S390 bpf_jit.S is removed in net-next and had changes in 'net',
since that code isn't used any more take the removal.
TLS data structures split the TX and RX components in 'net-next',
put the new struct members from the bug fix in 'net' into the RX
part.
The 'net-next' tree had some reworking of how the ERSPAN code works in
the GRE tunneling code, overlapping with a one-line headroom
calculation fix in 'net'.
Overlapping changes in __sock_map_ctx_update_elem(), keep the bits
that read the prog members via READ_ONCE() into local variables
before using them.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix refcounting bug for connections in on-packet scheduling mode of
IPVS, from Julian Anastasov.
2) Set network header properly in AF_PACKET's packet_snd, from Willem
de Bruijn.
3) Fix regressions in 3c59x by converting to generic DMA API. It was
relying upon the hack that the PCI DMA interfaces would accept NULL
for EISA devices. From Christoph Hellwig.
4) Remove RDMA devices before unregistering netdev in QEDE driver, from
Michal Kalderon.
5) Use after free in TUN driver ptr_ring usage, from Jason Wang.
6) Properly check for missing netlink attributes in SMC_PNETID
requests, from Eric Biggers.
7) Set DMA mask before performaing any DMA operations in vmxnet3
driver, from Regis Duchesne.
8) Fix mlx5 build with SMP=n, from Saeed Mahameed.
9) Classifier fixes in bcm_sf2 driver from Florian Fainelli.
10) Tuntap use after free during release, from Jason Wang.
11) Don't use stack memory in scatterlists in tls code, from Matt
Mullins.
12) Not fully initialized flow key object in ipv4 routing code, from
David Ahern.
13) Various packet headroom bug fixes in ip6_gre driver, from Petr
Machata.
14) Remove queues from XPS maps using correct index, from Amritha
Nambiar.
15) Fix use after free in sock_diag, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (64 commits)
net: ip6_gre: fix tunnel metadata device sharing.
cxgb4: fix offset in collecting TX rate limit info
net: sched: red: avoid hashing NULL child
sock_diag: fix use-after-free read in __sk_free
sh_eth: Change platform check to CONFIG_ARCH_RENESAS
net: dsa: Do not register devlink for unused ports
net: Fix a bug in removing queues from XPS map
bpf: fix truncated jump targets on heavy expansions
bpf: parse and verdict prog attach may race with bpf map update
bpf: sockmap update rollback on error can incorrectly dec prog refcnt
net: test tailroom before appending to linear skb
net: ip6_gre: Fix ip6erspan hlen calculation
net: ip6_gre: Split up ip6gre_changelink()
net: ip6_gre: Split up ip6gre_newlink()
net: ip6_gre: Split up ip6gre_tnl_change()
net: ip6_gre: Split up ip6gre_tnl_link_config()
net: ip6_gre: Fix headroom request in ip6erspan_tunnel_xmit()
net: ip6_gre: Request headroom in __gre6_xmit()
selftests/bpf: check return value of fopen in test_verifier.c
erspan: fix invalid erspan version.
...
Pull UP timer fix from Thomas Gleixner:
"Work around the for_each_cpu() oddity on UP kernels in the tick
broadcast code which causes boot failures because the CPU0 bit is
always reported as set independent of the cpumask content"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/broadcast: Use for_each_cpu() specially on UP kernels
Pull scheduler fixlets from Thomas Gleixner:
"Three trivial fixlets for the scheduler:
- move print_rt_rq() and print_dl_rq() declarations to the right
place
- make grub_reclaim() static
- fix the bogus documentation reference in Kconfig"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix documentation file path
sched/deadline: Make the grub_reclaim() function static
sched/debug: Move the print_rt_rq() and print_dl_rq() declarations to kernel/sched/sched.h
Since the grub_reclaim() function can be made static, make it so.
Silences the following GCC warning (W=1):
kernel/sched/deadline.c:1120:5: warning: no previous prototype for ‘grub_reclaim’ [-Wmissing-prototypes]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180516200902.959-1-malat@debian.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In the following commit:
6b55c9654f ("sched/debug: Move print_cfs_rq() declaration to kernel/sched/sched.h")
the print_cfs_rq() prototype was added to <kernel/sched/sched.h>,
right next to the prototypes for print_cfs_stats(), print_rt_stats()
and print_dl_stats().
Finish this previous commit and also move related prototypes for
print_rt_rq() and print_dl_rq().
Remove existing extern declarations now that they not needed anymore.
Silences the following GCC warning, triggered by W=1:
kernel/sched/debug.c:573:6: warning: no previous prototype for ‘print_rt_rq’ [-Wmissing-prototypes]
kernel/sched/debug.c:603:6: warning: no previous prototype for ‘print_dl_rq’ [-Wmissing-prototypes]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180516195348.30426-1-malat@debian.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Recently during testing, I ran into the following panic:
[ 207.892422] Internal error: Accessing user space memory outside uaccess.h routines: 96000004 [#1] SMP
[ 207.901637] Modules linked in: binfmt_misc [...]
