Граф коммитов

52 Коммитов

Автор SHA1 Сообщение Дата
Masami Hiramatsu 8767ba2796 kmod: fix resource leak in call_usermodehelper_pipe()
Fix resource (write-pipe file) leak in call_usermodehelper_pipe().

When call_usermodehelper_exec() fails, write-pipe file is opened and
call_usermodehelper_pipe() just returns an error.  Since it is hard for
caller to determine whether the error occured when opening the pipe or
executing the helper, the caller cannot close the pipe by themselves.

I've found this resoruce leak when testing coredump.  You can check how
the resource leaks as below;

$ echo "|nocommand" > /proc/sys/kernel/core_pattern
$ ulimit -c unlimited
$ while [ 1 ]; do ./segv; done &> /dev/null &
$ cat /proc/meminfo (<- repeat it)

where segv.c is;
//-----
int main () {
        char *p = 0;
        *p = 1;
}
//-----

This patch closes write-pipe file if call_usermodehelper_exec() failed.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11 09:34:04 -08:00
Eric Paris dd8dbf2e68 security: report the module name to security_module_request
For SELinux to do better filtering in userspace we send the name of the
module along with the AVC denial when a program is denied module_request.

Example output:

type=SYSCALL msg=audit(11/03/2009 10:59:43.510:9) : arch=x86_64 syscall=write success=yes exit=2 a0=3 a1=7fc28c0d56c0 a2=2 a3=7fffca0d7440 items=0 ppid=1727 pid=1729 auid=unset uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=(none) ses=unset comm=rpc.nfsd exe=/usr/sbin/rpc.nfsd subj=system_u:system_r:nfsd_t:s0 key=(null)
type=AVC msg=audit(11/03/2009 10:59:43.510:9) : avc:  denied  { module_request } for  pid=1729 comm=rpc.nfsd kmod="net-pf-10" scontext=system_u:system_r:nfsd_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-11-10 09:33:46 +11:00
Linus Torvalds 483e3cd6a3 Merge branch 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (105 commits)
  ring-buffer: only enable ring_buffer_swap_cpu when needed
  ring-buffer: check for swapped buffers in start of committing
  tracing: report error in trace if we fail to swap latency buffer
  tracing: add trace_array_printk for internal tracers to use
  tracing: pass around ring buffer instead of tracer
  tracing: make tracing_reset safe for external use
  tracing: use timestamp to determine start of latency traces
  tracing: Remove mentioning of legacy latency_trace file from documentation
  tracing/filters: Defer pred allocation, fix memory leak
  tracing: remove users of tracing_reset
  tracing: disable buffers and synchronize_sched before resetting
  tracing: disable update max tracer while reading trace
  tracing: print out start and stop in latency traces
  ring-buffer: disable all cpu buffers when one finds a problem
  ring-buffer: do not count discarded events
  ring-buffer: remove ring_buffer_event_discard
  ring-buffer: fix ring_buffer_read crossing pages
  ring-buffer: remove unnecessary cpu_relax
  ring-buffer: do not swap buffers during a commit
  ring-buffer: do not reset while in a commit
  ...
2009-09-11 13:24:03 -07:00
David Howells e0e817392b CRED: Add some configurable debugging [try #6]
Add a config option (CONFIG_DEBUG_CREDENTIALS) to turn on some debug checking
for credential management.  The additional code keeps track of the number of
pointers from task_structs to any given cred struct, and checks to see that
this number never exceeds the usage count of the cred struct (which includes
all references, not just those from task_structs).

Furthermore, if SELinux is enabled, the code also checks that the security
pointer in the cred struct is never seen to be invalid.

This attempts to catch the bug whereby inode_has_perm() faults in an nfsd
kernel thread on seeing cred->security be a NULL pointer (it appears that the
credential struct has been previously released):

	http://www.kerneloops.org/oops.php?number=252883

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 21:29:01 +10:00
Li Zefan 7ead8b8313 tracing/events: Add module tracepoints
Add trace points to trace module_load, module_free, module_get,
module_put and module_request, and use trace_event facility to
get the trace output.

