Граф коммитов

732 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds c798360cd1 Merge branch 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu updates from Tejun Heo:
 "A lot of activities on percpu front.  Notable changes are...

   - percpu allocator now can take @gfp.  If @gfp doesn't contain
     GFP_KERNEL, it tries to allocate from what's already available to
     the allocator and a work item tries to keep the reserve around
     certain level so that these atomic allocations usually succeed.

     This will replace the ad-hoc percpu memory pool used by
     blk-throttle and also be used by the planned blkcg support for
     writeback IOs.

     Please note that I noticed a bug in how @gfp is interpreted while
     preparing this pull request and applied the fix 6ae833c7fe
     ("percpu: fix how @gfp is interpreted by the percpu allocator")
     just now.

   - percpu_ref now uses longs for percpu and global counters instead of
     ints.  It leads to more sparse packing of the percpu counters on
     64bit machines but the overhead should be negligible and this
     allows using percpu_ref for refcnting pages and in-memory objects
     directly.

   - The switching between percpu and single counter modes of a
     percpu_ref is made independent of putting the base ref and a
     percpu_ref can now optionally be initialized in single or killed
     mode.  This allows avoiding percpu shutdown latency for cases where
     the refcounted objects may be synchronously created and destroyed
     in rapid succession with only a fraction of them reaching fully
     operational status (SCSI probing does this when combined with
     blk-mq support).  It's also planned to be used to implement forced
     single mode to detect underflow more timely for debugging.

  There's a separate branch percpu/for-3.18-consistent-ops which cleans
  up the duplicate percpu accessors.  That branch causes a number of
  conflicts with s390 and other trees.  I'll send a separate pull
  request w/ resolutions once other branches are merged"

* 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (33 commits)
  percpu: fix how @gfp is interpreted by the percpu allocator
  blk-mq, percpu_ref: start q->mq_usage_counter in atomic mode
  percpu_ref: make INIT_ATOMIC and switch_to_atomic() sticky
  percpu_ref: add PERCPU_REF_INIT_* flags
  percpu_ref: decouple switching to percpu mode and reinit
  percpu_ref: decouple switching to atomic mode and killing
  percpu_ref: add PCPU_REF_DEAD
  percpu_ref: rename things to prepare for decoupling percpu/atomic mode switch
  percpu_ref: replace pcpu_ prefix with percpu_
  percpu_ref: minor code and comment updates
  percpu_ref: relocate percpu_ref_reinit()
  Revert "blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe"
  Revert "percpu: free percpu allocation info for uniprocessor system"
  percpu-refcount: make percpu_ref based on longs instead of ints
  percpu-refcount: improve WARN messages
  percpu: fix locking regression in the failure path of pcpu_alloc()
  percpu-refcount: add @gfp to percpu_ref_init()
  proportions: add @gfp to init functions
  percpu_counter: add @gfp to percpu_counter_init()
  percpu_counter: make percpu_counters_lock irq-safe
  ...
2014-10-10 07:26:02 -04:00
Linus Torvalds b211e9d7c8 Merge branch 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
 "Nothing too interesting.  Just a handful of cleanup patches"

* 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  Revert "cgroup: remove redundant variable in cgroup_mount()"
  cgroup: remove redundant variable in cgroup_mount()
  cgroup: fix missing unlock in cgroup_release_agent()
  cgroup: remove CGRP_RELEASABLE flag
  perf/cgroup: Remove perf_put_cgroup()
  cgroup: remove redundant check in cgroup_ino()
  cpuset: simplify proc_cpuset_show()
  cgroup: simplify proc_cgroup_show()
  cgroup: use a per-cgroup work for release agent
  cgroup: remove bogus comments
  cgroup: remove redundant code in cgroup_rmdir()
  cgroup: remove some useless forward declarations
  cgroup: fix a typo in comment.
2014-10-10 07:24:40 -04:00
Zefan Li e756c7b698 Revert "cgroup: remove redundant variable in cgroup_mount()"
This reverts commit 0c7bf3e8ca.

If there are child cgroups in the cgroupfs and then we umount it,
the superblock will be destroyed but the cgroup_root will be kept
around. When we mount it again, cgroup_mount() will find this
cgroup_root and allocate a new sb for it.

So with this commit we will be trapped in a dead loop in the case
described above, because kernfs_pin_sb() keeps returning NULL.

Currently I don't see how we can avoid using both pinned_sb and
new_sb, so just revert it.

Cc: Al Viro <viro@ZenIV.linux.org.uk>
Reported-by: Andrey Wagin <avagin@gmail.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-09-26 00:16:23 -04:00
Tejun Heo 2aad2a86f6 percpu_ref: add PERCPU_REF_INIT_* flags
With the recent addition of percpu_ref_reinit(), percpu_ref now can be
used as a persistent switch which can be turned on and off repeatedly
where turning off maps to killing the ref and waiting for it to drain;
however, there currently isn't a way to initialize a percpu_ref in its
off (killed and drained) state, which can be inconvenient for certain
persistent switch use cases.

Similarly, percpu_ref_switch_to_atomic/percpu() allow dynamic
selection of operation mode; however, currently a newly initialized
percpu_ref is always in percpu mode making it impossible to avoid the
latency overhead of switching to atomic mode.

This patch adds @flags to percpu_ref_init() and implements the
following flags.

