Since the xtime lock was split into the timekeeping lock and
the jiffies lock, we no longer need to call update_wall_time()
while holding the jiffies lock.
Thus, this patch splits update_wall_time() out from do_timer().
This allows us to get away from calling clock_was_set_delayed()
in update_wall_time() and instead use the standard clock_was_set()
call that previously would deadlock, as it causes the jiffies lock
to be acquired.
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
As part of normal operaions, the hrtimer subsystem frequently calls
into the timekeeping code, creating a locking order of
hrtimer locks -> timekeeping locks
clock_was_set_delayed() was suppoed to allow us to avoid deadlocks
between the timekeeping the hrtimer subsystem, so that we could
notify the hrtimer subsytem the time had changed while holding
the timekeeping locks. This was done by scheduling delayed work
that would run later once we were out of the timekeeing code.
But unfortunately the lock chains are complex enoguh that in
scheduling delayed work, we end up eventually trying to grab
an hrtimer lock.
Sasha Levin noticed this in testing when the new seqlock lockdep
enablement triggered the following (somewhat abrieviated) message:
[ 251.100221] ======================================================
[ 251.100221] [ INFO: possible circular locking dependency detected ]
[ 251.100221] 3.13.0-rc2-next-20131206-sasha-00005-g8be2375-dirty #4053 Not tainted
[ 251.101967] -------------------------------------------------------
[ 251.101967] kworker/10:1/4506 is trying to acquire lock:
[ 251.101967] (timekeeper_seq){----..}, at: [<ffffffff81160e96>] retrigger_next_event+0x56/0x70
[ 251.101967]
[ 251.101967] but task is already holding lock:
[ 251.101967] (hrtimer_bases.lock#11){-.-...}, at: [<ffffffff81160e7c>] retrigger_next_event+0x3c/0x70
[ 251.101967]
[ 251.101967] which lock already depends on the new lock.
[ 251.101967]
[ 251.101967]
[ 251.101967] the existing dependency chain (in reverse order) is:
[ 251.101967]
-> #5 (hrtimer_bases.lock#11){-.-...}:
[snipped]
-> #4 (&rt_b->rt_runtime_lock){-.-...}:
[snipped]
-> #3 (&rq->lock){-.-.-.}:
[snipped]
-> #2 (&p->pi_lock){-.-.-.}:
[snipped]
-> #1 (&(&pool->lock)->rlock){-.-...}:
[ 251.101967] [<ffffffff81194803>] validate_chain+0x6c3/0x7b0
[ 251.101967] [<ffffffff81194d9d>] __lock_acquire+0x4ad/0x580
[ 251.101967] [<ffffffff81194ff2>] lock_acquire+0x182/0x1d0
[ 251.101967] [<ffffffff84398500>] _raw_spin_lock+0x40/0x80
[ 251.101967] [<ffffffff81153e69>] __queue_work+0x1a9/0x3f0
[ 251.101967] [<ffffffff81154168>] queue_work_on+0x98/0x120
[ 251.101967] [<ffffffff81161351>] clock_was_set_delayed+0x21/0x30
[ 251.101967] [<ffffffff811c4bd1>] do_adjtimex+0x111/0x160
[ 251.101967] [<ffffffff811e2711>] compat_sys_adjtimex+0x41/0x70
[ 251.101967] [<ffffffff843a4b49>] ia32_sysret+0x0/0x5
[ 251.101967]
-> #0 (timekeeper_seq){----..}:
[snipped]
[ 251.101967] other info that might help us debug this:
[ 251.101967]
[ 251.101967] Chain exists of:
timekeeper_seq --> &rt_b->rt_runtime_lock --> hrtimer_bases.lock#11
[ 251.101967] Possible unsafe locking scenario:
[ 251.101967]
[ 251.101967] CPU0 CPU1
[ 251.101967] ---- ----
[ 251.101967] lock(hrtimer_bases.lock#11);
[ 251.101967] lock(&rt_b->rt_runtime_lock);
[ 251.101967] lock(hrtimer_bases.lock#11);
[ 251.101967] lock(timekeeper_seq);
[ 251.101967]
[ 251.101967] *** DEADLOCK ***
[ 251.101967]
[ 251.101967] 3 locks held by kworker/10:1/4506:
[ 251.101967] #0: (events){.+.+.+}, at: [<ffffffff81154960>] process_one_work+0x200/0x530
[ 251.101967] #1: (hrtimer_work){+.+...}, at: [<ffffffff81154960>] process_one_work+0x200/0x530
[ 251.101967] #2: (hrtimer_bases.lock#11){-.-...}, at: [<ffffffff81160e7c>] retrigger_next_event+0x3c/0x70
[ 251.101967]
[ 251.101967] stack backtrace:
[ 251.101967] CPU: 10 PID: 4506 Comm: kworker/10:1 Not tainted 3.13.0-rc2-next-20131206-sasha-00005-g8be2375-dirty #4053
[ 251.101967] Workqueue: events clock_was_set_work
So the best solution is to avoid calling clock_was_set_delayed() while
holding the timekeeping lock, and instead using a flag variable to
decide if we should call clock_was_set() once we've released the locks.
This works for the case here, where the do_adjtimex() was the deadlock
trigger point. Unfortuantely, in update_wall_time() we still hold
the jiffies lock, which would deadlock with the ipi triggered by
clock_was_set(), preventing us from calling it even after we drop the
timekeeping lock. So instead call clock_was_set_delayed() at that point.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: stable <stable@vger.kernel.org> #3.10+
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Tested-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
In 780427f0e1 (Indicate that clock was set in the pvclock
gtod notifier), logic was added to pass a CLOCK_WAS_SET
notification to the pvclock notifier chain.
While that patch added a action flag returned from
accumulate_nsecs_to_secs(), it only uses the returned value
in one location, and not in the logarithmic accumulation.
This means if a leap second triggered during the logarithmic
accumulation (which is most likely where it would happen),
the notification that the clock was set would not make it to
the pv notifiers.
This patch extends the logarithmic_accumulation pass down
that action flag so proper notification will occur.
This patch also changes the varialbe action -> clock_set
per Ingo's suggestion.
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: <xen-devel@lists.xen.org>
Cc: stable <stable@vger.kernel.org> #3.11+
Signed-off-by: John Stultz <john.stultz@linaro.org>
Since 48cdc135d4 (Implement a shadow timekeeper), we have to
call timekeeping_update() after any adjustment to the timekeeping
structure in order to make sure that any adjustments to the structure
persist.
Unfortunately, the updates to the tai offset via adjtimex do not
trigger this update, causing adjustments to the tai offset to be
made and then over-written by the previous value at the next
update_wall_time() call.
This patch resovles the issue by calling timekeeping_update()
right after setting the tai offset.
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable <stable@vger.kernel.org> #3.10+
Signed-off-by: John Stultz <john.stultz@linaro.org>
Add a generic event_command.set_trigger_filter() op implementation and
have the current set of trigger commands use it - this essentially
gives them all support for filters.
Syntactically, filters are supported by adding 'if <filter>' just
after the command, in which case only events matching the filter will
invoke the trigger. For example, to add a filter to an
enable/disable_event command:
echo 'enable_event:system:event if common_pid == 999' > \
.../othersys/otherevent/trigger
The above command will only enable the system:event event if the
common_pid field in the othersys:otherevent event is 999.
As another example, to add a filter to a stacktrace command:
echo 'stacktrace if common_pid == 999' > \
.../somesys/someevent/trigger
The above command will only trigger a stacktrace if the common_pid
field in the event is 999.
The filter syntax is the same as that described in the 'Event
filtering' section of Documentation/trace/events.txt.
Because triggers can now use filters, the trigger-invoking logic needs
to be moved in those cases - e.g. for ftrace_raw_event_calls, if a
trigger has a filter associated with it, the trigger invocation now
needs to happen after the { assign; } part of the call, in order for
the trigger condition to be tested.
There's still a SOFT_DISABLED-only check at the top of e.g. the
ftrace_raw_events function, so when an event is soft disabled but not
because of the presence of a trigger, the original SOFT_DISABLED
behavior remains unchanged.
There's also a bit of trickiness in that some triggers need to avoid
being invoked while an event is currently in the process of being
logged, since the trigger may itself log data into the trace buffer.
Thus we make sure the current event is committed before invoking those
triggers. To do that, we split the trigger invocation in two - the
first part (event_triggers_call()) checks the filter using the current
trace record; if a command has the post_trigger flag set, it sets a
bit for itself in the return value, otherwise it directly invoks the
trigger. Once all commands have been either invoked or set their
return flag, event_triggers_call() returns. The current record is
then either committed or discarded; if any commands have deferred
their triggers, those commands are finally invoked following the close
of the current event by event_triggers_post_call().
To simplify the above and make it more efficient, the TRIGGER_COND bit
is introduced, which is set only if a soft-disabled trigger needs to
use the log record for filter testing or needs to wait until the
current log record is closed.
The syscall event invocation code is also changed in analogous ways.
Because event triggers need to be able to create and free filters,
this also adds a couple external wrappers for the existing
create_filter and free_filter functions, which are too generic to be
made extern functions themselves.
Link: http://lkml.kernel.org/r/7164930759d8719ef460357f143d995406e4eead.1382622043.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that event triggers use ftrace_event_file(), it needs to be outside
the #ifdef CONFIG_DYNAMIC_FTRACE, as it can now be used when that is
not defined.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add 'enable_event' and 'disable_event' event_command commands.
enable_event and disable_event event triggers are added by the user
via these commands in a similar way and using practically the same
syntax as the analagous 'enable_event' and 'disable_event' ftrace
function commands, but instead of writing to the set_ftrace_filter
file, the enable_event and disable_event triggers are written to the
per-event 'trigger' files:
echo 'enable_event:system:event' > .../othersys/otherevent/trigger
echo 'disable_event:system:event' > .../othersys/otherevent/trigger
The above commands will enable or disable the 'system:event' trace
events whenever the othersys:otherevent events are hit.
This also adds a 'count' version that limits the number of times the
command will be invoked:
echo 'enable_event:system:event:N' > .../othersys/otherevent/trigger
echo 'disable_event:system:event:N' > .../othersys/otherevent/trigger
Where N is the number of times the command will be invoked.
The above commands will will enable or disable the 'system:event'
trace events whenever the othersys:otherevent events are hit, but only
N times.
This also makes the find_event_file() helper function extern, since
it's useful to use from other places, such as the event triggers code,
so make it accessible.
Link: http://lkml.kernel.org/r/f825f3048c3f6b026ee37ae5825f9fc373451828.1382622043.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add 'stacktrace' event_command. stacktrace event triggers are added
by the user via this command in a similar way and using practically
the same syntax as the analogous 'stacktrace' ftrace function command,
but instead of writing to the set_ftrace_filter file, the stacktrace
event trigger is written to the per-event 'trigger' files:
echo 'stacktrace' > .../tracing/events/somesys/someevent/trigger
The above command will turn on stacktraces for someevent i.e. whenever
someevent is hit, a stacktrace will be logged.
This also adds a 'count' version that limits the number of times the
command will be invoked:
echo 'stacktrace:N' > .../tracing/events/somesys/someevent/trigger
Where N is the number of times the command will be invoked.
The above command will log N stacktraces for someevent i.e. whenever
someevent is hit N times, a stacktrace will be logged.
Link: http://lkml.kernel.org/r/0c30c008a0828c660aa0e1bbd3255cf179ed5c30.1382622043.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add 'snapshot' event_command. snapshot event triggers are added by
the user via this command in a similar way and using practically the
same syntax as the analogous 'snapshot' ftrace function command, but
instead of writing to the set_ftrace_filter file, the snapshot event
trigger is written to the per-event 'trigger' files:
echo 'snapshot' > .../somesys/someevent/trigger
The above command will turn on snapshots for someevent i.e. whenever
someevent is hit, a snapshot will be done.
This also adds a 'count' version that limits the number of times the
command will be invoked:
echo 'snapshot:N' > .../somesys/someevent/trigger
Where N is the number of times the command will be invoked.
The above command will snapshot N times for someevent i.e. whenever
someevent is hit N times, a snapshot will be done.
Also adds a new tracing_alloc_snapshot() function - the existing
tracing_snapshot_alloc() function is a special version of
tracing_snapshot() that also does the snapshot allocation - the
snapshot triggers would like to be able to do just the allocation but
not take a snapshot; the existing tracing_snapshot_alloc() in turn now
also calls tracing_alloc_snapshot() underneath to do that allocation.
Link: http://lkml.kernel.org/r/c9524dd07ce01f9dcbd59011290e0a8d5b47d7ad.1382622043.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
[ fix up from kbuild test robot <fengguang.wu@intel.com report ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add 'traceon' and 'traceoff' event_command commands. traceon and
traceoff event triggers are added by the user via these commands in a
similar way and using practically the same syntax as the analagous
'traceon' and 'traceoff' ftrace function commands, but instead of
writing to the set_ftrace_filter file, the traceon and traceoff
triggers are written to the per-event 'trigger' files:
echo 'traceon' > .../tracing/events/somesys/someevent/trigger
echo 'traceoff' > .../tracing/events/somesys/someevent/trigger
The above command will turn tracing on or off whenever someevent is
hit.
This also adds a 'count' version that limits the number of times the
command will be invoked:
echo 'traceon:N' > .../tracing/events/somesys/someevent/trigger
echo 'traceoff:N' > .../tracing/events/somesys/someevent/trigger
Where N is the number of times the command will be invoked.
The above commands will will turn tracing on or off whenever someevent
is hit, but only N times.
Some common register/unregister_trigger() implementations of the
event_command reg()/unreg() callbacks are also provided, which add and
remove trigger instances to the per-event list of triggers, and
arm/disarm them as appropriate. event_trigger_callback() is a
general-purpose event_command func() implementation that orchestrates
command parsing and registration for most normal commands.
Most event commands will use these, but some will override and
possibly reuse them.
The event_trigger_init(), event_trigger_free(), and
event_trigger_print() functions are meant to be common implementations
of the event_trigger_ops init(), free(), and print() ops,
respectively.
Most trigger_ops implementations will use these, but some will
override and possibly reuse them.
Link: http://lkml.kernel.org/r/00a52816703b98d2072947478dd6e2d70cde5197.1382622043.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a 'trigger' file for each trace event, enabling 'trace event
triggers' to be set for trace events.
'trace event triggers' are patterned after the existing 'ftrace
function triggers' implementation except that triggers are written to
per-event 'trigger' files instead of to a single file such as the
'set_ftrace_filter' used for ftrace function triggers.
The implementation is meant to be entirely separate from ftrace
function triggers, in order to keep the respective implementations
relatively simple and to allow them to diverge.
The event trigger functionality is built on top of SOFT_DISABLE
functionality. It adds a TRIGGER_MODE bit to the ftrace_event_file
flags which is checked when any trace event fires. Triggers set for a
particular event need to be checked regardless of whether that event
is actually enabled or not - getting an event to fire even if it's not
enabled is what's already implemented by SOFT_DISABLE mode, so trigger
mode directly reuses that. Event trigger essentially inherit the soft
disable logic in __ftrace_event_enable_disable() while adding a bit of
logic and trigger reference counting via tm_ref on top of that in a
new trace_event_trigger_enable_disable() function. Because the base
__ftrace_event_enable_disable() code now needs to be invoked from
outside trace_events.c, a wrapper is also added for those usages.
The triggers for an event are actually invoked via a new function,
event_triggers_call(), and code is also added to invoke them for
ftrace_raw_event calls as well as syscall events.
The main part of the patch creates a new trace_events_trigger.c file
to contain the trace event triggers implementation.
The standard open, read, and release file operations are implemented
here.
The open() implementation sets up for the various open modes of the
'trigger' file. It creates and attaches the trigger iterator and sets
up the command parser. If opened for reading set up the trigger
seq_ops.
The read() implementation parses the event trigger written to the
'trigger' file, looks up the trigger command, and passes it along to
that event_command's func() implementation for command-specific
processing.
The release() implementation does whatever cleanup is needed to
release the 'trigger' file, like releasing the parser and trigger
iterator, etc.
A couple of functions for event command registration and
unregistration are added, along with a list to add them to and a mutex
to protect them, as well as an (initially empty) registration function
to add the set of commands that will be added by future commits, and
call to it from the trace event initialization code.
also added are a couple trigger-specific data structures needed for
these implementations such as a trigger iterator and a struct for
trigger-specific data.
A couple structs consisting mostly of function meant to be implemented
in command-specific ways, event_command and event_trigger_ops, are
used by the generic event trigger command implementations. They're
being put into trace.h alongside the other trace_event data structures
and functions, in the expectation that they'll be needed in several
trace_event-related files such as trace_events_trigger.c and
trace_events.c.
The event_command.func() function is meant to be called by the trigger
parsing code in order to add a trigger instance to the corresponding
event. It essentially coordinates adding a live trigger instance to
the event, and arming the triggering the event.
Every event_command func() implementation essentially does the
same thing for any command:
- choose ops - use the value of param to choose either a number or
count version of event_trigger_ops specific to the command
- do the register or unregister of those ops
- associate a filter, if specified, with the triggering event
The reg() and unreg() ops allow command-specific implementations for
event_trigger_op registration and unregistration, and the
get_trigger_ops() op allows command-specific event_trigger_ops
selection to be parameterized. When a trigger instance is added, the
reg() op essentially adds that trigger to the triggering event and
arms it, while unreg() does the opposite. The set_filter() function
is used to associate a filter with the trigger - if the command
doesn't specify a set_filter() implementation, the command will ignore
filters.
Each command has an associated trigger_type, which serves double duty,
both as a unique identifier for the command as well as a value that
can be used for setting a trigger mode bit during trigger invocation.
The signature of func() adds a pointer to the event_command struct,
used to invoke those functions, along with a command_data param that
can be passed to the reg/unreg functions. This allows func()
implementations to use command-specific blobs and supports code
re-use.
The event_trigger_ops.func() command corrsponds to the trigger 'probe'
function that gets called when the triggering event is actually
invoked. The other functions are used to list the trigger when
needed, along with a couple mundane book-keeping functions.
This also moves event_file_data() into trace.h so it can be used
outside of trace_events.c.
Link: http://lkml.kernel.org/r/316d95061accdee070aac8e5750afba0192fa5b9.1382622043.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Idea-by: Steve Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In struct page we have enough space to fit long-size page->ptl there,
but we use dynamically-allocated page->ptl if size(spinlock_t) is larger
than sizeof(int).
It hurts 64-bit architectures with CONFIG_GENERIC_LOCKBREAK, where
sizeof(spinlock_t) == 8, but it easily fits into struct page.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The problem is that the profiler only initializes the online
CPUs, and not possible CPUs. This causes issues if the user takes
CPUs online or offline while the profiler is running.
If we online a CPU after starting the profiler, we lose all the
trace information on the CPU going online.
If we offline a CPU after running a test and start a new test, it
will not clear the old data from that CPU.
This bug causes incorrect data to be reported to the user if they
online or offline CPUs during the profiling.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSsNBHAAoJEKQekfcNnQGuKP8H/2mol/d7z2vANh7/FeNjTKIN
VkRzDEwUIwoaJBsL75EDDXBFx7w8jjAsXyoTrqrvMRV4UNcsfm46mohQTPAmK39y
muqodL1VnVXdKrUmtw/1nL7yDi2KltQH1UwOgvwXGuUFIq5cuCXNQxNK9/1fVVVn
tIMNz5kEAG3XCwnqP0PgQxWCuA7s+aQR0ijTf4vPf1G3IJujPyG9VhJWcGS3dJTR
t8TPyatd9D/S+7/r7iZ9hS8nWpaka3qJfhiWqk16SC9LiUXVA8oFOVMoN7n6Co5E
6r2dNo01WOABlojCxi1t3afUtcV1bUjBnVkiDva5cSc84pQSxe1qRrIpjTmHk00=
=MSZs
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fix from Steven Rostedt:
"This fixes a long standing bug in the ftrace profiler. The problem is
that the profiler only initializes the online CPUs, and not possible
CPUs. This causes issues if the user takes CPUs online or offline
while the profiler is running.
If we online a CPU after starting the profiler, we lose all the trace
information on the CPU going online.
If we offline a CPU after running a test and start a new test, it will
not clear the old data from that CPU.
This bug causes incorrect data to be reported to the user if they
online or offline CPUs during the profiling"
* tag 'trace-fixes-v3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Initialize the ftrace profiler for each possible cpu
Freezable kthreads and workqueues are fundamentally problematic in
that they effectively introduce a big kernel lock widely used in the
kernel and have already been the culprit of several deadlock
scenarios. This is the latest occurrence.
During resume, libata rescans all the ports and revalidates all
pre-existing devices. If it determines that a device has gone
missing, the device is removed from the system which involves
invalidating block device and flushing bdi while holding driver core
layer locks. Unfortunately, this can race with the rest of device
resume. Because freezable kthreads and workqueues are thawed after
device resume is complete and block device removal depends on
freezable workqueues and kthreads (e.g. bdi_wq, jbd2) to make
progress, this can lead to deadlock - block device removal can't
proceed because kthreads are frozen and kthreads can't be thawed
because device resume is blocked behind block device removal.
839a8e8660 ("writeback: replace custom worker pool implementation
with unbound workqueue") made this particular deadlock scenario more
visible but the underlying problem has always been there - the
original forker task and jbd2 are freezable too. In fact, this is
highly likely just one of many possible deadlock scenarios given that
freezer behaves as a big kernel lock and we don't have any debug
mechanism around it.
I believe the right thing to do is getting rid of freezable kthreads
and workqueues. This is something fundamentally broken. For now,
implement a funny workaround in libata - just avoid doing block device
hot[un]plug while the system is frozen. Kernel engineering at its
finest. :(
v2: Add EXPORT_SYMBOL_GPL(pm_freezing) for cases where libata is built
as a module.
v3: Comment updated and polling interval changed to 10ms as suggested
by Rafael.
v4: Add #ifdef CONFIG_FREEZER around the hack as pm_freezing is not
defined when FREEZER is not configured thus breaking build.
Reported by kbuild test robot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Tomaž Šolc <tomaz.solc@tablix.org>
Reviewed-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=62801
Link: http://lkml.kernel.org/r/20131213174932.GA27070@htj.dyndns.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
Cc: kbuild test robot <fengguang.wu@intel.com>
Pull perf fixes from Ingo Molnar:
"An ABI documentation fix, and a mixed-PMU perf-info-corruption fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Document the new transaction sample type
perf: Disable all pmus on unthrottling and rescheduling
Merge patches from Andrew Morton:
"23 fixes and a MAINTAINERS update"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (24 commits)
mm/hugetlb: check for pte NULL pointer in __page_check_address()
fix build with make 3.80
mm/mempolicy: fix !vma in new_vma_page()
MAINTAINERS: add Davidlohr as GPT maintainer
mm/memory-failure.c: recheck PageHuge() after hugetlb page migrate successfully
mm/compaction: respect ignore_skip_hint in update_pageblock_skip
mm/mempolicy: correct putback method for isolate pages if failed
mm: add missing dependency in Kconfig
sh: always link in helper functions extracted from libgcc
mm: page_alloc: exclude unreclaimable allocations from zone fairness policy
mm: numa: defer TLB flush for THP migration as long as possible
mm: numa: guarantee that tlb_flush_pending updates are visible before page table updates
mm: fix TLB flush race between migration, and change_protection_range
mm: numa: avoid unnecessary disruption of NUMA hinting during migration
mm: numa: clear numa hinting information on mprotect
sched: numa: skip inaccessible VMAs
mm: numa: avoid unnecessary work on the failure path
mm: numa: ensure anon_vma is locked to prevent parallel THP splits
mm: numa: do not clear PTE for pte_numa update
mm: numa: do not clear PMD during PTE update scan
...
There are a few subtle races, between change_protection_range (used by
mprotect and change_prot_numa) on one side, and NUMA page migration and
compaction on the other side.
The basic race is that there is a time window between when the PTE gets
made non-present (PROT_NONE or NUMA), and the TLB is flushed.
During that time, a CPU may continue writing to the page.
This is fine most of the time, however compaction or the NUMA migration
code may come in, and migrate the page away.
When that happens, the CPU may continue writing, through the cached
translation, to what is no longer the current memory location of the
process.
This only affects x86, which has a somewhat optimistic pte_accessible.
All other architectures appear to be safe, and will either always flush,
or flush whenever there is a valid mapping, even with no permissions
(SPARC).
The basic race looks like this:
CPU A CPU B CPU C
load TLB entry
make entry PTE/PMD_NUMA
fault on entry
read/write old page
start migrating page
change PTE/PMD to new page
read/write old page [*]
flush TLB
reload TLB from new entry
read/write new page
lose data
[*] the old page may belong to a new user at this point!
The obvious fix is to flush remote TLB entries, by making sure that
pte_accessible aware of the fact that PROT_NONE and PROT_NUMA memory may
still be accessible if there is a TLB flush pending for the mm.
This should fix both NUMA migration and compaction.
