCs
* Ingenic: remove redundant get_device() in ingenic_ecc_get()
* Intel LGM: New NAND controller driver
* Marvell: Drop useless line
* Meson:
- Fix a resource leak in init
- Fix meson_nfc_dma_buffer_release() arguments
* mxc:
- Use device_get_match_data()
- Use a single line for of_device_id
- Remove platform data support
* Omap:
- Fix a bunch of kernel-doc misdemeanours
- Finish ELM half populated function header, demote empty ones
* s3c2410: Add documentation for 2 missing struct members
* Sunxi: Document 'sunxi_nfc's 'caps' member
* Qcom:
- Add support for SDX55
- Support for IPQ6018 QPIC NAND controller
- Fix DMA sync on FLASH_STATUS register read
* Rockchip: New NAND controller driver for RK3308, RK2928 and others
* Sunxi: Add MDMA support
ONENAND:
* bbt: Fix expected kernel-doc formatting
* Fix some kernel-doc misdemeanours
* Fix expected kernel-doc formatting
* Use mtd->oops_panic_write as condition
SPI-NAND core:
* Creation of a SPI-NAND on-die ECC engine
* Move ECC related definitions earlier in the driver
* Fix typo in comment
* Fill a default ECC provider/algorithm
* Remove outdated comment
* Fix OOB read
* Allow the case where there is no ECC engine
* Use the external ECC engine logic
SPI-NAND chip drivers:
* Micron:
- Add support for MT29F2G01AAAED
- Use more specific names
* Macronix:
- Add support for MX35LFxG24AD
- Add support for MX35LFxGE4AD
* Toshiba: Demote non-conformant kernel-doc header
SPI-NOR core:
* Initial support for stateful Octal DTR mode using volatile settings
* Preliminary support for JEDEC 251 (xSPI) and JEDEC 216D standards
* Support for Cypress Semper flash
* Support to specify ECC block size of SPI NOR flashes
* Fixes to avoid clearing of non-volatile Block Protection bits at
probe
* hisi-sfc: Demote non-conformant kernel-doc
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAl/aS1sACgkQJWrqGEe9
VoTOqQgAiu3XfM7iHvFDiz0SVL+RFzqi2jnwXHgGDATTq+vOPwAMaqnqF6xZZZLA
BIKsLwVRJnZ9Vu6Xl2vAPaVob+QKbsvvP9kkk9H/dZJ6IW4XsWFqYotPSQQ/6ZBO
2bmw9nQ0ZcksyUkdASGHuYlW/H5DAtQNQuQxGF5ywlZMxTEnD0wxUD5tccf1o3xk
UYvQsQ0MNMriWCxbcdUXUmDOE9DuPdDysuLDPJs0WLnlNGgwZ/mnLvSRm6wm4nRT
Y/pB6VcTMMEYAsujdf89LjCHlfCQuH5Zls9pxic8GkHjOcEqUeMLLXkkbQ1+61AO
93QsOhKAsju49/aHpbpvwu5SEmLojA==
=1fie
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD core:
- Fix refcounting for unpartitioned MTDs
- Fix misspelled function parameter 'section'
- Remove unneeded break
- cmdline parser: Fix parsing of part-names with colons
- mtdpart: Fix misdocumented function parameter 'mtd'
MTD devices:
- phram:
- Allow the user to set the erase page size
- File headers are not good candidates for kernel-doc
- physmap-bt1-rom: Fix __iomem addrspace removal warning
- plat-ram: correctly free memory on error path in platram_probe()
- powernv_flash: Add function names to headers and fix 'dev'
- docg3: Fix kernel-doc 'bad line' and 'excessive doc' issues
UBI cleanup fixes:
- gluebi: Fix misnamed function parameter documentation
- wl: Fix a couple of kernel-doc issues
- eba: Fix a couple of misdocumentation issues
- kapi: Correct documentation for 'ubi_leb_read_sg's 'sgl' parameter
- Document 'ubi_num' in struct mtd_dev_param
Generic NAND core ECC management:
- Add an I/O request tweaking mechanism
- Entire rework of the software BCH ECC driver, creation of a real
ECC engine, getting rid of raw NAND structures, migration to more
generic prototypes, misc fixes and style cleanup. Moved now to the
Generic NAND layer.