Here's the sample output:

     TASK-PID    CPU#    TIMESTAMP  FUNCTION
        | |       |          |         |
    <...>-42    [000]     1.758380: module_request: fb0 wait=1 call_site=fb_open
    ...
    <...>-60    [000]     3.269403: module_load: scsi_wait_scan
    <...>-60    [000]     3.269432: module_put: scsi_wait_scan call_site=sys_init_module refcnt=0
    <...>-61    [001]     3.273168: module_free: scsi_wait_scan
    ...
    <...>-1021  [000]    13.836081: module_load: sunrpc
    <...>-1021  [000]    13.840589: module_put: sunrpc call_site=sys_init_module refcnt=-1
    <...>-1027  [000]    13.848098: module_get: sunrpc call_site=try_module_get refcnt=0
    <...>-1027  [000]    13.848308: module_get: sunrpc call_site=get_filesystem refcnt=1
    <...>-1027  [000]    13.848692: module_put: sunrpc call_site=put_filesystem refcnt=0
    ...
 modprobe-2587  [001]  1088.437213: module_load: trace_events_sample F
 modprobe-2587  [001]  1088.437786: module_put: trace_events_sample call_site=sys_init_module refcnt=0

Note:

- the taints flag can be 'F', 'C' and/or 'P' if mod->taints != 0

- the module refcnt is percpu, so it can be negative in a
  specific cpu

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <4A891B3C.5030608@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 11:25:08 +02:00
Eric Paris 9188499cdb security: introducing security_request_module
Calling request_module() will trigger a userspace upcall which will load a
new module into the kernel.  This can be a dangerous event if the process
able to trigger request_module() is able to control either the modprobe
binary or the module binary.  This patch adds a new security hook to
request_module() which can be used by an LSM to control a processes ability
to call request_module().

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-08-14 11:18:37 +10:00
Alexey Dobriyan b43f3cbd21 headers: mnt_namespace.h redux
Fix various silly problems wrt mnt_namespace.h:

 - exit_mnt_ns() isn't used, remove it
 - done that, sched.h and nsproxy.h inclusions aren't needed
 - mount.h inclusion was need for vfsmount_lock, but no longer
 - remove mnt_namespace.h inclusion from files which don't use anything
   from mnt_namespace.h

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-08 09:31:56 -07:00
Tetsuo Handa ab2b7ebaad kmod: Release sub_info on cred allocation failure.
call_usermodehelper_setup() forgot to kfree(sub_info)
when prepare_usermodehelper_creds() failed.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-26 12:11:19 -07:00
Arjan van de Ven acae051565 module: create a request_module_nowait()
There seems to be a common pattern in the kernel where drivers want to
call request_module() from inside a module_init() function. Currently
this would deadlock.

As a result, several drivers go through hoops like scheduling things via
kevent, or creating custom work queues (because kevent can deadlock on them).

This patch changes this to use a request_module_nowait() function macro instead,
which just fires the modprobe off but doesn't wait for it, and thus avoids the
original deadlock entirely.

On my laptop this already results in one less kernel thread running..

(Includes Jiri's patch to use enum umh_wait)

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (bool-ified)
Cc: Jiri Slaby <jirislaby@gmail.com>
2009-03-31 13:05:35 +10:30
Rusty Russell 1a2142afa5 cpumask: remove dangerous CPU_MASK_ALL_PTR, &CPU_MASK_ALL
Impact: cleanup

(Thanks to Al Viro for reminding me of this, via Ingo)

CPU_MASK_ALL is the (deprecated) "all bits set" cpumask, defined as so:

	#define CPU_MASK_ALL (cpumask_t) { { ... } }

Taking the address of such a temporary is questionable at best,
unfortunately 321a8e9d (cpumask: add CPU_MASK_ALL_PTR macro) added
CPU_MASK_ALL_PTR:

	#define CPU_MASK_ALL_PTR (&CPU_MASK_ALL)

Which formalizes this practice.  One day gcc could bite us over this
usage (though we seem to have gotten away with it so far).

So replace everywhere which used &CPU_MASK_ALL or CPU_MASK_ALL_PTR
with the modern "cpu_all_mask" (a real const struct cpumask *).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mike Travis <travis@sgi.com>
2009-03-30 22:05:11 +10:30
Randy Dunlap bd4207c901 kmod: fix varargs kernel-doc
Fix varargs kernel-doc format in kmod.c:
Use @... instead of @varargs.

Warning(kernel/kmod.c:67): Excess function parameter or struct member 'varargs' description in 'request_module'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:27 -08:00
David Howells d84f4f992c CRED: Inaugurate COW credentials
Inaugurate copy-on-write credentials management.  This uses RCU to manage the
credentials pointer in the task_struct with respect to accesses by other tasks.
A process may only modify its own credentials, and so does not need locking to
access or modify its own credentials.

A mutex (cred_replace_mutex) is added to the task_struct to control the effect
of PTRACE_ATTACHED on credential calculations, particularly with respect to
execve().

With this patch, the contents of an active credentials struct may not be
changed directly; rather a new set of credentials must be prepared, modified
and committed using something like the following sequence of events:

	struct cred *new = prepare_creds();
	int ret = blah(new);
	if (ret < 0) {
		abort_creds(new);
		return ret;
	}
	return commit_creds(new);

There are some exceptions to this rule: the keyrings pointed to by the active
credentials may be instantiated - keyrings violate the COW rule as managing
COW keyrings is tricky, given that it is possible for a task to directly alter
the keys in a keyring in use by another task.