[ 207.966530] CPU: 45 PID: 2256 Comm: test_verifier Tainted: G W 4.17.0-rc3+ #7
[ 207.974956] Hardware name: FOXCONN R2-1221R-A4/C2U4N_MB, BIOS G31FB18A 03/31/2017
[ 207.982428] pstate: 60400005 (nZCv daif +PAN -UAO)
[ 207.987214] pc : bpf_skb_load_helper_8_no_cache+0x34/0xc0
[ 207.992603] lr : 0xffff000000bdb754
[ 207.996080] sp : ffff000013703ca0
[ 207.999384] x29: ffff000013703ca0 x28: 0000000000000001
[ 208.004688] x27: 0000000000000001 x26: 0000000000000000
[ 208.009992] x25: ffff000013703ce0 x24: ffff800fb4afcb00
[ 208.015295] x23: ffff00007d2f5038 x22: ffff00007d2f5000
[ 208.020599] x21: fffffffffeff2a6f x20: 000000000000000a
[ 208.025903] x19: ffff000009578000 x18: 0000000000000a03
[ 208.031206] x17: 0000000000000000 x16: 0000000000000000
[ 208.036510] x15: 0000ffff9de83000 x14: 0000000000000000
[ 208.041813] x13: 0000000000000000 x12: 0000000000000000
[ 208.047116] x11: 0000000000000001 x10: ffff0000089e7f18
[ 208.052419] x9 : fffffffffeff2a6f x8 : 0000000000000000
[ 208.057723] x7 : 000000000000000a x6 : 00280c6160000000
[ 208.063026] x5 : 0000000000000018 x4 : 0000000000007db6
[ 208.068329] x3 : 000000000008647a x2 : 19868179b1484500
[ 208.073632] x1 : 0000000000000000 x0 : ffff000009578c08
[ 208.078938] Process test_verifier (pid: 2256, stack limit = 0x0000000049ca7974)
[ 208.086235] Call trace:
[ 208.088672] bpf_skb_load_helper_8_no_cache+0x34/0xc0
[ 208.093713] 0xffff000000bdb754
[ 208.096845] bpf_test_run+0x78/0xf8
[ 208.100324] bpf_prog_test_run_skb+0x148/0x230
[ 208.104758] sys_bpf+0x314/0x1198
[ 208.108064] el0_svc_naked+0x30/0x34
[ 208.111632] Code: 91302260 f9400001 f9001fa1 d2800001 (29500680)
[ 208.117717] ---[ end trace 263cb8a59b5bf29f ]---
The program itself which caused this had a long jump over the whole
instruction sequence where all of the inner instructions required
heavy expansions into multiple BPF instructions. Additionally, I also
had BPF hardening enabled which requires once more rewrites of all
constant values in order to blind them. Each time we rewrite insns,
bpf_adj_branches() would need to potentially adjust branch targets
which cross the patchlet boundary to accommodate for the additional
delta. Eventually that lead to the case where the target offset could
not fit into insn->off's upper 0x7fff limit anymore where then offset
wraps around becoming negative (in s16 universe), or vice versa
depending on the jump direction.
Therefore it becomes necessary to detect and reject any such occasions
in a generic way for native eBPF and cBPF to eBPF migrations. For
the latter we can simply check bounds in the bpf_convert_filter()'s
BPF_EMIT_JMP helper macro and bail out once we surpass limits. The
bpf_patch_insn_single() for native eBPF (and cBPF to eBPF in case
of subsequent hardening) is a bit more complex in that we need to
detect such truncations before hitting the bpf_prog_realloc(). Thus
the latter is split into an extra pass to probe problematic offsets
on the original program in order to fail early. With that in place
and carefully tested I no longer hit the panic and the rewrites are
rejected properly. The above example panic I've seen on bpf-next,
though the issue itself is generic in that a guard against this issue
in bpf seems more appropriate in this case.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In the sockmap design BPF programs (SK_SKB_STREAM_PARSER,
SK_SKB_STREAM_VERDICT and SK_MSG_VERDICT) are attached to the sockmap
map type and when a sock is added to the map the programs are used by
the socket. However, sockmap updates from both userspace and BPF
programs can happen concurrently with the attach and detach of these
programs.
To resolve this we use the bpf_prog_inc_not_zero and a READ_ONCE()
primitive to ensure the program pointer is not refeched and
possibly NULL'd before the refcnt increment. This happens inside
a RCU critical section so although the pointer reference in the map
object may be NULL (by a concurrent detach operation) the reference
from READ_ONCE will not be free'd until after grace period. This
ensures the object returned by READ_ONCE() is valid through the
RCU criticl section and safe to use as long as we "know" it may
be free'd shortly.
Daniel spotted a case in the sock update API where instead of using
the READ_ONCE() program reference we used the pointer from the
original map, stab->bpf_{verdict|parse|txmsg}. The problem with this
is the logic checks the object returned from the READ_ONCE() is not
NULL and then tries to reference the object again but using the
above map pointer, which may have already been NULL'd by a parallel
detach operation. If this happened bpf_porg_inc_not_zero could
dereference a NULL pointer.
Fix this by using variable returned by READ_ONCE() that is checked
for NULL.
Fixes: 2f857d0460 ("bpf: sockmap, remove STRPARSER map_flags and add multi-map support")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
If the user were to only attach one of the parse or verdict programs
then it is possible a subsequent sockmap update could incorrectly
decrement the refcnt on the program. This happens because in the
rollback logic, after an error, we have to decrement the program
reference count when its been incremented. However, we only increment
the program reference count if the user has both a verdict and a
parse program. The reason for this is because, at least at the
moment, both are required for any one to be meaningful. The problem
fixed here is in the rollback path we decrement the program refcnt
even if only one existing. But we never incremented the refcnt in
the first place creating an imbalance.
This patch fixes the error path to handle this case.