* PERCPU_REF_INIT_ATOMIC	: start ref in atomic mode
* PERCPU_REF_INIT_DEAD		: start ref killed and drained

These flags should be able to serve the above two use cases.

v2: target_core_tpg.c conversion was missing.  Fixed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-09-24 13:31:50 -04:00
Tejun Heo d06efebf0c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block into for-3.18
This is to receive 0a30288da1 ("blk-mq, percpu_ref: implement a
kludge for SCSI blk-mq stall during probe") which implements
__percpu_ref_kill_expedited() to work around SCSI blk-mq stall.  The
commit reverted and patches to implement proper fix will be added.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
2014-09-24 13:00:21 -04:00
Zefan Li 0c7bf3e8ca cgroup: remove redundant variable in cgroup_mount()
Both pinned_sb and new_sb indicate if a new superblock is needed,
so we can just remove new_sb.

Note now we must check if kernfs_tryget_sb() returns NULL, because
when it returns NULL, kernfs_mount() may still re-use an existing
superblock, which is just allocated by another concurent mount.

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-09-20 13:09:35 -04:00
Zefan Li 3e2cd91ab9 cgroup: fix missing unlock in cgroup_release_agent()
The patch 971ff4935538: "cgroup: use a per-cgroup work for release
agent" from Sep 18, 2014, leads to the following static checker
warning:

	kernel/cgroup.c:5310 cgroup_release_agent()
	warn: 'mutex:&cgroup_mutex' is sometimes locked here and sometimes unlocked.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-09-20 12:23:35 -04:00
Zefan Li a25eb52e81 cgroup: remove CGRP_RELEASABLE flag
We call put_css_set() after setting CGRP_RELEASABLE flag in
cgroup_task_migrate(), but in other places we call it without setting
the flag. I don't see the necessity of this flag.

Moreover once the flag is set, it will never be cleared, unless writing
to the notify_on_release control file, so it can be quite confusing
if we look at the output of debug.releasable.

  # mount -t cgroup -o debug xxx /cgroup
  # mkdir /cgroup/child
  # cat /cgroup/child/debug.releasable
  0   <-- shows 0 though the cgroup is empty
  # echo $$ > /cgroup/child/tasks
  # cat /cgroup/child/debug.releasable
  0
  # echo $$ > /cgroup/tasks && echo $$ > /cgroup/child/tasks
  # cat /proc/child/debug.releasable
  1   <-- shows 1 though the cgroup is not empty

This patch removes the flag, and now debug.releasable shows if the
cgroup is empty or not.

Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-09-19 09:29:32 -04:00
Zefan Li 006f4ac497 cgroup: simplify proc_cgroup_show()
Use the ONE macro instead of REG, and we can simplify proc_cgroup_show().

Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-09-18 13:27:23 -04:00
Zefan Li 971ff49355 cgroup: use a per-cgroup work for release agent
Instead of using a global work to schedule release agent on removable
cgroups, we change to use a per-cgroup work to do this, which makes
the code much simpler.

v2: use a dedicated work instead of reusing css->destroy_work. (Tejun)

Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-09-18 13:14:22 -04:00
Zefan Li eb4aec84d6 cgroup: fix unbalanced locking
cgroup_pidlist_start() holds cgrp->pidlist_mutex and then calls
pidlist_array_load(), and cgroup_pidlist_stop() releases the mutex.

It is wrong that we release the mutex in the failure path in
pidlist_array_load(), because cgroup_pidlist_stop() will be called
no matter if cgroup_pidlist_start() returns errno or not.

Fixes: 4bac00d16a
Cc: <stable@vger.kernel.org> # 3.14+
Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
2014-09-18 12:32:52 -04:00
Li Zefan 0c8fc2c121 cgroup: remove bogus comments
We never grab cgroup mutex in fork and exit paths no matter whether
notify_on_release is set or not.

Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-09-18 06:34:16 +09:00
Li Zefan 244bb9a633 cgroup: remove redundant code in cgroup_rmdir()
We no longer clear kn->priv in cgroup_rmdir(), so we don't need
to get an extra refcnt.

Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-09-18 06:34:15 +09:00
Li Zefan 6213daab25 cgroup: remove some useless forward declarations
Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-09-18 06:34:15 +09:00
Tejun Heo 9253b279f4 Merge branch 'for-3.17-fixes' of ra.kernel.org:/pub/scm/linux/kernel/git/tj/cgroup into for-3.18
Pull to receive a4189487da ("cgroup: delay the clearing of
cgrp->kn->priv") for the scheduled clean up patches.

Signed-off-by: Tejun Heo <tj@kernel.org>
2014-09-18 06:29:05 +09:00
Tejun Heo a34375ef9e percpu-refcount: add @gfp to percpu_ref_init()
Percpu allocator now supports allocation mask.  Add @gfp to
percpu_ref_init() so that !GFP_KERNEL allocation masks can be used
with percpu_refs too.

This patch doesn't make any functional difference.

v2: blk-mq conversion was missing.  Updated.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Cc: Jens Axboe <axboe@kernel.dk>
2014-09-08 09:51:30 +09:00
Li Zefan aa32362f01 cgroup: check cgroup liveliness before unbreaking kernfs
When cgroup_kn_lock_live() is called through some kernfs operation and
another thread is calling cgroup_rmdir(), we'll trigger the warning in
cgroup_get().