- Entire rework of the software Hamming ECC driver, creation of a
real ECC engine, getting rid of raw NAND structures, misc renames,
comment updates, cleanup, and style fixes. Moved now to the generic
NAND layer.
- Necessary plumbing at the NAND level to retrieve generic NAND ECC
engines (softwares and on-die).
- Update of the bindings.
Raw NAND core:
- Geting rid of the chip->ecc.priv entry.
- Fix miscellaneous typos in kernel-doc
Raw NAND controller drivers:
- Arasan: Document 'anfc_op's 'buf' member
- AU1550: Ensure the presence of the right includes
- Brcmnand: Demote non-conformant kernel-doc headers
- Cafe: Remove superfluous param doc and add another
- Davinci: Do not use extra dereferencing
- Diskonchip: Marking unused variables as __always_unused
- GPMI:
- Fix the driver only sense CS0 R/B issue
- Fix the random DMA timeout issue
- Use a single line for of_device_id
- Use of_device_get_match_data()
- Fix reference count leak in gpmi ops
- Cleanup makefile
- Fix binding matching of clocks on different SoCs
- Ingenic: remove redundant get_device() in ingenic_ecc_get()
- Intel LGM: New NAND controller driver
- Marvell: Drop useless line
- Meson:
- Fix a resource leak in init
- Fix meson_nfc_dma_buffer_release() arguments
- mxc:
- Use device_get_match_data()
- Use a single line for of_device_id
- Remove platform data support
- Omap:
- Fix a bunch of kernel-doc misdemeanours
- Finish ELM half populated function header, demote empty ones
- s3c2410: Add documentation for 2 missing struct members
- Sunxi: Document 'sunxi_nfc's 'caps' member
- Qcom:
- Add support for SDX55
- Support for IPQ6018 QPIC NAND controller
- Fix DMA sync on FLASH_STATUS register read
- Rockchip: New NAND controller driver for RK3308, RK2928 and others
- Sunxi: Add MDMA support
ONENAND:
- bbt: Fix expected kernel-doc formatting
- Fix some kernel-doc misdemeanours
- Fix expected kernel-doc formatting
- Use mtd->oops_panic_write as condition
SPI-NAND core:
- Creation of a SPI-NAND on-die ECC engine
- Move ECC related definitions earlier in the driver
- Fix typo in comment
- Fill a default ECC provider/algorithm
- Remove outdated comment
- Fix OOB read
- Allow the case where there is no ECC engine
- Use the external ECC engine logic
SPI-NAND chip drivers:
- Micron:
- Add support for MT29F2G01AAAED
- Use more specific names
- Macronix:
- Add support for MX35LFxG24AD
- Add support for MX35LFxGE4AD
- Toshiba: Demote non-conformant kernel-doc header
SPI-NOR core:
- Initial support for stateful Octal DTR mode using volatile settings
- Preliminary support for JEDEC 251 (xSPI) and JEDEC 216D standards
- Support for Cypress Semper flash
- Support to specify ECC block size of SPI NOR flashes
- Fixes to avoid clearing of non-volatile Block Protection bits at
probe
- hisi-sfc: Demote non-conformant kernel-doc"
* tag 'mtd/for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (120 commits)
mtd: spinand: macronix: Add support for MX35LFxG24AD
mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others
dt-bindings: mtd: Describe Rockchip RK3xxx NAND flash controller
mtd: rawnand: gpmi: Use a single line for of_device_id
mtd: rawnand: gpmi: Fix the random DMA timeout issue
mtd: rawnand: gpmi: Fix the driver only sense CS0 R/B issue
mtd: rawnand: qcom: Add NAND controller support for SDX55
dt-bindings: qcom_nandc: Add SDX55 QPIC NAND documentation
mtd: rawnand: mxc: Use a single line for of_device_id
mtd: rawnand: mxc: Use device_get_match_data()
mtd: rawnand: meson: Fix a resource leak in init
mtd: rawnand: gpmi: Use of_device_get_match_data()
mtd: rawnand: Add NAND controller support on Intel LGM SoC
dt-bindings: mtd: Add Nand Flash Controller support for Intel LGM SoC
mtd: spinand: micron: Add support for MT29F2G01AAAED
mtd: spinand: micron: Use more specific names
mtd: rawnand: gpmi: fix reference count leak in gpmi ops
dt-bindings: mtd: gpmi-nand: Fix matching of clocks on different SoCs
mtd: spinand: macronix: Add support for MX35LFxGE4AD
mtd: plat-ram: correctly free memory on error path in platram_probe()
...
