Граф коммитов

573 Коммитов

Автор SHA1 Сообщение Дата
Josh Boyer 7abdd34dbf watchdog: Cleanup WATCHDOG_CORE help text
The newly added WATCHDOG_CORE option is a bool, but the help text suggests
it can be built as a module.  Fix it up.

Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-08-02 08:23:07 +00:00
Mart Gerrits 6b01d30eef watchdog: Fix POST failure on ASUS P5N32-E SLI and similar boards
At present the module does not unset the NO_REBOOT bit upon shutdown, this
causes the BIOS to fail the POST once and reset. During the next boot it
displays the following error message:

***** Warning: System BOOT Fail *****
Your system last boot fail or POST interrupted.
Please enter setup to load default and reboot again.
Press F1 to continue, DEL to enter SETUP

With this patch the NO_REBOOT flag will be unset on shutdown and thus stop
this failure from occurring.

Tested on 'ASUS P5N32-E SLI with BIOS revision 1801' and
          'ASUS P5N32-E SLI PLUS with BIOS revision 1502'.

Signed-off-by: Mart Gerrits <mart1987@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-08-02 08:22:54 +00:00
David Engraf bea1906620 watchdog: shwdt: fix usage of mod_timer
Fix the usage of mod_timer() and make the driver usable. mod_timer() must
be called with an absolute timeout in jiffies. The old implementation
used a relative timeout thus the hardware watchdog was never triggered.

Signed-off-by: David Engraf <david.engraf@sysgo.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Wim Van sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable <stable@kernel.org>
2011-08-02 08:22:49 +00:00
Linus Torvalds 2313bcdcc9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-watchdog: (25 commits)
  watchdog: WatchDog Timer Driver Core - Add minimum and max timeout
  watchdog: WatchDog Timer Driver Core - Add ioctl call
  watchdog: WatchDog Timer Driver Core - Add nowayout feature
  watchdog: WatchDog Timer Driver Core - Add Magic Close feature
  watchdog: WatchDog Timer Driver Core - Add WDIOC_SETTIMEOUT and WDIOC_GETTIMEOUT ioctl
  watchdog: WatchDog Timer Driver Core - Add WDIOC_SETOPTIONS ioctl
  watchdog: WatchDog Timer Driver Core - Add WDIOC_KEEPALIVE ioctl
  watchdog: WatchDog Timer Driver Core - Add basic ioctl functionality
  watchdog: WatchDog Timer Driver Core - Add basic framework
  watchdog: hpwdt: add next gen HP servers
  watchdog: it8712f_wdt.c: improve includes
  watchdog: at91sam9/wdt: move register header to drivers
  watchdog: Add Xilinx watchdog timer driver
  watchdog: remove empty pm-functions
  watchdog: sp805: Flush posted writes in enable/disable.
  watchdog: sp805: Don't write 0 to the load value register.
  watchdog: imx2_wdt: add device tree probe support
  watchdog: s3c2410: Add support for device tree based probe
  watchdog: mpcore_wdt: Add suspend/resume support.
  watchdog: mtx1-wdt: use dev_{err,info} instead of printk()
  ...
2011-07-29 23:28:47 -07:00
Wim Van Sebroeck 3f43f68e29 watchdog: WatchDog Timer Driver Core - Add minimum and max timeout
Add min_timeout (minimum timeout) and max_timeout
values so that the framework can check if the new
timeout value is between the minimum and maximum
timeout values. If both values are 0, then the
framework will leave the check for the watchdog
device driver itself.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-07-28 08:01:18 +00:00
Wim Van Sebroeck 78d88fc012 watchdog: WatchDog Timer Driver Core - Add ioctl call
Add support for extra ioctl calls by adding a
ioctl watchdog operation. This operation will be
called before we do our own handling of ioctl
commands. This way we can override the internal
ioctl command handling and we can also add
extra ioctl commands. The ioctl watchdog operation
should return the appropriate error codes or
-ENOIOCTLCMD if the ioctl command should be handled
through the internal ioctl handling of the framework.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-07-28 08:01:16 +00:00
Wim Van Sebroeck 7e192b9c42 watchdog: WatchDog Timer Driver Core - Add nowayout feature
Add support for the nowayout feature to the
WatchDog Timer Driver Core framework.
This feature prevents the watchdog timer from being
stopped.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-07-28 08:01:14 +00:00
Wim Van Sebroeck 017cf08051 watchdog: WatchDog Timer Driver Core - Add Magic Close feature
Add support for the Magic Close feature to the
WatchDog Timer Driver Core framework.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-07-28 08:01:12 +00:00
Wim Van Sebroeck 014d694e5d watchdog: WatchDog Timer Driver Core - Add WDIOC_SETTIMEOUT and WDIOC_GETTIMEOUT ioctl
This part add's the WDIOC_SETTIMEOUT and WDIOC_GETTIMEOUT ioctl
functionality to the WatchDog Timer Driver Core framework.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-07-28 08:01:11 +00:00
Wim Van Sebroeck 234445b4e4 watchdog: WatchDog Timer Driver Core - Add WDIOC_SETOPTIONS ioctl
This part add's the WDIOC_SETOPTIONS ioctl functionality
to the WatchDog Timer Driver Core framework.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-07-28 08:01:09 +00:00
Wim Van Sebroeck c2dc00e494 watchdog: WatchDog Timer Driver Core - Add WDIOC_KEEPALIVE ioctl
This part add's the WDIOC_KEEPALIVE ioctl functionality to the
WatchDog Timer Driver Core framework. Please note that the
WDIOF_KEEPALIVEPING bit has to be set in the watchdog_info
options field.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-07-28 08:01:07 +00:00
Wim Van Sebroeck 2fa03560ab watchdog: WatchDog Timer Driver Core - Add basic ioctl functionality
This part add's the basic ioctl functionality to the
WatchDog Timer Driver Core framework. The supported
ioctl call's are:
	WDIOC_GETSUPPORT
	WDIOC_GETSTATUS
	WDIOC_GETBOOTSTATUS