------------[ cut here ]------------
WARNING: CPU: 1 PID: 1228 at kernel/cgroup.c:1034 cgroup_get+0x89/0xa0()
...
Call Trace:
 [<c16ee73d>] dump_stack+0x41/0x52
 [<c10468ef>] warn_slowpath_common+0x7f/0xa0
 [<c104692d>] warn_slowpath_null+0x1d/0x20
 [<c10bb999>] cgroup_get+0x89/0xa0
 [<c10bbe58>] cgroup_kn_lock_live+0x28/0x70
 [<c10be3c1>] __cgroup_procs_write.isra.26+0x51/0x230
 [<c10be5b2>] cgroup_tasks_write+0x12/0x20
 [<c10bb7b0>] cgroup_file_write+0x40/0x130
 [<c11aee71>] kernfs_fop_write+0xd1/0x160
 [<c1148e58>] vfs_write+0x98/0x1e0
 [<c114934d>] SyS_write+0x4d/0xa0
 [<c16f656b>] sysenter_do_call+0x12/0x12
---[ end trace 6f2e0c38c2108a74 ]---

Fix this by calling css_tryget() instead of cgroup_get().

v2:
- move cgroup_tryget() right below cgroup_get() definition. (Tejun)

Cc: <stable@vger.kernel.org> # 3.15+
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-09-05 01:36:19 +09:00
Li Zefan a4189487da cgroup: delay the clearing of cgrp->kn->priv
Run these two scripts concurrently:

    for ((; ;))
    {
        mkdir /cgroup/sub
        rmdir /cgroup/sub
    }

    for ((; ;))
    {
        echo $$ > /cgroup/sub/cgroup.procs
        echo $$ > /cgroup/cgroup.procs
    }

A kernel bug will be triggered:

BUG: unable to handle kernel NULL pointer dereference at 00000038
IP: [<c10bbd69>] cgroup_put+0x9/0x80
...
Call Trace:
 [<c10bbe19>] cgroup_kn_unlock+0x39/0x50
 [<c10bbe91>] cgroup_kn_lock_live+0x61/0x70
 [<c10be3c1>] __cgroup_procs_write.isra.26+0x51/0x230
 [<c10be5b2>] cgroup_tasks_write+0x12/0x20
 [<c10bb7b0>] cgroup_file_write+0x40/0x130
 [<c11aee71>] kernfs_fop_write+0xd1/0x160
 [<c1148e58>] vfs_write+0x98/0x1e0
 [<c114934d>] SyS_write+0x4d/0xa0
 [<c16f656b>] sysenter_do_call+0x12/0x12

We clear cgrp->kn->priv in the end of cgroup_rmdir(), but another
concurrent thread can access kn->priv after the clearing.

We should move the clearing to css_release_work_fn(). At that time
no one is holding reference to the cgroup and no one can gain a new
reference to access it.

v2:
- move RCU_INIT_POINTER() into the else block. (Tejun)
- remove the cgroup_parent() check. (Tejun)
- update the comment in css_tryget_online_from_dir().

Cc: <stable@vger.kernel.org> # 3.15+
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-09-05 01:36:18 +09:00
Dongsheng Yang 251f8c0364 cgroup: fix a typo in comment.
There is no function named cgroup_enable_task_cg_links().
Instead, the correct function name in this comment should
be cgroup_enabled_task_cg_lists().

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-25 10:49:29 -04:00
Vivek Goyal fa8137be6b cgroup: Display legacy cgroup files on default hierarchy
Kernel command line parameter cgroup__DEVEL__legacy_files_on_dfl forces
legacy cgroup files to show up on default hierarhcy if susbsystem does
not have any files defined for default hierarchy.

But this seems to be working only if legacy files are defined in
ss->legacy_cftypes. If one adds some cftypes later using
cgroup_add_legacy_cftypes(), these files don't show up on default
hierarchy.  Update the function accordingly so that the dynamically
added legacy files also show up in the default hierarchy if the target
subsystem is also using the base legacy files for the default
hierarchy.

tj: Patch description and comment updates.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-22 13:20:40 -04:00
Alban Crequy 71b1fb5c44 cgroup: reject cgroup names with '\n'
/proc/<pid>/cgroup contains one cgroup path on each line. If cgroup names are
allowed to contain "\n", applications cannot parse /proc/<pid>/cgroup safely.

Signed-off-by: Alban Crequy <alban.crequy@collabora.co.uk>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2014-08-18 10:18:57 -04:00
Linus Torvalds 47dfe4037e Merge branch 'for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup changes from Tejun Heo:
 "Mostly changes to get the v2 interface ready.  The core features are
  mostly ready now and I think it's reasonable to expect to drop the
  devel mask in one or two devel cycles at least for a subset of
  controllers.

   - cgroup added a controller dependency mechanism so that block cgroup
     can depend on memory cgroup.  This will be used to finally support
     IO provisioning on the writeback traffic, which is currently being
     implemented.

   - The v2 interface now uses a separate table so that the interface
     files for the new interface are explicitly declared in one place.
     Each controller will explicitly review and add the files for the
     new interface.

   - cpuset is getting ready for the hierarchical behavior which is in
     the similar style with other controllers so that an ancestor's
     configuration change doesn't change the descendants' configurations
     irreversibly and processes aren't silently migrated when a CPU or
     node goes down.