The connector driver never modifies any cb_id passed to it, so add a const
qualifier to those arguments so callers can declare their struct cb_id as a
constant object.
Fixes build warnings like these when passing a constant struct cb_id:
warning: passing argument 1 of ‘cn_add_callback’ discards ‘const’ qualifier from pointer target
Signed-off-by: Geoff Levand <geoff@infradead.org>
Link: https://lore.kernel.org/r/a9e49c9e-67fa-16e7-0a6b-72f6bd30c58a@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Use local_clock() instead of jiffies in the cpufreq statistics to
improve accuracy (Viresh Kumar).
- Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
drivers (Viresh Kumar).
- Clean up the cpufreq core, the intel_pstate driver and the
schedutil cpufreq governor (Rafael Wysocki).
- Fix up error code paths in the sti-cpufreq and mediatek cpufreq
drivers (Yangtao Li, Qinglang Miao).
- Fix cpufreq_online() to return error codes instead of success (0)
in all cases when it fails (Wang ShaoBo).
- Add mt8167 support to the mediatek cpufreq driver and blacklist
mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).
- Modify the tegra194 cpufreq driver to always return values from
the frequency table as the current frequency and clean up that
driver (Sumit Gupta, Jon Hunter).
- Modify the arm_scmi cpufreq driver to allow it to discover the
power scale present in the performance protocol and provide this
information to the Energy Model (Lukasz Luba).
- Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
Rohár).
- Clean up the CPPC cpufreq driver (Ionela Voinescu).
- Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
Bergmann).
- Rework the poling interval selection for the polling state in
cpuidle (Mel Gorman).
- Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle
driver (Ulf Hansson).
- Modify the OPP framework to support empty (node-less) OPP tables
in DT for passing dependency information (Nicola Mazzucato).
- Fix potential lockdep issue in the OPP core and clean up the OPP
core (Viresh Kumar).
- Modify dev_pm_opp_put_regulators() to accept a NULL argument and
update its users accordingly (Viresh Kumar).
- Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).
- Add support for governor feature flags to devfreq, make devfreq
sysfs file permissions depend on the governor and clean up the
devfreq core (Chanwoo Choi).
- Clean up the tegra20 devfreq driver and deprecate it to allow
another driver based on EMC_STAT to be used instead of it (Dmitry
Osipenko).
- Add interconnect support to the tegra30 devfreq driver, allow it
to take the interconnect and OPP information from DT and clean it
up ((Dmitry Osipenko).
- Add interconnect support to the exynos-bus devfreq driver along
with interconnect properties documentation (Sylwester Nawrocki).
- Add suport for AMD Fam17h and Fam19h processors to the RAPL power
capping driver (Victor Ding, Kim Phillips).
- Fix handling of overly long constraint names in the powercap
framework (Lukasz Luba).
- Fix the wakeup configuration handling for bridges in the ACPI
device power management core (Rafael Wysocki).
- Add support for using an abstract scale for power units in the
Energy Model (EM) and document it (Lukasz Luba).
- Add em_cpu_energy() micro-optimization to the EM (Pavankumar
Kondeti).
- Modify the generic power domains (genpd) framwework to support
suspend-to-idle (Ulf Hansson).
- Fix creation of debugfs nodes in genpd (Thierry Strudel).
- Clean up genpd (Lina Iyer).
- Clean up the core system-wide suspend code and make it print
driver flags for devices with debug enabled (Alex Shi, Patrice
Chotard, Chen Yu).
- Modify the ACPI system reboot code to make it prepare for system
power off to avoid confusing the platform firmware (Kai-Heng Feng).
- Update the pm-graph (multiple changes, mostly usability-related)
and cpupower (online and offline CPU information support) PM
utilities (Todd Brandt, Brahadambal Srinivasan).
-----BEGIN PGP SIGNATURE-----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=BVdX
-----END PGP SIGNATURE-----
Merge tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update cpufreq (core and drivers), cpuidle (polling state
implementation and the PSCI driver), the OPP (operating performance
points) framework, devfreq (core and drivers), the power capping RAPL
(Running Average Power Limit) driver, the Energy Model support, the
generic power domains (genpd) framework, the ACPI device power
management, the core system-wide suspend code and power management
utilities.