[mgorman@suse.de: fix build]
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Inaccessible VMA should not be trapping NUMA hint faults. Skip them.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 1b3a5d02ee ("reboot: move arch/x86 reboot= handling to generic
kernel") moved reboot= handling to generic code. In the process it also
removed the code in native_machine_shutdown() which are moving reboot
process to reboot_cpu/cpu0.
I guess that thought must have been that all reboot paths are calling
migrate_to_reboot_cpu(), so we don't need this special handling. But
kexec reboot path (kernel_kexec()) is not calling
migrate_to_reboot_cpu() so above change broke kexec. Now reboot can
happen on non-boot cpu and when INIT is sent in second kerneo to bring
up BP, it brings down the machine.
So start calling migrate_to_reboot_cpu() in kexec reboot path to avoid
this problem.
Bisected by WANG Chao.
Reported-by: Matthew Whitehead <mwhitehe@redhat.com>
Reported-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Tested-by: Baoquan He <bhe@redhat.com>
Tested-by: WANG Chao <chaowang@redhat.com>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull crypto key patches from David Howells:
"There are four items:
- A patch to fix X.509 certificate gathering. The problem was that I
was coming up with a different path for signing_key.x509 in the
build directory if it didn't exist to if it did exist. This meant
that the X.509 cert container object file would be rebuilt on the
second rebuild in a build directory and the kernel would get
relinked.
- Unconditionally remove files generated by SYSTEM_TRUSTED_KEYRING=y
when doing make mrproper.
- Actually initialise the persistent-keyring semaphore for
init_user_ns. I have no idea why this works at all for users in
the base user namespace unless it's something to do with systemd
containerising the system.
- Documentation for module signing"
* 'keys-devel' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
Add Documentation/module-signing.txt file
KEYS: fix uninitialized persistent_keyring_register_sem
KEYS: Remove files generated when SYSTEM_TRUSTED_KEYRING=y
X.509: Fix certificate gathering
Pull scheduler fixes from Ingo Molnar:
"Three fixes for scheduler crashes, each triggers in relatively rare,
hardware environment dependent situations"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Rework sched_fair time accounting
math64: Add mul_u64_u32_shr()
sched: Remove PREEMPT_NEED_RESCHED from generic code
sched: Initialize power_orig for overlapping groups
When mutex debugging is enabled and an imbalanced mutex_unlock()
is called, we get the following, slightly confusing warning:
[ 364.208284] DEBUG_LOCKS_WARN_ON(lock->owner != current)
But in that case the warning is due to an imbalanced mutex_unlock() call,
and the lock->owner is NULL - so the message is misleading.
So improve the message by testing for this case specifically:
DEBUG_LOCKS_WARN_ON(!lock->owner)
Signed-off-by: Liu, Chuansheng <chuansheng.liu@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1386136693.3650.48.camel@cliu38-desktop-build
[ Improved the changelog, changed the patch to use !lock->owner consistently. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSrhGrAAoJEHm+PkMAQRiGsNoH/jIK3CsQ2lbW7yRLXmfgtbzz
i2Kep6D4SDvmaLpLYOVC8xNYTiE8jtTbSXHomwP5wMZ63MQDhBfnEWsEWqeZ9+D9
3Q46p0QWuoBgYu2VGkoxTfygkT6hhSpwWIi3SeImbY4fg57OHiUil/+YGhORM4Qc
K4549OCTY3sIrgmWL77gzqjRUo+pQ4C73NKqZ3+5nlOmYBZC1yugk8mFwEpQkwhK
4NRNU760Fo+XIht/bINqRiPMddzC15p0mxvJy3cDW8bZa1tFSS9SB7AQUULBbcHL
+2dFlFOEb5SV1sNiNPrJ0W+h2qUh2e7kPB0F8epaBppgbwVdyQoC2u4uuLV2ZN0=
=lI2r
-----END PGP SIGNATURE-----
Merge tag 'v3.13-rc4' into core/locking
Merge Linux 3.13-rc4, to refresh this rather old tree with the latest fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The original code is as intended and was meant to scale the difference
between the NUMA_PERIOD_THRESHOLD and local/remote ratio when adjusting
the scan period. The period_slot recalculation can be dropped.
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>
Link: http://lkml.kernel.org/r/1386833006-6600-4-git-send-email-liwanp@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use wrapper function task_faults_idx to calculate index in group_faults.
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>
Link: http://lkml.kernel.org/r/1386833006-6600-3-git-send-email-liwanp@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use wrapper function task_node to get node which task is on.
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1386833006-6600-2-git-send-email-liwanp@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
commit 887c290e (sched/numa: Decide whether to favour task or group weights
based on swap candidate relationships) drop the check against
sysctl_numa_balancing_settle_count, this patch remove the sysctl.
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Link: http://lkml.kernel.org/r/1386833006-6600-1-git-send-email-liwanp@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vince Weaver reports that, on all architectures apart from ARM,
PERF_EVENT_IOC_PERIOD doesn't actually update the period until the next
event fires. This is counter-intuitive behaviour and is better dealt
with in the core code.
This patch ensures that the period is forcefully reset when dealing with
such a request in the core code. A subsequent patch removes the
equivalent hack from the ARM back-end.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1385560479-11014-1-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch touches the RT group scheduling case.
Functions inc_rt_prio_smp() and dec_rt_prio_smp() change (global) rq's
priority, while rt_rq passed to them may be not the top-level rt_rq.
This is wrong, because changing of priority on a child level does not
guarantee that the priority is the highest all over the rq. So, this
leak makes RT balancing unusable.
The short example: the task having the highest priority among all rq's
RT tasks (no one other task has the same priority) are waking on a
throttle rt_rq. The rq's cpupri is set to the task's priority
equivalent, but real rq->rt.highest_prio.curr is less.
The patch below fixes the problem.
Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/49231385567953@web4m.yandex.ru
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 42eb088e (sched: Avoid NULL dereference on sd_busy) corrected a NULL
dereference on sd_busy but the fix also altered what scheduling domain it
used for the 'sd_llc' percpu variable.
One impact of this is that a task selecting a runqueue may consider
idle CPUs that are not cache siblings as candidates for running.
Tasks are then running on CPUs that are not cache hot.
This was found through bisection where ebizzy threads were not seeing equal
performance and it looked like a scheduling fairness issue. This patch
mitigates but does not completely fix the problem on all machines tested
implying there may be an additional bug or a common root cause. Here are
the average range of performance seen by individual ebizzy threads. It
was tested on top of candidate patches related to x86 TLB range flushing.
4-core machine
3.13.0-rc3 3.13.0-rc3
vanilla fixsd-v3r3
Mean 1 0.00 ( 0.00%) 0.00 ( 0.00%)
Mean 2 0.34 ( 0.00%) 0.10 ( 70.59%)
Mean 3 1.29 ( 0.00%) 0.93 ( 27.91%)
Mean 4 7.08 ( 0.00%) 0.77 ( 89.12%)
Mean 5 193.54 ( 0.00%) 2.14 ( 98.89%)
Mean 6 151.12 ( 0.00%) 2.06 ( 98.64%)
Mean 7 115.38 ( 0.00%) 2.04 ( 98.23%)
Mean 8 108.65 ( 0.00%) 1.92 ( 98.23%)
8-core machine
Mean 1 0.00 ( 0.00%) 0.00 ( 0.00%)
Mean 2 0.40 ( 0.00%) 0.21 ( 47.50%)
Mean 3 23.73 ( 0.00%) 0.89 ( 96.25%)
Mean 4 12.79 ( 0.00%) 1.04 ( 91.87%)
Mean 5 13.08 ( 0.00%) 2.42 ( 81.50%)
Mean 6 23.21 ( 0.00%) 69.46 (-199.27%)
Mean 7 15.85 ( 0.00%) 101.72 (-541.77%)
Mean 8 109.37 ( 0.00%) 19.13 ( 82.51%)
Mean 12 124.84 ( 0.00%) 28.62 ( 77.07%)
Mean 16 113.50 ( 0.00%) 24.16 ( 78.71%)
It's eliminated for one machine and reduced for another.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: H Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20131217092124.GV11295@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, only one PMU in a context gets disabled during unthrottling
and event_sched_{out,in}(), however, events in one context may belong to
different pmus, which results in PMUs being reprogrammed while they are
still enabled.
This means that mixed PMU use [which is rare in itself] resulted in
potentially completely unreliable results: corrupted events, bogus
results, etc.
This patch temporarily disables PMUs that correspond to
each event in the context while these events are being modified.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: http://lkml.kernel.org/r/1387196256-8030-1-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Hugh reported this bug:
> CONFIG_MEMCG_SWAP is broken in 3.13-rc. Try something like this:
>
> mkdir -p /tmp/tmpfs /tmp/memcg
> mount -t tmpfs -o size=1G tmpfs /tmp/tmpfs
> mount -t cgroup -o memory memcg /tmp/memcg
> mkdir /tmp/memcg/old
> echo 512M >/tmp/memcg/old/memory.limit_in_bytes
> echo $$ >/tmp/memcg/old/tasks
> cp /dev/zero /tmp/tmpfs/zero 2>/dev/null
> echo $$ >/tmp/memcg/tasks
> rmdir /tmp/memcg/old
> sleep 1 # let rmdir work complete
> mkdir /tmp/memcg/new
> umount /tmp/tmpfs
> dmesg | grep WARNING
> rmdir /tmp/memcg/new
> umount /tmp/memcg
>
> Shows lots of WARNING: CPU: 1 PID: 1006 at kernel/res_counter.c:91
> res_counter_uncharge_locked+0x1f/0x2f()
>
> Breakage comes from 34c00c319c ("memcg: convert to use cgroup id").
>
> The lifetime of a cgroup id is different from the lifetime of the
> css id it replaced: memsw's css_get()s do nothing to hold on to the
> old cgroup id, it soon gets recycled to a new cgroup, which then
> mysteriously inherits the old's swap, without any charge for it.
Instead of removing cgroup id right after all the csses have been
offlined, we should do that after csses have been destroyed.
To make sure an invalid css pointer won't be returned after the css
is destroyed, make sure css_from_id() returns NULL in this case.
tj: Updated comment to note planned changes for cgrp->id.
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
Ftrace currently initializes only the online CPUs. This implementation has
two problems:
- If we online a CPU after we enable the function profile, and then run the
test, we will lose the trace information on that CPU.
Steps to reproduce:
# echo 0 > /sys/devices/system/cpu/cpu1/online
# cd <debugfs>/tracing/
# echo <some function name> >> set_ftrace_filter
# echo 1 > function_profile_enabled
# echo 1 > /sys/devices/system/cpu/cpu1/online
# run test
- If we offline a CPU before we enable the function profile, we will not clear
the trace information when we enable the function profile. It will trouble
the users.
Steps to reproduce:
# cd <debugfs>/tracing/
# echo <some function name> >> set_ftrace_filter
# echo 1 > function_profile_enabled
# run test
# cat trace_stat/function*
# echo 0 > /sys/devices/system/cpu/cpu1/online
# echo 0 > function_profile_enabled
# echo 1 > function_profile_enabled
# cat trace_stat/function*
# run test
# cat trace_stat/function*
So it is better that we initialize the ftrace profiler for each possible cpu
every time we enable the function profile instead of just the online ones.
Link: http://lkml.kernel.org/r/1387178401-10619-1-git-send-email-miaox@cn.fujitsu.com
Cc: stable@vger.kernel.org # 2.6.31+
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
RCU must ensure that there is the equivalent of a full memory
barrier between any memory access preceding grace period and any
memory access following that same grace period, regardless of
which CPU(s) happen to execute the two memory accesses.
Therefore, downgrading UNLOCK+LOCK to no longer imply a full
memory barrier requires some adjustments to RCU.
This commit therefore adds smp_mb__after_unlock_lock()
invocations as needed after the RCU lock acquisitions that need
to be part of a full-memory-barrier UNLOCK+LOCK.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <linux-arch@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1386799151-2219-7-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Calling cgroup_unload_subsys() from cgroup_load_subsys() after
online_css() failure will result in a NULL ptr dereference on attempt to
offline_css(), because online_css() only assigns css to cgroup on
success. Let's fix that by skipping calls to offline_css() and
css_free() in cgroup_unload_subsys() if there is no css, and freeing css
in cgroup_load_subsys() on online_css() failure.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Fix the gathering of certificates from both the source tree and the build tree
to correctly calculate the pathnames of all the certificates.
The problem was that if the default generated cert, signing_key.x509, didn't
exist then it would not have a path attached and if it did, it would have a
path attached.
This means that the contents of kernel/.x509.list would change between the
first compilation in a directory and the second. After the second it would
remain stable because the signing_key.x509 file exists.
The consequence was that the kernel would get relinked unconditionally on the
second recompilation. The second recompilation would also show something like
this:
X.509 certificate list changed
CERTS kernel/x509_certificate_list
- Including cert /home/torvalds/v2.6/linux/signing_key.x509
AS kernel/system_certificates.o
LD kernel/built-in.o
which is why the relink would happen.
Unfortunately, it isn't a simple matter of just sticking a path on the front
of the filename of the certificate in the build directory as make can't then
work out how to build it.
So the path has to be prepended to the name for sorting and duplicate
elimination and then removed for the make rule if it is in the build tree.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Function prototypes don't need to have the "extern" keyword since this
is the default behavior. Its explicit use is redundant. This commit
therefore removes them.
Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If the rcutorture SRCU output exceeds 4096 bytes, for example, if you
have more than about 75 CPUs, it will overflow the current statically
allocated buffer. This commit therefore replaces this static buffer
with a dynamically buffer whose size is based on the number of CPUs.
Benefits:
- Avoids both buffer overflow and output truncation.
- Handles an arbitrarily large number of CPUs.
- Straightforward implementation.
Shortcomings:
- Some memory is wasted:
1 cpu now comsumes 50 - 60 bytes, and this patch provides 200 bytes.
Therefore, for 1K CPUs, roughly 100KB of memory will be wasted.
However, the memory is freed immediately after printing, so this
wastage should not be a problem in practice.
Testing (Fedora16 2 CPUs, 2GB RAM x86_64):
- as module, with/without "torture_type=srcu".
- build-in not boot runnable, with/without "torture_type=srcu".
- build-in let boot runnable, with/without "torture_type=srcu".
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Whenever a CPU receives a scheduling-clock interrupt, RCU checks to see
if the RCU core needs anything from this CPU. If so, RCU raises
RCU_SOFTIRQ to carry out any needed processing.
This approach has worked well historically, but it is undesirable on
NO_HZ_FULL CPUs. Such CPUs are expected to spend almost all of their time
in userspace, so that scheduling-clock interrupts can be disabled while
there is only one runnable task on the CPU in question. Unfortunately,
raising any softirq has the potential to wake up ksoftirqd, which would
provide the second runnable task on that CPU, preventing disabling of
scheduling-clock interrupts.
What is needed instead is for RCU to leave NO_HZ_FULL CPUs alone,
relying on the grace-period kthreads' quiescent-state forcing to
do any needed RCU work on behalf of those CPUs.
This commit therefore refrains from raising RCU_SOFTIRQ on any
NO_HZ_FULL CPUs during any grace periods that have been in effect
for less than one second. The one-second limit handles the case
where an inappropriate workload is running on a NO_HZ_FULL CPU
that features lots of scheduling-clock interrupts, but no idle
or userspace time.
Reported-by: Mike Galbraith <bitbucket@online.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Mike Galbraith <bitbucket@online.de>
Toasted-by: Frederic Weisbecker <fweisbec@gmail.com>
After commit #10f39bb1b2c1 (rcu: protect __rcu_read_unlock() against
scheduler-using irq handlers), it is no longer possible to enter
the main body of rcu_read_lock_special() from an NMI, interrupt, or
softirq handler. In theory, this implies that the check for "in_irq()
|| in_serving_softirq()" must always fail, so that in theory this check
could be removed entirely.
In practice, this commit wraps this condition with a WARN_ON_ONCE().
If this warning never triggers, then the condition will be removed
entirely.
[ paulmck: And one way of triggering the WARN_ON() is if a scheduling
clock interrupt occurs in an RCU read-side critical section, setting
RCU_READ_UNLOCK_NEED_QS, which is handled by rcu_read_unlock_special().
Updated this commit to return if only that bit was set. ]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQIVAwUAUqdgihOxKuMESys7AQIishAAjGG3LnEp12fd7oay5//4SEg31ybPqGj7
Xotk9mblBW7cWPbLqk7xyIhxpIj2zM14XatEV2TfBNZV0Lcrzr1M5s87ZRUX0ui+
FHbtfn/M3Or8AvX7W1HZgG2Se7M0Ba6Y2RRXNsEdgqk6KMQuHhPEZ2FZ5vCx6BAD
vXzxWIKVNeqMXR7z6xkyqmpztnVQs+ZgzE9+c96QKyhBdtBy4spDmfgJS90m0pjN
HhgONpdfgosknj8yu43rWIQvd3UUO5BVntCeic94Fbgh77ZAEi0dD7ifLz/ebcja
pfJfPXxYzkCfIrSdAzQF8iYnQ+5rRomvGsMcvtq6mBooah/YmEkmKpKJDTp47wyN
IEUeJaxM2Qp2jcUSjEd7lY9o1AK4sj+90cKeVRUd5kzZP1iolkQHR+dGiAwqbn6w
MJBn9fCamvhpsZDhl2G/DICprFDvErd9zAlNubivggJmITnPXNWx+K1RDL4fO4qc
zLHTGHkxYyACM/7oJfwbH/NyZ1yu53OlE3R2h6TA6ISc7nAed7qzGAZyrSV92Quc
pItGaQ/zNa0sbe+nufCx9FOWu8sA3x7qnazLxhVtlPde9nlxcpGo5cagqcyc4hyp
/IGK2JoGkgHvehECY8miJlsu7UqmThIhmy6o4T4X6ErX1M9ifR92WGeXkAi/2mh/
WciVpPvTrqM=
=/AdA
-----END PGP SIGNATURE-----
Merge tag 'keys-devel-20131210' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull misc keyrings fixes from David Howells:
"These break down into five sets:
- A patch to error handling in the big_key type for huge payloads.
If the payload is larger than the "low limit" and the backing store
allocation fails, then big_key_instantiate() doesn't clear the
payload pointers in the key, assuming them to have been previously
cleared - but only one of them is.
Unfortunately, the garbage collector still calls big_key_destroy()
when sees one of the pointers with a weird value in it (and not
NULL) which it then tries to clean up.
- Three patches to fix the keyring type:
* A patch to fix the hash function to correctly divide keyrings off
from keys in the topology of the tree inside the associative
array. This is only a problem if searching through nested
keyrings - and only if the hash function incorrectly puts the a
keyring outside of the 0 branch of the root node.
* A patch to fix keyrings' use of the associative array. The
__key_link_begin() function initially passes a NULL key pointer
to assoc_array_insert() on the basis that it's holding a place in
the tree whilst it does more allocation and stuff.
This is only a problem when a node contains 16 keys that match at
that level and we want to add an also matching 17th. This should
easily be manufactured with a keyring full of keyrings (without
chucking any other sort of key into the mix) - except for (a)
above which makes it on average adding the 65th keyring.
* A patch to fix searching down through nested keyrings, where any
keyring in the set has more than 16 keyrings and none of the
first keyrings we look through has a match (before the tree
iteration needs to step to a more distal node).
Test in keyutils test suite:
http://git.kernel.org/cgit/linux/kernel/git/dhowells/keyutils.git/commit/?id=8b4ae963ed92523aea18dfbb8cab3f4979e13bd1
- A patch to fix the big_key type's use of a shmem file as its
backing store causing audit messages and LSM check failures. This
is done by setting S_PRIVATE on the file to avoid LSM checks on the
file (access to the shmem file goes through the keyctl() interface
and so is gated by the LSM that way).
This isn't normally a problem if a key is used by the context that
generated it - and it's currently only used by libkrb5.
Test in keyutils test suite:
http://git.kernel.org/cgit/linux/kernel/git/dhowells/keyutils.git/commit/?id=d9a53cbab42c293962f2f78f7190253fc73bd32e
- A patch to add a generated file to .gitignore.
- A patch to fix the alignment of the system certificate data such
that it it works on s390. As I understand it, on the S390 arch,
symbols must be 2-byte aligned because loading the address discards
the least-significant bit"
* tag 'keys-devel-20131210' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
KEYS: correct alignment of system_certificate_list content in assembly file
Ignore generated file kernel/x509_certificate_list
security: shmem: implement kernel private shmem inodes
KEYS: Fix searching of nested keyrings
KEYS: Fix multiple key add into associative array
KEYS: Fix the keyring hash function
KEYS: Pre-clear struct key on allocation
When debugging the read-only hugepage case, I was confused by the fact
that get_futex_key() did an access_ok() only for the non-shared futex
case, since the user address checking really isn't in any way specific
to the private key handling.
Now, it turns out that the shared key handling does effectively do the
equivalent checks inside get_user_pages_fast() (it doesn't actually
check the address range on x86, but does check the page protections for
being a user page). So it wasn't actually a bug, but the fact that we
treat the address differently for private and shared futexes threw me
for a loop.
Just move the check up, so that it gets done for both cases. Also, use
the 'rw' parameter for the type, even if it doesn't actually matter any
more (it's a historical artifact of the old racy i386 "page faults from
kernel space don't check write protections").
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The hugepage code had the exact same bug that regular pages had in
commit 7485d0d375 ("futexes: Remove rw parameter from
get_futex_key()").
The regular page case was fixed by commit 9ea71503a8 ("futex: Fix
regression with read only mappings"), but the transparent hugepage case
(added in a5b338f2b0b1: "thp: update futex compound knowledge") case
remained broken.
Found by Dave Jones and his trinity tool.
Reported-and-tested-by: Dave Jones <davej@fedoraproject.org>
Cc: stable@kernel.org # v2.6.38+
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the missing unlock before return from function cgroup_load_subsys()
in the error handling case.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Remove a full barrier from the ring-buffer write path by relying on
a control dependency to order a LOAD -> STORE scenario.
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-8alv40z6ikk57jzbaobnxrjl@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Christian suffers from a bad BIOS that wrecks his i5's TSC sync. This
results in him occasionally seeing time going backwards - which
crashes the scheduler ...
Most of our time accounting can actually handle that except the most
common one; the tick time update of sched_fair.
There is a further problem with that code; previously we assumed that
because we get a tick every TICK_NSEC our time delta could never
exceed 32bits and math was simpler.
However, ever since Frederic managed to get NO_HZ_FULL merged; this is
no longer the case since now a task can run for a long time indeed
without getting a tick. It only takes about ~4.2 seconds to overflow
our u32 in nanoseconds.
This means we not only need to better deal with time going backwards;
but also means we need to be able to deal with large deltas.
This patch reworks the entire code and uses mul_u64_u32_shr() as
proposed by Andy a long while ago.
We express our virtual time scale factor in a u32 multiplier and shift
right and the 32bit mul_u64_u32_shr() implementation reduces to a
single 32x32->64 multiply if the time delta is still short (common
case).
For 64bit a 64x64->128 multiply can be used if ARCH_SUPPORTS_INT128.
Reported-and-Tested-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: fweisbec@gmail.com
Cc: Paul Turner <pjt@google.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20131118172706.GI3866@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Yinghai reported that he saw a /0 in sg_capacity on his EX parts.
Make sure to always initialize power_orig now that we actually use it.
Ideally build_sched_domains() -> init_sched_groups_power() would also
initialize this; but for some yet unexplained reason some setups seem
to miss updates there.
Reported-by: Yinghai Lu <yinghai@kernel.org>
Tested-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-l8ng2m9uml6fhibln8wqpom7@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Apart from data-type specific alignment constraints, there are also
architecture-specific alignment requirements.
For example, on s390 symbols must be on even addresses implying a 2-byte
alignment. If the system_certificate_list_end symbol is on an odd address
and if this address is loaded, the least-significant bit is ignored. As a
result, the load_system_certificate_list() fails to load the certificates
because of a wrong certificate length calculation.
To be safe, align system_certificate_list on an 8-byte boundary. Also improve
the length calculation of the system_certificate_list content. Introduce a
system_certificate_list_size (8-byte aligned because of unsigned long) variable
that stores the length. Let the linker calculate this size by introducing
a start and end label for the certificate content.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: David Howells <dhowells@redhat.com>
$ git status
# On branch pending-rebases
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
#
# kernel/x509_certificate_list
nothing added to commit but untracked files present (use "git add" to track)
$
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David Howells <dhowells@redhat.com>
Currently blocking in an RCU callback function will result in
"scheduling while atomic", which could be triggered for any number
of reasons. To aid debugging, this patch introduces a rcu_callback_map
that is used to tie the inappropriate voluntary context switch back
to the fact that the function is being invoked from within a callback.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit documents the memory-barrier guarantees provided by
synchronize_srcu() and call_srcu().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Each element of the rcu_state structure's ->levelspread[] array
is intended to contain the per-level fanout, where the zero-th
element corresponds to the root of the rcu_node tree, and the last
element corresponds to the leaves. In the CONFIG_RCU_FANOUT_EXACT
case, this means that the last element should be filled in
from CONFIG_RCU_FANOUT_LEAF (or from the rcu_fanout_leaf boot
parameter, if provided) and that the remaining elements should
be filled in from CONFIG_RCU_FANOUT. Unfortunately, the current
code in rcu_init_levelspread() takes the opposite approach, placing
CONFIG_RCU_FANOUT_LEAF in the zero-th element and CONFIG_RCU_FANOUT in
the remaining elements.