  All the changes are to the new interface and no behavior changed for
  the multiple hierarchies"

* 'for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (29 commits)
  cpuset: fix the WARN_ON() in update_nodemasks_hier()
  cgroup: initialize cgrp_dfl_root_inhibit_ss_mask from !->dfl_files test
  cgroup: make CFTYPE_ONLY_ON_DFL and CFTYPE_NO_ internal to cgroup core
  cgroup: distinguish the default and legacy hierarchies when handling cftypes
  cgroup: replace cgroup_add_cftypes() with cgroup_add_legacy_cftypes()
  cgroup: rename cgroup_subsys->base_cftypes to ->legacy_cftypes
  cgroup: split cgroup_base_files[] into cgroup_{dfl|legacy}_base_files[]
  cpuset: export effective masks to userspace
  cpuset: allow writing offlined masks to cpuset.cpus/mems
  cpuset: enable onlined cpu/node in effective masks
  cpuset: refactor cpuset_hotplug_update_tasks()
  cpuset: make cs->{cpus, mems}_allowed as user-configured masks
  cpuset: apply cs->effective_{cpus,mems}
  cpuset: initialize top_cpuset's configured masks at mount
  cpuset: use effective cpumask to build sched domains
  cpuset: inherit ancestor's masks if effective_{cpus, mems} becomes empty
  cpuset: update cs->effective_{cpus, mems} when config changes
  cpuset: update cpuset->effective_{cpus,mems} at hotplug
  cpuset: add cs->effective_cpus and cs->effective_mems
  cgroup: clean up sane_behavior handling
  ...
2014-08-04 10:11:28 -07:00
Linus Torvalds f2a84170ed Merge branch 'for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu updates from Tejun Heo:

 - Major reorganization of percpu header files which I think makes
   things a lot more readable and logical than before.

 - percpu-refcount is updated so that it requires explicit destruction
   and can be reinitialized if necessary.  This was pulled into the
   block tree to replace the custom percpu refcnting implemented in
   blk-mq.

 - In the process, percpu and percpu-refcount got cleaned up a bit

* 'for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (21 commits)
  percpu-refcount: implement percpu_ref_reinit() and percpu_ref_is_zero()
  percpu-refcount: require percpu_ref to be exited explicitly
  percpu-refcount: use unsigned long for pcpu_count pointer
  percpu-refcount: add helpers for ->percpu_count accesses
  percpu-refcount: one bit is enough for REF_STATUS
  percpu-refcount, aio: use percpu_ref_cancel_init() in ioctx_alloc()
  workqueue: stronger test in process_one_work()
  workqueue: clear POOL_DISASSOCIATED in rebind_workers()
  percpu: Use ALIGN macro instead of hand coding alignment calculation
  percpu: invoke __verify_pcpu_ptr() from the generic part of accessors and operations
  percpu: preffity percpu header files
  percpu: use raw_cpu_*() to define __this_cpu_*()
  percpu: reorder macros in percpu header files
  percpu: move {raw|this}_cpu_*() definitions to include/linux/percpu-defs.h
  percpu: move generic {raw|this}_cpu_*_N() definitions to include/asm-generic/percpu.h
  percpu: only allow sized arch overrides for {raw|this}_cpu_*() ops
  percpu: reorganize include/linux/percpu-defs.h
  percpu: move accessors from include/linux/percpu.h to percpu-defs.h
  percpu: include/asm-generic/percpu.h should contain only arch-overridable parts
  percpu: introduce arch_raw_cpu_ptr()
  ...
2014-08-04 10:09:27 -07:00
Tejun Heo 5de4fa13c4 cgroup: initialize cgrp_dfl_root_inhibit_ss_mask from !->dfl_files test
cgrp_dfl_root_inhibit_ss_mask determines which subsystems are not
supported on the default hierarchy and is currently initialized
statically and just includes the debug subsystem.  Now that there's
cgroup_subsys->dfl_files, we can easily tell which subsystems support
the default hierarchy or not.

Let's initialize cgrp_dfl_root_inhibit_ss_mask by testing whether
cgroup_subsys->dfl_files is NULL.  After all, subsystems with NULL
->dfl_files aren't useable on the default hierarchy anyway.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
2014-07-15 11:05:10 -04:00
Tejun Heo 05ebb6e60f cgroup: make CFTYPE_ONLY_ON_DFL and CFTYPE_NO_ internal to cgroup core
cgroup now distinguishes cftypes for the default and legacy
hierarchies more explicitly by using separate arrays and
CFTYPE_ONLY_ON_DFL and CFTYPE_INSANE should be and are used only
inside cgroup core proper.  Let's make it clear that the flags are
internal by prefixing them with double underscores.

CFTYPE_INSANE is renamed to __CFTYPE_NOT_ON_DFL for consistency.  The
two flags are also collected and assigned bits >= 16 so that they
aren't mixed with the published flags.

v2: Convert the extra ones in cgroup_exit_cftypes() which are added by
    revision to the previous patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
2014-07-15 11:05:10 -04:00
Tejun Heo a8ddc8215e cgroup: distinguish the default and legacy hierarchies when handling cftypes
Until now, cftype arrays carried files for both the default and legacy
hierarchies and the files which needed to be used on only one of them
were flagged with either CFTYPE_ONLY_ON_DFL or CFTYPE_INSANE.  This
gets confusing very quickly and we may end up exposing interface files
to the default hierarchy without thinking it through.

This patch makes cgroup core provide separate sets of interfaces for
cftype handling so that the cftypes for the default and legacy
hierarchies are clearly distinguished.  The previous two patches
renamed the existing ones so that they clearly indicate that they're
for the legacy hierarchies.  This patch adds the interface for the
default hierarchy and apply them selectively depending on the
hierarchy type.

* cftypes added through cgroup_subsys->dfl_cftypes and
  cgroup_add_dfl_cftypes() only show up on the default hierarchy.