Specifics:
- Use local_clock() instead of jiffies in the cpufreq statistics to
improve accuracy (Viresh Kumar).
- Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
drivers (Viresh Kumar).
- Clean up the cpufreq core, the intel_pstate driver and the
schedutil cpufreq governor (Rafael Wysocki).
- Fix up error code paths in the sti-cpufreq and mediatek cpufreq
drivers (Yangtao Li, Qinglang Miao).
- Fix cpufreq_online() to return error codes instead of success (0)
in all cases when it fails (Wang ShaoBo).
- Add mt8167 support to the mediatek cpufreq driver and blacklist
mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).
- Modify the tegra194 cpufreq driver to always return values from the
frequency table as the current frequency and clean up that driver
(Sumit Gupta, Jon Hunter).
- Modify the arm_scmi cpufreq driver to allow it to discover the
power scale present in the performance protocol and provide this
information to the Energy Model (Lukasz Luba).
- Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
Rohár).
- Clean up the CPPC cpufreq driver (Ionela Voinescu).
- Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
Bergmann).
- Rework the poling interval selection for the polling state in
cpuidle (Mel Gorman).
- Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver
(Ulf Hansson).
- Modify the OPP framework to support empty (node-less) OPP tables in
DT for passing dependency information (Nicola Mazzucato).
- Fix potential lockdep issue in the OPP core and clean up the OPP
core (Viresh Kumar).
- Modify dev_pm_opp_put_regulators() to accept a NULL argument and
update its users accordingly (Viresh Kumar).
- Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).
- Add support for governor feature flags to devfreq, make devfreq
sysfs file permissions depend on the governor and clean up the
devfreq core (Chanwoo Choi).
- Clean up the tegra20 devfreq driver and deprecate it to allow
another driver based on EMC_STAT to be used instead of it (Dmitry
Osipenko).
- Add interconnect support to the tegra30 devfreq driver, allow it to
take the interconnect and OPP information from DT and clean it up
(Dmitry Osipenko).
- Add interconnect support to the exynos-bus devfreq driver along
with interconnect properties documentation (Sylwester Nawrocki).
- Add suport for AMD Fam17h and Fam19h processors to the RAPL power
capping driver (Victor Ding, Kim Phillips).
- Fix handling of overly long constraint names in the powercap
framework (Lukasz Luba).
- Fix the wakeup configuration handling for bridges in the ACPI
device power management core (Rafael Wysocki).
- Add support for using an abstract scale for power units in the
Energy Model (EM) and document it (Lukasz Luba).
- Add em_cpu_energy() micro-optimization to the EM (Pavankumar
Kondeti).
- Modify the generic power domains (genpd) framwework to support
suspend-to-idle (Ulf Hansson).
- Fix creation of debugfs nodes in genpd (Thierry Strudel).
- Clean up genpd (Lina Iyer).
- Clean up the core system-wide suspend code and make it print driver
flags for devices with debug enabled (Alex Shi, Patrice Chotard,
Chen Yu).
- Modify the ACPI system reboot code to make it prepare for system
power off to avoid confusing the platform firmware (Kai-Heng Feng).
- Update the pm-graph (multiple changes, mostly usability-related)
and cpupower (online and offline CPU information support) PM
utilities (Todd Brandt, Brahadambal Srinivasan)"
* tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
cpufreq: Fix cpufreq_online() return value on errors
cpufreq: Fix up several kerneldoc comments
cpufreq: stats: Use local_clock() instead of jiffies
cpufreq: schedutil: Simplify sugov_update_next_freq()
cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate()
PM: domains: create debugfs nodes when adding power domains
opp: of: Allow empty opp-table with opp-shared
dt-bindings: opp: Allow empty OPP tables
media: venus: dev_pm_opp_put_*() accepts NULL argument
drm/panfrost: dev_pm_opp_put_*() accepts NULL argument
drm/lima: dev_pm_opp_put_*() accepts NULL argument
PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument
cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument
opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table
opp: Don't create an OPP table from dev_pm_opp_get_opp_table()
cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table
opp: Reduce the size of critical section in _opp_kref_release()
PM / EM: Micro optimization in em_cpu_energy
cpufreq: arm_scmi: Discover the power scale in performance protocol
...