To help enforce this, various pointers to sets of credentials, such as those in
the task_struct, are declared const.  The purpose of this is compile-time
discouragement of altering credentials through those pointers.  Once a set of
credentials has been made public through one of these pointers, it may not be
modified, except under special circumstances:

  (1) Its reference count may incremented and decremented.

  (2) The keyrings to which it points may be modified, but not replaced.

The only safe way to modify anything else is to create a replacement and commit
using the functions described in Documentation/credentials.txt (which will be
added by a later patch).

This patch and the preceding patches have been tested with the LTP SELinux
testsuite.

This patch makes several logical sets of alteration:

 (1) execve().

     This now prepares and commits credentials in various places in the
     security code rather than altering the current creds directly.

 (2) Temporary credential overrides.

     do_coredump() and sys_faccessat() now prepare their own credentials and
     temporarily override the ones currently on the acting thread, whilst
     preventing interference from other threads by holding cred_replace_mutex
     on the thread being dumped.

     This will be replaced in a future patch by something that hands down the
     credentials directly to the functions being called, rather than altering
     the task's objective credentials.

 (3) LSM interface.

     A number of functions have been changed, added or removed:

     (*) security_capset_check(), ->capset_check()
     (*) security_capset_set(), ->capset_set()

     	 Removed in favour of security_capset().

     (*) security_capset(), ->capset()

     	 New.  This is passed a pointer to the new creds, a pointer to the old
     	 creds and the proposed capability sets.  It should fill in the new
     	 creds or return an error.  All pointers, barring the pointer to the
     	 new creds, are now const.

     (*) security_bprm_apply_creds(), ->bprm_apply_creds()

     	 Changed; now returns a value, which will cause the process to be
     	 killed if it's an error.

     (*) security_task_alloc(), ->task_alloc_security()

     	 Removed in favour of security_prepare_creds().

     (*) security_cred_free(), ->cred_free()

     	 New.  Free security data attached to cred->security.

     (*) security_prepare_creds(), ->cred_prepare()

     	 New. Duplicate any security data attached to cred->security.

     (*) security_commit_creds(), ->cred_commit()

     	 New. Apply any security effects for the upcoming installation of new
     	 security by commit_creds().

     (*) security_task_post_setuid(), ->task_post_setuid()

     	 Removed in favour of security_task_fix_setuid().

     (*) security_task_fix_setuid(), ->task_fix_setuid()

     	 Fix up the proposed new credentials for setuid().  This is used by
     	 cap_set_fix_setuid() to implicitly adjust capabilities in line with
     	 setuid() changes.  Changes are made to the new credentials, rather
     	 than the task itself as in security_task_post_setuid().

     (*) security_task_reparent_to_init(), ->task_reparent_to_init()

     	 Removed.  Instead the task being reparented to init is referred
     	 directly to init's credentials.

	 NOTE!  This results in the loss of some state: SELinux's osid no
	 longer records the sid of the thread that forked it.

     (*) security_key_alloc(), ->key_alloc()
     (*) security_key_permission(), ->key_permission()

     	 Changed.  These now take cred pointers rather than task pointers to
     	 refer to the security context.

 (4) sys_capset().

     This has been simplified and uses less locking.  The LSM functions it
     calls have been merged.

 (5) reparent_to_kthreadd().

     This gives the current thread the same credentials as init by simply using
     commit_thread() to point that way.

 (6) __sigqueue_alloc() and switch_uid()

     __sigqueue_alloc() can't stop the target task from changing its creds
     beneath it, so this function gets a reference to the currently applicable
     user_struct which it then passes into the sigqueue struct it returns if
     successful.

     switch_uid() is now called from commit_creds(), and possibly should be
     folded into that.  commit_creds() should take care of protecting
     __sigqueue_alloc().

 (7) [sg]et[ug]id() and co and [sg]et_current_groups.

     The set functions now all use prepare_creds(), commit_creds() and
     abort_creds() to build and check a new set of credentials before applying
     it.

     security_task_set[ug]id() is called inside the prepared section.  This
     guarantees that nothing else will affect the creds until we've finished.

     The calling of set_dumpable() has been moved into commit_creds().

     Much of the functionality of set_user() has been moved into
     commit_creds().

     The get functions all simply access the data directly.

 (8) security_task_prctl() and cap_task_prctl().

     security_task_prctl() has been modified to return -ENOSYS if it doesn't
     want to handle a function, or otherwise return the return value directly
     rather than through an argument.