For typical power-of-two values, this generates odd but functional
rcu_node trees. However, other values, for example CONFIG_RCU_FANOUT=3
and CONFIG_RCU_FANOUT_LEAF=2, generate trees that can leave some CPUs
out of the grace-period computation, resulting in too-short grace periods
and therefore a broken RCU implementation.
This commit therefore fixes rcu_init_levelspread() to set the last
->levelspread[] array element from CONFIG_RCU_FANOUT_LEAF and the
remaining elements from CONFIG_RCU_FANOUT, thus generating the
intended rcu_node trees.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit fixes the following coccinelle warning:
kernel/rcu/tree.c:712:9-10: WARNING: return of 0/1 in function
'rcu_lockdep_current_cpu_online' with return type bool
Return statements in functions returning bool should use
true/false instead of 1/0.
Generated by: coccinelle/misc/boolreturn.cocci
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The posix cpu timers code makes a heavy use of BUG_ON()
but none of these concern fatal issues that require
to stop the machine. So let's just warn the user when
some internal state slips out of our hands.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
The remaining uses of tasklist_lock were mostly about synchronizing
against sighand modifications, getting coherent and safe group samples
and also thread/process wide timers list handling.
All of this is already safely synchronizable with the target's
sighand lock. Let's use it on these places instead.
Also update the comments about locking.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Timer deletion doesn't need the tasklist lock.
We need to protect against:
* concurrent access to the lists p->cputime_expires and
p->sighand->cputime_expires
* task reaping that may also delete the timer list entry
* timer firing
We already hold the timer lock which protects us against concurrent
timer firing.
The rest only need the targets sighand to be locked.
So hold it and drop the use of tasklist_lock there.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
There is no need for the tasklist_lock just to take a process
wide clock sample.
All we need is to get a coherent sample that doesn't race with
exit() and exec():
* exit() may be concurrently reaping a task and flushing its time
* sighand is unstable under exit() and exec(), and the latter also
result in group leader that can change
To protect against these, locking the target's sighand is enough.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Consolidate the clock sampling common code used for both local
and remote targets.
Note that this introduces a tiny user ABI change: if a
PID is passed to clock_gettime() along the clockid,
we used to forbid a process wide clock sample when that
PID doesn't belong to a group leader. Now after this patch
we allow process wide clock samples if that PID belongs to
the current task, even if the current task is not the
group leader.
But local process wide clock samples are allowed if PID == 0
(current task) even if the current task is not the group leader.
So in the end this should be no big deal as this actually harmonize
the behaviour when the remote sample is actually a local one.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Now that we've removed all the optimizations that could
result in NULL timer's targets, we can remove all the
associated special case handling.
Also add some warnings on NULL targets to spot any possible
leftover.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
When a timer's target is seen to be buried, for example on calls
to timer_gettime(), the posix cpu timers code behaves a bit
like a garbage collector and releases early the reference to the
task.
Then again, this optimization complicates the code for no much
value: it's up to the user to release the timer and its associated
ressources by calling timer_delete() after it buries the target
tasks.
Remove this to simplify the code.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Now that we removed dead thread posix cpu timers caching,
lets remove the dead process wide version. This caching
is similar to the per thread version but it should be even
more rare:
* If the process id dead, we are not reading its timers
status from a thread belonging to its group since they
are all dead. So this caching only concern remote process
timers reads. Now posix cpu timers using itimers or timer_settime()
can't do remote process timers anyway so it's not even clear if there
is actually a user for this caching.
* Unlike per thread timers caching, this only applies to
zombies targets. Buried targets' process wide timers return
0 values. But then again, timer_gettime() can't read remote
process timers, so if the process is dead, there can't be
any reader left anyway.
Then again this caching seem to complicate the code for
corner cases that are probably not worth it. So lets get
rid of it.
Also remove the sample snapshot on dying process timer
that is now useless, as suggested by Kosaki.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
When a task is exiting or has exited, its posix cpu timers
don't tick anymore and won't elapse further. It's too late
for them to expire.
So any further call to timer_gettime() on these timers will
return the same remaining expiry time.
The current code optimize this by caching the remaining delta
and storing it where we use to save the absolute expiration time.
This way, the future calls to timer_gettime() won't need to
compute the difference between the absolute expiration time and
the current time anymore.
Now this optimization doesn't seem to bring much value. Computing
the timer remaining delta is not very costly. Fetching the timer
value OTOH can be costly in two ways:
* CPUCLOCK_SCHED read requires to lock the target's rq. But some
optimizations are on the way to make task_sched_runtime() not holding
the rq lock of a non-running target.
* CPUCLOCK_VIRT/CPUCLOCK_PROF read simply consist in fetching
current->utime/current->stime except when the system uses full
dynticks cputime accounting. The latter requires a per task lock
in order to correctly compute user and system time. But once the
target is dead, this lock shouldn't be contended anyway.
All in one this caching doesn't seem to be justified.
Given that it complicates the code significantly for
few wins, let's remove it on single thread timers.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Add a flag to tell the PCI subsystem that kernel is shutting down in
preparation to kexec a kernel. Add code in PCI subsystem to use this flag
to clear Bus Master bit on PCI devices only in case of kexec reboot.
This fixes a power-off problem on Acer Aspire V5-573G and likely other
machines and avoids any other issues caused by clearing Bus Master bit on
PCI devices in normal shutdown path. The problem was introduced by
b566a22c23 ("PCI: disable Bus Master on PCI device shutdown").
This patch is based on discussion at
http://marc.info/?l=linux-pci&m=138425645204355&w=2
Link: https://bugzilla.kernel.org/show_bug.cgi?id=63861
Reported-by: Chang Liu <cl91tp@gmail.com>
Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: stable@vger.kernel.org # v3.5+
After the previous patch which introduced for_each_css(),
for_each_root_subsys() only has two users left. This patch replaces
it with for_each_subsys() + explicit subsys_mask testing and remove
for_each_root_subsys() along with cgroupfs_root->subsys_list handling.
This patch doesn't introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
There are enough places where css's of a cgroup are iterated, which
currently uses for_each_root_subsys() + explicit cgroup_css(). This
patch implements for_each_css() and replaces the above combination
with it.
This patch doesn't introduce any behavior changes.
v2: Updated to apply cleanly on top of v2 of "cgroup: fix css leaks on
online_css() failure"
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Now that all opertations to create a css (cgroup_subsys_state) are
collected into a single loop in cgroup_create(), it's easy to factor
it out into its own function. Factor out css creation into
create_css(). This makes the code easier to follow and will enable
decoupling css creation from cgroup creation which is necessary for
the planned unified hierarchy.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Now that css operations in cgroup_create() are back-to-back, there
isn't much point in allocating css's in one loop and onlining them in
another. Merge the two loops so that a css is allocated and onlined
on each iteration.
css_ar[] is no longer necessary and replaced with a single pointer.
This also simplifies the error handling path.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup_create() currently does the followings.
1. alloc cgroup
2. alloc css's
3. create the directory and commit to cgroup creation
4. online css's
5. create cgroup and css files
The sequence performs allocations before other operations but it
doesn't buy anything because each of the above steps may fail and
should be unrollable. Reorganize the sequence such that cgroup
operations are done before css operations.
1. alloc cgroup
2. create the directory and files and commit to cgroup creation
3. alloc css's
4. create files for and online css's
This simplifies the code a bit and enables further simplification and
separating out css creation from cgroup creation which is necessary
for the planned unified hierarchy where css's will be created and
destroyed dynamically across the lifetime of a cgroup.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
We want to use for_each_subsys() in cgroupfs_root handling where only
cgroup_root_mutex is held. The only way cgroup_subsys[] can change is
through module load/unload, make cgroup_[un]load_subsys() grab
cgroup_root_mutex too and update the lockdep annotation in
for_each_subsys() to allow either cgroup_mutex or cgroup_root_mutex.
* Lockdep annotation is moved from inner 'if' condition to outer 'for'
init caluse. There's no reason to execute the assertion every loop.
* Loop index @i is renamed to @ssid. Indices iterating through subsys
will be [re]named to @ssid gradually.
v2: cgroup_assert_mutex_or_root_locked() caused build failure if
!CONFIG_LOCKEDP. Conditionalize its definition. The build failure
was reported by kbuild test bot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: kbuild test robot <fengguang.wu@intel.com>
Currently, all css iterations and css_from_dir() require RCU read lock
whether the caller is holding cgroup_mutex or not, which is
unnecessarily restrictive. They are all safe to use under
cgroup_mutex without holding RCU read lock.
Factor out cgroup_assert_mutex_or_rcu_locked() from css_from_id() and
apply it to all css iteration functions and css_from_dir().
v2: cgroup_assert_mutex_or_rcu_locked() definition doesn't need to be
inside CONFIG_PROVE_RCU ifdef as rcu_lockdep_assert() is always
defined and conditionalized. Move it outside of the ifdef block.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Pulling in as patches depending on 266ccd505e ("cgroup: fix
cgroup_create() error handling path") are scheduled.
Signed-off-by: Tejun Heo <tj@kernel.org>
ae7f164a09 ("cgroup: move cgroup->subsys[] assignment to
online_css()") moved cgroup->subsys[] assignements later in
cgroup_create() but didn't update error handling path accordingly
leading to the following oops and leaking later css's after an
online_css() failure. The oops is from cgroup destruction path being
invoked on the partially constructed cgroup which is not ready to
handle empty slots in cgrp->subsys[] array.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: [<ffffffff810eeaa8>] cgroup_destroy_locked+0x118/0x2f0
PGD a780a067 PUD aadbe067 PMD 0
Oops: 0000 [#1] SMP
Modules linked in:
CPU: 6 PID: 7360 Comm: mkdir Not tainted 3.13.0-rc2+ #69
Hardware name:
task: ffff8800b9dbec00 ti: ffff8800a781a000 task.ti: ffff8800a781a000
RIP: 0010:[<ffffffff810eeaa8>] [<ffffffff810eeaa8>] cgroup_destroy_locked+0x118/0x2f0
RSP: 0018:ffff8800a781bd98 EFLAGS: 00010282
RAX: ffff880586903878 RBX: ffff880586903800 RCX: ffff880586903820
RDX: ffff880586903860 RSI: ffff8800a781bdb0 RDI: ffff880586903820
RBP: ffff8800a781bde8 R08: ffff88060e0b8048 R09: ffffffff811d7bc1
R10: 000000000000008c R11: 0000000000000001 R12: ffff8800a72286c0
R13: 0000000000000000 R14: ffffffff81cf7a40 R15: 0000000000000001
FS: 00007f60ecda57a0(0000) GS:ffff8806272c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 00000000a7a03000 CR4: 00000000000007e0
Stack:
ffff880586903860 ffff880586903910 ffff8800a72286c0 ffff880586903820
ffffffff81cf7a40 ffff880586903800 ffff88060e0b8018 ffffffff81cf7a40
ffff8800b9dbec00 ffff8800b9dbf098 ffff8800a781bec8 ffffffff810ef5bf
Call Trace:
[<ffffffff810ef5bf>] cgroup_mkdir+0x55f/0x5f0
[<ffffffff811c90ae>] vfs_mkdir+0xee/0x140
[<ffffffff811cb07e>] SyS_mkdirat+0x6e/0xf0
[<ffffffff811c6a19>] SyS_mkdir+0x19/0x20
[<ffffffff8169e569>] system_call_fastpath+0x16/0x1b
This patch moves reference bumping inside online_css() loop, clears
css_ar[] as css's are brought online successfully, and updates
err_destroy path so that either a css is fully online and destroyed by
cgroup_destroy_locked() or the error path frees it. This creates a
duplicate css free logic in the error path but it will be cleaned up
soon.
v2: Li pointed out that cgroup_destroy_locked() would do NULL-deref if
invoked with a cgroup which doesn't have all css's populated.
Update cgroup_destroy_locked() so that it skips NULL css's.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Reported-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: stable@vger.kernel.org # v3.12+
all events. This was prevalent when FTRACE_SELFTEST was enabled which
enables all events several times, and caused the system bootup to
pause for over a minute.
This was tracked down to an addition of a synchronize_sched() performed
when system call tracepoints are unregistered.
The synchronize_sched() is needed between the unregistering of the
system call tracepoint and a deletion of a tracing instance buffer.
But placing the synchronize_sched() in the unreg of *every* system call
tracepoint is a bit overboard. A single synchronize_sched() before
the deletion of the instance is sufficient.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSofYNAAoJEKQekfcNnQGuTUcIAJOx8745KlkFjN4VX+nCWNfP
xrrpnLBymbGMA9lQ4fXk+kdiuhH8DjRYdKq9fU4T481MFYKkToUIZH6NeaLI5fr1
0nBPPjVyAlJ+yt9JbOAYa1jEYnAr27ORDHEtdQnqb6OJSky3oh9jCQi+toxmh2qX
Sv1tIYeAf3K2V/h5xt6uSl9oiZ6KBtwE3f+xkHWNizaU9i2rq2gxd77fSbPNTIps
wLdsESYziA2UeAm13eh8xXo1uqRbfvx7bPr59cu0+3AqdOoaXFG+JoE/MqmljIO5
HkyCKJVqP8HD+QieuEB+hw4zpSsl6A6iKSlaiHm8NMnRRocfM6qMKMQXQ28KhxA=
=sYm/
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"A regression showed up that there's a large delay when enabling all
events. This was prevalent when FTRACE_SELFTEST was enabled which
enables all events several times, and caused the system bootup to
pause for over a minute.
This was tracked down to an addition of a synchronize_sched()
performed when system call tracepoints are unregistered.
The synchronize_sched() is needed between the unregistering of the
system call tracepoint and a deletion of a tracing instance buffer.
But placing the synchronize_sched() in the unreg of *every* system
call tracepoint is a bit overboard. A single synchronize_sched()
before the deletion of the instance is sufficient"
* tag 'trace-fixes-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Only run synchronize_sched() at instance deletion time
It has been reported that boot up with FTRACE_SELFTEST enabled can take a
very long time. There can be stalls of over a minute.
This was tracked down to the synchronize_sched() called when a system call
event is disabled. As the self tests enable and disable thousands of events,
this makes the synchronize_sched() get called thousands of times.
The synchornize_sched() was added with d562aff93b "tracing: Add support
for SOFT_DISABLE to syscall events" which caused this regression (added
in 3.13-rc1).
The synchronize_sched() is to protect against the events being accessed
when a tracer instance is being deleted. When an instance is being deleted
all the events associated to it are unregistered. The synchronize_sched()
makes sure that no more users are running when it finishes.
Instead of calling synchronize_sched() for all syscall events, we only
need to call it once, after the events are unregistered and before the
instance is deleted. The event_mutex is held during this action to
prevent new users from enabling events.
Link: http://lkml.kernel.org/r/20131203124120.427b9661@gandalf.local.home
Reported-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Petr Mladek <pmladek@suse.cz>
Tested-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In preparation of conversion to kernfs, cgroup file handling is
updated so that it can be easily mapped to kernfs. With the previous
changes, the difference between pidlist and other files are very
small. Both are served by seq_file in a pretty standard way with the
only difference being !pidlist files use single_open().
This patch adds cftype->seq_start(), ->seq_next and ->seq_stop() and
implements the matching cgroup_seqfile_start/next/stop() which either
emulates single_open() behavior or invokes cftype->seq_*() operations
if specified. This allows using single seq_operations for both
pidlist and other files and makes cgroup_pidlist_operations and
cgorup_pidlist_open() no longer necessary. As cgroup_pidlist_open()
was the only user of cftype->open(), the method is dropped together.
This brings cftype file interface very close to kernfs interface and
mapping shouldn't be too difficult. Once converted to kernfs, most of
the plumbing code including cgroup_seqfile_*() will be removed as
kernfs provides those facilities.
This patch does not introduce any behavior changes.
v2: Refreshed on top of the updated "cgroup: introduce struct
cgroup_pidlist_open_file".
v3: Refreshed on top of the updated "cgroup: attach cgroup_open_file
to all cgroup files".
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
In preparation of conversion to kernfs, cgroup file handling is
updated so that it can be easily mapped to kernfs. This patch
replaces cftype->read_seq_string() with cftype->seq_show() which is
not limited to single_open() operation and will map directcly to
kernfs seq_file interface.
The conversions are mechanical. As ->seq_show() doesn't have @css and
@cft, the functions which make use of them are converted to use
seq_css() and seq_cft() respectively. In several occassions, e.f. if
it has seq_string in its name, the function name is updated to fit the
new method better.
This patch does not introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
In preparation of conversion to kernfs, cgroup file handling is
updated so that it can be easily mapped to kernfs. This patch
attaches cgroup_open_file, which used to be attached to pidlist files,
to all cgroup files, introduces seq_css/cft() accessors to determine
the cgroup_subsys_state and cftype associated with a given cgroup
seq_file, exports them as public interface.
This doesn't cause any behavior changes but unifies cgroup file
handling across different file types and will help converting them to
kernfs seq_show() interface.
v2: Li pointed out that the original patch was using
single_open_size() incorrectly assuming that the size param is
private data size. Fix it by allocating @of separately and
passing it to single_open() and explicitly freeing it in the
release path. This isn't the prettiest but this path is gonna be
restructured by the following patches pretty soon.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
In preparation of conversion to kernfs, cgroup file handling is
updated so that it can be easily mapped to kernfs. This patch renames
cgroup_pidlist_open_file to cgroup_open_file and updates it so that it
only contains a field to identify the specific file, ->cfe, and an
opaque ->priv pointer. When cgroup is converted to kernfs, this will
be replaced by kernfs_open_file which contains about the same
information.
As whether the file is "cgroup.procs" or "tasks" should now be
determined from cgroup_open_file->cfe, the cftype->private for the two
files now carry the file type and cgroup_pidlist_start() reads the
type through cfe->type->private. This makes the distinction between
cgroup_tasks_open() and cgroup_procs_open() unnecessary.
cgroup_pidlist_open() is now directly used as the open method.
This patch doesn't make any behavior changes.
v2: Refreshed on top of the updated "cgroup: introduce struct
cgroup_pidlist_open_file".
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
With the recent removal of cftype->read() and ->read_map(), only three
operations are remaining, ->read_u64(), ->read_s64() and
->read_seq_string(). Currently, the first two are handled directly
while the last is handled through seq_file.
It is trivial to serve the first two through the seq_file path too.
This patch restructures read path so that all operations are served
through cgroup_seqfile_show(). This makes all cgroup files seq_file -
single_open/release() are now used by default,
cgroup_seqfile_operations is dropped, and cgroup_file_operations uses
seq_read() for read.
This simplifies the code and makes the read path easy to convert to
use kernfs.
Note that, while cgroup_file_operations uses seq_read() for read, it
still uses generic_file_llseek() for seeking instead of seq_lseek().
This is different from cgroup_seqfile_operations but shouldn't break
anything and brings the seeking behavior aligned with kernfs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup_write_X64() and cgroup_write_string() both implement about the
same buffering logic. Unify the two into cgroup_file_write() which
always allocates dynamic buffer for simplicity and uses kstrto*()
instead of simple_strto*().
This patch doesn't make any visible behavior changes except for
possibly different error value from kstrsto*().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
In preparation of conversion to kernfs, cgroup file handling is being
consolidated so that it can be easily mapped to the seq_file based
interface of kernfs.
After recent updates, ->read() and ->read_map() don't have any user
left and ->write() never had any user. Remove them.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
In preparation of conversion to kernfs, cgroup file handling is being
consolidated so that it can be easily mapped to the seq_file based
interface of kernfs.
All users of cftype->read() can be easily served, usually better, by
seq_file and other methods. Rename cpuset_common_file_read() to
cpuset_common_read_seq_string() and convert it to use
read_seq_string() interface instead. This not only simplifies the
code but also makes it more versatile. Before, the file couldn't
output if the result is longer than PAGE_SIZE. After the conversion,
seq_file automatically grows the buffer until the output can fit.
This patch doesn't make any visible behavior changes except for being
able to handle output larger than PAGE_SIZE.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
In preparation of conversion to kernfs, cgroup file handling is being
consolidated so that it can be easily mapped to the seq_file based
interface of kernfs.
cftype->read_map() doesn't add any value and being replaced with
->read_seq_string(). Update cpu_stats_show() and cpuacct_stats_show()
accordingly.
This patch doesn't make any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
A kernel with enabled lockdep complains about the wrong usage of
rcu_dereference() under a rcu_read_lock_bh() protected region.
===============================
[ INFO: suspicious RCU usage. ]
3.13.0-rc1+ #126 Not tainted
-------------------------------
linux/kernel/padata.c:115 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 1
1 lock held by cryptomgr_test/153:
#0: (rcu_read_lock_bh){.+....}, at: [<ffffffff8115c235>] padata_do_parallel+0x5/0x270
Fix that by using rcu_dereference_bh() instead.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull timer fixes from Thomas Gleixner:
- timekeeping: Cure a subtle drift issue on GENERIC_TIME_VSYSCALL_OLD
- nohz: Make CONFIG_NO_HZ=n and nohz=off command line option behave the
same way. Fixes a long standing load accounting wreckage.
- clocksource/ARM: Kconfig update to avoid ARM=n wreckage
- clocksource/ARM: Fixlets for the AT91 and SH clocksource/clockevents
- Trivial documentation update and kzalloc conversion from akpms pile
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
nohz: Fix another inconsistency between CONFIG_NO_HZ=n and nohz=off
time: Fix 1ns/tick drift w/ GENERIC_TIME_VSYSCALL_OLD
clocksource: arm_arch_timer: Hide eventstream Kconfig on non-ARM
clocksource: sh_tmu: Add clk_prepare/unprepare support
clocksource: sh_tmu: Release clock when sh_tmu_register() fails
clocksource: sh_mtu2: Add clk_prepare/unprepare support
clocksource: sh_mtu2: Release clock when sh_mtu2_register() fails
ARM: at91: rm9200: switch back to clockevents_config_and_register
tick: Document tick_do_timer_cpu
timer: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node(...)
NOHZ: Check for nohz active instead of nohz enabled
Pull dynticks updates from Frederic Weisbecker:
* Fix a bug where posix cpu timers requeued due to interval got ignored on full
dynticks CPUs (not a regression though as it only impacts full dynticks and the
bug is there since we merged full dynticks).
* Optimizations and cleanups on the use of per CPU APIs to improve code readability,
performance and debuggability in the nohz subsystem;
* Optimize posix cpu timer by sparing stub workqueue queue with full dynticks off case
* Rename some functions to extend with *_this_cpu() suffix for clarity
* Refine the naming of some context tracking subsystem state accessors
* Trivial spelling fix by Paul Gortmaker
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are repeating the functionality of kstrtol in param_set_long, and the
same for kstrtoint. We can get rid of the extra code by using the right
functions.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Some RCU bugs have been specific to the layout of the rcu_node tree,
but RCU will silently adjust the tree at boot time if appropriate.
This obscures valuable debugging information, so print a message when
this happens.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The srcu_barrier() docbook header left out the "sp" argument, so this
commit adds that argument's docbook text.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The current task-level idle entry/exit code forces an entry/exit on
each call, regardless of the nesting level. This commit therefore
properly accounts for nesting.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Dave Jones got the following lockdep splat:
> ======================================================
> [ INFO: possible circular locking dependency detected ]
> 3.12.0-rc3+ #92 Not tainted
> -------------------------------------------------------
> trinity-child2/15191 is trying to acquire lock:
> (&rdp->nocb_wq){......}, at: [<ffffffff8108ff43>] __wake_up+0x23/0x50
>
> but task is already holding lock:
> (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230
>
> which lock already depends on the new lock.
