Граф коммитов

16 Коммитов

Автор SHA1 Сообщение Дата
Prasad Joshi d2dcd9083f logfs: destroy the reserved inodes while unmounting
We were assuming that the evict_inode() would never be called on
reserved inodes. However, (after the commit 8e22c1a4e logfs: get rid
of magical inodes) while unmounting the file system, in put_super, we
call iput() on all of the reserved inodes.

The following simple test used to cause a kernel panic on LogFS:

1. Mount a LogFS file system on /mnt

2. Create a file
   $ touch /mnt/a

3. Try to unmount the FS
   $ umount /mnt

The simple fix would be to drop the assumption and properly destroy
the reserved inodes.

Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
2012-04-02 09:20:33 +05:30
Cong Wang 50bc9b65b6 logfs: remove the second argument of k[un]map_atomic()
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20 21:48:24 +08:00
Joern Engel 1bcceaff8c logfs: Free areas before calling generic_shutdown_super()
Or hit an assertion in map_invalidatepage() instead.

Signed-off-by: Joern Engel <joern@logfs.org>
2012-01-28 11:42:39 +05:30
Prasad Joshi 96150606e2 logfs: update page reference count for pined pages
LogFS sets PG_private flag to indicate a pined page. We assumed that
marking a page as private is enough to ensure its existence. But
instead it is necessary to hold a reference count to the page.

The change resolves the following BUG

BUG: Bad page state in process flush-253:16  pfn:6a6d0
page flags: 0x100000000000808(uptodate|private)

Suggested-and-Acked-by: Joern Engel <joern@logfs.org>
Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
2012-01-28 11:23:10 +05:30
Al Viro 8e22c1a4e4 logfs: get rid of magical inodes
ordering problems at ->kill_sb() time are solved by doing iput()
of these suckers in ->put_super()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:48:26 -04:00
Joern Engel 20503664b0 logfs: survive logfs_buf_recover read errors
Refusing to mount beats a kernel crash.

Signed-off-by: Joern Engel <joern@logfs.org>
2010-05-04 19:37:04 +02:00
Linus Torvalds 255f41c595 Merge git://git.kernel.org/pub/scm/linux/kernel/git/joern/logfs
* git://git.kernel.org/pub/scm/linux/kernel/git/joern/logfs:
  [LogFS] Split large truncated into smaller chunks
  [LogFS] Set s_bdi
  [LogFS] Prevent mempool_destroy NULL pointer dereference
  [LogFS] Move assertion
  [LogFS] Plug 8 byte information leak
  [LogFS] Prevent memory corruption on large deletes
  [LogFS] Remove unused method

Fix trivial conflict with added header includes in fs/logfs/super.c
2010-04-21 12:31:12 -07:00
Joern Engel 1f1b0008e8 [LogFS] Prevent mempool_destroy NULL pointer dereference
It would probably be better to just accept NULL pointers in
mempool_destroy().  But for the current -rc series let's keep things
simple.

This patch was lost in the cracks for a while.
Kevin Cernekee <cernekee@gmail.com> had to rediscover the problem and
send a similar patch because of it. :(

Signed-off-by: Joern Engel <joern@logfs.org>
2010-04-15 08:03:57 +02:00
Tejun Heo 336f5899d2 Merge branch 'master' into export-slabh 2010-04-05 11:37:28 +09:00
Joern Engel e05c378f49 [LogFS] Remove unused method
All callers are long gone.

Signed-off-by: Joern Engel <joern@logfs.org>
2010-03-30 18:25:17 +02:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Joern Engel 723b2ff408 [LogFS] Clear PagePrivate when moving journal
do_logfs_journal_wl_pass() must call freeseg(), thereby clear
PagePrivate on all pages of the current journal segment.

Signed-off-by: Joern Engel <joern@logfs.org>
2010-03-28 18:10:07 +02:00
Joern Engel 81def6b986 Simplify and fix pad_wbuf
A comment in the old code read:
        /* The math in this function can surely use some love */

And indeed it did.  In the case that area->a_used_bytes is exactly
4096 bytes below segment size it fell apart.  pad_wbuf is now split
into two helpers that are significantly less complicated.

Signed-off-by: Joern Engel <joern@logfs.org>
2010-03-28 13:00:08 +02:00
Joern Engel c6d3830140 [LogFS] Only write journal if dirty
This prevents unnecessary journal writes.  More importantly it prevents
an oops due to a journal write on failed mount.
2010-03-04 21:36:19 +01:00
Joern Engel 9421502b4f [LogFS] Fix bdev erases
Erases for block devices were always just emulated by writing 0xff.
Some time back the write was removed and only the page cache was
changed to 0xff.  Superficialy a good idea with two problems:
1. Touching the page cache isn't necessary either.
2. However, writing out 0xff _is_ necessary for the journal.  As the
   journal is scanned linearly, an old non-overwritten commit entry
   can be used on next mount and cause havoc.

This should fix both aspects.
2010-03-04 21:30:58 +01:00
Joern Engel 5db53f3e80 [LogFS] add new flash file system
This is a new flash file system. See
Documentation/filesystems/logfs.txt

Signed-off-by: Joern Engel <joern@logfs.org>
2009-11-20 20:13:39 +01:00