     Additionally, cap_task_prctl() now prepares a new set of credentials, even
     if it doesn't end up using it.

 (9) Keyrings.

     A number of changes have been made to the keyrings code:

     (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have
     	 all been dropped and built in to the credentials functions directly.
     	 They may want separating out again later.

     (b) key_alloc() and search_process_keyrings() now take a cred pointer
     	 rather than a task pointer to specify the security context.

     (c) copy_creds() gives a new thread within the same thread group a new
     	 thread keyring if its parent had one, otherwise it discards the thread
     	 keyring.

     (d) The authorisation key now points directly to the credentials to extend
     	 the search into rather pointing to the task that carries them.

     (e) Installing thread, process or session keyrings causes a new set of
     	 credentials to be created, even though it's not strictly necessary for
     	 process or session keyrings (they're shared).

(10) Usermode helper.

     The usermode helper code now carries a cred struct pointer in its
     subprocess_info struct instead of a new session keyring pointer.  This set
     of credentials is derived from init_cred and installed on the new process
     after it has been cloned.

     call_usermodehelper_setup() allocates the new credentials and
     call_usermodehelper_freeinfo() discards them if they haven't been used.  A
     special cred function (prepare_usermodeinfo_creds()) is provided
     specifically for call_usermodehelper_setup() to call.

     call_usermodehelper_setkeys() adjusts the credentials to sport the
     supplied keyring as the new session keyring.

(11) SELinux.

     SELinux has a number of changes, in addition to those to support the LSM
     interface changes mentioned above:

     (a) selinux_setprocattr() no longer does its check for whether the
     	 current ptracer can access processes with the new SID inside the lock
     	 that covers getting the ptracer's SID.  Whilst this lock ensures that
     	 the check is done with the ptracer pinned, the result is only valid
     	 until the lock is released, so there's no point doing it inside the
     	 lock.

(12) is_single_threaded().

     This function has been extracted from selinux_setprocattr() and put into
     a file of its own in the lib/ directory as join_session_keyring() now
     wants to use it too.

     The code in SELinux just checked to see whether a task shared mm_structs
     with other tasks (CLONE_VM), but that isn't good enough.  We really want
     to know if they're part of the same thread group (CLONE_THREAD).

(13) nfsd.

     The NFS server daemon now has to use the COW credentials to set the
     credentials it is going to use.  It really needs to pass the credentials
     down to the functions it calls, but it can't do that until other patches
     in this series have been applied.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:23 +11:00
David Howells 8bbf4976b5 KEYS: Alter use of key instantiation link-to-keyring argument
Alter the use of the key instantiation and negation functions' link-to-keyring
arguments.  Currently this specifies a keyring in the target process to link
the key into, creating the keyring if it doesn't exist.  This, however, can be
a problem for copy-on-write credentials as it means that the instantiating
process can alter the credentials of the requesting process.

This patch alters the behaviour such that:

 (1) If keyctl_instantiate_key() or keyctl_negate_key() are given a specific
     keyring by ID (ringid >= 0), then that keyring will be used.

 (2) If keyctl_instantiate_key() or keyctl_negate_key() are given one of the
     special constants that refer to the requesting process's keyrings
     (KEY_SPEC_*_KEYRING, all <= 0), then:

     (a) If sys_request_key() was given a keyring to use (destringid) then the
     	 key will be attached to that keyring.

     (b) If sys_request_key() was given a NULL keyring, then the key being
     	 instantiated will be attached to the default keyring as set by
     	 keyctl_set_reqkey_keyring().

 (3) No extra link will be made.

Decision point (1) follows current behaviour, and allows those instantiators
who've searched for a specifically named keyring in the requestor's keyring so
as to partition the keys by type to still have their named keyrings.

Decision point (2) allows the requestor to make sure that the key or keys that
get produced by request_key() go where they want, whilst allowing the
instantiator to request that the key is retained.  This is mainly useful for
situations where the instantiator makes a secondary request, the key for which
should be retained by the initial requestor:

	+-----------+        +--------------+        +--------------+
	|           |        |              |        |              |
	| Requestor |------->| Instantiator |------->| Instantiator |
	|           |        |              |        |              |
	+-----------+        +--------------+        +--------------+
	           request_key()           request_key()

This might be useful, for example, in Kerberos, where the requestor requests a
ticket, and then the ticket instantiator requests the TGT, which someone else
then has to go and fetch.  The TGT, however, should be retained in the
keyrings of the requestor, not the first instantiator.  To make this explict
an extra special keyring constant is also added.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:14 +11:00
Linus Torvalds c8d8a2321f Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  module: remove CONFIG_KMOD in comment after #endif
  remove CONFIG_KMOD from fs
  remove CONFIG_KMOD from drivers

Manually fix conflict due to include cleanups in drivers/md/md.c
2008-10-16 12:38:34 -07:00
Rafael J. Wysocki 1bfcf1304e pm: rework disabling of user mode helpers during suspend/hibernation
We currently use a PM notifier to disable user mode helpers before suspend
and hibernation and to re-enable them during resume.  However, this is not
an ideal solution, because if any drivers want to upload firmware into
memory before suspend, they have to use a PM notifier for this purpose and
there is no guarantee that the ordering of PM notifiers will be as
expected (ie.  the notifier that disables user mode helpers has to be run
after the driver's notifier used for uploading the firmware).