Fixes: 2f857d0460 ("bpf: sockmap, remove STRPARSER map_flags and add multi-map support")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-05-17
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Provide a new BPF helper for doing a FIB and neighbor lookup
in the kernel tables from an XDP or tc BPF program. The helper
provides a fast-path for forwarding packets. The API supports
IPv4, IPv6 and MPLS protocols, but currently IPv4 and IPv6 are
implemented in this initial work, from David (Ahern).
2) Just a tiny diff but huge feature enabled for nfp driver by
extending the BPF offload beyond a pure host processing offload.
Offloaded XDP programs are allowed to set the RX queue index and
thus opening the door for defining a fully programmable RSS/n-tuple
filter replacement. Once BPF decided on a queue already, the device
data-path will skip the conventional RSS processing completely,
from Jakub.
3) The original sockmap implementation was array based similar to
devmap. However unlike devmap where an ifindex has a 1:1 mapping
into the map there are use cases with sockets that need to be
referenced using longer keys. Hence, sockhash map is added reusing
as much of the sockmap code as possible, from John.
4) Introduce BTF ID. The ID is allocatd through an IDR similar as
with BPF maps and progs. It also makes BTF accessible to user
space via BPF_BTF_GET_FD_BY_ID and adds exposure of the BTF data
through BPF_OBJ_GET_INFO_BY_FD, from Martin.
5) Enable BPF stackmap with build_id also in NMI context. Due to the
up_read() of current->mm->mmap_sem build_id cannot be parsed.
This work defers the up_read() via a per-cpu irq_work so that
at least limited support can be enabled, from Song.
6) Various BPF JIT follow-up cleanups and fixups after the LD_ABS/LD_IND
JIT conversion as well as implementation of an optimized 32/64 bit
immediate load in the arm64 JIT that allows to reduce the number of
emitted instructions; in case of tested real-world programs they
were shrinking by three percent, from Daniel.
7) Add ifindex parameter to the libbpf loader in order to enable
BPF offload support. Right now only iproute2 can load offloaded
BPF and this will also enable libbpf for direct integration into
other applications, from David (Beckett).
8) Convert the plain text documentation under Documentation/bpf/ into
RST format since this is the appropriate standard the kernel is
moving to for all documentation. Also add an overview README.rst,
from Jesper.
9) Add __printf verification attribute to the bpf_verifier_vlog()
helper. Though it uses va_list we can still allow gcc to check
the format string, from Mathieu.
10) Fix a bash reference in the BPF selftest's Makefile. The '|& ...'
is a bash 4.0+ feature which is not guaranteed to be available
when calling out to shell, therefore use a more portable variant,
from Joe.
11) Fix a 64 bit division in xdp_umem_reg() by using div_u64()
instead of relying on the gcc built-in, from Björn.
12) Fix a sock hashmap kmalloc warning reported by syzbot when an
overly large key size is used in hashmap then causing overflows
in htab->elem_size. Reject bogus attr->key_size early in the
sock_hash_alloc(), from Yonghong.
13) Ensure in BPF selftests when urandom_read is being linked that
--build-id is always enabled so that test_stacktrace_build_id[_nmi]
won't be failing, from Alexei.
14) Add bitsperlong.h as well as errno.h uapi headers into the tools
header infrastructure which point to one of the arch specific
uapi headers. This was needed in order to fix a build error on
some systems for the BPF selftests, from Sirio.
15) Allow for short options to be used in the xdp_monitor BPF sample
code. And also a bpf.h tools uapi header sync in order to fix a
selftest build failure. Both from Prashant.
16) More formally clarify the meaning of ID in the direct packet access
section of the BPF documentation, from Wang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When an error happens in the update sockmap element logic also pass
the err up to the user.
Fixes: e5cd3abcb3 ("bpf: sockmap, refactor sockmap routines to work with hashmap")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
syzbot reported a kernel warning below:
WARNING: CPU: 0 PID: 4499 at mm/slab_common.c:996 kmalloc_slab+0x56/0x70 mm/slab_common.c:996
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 4499 Comm: syz-executor050 Not tainted 4.17.0-rc3+ #9
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1b9/0x294 lib/dump_stack.c:113
panic+0x22f/0x4de kernel/panic.c:184
__warn.cold.8+0x163/0x1b3 kernel/panic.c:536
report_bug+0x252/0x2d0 lib/bug.c:186
fixup_bug arch/x86/kernel/traps.c:178 [inline]
do_error_trap+0x1de/0x490 arch/x86/kernel/traps.c:296
do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315
invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:992
RIP: 0010:kmalloc_slab+0x56/0x70 mm/slab_common.c:996
RSP: 0018:ffff8801d907fc58 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8801aeecb280 RCX: ffffffff8185ebd7
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000ffffffe1
RBP: ffff8801d907fc58 R08: ffff8801adb5e1c0 R09: ffffed0035a84700
R10: ffffed0035a84700 R11: ffff8801ad423803 R12: ffff8801aeecb280
R13: 00000000fffffff4 R14: ffff8801ad891a00 R15: 00000000014200c0
__do_kmalloc mm/slab.c:3713 [inline]
__kmalloc+0x25/0x760 mm/slab.c:3727
kmalloc include/linux/slab.h:517 [inline]
map_get_next_key+0x24a/0x640 kernel/bpf/syscall.c:858
__do_sys_bpf kernel/bpf/syscall.c:2131 [inline]
__se_sys_bpf kernel/bpf/syscall.c:2096 [inline]
__x64_sys_bpf+0x354/0x4f0 kernel/bpf/syscall.c:2096
do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The test case is against sock hashmap with a key size 0xffffffe1.