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-07-28 08:01:05 +00:00
Wim Van Sebroeck 43316044d4 watchdog: WatchDog Timer Driver Core - Add basic framework
The WatchDog Timer Driver Core is a framework
that contains the common code for all watchdog-driver's.
It also introduces a watchdog device structure and the
operations that go with it.

This is the introduction of this framework. This part
supports the minimal watchdog userspace API (or with
other words: the functionality to use /dev/watchdog's
open, release and write functionality as defined in
the simplest watchdog API). Extra functionality will
follow in the next set of patches.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-07-28 08:01:04 +00:00
Thomas Mingarelli 5efc7a6222 watchdog: hpwdt: add next gen HP servers
This patch is required to enable hpwdt to work on next generation HP servers
with iLO.

Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-28 08:00:56 +00:00
Arun Sharma 60063497a9 atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Wim Van Sebroeck 2260286886 watchdog: it8712f_wdt.c: improve includes
remove unneeded pci.h include.
and include ioport.h to avoid build errors for the region functions.

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-26 21:28:23 +00:00
Jean-Christophe Plagniol-Villard e7b39145b5 watchdog: at91sam9/wdt: move register header to drivers
move register header to drivers

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-26 21:22:15 +00:00
Alejandro Cabrera e9659e69b0 watchdog: Add Xilinx watchdog timer driver
Watchdog timer device driver for Xilinx xps_timebase_wdt compatible ip cores.
It takes watchdog timer configuration from device tree and it needs that its
parent has defined the property "clock-frecuency".
It is compatible with watchdog timer kernel API, so user apps like watchdogd
may talk with it.