For this reason, it seems better to move the disabling and enabling of
user mode helpers to separate functions that will be called by the PM core
as necessary.

[akpm@linux-foundation.org: remove unneeded ifdefs]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:29 -07:00
Rusty Russell 118a9069f0 module: remove CONFIG_KMOD in comment after #endif
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-10-17 02:38:37 +11:00
KOSAKI Motohiro ac331d158e call_usermodehelper(): increase reliability
Presently call_usermodehelper_setup() uses GFP_ATOMIC.  but it can return
NULL _very_ easily.

GFP_ATOMIC is needed only when we can't sleep.  and, GFP_KERNEL is robust
and better.

thus, I add gfp_mask argument to call_usermodehelper_setup().

So, its callers pass the gfp_t as below:

call_usermodehelper() and call_usermodehelper_keys():
	depend on 'wait' argument.
call_usermodehelper_pipe():
	always GFP_KERNEL because always run under process context.
orderly_poweroff():
	pass to GFP_ATOMIC because may run under interrupt context.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: "Paul Menage" <menage@google.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:28 -07:00
Ulrich Drepper be61a86d72 flag parameters: NONBLOCK in pipe
This patch adds O_NONBLOCK support to pipe2.  It is minimally more involved
than the patches for eventfd et.al but still trivial.  The interfaces of the
create_write_pipe and create_read_pipe helper functions were changed and the
one other caller as well.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_pipe2
# ifdef __x86_64__
#  define __NR_pipe2 293
# elif defined __i386__
#  define __NR_pipe2 331
# else
#  error "need __NR_pipe2"
# endif
#endif

int
main (void)
{
  int fds[2];
  if (syscall (__NR_pipe2, fds, 0) == -1)
    {
      puts ("pipe2(0) failed");
      return 1;
    }
  for (int i = 0; i < 2; ++i)
    {
      int fl = fcntl (fds[i], F_GETFL);
      if (fl == -1)
        {
          puts ("fcntl failed");
          return 1;
        }
      if (fl & O_NONBLOCK)
        {
          printf ("pipe2(0) set non-blocking mode for fds[%d]\n", i);
          return 1;
        }
      close (fds[i]);
    }

  if (syscall (__NR_pipe2, fds, O_NONBLOCK) == -1)
    {
      puts ("pipe2(O_NONBLOCK) failed");
      return 1;
    }
  for (int i = 0; i < 2; ++i)
    {
      int fl = fcntl (fds[i], F_GETFL);
      if (fl == -1)
        {
          puts ("fcntl failed");
          return 1;
        }
      if ((fl & O_NONBLOCK) == 0)
        {
          printf ("pipe2(O_NONBLOCK) does not set non-blocking mode for fds[%d]\n", i);
          return 1;
        }
      close (fds[i]);
    }

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:29 -07:00
Johannes Berg a1ef5adb4c remove CONFIG_KMOD from core kernel code
Always compile request_module when the kernel allows modules.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-22 19:24:31 +10:00
Al Viro 9f3acc3140 [PATCH] split linux/file.h
Initial splitoff of the low-level stuff; taken to fdtable.h

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-05-01 13:08:16 -04:00
Mike Travis f70316dace generic: use new set_cpus_allowed_ptr function
* Use new set_cpus_allowed_ptr() function added by previous patch,
    which instead of passing the "newly allowed cpus" cpumask_t arg
    by value,  pass it by pointer:

    -int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask)
    +int set_cpus_allowed_ptr(struct task_struct *p, const cpumask_t *new_mask)

  * Modify CPU_MASK_ALL

Depends on:
	[sched-devel]: sched: add new set_cpus_allowed_ptr function

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:44:58 +02:00
Jan Blunck db74ece990 Dont touch fs_struct in usermodehelper
This test seems to be unnecessary since we always have rootfs mounted before
calling a usermodehelper.

Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Jan Blunck <jblunck@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14 21:13:32 -08:00
Nigel Cunningham 784680336b Fix unbalanced helper_lock in kernel/kmod.c
call_usermodehelper_exec() has an exit path that can leave the
helper_lock() call at the top of the routine unbalanced.  The attached
patch fixes this issue.