* cftypes added through cgroup_subsys->legacy_cftypes and
  cgroup_add_legacy_cftypes() only show up on the legacy hierarchies.

* cgroup_subsys->dfl_cftypes and ->legacy_cftypes can point to the
  same array for the cases where the interface files are identical on
  both types of hierarchies.

* This makes all the existing subsystem interface files legacy-only by
  default and all subsystems will have no interface file created when
  enabled on the default hierarchy.  Each subsystem should explicitly
  review and compose the interface for the default hierarchy.

* A boot param "cgroup__DEVEL__legacy_files_on_dfl" is added which
  makes subsystems which haven't decided the interface files for the
  default hierarchy to present the legacy files on the default
  hierarchy so that its behavior on the default hierarchy can be
  tested.  As the awkward name suggests, this is for development only.

* memcg's CFTYPE_INSANE on "use_hierarchy" is noop now as the whole
  array isn't used on the default hierarchy.  The flag is removed.

v2: Updated documentation for cgroup__DEVEL__legacy_files_on_dfl.

v3: Clear CFTYPE_ONLY_ON_DFL and CFTYPE_INSANE when cfts are removed
    as suggested by Li.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2014-07-15 11:05:10 -04:00
Tejun Heo 2cf669a58d cgroup: replace cgroup_add_cftypes() with cgroup_add_legacy_cftypes()
Currently, cftypes added by cgroup_add_cftypes() are used for both the
unified default hierarchy and legacy ones and subsystems can mark each
file with either CFTYPE_ONLY_ON_DFL or CFTYPE_INSANE if it has to
appear only on one of them.  This is quite hairy and error-prone.
Also, we may end up exposing interface files to the default hierarchy
without thinking it through.

cgroup_subsys will grow two separate cftype addition functions and
apply each only on the hierarchies of the matching type.  This will
allow organizing cftypes in a lot clearer way and encourage subsystems
to scrutinize the interface which is being exposed in the new default
hierarchy.

In preparation, this patch adds cgroup_add_legacy_cftypes() which
currently is a simple wrapper around cgroup_add_cftypes() and replaces
all cgroup_add_cftypes() usages with it.

While at it, this patch drops a completely spurious return from
__hugetlb_cgroup_file_init().

This patch doesn't introduce any functional differences.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2014-07-15 11:05:09 -04:00
Tejun Heo 5577964e64 cgroup: rename cgroup_subsys->base_cftypes to ->legacy_cftypes
Currently, cgroup_subsys->base_cftypes is used for both the unified
default hierarchy and legacy ones and subsystems can mark each file
with either CFTYPE_ONLY_ON_DFL or CFTYPE_INSANE if it has to appear
only on one of them.  This is quite hairy and error-prone.  Also, we
may end up exposing interface files to the default hierarchy without
thinking it through.

cgroup_subsys will grow two separate cftype arrays and apply each only
on the hierarchies of the matching type.  This will allow organizing
cftypes in a lot clearer way and encourage subsystems to scrutinize
the interface which is being exposed in the new default hierarchy.

In preparation, this patch renames cgroup_subsys->base_cftypes to
cgroup_subsys->legacy_cftypes.  This patch is pure rename.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2014-07-15 11:05:09 -04:00
Tejun Heo a14c6874be cgroup: split cgroup_base_files[] into cgroup_{dfl|legacy}_base_files[]
Currently cgroup_base_files[] contains the cgroup core interface files
for both legacy and default hierarchies with each file tagged with
CFTYPE_INSANE and CFTYPE_ONLY_ON_DFL.  This is difficult to read.

Let's separate it out to two separate tables, cgroup_dfl_base_files[]
and cgroup_legacy_base_files[], and use the appropriate one in
cgroup_mkdir() depending on the hierarchy type.  This makes tagging
each file unnecessary.

This patch doesn't introduce any behavior changes.

v2: cgroup_dfl_base_files[] was missing the termination entry
    triggering WARN in cgroup_init_cftypes() for 0day kernel testing
    robot.  Fixed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Jet Chen <jet.chen@intel.com>
2014-07-15 11:05:09 -04:00
Tejun Heo 7b9a6ba56e cgroup: clean up sane_behavior handling
After the previous patch to remove sane_behavior support from
non-default hierarchies, CGRP_ROOT_SANE_BEHAVIOR is used only to
indicate the default hierarchy while parsing mount options.  This
patch makes the following cleanups around it.

* Don't show it in the mount option.  Eventually the default hierarchy
  will be assigned a different filesystem type.

* As sane_behavior is no longer effective on non-default hierarchies
  and the default hierarchy doesn't accept any mount options,
  parse_cgroupfs_options() can consider sane_behavior mount option as
  indicating the default hierarchy and fail if any other options are
  specified with it.  While at it, remove one of the double blank
  lines in the function.

* cgroup_mount() can now simply test CGRP_ROOT_SANE_BEHAVIOR to tell
  whether to mount the default hierarchy or not.

* As CGROUP_ROOT_SANE_BEHAVIOR's only role now is indicating whether
  to select the default hierarchy or not during mount, it doesn't need
  to be set in the default hierarchy itself.  cgroup_init_early()
  updated accordingly.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
2014-07-09 10:08:08 -04:00
Tejun Heo aa6ec29bee cgroup: remove sane_behavior support on non-default hierarchies
sane_behavior has been used as a development vehicle for the default
unified hierarchy.  Now that the default hierarchy is in place, the
flag became redundant and confusing as its usage is allowed on all
hierarchies.  There are gonna be either the default hierarchy or
legacy ones.  Let's make that clear by removing sane_behavior support
on non-default hierarchies.