Signed-off-by: Alejandro Cabrera <aldaya@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-26 21:21:29 +00:00
Wolfram Sang 2fc5d52b21 watchdog: remove empty pm-functions
While checking what watchdog drivers usually do in suspend/resume to
spot common behaviour for the watchdog framework, I found these drivers
which do nothing but add some cruft. Remove it, it is superfluous. New
approaches should probably be done with pm_ops anyway.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-26 21:21:16 +00:00
Nick Bowler 081d83a339 watchdog: sp805: Flush posted writes in enable/disable.
There are no reads in these functions, so if MMIO writes are posted,
the writes in enable/disable may not have completed by the time these
functions return.  If the functions run from different CPUs, it's
in theory possible for the writes to be interleaved, which would be
disastrous for this driver.

At the very least, we need an mmiowb() before releasing the lock, but
since it seems desirable for the watchdog timer to be actually stopped
or reset when these functions return, read the lock register to force
the writes out.

Signed-off-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-26 21:19:56 +00:00
Nick Bowler da3e515024 watchdog: sp805: Don't write 0 to the load value register.
At least on the Versatile Express' V2M, calling wdt_disable followed by
wdt_enable, for instance by running the following sequence:

  echo V > /dev/watchdog; echo V > /dev/watchdog

results in an immediate reset.  The wdt_disable function writes 0 to the
load register; while the watchdog interrupts are disabled at this point,
this special value is defined to trigger an interrupt immediately.  It
appears that in this instance, the reset happens when the interrupts
are subsequently enabled by wdt_enable.

Putting in a short delay after writing a new load value in wdt_enable
solves the issue, but it seems cleaner to simply never write 0 to the
load register at all: according to the hardware docs, writing 0 to the
control register suffices to stop the counter, and the write of 0 to
the load register is questionable anyway since this register resets to
0xffffffff.

Signed-off-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-26 21:19:43 +00:00
Shawn Guo f5a427eede watchdog: imx2_wdt: add device tree probe support
Adds device tree probe support for imx2_wdt driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-26 21:19:16 +00:00
Thomas Abraham 9487a9cc71 watchdog: s3c2410: Add support for device tree based probe
This patch adds the of_match_table to enable s3c2410-wdt driver
to be probed when watchdog device node is found in the device tree.

Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-22 09:00:43 +00:00
Peter Fordham 641e4f4495 watchdog: mpcore_wdt: Add suspend/resume support.
Add support for suspend and resume to the MPCore watchdog driver.

Signed-off-by: Peter Fordham <peter.fordham@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-22 09:00:20 +00:00
Florian Fainelli fad0a9dd0d watchdog: mtx1-wdt: use dev_{err,info} instead of printk()
use dev_{err,info} instead of printk(KERN_{ERR,INFO} ...)

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-22 08:59:43 +00:00
Sascha Hauer bfbc5e272d watchdog: i.MX: use IMX_HAVE_PLATFORM_IMX2_WDT to depend on
The i.MX architecture provides IMX_HAVE_PLATFORM_* macros to signal
that a selected SoC supports a certain hardware. Use them instead of
depending on ARCH_* directly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-watchdog@vger.kernel.org
2011-07-22 08:58:38 +00:00
Jamie Iles c9353ae1c6 watchdog: add support for the Synopsys DesignWare WDT
The Synopsys DesignWare watchdog is found in several ARM based systems
and provides a choice of 16 timeout periods depending on the clock
input.  The watchdog cannot be disabled once started.

Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-22 08:57:38 +00:00
Jonathan McDowell 7ccdb9467b watchdog: pc87413_wdt: Cleanup pc87413 watchdog driver to use
Inspired by Nat Gurumoorthy's recent patches for cleaning up the it87
drivers to use request_muxed_region for accessing the SuperIO area on
these chips, and the fact I have a GPIO driver for the pc8741x basically
ready for submission, here is a patch to cleanup the pc87413 watchdog
driver to use request_muxed_region for accessing the SuperIO area.