Signed-off-by: Nigel Cunningham <nigel@tuxonice.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-17 15:38:59 -08:00
Michael Ellerman 3210f0ecdb Restore call_usermodehelper_pipe() behaviour
The semantics of call_usermodehelper_pipe() used to be that it would fork
the helper, and wait for the kernel thread to be started.  This was
implemented by setting sub_info.wait to 0 (implicitly), and doing a
wait_for_completion().

As part of the cleanup done in 0ab4dc9227,
call_usermodehelper_pipe() was changed to pass 1 as the value for wait to
call_usermodehelper_exec().

This is equivalent to setting sub_info.wait to 1, which is a change from
the previous behaviour.  Using 1 instead of 0 causes
__call_usermodehelper() to start the kernel thread running
wait_for_helper(), rather than directly calling ____call_usermodehelper().

The end result is that the calling kernel code blocks until the user mode
helper finishes.  As the helper is expecting input on stdin, and now no one
is writing anything, everything locks up (observed in do_coredump).

The fix is to change the 1 to UMH_WAIT_EXEC (aka 0), indicating that we
want to wait for the kernel thread to be started, but not for the helper to
finish.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-11 17:21:20 -07:00
Randy Dunlap 61df47c8da kernel-doc fix for kmod.c
Fix kmod.c:
Warning(linux-2.6.23-rc1//kernel/kmod.c:364): No description found for parameter 'envp'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:33:06 -07:00
Rafael J. Wysocki ccd4b65aef PM: prevent frozen user mode helpers from failing the freezing of tasks
At present, if a user mode helper is running while
usermodehelper_pm_callback() is executed, the helper may be frozen and the
completion in call_usermodehelper_exec() won't be completed until user
space processes are thawed.  As a result, the freezing of kernel threads
may fail, which is not desirable.

Prevent this from happening by introducing a counter of running user mode
helpers and allowing usermodehelper_pm_callback() to succeed for action =
PM_HIBERNATION_PREPARE or action = PM_SUSPEND_PREPARE only if there are no
helpers running.  [Namely, usermodehelper_pm_callback() waits for at most
RUNNING_HELPERS_TIMEOUT for the number of running helpers to become zero
and fails if that doesn't happen.]

Special thanks to Uli Luckas <u.luckas@road.de>, Pavel Machek
<pavel@ucw.cz> and Oleg Nesterov <oleg@tv-sign.ru> for reviewing the
previous versions of this patch and for very useful comments.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Uli Luckas <u.luckas@road.de>
Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:42 -07:00
Rafael J. Wysocki 8cdd4936c1 PM: disable usermode helper before hibernation and suspend
Use a hibernation and suspend notifier to disable the user mode helper before
a hibernation/suspend and enable it after the operation.

[akpm@linux-foundation.org: build fix]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:42 -07:00
Jeremy Fitzhardinge 86313c488a usermodehelper: Tidy up waiting
Rather than using a tri-state integer for the wait flag in
call_usermodehelper_exec, define a proper enum, and use that.  I've
preserved the integer values so that any callers I've missed should
still work OK.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: David Howells <dhowells@redhat.com>
2007-07-18 08:47:40 -07:00
Jeremy Fitzhardinge 0ab4dc9227 usermodehelper: split setup from execution
Rather than having hundreds of variations of call_usermodehelper for
various pieces of usermode state which could be set up, split the
info allocation and initialization from the actual process execution.

This means the general pattern becomes:
 info = call_usermodehelper_setup(path, argv, envp); /* basic state */
 call_usermodehelper_<SET EXTRA STATE>(info, stuff...);	/* extra state */
 call_usermodehelper_exec(info, wait);	/* run process and free info */

This patch introduces wrappers for all the existing calling styles for
call_usermodehelper_*, but folds their implementations into one.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: David Howells <dhowells@redhat.com>
Cc: Bj?rn Steinbrink <B.Steinbrink@gmx.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
2007-07-18 08:47:40 -07:00
Oleg Nesterov 90cce03d9b wait_for_helper: remove unneeded do_sigaction()
allow_signal(SIGCHLD) does all necessary job, no need to call do_sigaction()
prior to.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:53 -07:00
Oleg Nesterov c93465181f ____call_usermodehelper: don't flush_signals()
____call_usermodehelper() has no reason for flush_signals().  It is a fresh
forked process which is going to exec a user-space application or exit on
failure.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:53 -07:00
Jan Engelhardt b73a7e76c1 Fix kevent's childs priority greediness
Fix kevent's childs priority greediness.  Such tasks were always scheduled
at nice level -5 and, at that time, udev stole us the CPU time with -5.