>
>
> the existing dependency chain (in reverse order) is:
>
> -> #3 (&ctx->lock){-.-...}:
> [<ffffffff810cc243>] lock_acquire+0x93/0x200
> [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80
> [<ffffffff811500ff>] __perf_event_task_sched_out+0x2df/0x5e0
> [<ffffffff81091b83>] perf_event_task_sched_out+0x93/0xa0
> [<ffffffff81732052>] __schedule+0x1d2/0xa20
> [<ffffffff81732f30>] preempt_schedule_irq+0x50/0xb0
> [<ffffffff817352b6>] retint_kernel+0x26/0x30
> [<ffffffff813eed04>] tty_flip_buffer_push+0x34/0x50
> [<ffffffff813f0504>] pty_write+0x54/0x60
> [<ffffffff813e900d>] n_tty_write+0x32d/0x4e0
> [<ffffffff813e5838>] tty_write+0x158/0x2d0
> [<ffffffff811c4850>] vfs_write+0xc0/0x1f0
> [<ffffffff811c52cc>] SyS_write+0x4c/0xa0
> [<ffffffff8173d4e4>] tracesys+0xdd/0xe2
>
> -> #2 (&rq->lock){-.-.-.}:
> [<ffffffff810cc243>] lock_acquire+0x93/0x200
> [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80
> [<ffffffff810980b2>] wake_up_new_task+0xc2/0x2e0
> [<ffffffff81054336>] do_fork+0x126/0x460
> [<ffffffff81054696>] kernel_thread+0x26/0x30
> [<ffffffff8171ff93>] rest_init+0x23/0x140
> [<ffffffff81ee1e4b>] start_kernel+0x3f6/0x403
> [<ffffffff81ee1571>] x86_64_start_reservations+0x2a/0x2c
> [<ffffffff81ee1664>] x86_64_start_kernel+0xf1/0xf4
>
> -> #1 (&p->pi_lock){-.-.-.}:
> [<ffffffff810cc243>] lock_acquire+0x93/0x200
> [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90
> [<ffffffff810979d1>] try_to_wake_up+0x31/0x350
> [<ffffffff81097d62>] default_wake_function+0x12/0x20
> [<ffffffff81084af8>] autoremove_wake_function+0x18/0x40
> [<ffffffff8108ea38>] __wake_up_common+0x58/0x90
> [<ffffffff8108ff59>] __wake_up+0x39/0x50
> [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0
> [<ffffffff81111450>] __call_rcu+0x140/0x820
> [<ffffffff81111b8d>] call_rcu+0x1d/0x20
> [<ffffffff81093697>] cpu_attach_domain+0x287/0x360
> [<ffffffff81099d7e>] build_sched_domains+0xe5e/0x10a0
> [<ffffffff81efa7fc>] sched_init_smp+0x3b7/0x47a
> [<ffffffff81ee1f4e>] kernel_init_freeable+0xf6/0x202
> [<ffffffff817200be>] kernel_init+0xe/0x190
> [<ffffffff8173d22c>] ret_from_fork+0x7c/0xb0
>
> -> #0 (&rdp->nocb_wq){......}:
> [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0
> [<ffffffff810cc243>] lock_acquire+0x93/0x200
> [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90
> [<ffffffff8108ff43>] __wake_up+0x23/0x50
> [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0
> [<ffffffff81111450>] __call_rcu+0x140/0x820
> [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30
> [<ffffffff81149abf>] put_ctx+0x4f/0x70
> [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230
> [<ffffffff81056b8d>] do_exit+0x30d/0xcc0
> [<ffffffff8105893c>] do_group_exit+0x4c/0xc0
> [<ffffffff810589c4>] SyS_exit_group+0x14/0x20
> [<ffffffff8173d4e4>] tracesys+0xdd/0xe2
>
> other info that might help us debug this:
>
> Chain exists of:
> &rdp->nocb_wq --> &rq->lock --> &ctx->lock
>
> Possible unsafe locking scenario:
>
> CPU0 CPU1
> ---- ----
> lock(&ctx->lock);
> lock(&rq->lock);
> lock(&ctx->lock);
> lock(&rdp->nocb_wq);
>
> *** DEADLOCK ***
>
> 1 lock held by trinity-child2/15191:
> #0: (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230
>
> stack backtrace:
> CPU: 2 PID: 15191 Comm: trinity-child2 Not tainted 3.12.0-rc3+ #92
> ffffffff82565b70 ffff880070c2dbf8 ffffffff8172a363 ffffffff824edf40
> ffff880070c2dc38 ffffffff81726741 ffff880070c2dc90 ffff88022383b1c0
> ffff88022383aac0 0000000000000000 ffff88022383b188 ffff88022383b1c0
> Call Trace:
> [<ffffffff8172a363>] dump_stack+0x4e/0x82
> [<ffffffff81726741>] print_circular_bug+0x200/0x20f
> [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0
> [<ffffffff810c6439>] ? get_lock_stats+0x19/0x60
> [<ffffffff8100b2f4>] ? native_sched_clock+0x24/0x80
> [<ffffffff810cc243>] lock_acquire+0x93/0x200
> [<ffffffff8108ff43>] ? __wake_up+0x23/0x50
> [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90
> [<ffffffff8108ff43>] ? __wake_up+0x23/0x50
> [<ffffffff8108ff43>] __wake_up+0x23/0x50
> [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0
> [<ffffffff81111450>] __call_rcu+0x140/0x820
> [<ffffffff8109bc8f>] ? local_clock+0x3f/0x50
> [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30
> [<ffffffff81149abf>] put_ctx+0x4f/0x70
> [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230
> [<ffffffff81056b8d>] do_exit+0x30d/0xcc0
> [<ffffffff810c9af5>] ? trace_hardirqs_on_caller+0x115/0x1e0
> [<ffffffff810c9bcd>] ? trace_hardirqs_on+0xd/0x10
> [<ffffffff8105893c>] do_group_exit+0x4c/0xc0
> [<ffffffff810589c4>] SyS_exit_group+0x14/0x20
> [<ffffffff8173d4e4>] tracesys+0xdd/0xe2
The underlying problem is that perf is invoking call_rcu() with the
scheduler locks held, but in NOCB mode, call_rcu() will with high
probability invoke the scheduler -- which just might want to use its
locks. The reason that call_rcu() needs to invoke the scheduler is
to wake up the corresponding rcuo callback-offload kthread, which
does the job of starting up a grace period and invoking the callbacks
afterwards.
One solution (championed on a related problem by Lai Jiangshan) is to
simply defer the wakeup to some point where scheduler locks are no longer
held. Since we don't want to unnecessarily incur the cost of such
deferral, the task before us is threefold:
1. Determine when it is likely that a relevant scheduler lock is held.
2. Defer the wakeup in such cases.
3. Ensure that all deferred wakeups eventually happen, preferably
sooner rather than later.
We use irqs_disabled_flags() as a proxy for relevant scheduler locks
being held. This works because the relevant locks are always acquired
with interrupts disabled. We may defer more often than needed, but that
is at least safe.
The wakeup deferral is tracked via a new field in the per-CPU and
per-RCU-flavor rcu_data structure, namely ->nocb_defer_wakeup.
This flag is checked by the RCU core processing. The __rcu_pending()
function now checks this flag, which causes rcu_check_callbacks()
to initiate RCU core processing at each scheduling-clock interrupt
where this flag is set. Of course this is not sufficient because
scheduling-clock interrupts are often turned off (the things we used to
be able to count on!). So the flags are also checked on entry to any
state that RCU considers to be idle, which includes both NO_HZ_IDLE idle
state and NO_HZ_FULL user-mode-execution state.
This approach should allow call_rcu() to be invoked regardless of what
locks you might be holding, the key word being "should".
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
It is all too easy to forget that wait_event() does not necessarily
imply a full memory barrier. The case where it does not is where the
condition transitions to true just as wait_event() starts execution.
This is actually a feature: The standard use of wait_event() involves
locking, in which case the locks provide the needed ordering (you hold a
lock across the wake_up() and acquire that same lock after wait_event()
returns).
Given that I did forget that wait_event() does not necessarily imply a
full memory barrier in one case, this commit fixes that case. This commit
also adds comments calling out the placement of existing memory barriers
relied on by wait_event() calls.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
When an RCU CPU stall warning occurs, the CPU invokes resched_cpu() on
itself. This can help move the grace period forward in some situations,
but it would be even better to do this -before- the RCU CPU stall warning.
This commit therefore causes resched_cpu() to be called every five jiffies
once the system is halfway to an RCU CPU stall warning.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
A posix CPU timer can be rearmed while it is firing or after it is
notified with a signal. This can happen for example with timers that
were set with a non zero interval in timer_settime().
This rearming can happen in two places:
1) On timer firing time, which happens on the target's tick. If the timer
can't trigger a signal because it is ignored, it reschedules itself
to honour the timer interval.
2) On signal handling from the timer's notification target. This one
can be a different task than the timer's target itself. Once the
signal is notified, the notification target rearms the timer, again
to honour the timer interval.
When a timer is rearmed, we need to notify the full dynticks CPUs
such that they restart their tick in case they are running tasks that
may have a share in elapsing this timer.
Now the 1st case above handles full dynticks CPUs with a call to
posix_cpu_timer_kick_nohz() from the posix cpu timer firing code. But
the second case ignores the fact that some CPUs may run non-idle tasks
with their tick off. As a result, when a timer is resheduled after its signal
notification, the full dynticks CPUs may completely ignore it and not
tick on the timer as expected
This patch fixes this bug by handling both cases in one. All we need
is to move the kick to the rearming common code in posix_cpu_timer_schedule().
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Olivier Langlois <olivier@olivierlanglois.net>
After a posix cpu timer is set, a workqueue is scheduled in order to
kick the full dynticks CPUs and let them restart their tick if
necessary in case the task they are running is concerned by the
new timer.
This kick is implemented by way of IPIs, which require interrupts
to be enabled, hence the need for a workqueue to raise them because
the posix cpu timer set path has interrupts disabled.
Now if there is no full dynticks CPU on the system, the workqueue is
still scheduled but it simply won't send any IPI and return immediately.
So lets spare that worqueue when it is not needed.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Use a function with a meaningful name to check the global context
tracking state. static_key_false() is a bit confusing for reviewers.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
A few functions use remote per CPU access APIs when they
deal with local values.
Just do the right conversion to improve performance, code
readability and debug checks.
While at it, lets extend some of these function names with *_this_cpu()
suffix in order to display their purpose more clearly.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Pull irq fixes from Thomas Gleixner:
- Correction of fuzzy and fragile IRQ_RETVAL macro
- IRQ related resume fix affecting only XEN
- ARM/GIC fix for chained GIC controllers
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Gic: fix boot for chained gics
irq: Enable all irqs unconditionally in irq_resume
genirq: Correct fuzzy and fragile IRQ_RETVAL() definition
Pull scheduler fixes from Ingo Molnar:
"Various smaller fixlets, all over the place"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/doc: Fix generation of device-drivers
sched: Expose preempt_schedule_irq()
sched: Fix a trivial typo in comments
sched: Remove unused variable in 'struct sched_domain'
sched: Avoid NULL dereference on sd_busy
sched: Check sched_domain before computing group power
MAINTAINERS: Update file patterns in the lockdep and scheduler entries
Pull perf fixes from Ingo Molnar:
"Misc kernel and tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools lib traceevent: Fix conversion of pointer to integer of different size
perf/trace: Properly use u64 to hold event_id
perf: Remove fragile swevent hlist optimization
ftrace, perf: Avoid infinite event generation loop
tools lib traceevent: Fix use of multiple options in processing field
perf header: Fix possible memory leaks in process_group_desc()
perf header: Fix bogus group name
perf tools: Tag thread comm as overriden
To support the ability to implement PM hibernation code as modules
the hibernation_set_ops function requires to be exported.
Similar solution already available for suspend_set_ops
(please refer to commit a5e4fd8783).
Signed-off-by: Leonardo Potenza <leonardo.potenza@intel.com>
Signed-off-by: Edwin Verplanke <edwin.verplanke@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull workqueue fixes from Tejun Heo:
"This contains one important fix. The NUMA support added a while back
broke ordering guarantees on ordered workqueues. It was enforced by
having single frontend interface with @max_active == 1 but the NUMA
support puts multiple interfaces on unbound workqueues on NUMA
machines thus breaking the ordered guarantee. This is fixed by
disabling NUMA support on ordered workqueues.
The above and a couple other patches were sitting in for-3.12-fixes
but I forgot to push that out, so they ended up waiting a bit too
long. My aplogies.
Other fixes are minor"
* 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix pool ID allocation leakage and remove BUILD_BUG_ON() in init_workqueues
workqueue: fix comment typo for __queue_work()
workqueue: fix ordered workqueues in NUMA setups
workqueue: swap set_cpus_allowed_ptr() and PF_NO_SETAFFINITY
Pull cgroup fixes from Tejun Heo:
"Fixes for three issues.
- cgroup destruction path could swamp system_wq possibly leading to
deadlock. This actually seems to happen in the wild with memcg
because memcg destruction path adds nested dependency on system_wq.
Resolved by isolating cgroup destruction work items on its
dedicated workqueue.
- Possible locking context deadlock through seqcount reported by
lockdep
- Memory leak under certain conditions"
* 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: fix cgroup_subsys_state leak for seq_files
cpuset: Fix memory allocator deadlock
cgroup: use a dedicated workqueue for cgroup destruction
For some reason, tasks and cgroup.procs guarantee that the result is
sorted. This is the only reason this whole pidlist logic is necessary
instead of just iterating through sorted member tasks. We can't do
anything about the existing interface but at least ensure that such
expectation doesn't exist for the new interface so that pidlist logic
may be removed in the distant future.
This patch scrambles the sort order if sane_behavior so that the
output is usually not sorted in the new interface.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
After the recent changes, pidlist ref is held only between
cgroup_pidlist_start() and cgroup_pidlist_stop() during which
cgroup->pidlist_mutex is also held. IOW, the reference count is
redundant now. While in use, it's always one and pidlist_mutex is
held - holding the mutex has exactly the same protection.
This patch collapses destroy_dwork queueing into cgroup_pidlist_stop()
so that pidlist_mutex is not released inbetween and drops
pidlist->use_count.
This patch shouldn't introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Currently, pidlists are reference counted from file open and release
methods. This means that holding onto an open file may waste memory
and reads may return data which is very stale. Both aren't critical
because pidlists are keyed and shared per namespace and, well, the
user isn't supposed to have large delay between open and reads.
cgroup is planned to be converted to use kernfs and it'd be best if we
can stick to just the seq_file operations - start, next, stop and
show. This can be achieved by loading pidlist on demand from start
and release with time delay from stop, so that consecutive reads don't
end up reloading the pidlist on each iteration. This would remove the
need for hooking into open and release while also avoiding issues with
holding onto pidlist for too long.
The previous patches implemented delayed release and restructured
pidlist handling so that pidlists can be loaded and released from
seq_file start / stop. This patch actually moves pidlist load to
start and release to stop.
This means that pidlist is pinned only between start and stop and may
go away between two consecutive read calls if the two calls are apart
by more than CGROUP_PIDLIST_DESTROY_DELAY. cgroup_pidlist_start()
thus can't re-use the stored cgroup_pid_list_open_file->pidlist
directly. During start, it's only used as a hint indicating whether
this is the first start after open or not and pidlist is always looked
up or created.
pidlist_mutex locking and reference counting are moved out of
pidlist_array_load() so that pidlist_array_load() can perform lookup
and creation atomically. While this enlarges the area covered by
pidlist_mutex, given how the lock is used, it's highly unlikely to be
noticeable.
v2: Refreshed on top of the updated "cgroup: introduce struct
cgroup_pidlist_open_file".
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup_pidlist locking is needlessly complicated. It has outer
cgroup->pidlist_mutex to protect the list of pidlists associated with
a cgroup and then each pidlist has rwsem to synchronize updates and
reads. Given that the only read access is from seq_file operations
which are always invoked back-to-back, the rwsem is a giant overkill.
All it does is adding unnecessary complexity.
This patch removes cgroup_pidlist->rwsem and protects all accesses to
pidlists belonging to a cgroup with cgroup->pidlist_mutex.
pidlist->rwsem locking is removed if it's nested inside
cgroup->pidlist_mutex; otherwise, it's replaced with
cgroup->pidlist_mutex locking.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Rename cgroup_pidlist_find() to cgroup_pidlist_find_create() and
separate out finding proper to cgroup_pidlist_find(). Also, move
locking to the caller.
This patch is preparation for pidlist restructure and doesn't
introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
For pidlist files, seq_file->private pointed to the loaded
cgroup_pidlist; however, pidlist loading is planned to be moved to
cgroup_pidlist_start() for kernfs conversion and seq_file->private
needs to carry more information from open to allow that.
This patch introduces struct cgroup_pidlist_open_file which contains
type, cgrp and pidlist and updates pidlist seq_file->private to point
to it using seq_open_private() and seq_release_private(). Note that
this eventually will be replaced by kernfs_open_file.
While this patch makes more information available to seq_file
operations, they don't use it yet and this patch doesn't introduce any
behavior changes except for allocation of the extra private struct.
v2: use __seq_open_private() instead of seq_open_private() for brevity
as suggested by Li.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Currently, pidlists are reference counted from file open and release
methods. This means that holding onto an open file may waste memory
and reads may return data which is very stale. Both aren't critical
because pidlists are keyed and shared per namespace and, well, the
user isn't supposed to have large delay between open and reads.
cgroup is planned to be converted to use kernfs and it'd be best if we
can stick to just the seq_file operations - start, next, stop and
show. This can be achieved by loading pidlist on demand from start
and release with time delay from stop, so that consecutive reads don't
end up reloading the pidlist on each iteration. This would remove the
need for hooking into open and release while also avoiding issues with
holding onto pidlist for too long.
This patch implements delayed release of pidlist. As pidlists could
be lingering on cgroup removal waiting for the timer to expire, cgroup
free path needs to queue the destruction work item immediately and
flush. As those work items are self-destroying, each work item can't
be flushed directly. A new workqueue - cgroup_pidlist_destroy_wq - is
added to serve as flush domain.
Note that this patch just adds delayed release on top of the current
implementation and doesn't change where pidlist is loaded and
released. Following patches will make those changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Now that pidlist files don't use cftype->release(), it doesn't have
any user left. Remove it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Currently, cgroup_pidlist_open() skips seq_open() and pidlist loading
if the file is opened write-only, which is a sensible optimization as
pidlist loading can be costly and there often are occasions where
tasks or cgroup.procs is opened write-only. However, pidlist init and
release are planned to be moved to cgroup_pidlist_start/stop()
respectively which would make this optimization unnecessary.
This patch removes the optimization and always fully initializes
pidlist files regardless of open mode. This will help moving pidlist
handling to start/stop by unifying rw paths and removes the need for
specifying cftype->release() in addition to .release in
cgroup_pidlist_operations as file->f_op is now always overridden. As
pidlist files were the only user of cftype->release(), the next patch
will remove the method.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
If CONFIG_NO_HZ=n tick_nohz_get_sleep_length() returns NSEC_PER_SEC/HZ.
If CONFIG_NO_HZ=y and the nohz functionality is disabled via the
command line option "nohz=off" or not enabled due to missing hardware
support, then tick_nohz_get_sleep_length() returns 0. That happens
because ts->sleep_length is never set in that case.
Set it to NSEC_PER_SEC/HZ when the NOHZ mode is inactive.
Reported-by: Michal Hocko <mhocko@suse.cz>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The init_kernel_text() and core_kernel_text() functions should not
include the labels _einittext and _etext when checking if an address is
inside the .text or .init sections.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull to receive e605b36575 ("cgroup: fix cgroup_subsys_state leak
for seq_files") as for-3.14 is scheduled to have a lot of changes
which depend on it.
Signed-off-by: Tejun Heo <tj@kernel.org>
If a cgroup file implements either read_map() or read_seq_string(),
such file is served using seq_file by overriding file->f_op to
cgroup_seqfile_operations, which also overrides the release method to
single_release() from cgroup_file_release().
Because cgroup_file_open() didn't use to acquire any resources, this
used to be fine, but since f7d58818ba ("cgroup: pin
cgroup_subsys_state when opening a cgroupfs file"), cgroup_file_open()
pins the css (cgroup_subsys_state) which is put by
cgroup_file_release(). The patch forgot to update the release path
for seq_files and each open/release cycle leaks a css reference.
Fix it by updating cgroup_file_release() to also handle seq_files and
using it for seq_file release path too.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v3.12
Juri hit the below lockdep report:
[ 4.303391] ======================================================
[ 4.303392] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ]
[ 4.303394] 3.12.0-dl-peterz+ #144 Not tainted
[ 4.303395] ------------------------------------------------------
[ 4.303397] kworker/u4:3/689 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[ 4.303399] (&p->mems_allowed_seq){+.+...}, at: [<ffffffff8114e63c>] new_slab+0x6c/0x290
[ 4.303417]
[ 4.303417] and this task is already holding:
[ 4.303418] (&(&q->__queue_lock)->rlock){..-...}, at: [<ffffffff812d2dfb>] blk_execute_rq_nowait+0x5b/0x100
[ 4.303431] which would create a new lock dependency:
[ 4.303432] (&(&q->__queue_lock)->rlock){..-...} -> (&p->mems_allowed_seq){+.+...}
[ 4.303436]
[ 4.303898] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock:
[ 4.303918] -> (&p->mems_allowed_seq){+.+...} ops: 2762 {
[ 4.303922] HARDIRQ-ON-W at:
[ 4.303923] [<ffffffff8108ab9a>] __lock_acquire+0x65a/0x1ff0
[ 4.303926] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140
[ 4.303929] [<ffffffff81063dd6>] kthreadd+0x86/0x180
[ 4.303931] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0
[ 4.303933] SOFTIRQ-ON-W at:
[ 4.303933] [<ffffffff8108abcc>] __lock_acquire+0x68c/0x1ff0
[ 4.303935] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140
[ 4.303940] [<ffffffff81063dd6>] kthreadd+0x86/0x180
[ 4.303955] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0
[ 4.303959] INITIAL USE at:
[ 4.303960] [<ffffffff8108a884>] __lock_acquire+0x344/0x1ff0
[ 4.303963] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140
[ 4.303966] [<ffffffff81063dd6>] kthreadd+0x86/0x180
[ 4.303969] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0
[ 4.303972] }
Which reports that we take mems_allowed_seq with interrupts enabled. A
little digging found that this can only be from
cpuset_change_task_nodemask().
This is an actual deadlock because an interrupt doing an allocation will
hit get_mems_allowed()->...->__read_seqcount_begin(), which will spin
forever waiting for the write side to complete.
Cc: John Stultz <john.stultz@linaro.org>
Cc: Mel Gorman <mgorman@suse.de>
Reported-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Juri Lelli <juri.lelli@gmail.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Add rq->nr_running to sgs->sum_nr_running directly instead of
assigning it through an intermediate variable nr_running.
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1384508212-25032-1-git-send-email-kamalesh@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
schedule_debug() ignores in_atomic() if prev->exit_state != 0.
This is not what we want, ->exit_state is set by exit_notify()
but we should complain until the task does the last schedule()
in TASK_DEAD.
See also 7407251a0e "PF_DEAD cleanup", I think this ancient
commit explains why schedule() had to rely on ->exit_state,
until that commit exit_notify() disabled preemption and set
PF_DEAD which was used to detect the exiting task.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20131113154538.GB15810@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A zombie task obviously can't fork(), remove the unnecessary
initialization of child->exit_state. It is zero anyway after
dup_task_struct().
Note: copy_process() is huge and it has a lot of chaotic
initializations, probably it makes sense to move them into the
new helper called by dup_task_struct().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131113143612.GA10540@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Lockdep is an awesome piece of code which detects locking issues
which are relevant both to userspace and kernelspace. We can
easily make lockdep work in userspace since there is really no
kernel spacific magic going on in the code.
All we need is to wrap two functions which are used by lockdep
and are very kernel specific.
Doing that will allow tools located in tools/ to easily utilize
lockdep's code for their own use.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: penberg@kernel.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/1352753446-24109-1-git-send-email-sasha.levin@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds a new field to the struct perf_event.
It is intended to be used to chain events which are
active (enabled). It helps in the hardware layer
for PMUs which do not have actual counter restrictions, i.e.,
free running read-only counters. Active events are chained
as opposed to being tracked via the counter they use.
To save space we use a union with hlist_entry as both
are mutually exclusive (suggested by Jiri Olsa).
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: acme@redhat.com
Cc: jolsa@redhat.com
Cc: zheng.z.yan@intel.com
Cc: bp@alien8.de
Cc: maria.n.dimakopoulou@gmail.com
Link: http://lkml.kernel.org/r/1384275531-10892-2-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instead of saving the hardirq state on a per CPU variable, which require
an explicit call before the softirq handling and some complication,
just save and restore the hardirq tracing state through functions
return values and parameters.
It simplifies a bit the black magic that works around the fact that
softirqs can be called from hardirqs while hardirqs can nest on softirqs
but those two cases have very different semantics and only the latter
case assume both states.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1384906054-30676-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tony reported that aa0d532605 ("ia64: Use preempt_schedule_irq")
broke PREEMPT=n builds on ia64.
Ok, wrapped my brain around it. I tripped over the magic asm foo which
has a single need_resched check and schedule point for both sys call
return and interrupt return.
So you need the schedule_preempt_irq() for kernel preemption from
interrupt return while on a normal syscall preemption a schedule would
be sufficient. But using schedule_preempt_irq() is not harmful here in
any way. It just sets the preempt_active bit also in cases where it
would not be required.
Even on preempt=n kernels adding the preempt_active bit is completely
harmless. So instead of having an extra function, moving the existing
one out of the ifdef PREEMPT looks like the sanest thing to do.
It would also allow getting rid of various other sti/schedule/cli asm
magic in other archs.