Pull thermal updates from Daniel Lezcano:
- Add upper and lower limits clamps for the cooling device state in the
power allocator governor (Michael Kao)
- Add upper and lower limits support for the power allocator governor
(Lukasz Luba)
- Optimize conditions testing for the trip points (Bernard Zhao)
- Replace spin_lock_irqsave by spin_lock in hard IRQ on the rcar driver
(Tian Tao)
- Add MT8516 dt-bindings and device reset optional support (Fabien
Parent)
- Add a quiescent period to cool down the PCH when entering S0iX
(Sumeet Pawnikar)
- Use bitmap API instead of re-inventing the wheel on sun8i (Yangtao
Li)
- Remove useless NULL check in the hwmon driver (Bernard Zhao)
- Update the current state in the cpufreq cooling device only if the
frequency change is effective (Zhuguangqing)
- Improve the schema validation for the rcar DT bindings (Geert
Uytterhoeven)
- Fix the user time unit in the documentation (Viresh Kumar)
- Add PCI ids for Lewisburg PCH (Andres Freund)
- Add hwmon support on amlogic (Martin Blumenstingl)
- Fix build failure for PCH entering on in S0iX (Randy Dunlap)
- Improve the k_* coefficient for the power allocator governor (Lukasz
Luba)
- Fix missing const on a sysfs attribute (Rikard Falkeborn)
- Remove broken interrupt support on rcar to be replaced by a new one
(Niklas Söderlund)
- Improve the error code handling at init time on imx8mm (Fabio
Estevam)
- Compute interval validity once instead at each temperature reading
iteration on acerhdf (Daniel Lezcano)
- Add r8a779a0 support (Niklas Söderlund)
- Add PCI ids for AlderLake PCH and mmio refactoring (Srinivas
Pandruvada)
- Add RFIM and mailbox support on int340x (Srinivas Pandruvada)
- Use macro for temperature calculation on PCH (Sumeet Pawnikar)
- Simplify return conditions at probe time on Broadcom (Zheng Yongjun)
- Fix workload name on PCH (Srinivas Pandruvada)
- Migrate the devfreq cooling device code to the energy model API
(Lukasz Luba)
- Emit a warning if the thermal_zone_device_update is called without
the .get_temp() ops (Daniel Lezcano)
- Add critical and hot ops for the thermal zone (Daniel Lezcano)
- Remove notification usage when critical is reached on rcar (Daniel
Lezcano)
- Fix devfreq build when ENERGY_MODEL is not set (Lukasz Luba)
* tag 'thermal-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (45 commits)
thermal/drivers/devfreq_cooling: Fix the build when !ENERGY_MODEL
thermal/drivers/rcar: Remove notification usage
thermal/core: Add critical and hot ops
thermal/core: Emit a warning if the thermal zone is updated without ops
drm/panfrost: Register devfreq cooling and attempt to add Energy Model
thermal: devfreq_cooling: remove old power model and use EM
thermal: devfreq_cooling: add new registration functions with Energy Model
thermal: devfreq_cooling: use a copy of device status
thermal: devfreq_cooling: change tracing function and arguments
thermal: int340x: processor_thermal: Correct workload type name
thermal: broadcom: simplify the return expression of bcm2711_thermal_probe()
thermal: intel: pch: use macro for temperature calculation
thermal: int340x: processor_thermal: Add mailbox driver
thermal: int340x: processor_thermal: Add RFIM driver
thermal: int340x: processor_thermal: Add AlderLake PCI device id
thermal: int340x: processor_thermal: Refactor MMIO interface
thermal: rcar_gen3_thermal: Add r8a779a0 support
dt-bindings: thermal: rcar-gen3-thermal: Add r8a779a0 support
platform/x86/drivers/acerhdf: Check the interval value when it is set
platform/x86/drivers/acerhdf: Use module_param_cb to set/get polling interval
...