It also pulls out the details about the SWC IO area on initial driver
load, and properly does a request_region for that area - there's no
requirement to touch the SuperIO area after doing the initial watchdog
enable and IO base retrieval.

While I have hardware with a pc87413 on it it is not wired in a way that
allows the watchdog to reboot the machine, so I have not been able to
fully test these changes - I have checked that the driver correctly
initialises itself still and requests the SWC io region ok.

Signed-Off-By: Jonathan McDowell <noodles@earth.li>
Signed-Off-By: Wim Van Sebroeck <wim@iguana.be>
2011-07-22 08:56:41 +00:00
Wim Van Sebroeck 97b08a6221 watchdog: iTCO_wdt: clean-up PCI device ID's
Clean up of the iTCO_wdt PCI device ID's.
Own macro is replaced by the PCI_VDEVICE macro.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-22 08:56:11 +00:00
Nat Gurumoorthy a134b82560 watchdog: Use "request_muxed_region" in it87 watchdog drivers
Changes the it87 watchdog drivers to use "request_muxed_region".
Serialize access to the hardware by using "request_muxed_region" macro defined
by Alan Cox. Call to this macro will hold off the requestor if the resource is
currently busy. 

The use of the above macro makes it possible to get rid of
spinlocks in it8712f_wdt.c and it87_wdt.c watchdog drivers.
This also greatly simplifies the implementation of it87_wdt.c driver.

 "superio_enter" will return an error if call to "request_muxed_region" fails. 
Rest of the code change is to ripple an error return from superio_enter to
the top level.

Signed-off-by: Nat Gurumoorthy <natg@google.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-22 08:55:23 +00:00
Randy Dunlap f71d26bb65 watchdog: hpwdt depends on PCI
hpwdt is a PCI driver so it should depend on PCI.
Fixes these build errors:

drivers/watchdog/hpwdt.c:762: error: implicit declaration of function 'pci_iomap'
drivers/watchdog/hpwdt.c:762: warning: assignment makes pointer from integer without a cast
drivers/watchdog/hpwdt.c:797: error: implicit declaration of function 'pci_iounmap'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: Thomas Mingarelli <thomas.mingarelli@hp.com>
2011-07-17 12:40:08 +00:00
Olaf Hering 2a75ca4a43 watchdog: fix hpwdt Kconfig regression in 3.0-rc
Remove Kconfig regression caused by commit
a4616153de "watchdog: hpwdt: build hpwdt as
module by default with NMI_DECODING enabled"

With the above change applied, hpwdt will be enabled unconditionally by just
entering the Watchdog subscreen in menuconfig. Since this driver is not
essential to boot any box it should remain disabled until it gets manually
enabled, just like all other drivers.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Tony Camuso <tcamuso@redhat.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2011-07-16 06:06:12 +00:00
Hans-Christian Egtvedt aeb0aea143 watchdog: update author email for at32ap700x_wdt
This patch updates the email address of the at32ap700x_wdt driver supported by
me to an email account I will use on a more regular basis in the future.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-06-28 20:01:25 +00:00
Axel Lin ae2a006074 watchdog: gef_wdt: fix MODULE_ALIAS
Remove the space between "platform:" prefix and the driver name.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-06-28 07:43:00 +00:00
Jesper Juhl e376fd664b watchdog: Intel SCU Watchdog: Fix build and remove duplicate code
Trying to build the Intel SCU Watchdog fails for me with gcc 4.6.0 -
$ gcc --version | head -n 1
gcc (GCC) 4.6.0 20110513 (prerelease)