Reported-and-Tested-by: Tony Luck <tony.luck@gmail.com>
Fixes: aa0d532605 ("ia64: Use preempt_schedule_irq")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[slightly edited Changelog]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311211230030.30673@ionos.tec.linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Serge Hallyn <serge.hallyn@ubuntu.com> writes:
> Hi Oleg,
>
> commit 40a0d32d1e :
> "fork: unify and tighten up CLONE_NEWUSER/CLONE_NEWPID checks"
> breaks lxc-attach in 3.12. That code forks a child which does
> setns() and then does a clone(CLONE_PARENT). That way the
> grandchild can be in the right namespaces (which the child was
> not) and be a child of the original task, which is the monitor.
>
> lxc-attach in 3.11 was working fine with no side effects that I
> could see. Is there a real danger in allowing CLONE_PARENT
> when current->nsproxy->pidns_for_children is not our pidns,
> or was this done out of an "over-abundance of caution"? Can we
> safely revert that new extra check?
The two fundamental things I know we can not allow are:
- A shared signal queue aka CLONE_THREAD. Because we compute the pid
and uid of the signal when we place it in the queue.
- Changing the pid and by extention pid_namespace of an existing
process.
From a parents perspective there is nothing special about the pid
namespace, to deny CLONE_PARENT, because the parent simply won't know or
care.
From the childs perspective all that is special really are shared signal
queues.
User mode threading with CLONE_PARENT|CLONE_VM|CLONE_SIGHAND and tasks
in different pid namespaces is almost certainly going to break because
it is complicated. But shared signal handlers can look at per thread
information to know which pid namespace a process is in, so I don't know
of any reason not to support CLONE_PARENT|CLONE_VM|CLONE_SIGHAND threads
at the kernel level. It would be absolutely stupid to implement but
that is a different thing.
So hmm.
Because it can do no harm, and because it is a regression let's remove
the CLONE_PARENT check and send it stable.
Cc: stable@vger.kernel.org
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
1) is a bug fix that happens when root does the following:
echo function_graph > current_tracer
modprobe foo
echo nop > current_tracer
This causes the ftrace internal accounting to get screwed up and
crashes ftrace, preventing the user from using the function tracer
after that.
2) if a TRACE_EVENT has a string field, and NULL is given for it.
The internal trace event code does a strlen() and strcpy() on the
source of field. If it is NULL it causes the system to oops.
This bug has been there since 2.6.31, but no TRACE_EVENT ever passed
in a NULL to the string field, until now.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSlUw+AAoJEKQekfcNnQGugTYIAJQ7Zfhor2Jrw7XzkcBDpQv9
kqL/NvjLfyA49BLwba0VJCqJA56dEfW7kaSa7Wx0qAHdHKATLDA8G4c9FdHRAmZf
WJ4jDbrcJqc7DA2vEn4aUuczwvTMx0H1KJHPMAu9taEno3YocIzCMxkuNYelwAz2
XUkUGtR7olF85pyVccfZLKnKPtslSwxWoG6WgEqiAap6fIorPlcSXBVYFqLKVTRJ
P2e847eqxMF5ACLmv3dWiEvTPtWY91abN1zpeJYQNjBtQJmzVlvRcXYE6TwPUIFg
RtB9n3SrT+0lEWvcxDbQi+4hKHf+JQLkGaYwWCMJihbdF4sh36olzpUOimKVqsk=
=+9+v
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"This includes two fixes.
1) is a bug fix that happens when root does the following:
echo function_graph > current_tracer
modprobe foo
echo nop > current_tracer
This causes the ftrace internal accounting to get screwed up and
crashes ftrace, preventing the user from using the function tracer
after that.
2) if a TRACE_EVENT has a string field, and NULL is given for it.
The internal trace event code does a strlen() and strcpy() on the
source of field. If it is NULL it causes the system to oops.
This bug has been there since 2.6.31, but no TRACE_EVENT ever passed
in a NULL to the string field, until now"
* tag 'trace-fixes-v3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix function graph with loading of modules
tracing: Allow events to have NULL strings
Commit 8c4f3c3fa9 "ftrace: Check module functions being traced on reload"
fixed module loading and unloading with respect to function tracing, but
it missed the function graph tracer. If you perform the following
# cd /sys/kernel/debug/tracing
# echo function_graph > current_tracer
# modprobe nfsd
# echo nop > current_tracer
You'll get the following oops message:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 2910 at /linux.git/kernel/trace/ftrace.c:1640 __ftrace_hash_rec_update.part.35+0x168/0x1b9()
Modules linked in: nfsd exportfs nfs_acl lockd ipt_MASQUERADE sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables uinput snd_hda_codec_idt
CPU: 2 PID: 2910 Comm: bash Not tainted 3.13.0-rc1-test #7
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
0000000000000668 ffff8800787efcf8 ffffffff814fe193 ffff88007d500000
0000000000000000 ffff8800787efd38 ffffffff8103b80a 0000000000000668
ffffffff810b2b9a ffffffff81a48370 0000000000000001 ffff880037aea000
Call Trace:
[<ffffffff814fe193>] dump_stack+0x4f/0x7c
[<ffffffff8103b80a>] warn_slowpath_common+0x81/0x9b
[<ffffffff810b2b9a>] ? __ftrace_hash_rec_update.part.35+0x168/0x1b9
[<ffffffff8103b83e>] warn_slowpath_null+0x1a/0x1c
[<ffffffff810b2b9a>] __ftrace_hash_rec_update.part.35+0x168/0x1b9
[<ffffffff81502f89>] ? __mutex_lock_slowpath+0x364/0x364
[<ffffffff810b2cc2>] ftrace_shutdown+0xd7/0x12b
[<ffffffff810b47f0>] unregister_ftrace_graph+0x49/0x78
[<ffffffff810c4b30>] graph_trace_reset+0xe/0x10
[<ffffffff810bf393>] tracing_set_tracer+0xa7/0x26a
[<ffffffff810bf5e1>] tracing_set_trace_write+0x8b/0xbd
[<ffffffff810c501c>] ? ftrace_return_to_handler+0xb2/0xde
[<ffffffff811240a8>] ? __sb_end_write+0x5e/0x5e
[<ffffffff81122aed>] vfs_write+0xab/0xf6
[<ffffffff8150a185>] ftrace_graph_caller+0x85/0x85
[<ffffffff81122dbd>] SyS_write+0x59/0x82
[<ffffffff8150a185>] ftrace_graph_caller+0x85/0x85
[<ffffffff8150a2d2>] system_call_fastpath+0x16/0x1b
---[ end trace 940358030751eafb ]---
The above mentioned commit didn't go far enough. Well, it covered the
function tracer by adding checks in __register_ftrace_function(). The
problem is that the function graph tracer circumvents that (for a slight
efficiency gain when function graph trace is running with a function
tracer. The gain was not worth this).
The problem came with ftrace_startup() which should always be called after
__register_ftrace_function(), if you want this bug to be completely fixed.
Anyway, this solution moves __register_ftrace_function() inside of
ftrace_startup() and removes the need to call them both.
Reported-by: Dave Wysochanski <dwysocha@redhat.com>
Fixes: ed926f9b35 ("ftrace: Use counters to enable functions to trace")
Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The panic_timeout value can be set via the command line option
'panic=x', or via /proc/sys/kernel/panic, however that is not
sufficient when the panic occurs before we are able to set up
these values. Thus, add a CONFIG_PANIC_TIMEOUT so that we can
set the desired value from the .config.
The default panic_timeout value continues to be 0 - wait
forever. Also adds set_arch_panic_timeout(new_timeout,
arch_default_timeout), which is intended to be used by arches in
arch_setup(). The idea being that the new_timeout is only set if
the user hasn't changed from the arch_default_timeout.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: benh@kernel.crashing.org
Cc: paulus@samba.org
Cc: ralf@linux-mips.org
Cc: mpe@ellerman.id.au
Cc: felipe.contreras@gmail.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1a1674daec27c534df409697025ac568ebcee91e.1385418410.git.jbaron@akamai.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This reverts commit c2fda50966.
c2fda50966 removed lockdep annotation from work_on_cpu() to work around
the PCI path that calls work_on_cpu() from within a work_on_cpu() work item
(PF driver .probe() method -> pci_enable_sriov() -> add VFs -> VF driver
.probe method).
961da7fb6b22 ("PCI: Avoid unnecessary CPU switch when calling driver
.probe() method) avoids that recursive work_on_cpu() use in a different
way, so this revert restores the work_on_cpu() lockdep annotation.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
When the system enters suspend, it disables all interrupts in
suspend_device_irqs(), including the interrupts marked EARLY_RESUME.
On the resume side things are different. The EARLY_RESUME interrupts
are reenabled in sys_core_ops->resume and the non EARLY_RESUME
interrupts are reenabled in the normal system resume path.
When suspend_noirq() failed or suspend is aborted for any other
reason, we might omit the resume side call to sys_core_ops->resume()
and therefor the interrupts marked EARLY_RESUME are not reenabled and
stay disabled forever.
To solve this, enable all irqs unconditionally in irq_resume()
regardless whether interrupts marked EARLY_RESUMEhave been already
enabled or not.
This might try to reenable already enabled interrupts in the non
failure case, but the only affected platform is XEN and it has been
confirmed that it does not cause any side effects.
[ tglx: Massaged changelog. ]
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by-and-tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Cc: <ian.campbell@citrix.com>
Cc: <rjw@rjwysocki.net>
Cc: <len.brown@intel.com>
Cc: <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1385388587-16442-1-git-send-email-ldewangan@nvidia.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull crypto update from Herbert Xu:
- Made x86 ablk_helper generic for ARM
- Phase out chainiv in favour of eseqiv (affects IPsec)
- Fixed aes-cbc IV corruption on s390
- Added constant-time crypto_memneq which replaces memcmp
- Fixed aes-ctr in omap-aes
- Added OMAP3 ROM RNG support
- Add PRNG support for MSM SoC's
- Add and use Job Ring API in caam
- Misc fixes
[ NOTE! This pull request was sent within the merge window, but Herbert
has some questionable email sending setup that makes him public enemy
#1 as far as gmail is concerned. So most of his emails seem to be
trapped by gmail as spam, resulting in me not seeing them. - Linus ]
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (49 commits)
crypto: s390 - Fix aes-cbc IV corruption
crypto: omap-aes - Fix CTR mode counter length
crypto: omap-sham - Add missing modalias
padata: make the sequence counter an atomic_t
crypto: caam - Modify the interface layers to use JR API's
crypto: caam - Add API's to allocate/free Job Rings
crypto: caam - Add Platform driver for Job Ring
hwrng: msm - Add PRNG support for MSM SoC's
ARM: DT: msm: Add Qualcomm's PRNG driver binding document
crypto: skcipher - Use eseqiv even on UP machines
crypto: talitos - Simplify key parsing
crypto: picoxcell - Simplify and harden key parsing
crypto: ixp4xx - Simplify and harden key parsing
crypto: authencesn - Simplify key parsing
crypto: authenc - Export key parsing helper function
crypto: mv_cesa: remove deprecated IRQF_DISABLED
hwrng: OMAP3 ROM Random Number Generator support
crypto: sha256_ssse3 - also test for BMI2
crypto: mv_cesa - Remove redundant of_match_ptr
crypto: sahara - Remove redundant of_match_ptr
...
Merge v3.12 based patch series to move cgroup_event implementation to
memcg into for-3.14. The following two commits cause a conflict in
kernel/cgroup.c
2ff2a7d03b ("cgroup: kill css_id")
79bd9814e5 ("cgroup, memcg: move cgroup_event implementation to memcg")
Each patch removes a struct definition from kernel/cgroup.c. As the
two are adjacent, they cause a context conflict. Easily resolved by
removing both structs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Now that cgroup_event is made memcg specific, the temporarily exported
functions are no longer necessary. Unexport cgroup_css() and remove
__file_cft() which doesn't have any user left.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
cgroup_event is being moved from cgroup core to memcg and the
implementation is already moved by the previous patch. This patch
moves the data fields and callbacks.
* cgroup->event_list[_lock] are moved to mem_cgroup.
* cftype->[un]register_event() are moved to cgroup_event. This makes
it impossible for individual cftype definitions to specify their
event callbacks. This is worked around by simply hard-coding
filename to event callback mapping in cgroup_write_event_control().
This is awkward and inflexible, which is actually desirable given
that we don't want to grow more usages of this feature.
* eventfd_ctx declaration is removed from cgroup.h, which makes
vmpressure.h miss eventfd_ctx declaration. Include eventfd.h from
vmpressure.h.
v2: Use file name from dentry instead of cftype. This will allow
removing all cftype handling in the function.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
cgroup_event is way over-designed and tries to build a generic
flexible event mechanism into cgroup - fully customizable event
specification for each user of the interface. This is utterly
unnecessary and overboard especially in the light of the planned
unified hierarchy as there's gonna be single agent. Simply generating
events at fixed points, or if that's too restrictive, configureable
cadence or single set of configureable points should be enough.
Thankfully, memcg is the only user and gets to keep it. Replacing it
with something simpler on sane_behavior is strongly recommended.
This patch moves cgroup_event and "cgroup.event_control"
implementation to mm/memcontrol.c. Clearing of events on cgroup
destruction is moved from cgroup_destroy_locked() to
mem_cgroup_css_offline(), which shouldn't make any noticeable
difference.
cgroup_css() and __file_cft() are exported to enable the move;
however, this will soon be reverted once the event code is updated to
be memcg specific.
Note that "cgroup.event_control" will now exist only on the hierarchy
with memcg attached to it. While this change is visible to userland,
it is unlikely to be noticeable as the file has never been meaningful
outside memcg.
Aside from the above change, this is pure code relocation.
v2: Per Li Zefan's comments, init/Kconfig updated accordingly and
poll.h inclusion moved from cgroup.c to memcontrol.c.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
When one work starts execution, the high bits of work's data contain
pool ID. It can represent a maximum of WORK_OFFQ_POOL_NONE. Pool ID
is assigned WORK_OFFQ_POOL_NONE when the work being initialized
indicating that no pool is associated and get_work_pool() uses it to
check the associated pool. So if worker_pool_assign_id() assigns a
ID greater than or equal WORK_OFFQ_POOL_NONE to a pool, it triggers
leakage, and it may break the non-reentrance guarantee.
This patch fix this issue by modifying the worker_pool_assign_id()
function calling idr_alloc() by setting @end param WORK_OFFQ_POOL_NONE.
Furthermore, in the current implementation, the BUILD_BUG_ON() in
init_workqueues makes no sense. The number of worker pools needed
cannot be determined at compile time, because the number of backing
pools for UNBOUND workqueues is dynamic based on the assigned custom
attributes. So remove it.
tj: Minor comment and indentation updates.
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
An ordered workqueue implements execution ordering by using single
pool_workqueue with max_active == 1. On a given pool_workqueue, work
items are processed in FIFO order and limiting max_active to 1
enforces the queued work items to be processed one by one.
Unfortunately, 4c16bd327c ("workqueue: implement NUMA affinity for
unbound workqueues") accidentally broke this guarantee by applying
NUMA affinity to ordered workqueues too. On NUMA setups, an ordered
workqueue would end up with separate pool_workqueues for different
nodes. Each pool_workqueue still limits max_active to 1 but multiple
work items may be executed concurrently and out of order depending on
which node they are queued to.
Fix it by using dedicated ordered_wq_attrs[] when creating ordered
workqueues. The new attrs match the unbound ones except that no_numa
is always set thus forcing all NUMA nodes to share the default
pool_workqueue.
While at it, add sanity check in workqueue creation path which
verifies that an ordered workqueues has only the default
pool_workqueue.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Libin <huawei.libin@huawei.com>
Cc: stable@vger.kernel.org
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Move the setting of PF_NO_SETAFFINITY up before set_cpus_allowed()
in create_worker(). Otherwise userland can change ->cpus_allowed
in between.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since be44562613 ("cgroup: remove synchronize_rcu() from
cgroup_diput()"), cgroup destruction path makes use of workqueue. css
freeing is performed from a work item from that point on and a later
commit, ea15f8ccdb ("cgroup: split cgroup destruction into two
steps"), moves css offlining to workqueue too.
As cgroup destruction isn't depended upon for memory reclaim, the
destruction work items were put on the system_wq; unfortunately, some
controller may block in the destruction path for considerable duration
while holding cgroup_mutex. As large part of destruction path is
synchronized through cgroup_mutex, when combined with high rate of
cgroup removals, this has potential to fill up system_wq's max_active
of 256.
Also, it turns out that memcg's css destruction path ends up queueing
and waiting for work items on system_wq through work_on_cpu(). If
such operation happens while system_wq is fully occupied by cgroup
destruction work items, work_on_cpu() can't make forward progress
because system_wq is full and other destruction work items on
system_wq can't make forward progress because the work item waiting
for work_on_cpu() is holding cgroup_mutex, leading to deadlock.
This can be fixed by queueing destruction work items on a separate
workqueue. This patch creates a dedicated workqueue -
cgroup_destroy_wq - for this purpose. As these work items shouldn't
have inter-dependencies and mostly serialized by cgroup_mutex anyway,
giving high concurrency level doesn't buy anything and the workqueue's
@max_active is set to 1 so that destruction work items are executed
one by one on each CPU.
Hugh Dickins: Because cgroup_init() is run before init_workqueues(),
cgroup_destroy_wq can't be allocated from cgroup_init(). Do it from a
separate core_initcall(). In the future, we probably want to reorder
so that workqueue init happens before cgroup_init().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Link: http://lkml.kernel.org/r/20131111220626.GA7509@sbohrermbp13-local.rgmadvisors.com
Link: http://lkml.kernel.org/g/alpine.LNX.2.00.1310301606080.2333@eggly.anvils
Cc: stable@vger.kernel.org # v3.9+
Since commit 1e75fa8be9 (time: Condense timekeeper.xtime
into xtime_sec - merged in v3.6), there has been an problem
with the error accounting in the timekeeping code, such that
when truncating to nanoseconds, we round up to the next nsec,
but the balancing adjustment to the ntp_error value was dropped.
This causes 1ns per tick drift forward of the clock.
In 3.7, this logic was isolated to only GENERIC_TIME_VSYSCALL_OLD
architectures (s390, ia64, powerpc).
The fix is simply to balance the accounting and to subtract the
added nanosecond from ntp_error. This allows the internal long-term
clock steering to keep the clock accurate.
While this fix removes the regression added in 1e75fa8be9, the
ideal solution is to move away from GENERIC_TIME_VSYSCALL_OLD
and use the new VSYSCALL method, which avoids entirely the
nanosecond granular rounding, and the resulting short-term clock
adjustment oscillation needed to keep long term accurate time.
[ jstultz: Many thanks to Martin for his efforts identifying this
subtle bug, and providing the fix. ]
Originally-from: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Paul Turner <pjt@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable <stable@vger.kernel.org> #v3.6+
Link: http://lkml.kernel.org/r/1385149491-20307-1-git-send-email-john.stultz@linaro.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull security subsystem updates from James Morris:
"In this patchset, we finally get an SELinux update, with Paul Moore
taking over as maintainer of that code.
Also a significant update for the Keys subsystem, as well as
maintenance updates to Smack, IMA, TPM, and Apparmor"
and since I wanted to know more about the updates to key handling,
here's the explanation from David Howells on that:
"Okay. There are a number of separate bits. I'll go over the big bits
and the odd important other bit, most of the smaller bits are just
fixes and cleanups. If you want the small bits accounting for, I can
do that too.
(1) Keyring capacity expansion.
KEYS: Consolidate the concept of an 'index key' for key access
KEYS: Introduce a search context structure
KEYS: Search for auth-key by name rather than target key ID
Add a generic associative array implementation.
KEYS: Expand the capacity of a keyring
Several of the patches are providing an expansion of the capacity of a
keyring. Currently, the maximum size of a keyring payload is one page.
Subtract a small header and then divide up into pointers, that only gives
you ~500 pointers on an x86_64 box. However, since the NFS idmapper uses
a keyring to store ID mapping data, that has proven to be insufficient to
the cause.
Whatever data structure I use to handle the keyring payload, it can only
store pointers to keys, not the keys themselves because several keyrings
may point to a single key. This precludes inserting, say, and rb_node
struct into the key struct for this purpose.
I could make an rbtree of records such that each record has an rb_node
and a key pointer, but that would use four words of space per key stored
in the keyring. It would, however, be able to use much existing code.
I selected instead a non-rebalancing radix-tree type approach as that
could have a better space-used/key-pointer ratio. I could have used the
radix tree implementation that we already have and insert keys into it by
their serial numbers, but that means any sort of search must iterate over
the whole radix tree. Further, its nodes are a bit on the capacious side
for what I want - especially given that key serial numbers are randomly
allocated, thus leaving a lot of empty space in the tree.
So what I have is an associative array that internally is a radix-tree
with 16 pointers per node where the index key is constructed from the key
type pointer and the key description. This means that an exact lookup by
type+description is very fast as this tells us how to navigate directly to
the target key.
I made the data structure general in lib/assoc_array.c as far as it is
concerned, its index key is just a sequence of bits that leads to a
pointer. It's possible that someone else will be able to make use of it
also. FS-Cache might, for example.
(2) Mark keys as 'trusted' and keyrings as 'trusted only'.
KEYS: verify a certificate is signed by a 'trusted' key
KEYS: Make the system 'trusted' keyring viewable by userspace
KEYS: Add a 'trusted' flag and a 'trusted only' flag
KEYS: Separate the kernel signature checking keyring from module signing
These patches allow keys carrying asymmetric public keys to be marked as
being 'trusted' and allow keyrings to be marked as only permitting the
addition or linkage of trusted keys.
Keys loaded from hardware during kernel boot or compiled into the kernel
during build are marked as being trusted automatically. New keys can be
loaded at runtime with add_key(). They are checked against the system
keyring contents and if their signatures can be validated with keys that
are already marked trusted, then they are marked trusted also and can
thus be added into the master keyring.
Patches from Mimi Zohar make this usable with the IMA keyrings also.
(3) Remove the date checks on the key used to validate a module signature.
X.509: Remove certificate date checks
It's not reasonable to reject a signature just because the key that it was
generated with is no longer valid datewise - especially if the kernel
hasn't yet managed to set the system clock when the first module is
loaded - so just remove those checks.
(4) Make it simpler to deal with additional X.509 being loaded into the kernel.
KEYS: Load *.x509 files into kernel keyring
KEYS: Have make canonicalise the paths of the X.509 certs better to deduplicate
The builder of the kernel now just places files with the extension ".x509"
into the kernel source or build trees and they're concatenated by the
kernel build and stuffed into the appropriate section.
(5) Add support for userspace kerberos to use keyrings.
KEYS: Add per-user_namespace registers for persistent per-UID kerberos caches
KEYS: Implement a big key type that can save to tmpfs
Fedora went to, by default, storing kerberos tickets and tokens in tmpfs.
We looked at storing it in keyrings instead as that confers certain
advantages such as tickets being automatically deleted after a certain
amount of time and the ability for the kernel to get at these tokens more
easily.
To make this work, two things were needed:
(a) A way for the tickets to persist beyond the lifetime of all a user's
sessions so that cron-driven processes can still use them.
The problem is that a user's session keyrings are deleted when the
session that spawned them logs out and the user's user keyring is
deleted when the UID is deleted (typically when the last log out
happens), so neither of these places is suitable.
I've added a system keyring into which a 'persistent' keyring is
created for each UID on request. Each time a user requests their
persistent keyring, the expiry time on it is set anew. If the user
doesn't ask for it for, say, three days, the keyring is automatically
expired and garbage collected using the existing gc. All the kerberos
tokens it held are then also gc'd.
(b) A key type that can hold really big tickets (up to 1MB in size).
The problem is that Active Directory can return huge tickets with lots
of auxiliary data attached. We don't, however, want to eat up huge
tracts of unswappable kernel space for this, so if the ticket is
greater than a certain size, we create a swappable shmem file and dump
the contents in there and just live with the fact we then have an
inode and a dentry overhead. If the ticket is smaller than that, we
slap it in a kmalloc()'d buffer"
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (121 commits)
KEYS: Fix keyring content gc scanner
KEYS: Fix error handling in big_key instantiation
KEYS: Fix UID check in keyctl_get_persistent()
KEYS: The RSA public key algorithm needs to select MPILIB
ima: define '_ima' as a builtin 'trusted' keyring
ima: extend the measurement list to include the file signature
kernel/system_certificate.S: use real contents instead of macro GLOBAL()
KEYS: fix error return code in big_key_instantiate()
KEYS: Fix keyring quota misaccounting on key replacement and unlink
KEYS: Fix a race between negating a key and reading the error set
KEYS: Make BIG_KEYS boolean
apparmor: remove the "task" arg from may_change_ptraced_domain()
apparmor: remove parent task info from audit logging
apparmor: remove tsk field from the apparmor_audit_struct
apparmor: fix capability to not use the current task, during reporting
Smack: Ptrace access check mode
ima: provide hash algo info in the xattr
ima: enable support for larger default filedata hash algorithms
ima: define kernel parameter 'ima_template=' to change configured default
ima: add Kconfig default measurement list template
...