Pull input updates from Dmitry Torokhov:
- support for inhibiting input devices at request from userspace. If a
device implements open/close methods, it can also put device into low
power state. This is needed, for example, to disable keyboard and
touchpad on convertibles when they are transitioned into tablet mode
- now that ordinary input devices can be configured for polling mode,
dedicated input polling device implementation has been removed
- GTCO tablet driver has been removed, as it used problematic custom
HID parser, devices are EOL, and there is no interest from the
manufacturer
- a new driver for Dialog DA7280 haptic chips has been introduced
- a new driver for power button on Dell Wyse 3020
- support for eKTF2132 in ektf2127 driver
- support for SC2721 and SC2730 in sc27xx-vibra driver
- enhancements for Atmel touchscreens, AD7846 touchscreens, Elan
touchpads, ADP5589, ST1232 touchscreen, TM2 touchkey drivers
- fixes and cleanups to allow clean builds with W=1
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (86 commits)
Input: da7280 - fix spelling mistake "sequemce" -> "sequence"
Input: cyapa_gen6 - fix out-of-bounds stack access
Input: sc27xx - add support for sc2730 and sc2721
dt-bindings: input: Add compatible string for SC2721 and SC2730
dt-bindings: input: Convert sc27xx-vibra.txt to json-schema
Input: stmpe - add axis inversion and swapping capability
Input: adp5589-keys - do not explicitly control IRQ for wakeup
Input: adp5589-keys - do not unconditionally configure as wakeup source
Input: ipx4xx-beeper - convert comma to semicolon
Input: parkbd - convert comma to semicolon
Input: new da7280 haptic driver
dt-bindings: input: Add document bindings for DA7280
MAINTAINERS: da7280 updates to the Dialog Semiconductor search terms
Input: elantech - fix protocol errors for some trackpoints in SMBus mode
Input: elan_i2c - add new trackpoint report type 0x5F
Input: elants - document some registers and values
Input: atmel_mxt_ts - simplify the return expression of mxt_send_bootloader_cmd()
Input: imx_keypad - add COMPILE_TEST support
Input: applespi - use new structure for SPI transfer delays
Input: synaptics-rmi4 - use new structure for SPI transfer delays
...
Core:
- support "prefer busy polling" NAPI operation mode, where we defer softirq
for some time expecting applications to periodically busy poll
- AF_XDP: improve efficiency by more batching and hindering
the adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or unaligned
reads making zero copy a performance win for much smaller messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined in
IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which
also allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to
a central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GXs1
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- support "prefer busy polling" NAPI operation mode, where we defer
softirq for some time expecting applications to periodically busy
poll
- AF_XDP: improve efficiency by more batching and hindering the
adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or
unaligned reads making zero copy a performance win for much smaller
messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use
bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined
in IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver
internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which also
allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to a
central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support"
* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
net: hns3: fix expression that is currently always true
net: fix proc_fs init handling in af_packet and tls
nfc: pn533: convert comma to semicolon
af_vsock: Assign the vsock transport considering the vsock address flags
af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
vsock_addr: Check for supported flag values
vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
vm_sockets: Add flags field in the vsock address data structure
net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
nfc: s3fwrn5: Release the nfc firmware
net: vxget: clean up sparse warnings
mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
mlxsw: reg: Add Router LPM Cache Enable Register
mlxsw: reg: Add Router LPM Cache ML Delete Register
mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
mlxsw: reg: Add XM Router M Table Register
...
* pm-cpuidle:
cpuidle: Select polling interval based on a c-state with a longer target residency
cpuidle: psci: Enable suspend-to-idle for PSCI OSI mode
PM: domains: Enable dev_pm_genpd_suspend|resume() for suspend-to-idle
PM: domains: Rename pm_genpd_syscore_poweroff|poweron()
* pm-em:
PM / EM: Micro optimization in em_cpu_energy
PM: EM: Update Energy Model with new flag indicating power scale
PM: EM: update the comments related to power scale
PM: EM: Clarify abstract scale usage for power values in Energy Model
I wanted to look up something and noticed the hyperlink doesn't work.
While fixing that also noticed a trivial kerneldoc comment typo in the
same section, fix that too.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204200242.2671481-1-daniel.vetter@ffwll.ch
- Consolidate all kmap_atomic() internals into a generic implementation
which builds the base for the kmap_local() API and make the
kmap_atomic() interface wrappers which handle the disabling/enabling of
preemption and pagefaults.
- Switch the storage from per-CPU to per task and provide scheduler
support for clearing mapping when scheduling out and restoring them
when scheduling back in.