This patch replaces cgroup_sane_behavior() with cgroup_on_dfl().  The
comment on top of CGRP_ROOT_SANE_BEHAVIOR is moved to on top of
cgroup_on_dfl() with sane_behavior specific part dropped.

On the default and legacy hierarchies w/o sane_behavior, this
shouldn't cause any behavior differences.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
2014-07-09 10:08:08 -04:00
Tejun Heo c1d5d42efd cgroup: make interface file "cgroup.sane_behavior" legacy-only
"cgroup.sane_behavior" is added to help distinguishing whether
sane_behavior is in effect or not.  We now have the default hierarchy
where the flag is always in effect and are planning to remove
supporting sane behavior on the legacy hierarchies making this file on
the default hierarchy rather pointless.  Let's make it legacy only and
thus always zero.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
2014-07-09 10:08:08 -04:00
Tejun Heo 7450e90bbb cgroup: remove CGRP_ROOT_OPTION_MASK
cgroup_root->flags only contains CGRP_ROOT_* flags and there's no
reason to mask the flags.  Remove CGRP_ROOT_OPTION_MASK.

This doesn't cause any behavior differences.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
2014-07-09 10:08:07 -04:00
Tejun Heo af0ba6789c cgroup: implement cgroup_subsys->depends_on
Currently, the blkio subsystem attributes all of writeback IOs to the
root.  One of the issues is that there's no way to tell who originated
a writeback IO from block layer.  Those IOs are usually issued
asynchronously from a task which didn't have anything to do with
actually generating the dirty pages.  The memory subsystem, when
enabled, already keeps track of the ownership of each dirty page and
it's desirable for blkio to piggyback instead of adding its own
per-page tag.

blkio piggybacking on memory is an implementation detail which
preferably should be handled automatically without requiring explicit
userland action.  To achieve that, this patch implements
cgroup_subsys->depends_on which contains the mask of subsystems which
should be enabled together when the subsystem is enabled.

The previous patches already implemented the support for enabled but
invisible subsystems and cgroup_subsys->depends_on can be easily
implemented by updating cgroup_refresh_child_subsys_mask() so that it
calculates cgroup->child_subsys_mask considering
cgroup_subsys->depends_on of the explicitly enabled subsystems.

Documentation/cgroups/unified-hierarchy.txt is updated to explain that
subsystems may not become immediately available after being unused
from userland and that dependency could be a factor in it.  As
subsystems may already keep residual references, this doesn't
significantly change how subsystem rebinding can be used.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
2014-07-08 18:02:57 -04:00
Tejun Heo b4536f0cab cgroup: implement cgroup_subsys->css_reset()
cgroup is implementing support for subsystem dependency which would
require a way to enable a subsystem even when it's not directly
configured through "cgroup.subtree_control".

The previous patches added support for explicitly and implicitly
enabled subsystems and showing/hiding their interface files.  An
explicitly enabled subsystem may become implicitly enabled if it's
turned off through "cgroup.subtree_control" but there are subsystems
depending on it.  In such cases, the subsystem, as it's turned off
when seen from userland, shouldn't enforce any resource control.
Also, the subsystem may be explicitly turned on later again and its
interface files should be as close to the intial state as possible.

This patch adds cgroup_subsys->css_reset() which is invoked when a css
is hidden.  The callback should disable resource control and reset the
state to the vanilla state.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
2014-07-08 18:02:57 -04:00
Tejun Heo f63070d350 cgroup: make interface files visible iff enabled on cgroup->subtree_control
cgroup is implementing support for subsystem dependency which would
require a way to enable a subsystem even when it's not directly
configured through "cgroup.subtree_control".

The preceding patch distinguished cgroup->subtree_control and
->child_subsys_mask where the former is the subsystems explicitly
configured by the userland and the latter is all enabled subsystems
currently is equal to the former but will include subsystems
implicitly enabled through dependency.

Subsystems which are enabled due to dependency shouldn't be visible to
userland.  This patch updates cgroup_subtree_control_write() and
create_css() such that interface files are not created for implicitly
enabled subsytems.

* @visible paramter is added to create_css().  Interface files are
  created only when true.

* If an already implicitly enabled subsystem is turned on through
  "cgroup.subtree_control", the existing css should be used.  css
  draining is skipped.

* cgroup_subtree_control_write() computes the new target
  cgroup->child_subsys_mask and create/kill or show/hide csses
  accordingly.

As the two subsystem masks are still kept identical, this patch
doesn't introduce any behavior changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
2014-07-08 18:02:57 -04:00
Tejun Heo 667c249171 cgroup: introduce cgroup->subtree_control
cgroup is implementing support for subsystem dependency which would
require a way to enable a subsystem even when it's not directly
configured through "cgroup.subtree_control".

Previously, cgroup->child_subsys_mask directly reflected
"cgroup.subtree_control" and the enabled subsystems in the child
cgroups.  This patch adds cgroup->subtree_control which
"cgroup.subtree_control" operates on.  cgroup->child_subsys_mask is
now calculated from cgroup->subtree_control by
cgroup_refresh_child_subsys_mask(), which sets it identical to
cgroup->subtree_control for now.