Already posted at http://lkml.org/lkml/2005/1/10/85

[akpm@linux-foundation.org: add comment]
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:07 -07:00
Randy Dunlap e63340ae6b header cleaning: don't include smp_lock.h when not used
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:07 -07:00
Greg Kroah-Hartman dfff0a0671 Revert "Driver core: let request_module() send a /sys/modules/kmod/-uevent"
This reverts commit c353c3fb07.

It turns out that we end up with a loop trying to load the unix
module and calling netfilter to do that.  Will redo the patch
later to not have this loop.

Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23 14:54:57 -08:00
Adrian Bunk 4541ac94d0 make kernel/kmod.c:kmod_mk static
This patch makes the needlessly global struct kmod_mk static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23 14:52:09 -08:00
Kay Sievers c353c3fb07 Driver core: let request_module() send a /sys/modules/kmod/-uevent
On recent systems, calls to /sbin/modprobe are handled by udev depending
on the kind of device the kernel has discovered. This patch creates an
uevent for the kernels internal request_module(), to let udev take control
over the request, instead of forking the binary directly by the kernel.
The direct execution of /sbin/modprobe can be disabled by setting:
  /sys/module/kmod/mod_request_helper (/proc/sys/kernel/modprobe)
to an empty string, the same way /proc/sys/kernel/hotplug is disabled on an
udev system.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:19:15 -08:00
Andi Kleen a98f0dd34d [PATCH] x86-64: Allow to run a program when a machine check event is detected
When a machine check event is detected (including a AMD RevF threshold
overflow event) allow to run a "trigger" program. This allows user space
to react to such events sooner.

The trigger is configured using a new trigger entry in the
machinecheck sysfs interface. It is currently shared between
all CPUs.

I also fixed the AMD threshold handler to run the machine
check polling code immediately to actually log any events
that might have caused the threshold interrupt.

Also added some documentation for the mce sysfs interface.

Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:23 +01:00
Kirill Korotaev 6b3286ed11 [PATCH] rename struct namespace to struct mnt_namespace
Rename 'struct namespace' to 'struct mnt_namespace' to avoid confusion with
other namespaces being developped for the containers : pid, uts, ipc, etc.
'namespace' variables and attributes are also renamed to 'mnt_ns'

Signed-off-by: Kirill Korotaev <dev@sw.ru>
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:51 -08:00
David Howells 4c1ac1b491 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	drivers/infiniband/core/iwcm.c
	drivers/net/chelsio/cxgb2.c
	drivers/net/wireless/bcm43xx/bcm43xx_main.c
	drivers/net/wireless/prism54/islpci_eth.c
	drivers/usb/core/hub.h
	drivers/usb/input/hid-core.c
	net/core/netpoll.c

Fix up merge failures with Linus's head and fix new compilation failures.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05 14:37:56 +00:00
Akinobu Mita 3cce4856ff [PATCH] fix create_write_pipe() error check
The return value of create_write_pipe()/create_read_pipe() should be
checked by IS_ERR().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-28 17:26:50 -08:00
David Howells 65f27f3844 WorkStruct: Pass the work_struct pointer instead of context data
Pass the work_struct pointer to the work function rather than context data.
The work function can use container_of() to work out the data.

For the cases where the container of the work_struct may go away the moment the
pending bit is cleared, it is made possible to defer the release of the
structure by deferring the clearing of the pending bit.

To make this work, an extra flag is introduced into the management side of the
work_struct.  This governs auto-release of the structure upon execution.

Ordinarily, the work queue executor would release the work_struct for further
scheduling or deallocation by clearing the pending bit prior to jumping to the
work function.  This means that, unless the driver makes some guarantee itself
that the work_struct won't go away, the work function may not access anything
else in the work_struct or its container lest they be deallocated..  This is a
problem if the auxiliary data is taken away (as done by the last patch).

However, if the pending bit is *not* cleared before jumping to the work
function, then the work function *may* access the work_struct and its container
with no problems.  But then the work function must itself release the
work_struct by calling work_release().

In most cases, automatic release is fine, so this is the default.  Special
initiators exist for the non-auto-release case (ending in _NAR).


Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 14:55:48 +00:00
Arnd Bergmann 6760856791 [PATCH] introduce kernel_execve
The use of execve() in the kernel is dubious, since it relies on the
__KERNEL_SYSCALLS__ mechanism that stores the result in a global errno
variable.  As a first step of getting rid of this, change all users to a
global kernel_execve function that returns a proper error code.

This function is a terrible hack, and a later patch removes it again after the
kernel syscalls are gone.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Hirokazu Takata <takata.hirokazu@renesas.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:23 -07:00
Andi Kleen d025c9db7f [PATCH] Support piping into commands in /proc/sys/kernel/core_pattern
Using the infrastructure created in previous patches implement support to
pipe core dumps into programs.