- Merge the migrate_disable/enable() code, which is also part of the
scheduler pull request. This was required to make the kmap_local()
interface available which does not disable preemption when a mapping
is established. It has to disable migration instead to guarantee that
the virtual address of the mapped slot is the same accross preemption.
- Provide better debug facilities: guard pages and enforced utilization
of the mapping mechanics on 64bit systems when the architecture allows
it.
- Provide the new kmap_local() API which can now be used to cleanup the
kmap_atomic() usage sites all over the place. Most of the usage sites
do not require the implicit disabling of preemption and pagefaults so
the penalty on 64bit and 32bit non-highmem systems is removed and quite
some of the code can be simplified. A wholesale conversion is not
possible because some usage depends on the implicit side effects and
some need to be cleaned up because they work around these side effects.
The migrate disable side effect is only effective on highmem systems
and when enforced debugging is enabled. On 64bit and 32bit non-highmem
systems the overhead is completely avoided.
-----BEGIN PGP SIGNATURE-----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=n71I
-----END PGP SIGNATURE-----
Merge tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull kmap updates from Thomas Gleixner:
"The new preemtible kmap_local() implementation:
- Consolidate all kmap_atomic() internals into a generic
implementation which builds the base for the kmap_local() API and
make the kmap_atomic() interface wrappers which handle the
disabling/enabling of preemption and pagefaults.
- Switch the storage from per-CPU to per task and provide scheduler
support for clearing mapping when scheduling out and restoring them
when scheduling back in.
- Merge the migrate_disable/enable() code, which is also part of the
scheduler pull request. This was required to make the kmap_local()
interface available which does not disable preemption when a
mapping is established. It has to disable migration instead to
guarantee that the virtual address of the mapped slot is the same
across preemption.
- Provide better debug facilities: guard pages and enforced
utilization of the mapping mechanics on 64bit systems when the
architecture allows it.
- Provide the new kmap_local() API which can now be used to cleanup
the kmap_atomic() usage sites all over the place. Most of the usage
sites do not require the implicit disabling of preemption and
pagefaults so the penalty on 64bit and 32bit non-highmem systems is
removed and quite some of the code can be simplified. A wholesale
conversion is not possible because some usage depends on the
implicit side effects and some need to be cleaned up because they
work around these side effects.
The migrate disable side effect is only effective on highmem
systems and when enforced debugging is enabled. On 64bit and 32bit
non-highmem systems the overhead is completely avoided"
* tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
ARM: highmem: Fix cache_is_vivt() reference
x86/crashdump/32: Simplify copy_oldmem_page()
io-mapping: Provide iomap_local variant
mm/highmem: Provide kmap_local*
sched: highmem: Store local kmaps in task struct
x86: Support kmap_local() forced debugging
mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL
microblaze/mm/highmem: Add dropped #ifdef back
xtensa/mm/highmem: Make generic kmap_atomic() work correctly
mm/highmem: Take kmap_high_get() properly into account
highmem: High implementation details and document API
Documentation/io-mapping: Remove outdated blurb
io-mapping: Cleanup atomic iomap
mm/highmem: Remove the old kmap_atomic cruft
highmem: Get rid of kmap_types.h
xtensa/mm/highmem: Switch to generic kmap atomic
sparc/mm/highmem: Switch to generic kmap atomic
powerpc/mm/highmem: Switch to generic kmap atomic
nds32/mm/highmem: Switch to generic kmap atomic
...