Pull audit updates from Eric Paris:
"Nothing amazing. Formatting, small bug fixes, couple of fixes where
we didn't get records due to some old VFS changes, and a change to how
we collect execve info..."
Fixed conflict in fs/exec.c as per Eric and linux-next.
* git://git.infradead.org/users/eparis/audit: (28 commits)
audit: fix type of sessionid in audit_set_loginuid()
audit: call audit_bprm() only once to add AUDIT_EXECVE information
audit: move audit_aux_data_execve contents into audit_context union
audit: remove unused envc member of audit_aux_data_execve
audit: Kill the unused struct audit_aux_data_capset
audit: do not reject all AUDIT_INODE filter types
audit: suppress stock memalloc failure warnings since already managed
audit: log the audit_names record type
audit: add child record before the create to handle case where create fails
audit: use given values in tty_audit enable api
audit: use nlmsg_len() to get message payload length
audit: use memset instead of trying to initialize field by field
audit: fix info leak in AUDIT_GET requests
audit: update AUDIT_INODE filter rule to comparator function
audit: audit feature to set loginuid immutable
audit: audit feature to only allow unsetting the loginuid
audit: allow unsetting the loginuid (with priv)
audit: remove CONFIG_AUDIT_LOGINUID_IMMUTABLE
audit: loginuid functions coding style
selinux: apply selinux checks on new audit message types
...
Pull vfs bits and pieces from Al Viro:
"Assorted bits that got missed in the first pull request + fixes for a
couple of coredump regressions"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fold try_to_ascend() into the sole remaining caller
dcache.c: get rid of pointless macros
take read_seqbegin_or_lock() and friends to seqlock.h
consolidate simple ->d_delete() instances
gfs2: endianness misannotations
dump_emit(): use __kernel_write(), not vfs_write()
dump_align(): fix the dumb braino
- ACPI-based device hotplug fixes for issues introduced recently and
a fix for an older error code path bug in the ACPI PCI host bridge
driver.
- Fix for recently broken OMAP cpufreq build from Viresh Kumar.
- Fix for a recent hibernation regression related to s2disk.
- Fix for a locking-related regression in the ACPI EC driver from
Puneet Kumar.
- System suspend error code path fix related to runtime PM and
runtime PM documentation update from Ulf Hansson.
- cpufreq's conservative governor fix from Xiaoguang Chen.
- New processor IDs for intel_idle and turbostat and removal of
an obsolete Kconfig option from Len Brown.
- New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and
ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg.
- Removal of several ACPI video DMI blacklist entries that are not
necessary any more from Aaron Lu.
- Rework of the ACPI companion representation in struct device and
code cleanup related to that change from Rafael J Wysocki,
Lan Tianyu and Jarkko Nikula.
- Fixes for assigning names to ACPI-enumerated I2C and SPI devices
from Jarkko Nikula.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=QMp+
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI and power management updates from Rafael Wysocki:
- ACPI-based device hotplug fixes for issues introduced recently and a
fix for an older error code path bug in the ACPI PCI host bridge
driver
- Fix for recently broken OMAP cpufreq build from Viresh Kumar
- Fix for a recent hibernation regression related to s2disk
- Fix for a locking-related regression in the ACPI EC driver from
Puneet Kumar
- System suspend error code path fix related to runtime PM and runtime
PM documentation update from Ulf Hansson
- cpufreq's conservative governor fix from Xiaoguang Chen
- New processor IDs for intel_idle and turbostat and removal of an
obsolete Kconfig option from Len Brown
- New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and
ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg
- Removal of several ACPI video DMI blacklist entries that are not
necessary any more from Aaron Lu
- Rework of the ACPI companion representation in struct device and code
cleanup related to that change from Rafael J Wysocki, Lan Tianyu and
Jarkko Nikula
- Fixes for assigning names to ACPI-enumerated I2C and SPI devices from
Jarkko Nikula
* tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
PCI / hotplug / ACPI: Drop unused acpiphp_debug declaration
ACPI / scan: Set flags.match_driver in acpi_bus_scan_fixed()
ACPI / PCI root: Clear driver_data before failing enumeration
ACPI / hotplug: Fix PCI host bridge hot removal
ACPI / hotplug: Fix acpi_bus_get_device() return value check
cpufreq: governor: Remove fossil comment in the cpufreq_governor_dbs()
ACPI / video: clean up DMI table for initial black screen problem
ACPI / EC: Ensure lock is acquired before accessing ec struct members
PM / Hibernate: Do not crash kernel in free_basic_memory_bitmaps()
ACPI / AC: Remove struct acpi_device pointer from struct acpi_ac
spi: Use stable dev_name for ACPI enumerated SPI slaves
i2c: Use stable dev_name for ACPI enumerated I2C slaves
ACPI: Provide acpi_dev_name accessor for struct acpi_device device name
ACPI / bind: Use (put|get)_device() on ACPI device objects too
ACPI: Eliminate the DEVICE_ACPI_HANDLE() macro
ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_node
cpufreq: OMAP: Fix compilation error 'r & ret undeclared'
PM / Runtime: Fix error path for prepare
PM / Runtime: Update documentation around probe|remove|suspend
cpufreq: conservative: set requested_freq to policy max when it is over policy max
...
1. Don't include asm/uprobes.h unconditionally, we only need
it if CONFIG_UPROBES.
2. Move the definition of "struct xol_area" into uprobes.c.
Perhaps we should simply kill struct uprobes_state, it buys
nothing.
3. Kill the dummy definition of uprobe_get_swbp_addr(), nobody
except handle_swbp() needs it.
4. Purely cosmetic, but move the decl of uprobe_get_swbp_addr()
up, close to other __weak helpers.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
arch_uprobe should be opaque as much as possible to the generic
code, but currently it assumes that insn/ixol must be u8[] of the
known size. Remove this unnecessary dependency, we can use "&" and
and sizeof() with the same effect.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
uprobe_task->vaddr is a bit strange. The generic code uses it only
to pass the additional argument to arch_uprobe_pre_xol(), and since
it is always equal to instruction_pointer() this looks even more
strange.
And both utask->vaddr and and utask->autask have the same scope,
they only have the meaning when the task executes the probed insn
out-of-line, so it is safe to reuse both in UTASK_RUNNING state.
This all means that logically ->vaddr belongs to arch_uprobe_task
and we should probably move it there, arch_uprobe_pre_xol() can
record instruction_pointer() itself.
OTOH, it is also used by uprobe_copy_process() and dup_xol_work()
for another purpose, this doesn't look clean and doesn't allow to
move this member into arch_uprobe_task.
This patch adds the union with 2 anonymous structs into uprobe_task.
The first struct is autask + vaddr, this way we "almost" move vaddr
into autask.
The second struct has 2 new members for uprobe_copy_process() paths:
->dup_xol_addr which can be used instead ->vaddr, and ->dup_xol_work
which can be used to avoid kmalloc() and simplify the code.
Note that this union will likely have another member(s), we need
something like "private_data_for_handlers" so that the tracing
handlers could use it to communicate with call_fetch() methods.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Pull networking fixes from David Miller:
"Mostly these are fixes for fallout due to merge window changes, as
well as cures for problems that have been with us for a much longer
period of time"
1) Johannes Berg noticed two major deficiencies in our genetlink
registration. Some genetlink protocols we passing in constant
counts for their ops array rather than something like
ARRAY_SIZE(ops) or similar. Also, some genetlink protocols were
using fixed IDs for their multicast groups.
We have to retain these fixed IDs to keep existing userland tools
working, but reserve them so that other multicast groups used by
other protocols can not possibly conflict.
In dealing with these two problems, we actually now use less state
management for genetlink operations and multicast groups.
2) When configuring interface hardware timestamping, fix several
drivers that simply do not validate that the hwtstamp_config value
is one the driver actually supports. From Ben Hutchings.
3) Invalid memory references in mwifiex driver, from Amitkumar Karwar.
4) In dev_forward_skb(), set the skb->protocol in the right order
relative to skb_scrub_packet(). From Alexei Starovoitov.
5) Bridge erroneously fails to use the proper wrapper functions to make
calls to netdev_ops->ndo_vlan_rx_{add,kill}_vid. Fix from Toshiaki
Makita.
6) When detaching a bridge port, make sure to flush all VLAN IDs to
prevent them from leaking, also from Toshiaki Makita.
7) Put in a compromise for TCP Small Queues so that deep queued devices
that delay TX reclaim non-trivially don't have such a performance
decrease. One particularly problematic area is 802.11 AMPDU in
wireless. From Eric Dumazet.
8) Fix crashes in tcp_fastopen_cache_get(), we can see NULL socket dsts
here. Fix from Eric Dumzaet, reported by Dave Jones.
9) Fix use after free in ipv6 SIT driver, from Willem de Bruijn.
10) When computing mergeable buffer sizes, virtio-net fails to take the
virtio-net header into account. From Michael Dalton.
11) Fix seqlock deadlock in ip4_datagram_connect() wrt. statistic
bumping, this one has been with us for a while. From Eric Dumazet.
12) Fix NULL deref in the new TIPC fragmentation handling, from Erik
Hugne.
13) 6lowpan bit used for traffic classification was wrong, from Jukka
Rissanen.
14) macvlan has the same issue as normal vlans did wrt. propagating LRO
disabling down to the real device, fix it the same way. From Michal
Kubecek.
15) CPSW driver needs to soft reset all slaves during suspend, from
Daniel Mack.
16) Fix small frame pacing in FQ packet scheduler, from Eric Dumazet.
17) The xen-netfront RX buffer refill timer isn't properly scheduled on
partial RX allocation success, from Ma JieYue.
18) When ipv6 ping protocol support was added, the AF_INET6 protocol
initialization cleanup path on failure was borked a little. Fix
from Vlad Yasevich.
19) If a socket disconnects during a read/recvmsg/recvfrom/etc that
blocks we can do the wrong thing with the msg_name we write back to
userspace. From Hannes Frederic Sowa. There is another fix in the
works from Hannes which will prevent future problems of this nature.
20) Fix route leak in VTI tunnel transmit, from Fan Du.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits)
genetlink: make multicast groups const, prevent abuse
genetlink: pass family to functions using groups
genetlink: add and use genl_set_err()
genetlink: remove family pointer from genl_multicast_group
genetlink: remove genl_unregister_mc_group()
hsr: don't call genl_unregister_mc_group()
quota/genetlink: use proper genetlink multicast APIs
drop_monitor/genetlink: use proper genetlink multicast APIs
genetlink: only pass array to genl_register_family_with_ops()
tcp: don't update snd_nxt, when a socket is switched from repair mode
atm: idt77252: fix dev refcnt leak
xfrm: Release dst if this dst is improper for vti tunnel
netlink: fix documentation typo in netlink_set_err()
be2net: Delete secondary unicast MAC addresses during be_close
be2net: Fix unconditional enabling of Rx interface options
net, virtio_net: replace the magic value
ping: prevent NULL pointer dereference on write to msg_name
bnx2x: Prevent "timeout waiting for state X"
bnx2x: prevent CFC attention
bnx2x: Prevent panic during DMAE timeout
...
<linux/spinlock.h> has heavy dependencies on other header files.
It triggers circular dependencies in generated headers on IA64, at
least:
CC kernel/bounds.s
In file included from /home/space/kas/git/public/linux/arch/ia64/include/asm/thread_info.h:9:0,
from include/linux/thread_info.h:54,
from include/asm-generic/preempt.h:4,
from arch/ia64/include/generated/asm/preempt.h:1,
from include/linux/preempt.h:18,
from include/linux/spinlock.h:50,
from kernel/bounds.c:14:
/home/space/kas/git/public/linux/arch/ia64/include/asm/asm-offsets.h:1:35: fatal error: generated/asm-offsets.h: No such file or directory
compilation terminated.
Let's replace <linux/spinlock.h> with <linux/spinlock_types.h>, it's
enough to find out size of spinlock_t.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-and-Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
As suggested by David Miller, make genl_register_family_with_ops()
a macro and pass only the array, evaluating ARRAY_SIZE() in the
macro, this is a little safer.
The openvswitch has some indirection, assing ops/n_ops directly in
that code. This might ultimately just assign the pointers in the
family initializations, saving the struct genl_family_and_ops and
code (once mcast groups are handled differently.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull irq cleanups from Ingo Molnar:
"This is a multi-arch cleanup series from Thomas Gleixner, which we
kept to near the end of the merge window, to not interfere with
architecture updates.
This series (motivated by the -rt kernel) unifies more aspects of IRQ
handling and generalizes PREEMPT_ACTIVE"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
preempt: Make PREEMPT_ACTIVE generic
sparc: Use preempt_schedule_irq
ia64: Use preempt_schedule_irq
m32r: Use preempt_schedule_irq
hardirq: Make hardirq bits generic
m68k: Simplify low level interrupt handling code
genirq: Prevent spurious detection for unconditionally polled interrupts
There was a reported deadlock on -rt which lockdep didn't report.
It turns out that in irq_exit() we tell lockdep that the hardirq
context ends and then do all kinds of locking afterwards.
To fix it, move trace_hardirq_exit() to the very end of irq_exit(), this
ensures all locking in tick_irq_exit() and rcu_irq_exit() are properly
recorded as happening from hardirq context.
This however leads to the 'fun' little problem of running softirqs
while in hardirq context. To cure this make the softirq code a little
more complex (in the CONFIG_TRACE_IRQFLAGS case).
Due to stack swizzling arch dependent trickery we cannot pass an
argument to __do_softirq() to tell it if it was done from hardirq
context or not; so use a side-band argument.
When we do __do_softirq() from hardirq context, 'atomically' flip to
softirq context and back, so that no locking goes without being in
either hard- or soft-irq context.
I didn't find any new problems in mainline using this patch, but it
did show the -rt problem.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-dgwc5cdksbn0jk09vbmcc9sa@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 37dc6b50ce ("sched: Remove unnecessary iteration over sched
domains to update nr_busy_cpus") forgot to clear 'sd_busy' under some
conditions leading to a possible NULL deref in set_cpu_sd_state_idle().
Reported-by: Anton Blanchard <anton@samba.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131118113701.GF3866@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After commit 863bffc808 ("sched/fair: Fix group power_orig
computation"), we can dereference rq->sd before it is set.
Fix this by falling back to power_of() in this case and add a comment
explaining things.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
[ Added comment and tweaked patch. ]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: mikey@neuling.org
Link: http://lkml.kernel.org/r/20131113151718.GN21461@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The 64-bit attr.config value for perf trace events was being copied into
an "int" before doing a comparison, meaning the top 32 bits were
being truncated.
As far as I can tell this didn't cause any errors, but it did mean
it was possible to create valid aliases for all the tracepoint ids
which I don't think was intended. (For example, 0xffffffff00000018
and 0x18 both enable the same tracepoint).
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1311151236100.11932@vincent-weaver-1.um.maine.edu
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently we only allocate a single cpu hashtable for per-cpu
swevents; do away with this optimization for it is fragile in the face
of things like perf_pmu_migrate_context().
The easiest thing is to make sure all CPUs are consistent wrt state.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130913111447.GN31370@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vince's perf-trinity fuzzer found yet another 'interesting' problem.
When we sample the irq_work_exit tracepoint with period==1 (or
PERF_SAMPLE_PERIOD) and we add an fasync SIGNAL handler we create an
infinite event generation loop:
,-> <IPI>
| irq_work_exit() ->
| trace_irq_work_exit() ->
| ...
| __perf_event_overflow() -> (due to fasync)
| irq_work_queue() -> (irq_work_list must be empty)
'--------- arch_irq_work_raise()
Similar things can happen due to regular poll() wakeups if we exceed
the ring-buffer wakeup watermark, or have an event_limit.
To avoid this, dis-allow sampling this particular tracepoint.
In order to achieve this, create a special perf_perm function pointer
for each event and call this (when set) on trying to create a
tracepoint perf event.
[ roasted: use expr... to allow for ',' in your expression ]
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20131114152304.GC5364@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use the helper function instead of __GFP_ZERO.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
RCU and the fine grained idle time accounting functions check
tick_nohz_enabled. But that variable is merily telling that NOHZ has
been enabled in the config and not been disabled on the command line.
But it does not tell anything about nohz being active. That's what all
this should check for.
Matthew reported, that the idle accounting on his old P1 machine
showed bogus values, when he enabled NOHZ in the config and did not
disable it on the kernel command line. The reason is that his machine
uses (refined) jiffies as a clocksource which explains why the "fine"
grained accounting went into lala land, because it depends on when the
system goes and leaves idle relative to the jiffies increment.
Provide a tick_nohz_active indicator and let RCU and the accounting
code use this instead of tick_nohz_enable.
Reported-and-tested-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: john.stultz@linaro.org
Cc: mwhitehe@redhat.com
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311132052240.30673@ionos.tec.linutronix.de
The only real feature that was added this release is from Namhyung Kim,
who introduced "set_graph_notrace" filter that lets you run the function
graph tracer and not trace particular functions and their call chain.
Tom Zanussi added some updates to the ftrace multibuffer tracing that
made it more consistent with the top level tracing.
One of the fixes for perf function tracing required an API change in
RCU; the addition of "rcu_is_watching()". As Paul McKenney is pushing
that change in this release too, he gave me a branch that included
all the changes to get that working, and I pulled that into my tree
in order to complete the perf function tracing fix.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSgX5SAAoJEKQekfcNnQGulUAH/jORqJrKaNAulmZ314VsAqfa
zMtF5UAAPf7kqc3AN/jtFrhJUNEfxWOo7A4r0FsM/rKdWJF+98GA6aqYVD+XoWFt
+36fg1enxbXUjixQ96Uh+o1+BJUgYDqljuWzqSu/oiXWfWwl8+WL4kcbhb+V9WcF
SpdzLCWVZRfhyDiN3+0zvyQ8RSG2Pd7CWn9zroI0e4sxGo0Ki6JUnIcXtZGOBDOQ
IIZdjXvGSfpJ+3u3XvRPXJcltRCtOsVWxYzrmvRlmHDW5QMe1+WmmrlojTePrLaJ
xn8+3WINqetAR+ZQnazbpt1XzJzKa8QtFgpiN0kT6qL7cg3N1Owc4vLGohl7wok=
=Nesf
-----END PGP SIGNATURE-----
Merge tag 'trace-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing update from Steven Rostedt:
"This batch of changes is mostly clean ups and small bug fixes. The
only real feature that was added this release is from Namhyung Kim,
who introduced "set_graph_notrace" filter that lets you run the
function graph tracer and not trace particular functions and their
call chain.
Tom Zanussi added some updates to the ftrace multibuffer tracing that
made it more consistent with the top level tracing.
One of the fixes for perf function tracing required an API change in
RCU; the addition of "rcu_is_watching()". As Paul McKenney is pushing
that change in this release too, he gave me a branch that included all
the changes to get that working, and I pulled that into my tree in
order to complete the perf function tracing fix"
* tag 'trace-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Add rcu annotation for syscall trace descriptors
tracing: Do not use signed enums with unsigned long long in fgragh output
tracing: Remove unused function ftrace_off_permanent()
tracing: Do not assign filp->private_data to freed memory
tracing: Add helper function tracing_is_disabled()
tracing: Open tracer when ftrace_dump_on_oops is used
tracing: Add support for SOFT_DISABLE to syscall events
tracing: Make register/unregister_ftrace_command __init
tracing: Update event filters for multibuffer
recordmcount.pl: Add support for __fentry__
ftrace: Have control op function callback only trace when RCU is watching
rcu: Do not trace rcu_is_watching() functions
ftrace/x86: skip over the breakpoint for ftrace caller
trace/trace_stat: use rbtree postorder iteration helper instead of opencoding
ftrace: Add set_graph_notrace filter
ftrace: Narrow down the protected area of graph_lock
ftrace: Introduce struct ftrace_graph_data
ftrace: Get rid of ftrace_graph_filter_enabled
tracing: Fix potential out-of-bounds in trace_get_user()
tracing: Show more exact help information about snapshot
Rename simple_delete_dentry() to always_delete_dentry() and export it.
Export simple_dentry_operations, while we are at it, and get rid of
their duplicates
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull trivial tree updates from Jiri Kosina:
"Usual earth-shaking, news-breaking, rocket science pile from
trivial.git"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits)
doc: usb: Fix typo in Documentation/usb/gadget_configs.txt
doc: add missing files to timers/00-INDEX
timekeeping: Fix some trivial typos in comments
mm: Fix some trivial typos in comments
irq: Fix some trivial typos in comments
NUMA: fix typos in Kconfig help text
mm: update 00-INDEX
doc: Documentation/DMA-attributes.txt fix typo
DRM: comment: `halve' -> `half'
Docs: Kconfig: `devlopers' -> `developers'
doc: typo on word accounting in kprobes.c in mutliple architectures
treewide: fix "usefull" typo
treewide: fix "distingush" typo
mm/Kconfig: Grammar s/an/a/
kexec: Typo s/the/then/
Documentation/kvm: Update cpuid documentation for steal time and pv eoi
treewide: Fix common typo in "identify"
__page_to_pfn: Fix typo in comment
Correct some typos for word frequency
clk: fixed-factor: Fix a trivial typo
...
side: the HV and emulation flavors can now coexist in a single kernel
is probably the most interesting change from a user point of view.
On the x86 side there are nested virtualization improvements and a
few bugfixes. ARM got transparent huge page support, improved
overcommit, and support for big endian guests.
Finally, there is a new interface to connect KVM with VFIO. This
helps with devices that use NoSnoop PCI transactions, letting the
driver in the guest execute WBINVD instructions. This includes
some nVidia cards on Windows, that fail to start without these
patches and the corresponding userspace changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=rWNf
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM changes from Paolo Bonzini:
"Here are the 3.13 KVM changes. There was a lot of work on the PPC
side: the HV and emulation flavors can now coexist in a single kernel
is probably the most interesting change from a user point of view.
On the x86 side there are nested virtualization improvements and a few
bugfixes.
ARM got transparent huge page support, improved overcommit, and
support for big endian guests.
Finally, there is a new interface to connect KVM with VFIO. This
helps with devices that use NoSnoop PCI transactions, letting the
driver in the guest execute WBINVD instructions. This includes some
nVidia cards on Windows, that fail to start without these patches and
the corresponding userspace changes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (146 commits)
kvm, vmx: Fix lazy FPU on nested guest
arm/arm64: KVM: PSCI: propagate caller endianness to the incoming vcpu
arm/arm64: KVM: MMIO support for BE guest
kvm, cpuid: Fix sparse warning
kvm: Delete prototype for non-existent function kvm_check_iopl
kvm: Delete prototype for non-existent function complete_pio
hung_task: add method to reset detector
pvclock: detect watchdog reset at pvclock read
kvm: optimize out smp_mb after srcu_read_unlock
srcu: API for barrier after srcu read unlock
KVM: remove vm mmap method
KVM: IOMMU: hva align mapping page size
KVM: x86: trace cpuid emulation when called from emulator
KVM: emulator: cleanup decode_register_operand() a bit
KVM: emulator: check rex prefix inside decode_register()
KVM: x86: fix emulation of "movzbl %bpl, %eax"
kvm_host: typo fix
KVM: x86: emulate SAHF instruction
MAINTAINERS: add tree for kvm.git
Documentation/kvm: add a 00-INDEX file
...
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We've switched over every architecture that supports SMP to it, so
remove the new useless config variable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit was incomplete in that code to remove items from the per-cpu
lists was missing and never acquired a user in the 5 years it has been in
the tree. We're going to implement what it seems to try to archive in a
simpler way, and this code is in the way of doing so.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use kernel/bounds.c to convert build-time spinlock_t size check into a
preprocessor symbol and apply that to properly separate the page::ptl
situation.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The basic idea is the same as with PTE level: the lock is embedded into
struct page of table's page.
We can't use mm->pmd_huge_pte to store pgtables for THP, since we don't
take mm->page_table_lock anymore. Let's reuse page->lru of table's page
for that.
pgtable_pmd_page_ctor() returns true, if initialization is successful
and false otherwise. Current implementation never fails, but assumption
that constructor can fail will help to port it to -rt where spinlock_t
is rather huge and cannot be embedded into struct page -- dynamic
allocation is required.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Alex Thorlton <athorlton@sgi.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Jones <davej@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Robin Holt <robinmholt@gmail.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I have received a report about the BUG_ON() in free_basic_memory_bitmaps()
triggering mysteriously during an aborted s2disk hibernation attempt.
The only way I can explain that is that /dev/snapshot was first
opened for writing (resume mode), then closed and then opened again
for reading and closed again without freezing tasks. In that case
the first invocation of snapshot_open() would set the free_bitmaps
flag in snapshot_state, which is a static variable. That flag
wouldn't be cleared later and the second invocation of snapshot_open()
would just leave it like that, so the subsequent snapshot_release()
would see data->frozen set and free_basic_memory_bitmaps() would be
called unnecessarily.
To prevent that from happening clear data->free_bitmaps in
snapshot_open() when the file is being opened for reading (hibernate
mode).