Such a large key size will cause the below code in function
sock_hash_alloc() overflowing and produces a smaller elem_size,
hence map creation will be successful.
htab->elem_size = sizeof(struct htab_elem) +
round_up(htab->map.key_size, 8);
Later, when map_get_next_key is called and kernel tries
to allocate the key unsuccessfully, it will issue
the above warning.
Similar to hashtab, ensure the key size is at most
MAX_BPF_STACK for a successful map creation.
Fixes: 8111038444 ("bpf: sockmap, add hash map support")
Reported-by: syzbot+e4566d29080e7f3460ff@syzkaller.appspotmail.com
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The filesystem freezing code needs to transfer ownership of a rwsem
embedded in a percpu-rwsem from the task that does the freezing to
another one that does the thawing by calling percpu_rwsem_release()
after freezing and percpu_rwsem_acquire() before thawing.
However, the new rwsem debug code runs afoul with this scheme by warning
that the task that releases the rwsem isn't the one that acquires it,
as reported by Amir Goldstein:
DEBUG_LOCKS_WARN_ON(sem->owner != get_current())
WARNING: CPU: 1 PID: 1401 at /home/amir/build/src/linux/kernel/locking/rwsem.c:133 up_write+0x59/0x79
Call Trace:
percpu_up_write+0x1f/0x28
thaw_super_locked+0xdf/0x120
do_vfs_ioctl+0x270/0x5f1
ksys_ioctl+0x52/0x71
__x64_sys_ioctl+0x16/0x19
do_syscall_64+0x5d/0x167
entry_SYSCALL_64_after_hwframe+0x49/0xbe
To work properly with the rwsem debug code, we need to annotate that the
rwsem ownership is unknown during the tranfer period until a brave soul
comes forward to acquire the ownership. During that period, optimistic
spinning will be disabled.
Reported-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Theodore Y. Ts'o <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-fsdevel@vger.kernel.org
Link: http://lkml.kernel.org/r/1526420991-21213-3-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are use cases where a rwsem can be acquired by one task, but
released by another task. In thess cases, optimistic spinning may need
to be disabled. One example will be the filesystem freeze/thaw code
where the task that freezes the filesystem will acquire a write lock
on a rwsem and then un-owns it before returning to userspace. Later on,
another task will come along, acquire the ownership, thaw the filesystem
and release the rwsem.
Bit 0 of the owner field was used to designate that it is a reader
owned rwsem. It is now repurposed to mean that the owner of the rwsem
is not known. If only bit 0 is set, the rwsem is reader owned. If bit
0 and other bits are set, it is writer owned with an unknown owner.
One such value for the latter case is (-1L). So we can set owner to 1 for
reader-owned, -1 for writer-owned. The owner is unknown in both cases.
To handle transfer of rwsem ownership, the higher level code should
set the owner field to -1 to indicate a write-locked rwsem with unknown
owner. Optimistic spinning will be disabled in this case.
Once the higher level code figures who the new owner is, it can then
set the owner field accordingly.
Tested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Theodore Y. Ts'o <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-fsdevel@vger.kernel.org
Link: http://lkml.kernel.org/r/1526420991-21213-2-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
for_each_cpu() unintuitively reports CPU0 as set independent of the actual
cpumask content on UP kernels. This causes an unexpected PIT interrupt
storm on a UP kernel running in an SMP virtual machine on Hyper-V, and as
a result, the virtual machine can suffer from a strange random delay of 1~20
minutes during boot-up, and sometimes it can hang forever.
Protect if by checking whether the cpumask is empty before entering the
for_each_cpu() loop.
[ tglx: Use !IS_ENABLED(CONFIG_SMP) instead of #ifdeffery ]
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poulson <jopoulso@microsoft.com>
Cc: "Michael Kelley (EOSG)" <Michael.H.Kelley@microsoft.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: stable@vger.kernel.org
Cc: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Jork Loeser <Jork.Loeser@microsoft.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: KY Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: https://lkml.kernel.org/r/KL1P15301MB000678289FE55BA365B3279ABF990@KL1P15301MB0006.APCP153.PROD.OUTLOOK.COM
Link: https://lkml.kernel.org/r/KL1P15301MB0006FA63BC22BEB64902EAA0BF930@KL1P15301MB0006.APCP153.PROD.OUTLOOK.COM
Sockmap is currently backed by an array and enforces keys to be
four bytes. This works well for many use cases and was originally
modeled after devmap which also uses four bytes keys. However,
this has become limiting in larger use cases where a hash would
be more appropriate. For example users may want to use the 5-tuple
of the socket as the lookup key.
To support this add hash support.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch only refactors the existing sockmap code. This will allow
much of the psock initialization code path and bpf helper codes to
work for both sockmap bpf map types that are backed by an array, the
currently supported type, and the new hash backed bpf map type
sockhash.
Most the fallout comes from three changes,
- Pushing bpf programs into an independent structure so we
can use it from the htab struct in the next patch.
- Generalizing helpers to use void *key instead of the hardcoded
u32.