of the churn behind us. Significant stuff in this pull includes:
- A set of new Chinese translations
- Italian translation updates
- A mechanism from Mauro to automatically format Documentation/features
for the built docs
- Automatic cross references without explicit :ref: markup
- A new reset-controller document
- An extensive new document on reporting problems from Thorsten
That last patch also adds the CC-BY-4.0 license to LICENSES/dual; there was
some discussion on this, but we seem to have consensus and an ack from Greg
for that addition.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl/XyewPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YUeYH/AiNNlVIF/80T45TAkm+1kpy2Fb+d/5wbtGK
PB7OTXPyDmmqwZNldlF9IsRhp5W+wYC3PNlulYMG44hT7/Jqf2CMFw8SOZqGLmBV
LhWwoS+TAWLB19IOOMrVXbhAlNsX01NwBDY/dwONjW1Jcu+tuAsBR47T9lKjw4kJ
qGFGMQTvZG9Ig1x7E6X38mAd7W3SD1viNuUePS2YcoB15GAocWfVVHvu1r+RHUTS
27ET8tWzMMuiaCAD6toVY9L4T7iCI7YSPXQm8BOkf/f4LXDnpo8Fo11LE5ozTAh3
+avnNt8vnrRXc06MnzwsvNHm2TqN97B4shkeDiPAV3ySXI8Zu/w=
=HScX
-----END PGP SIGNATURE-----
Merge tag 'docs-5.11' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A much quieter cycle for documentation (happily), with, one hopes, the
bulk of the churn behind us. Significant stuff in this pull includes:
- A set of new Chinese translations
- Italian translation updates
- A mechanism from Mauro to automatically format
Documentation/features for the built docs
- Automatic cross references without explicit :ref: markup
- A new reset-controller document
- An extensive new document on reporting problems from Thorsten
That last patch also adds the CC-BY-4.0 license to LICENSES/dual;
there was some discussion on this, but we seem to have consensus and
an ack from Greg for that addition"
* tag 'docs-5.11' of git://git.lwn.net/linux: (50 commits)
docs: fix broken cross reference in translations/zh_CN
docs: Note that sphinx 1.7 will be required soon
docs: update requirements to install six module
docs: reporting-issues: move 'outdated, need help' note to proper place
docs: Update documentation to reflect what TAINT_CPU_OUT_OF_SPEC means
docs: add a reset controller chapter to the driver API docs
docs: make reporting-bugs.rst obsolete
docs: Add a new text describing how to report bugs
LICENSES: Add the CC-BY-4.0 license
Documentation: fix multiple typos found in the admin-guide subdirectory
Documentation: fix typos found in admin-guide subdirectory
kernel-doc: Fix example in Nested structs/unions
docs: clean up sysctl/kernel: titles, version
docs: trace: fix event state structure name
docs: nios2: add missing ReST file
scripts: get_feat.pl: reduce table width for all features output
scripts: get_feat.pl: change the group by order
scripts: get_feat.pl: make complete table more coincise
scripts: kernel-doc: fix parsing function-like typedefs
Documentation: fix typos found in process, dev-tools, and doc-guide subdirectories
...
-----BEGIN PGP SIGNATURE-----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=mi60
-----END PGP SIGNATURE-----
Merge tag 'media/v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- some rework at the uAPI pixel format docs
- the smiapp driver has started to gain support for MIPI CSS camera
sensors and was renamed
- two new sensor drivers: ov02a10 and ov9734
- Meson gained a driver for the 2D acceleration unit
- Rockchip rkisp1 driver was promoted from staging
- Cedrus driver gained support for VP8
- two new remote controller keymaps were added
- the usual set of fixes cleanups and driver improvements
* tag 'media/v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (447 commits)
media: ccs: Add support for obtaining C-PHY configuration from firmware
media: ccs-pll: Print pixel rates
media: ccs: Print written register values
media: ccs: Add support for DDR OP SYS and OP PIX clocks
media: ccs-pll: Add support for DDR OP system and pixel clocks
media: ccs: Dual PLL support
media: ccs-pll: Add trivial dual PLL support
media: ccs-pll: Separate VT divisor limit calculation from the rest
media: ccs-pll: Fix VT post-PLL divisor calculation
media: ccs-pll: Make VT divisors 16-bit
media: ccs-pll: Rework bounds checks
media: ccs-pll: Print relevant information on PLL tree
media: ccs-pll: Better separate OP and VT sub-tree calculation
media: ccs-pll: Check for derating and overrating, support non-derating sensors
media: ccs-pll: Split off VT subtree calculation
media: ccs-pll: Add C-PHY support
media: ccs-pll: Add sanity checks
media: ccs-pll: Add support flexible OP PLL pixel clock divider
media: ccs-pll: Support two cycles per pixel on OP domain
media: ccs-pll: Add support for extended input PLL clock divider
...
Jonathan Neuschäfer
Linus Torvalds
Ben Widawsky
Dan Williams
Ezequiel Garcia
Flavio Suligoi
Andy Shevchenko
ivan tkachenko
Sakari Ailus
Parav Pandit
Daniel Lezcano
Johannes Thumshirn
Joe Perches
Maximilian Luz
Geoff Levand
Daniel Vetter
Rafael J. Wysocki