like this :
  CC      drivers/watchdog/intel_scu_watchdog.o
In file included from drivers/watchdog/intel_scu_watchdog.c:49:0:
/home/jj/src/linux-2.6/arch/x86/include/asm/apb_timer.h: In function ‘apbt_time_init’:
/home/jj/src/linux-2.6/arch/x86/include/asm/apb_timer.h:65:42: warning: ‘return’ with a value, in function returning void [enabled by default]
drivers/watchdog/intel_scu_watchdog.c: In function ‘intel_scu_watchdog_init’:
drivers/watchdog/intel_scu_watchdog.c:468:2: error: implicit declaration of function ‘sfi_get_mtmr’ [-Werror=implicit-function-declaration]
drivers/watchdog/intel_scu_watchdog.c:468:32: warning: assignment makes pointer from integer without a cast [enabled by default]
cc1: some warnings being treated as errors

make[1]: *** [drivers/watchdog/intel_scu_watchdog.o] Error 1
make: *** [drivers/watchdog/intel_scu_watchdog.o] Error 2

Additionally, linux/types.h is needlessly being included twice in 
drivers/watchdog/intel_scu_watchdog.c

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-06-28 07:42:50 +00:00
Florian Fainelli db98f89a28 watchdog: mtx1-wdt: fix section mismatch
Fix section mismatch and remove unused variable 'tmp'.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-06-28 07:42:40 +00:00
Florian Fainelli 2ea4e76e99 watchdog: mtx1-wdt: fix GPIO toggling
Commit e391be76 (MIPS: Alchemy: Clean up GPIO registers and accessors)
changed the way the GPIO was toggled. Prior to this patch, we would
always actively drive the GPIO output to either 0 or 1, this patch
drove the GPIO active to 0, and put the GPIO in tristate to drive it
to 1, unfortunately this does not work, revert back to active driving.

Using a signed variable (gstate) to hold the gpio state and using a bit-
wise operation on it also resulted in toggling value from 1 to -2 since
the variable is signed. This value was then passed on to gpio_direction_
output, which always perform a if (value) ... to set the value to the
gpio, so we were always writing a 1 to this GPIO instead of 1 -> 0 -> 1 ...

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@kernel.org>
2011-06-28 07:42:30 +00:00
Florian Fainelli 9b19d40aa3 watchdog: mtx1-wdt: request gpio before using it
Otherwise, the gpiolib autorequest feature will produce a WARN_ON():

WARNING: at drivers/gpio/gpiolib.c:101 0x8020ec6c()
autorequest GPIO-215
[...]

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@kernel.org>
2011-06-28 07:42:23 +00:00
Mark Brown 076bad7c4d watchdog: Handle multiple wm831x watchdogs being registered
Due to the whole single instance based watchdog API we use static data
for the wm831x watchdog which means that if the system tries to register
a second one we end up trying to register the same miscdevice again,
corrupting the miscdevice list. Work around this by checking for duplicate
registrations until we get a watchdog core.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-06-28 07:42:16 +00:00
Samuel Ortiz 9abd768a8d mfd: Use mfd cell platform_data for rdc321x cells platform bits
With the addition of a platform device mfd_cell pointer, MFD drivers
can go back to passing platform data back to their sub drivers.
This allows for an mfd_cell->mfd_data removal and thus keep the
sub drivers MFD agnostic. This is mostly needed for non MFD aware
sub drivers.

Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26 19:45:06 +02:00
Linus Torvalds 57d19e80f4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  b43: fix comment typo reqest -> request
  Haavard Skinnemoen has left Atmel
  cris: typo in mach-fs Makefile
  Kconfig: fix copy/paste-ism for dell-wmi-aio driver
  doc: timers-howto: fix a typo ("unsgined")
  perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c
  md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
  treewide: fix a few typos in comments
  regulator: change debug statement be consistent with the style of the rest
  Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations"
  audit: acquire creds selectively to reduce atomic op overhead
  rtlwifi: don't touch with treewide double semicolon removal
  treewide: cleanup continuations and remove logging message whitespace
  ath9k_hw: don't touch with treewide double semicolon removal
  include/linux/leds-regulator.h: fix syntax in example code
  tty: fix typo in descripton of tty_termios_encode_baud_rate
  xtensa: remove obsolete BKL kernel option from defconfig
  m68k: fix comment typo 'occcured'
  arch:Kconfig.locks Remove unused config option.
  treewide: remove extra semicolons
  ...
2011-05-23 09:12:26 -07:00
Manuel Lauss b7f720d68c MIPS: Alchemy: Clean up GPIO registers and accessors
remove au_readl/au_writel, remove the predefined GPIO1/2 KSEG1 register
addresses and fix the fallout in all boards and drivers.