- Instead of passing map/key through the metadata we now do
the lookup inline. This avoids storing the key in the metadata
which will be useful when keys can be longer than 4 bytes. We
rename the sk pointers to sk_redir at this point as well to
avoid any confusion between the current sk pointer and the
redirect pointer sk_redir.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, we cannot parse build_id in nmi context because of
up_read(¤t->mm->mmap_sem), this makes stackmap with build_id
less useful. This patch enables parsing build_id in nmi by putting
the up_read() call in irq_work. To avoid memory allocation in nmi
context, we use per cpu variable for the irq_work. As a result, only
one irq_work per cpu is allowed. If the irq_work is in-use, we
fallback to only report ips.
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull x86/pti updates from Thomas Gleixner:
"A mixed bag of fixes and updates for the ghosts which are hunting us.
The scheduler fixes have been pulled into that branch to avoid
conflicts.
- A set of fixes to address a khread_parkme() race which caused lost
wakeups and loss of state.
- A deadlock fix for stop_machine() solved by moving the wakeups
outside of the stopper_lock held region.
- A set of Spectre V1 array access restrictions. The possible
problematic spots were discuvered by Dan Carpenters new checks in
smatch.
- Removal of an unused file which was forgotten when the rest of that
functionality was removed"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Remove unused file
perf/x86/cstate: Fix possible Spectre-v1 indexing for pkg_msr
perf/x86/msr: Fix possible Spectre-v1 indexing in the MSR driver
perf/x86: Fix possible Spectre-v1 indexing for x86_pmu::event_map()
perf/x86: Fix possible Spectre-v1 indexing for hw_perf_event cache_*
perf/core: Fix possible Spectre-v1 indexing for ->aux_pages[]
sched/autogroup: Fix possible Spectre-v1 indexing for sched_prio_to_weight[]
sched/core: Fix possible Spectre-v1 indexing for sched_prio_to_weight[]
sched/core: Introduce set_special_state()
kthread, sched/wait: Fix kthread_parkme() completion issue
kthread, sched/wait: Fix kthread_parkme() wait-loop
sched/fair: Fix the update of blocked load when newly idle
stop_machine, sched: Fix migrate_swap() vs. active_balance() deadlock
Pull scheduler fix from Thomas Gleixner:
"Revert the new NUMA aware placement approach which turned out to
create more problems than it solved"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "sched/numa: Delay retrying placement for automatic NUMA balance after wake_affine()"
This reverts commit 7347fc87df.
Srikar Dronamra pointed out that while the commit in question did show
a performance improvement on ppc64, it did so at the cost of disabling
active CPU migration by automatic NUMA balancing which was not the intent.
The issue was that a serious flaw in the logic failed to ever active balance
if SD_WAKE_AFFINE was disabled on scheduler domains. Even when it's enabled,
the logic is still bizarre and against the original intent.
Investigation showed that fixing the patch in either the way he suggested,
using the correct comparison for jiffies values or introducing a new
numa_migrate_deferred variable in task_struct all perform similarly to a
revert with a mix of gains and losses depending on the workload, machine
and socket count.
The original intent of the commit was to handle a problem whereby
wake_affine, idle balancing and automatic NUMA balancing disagree on the
appropriate placement for a task. This was particularly true for cases where
a single task was a massive waker of tasks but where wake_wide logic did
not apply. This was particularly noticeable when a futex (a barrier) woke
all worker threads and tried pulling the wakees to the waker nodes. In that
specific case, it could be handled by tuning MPI or openMP appropriately,
but the behavior is not illogical and was worth attempting to fix. However,
the approach was wrong. Given that we're at rc4 and a fix is not obvious,
it's better to play safe, revert this commit and retry later.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: efault@gmx.de
Cc: ggherdovich@suse.cz
Cc: hpa@zytor.com
Cc: matt@codeblueprint.co.uk
Cc: mpe@ellerman.id.au
Link: http://lkml.kernel.org/r/20180509163115.6fnnyeg4vdm2ct4v@techsingularity.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge misc fixes from Andrew Morton:
"13 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
rbtree: include rcu.h
scripts/faddr2line: fix error when addr2line output contains discriminator
ocfs2: take inode cluster lock before moving reflinked inode from orphan dir
mm, oom: fix concurrent munlock and oom reaper unmap, v3
mm: migrate: fix double call of radix_tree_replace_slot()
proc/kcore: don't bounds check against address 0
mm: don't show nr_indirectly_reclaimable in /proc/vmstat
mm: sections are not offlined during memory hotremove
z3fold: fix reclaim lock-ups
init: fix false positives in W+X checking
lib/find_bit_benchmark.c: avoid soft lockup in test_find_first_bit()
KASAN: prohibit KASAN+STRUCTLEAK combination
MAINTAINERS: update Shuah's email address
The bpf syscall and selftests conflicts were trivial
overlapping changes.
The r8169 change involved moving the added mdelay from 'net' into a
different function.
A TLS close bug fix overlapped with the splitting of the TLS state
into separate TX and RX parts. I just expanded the tests in the bug
fix from "ctx->conf == X" into "ctx->tx_conf == X && ctx->rx_conf
== X".
Signed-off-by: David S. Miller <davem@davemloft.net>
load_module() creates W+X mappings via __vmalloc_node_range() (from
layout_and_allocate()->move_module()->module_alloc()) by using
PAGE_KERNEL_EXEC. These mappings are later cleaned up via
"call_rcu_sched(&freeinit->rcu, do_free_init)" from do_init_module().
This is a problem because call_rcu_sched() queues work, which can be run
after debug_checkwx() is run, resulting in a race condition. If hit,
the race results in a nasty splat about insecure W+X mappings, which
results in a poor user experience as these are not the mappings that
debug_checkwx() is intended to catch.