This is done by overloading the existing core_pattern sysctl
with a new syntax:

|program

When the first character of the pattern is a '|' the kernel will instead
threat the rest of the pattern as a command to run.  The core dump will be
written to the standard input of that program instead of to a file.

This is useful for having automatic core dump analysis without filling up
disks.  The program can do some simple analysis and save only a summary of
the core dump.

The core dump proces will run with the privileges and in the name space of
the process that caused the core dump.

I also increased the core pattern size to 128 bytes so that longer command
lines fit.

Most of the changes comes from allowing core dumps without seeks.  They are
fairly straight forward though.

One small incompatibility is that if someone had a core pattern previously
that started with '|' they will get suddenly new behaviour.  I think that's
unlikely to be a real problem though.

Additional background:

> Very nice, do you happen to have a program that can accept this kind of
> input for crash dumps?  I'm guessing that the embedded people will
> really want this functionality.

I had a cheesy demo/prototype.  Basically it wrote the dump to a file again,
ran gdb on it to get a backtrace and wrote the summary to a shared directory.
Then there was a simple CGI script to generate a "top 10" crashes HTML
listing.

Unfortunately this still had the disadvantage to needing full disk space for a
dump except for deleting it afterwards (in fact it was worse because over the
pipe holes didn't work so if you have a holey address map it would require
more space).

Fortunately gdb seems to be happy to handle /proc/pid/fd/xxx input pipes as
cores (at least it worked with zsh's =(cat core) syntax), so it would be
likely possible to do it without temporary space with a simple wrapper that
calls it in the right way.  I ran out of time before doing that though.

The demo prototype scripts weren't very good.  If there is really interest I
can dig them out (they are currently on a laptop disk on the desk with the
laptop itself being in service), but I would recommend to rewrite them for any
serious application of this and fix the disk space problem.

Also to be really useful it should probably find a way to automatically fetch
the debuginfos (I cheated and just installed them in advance).  If nobody else
does it I can probably do the rewrite myself again at some point.

My hope at some point was that desktops would support it in their builtin
crash reporters, but at least the KDE people I talked too seemed to be happy
with their user space only solution.

Alan sayeth:

  I don't believe that piping as such as neccessarily the right model, but
  the ability to intercept and processes core dumps from user space is asked
  for by many enterprise users as well.  They want to know about, capture,
  analyse and process core dumps, often centrally and in automated form.

[akpm@osdl.org: loff_t != unsigned long]
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:33 -07:00
Andi Kleen e239ca5405 [PATCH] Create call_usermodehelper_pipe()
A new member in the ever growing family of call_usermode* functions is
born.  The new call_usermodehelper_pipe() function allows to pipe data to
the stdin of the called user mode progam and behaves otherwise like the
normal call_usermodehelp() (except that it always waits for the child to
finish)

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:33 -07:00
Björn Steinbrink 111dbe0c8a [PATCH] Fix ____call_usermodehelper errors being silently ignored
If ____call_usermodehelper fails, we're not interested in the child
process' exit value, but the real error, so let's stop wait_for_helper from
overwriting it in that case.

Issue discovered by Benedikt Böhm while working on a Linux-VServer usermode
helper.

Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29 09:18:16 -07:00
Kenneth Lee e4b69aa2a1 [PATCH] bug fix in kernel/kmod.c
I think there is a bug in kmod.c: In __call_usermodehelper(), when
kernel_thread(wait_for_helper, ...) return success, since wait_for_helper()
might call complete() at any time, the sub_info should not be used any
more.

Normally wait_for_helper() take a long time to finish, you may not get
problem for most of the case.  But if you remove /sbin/modprobe, it may
become easier for you to get a oop in khelper.

Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-16 12:54:32 -07:00
Ingo Molnar 60be6b9a41 [PATCH] lockdep: annotate on-stack completions
lockdep needs to have the waitqueue lock initialized for on-stack waitqueues
implicitly initialized by DECLARE_COMPLETION().  Annotate on-stack completions
accordingly.

Has no effect on non-lockdep kernels.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:27:09 -07:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Oleg Nesterov 8292d633ad [PATCH] wait_for_helper: trivial style cleanup
Use NULL instead of (... *)0

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 18:36:41 -08:00
David Howells 20e1129ab8 [PATCH] Keys: Get rid of warning in kmod.c if keys disabled
The attached patch gets rid of a "statement without effect" warning when
CONFIG_KEYS is disabled by making use of the return value of key_get().
The compiler will optimise all of this away when keys are disabled.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:23 -08:00