This will allow using cgroup->child_subsys_mask for all the enabled
subsystems including the implicit ones and ->subtree_control for
tracking the explicitly requested ones.  This patch keeps the two
masks identical and doesn't introduce any behavior changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
2014-07-08 18:02:56 -04:00
Tejun Heo c29adf24e0 cgroup: reorganize cgroup_subtree_control_write()
Make the following two reorganizations to
cgroup_subtree_control_write().  These are to prepare for future
changes and shouldn't cause any functional difference.

* Move availability above css offlining wait.

* Move cgrp->child_subsys_mask update above new css creation.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
2014-07-08 18:02:56 -04:00
Li Zefan 3a32bd72d7 cgroup: fix a race between cgroup_mount() and cgroup_kill_sb()
We've converted cgroup to kernfs so cgroup won't be intertwined with
vfs objects and locking, but there are dark areas.

Run two instances of this script concurrently:

    for ((; ;))
    {
    	mount -t cgroup -o cpuacct xxx /cgroup
    	umount /cgroup
    }

After a while, I saw two mount processes were stuck at retrying, because
they were waiting for a subsystem to become free, but the root associated
with this subsystem never got freed.

This can happen, if thread A is in the process of killing superblock but
hasn't called percpu_ref_kill(), and at this time thread B is mounting
the same cgroup root and finds the root in the root list and performs
percpu_ref_try_get().

To fix this, we try to increase both the refcnt of the superblock and the
percpu refcnt of cgroup root.

v2:
- we should try to get both the superblock refcnt and cgroup_root refcnt,
  because cgroup_root may have no superblock assosiated with it.
- adjust/add comments.

tj: Updated comments.  Renamed @sb to @pinned_sb.

Cc: <stable@vger.kernel.org> # 3.15
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-06-30 10:16:26 -04:00
Li Zefan 970317aa48 cgroup: fix mount failure in a corner case
# cat test.sh
  #! /bin/bash

  mount -t cgroup -o cpu xxx /cgroup
  umount /cgroup

  mount -t cgroup -o cpu,cpuacct xxx /cgroup
  umount /cgroup
  # ./test.sh
  mount: xxx already mounted or /cgroup busy
  mount: according to mtab, xxx is already mounted on /cgroup

It's because the cgroupfs_root of the first mount was under destruction
asynchronously.

Fix this by delaying and then retrying mount for this case.

v3:
- put the refcnt immediately after getting it. (Tejun)

v2:
- use percpu_ref_tryget_live() rather that introducing
  percpu_ref_alive(). (Tejun)
- adjust comment.

tj: Updated the comment a bit.

Cc: <stable@vger.kernel.org> # 3.15
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-06-30 10:16:25 -04:00
Tejun Heo 9a1049da9b percpu-refcount: require percpu_ref to be exited explicitly
Currently, a percpu_ref undoes percpu_ref_init() automatically by
freeing the allocated percpu area when the percpu_ref is killed.
While seemingly convenient, this has the following niggles.

* It's impossible to re-init a released reference counter without
  going through re-allocation.

* In the similar vein, it's impossible to initialize a percpu_ref
  count with static percpu variables.

* We need and have an explicit destructor anyway for failure paths -
  percpu_ref_cancel_init().

This patch removes the automatic percpu counter freeing in
percpu_ref_kill_rcu() and repurposes percpu_ref_cancel_init() into a
generic destructor now named percpu_ref_exit().  percpu_ref_destroy()
is considered but it gets confusing with percpu_ref_kill() while
"exit" clearly indicates that it's the counterpart of
percpu_ref_init().

All percpu_ref_cancel_init() users are updated to invoke
percpu_ref_exit() instead and explicit percpu_ref_exit() calls are
added to the destruction path of all percpu_ref users.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Benjamin LaHaise <bcrl@kvack.org>
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Cc: Li Zefan <lizefan@huawei.com>
2014-06-28 08:10:14 -04:00
Li Zefan 99bae5f941 cgroup: fix broken css_has_online_children()
After running:

  # mount -t cgroup cpu xxx /cgroup && mkdir /cgroup/sub && \
    rmdir /cgroup/sub && umount /cgroup

I found the cgroup root still existed:

  # cat /proc/cgroups
  #subsys_name    hierarchy       num_cgroups     enabled
  cpuset  0       1       1
  cpu     1       1       1
  ...

It turned out css_has_online_children() is broken.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Sigend-off-by: Tejun Heo <tj@kernel.org>
2014-06-17 18:52:53 -04:00
Linus Torvalds 14208b0ec5 Merge branch 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
 "A lot of activities on cgroup side.  Heavy restructuring including
  locking simplification took place to improve the code base and enable
  implementation of the unified hierarchy, which currently exists behind
  a __DEVEL__ mount option.  The core support is mostly complete but
  individual controllers need further work.  To explain the design and
  rationales of the the unified hierarchy

        Documentation/cgroups/unified-hierarchy.txt

  is added.