In addition to that, replace the BUG_ON() in free_basic_memory_bitmaps()
with a WARN_ON() as the kernel can continue just fine if the condition
checked by that macro occurs.
Fixes: aab1728915 (PM / hibernate: Fix user space driven resume regression)
Reported-by: Oliver Lorenz <olli@olorenz.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
Now that genl_ops are no longer modified in place when
registering, they can be made const. This patch was done
mostly with spatch:
@@
identifier ops;
@@
+const
struct genl_ops ops[] = {
...
};
(except the struct thing in net/openvswitch/datapath.c)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This simplifies the code since there's no longer a
need to have error handling in the registration.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull core locking changes from Ingo Molnar:
"The biggest changes:
- add lockdep support for seqcount/seqlocks structures, this
unearthed both bugs and required extra annotation.
- move the various kernel locking primitives to the new
kernel/locking/ directory"
* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
block: Use u64_stats_init() to initialize seqcounts
locking/lockdep: Mark __lockdep_count_forward_deps() as static
lockdep/proc: Fix lock-time avg computation
locking/doc: Update references to kernel/mutex.c
ipv6: Fix possible ipv6 seqlock deadlock
cpuset: Fix potential deadlock w/ set_mems_allowed
seqcount: Add lockdep functionality to seqcount/seqlock structures
net: Explicitly initialize u64_stats_sync structures for lockdep
locking: Move the percpu-rwsem code to kernel/locking/
locking: Move the lglocks code to kernel/locking/
locking: Move the rwsem code to kernel/locking/
locking: Move the rtmutex code to kernel/locking/
locking: Move the semaphore core to kernel/locking/
locking: Move the spinlock code to kernel/locking/
locking: Move the lockdep code to kernel/locking/
locking: Move the mutex code to kernel/locking/
hung_task debugging: Add tracepoint to report the hang
x86/locking/kconfig: Update paravirt spinlock Kconfig description
lockstat: Report avg wait and hold times
lockdep, x86/alternatives: Drop ancient lockdep fixup message
...
- New power capping framework and the the Intel Running Average Power
Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.
- Addition of the in-kernel switching feature to the arm_big_little
cpufreq driver from Viresh Kumar and Nicolas Pitre.
- cpufreq support for iMac G5 from Aaro Koskinen.
- Baytrail processors support for intel_pstate from Dirk Brandewie.
- cpufreq support for Midway/ECX-2000 from Mark Langsdorf.
- ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.
- ACPI power management support for the I2C and SPI bus types from
Mika Westerberg and Lv Zheng.
- cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.
- cpufreq drivers updates (mostly fixes and cleanups) from Viresh Kumar,
Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz Majewski,
Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.
- intel_pstate updates from Dirk Brandewie and Adrian Huang.
- ACPICA update to version 20130927 includig fixes and cleanups and
some reduction of divergences between the ACPICA code in the kernel
and ACPICA upstream in order to improve the automatic ACPICA patch
generation process. From Bob Moore, Lv Zheng, Tomasz Nowicki,
Naresh Bhat, Bjorn Helgaas, David E Box.
- ACPI IPMI driver fixes and cleanups from Lv Zheng.
- ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani,
Zhang Yanfei, Rafael J Wysocki.
- Conversion of the ACPI AC driver to the platform bus type and
multiple driver fixes and cleanups related to ACPI from Zhang Rui.
- ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.
- Fixes and cleanups and new blacklist entries related to the ACPI
video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
Kirill Tkhai.
- cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.
- cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
Bartlomiej Zolnierkiewicz, Prarit Bhargava.
- devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.
- Operation Performance Points (OPP) core updates from Nishanth Menon.
- Runtime power management core fix from Rafael J Wysocki and update
from Ulf Hansson.
- Hibernation fixes from Aaron Lu and Rafael J Wysocki.
- Device suspend/resume lockup detection mechanism from Benoit Goby.
- Removal of unused proc directories created for various ACPI drivers
from Lan Tianyu.
- ACPI LPSS driver fix and new device IDs for the ACPI platform scan
handler from Heikki Krogerus and Jarkko Nikula.
- New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.
- Assorted fixes and cleanups related to ACPI from Andy Shevchenko,
Al Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
Liu Chuansheng.
- Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
Jean-Christophe Plagniol-Villard.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=JCxk
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael J Wysocki:
- New power capping framework and the the Intel Running Average Power
Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.
- Addition of the in-kernel switching feature to the arm_big_little
cpufreq driver from Viresh Kumar and Nicolas Pitre.
- cpufreq support for iMac G5 from Aaro Koskinen.
- Baytrail processors support for intel_pstate from Dirk Brandewie.
- cpufreq support for Midway/ECX-2000 from Mark Langsdorf.
- ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.
- ACPI power management support for the I2C and SPI bus types from Mika
Westerberg and Lv Zheng.
- cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.
- cpufreq drivers updates (mostly fixes and cleanups) from Viresh
Kumar, Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz
Majewski, Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.
- intel_pstate updates from Dirk Brandewie and Adrian Huang.
- ACPICA update to version 20130927 includig fixes and cleanups and
some reduction of divergences between the ACPICA code in the kernel
and ACPICA upstream in order to improve the automatic ACPICA patch
generation process. From Bob Moore, Lv Zheng, Tomasz Nowicki, Naresh
Bhat, Bjorn Helgaas, David E Box.
- ACPI IPMI driver fixes and cleanups from Lv Zheng.
- ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani, Zhang
Yanfei, Rafael J Wysocki.
- Conversion of the ACPI AC driver to the platform bus type and
multiple driver fixes and cleanups related to ACPI from Zhang Rui.
- ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.
- Fixes and cleanups and new blacklist entries related to the ACPI
video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
Kirill Tkhai.
- cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.
- cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
Bartlomiej Zolnierkiewicz, Prarit Bhargava.
- devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.
- Operation Performance Points (OPP) core updates from Nishanth Menon.
- Runtime power management core fix from Rafael J Wysocki and update
from Ulf Hansson.
- Hibernation fixes from Aaron Lu and Rafael J Wysocki.
- Device suspend/resume lockup detection mechanism from Benoit Goby.
- Removal of unused proc directories created for various ACPI drivers
from Lan Tianyu.
- ACPI LPSS driver fix and new device IDs for the ACPI platform scan
handler from Heikki Krogerus and Jarkko Nikula.
- New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.
- Assorted fixes and cleanups related to ACPI from Andy Shevchenko, Al
Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
Liu Chuansheng.
- Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
Jean-Christophe Plagniol-Villard.
* tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (386 commits)
cpufreq: conservative: fix requested_freq reduction issue
ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines
PM / runtime: Use pm_runtime_put_sync() in __device_release_driver()
ACPI / event: remove unneeded NULL pointer check
Revert "ACPI / video: Ignore BIOS initial backlight value for HP 250 G1"
ACPI / video: Quirk initial backlight level 0
ACPI / video: Fix initial level validity test
intel_pstate: skip the driver if ACPI has power mgmt option
PM / hibernate: Avoid overflow in hibernate_preallocate_memory()
ACPI / hotplug: Do not execute "insert in progress" _OST
ACPI / hotplug: Carry out PCI root eject directly
ACPI / hotplug: Merge device hot-removal routines
ACPI / hotplug: Make acpi_bus_hot_remove_device() internal
ACPI / hotplug: Simplify device ejection routines
ACPI / hotplug: Fix handle_root_bridge_removal()
ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug
ACPI / scan: Start matching drivers after trying scan handlers
ACPI: Remove acpi_pci_slot_init() headers from internal.h
ACPI / blacklist: fix name of ThinkPad Edge E530
PowerCap: Fix build error with option -Werror=format-security
...
Conflicts:
arch/arm/mach-omap2/opp.c
drivers/Kconfig
drivers/spi/spi.c
Pull block IO core updates from Jens Axboe:
"This is the pull request for the core changes in the block layer for
3.13. It contains:
- The new blk-mq request interface.
This is a new and more scalable queueing model that marries the
best part of the request based interface we currently have (which
is fully featured, but scales poorly) and the bio based "interface"
which the new drivers for high IOPS devices end up using because
it's much faster than the request based one.
The bio interface has no block layer support, since it taps into
the stack much earlier. This means that drivers end up having to
implement a lot of functionality on their own, like tagging,
timeout handling, requeue, etc. The blk-mq interface provides all
these. Some drivers even provide a switch to select bio or rq and
has code to handle both, since things like merging only works in
the rq model and hence is faster for some workloads. This is a
huge mess. Conversion of these drivers nets us a substantial code
reduction. Initial results on converting SCSI to this model even
shows an 8x improvement on single queue devices. So while the
model was intended to work on the newer multiqueue devices, it has
substantial improvements for "classic" hardware as well. This code
has gone through extensive testing and development, it's now ready
to go. A pull request is coming to convert virtio-blk to this
model will be will be coming as well, with more drivers scheduled
for 3.14 conversion.
- Two blktrace fixes from Jan and Chen Gang.
- A plug merge fix from Alireza Haghdoost.
- Conversion of __get_cpu_var() from Christoph Lameter.
- Fix for sector_div() with 64-bit divider from Geert Uytterhoeven.
- A fix for a race between request completion and the timeout
handling from Jeff Moyer. This is what caused the merge conflict
with blk-mq/core, in case you are looking at that.
- A dm stacking fix from Mike Snitzer.
- A code consolidation fix and duplicated code removal from Kent
Overstreet.
- A handful of block bug fixes from Mikulas Patocka, fixing a loop
crash and memory corruption on blk cg.
- Elevator switch bug fix from Tomoki Sekiyama.
A heads-up that I had to rebase this branch. Initially the immutable
bio_vecs had been queued up for inclusion, but a week later, it became
clear that it wasn't fully cooked yet. So the decision was made to
pull this out and postpone it until 3.14. It was a straight forward
rebase, just pruning out the immutable series and the later fixes of
problems with it. The rest of the patches applied directly and no
further changes were made"
* 'for-3.13/core' of git://git.kernel.dk/linux-block: (31 commits)
block: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
block: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
block: Do not call sector_div() with a 64-bit divisor
kernel: trace: blktrace: remove redundent memcpy() in compat_blk_trace_setup()
block: Consolidate duplicated bio_trim() implementations
block: Use rw_copy_check_uvector()
block: Enable sysfs nomerge control for I/O requests in the plug list
block: properly stack underlying max_segment_size to DM device
elevator: acquire q->sysfs_lock in elevator_change()
elevator: Fix a race in elevator switching and md device initialization
block: Replace __get_cpu_var uses
bdi: test bdi_init failure
block: fix a probe argument to blk_register_region
loop: fix crash if blk_alloc_queue fails
blk-core: Fix memory corruption if blkcg_init_queue fails
block: fix race between request completion and timeout handling
blktrace: Send BLK_TN_PROCESS events to all running traces
blk-mq: don't disallow request merges for req->special being set
blk-mq: mq plug list breakage
blk-mq: fix for flush deadlock
...
On a 68k platform a couple of interrupts are demultiplexed and
"polled" from a top level interrupt. Unfortunately there is no way to
determine which of the sub interrupts raised the top level interrupt,
so all of the demultiplexed interrupt handlers need to be
invoked. Given a high enough frequency this can trigger the spurious
interrupt detection mechanism, if one of the demultiplex interrupts
returns IRQ_NONE continuously. But this is a false positive as the
polling causes this behaviour and not buggy hardware/software.
Introduce IRQ_POLLED which can be set at interrupt chip setup time via
irq_set_status_flags(). The flag excludes the interrupt from the
spurious detector and from all core polling activities.
Reported-and-tested-by: Michael Schmitz <schmitzmic@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311061149250.23353@ionos.tec.linutronix.de
There are new Sparse warnings:
>> kernel/locking/lockdep.c:1235:15: sparse: symbol '__lockdep_count_forward_deps' was not declared. Should it be static?
>> kernel/locking/lockdep.c:1261:15: sparse: symbol '__lockdep_count_backward_deps' was not declared. Should it be static?
Please consider folding the attached diff :-)
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/527d1787.ThzXGoUspZWehFDl\%fengguang.wu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
sa->runnable_avg_sum is of type u32 but after shifting it by NICE_0_SHIFT
bits it is promoted to u64. This of course makes no sense, since the
result will never be more then 32-bit long. Casting sa->runnable_avg_sum
to u64 before it is shifted, fixes this problem.
Reviewed-by: Ben Segall <bsegall@google.com>
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1384112521-25177-1-git-send-email-mpn@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Large multi-threaded apps like to hit this using do_sys_times() and
then queue up on the rq->lock.
Avoid when possible.
Larry reported ~20% performance increase his test case.
Reported-by: Larry Woodman <lwoodman@redhat.com>
Suggested-by: Paul Turner <pjt@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20131111172925.GG26898@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Because we're completely unserialized against hotplug its well
possible to try and generate numa stats for an offlined node.
Bail out early (and avoid a /0) in this case. The resulting stats are
all 0 which should result in an undesirable balance target -- not to
mention that actually trying to migrate to an offline CPU will fail.
Reported-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Link: http://lkml.kernel.org/n/tip-orja0qylcvyhxfsuebcyL5sI@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The cpusets code can split up the scheduler's domain tree into
smaller domains. Some of those smaller domains may not cross
NUMA nodes at all, leading to a NULL pointer dereference on the
per-cpu sd_numa pointer.
Tasks cannot be migrated out of their domain, so the patch
also sets p->numa_preferred_nid to whereever they are, to
prevent the migration from being retried over and over again.
Reported-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Link: http://lkml.kernel.org/n/tip-oosqomw0Jput0Jkvoowhrqtu@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 6acce3ef8:
sched: Remove get_online_cpus() usage
tries to do sync_sched/rcu() inside _cpu_down() but triggers:
INFO: task swapper/0:1 blocked for more than 120 seconds.
...
[<ffffffff811263dc>] synchronize_rcu+0x2c/0x30
[<ffffffff81d1bd82>] _cpu_down+0x2b2/0x340
...
It was caused by that in the rcu boost case we rely on smpboot thread to
finish the rcu callback, which has already been parked before sync in here
and leads to the endless sync_sched/rcu().
This patch exchanges the sequence of smpboot_park_threads() and
sync_sched/rcu() to fix the bug.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5282EDC0.6060003@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull networking updates from David Miller:
1) The addition of nftables. No longer will we need protocol aware
firewall filtering modules, it can all live in userspace.
At the core of nftables is a, for lack of a better term, virtual
machine that executes byte codes to inspect packet or metadata
(arriving interface index, etc.) and make verdict decisions.
Besides support for loading packet contents and comparing them, the
interpreter supports lookups in various datastructures as
fundamental operations. For example sets are supports, and
therefore one could create a set of whitelist IP address entries
which have ACCEPT verdicts attached to them, and use the appropriate
byte codes to do such lookups.
Since the interpreted code is composed in userspace, userspace can
do things like optimize things before giving it to the kernel.
Another major improvement is the capability of atomically updating
portions of the ruleset. In the existing netfilter implementation,
one has to update the entire rule set in order to make a change and
this is very expensive.
Userspace tools exist to create nftables rules using existing
netfilter rule sets, but both kernel implementations will need to
co-exist for quite some time as we transition from the old to the
new stuff.
Kudos to Patrick McHardy, Pablo Neira Ayuso, and others who have
worked so hard on this.
2) Daniel Borkmann and Hannes Frederic Sowa made several improvements
to our pseudo-random number generator, mostly used for things like
UDP port randomization and netfitler, amongst other things.
In particular the taus88 generater is updated to taus113, and test
cases are added.
3) Support 64-bit rates in HTB and TBF schedulers, from Eric Dumazet
and Yang Yingliang.
4) Add support for new 577xx tigon3 chips to tg3 driver, from Nithin
Sujir.
5) Fix two fatal flaws in TCP dynamic right sizing, from Eric Dumazet,
Neal Cardwell, and Yuchung Cheng.
6) Allow IP_TOS and IP_TTL to be specified in sendmsg() ancillary
control message data, much like other socket option attributes.
From Francesco Fusco.
7) Allow applications to specify a cap on the rate computed
automatically by the kernel for pacing flows, via a new
SO_MAX_PACING_RATE socket option. From Eric Dumazet.
8) Make the initial autotuned send buffer sizing in TCP more closely
reflect actual needs, from Eric Dumazet.
9) Currently early socket demux only happens for TCP sockets, but we
can do it for connected UDP sockets too. Implementation from Shawn
Bohrer.
10) Refactor inet socket demux with the goal of improving hash demux
performance for listening sockets. With the main goals being able
to use RCU lookups on even request sockets, and eliminating the
listening lock contention. From Eric Dumazet.
11) The bonding layer has many demuxes in it's fast path, and an RCU
conversion was started back in 3.11, several changes here extend the
RCU usage to even more locations. From Ding Tianhong and Wang
Yufen, based upon suggestions by Nikolay Aleksandrov and Veaceslav
Falico.
12) Allow stackability of segmentation offloads to, in particular, allow
segmentation offloading over tunnels. From Eric Dumazet.
13) Significantly improve the handling of secret keys we input into the
various hash functions in the inet hashtables, TCP fast open, as
well as syncookies. From Hannes Frederic Sowa. The key fundamental
operation is "net_get_random_once()" which uses static keys.
Hannes even extended this to ipv4/ipv6 fragmentation handling and
our generic flow dissector.
14) The generic driver layer takes care now to set the driver data to
NULL on device removal, so it's no longer necessary for drivers to
explicitly set it to NULL any more. Many drivers have been cleaned
up in this way, from Jingoo Han.
15) Add a BPF based packet scheduler classifier, from Daniel Borkmann.
16) Improve CRC32 interfaces and generic SKB checksum iterators so that
SCTP's checksumming can more cleanly be handled. Also from Daniel
Borkmann.
17) Add a new PMTU discovery mode, IP_PMTUDISC_INTERFACE, which forces
using the interface MTU value. This helps avoid PMTU attacks,
particularly on DNS servers. From Hannes Frederic Sowa.
18) Use generic XPS for transmit queue steering rather than internal
(re-)implementation in virtio-net. From Jason Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits)
random32: add test cases for taus113 implementation
random32: upgrade taus88 generator to taus113 from errata paper
random32: move rnd_state to linux/random.h
random32: add prandom_reseed_late() and call when nonblocking pool becomes initialized
random32: add periodic reseeding
random32: fix off-by-one in seeding requirement
PHY: Add RTL8201CP phy_driver to realtek
xtsonic: add missing platform_set_drvdata() in xtsonic_probe()
macmace: add missing platform_set_drvdata() in mace_probe()
ethernet/arc/arc_emac: add missing platform_set_drvdata() in arc_emac_probe()
ipv6: protect for_each_sk_fl_rcu in mem_check with rcu_read_lock_bh
vlan: Implement vlan_dev_get_egress_qos_mask as an inline.
ixgbe: add warning when max_vfs is out of range.
igb: Update link modes display in ethtool
netfilter: push reasm skb through instead of original frag skbs
ip6_output: fragment outgoing reassembled skb properly
MAINTAINERS: mv643xx_eth: take over maintainership from Lennart
net_sched: tbf: support of 64bit rates
ixgbe: deleting dfwd stations out of order can cause null ptr deref
ixgbe: fix build err, num_rx_queues is only available with CONFIG_RPS
...
Merge first patch-bomb from Andrew Morton:
"Quite a lot of other stuff is banked up awaiting further
next->mainline merging, but this batch contains:
- Lots of random misc patches
- OCFS2
- Most of MM
- backlight updates
- lib/ updates
- printk updates
- checkpatch updates
- epoll tweaking
- rtc updates
- hfs
- hfsplus
- documentation
- procfs
- update gcov to gcc-4.7 format
- IPC"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (269 commits)
ipc, msg: fix message length check for negative values
ipc/util.c: remove unnecessary work pending test
devpts: plug the memory leak in kill_sb
./Makefile: export initial ramdisk compression config option
init/Kconfig: add option to disable kernel compression
drivers: w1: make w1_slave::flags long to avoid memory corruption
drivers/w1/masters/ds1wm.cuse dev_get_platdata()
drivers/memstick/core/ms_block.c: fix unreachable state in h_msb_read_page()
drivers/memstick/core/mspro_block.c: fix attributes array allocation
drivers/pps/clients/pps-gpio.c: remove redundant of_match_ptr
kernel/panic.c: reduce 1 byte usage for print tainted buffer
gcov: reuse kbasename helper
kernel/gcov/fs.c: use pr_warn()
kernel/module.c: use pr_foo()
gcov: compile specific gcov implementation based on gcc version
gcov: add support for gcc 4.7 gcov format
gcov: move gcov structs definitions to a gcc version specific file
kernel/taskstats.c: return -ENOMEM when alloc memory fails in add_del_listener()
kernel/taskstats.c: add nla_nest_cancel() for failure processing between nla_nest_start() and nla_nest_end()
kernel/sysctl_binary.c: use scnprintf() instead of snprintf()
...
Pull vfs updates from Al Viro:
"All kinds of stuff this time around; some more notable parts:
- RCU'd vfsmounts handling
- new primitives for coredump handling
- files_lock is gone
- Bruce's delegations handling series
- exportfs fixes
plus misc stuff all over the place"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (101 commits)
ecryptfs: ->f_op is never NULL
locks: break delegations on any attribute modification
locks: break delegations on link
locks: break delegations on rename
locks: helper functions for delegation breaking
locks: break delegations on unlink
namei: minor vfs_unlink cleanup
locks: implement delegations
locks: introduce new FL_DELEG lock flag
vfs: take i_mutex on renamed file
vfs: rename I_MUTEX_QUOTA now that it's not used for quotas
vfs: don't use PARENT/CHILD lock classes for non-directories
vfs: pull ext4's double-i_mutex-locking into common code
exportfs: fix quadratic behavior in filehandle lookup
exportfs: better variable name
exportfs: move most of reconnect_path to helper function
exportfs: eliminate unused "noprogress" counter
exportfs: stop retrying once we race with rename/remove
exportfs: clear DISCONNECTED on all parents sooner
exportfs: more detailed comment for path_reconnect
...
Pull cgroup changes from Tejun Heo:
"Not too much activity this time around. css_id is finally killed and
a minor update to device_cgroup"
* 'for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
device_cgroup: remove can_attach
cgroup: kill css_id
memcg: stop using css id
memcg: fail to create cgroup if the cgroup id is too big
memcg: convert to use cgroup id
memcg: convert to use cgroup_is_descendant()
sizeof("Tainted: ") already counts '\0', and after first sprintf(), 's'
will start from the current string end (its' value is '\0').
So need not add additional 1 byte for maximized usage of 'buf' in
print_tainted().
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To get name of the file from a pathname let's use kbasename() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kernel/module.c uses a mix of printk(KERN_foo and pr_foo(). Convert it
all to pr_foo and make the offered cleanups.
Not sure what to do about the printk(KERN_DEFAULT). We don't have a
pr_default().
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Joe Perches <joe@perches.com>
Cc: Frantisek Hrbata <fhrbata@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The gcov in-memory format changed in gcc 4.7. The biggest change, which
requires this special implementation, is that gcov_info no longer contains
array of counters for each counter type for all functions and gcov_fn_info
is not used for mapping of function's counters to these arrays(offset).
Now each gcov_fn_info contans it's counters, which makes things a little
bit easier.
This is heavily based on the previous gcc_3_4.c implementation and patches
provided by Peter Oberparleiter. Specially the buffer gcda implementation
for iterator.
[akpm@linux-foundation.org: use kmemdup() and kcalloc()]
[oberpar@linux.vnet.ibm.com: gcc_4_7.c needs vmalloc.h]
Signed-off-by: Frantisek Hrbata <fhrbata@redhat.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Gospodarek <agospoda@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since also the gcov structures(gcov_info, gcov_fn_info, gcov_ctr_info) can
change between gcc releases, as shown in gcc 4.7, they cannot be defined
in a common header and need to be moved to a specific gcc implemention
file. This also requires to make the gcov_info structure opaque for the
common code and to introduce simple helpers for accessing data inside
gcov_info.
Signed-off-by: Frantisek Hrbata <fhrbata@redhat.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Gospodarek <agospoda@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For registering in add_del_listener(), when kmalloc_node() fails, need
return -ENOMEM instead of success code, and cmd_attr_register_cpumask()
wants to know about it.
After modification, give a simple common test "build -> boot up ->
kernel/controllers/cgroup/getdelays by LTP tools".
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When failure occurs between nla_nest_start() and nla_nest_end(), we should
call nla_nest_cancel() to clean up related things.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
snprintf() will return the 'ideal' length which may be larger than real
buffer length, if we only want to use real length, need use scnprintf()
instead of.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Need to check the return value of proc_put_char(), as was done in
__do_proc_doulongvec_minmax().
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The get_dumpable() return value is not boolean. Most users of the
function actually want to be testing for non-SUID_DUMP_USER(1) rather than
SUID_DUMP_DISABLE(0). The SUID_DUMP_ROOT(2) is also considered a
protected state. Almost all places did this correctly, excepting the two
places fixed in this patch.