This issue is observed on multiple arm64 platforms, and has been
artificially triggered on an x86 platform.
Address the race by flushing the queued work before running the
arch-defined mark_rodata_ro() which then calls debug_checkwx().
Link: http://lkml.kernel.org/r/1525103946-29526-1-git-send-email-jhugo@codeaurora.org
Fixes: e1a58320a3 ("x86/mm: Warn on W^X mappings")
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reported-by: Timur Tabi <timur@codeaurora.org>
Reported-by: Jan Glauber <jan.glauber@caviumnetworks.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking fixes from David Miller:
1) Verify lengths of keys provided by the user is AF_KEY, from Kevin
Easton.
2) Add device ID for BCM89610 PHY. Thanks to Bhadram Varka.
3) Add Spectre guards to some ATM code, courtesy of Gustavo A. R.
Silva.
4) Fix infinite loop in NSH protocol code. To Eric Dumazet we are most
grateful for this fix.
5) Line up /proc/net/netlink headers properly. This fix from YU Bo, we
do appreciate.
6) Use after free in TLS code. Once again we are blessed by the
honorable Eric Dumazet with this fix.
7) Fix regression in TLS code causing stalls on partial TLS records.
This fix is bestowed upon us by Andrew Tomt.
8) Deal with too small MTUs properly in LLC code, another great gift
from Eric Dumazet.
9) Handle cached route flushing properly wrt. MTU locking in ipv4, to
Hangbin Liu we give thanks for this.
10) Fix regression in SO_BINDTODEVIC handling wrt. UDP socket demux.
Paolo Abeni, he gave us this.
11) Range check coalescing parameters in mlx4 driver, thank you Moshe
Shemesh.
12) Some ipv6 ICMP error handling fixes in rxrpc, from our good brother
David Howells.
13) Fix kexec on mlx5 by freeing IRQs in shutdown path. Daniel Juergens,
you're the best!
14) Don't send bonding RLB updates to invalid MAC addresses. Debabrata
Benerjee saved us!
15) Uh oh, we were leaking in udp_sendmsg and ping_v4_sendmsg. The ship
is now water tight, thanks to Andrey Ignatov.
16) IPSEC memory leak in ixgbe from Colin Ian King, man we've got holes
everywhere!
17) Fix error path in tcf_proto_create, Jiri Pirko what would we do
without you!
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (92 commits)
net sched actions: fix refcnt leak in skbmod
net: sched: fix error path in tcf_proto_create() when modules are not configured
net sched actions: fix invalid pointer dereferencing if skbedit flags missing
ixgbe: fix memory leak on ipsec allocation
ixgbevf: fix ixgbevf_xmit_frame()'s return type
ixgbe: return error on unsupported SFP module when resetting
ice: Set rq_last_status when cleaning rq
ipv4: fix memory leaks in udp_sendmsg, ping_v4_sendmsg
mlxsw: core: Fix an error handling path in 'mlxsw_core_bus_device_register()'
bonding: send learning packets for vlans on slave
bonding: do not allow rlb updates to invalid mac
net/mlx5e: Err if asked to offload TC match on frag being first
net/mlx5: E-Switch, Include VF RDMA stats in vport statistics
net/mlx5: Free IRQs in shutdown path
rxrpc: Trace UDP transmission failure
rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages
rxrpc: Fix the min security level for kernel calls
rxrpc: Fix error reception on AF_INET6 sockets
rxrpc: Fix missing start of call timeout
qed: fix spelling mistake: "taskelt" -> "tasklet"
...
regex_match_front() test was updated to be limited to the size
of the pattern instead of the full test string. But as the test string
is not guaranteed to be nul terminated, it still needs to consider
the size of the test string.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWvWzNRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhiPAP9bmOzqT3YK+dF19pLJCrmjyF95Wh85
/10xaH3G1Q5e8AEA3ZXQqVNEGnaEs2uO/c5yvTP6/k1WEfGuTqTO5IH2hwI=
=cKB5
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Working on some new updates to trace filtering, I noticed that the
regex_match_front() test was updated to be limited to the size of the
pattern instead of the full test string.
But as the test string is not guaranteed to be nul terminated, it
still needs to consider the size of the test string"
* tag 'trace-v4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix regex_match_front() to not over compare the test string
- Restore device_may_wakeup() check in pci_enable_wake() removed
inadvertently during the 4.13 cycle to prevent systems from
drawing excessive power when suspended or off, among other
things (Rafael Wysocki).
- Fix pci_dev_run_wake() to properly handle devices that only can
signal PME# when in the D3cold power state (Kai Heng Feng).
- Fix the schedutil cpufreq governor to avoid using UINT_MAX
as the new CPU frequency in some cases due to a missing check
(Rafael Wysocki).
- Remove a stale comment regarding worker kthreads from the
schedutil cpufreq governor (Juri Lelli).
- Fix a copy-paste mistake in the intel_pstate driver documentation
(Juri Lelli).
- Fix a typo in the system sleep states documentation (Jonathan
Neuschäfer).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=bCt1
-----END PGP SIGNATURE-----
Merge tag 'pm-4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two PCI power management regressions from the 4.13 cycle and
one cpufreq schedutil governor bug introduced during the 4.12 cycle,
drop a stale comment from the schedutil code and fix two mistakes in
docs.
Specifics:
- Restore device_may_wakeup() check in pci_enable_wake() removed
inadvertently during the 4.13 cycle to prevent systems from drawing
excessive power when suspended or off, among other things (Rafael
Wysocki).