  Another notable change is css (cgroup_subsys_state - what each
  controller uses to identify and interact with a cgroup) iteration
  update.  This is part of continuing updates on css object lifetime and
  visibility.  cgroup started with reference count draining on removal
  way back and is now reaching a point where csses behave and are
  iterated like normal refcnted objects albeit with some complexities to
  allow distinguishing the state where they're being deleted.  The css
  iteration update isn't taken advantage of yet but is planned to be
  used to simplify memcg significantly"

* 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (77 commits)
  cgroup: disallow disabled controllers on the default hierarchy
  cgroup: don't destroy the default root
  cgroup: disallow debug controller on the default hierarchy
  cgroup: clean up MAINTAINERS entries
  cgroup: implement css_tryget()
  device_cgroup: use css_has_online_children() instead of has_children()
  cgroup: convert cgroup_has_live_children() into css_has_online_children()
  cgroup: use CSS_ONLINE instead of CGRP_DEAD
  cgroup: iterate cgroup_subsys_states directly
  cgroup: introduce CSS_RELEASED and reduce css iteration fallback window
  cgroup: move cgroup->serial_nr into cgroup_subsys_state
  cgroup: link all cgroup_subsys_states in their sibling lists
  cgroup: move cgroup->sibling and ->children into cgroup_subsys_state
  cgroup: remove cgroup->parent
  device_cgroup: remove direct access to cgroup->children
  memcg: update memcg_has_children() to use css_next_child()
  memcg: remove tasks/children test from mem_cgroup_force_empty()
  cgroup: remove css_parent()
  cgroup: skip refcnting on normal root csses and cgrp_dfl_root self css
  cgroup: use cgroup->self.refcnt for cgroup refcnting
  ...
2014-06-09 15:03:33 -07:00
Li Zefan c731ae1d0f cgroup: disallow disabled controllers on the default hierarchy
After booting with cgroup_disable=memory, I still saw memcg files
in the default hierarchy, and I can write to them, though it won't
take effect.

  # dmesg
  ...
  Disabling memory control group subsystem
  ...
  # mount -t cgroup -o __DEVEL__sane_behavior xxx /cgroup
  # ls /cgroup
  ...
  memory.failcnt                   memory.move_charge_at_immigrate
  memory.force_empty               memory.numa_stat
  memory.limit_in_bytes            memory.oom_control
  ...
  # cat /cgroup/memory.usage_in_bytes
  0

tj: Minor comment update.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-06-05 09:52:51 -04:00
Li Zefan 1f779fb28a cgroup: don't destroy the default root
The default root is allocated and initialized at boot phase, so we
shouldn't destroy the default root when it's umounted, otherwise
it will lead to disaster.

Just try mount and then umount the default root, and the kernel will
crash immediately.

v2:
- No need to check for CSS_NO_REF in cgroup_get/put(). (Tejun)
- Better call cgroup_put() for the default root in kill_sb(). (Tejun)
- Add a comment.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-06-04 21:21:51 -04:00
Jianyu Zhan c9482a5bdc kernfs: move the last knowledge of sysfs out from kernfs
There is still one residue of sysfs remaining: the sb_magic
SYSFS_MAGIC. However this should be kernfs user specific,
so this patch moves it out. Kerrnfs user should specify their
magic number while mouting.

Signed-off-by: Jianyu Zhan <nasa4836@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-03 08:11:18 -07:00
Tejun Heo 5533e01144 cgroup: disallow debug controller on the default hierarchy
The debug controller, as its name suggests, exposes cgroup core
internals to userland to aid debugging.  Unfortunately, except for the
name, there's no provision to prevent its usage in production
configurations and the controller is widely enabled and mounted
leaking internal details to userland.  Like most other debug
information, the information exposed by debug isn't interesting even
for debugging itself once the related parts are working reliably.

This controller has no reason for existing.  This patch implements
cgrp_dfl_root_inhibit_ss_mask which can suppress specific subsystems
on the default hierarchy and adds the debug subsystem to it so that it
can be gradually deprecated as usages move towards the unified
hierarchy.

Signed-off-by: Tejun Heo <tj@kernel.org>
2014-05-19 16:37:06 -04:00
Tejun Heo f3d4650015 cgroup: convert cgroup_has_live_children() into css_has_online_children()
Now that cgroup liveliness and css onliness are the same state,
convert cgroup_has_live_children() into css_has_online_children() so
that it can be used for actual csses too.  The function now uses
css_for_each_child() for iteration and is published.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
2014-05-16 13:22:52 -04:00
Tejun Heo 184faf3232 cgroup: use CSS_ONLINE instead of CGRP_DEAD
Use CSS_ONLINE on the self css to indicate whether a cgroup has been
killed instead of CGRP_DEAD.  This will allow re-using css online test
for cgroup liveliness test.  This doesn't introduce any functional
change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
2014-05-16 13:22:51 -04:00
Tejun Heo c2931b70a3 cgroup: iterate cgroup_subsys_states directly
Currently, css_next_child() is implemented as finding the next child
cgroup which has the css enabled, which used to be the only way to do
it as only cgroups participated in sibling lists and thus could be
iteratd.  This works as long as what's required during iteration is
not missing online csses; however, it turns out that there are use
cases where offlined but not yet released csses need to be iterated.
This is difficult to implement through cgroup iteration the unified
hierarchy as there may be multiple dying csses for the same subsystem
associated with single cgroup.

After the recent changes, the cgroup self and regular csses behave
identically in how they're linked and unlinked from the sibling lists
including assertion of CSS_RELEASED and css_next_child() can simply
switch to iterating csses directly.  This both simplifies the logic
and ensures that all visible non-released csses are included in the
iteration whether there are multiple dying csses for a subsystem or
not.

As all other iterators depend on css_next_child() for sibling
iteration, this changes behaviors of all css iterators.  Add and
update explanations on the css states which are included in traversal
to all iterators.

As css iteration could always contain offlined csses, this shouldn't
break any of the current users and new usages which need iteration of
all on and offline csses can make use of the new semantics.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-05-16 13:22:51 -04:00