Граф коммитов

21 Коммитов

Автор SHA1 Сообщение Дата
Will Deacon c5102f5935 ARM: 7408/1: cacheflush: return error to userspace when flushing syscall fails
The cacheflush syscall can fail for two reasons:

(1) The arguments are invalid (nonsensical address range or no VMA)

(2) The region generates a translation fault on a VIPT or PIPT cache

This patch allows do_cache_op to return an error code to userspace in
the case of the above. The various coherent_user_range implementations
are modified to return 0 in the case of VIVT caches or -EFAULT in the
case of an abort on v6/v7 cores.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-02 11:12:49 +01:00
Rabin Vincent 8e43a905dd ARM: 7325/1: fix v7 boot with lockdep enabled
Bootup with lockdep enabled has been broken on v7 since b46c0f7465
("ARM: 7321/1: cache-v7: Disable preemption when reading CCSIDR").

This is because v7_setup (which is called very early during boot) calls
v7_flush_dcache_all, and the save_and_disable_irqs added by that patch
ends up attempting to call into lockdep C code (trace_hardirqs_off())
when we are in no position to execute it (no stack, MMU off).

Fix this by using a notrace variant of save_and_disable_irqs.  The code
already uses the notrace variant of restore_irqs.

Reviewed-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-15 21:09:52 +00:00
Stephen Boyd b46c0f7465 ARM: 7321/1: cache-v7: Disable preemption when reading CCSIDR
armv7's flush_cache_all() flushes caches via set/way. To
determine the cache attributes (line size, number of sets,
etc.) the assembly first writes the CSSELR register to select a
cache level and then reads the CCSIDR register. The CSSELR register
is banked per-cpu and is used to determine which cache level CCSIDR
reads. If the task is migrated between when the CSSELR is written and
the CCSIDR is read the CCSIDR value may be for an unexpected cache
level (for example L1 instead of L2) and incorrect cache flushing
could occur.

Disable interrupts across the write and read so that the correct
cache attributes are read and used for the cache flushing
routine. We disable interrupts instead of disabling preemption
because the critical section is only 3 instructions and we want
to call v7_dcache_flush_all from __v7_setup which doesn't have a
full kernel stack with a struct thread_info.

This fixes a problem we see in scm_call() when flush_cache_all()
is called from preemptible context and sometimes the L2 cache is
not properly flushed out.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-09 16:25:37 +00:00
Will Deacon f630c1bdfb ARM: 7091/1: errata: D-cache line maintenance operation by MVA may not succeed
This patch implements a workaround for erratum 764369 affecting
Cortex-A9 MPCore with two or more processors (all current revisions).
Under certain timing circumstances, a data cache line maintenance
operation by MVA targeting an Inner Shareable memory region may fail to
proceed up to either the Point of Coherency or to the Point of
Unification of the system. This workaround adds a DSB instruction before
the relevant cache maintenance functions and sets a specific bit in the
diagnostic control register of the SCU.

Cc: <stable@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-17 12:47:17 +01:00
Dave Martin 455a01ec30 ARM: mm: cache-v7: Use the new processor struct macros
Signed-off-by: Dave Martin <dave.martin@linaro.org>
2011-07-07 15:31:06 +01:00
Will Deacon a248b13b21 ARM: 6941/1: cache: ensure MVA is cacheline aligned in flush_kern_dcache_area
The v6 and v7 implementations of flush_kern_dcache_area do not align
the passed MVA to the size of a cacheline in the data cache. If a
misaligned address is used, only a subset of the requested area will
be flushed. This has been observed to cause failures in SMP boot where
the secondary_data initialised by the primary CPU is not cacheline
aligned, causing the secondary CPUs to read incorrect values for their
pgd and stack pointers.

This patch ensures that the base address is cacheline aligned before
flushing the d-cache.

Cc: <stable@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-26 12:14:32 +01:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Catalin Marinas da30e0ac0f ARM: 6528/1: Use CTR for the I-cache line size on ARMv7
The current implementation of the v7_coherent_*_range function assumes
that the D and I cache lines have the same size, which is incorrect
architecturally. This patch adds the icache_line_size macro which reads
the CTR register. The main loop in v7_coherent_*_range is split in two
independent loops or the D and I caches. This also has the performance
advantage that the DSB is moved outside the main loop.