- Fix pci_dev_run_wake() to properly handle devices that only can
signal PME# when in the D3cold power state (Kai Heng Feng).
- Fix the schedutil cpufreq governor to avoid using UINT_MAX as the
new CPU frequency in some cases due to a missing check (Rafael
Wysocki).
- Remove a stale comment regarding worker kthreads from the schedutil
cpufreq governor (Juri Lelli).
- Fix a copy-paste mistake in the intel_pstate driver documentation
(Juri Lelli).
- Fix a typo in the system sleep states documentation (Jonathan
Neuschäfer)"
* tag 'pm-4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PCI / PM: Check device_may_wakeup() in pci_enable_wake()
PCI / PM: Always check PME wakeup capability for runtime wakeup support
cpufreq: schedutil: Avoid using invalid next_freq
cpufreq: schedutil: remove stale comment
PM: docs: intel_pstate: fix Active Mode w/o HWP paragraph
PM: docs: sleep-states: Fix a typo ("includig")
The regex match function regex_match_front() in the tracing filter logic,
was fixed to test just the pattern length from testing the entire test
string. That is, it went from strncmp(str, r->pattern, len) to
strcmp(str, r->pattern, r->len).
The issue is that str is not guaranteed to be nul terminated, and if r->len
is greater than the length of str, it can access more memory than is
allocated.
The solution is to add a simple test if (len < r->len) return 0.
Cc: stable@vger.kernel.org
Fixes: 285caad415 ("tracing/filters: Fix MATCH_FRONT_ONLY filter matching")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit 3a4d44b616 ("ntp: Move adjtimex related compat syscalls to
native counterparts") removed the memset() in compat_get_timex(). Since
then, the compat adjtimex syscall can invoke do_adjtimex() with an
uninitialized ->tai.
If do_adjtimex() doesn't write to ->tai (e.g. because the arguments are
invalid), compat_put_timex() then copies the uninitialized ->tai field
to userspace.
Fix it by adding the memset() back.
Fixes: 3a4d44b616 ("ntp: Move adjtimex related compat syscalls to native counterparts")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's fairly easy for offloaded XDP programs to select the RX queue
packets go to. We need a way of expressing this in the software.
Allow write to the rx_queue_index field of struct xdp_md for
device-bound programs.
Skip convert_ctx_access callback entirely for offloads.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
During BPF_OBJ_GET_INFO_BY_FD on a btf_fd, the current bpf_attr's
info.info is directly filled with the BTF binary data. It is
not extensible. In this case, we want to add BTF ID.
This patch adds "struct bpf_btf_info" which has the BTF ID as
one of its member. The BTF binary data itself is exposed through
the "btf" and "btf_size" members.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch gives an ID to each loaded BTF. The ID is allocated by
the idr like the existing prog-id and map-id.
The bpf_put(map->btf) is moved to __bpf_map_put() so that the
userspace can stop seeing the BTF ID ASAP when the last BTF
refcnt is gone.
It also makes BTF accessible from userspace through the
1. new BPF_BTF_GET_FD_BY_ID command. It is limited to CAP_SYS_ADMIN
which is inline with the BPF_BTF_LOAD cmd and the existing
BPF_[MAP|PROG]_GET_FD_BY_ID cmd.
2. new btf_id (and btf_key_id + btf_value_id) in "struct bpf_map_info"
Once the BTF ID handler is accessible from userspace, freeing a BTF
object has to go through a rcu period. The BPF_BTF_GET_FD_BY_ID cmd
can then be done under a rcu_read_lock() instead of taking
spin_lock.
[Note: A similar rcu usage can be done to the existing
bpf_prog_get_fd_by_id() in a follow up patch]
When processing the BPF_BTF_GET_FD_BY_ID cmd,
refcount_inc_not_zero() is needed because the BTF object
could be already in the rcu dead row . btf_get() is
removed since its usage is currently limited to btf.c
alone. refcount_inc() is used directly instead.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
If CONFIG_REFCOUNT_FULL=y, refcount_inc() WARN when refcount is 0.
When creating a new btf, the initial btf->refcnt is 0 and
triggered the following:
[ 34.855452] refcount_t: increment on 0; use-after-free.
[ 34.856252] WARNING: CPU: 6 PID: 1857 at lib/refcount.c:153 refcount_inc+0x26/0x30
....
[ 34.868809] Call Trace:
[ 34.869168] btf_new_fd+0x1af6/0x24d0
[ 34.869645] ? btf_type_seq_show+0x200/0x200
[ 34.870212] ? lock_acquire+0x3b0/0x3b0
[ 34.870726] ? security_capable+0x54/0x90
[ 34.871247] __x64_sys_bpf+0x1b2/0x310
[ 34.871761] ? __ia32_sys_bpf+0x310/0x310
[ 34.872285] ? bad_area_access_error+0x310/0x310
[ 34.872894] do_syscall_64+0x95/0x3f0
This patch uses refcount_set() instead.
Reported-by: Yonghong Song <yhs@fb.com>
Tested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
If the next_freq field of struct sugov_policy is set to UINT_MAX,
it shouldn't be used for updating the CPU frequency (this is a
special "invalid" value), but after commit b7eaf1aab9 (cpufreq:
schedutil: Avoid reducing frequency of busy CPUs prematurely) it
may be passed as the new frequency to sugov_update_commit() in
sugov_update_single().