Wrong logic:
if (dumpable == SUID_DUMP_DISABLE) { /* be protective */ }
or
if (dumpable == 0) { /* be protective */ }
or
if (!dumpable) { /* be protective */ }
Correct logic:
if (dumpable != SUID_DUMP_USER) { /* be protective */ }
or
if (dumpable != 1) { /* be protective */ }
Without this patch, if the system had set the sysctl fs/suid_dumpable=2, a
user was able to ptrace attach to processes that had dropped privileges to
that user. (This may have been partially mitigated if Yama was enabled.)
The macros have been moved into the file that declares get/set_dumpable(),
which means things like the ia64 code can see them too.
CVE-2013-2929
Reported-by: Vasily Kulikov <segoon@openwall.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use KSYM_NAME_LEN to size identifier buffers, so that it can be easier
increased.
Signed-off-by: Joe Mario <jmario@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add two trivial helpers list_next_entry() and list_prev_entry(), they
can have a lot of users including list.h itself. In fact the 1st one is
already defined in events/core.c and bnx2x_sp.c, so the patch simply
moves the definition to list.h.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In one of those comments a typo was fixed, too.
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
boot_delay does not work for earlyprintk because the kernel cmdline
parsing is late.
Change to use early_param so early kernel messages can also be delayed.
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reports the names of consoles as they're being disabled to help
identify which is which during cut-over. Helps answer the question
"which boot console actually got activated?" once the regular console is
running, mostly when debugging boot console failures.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 15d94b8256 ("reboot: move shutdown/reboot related functions to
kernel/reboot.c") moved all kexec-related functionality to
kernel/reboot.c, so kernel/sys.c no longer needs to include
<linux/kexec.h>.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Robin Holt <holt@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The wrapper function delayacct_add_tsk() already checked 'tsk->delays',
and __delayacct_add_tsk() has no another direct callers, so can remove the
redundancy checking code.
And the label 'done' is also useless, so remove it, too.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
cpu_up() has #ifdef CONFIG_MEMORY_HOTPLUG code blocks, which call
mem_online_node() to put its node online if offlined and then call
build_all_zonelists() to initialize the zone list.
These steps are specific to memory hotplug, and should be managed in
mm/memory_hotplug.c. lock_memory_hotplug() should also be held for the
whole steps.
For this reason, this patch replaces mem_online_node() with
try_online_node(), which performs the whole steps with
lock_memory_hotplug() held. try_online_node() is named after
try_offline_node() as they have similar purpose.
There is no functional change in this patch.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Any user process callers of wait_for_completion() except global init
process might be chosen by the OOM killer while waiting for completion()
call by some other process which does memory allocation. See
CVE-2012-4398 "kernel: request_module() OOM local DoS" can happen.
When such users are chosen by the OOM killer when they are waiting for
completion() in TASK_UNINTERRUPTIBLE, the system will be kept stressed
due to memory starvation because the OOM killer cannot kill such users.
kthread_create() is one of such users and this patch fixes the problem
for kthreadd by making kthread_create() killable - the same approach
used for fixing CVE-2012-4398.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
usual for this cycle with lots of clean-up.
- Cross arch clean-up and consolidation of early DT scanning code.
- Clean-up and removal of arch prom.h headers. Makes arch specific
prom.h optional on all but Sparc.
- Addition of interrupts-extended property for devices connected to
multiple interrupt controllers.
- Refactoring of DT interrupt parsing code in preparation for deferred
probe of interrupts.
- ARM cpu and cpu topology bindings documentation.
- Various DT vendor binding documentation updates.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJSgPQ4AAoJEMhvYp4jgsXif28H/1WkrXq5+lCFQZF8nbYdE2h0
R8PsfiJJmAl6/wFgQTsRel+ScMk2hiP08uTyqf2RLnB1v87gCF7MKVaLOdONfUDi
huXbcQGWCmZv0tbBIklxJe3+X3FIJch4gnyUvPudD1m8a0R0LxWXH/NhdTSFyB20
PNjhN/IzoN40X1PSAhfB5ndWnoxXBoehV/IVHVDU42vkPVbVTyGAw5qJzHW8CLyN
2oGTOalOO4ffQ7dIkBEQfj0mrgGcODToPdDvUQyyGZjYK2FY2sGrjyquir6SDcNa
Q4gwatHTu0ygXpyphjtQf5tc3ZCejJ/F0s3olOAS1ahKGfe01fehtwPRROQnCK8=
=GCbY
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DeviceTree updates for 3.13. This is a bit larger pull request than
usual for this cycle with lots of clean-up.
- Cross arch clean-up and consolidation of early DT scanning code.
- Clean-up and removal of arch prom.h headers. Makes arch specific
prom.h optional on all but Sparc.
- Addition of interrupts-extended property for devices connected to
multiple interrupt controllers.
- Refactoring of DT interrupt parsing code in preparation for
deferred probe of interrupts.
- ARM cpu and cpu topology bindings documentation.
- Various DT vendor binding documentation updates"
* tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits)
powerpc: add missing explicit OF includes for ppc
dt/irq: add empty of_irq_count for !OF_IRQ
dt: disable self-tests for !OF_IRQ
of: irq: Fix interrupt-map entry matching
MIPS: Netlogic: replace early_init_devtree() call
of: Add Panasonic Corporation vendor prefix
of: Add Chunghwa Picture Tubes Ltd. vendor prefix
of: Add AU Optronics Corporation vendor prefix
of/irq: Fix potential buffer overflow
of/irq: Fix bug in interrupt parsing refactor.
of: set dma_mask to point to coherent_dma_mask
of: add vendor prefix for PHYTEC Messtechnik GmbH
DT: sort vendor-prefixes.txt
of: Add vendor prefix for Cadence
of: Add empty for_each_available_child_of_node() macro definition
arm/versatile: Fix versatile irq specifications.
of/irq: create interrupts-extended property
microblaze/pci: Drop PowerPC-ism from irq parsing
of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code.
of/irq: Use irq_of_parse_and_map()
...
Pull x86 UV debug changes from Ingo Molnar:
"Various SGI UV debuggability improvements, amongst them KDB support,
with related core KDB enabling patches changing kernel/debug/kdb/"
* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "x86/UV: Add uvtrace support"
x86/UV: Add call to KGDB/KDB from NMI handler
kdb: Add support for external NMI handler to call KGDB/KDB
x86/UV: Check for alloc_cpumask_var() failures properly in uv_nmi_setup()
x86/UV: Add uvtrace support
x86/UV: Add kdump to UV NMI handler
x86/UV: Add summary of cpu activity to UV NMI handler
x86/UV: Update UV support for external NMI signals
x86/UV: Move NMI support
Pull timer changes from Ingo Molnar:
"Main changes in this cycle were:
- Updated full dynticks support.
- Event stream support for architected (ARM) timers.
- ARM clocksource driver updates.
- Move arm64 to using the generic sched_clock framework & resulting
cleanup in the generic sched_clock code.
- Misc fixes and cleanups"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
x86/time: Honor ACPI FADT flag indicating absence of a CMOS RTC
clocksource: sun4i: remove IRQF_DISABLED
clocksource: sun4i: Report the minimum tick that we can program
clocksource: sun4i: Select CLKSRC_MMIO
clocksource: Provide timekeeping for efm32 SoCs
clocksource: em_sti: convert to clk_prepare/unprepare
time: Fix signedness bug in sysfs_get_uname() and its callers
timekeeping: Fix some trivial typos in comments
alarmtimer: return EINVAL instead of ENOTSUPP if rtcdev doesn't exist
clocksource: arch_timer: Do not register arch_sys_counter twice
timer stats: Add a 'Collection: active/inactive' line to timer usage statistics
sched_clock: Remove sched_clock_func() hook
arch_timer: Move to generic sched_clock framework
clocksource: tcb_clksrc: Remove IRQF_DISABLED
clocksource: tcb_clksrc: Improve driver robustness
clocksource: tcb_clksrc: Replace clk_enable/disable with clk_prepare_enable/disable_unprepare
clocksource: arm_arch_timer: Use clocksource for suspend timekeeping
clocksource: dw_apb_timer_of: Mark a few more functions as __init
clocksource: Put nodes passed to CLOCKSOURCE_OF_DECLARE callbacks centrally
arm: zynq: Enable arm_global_timer
...
Pull scheduler changes from Ingo Molnar:
"The main changes in this cycle are:
- (much) improved CONFIG_NUMA_BALANCING support from Mel Gorman, Rik
van Riel, Peter Zijlstra et al. Yay!
- optimize preemption counter handling: merge the NEED_RESCHED flag
into the preempt_count variable, by Peter Zijlstra.
- wait.h fixes and code reorganization from Peter Zijlstra
- cfs_bandwidth fixes from Ben Segall
- SMP load-balancer cleanups from Peter Zijstra
- idle balancer improvements from Jason Low
- other fixes and cleanups"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
ftrace, sched: Add TRACE_FLAG_PREEMPT_RESCHED
stop_machine: Fix race between stop_two_cpus() and stop_cpus()
sched: Remove unnecessary iteration over sched domains to update nr_busy_cpus
sched: Fix asymmetric scheduling for POWER7
sched: Move completion code from core.c to completion.c
sched: Move wait code from core.c to wait.c
sched: Move wait.c into kernel/sched/
sched/wait: Fix __wait_event_interruptible_lock_irq_timeout()
sched: Avoid throttle_cfs_rq() racing with period_timer stopping
sched: Guarantee new group-entities always have weight
sched: Fix hrtimer_cancel()/rq->lock deadlock
sched: Fix cfs_bandwidth misuse of hrtimer_expires_remaining
sched: Fix race on toggling cfs_bandwidth_used
sched: Remove extra put_online_cpus() inside sched_setaffinity()
sched/rt: Fix task_tick_rt() comment
sched/wait: Fix build breakage
sched/wait: Introduce prepare_to_wait_event()
sched/wait: Add ___wait_cond_timeout() to wait_event*_timeout() too
sched: Remove get_online_cpus() usage
sched: Fix race in migrate_swap_stop()
...
Pull perf updates from Ingo Molnar:
"As a first remark I'd like to note that the way to build perf tooling
has been simplified and sped up, in the future it should be enough for
you to build perf via:
cd tools/perf/
make install
(ie without the -j option.) The build system will figure out the
number of CPUs and will do a parallel build+install.
The various build system inefficiencies and breakages Linus reported
against the v3.12 pull request should now be resolved - please
(re-)report any remaining annoyances or bugs.
Main changes on the perf kernel side:
* Performance optimizations:
. perf ring-buffer code optimizations, by Peter Zijlstra
. perf ring-buffer code optimizations, by Oleg Nesterov
. x86 NMI call-stack processing optimizations, by Peter Zijlstra
. perf context-switch optimizations, by Peter Zijlstra
. perf sampling speedups, by Peter Zijlstra
. x86 Intel PEBS processing speedups, by Peter Zijlstra
* Enhanced hardware support:
. for Intel Ivy Bridge-EP uncore PMUs, by Zheng Yan
. for Haswell transactions, by Andi Kleen, Peter Zijlstra
* Core perf events code enhancements and fixes by Oleg Nesterov:
. for uprobes, if fork() is called with pending ret-probes
. for uprobes platform support code
* New ABI details by Andi Kleen:
. Report x86 Haswell TSX transaction abort cost as weight
Main changes on the perf tooling side (some of these tooling changes
utilize the above kernel side changes):
* 'perf report/top' enhancements:
. Convert callchain children list to rbtree, greatly reducing the
time taken for callchain processing, from Namhyung Kim.
. Add new COMM infrastructure, further improving histogram
processing, from Frédéric Weisbecker, one fix from Namhyung Kim.
. Add /proc/kcore based live-annotation improvements, including
build-id cache support, multi map 'call' instruction navigation
fixes, kcore address validation, objdump workarounds. From
Adrian Hunter.
. Show progress on histogram collapsing, that can take a long
time, from Namhyung Kim.
. Add --max-stack option to limit callchain stack scan in 'top'
and 'report', improving callchain processing when reducing the
stack depth is an option, from Waiman Long.
. Add new option --ignore-vmlinux for perf top, from Willy
Tarreau.
* 'perf trace' enhancements:
. 'perf trace' now can can use a 'perf probe' dynamic tracepoints
to hook into the userspace -> kernel pathname copy so that it
can map fds to pathnames without reading /proc/pid/fd/ symlinks.
From Arnaldo Carvalho de Melo.
. Show VFS path associated with fd in live sessions, using a
'vfs_getname' 'perf probe' created dynamic tracepoint or by
looking at /proc/pid/fd, from Arnaldo Carvalho de Melo.
. Add 'trace' beautifiers for lots of syscall arguments, from
Arnaldo Carvalho de Melo.
. Implement more compact 'trace' output by suppressing zeroed
args, from Arnaldo Carvalho de Melo.
. Show thread COMM by default in 'trace', from Arnaldo Carvalho de
Melo.
. Add option to show full timestamp in 'trace', from David Ahern.
. Add 'record' command in 'trace', to record raw_syscalls:*, from
David Ahern.
. Add summary option to dump syscall statistics in 'trace', from
David Ahern.
. Improve error messages in 'trace', providing hints about system
configuration steps needed for using it, from Ramkumar
Ramachandra.
. 'perf trace' now emits hints as to why tracing is not possible,
helping the user to setup the system to allow tracing in the
desired permission granularity, telling if the problem is due to
debugfs not being mounted or with not enough permission for
!root, /proc/sys/kernel/perf_event_paranoit value, etc. From
Arnaldo Carvalho de Melo.
* 'perf record' enhancements:
. Check maximum frequency rate for record/top, emitting better
error messages, from Jiri Olsa.
. 'perf record' code cleanups, from David Ahern.
. Improve write_output error message in 'perf record', from Adrian
Hunter.
. Allow specifying B/K/M/G unit to the --mmap-pages arguments,
from Jiri Olsa.
. Fix command line callchain attribute tests to handle the new
-g/--call-chain semantics, from Arnaldo Carvalho de Melo.
* 'perf kvm' enhancements:
. Disable live kvm command if timerfd is not supported, from David
Ahern.
. Fix detection of non-core features, from David Ahern.
* 'perf list' enhancements:
. Add usage to 'perf list', from David Ahern.
. Show error in 'perf list' if tracepoints not available, from
Pekka Enberg.
* 'perf probe' enhancements:
. Support "$vars" meta argument syntax for local variables,
allowing asking for all possible variables at a given probe
point to be collected when it hits, from Masami Hiramatsu.
* 'perf sched' enhancements:
. Address the root cause of that 'perf sched' stack initialization
build slowdown, by programmatically setting a big array after
moving the global variable back to the stack. Fix from Adrian
Hunter.
* 'perf script' enhancements:
. Set up output options for in-stream attributes, from Adrian
Hunter.
. Print addr by default for BTS in 'perf script', from Adrian
Juntmer
* 'perf stat' enhancements:
. Improved messages when doing profiling in all or a subset of
CPUs using a workload as the session delimitator, as in:
'perf stat --cpu 0,2 sleep 10s'
from Arnaldo Carvalho de Melo.
. Add units to nanosec-based counters in 'perf stat', from David
Ahern.
. Remove bogus info when using 'perf stat' -e cycles/instructions,
from Ramkumar Ramachandra.
* 'perf lock' enhancements:
. 'perf lock' fixes and cleanups, from Davidlohr Bueso.
* 'perf test' enhancements:
. Fixup PERF_SAMPLE_TRANSACTION handling in sample synthesizing
and 'perf test', from Adrian Hunter.
. Clarify the "sample parsing" test entry, from Arnaldo Carvalho
de Melo.
. Consider PERF_SAMPLE_TRANSACTION in the "sample parsing" test,
from Arnaldo Carvalho de Melo.
. Memory leak fixes in 'perf test', from Felipe Pena.
* 'perf bench' enhancements:
. Change the procps visible command-name of invididual benchmark
tests plus cleanups, from Ingo Molnar.
* Generic perf tooling infrastructure/plumbing changes:
. Separating data file properties from session, code
reorganization from Jiri Olsa.
. Fix version when building out of tree, as when using one of
these:
$ make help | grep perf
perf-tar-src-pkg - Build perf-3.12.0.tar source tarball
perf-targz-src-pkg - Build perf-3.12.0.tar.gz source tarball
perf-tarbz2-src-pkg - Build perf-3.12.0.tar.bz2 source tarball
perf-tarxz-src-pkg - Build perf-3.12.0.tar.xz source tarball
$
from David Ahern.
. Enhance option parse error message, showing just the help lines
of the options affected, from Namhyung Kim.
. libtraceevent updates from upstream trace-cmd repo, from Steven
Rostedt.
. Always use perf_evsel__set_sample_bit to set sample_type, from
Adrian Hunter.
. Memory and mmap leak fixes from Chenggang Qin.
. Assorted build fixes for from David Ahern and Jiri Olsa.
. Speed up and prettify the build system, from Ingo Molnar.
. Implement addr2line directly using libbfd, from Roberto Vitillo.
. Separate the GTK support in a separate libperf-gtk.so DSO, that
is only loaded when --gtk is specified, from Namhyung Kim.
. perf bash completion fixes and improvements from Ramkumar
Ramachandra.
. Support for Openembedded/Yocto -dbg packages, from Ricardo
Ribalda Delgado.
And lots and lots of other fixes and code reorganizations that did not
make it into the list, see the shortlog, diffstat and the Git log for
details!"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (300 commits)
uprobes: Fix the memory out of bound overwrite in copy_insn()
uprobes: Fix the wrong usage of current->utask in uprobe_copy_process()
perf tools: Remove unneeded include
perf record: Remove post_processing_offset variable
perf record: Remove advance_output function
perf record: Refactor feature handling into a separate function
perf trace: Don't relookup fields by name in each sample
perf tools: Fix version when building out of tree
perf evsel: Ditch evsel->handler.data field
uprobes: Export write_opcode() as uprobe_write_opcode()
uprobes: Introduce arch_uprobe->ixol
uprobes: Kill module_init() and module_exit()
uprobes: Move function declarations out of arch
perf/x86/intel: Add Ivy Bridge-EP uncore IRP box support
perf/x86/intel/uncore: Add filter support for IvyBridge-EP QPI boxes
perf: Factor out strncpy() in perf_event_mmap_event()
tools/perf: Add required memory barriers
perf: Fix arch_perf_out_copy_user default
perf: Update a stale comment
perf: Optimize perf_output_begin() -- address calculation
...
Pull leftover IRQ fixes from Ingo Molnar:
"Two (minor) fixlets that missed v3.12"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Set the irq thread policy without checking CAP_SYS_NICE
irq: DocBook/genericirq.tmpl: Correct various typos
Pull IRQ changes from Ingo Molnar:
"The biggest change this cycle are the softirq/hardirq stack
interaction and nesting fixes, cleanups and reorganizations from
Frederic. This is the longer followup story to the softirq nesting
fix that is already upstream (commit ded797547548: "irq: Force hardirq
exit's softirq processing on its own stack")"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: bcm2835: Convert to use IRQCHIP_DECLARE macro
powerpc: Tell about irq stack coverage
x86: Tell about irq stack coverage
irq: Optimize softirq stack selection in irq exit
irq: Justify the various softirq stack choices
irq: Improve a bit softirq debugging
irq: Optimize call to softirq on hardirq exit
irq: Consolidate do_softirq() arch overriden implementations
x86/irq: Correct comment about i8259 initialization
Pull RCU updates from Ingo Molnar:
"The main RCU changes in this cycle are:
- Idle entry/exit changes, to throttle callback execution and other
refinements to speed up kbuild, primarily to address performance
issues located by Tibor Billes.
- Grace-period related changes, primarily to aid in debugging,
inspired by an -rt debugging session.
- Code reorganization moving RCU's source files into its own
kernel/rcu/ directory.
- RCU documentation updates
- Miscellaneous fixes.
Note, the following commit:
5c889690aa mm: Place preemption point in do_mlockall() loop
is identical to the commit already in your tree via email:
22356f447c mm: Place preemption point in do_mlockall() loop
[ Your version of the changelog nicely demonstrates it how kernel oops
messages should be trimmed properly :-/ ]"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
rcu: Move RCU-related source code to kernel/rcu directory
rcu: Fix occurrence of "the the" in checklist.txt
kthread: Add pointer to vmstat-avoidance patch
rcu: Update stall-warning documentation
rcu: Consistent rcu_is_watching() naming
rcu: Change EXPORT_SYMBOL() to EXPORT_SYMBOL_GPL()
rcu: Is it safe to enter an RCU read-side critical section?
rcu: Throttle invoke_rcu_core() invocations due to non-lazy callbacks
rcu: Throttle rcu_try_advance_all_cbs() execution
rcu: Remove redundant code from rcu_cleanup_after_idle()
rcu: Fix CONFIG_RCU_NOCB_CPU_ALL panic on machines with sparse CPU mask
rcu: Avoid sparse warnings in rcu_nocb_wake trace event
rcu: Track rcu_nocb_kthread()'s sleeping and awakening
rcu: Distinguish between NOCB and non-NOCB rcu_callback trace events
rcu: Add tracing for rcuo no-CBs CPU wakeup handshake
rcu: Add tracing of normal (non-NOCB) grace-period requests
rcu: Add tracing to rcu_gp_kthread()
rcu: Flag lockless access to ->gp_flags with ACCESS_ONCE()
rcu: Prevent spurious-wakeup DoS attack on rcu_gp_kthread()
rcu: Improve grace-period start logic
...
sparse complains about the enter/exit_sysycall_files[] variables being
dereferenced with rcu_dereference_sched(). The fields need to be
annotated with __rcu.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since the introduction of PREEMPT_NEED_RESCHED in:
f27dde8dee ("sched: Add NEED_RESCHED to the preempt_count")
we need to be able to look at both TIF_NEED_RESCHED and
PREEMPT_NEED_RESCHED to understand the full preemption behaviour.
Add it to the trace output.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Link: http://lkml.kernel.org/r/20131004152826.GP3081@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is a race between stop_two_cpus, and the global stop_cpus.
It is possible for two CPUs to get their stopper functions queued
"backwards" from one another, resulting in the stopper threads
getting stuck, and the system hanging. This can happen because
queuing up stoppers is not synchronized.
This patch adds synchronization between stop_cpus (a rare operation),
and stop_two_cpus.
Reported-and-Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: http://lkml.kernel.org/r/20131101104146.03d1e043@annuminas.surriel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
1. copy_insn() doesn't look very nice, all calculations are
confusing and it is not immediately clear why do we read
the 2nd page first.
2. The usage of inode->i_size is wrong on 32-bit machines.
3. "Instruction at end of binary" logic is simply wrong, it
doesn't handle the case when uprobe->offset > inode->i_size.
In this case "bytes" overflows, and __copy_insn() writes to
the memory outside of uprobe->arch.insn.
Yes, uprobe_register() checks i_size_read(), but this file
can be truncated after that. All i_size checks are racy, we
do this only to catch the obvious mistakes.
Change copy_insn() to call __copy_insn() in a loop, simplify
and fix the bytes/nbytes calculations.
Note: we do not care if we read extra bytes after inode->i_size
if we got the valid page. This is fine because the task gets the
same page after page-fault, and arch_uprobe_analyze_insn() can't
know how many bytes were actually read anyway.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Commit aa59c53fd4 "uprobes: Change uprobe_copy_process() to dup
xol_area" has a stupid typo, we need to setup t->utask->vaddr but
the code wrongly uses current->utask.
Even with this bug dup_xol_work() works "in practice", but only
because get_unmapped_area(NULL, TASK_SIZE - PAGE_SIZE) likely
returns the same address every time.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
John Stultz
Tom Zanussi
Steven Rostedt (Red Hat)
Masami Ichikawa
Kirill A. Shutemov
Linus Torvalds
Tejun Heo
Rik van Riel
Mel Gorman
Vivek Goyal
Chuansheng Liu
Ingo Molnar
Wanpeng Li
Peter Zijlstra
Kirill Tkhai
Alexander Shishkin
Li Zefan
Miao Xie
Paul E. McKenney
Vladimir Davydov
Xiao Guangrong
David Howells
Teodora Baluta
Chen Gang
Lai Jiangshan
Wei Yongjun
Hendrik Brueckner
Rusty Russell
Fengguang Wu
Frederic Weisbecker
Khalid Aziz
Mathias Krause
Felipe Contreras
Leonardo Potenza
Thomas Gleixner
Helge Deller
Dario Faggioli
Kamalesh Babulal
Vincent Guittot
Oleg Nesterov
Sasha Levin
Stephane Eranian
Eric W. Biederman
Shigeru Yoshida
Jason Baron
Bjorn Helgaas
Laxman Dewangan
Kent Overstreet
Eric Paris
Li Bin
Martin Schwidefsky
Johannes Berg
Srikar Dronamraju
Vince Weaver
Andrew Morton
Joe Perches
Rafael J. Wysocki
Al Viro
Christoph Hellwig
Michal Nazarewicz
Michael wang
Andy Shevchenko
Frantisek Hrbata
Kees Cook
Joe Mario
Dirk Gouders
Dave Young
Geert Uytterhoeven
Toshi Kani
Tetsuo Handa