Reported-by: Kevin Sapp <ksapp@quicinc.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-12 23:25:58 +00:00
Tony Lindgren 81d11955bf ARM: 6405/1: Handle __flush_icache_all for CONFIG_SMP_ON_UP
Do this by adding flush_icache_all to cache_fns for ARMv6 and 7.
As flush_icache_all may neeed to be called from flush_kern_cache_all,
add it as the first entry in the cache_fns.

Note that now we can remove the ARM_ERRATA_411920 dependency
to !SMP so it can be selected on UP ARMv6 processors, such
as omap2.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-04 20:23:36 +01:00
Russell King f00ec48fad ARM: Allow SMP kernels to boot on UP systems
UP systems do not implement all the instructions that SMP systems have,
so in order to boot a SMP kernel on a UP system, we need to rewrite
parts of the kernel.

Do this using an 'alternatives' scheme, where the kernel code and data
is modified prior to initialization to replace the SMP instructions,
thereby rendering the problematical code ineffectual.  We use the linker
to generate a list of 32-bit word locations and their replacement values,
and run through these replacements when we detect a UP system.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-04 20:23:36 +01:00
Santosh Shilimkar a901ff715d ARM: 6139/1: ARMv7: Use the Inner Shareable I-cache on MP
This patch fixes the flush_cache_all for ARMv7 SMP.It was
missing from commit b8349b569a

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-20 23:52:38 +01:00
Catalin Marinas b8349b569a ARM: 6112/1: Use the Inner Shareable I-cache and BTB ops on ARMv7 SMP
The standard I-cache Invalidate All (ICIALLU) and Branch Predication
Invalidate All (BPIALL) operations are not automatically broadcast to
the other CPUs in an ARMv7 MP system. The patch adds the Inner Shareable
variants, ICIALLUIS and BPIALLIS, if ARMv7 and SMP.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-08 10:44:30 +01:00
Russell King 2ffe2da3e7 ARM: dma-mapping: fix for speculative prefetching
ARMv6 and ARMv7 CPUs can perform speculative prefetching, which makes
DMA cache coherency handling slightly more interesting.  Rather than
being able to rely upon the CPU not accessing the DMA buffer until DMA
has completed, we now must expect that the cache could be loaded with
possibly stale data from the DMA buffer.

Where DMA involves data being transferred to the device, we clean the
cache before handing it over for DMA, otherwise we invalidate the buffer
to get rid of potential writebacks.  On DMA Completion, if data was
transferred from the device, we invalidate the buffer to get rid of
any stale speculative prefetches.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-02-15 15:22:25 +00:00
Russell King 702b94bff3 ARM: dma-mapping: remove dmac_clean_range and dmac_inv_range
These are now unused, and so can be removed.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-02-15 15:22:23 +00:00
Russell King a9c9147eb9 ARM: dma-mapping: provide per-cpu type map/unmap functions
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-02-15 15:22:20 +00:00
Russell King 2c9b9c8490 ARM: add size argument to __cpuc_flush_dcache_page
... and rename the function since it no longer operates on just
pages.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-14 14:53:22 +00:00
Catalin Marinas 32cfb1b16f ARM: 5746/1: Handle possible translation errors in ARMv6/v7 coherent_user_range
This is needed because applications using the sys_cacheflush system call
can pass a memory range which isn't mapped yet even though the
corresponding vma is valid. The patch also adds unwinding annotations
for correct backtraces from the coherent_user_range() functions.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07 13:12:59 +01:00
Catalin Marinas 347c8b70b1 Thumb-2: Implement the unified arch/arm/mm support
This patch adds the ARM/Thumb-2 unified support to the arch/arm/mm/*
files.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 12:32:56 +01:00
Catalin Marinas c30c2f99e1 ARMv7: Add extra barriers for flush_cache_all compressed/head.S
The flush_cache_all function on ARMv7 is implemented as a series of
cache operations by set/way. These are not guaranteed to be ordered with
previous memory accesses, requiring a DMB. This patch also adds barriers
for the TLB operations in compressed/head.S

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-11-06 13:23:07 +00:00
Catalin Marinas 93ed397011 [ARM] 5227/1: Add the ENDPROC declarations to the .S files
This declaration specifies the "function" type and size for various
assembly functions, mainly needed for generating the correct branch
instructions in Thumb-2.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-01 12:06:34 +01:00
Catalin Marinas bbe888864e [ARM] armv7: add support for ARMv7 cores.
This patch adds support for the ARMv7 cores.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-08 22:55:53 +01:00