Fix that by adding an extra check for the special UINT_MAX value
of next_freq to sugov_update_single().
Fixes: b7eaf1aab9 (cpufreq: schedutil: Avoid reducing frequency of busy CPUs prematurely)
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.12+ <stable@vger.kernel.org> # 4.12+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After commit 794a56ebd9 (sched/cpufreq: Change the worker kthread to
SCHED_DEADLINE) schedutil kthreads are "ignored" for a clock frequency
selection point of view, so the potential corner case for RT tasks is not
possible at all now.
Remove the stale comment mentioning it.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Minor conflict, a CHECK was placed into an if() statement
in net-next, whilst a newline was added to that CHECK
call in 'net'. Thanks to Daniel for the merge resolution.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull clocksource fixes from Thomas Gleixner:
"The recent addition of the early TSC clocksource breaks on machines
which have an unstable TSC because in case that TSC is disabled, then
the clocksource selection logic falls back to the early TSC which is
obviously bogus.
That also unearthed a few robustness issues in the clocksource
derating code which are addressed as well"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Rework stale comment
clocksource: Consistent de-rate when marking unstable
x86/tsc: Fix mark_tsc_unstable()
clocksource: Initialize cs->wd_list
clocksource: Allow clocksource_mark_unstable() on unregistered clocksources
x86/tsc: Always unregister clocksource_tsc_early
when they are writable by root. To fix the confusion, they should
be 0644. Note, either case root can still write to them.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWuyBchQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmDLAQDyddL4DS480WXv3t3I/ZPwjHVuI4qS
cPUsAsjn3Xs9wAD+O6/rE8SL/Q2tUIWlWk9wC4YpGqEoR6R3x98qpnGP3gA=
=L/Kw
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Some of the files in the tracing directory show file mode 0444 when
they are writable by root. To fix the confusion, they should be 0644.
Note, either case root can still write to them.
Zhengyuan asked why I never applied that patch (the first one is from
2014!). I simply forgot about it. /me lowers head in shame"
* tag 'trace-v4.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix the file mode of stack tracer
ftrace: Have set_graph_* files have normal file modes
> kernel/sched/core.c:6921 cpu_weight_nice_write_s64() warn: potential spectre issue 'sched_prio_to_weight'
Userspace controls @nice, so sanitize the value before using it to
index an array.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2018-05-05
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Sanitize attr->{prog,map}_type from bpf(2) since used as an array index
to retrieve prog/map specific ops such that we prevent potential out of
bounds value under speculation, from Mark and Daniel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If bpf_map_precharge_memlock() did not fail, then we set err to zero.
However, any subsequent failure from either alloc_percpu() or the
bpf_map_area_alloc() will return ERR_PTR(0) which in find_and_alloc_map()
will cause NULL pointer deref.
In devmap we have the convention that we return -EINVAL on page count
overflow, so keep the same logic here and just set err to -ENOMEM
after successful bpf_map_precharge_memlock().
Fixes: fbfc504a24 ("bpf: introduce new bpf AF_XDP map type BPF_MAP_TYPE_XSKMAP")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Björn Töpel <bjorn.topel@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Comments in the verifier refer to free_bpf_prog_info() which
seems to have never existed in tree. Replace it with
free_used_maps().
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Offloads may find host map pointers more useful than map fds.
Map pointers can be used to identify the map, while fds are
only valid within the context of loading process.
Jump to skip_full_check on error in case verifier log overflow
has to be handled (replace_map_fd_with_map_ptr() prints to the
log, driver prep may do that too in the future).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bpf_event_output() is useful for offloads to add events to BPF
event rings, export it. Note that export is placed near the stub
since tracing is optional and kernel/bpf/core.c is always going
to be built.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
For asynchronous events originating from the device, like perf event
output, we need to be able to make sure that objects being referred
to by the FW message are valid on the host. FW events can get queued
and reordered. Even if we had a FW message "barrier" we should still
protect ourselves from bogus FW output.
Add a reverse-mapping hash table and record in it all raw map pointers
FW may refer to. Only record neutral maps, i.e. perf event arrays.
These are currently the only objects FW can refer to. Use RCU protection
on the read side, update side is under RTNL.
Since program vs map destruction order is slightly painful for offload
simply take an extra reference on all the recorded maps to make sure
they don't disappear.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
BPF_MAP_TYPE_PERF_EVENT_ARRAY is special as far as offload goes.
The map only holds glue to perf ring, not actual data. Allow
non-offloaded perf event arrays to be used in offloaded programs.
Offload driver can extract the events from HW and put them in
the map for user space to retrieve.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There are quite a few code snippet like the following in verifier:
subprog_start = 0;
if (env->subprog_cnt == cur_subprog + 1)
subprog_end = insn_cnt;
else
subprog_end = env->subprog_info[cur_subprog + 1].start;
The reason is there is no marker in subprog_info array to tell the end of
it.
We could resolve this issue by introducing a faked "ending" subprog.
The special "ending" subprog is with "insn_cnt" as start offset, so it is
serving as the end mark whenever we iterate over all subprogs.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
David S. Miller
Linus Torvalds
Mathieu Malaterre
Daniel Borkmann
John Fastabend
Yonghong Song
Waiman Long
Dexuan Cui
Song Liu
Mel Gorman
Jeffrey Hugo
Steven Rostedt (VMware)
Jann Horn
Jakub Kicinski
Martin KaFai Lau
Rafael J. Wysocki
Juri Lelli
Peter Zijlstra
Jiong Wang