This also fixes a bug in the mtx-1_wdt driver which was introduced by
commit 6ea8115bb6
("Convert mtx1 wdt to be a platform device and use generic GPIO API")
before this patch mtx-1_wdt only modified GPIO215, the patch then
used the gpio resource information as bit index into the GPIO2 register
but the conversion to the GPIO API didn't realize that.
With this patch the drivers original behaviour is restored and GPIO15
is left alone.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: Florian Fainelli <florian@openwrt.org>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: linux-watchdog@vger.kernel.org
Cc: Wim Van Sebroeck <wim@iguana.be>
Patchwork: https://patchwork.linux-mips.org/patch/2381/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-05-19 09:55:46 +01:00
John Crispin 2f58b8d04e MIPS: Lantiq: Add watchdog support
This patch adds the driver for the watchdog found inside the Lantiq SoC family.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-mips@linux-mips.org
Cc: linux-watchdog@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2327/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:43 +01:00
Grant Likely b1608d69cb drivercore: revert addition of of_match to struct device
Commit b826291c, "drivercore/dt: add a match table pointer to struct
device" added an of_match pointer to struct device to cache the
of_match_table entry discovered at driver match time.  This was unsafe
because matching is not an atomic operation with probing a driver.  If
two or more drivers are attempted to be matched to a driver at the
same time, then the cached matching entry pointer could get
overwritten.

This patch reverts the of_match cache pointer and reworks all users to
call of_match_device() directly instead.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-18 12:32:23 -06:00
Seth Heasley aa1f465225 watchdog: iTCO_wdt: TCO Watchdog patch for Intel Panther Point PCH
This patch adds the TCO Watchdog DeviceIDs for the Intel Panther Point PCH.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-04-26 12:50:44 +00:00
Jiri Kosina 07f9479a40 Merge branch 'master' into for-next
Fast-forwarded to current state of Linus' tree as there are patches to be
applied for files that didn't exist on the old branch.
2011-04-26 10:22:59 +02:00
Joe Perches 06794eaeb7 treewide: Fix iomap resource size miscalculations
Convert off-by-1 r->end - r->start to resource_size(r)

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: David Brown <davidb@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-10 17:01:04 +02:00
Peter Korsgaard d856b41846 watchdog: mpc8xxx_wdt: fix build
Since 1c48a5c93d (dt: Eliminate of_platform_{,un}register_driver)
mpc8xxx_wdt no longer builds as it tries to refer to a 'match' variable
rather than ofdev->dev.of_match that it checks just before.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-04-07 20:20:24 +00:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Anithra P Janakiraman 7fff4beb31 watchdog: softdog.c: enhancement to optionally invoke panic instead of reboot on timer expiry
This is needed for determining the reason for failure when a softdog
timeout occurs.

We use softdog to watch for critical application failures and at the
minimum a snapshot of the system would help to determine the cause.  In
such a scenario the application could fail but there isn't a softlockup as
such, hence the detect softlockup feature does not help.

The patch adds a module parameter soft_panic which when set to 1 causes
softdog to invoke panic instead of reboot when the softdog timer expires. 
By invoking panic we execute kdump if it is configured and the vmcore
generated by kdump should provide atleast a minimal idea of the reason for
failure.

Based on an original patch by Ken Sugawara <sugaken.r3@gmail.com>
Signed-off-by: Anithra P J <anithra@linux.vnet.ibm.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2011-03-29 11:56:22 +00:00