Граф коммитов

13 Коммитов

Автор SHA1 Сообщение Дата
Namhyung Kim e0d18fe063 tracing/probes: Fix build break on !CONFIG_KPROBE_EVENT
When kprobe-based dynamic event tracer is not enabled, it caused
following build error:

   kernel/built-in.o: In function `traceprobe_update_arg':
   (.text+0x10c8dd): undefined reference to `fetch_symbol_u8'
   kernel/built-in.o: In function `traceprobe_update_arg':
   (.text+0x10c8e9): undefined reference to `fetch_symbol_u16'
   kernel/built-in.o: In function `traceprobe_update_arg':
   (.text+0x10c8f5): undefined reference to `fetch_symbol_u32'
   kernel/built-in.o: In function `traceprobe_update_arg':
   (.text+0x10c901): undefined reference to `fetch_symbol_u64'
   kernel/built-in.o: In function `traceprobe_update_arg':
   (.text+0x10c909): undefined reference to `fetch_symbol_string'
   kernel/built-in.o: In function `traceprobe_update_arg':
   (.text+0x10c913): undefined reference to `fetch_symbol_string_size'
   ...

It was due to the fetch methods are referred from CHECK_FETCH_FUNCS
macro and since it was only defined in trace_kprobe.c.  Move NULL
definition of such fetch functions to the header file.

Note, it also requires CONFIG_BRANCH_PROFILING enabled to trigger
this failure as well. This is because the "fetch_symbol_*" variables
are referenced in a "else if" statement that will only call
update_symbol_cache(), which is a static inline stub function
when CONFIG_KPROBE_EVENT is not enabled. gcc is smart enough
to optimize this "else if" out and that also removes the code that
references the undefined variables.

But when BRANCH_PROFILING is enabled, it fools gcc into keeping
the if statement around and thus references the undefined symbols
and fails to build.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-03 15:27:18 -05:00
Namhyung Kim b7e0bf341f tracing/uprobes: Add @+file_offset fetch method
Enable to fetch data from a file offset.  Currently it only supports
fetching from same binary uprobe set.  It'll translate the file offset
to a proper virtual address in the process.

The syntax is "@+OFFSET" as it does similar to normal memory fetching
(@ADDR) which does no address translation.

Suggested-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 20:57:05 -05:00
Namhyung Kim 5baaa59ef0 tracing/probes: Implement 'memory' fetch method for uprobes
Use separate method to fetch from memory.  Move existing functions to
trace_kprobe.c and make them static.  Also add new memory fetch
implementation for uprobes.

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 16:17:43 -05:00
Namhyung Kim 1301a44e77 tracing/probes: Move 'symbol' fetch method to kprobes
Move existing functions to trace_kprobe.c and add NULL entries to the
uprobes fetch type table.  I don't make them static since some generic
routines like update/free_XXX_fetch_param() require pointers to the
functions.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 16:17:41 -05:00
Namhyung Kim 3fd996a295 tracing/probes: Implement 'stack' fetch method for uprobes
Use separate method to fetch from stack.  Move existing functions to
trace_kprobe.c and make them static.  Also add new stack fetch
implementation for uprobes.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 16:17:40 -05:00
Namhyung Kim 34fee3a104 tracing/probes: Split [ku]probes_fetch_type_table
Use separate fetch_type_table for kprobes and uprobes.  It currently
shares all fetch methods but some of them will be implemented
differently later.

This is not to break build if [ku]probes is configured alone (like
!CONFIG_KPROBE_EVENT and CONFIG_UPROBE_EVENT).  So I added '__weak'
to the table declaration so that it can be safely omitted when it
configured out.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 16:17:39 -05:00
Namhyung Kim b26c74e116 tracing/probes: Move fetch function helpers to trace_probe.h
Move fetch function helper macros/functions to the header file and
make them external.  This is preparation of supporting uprobe fetch
table in next patch.

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 16:17:38 -05:00
Namhyung Kim 5bf652aaf4 tracing/probes: Integrate duplicate set_print_fmt()
The set_print_fmt() functions are implemented almost same for
[ku]probes.  Move it to a common place and get rid of the duplication.

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 16:17:38 -05:00
Namhyung Kim 2dc1018372 tracing/kprobes: Move common functions to trace_probe.h
The __get_data_size() and store_trace_args() will be used by uprobes
too.  Move them to a common location.

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 16:17:37 -05:00
Namhyung Kim c31ffb3ff6 tracing/kprobes: Factor out struct trace_probe
There are functions that can be shared to both of kprobes and uprobes.
Separate common data structure to struct trace_probe and use it from
the shared functions.

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 16:17:29 -05:00
Oleg Nesterov b64b007797 uprobes/tracing: Introduce is_trace_uprobe_enabled()
probe_event_enable/disable() check tu->consumer != NULL to avoid the
wrong uprobe_register/unregister().

We are going to kill this pointer and "struct uprobe_trace_consumer",
so we add the new helper, is_trace_uprobe_enabled(), which can rely
on TP_FLAG_TRACE/TP_FLAG_PROFILE instead.

Note: the current logic doesn't look optimal, it is not clear why
TP_FLAG_TRACE/TP_FLAG_PROFILE are mutually exclusive, we will probably
change this later.

Also kill the unused TP_FLAG_UPROBE.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-02-08 18:24:30 +01:00
Srikar Dronamraju f3f096cfed tracing: Provide trace events interface for uprobes
Implements trace_event support for uprobes. In its current form
it can be used to put probes at a specified offset in a file and
dump the required registers when the code flow reaches the
probed address.

The following example shows how to dump the instruction pointer
and %ax a register at the probed text address.  Here we are
trying to probe zfree in /bin/zsh:

 # cd /sys/kernel/debug/tracing/
 # cat /proc/`pgrep  zsh`/maps | grep /bin/zsh | grep r-xp
 00400000-0048a000 r-xp 00000000 08:03 130904 /bin/zsh
 # objdump -T /bin/zsh | grep -w zfree
 0000000000446420 g    DF .text  0000000000000012  Base
 zfree # echo 'p /bin/zsh:0x46420 %ip %ax' > uprobe_events
 # cat uprobe_events
 p:uprobes/p_zsh_0x46420 /bin/zsh:0x0000000000046420
 # echo 1 > events/uprobes/enable
 # sleep 20
 # echo 0 > events/uprobes/enable
 # cat trace
 # tracer: nop
 #
 #           TASK-PID    CPU#    TIMESTAMP  FUNCTION
 #              | |       |          |         |
              zsh-24842 [006] 258544.995456: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
              zsh-24842 [007] 258545.000270: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
              zsh-24842 [002] 258545.043929: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
              zsh-24842 [004] 258547.046129: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79

Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120411103043.GB29437@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-07 14:30:17 +02:00
Srikar Dronamraju 8ab83f5647 tracing: Extract out common code for kprobes/uprobes trace events
Move parts of trace_kprobe.c that can be shared with upcoming
trace_uprobe.c. Common code to kernel/trace/trace_probe.h and
kernel/trace/trace_probe.c. There are no functional changes.

Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120409091144.8343.76218.sendpatchset@srdronam.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-07 14:29:57 +02:00