Граф коммитов

85 Коммитов

Автор SHA1 Сообщение Дата
stephen hemminger 729e72a109 macvlan: receive multicast with local address
When implementing VRRP v2 using macvlan several problems were
discovered.  VRRP is weird in that all routers participating
in a redundant group use the same virtual MAC address.
Macvlan is a natural driver to use for this but it doesn't
work.  The problem is that packets with a macvlan device's
source address are not received.

The problem is actually a regression that date back almost 2 years now.
The original problems started with:

commit 618e1b7482
Author: Arnd Bergmann <arnd@arndb.de>
Date:   Thu Nov 26 06:07:10 2009 +0000

    macvlan: implement bridge, VEPA and private mode

This patches restores the original 2.6.32 behavior. Allowing multicast
packets received with the VRRP source address to be received.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04 17:39:32 -04:00
Eric Dumazet bc416d9768 macvlan: handle fragmented multicast frames
Fragmented multicast frames are delivered to a single macvlan port,
because ip defrag logic considers other samples are redundant.

Implement a defrag step before trying to send the multicast frame.

Reported-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18 23:22:07 -04:00
David S. Miller 88c5100c28 Merge branch 'master' of github.com:davem330/net
Conflicts:
	net/batman-adv/soft-interface.c
2011-10-07 13:38:43 -04:00
David Ward cb2d0f3e96 macvlan/macvtap: Fix unicast between macvtap interfaces in bridge mode
Packets should always be forwarded to the lowerdev using dev_forward_skb.
vlan->forward is for packets being forwarded directly to another macvlan/
macvtap device (used for multicast in bridge mode).

Reported-and-tested-by: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-04 23:31:23 -04:00
Jiri Pirko 4bc71cb983 net: consolidate and fix ethtool_ops->get_settings calling
This patch does several things:
- introduces __ethtool_get_settings which is called from ethtool code and
  from drivers as well. Put ASSERT_RTNL there.
- dev_ethtool_get_settings() is replaced by __ethtool_get_settings()
- changes calling in drivers so rtnl locking is respected. In
  iboe_get_rate was previously ->get_settings() called unlocked. This
  fixes it. Also prb_calc_retire_blk_tmo() in af_packet.c had the same
  problem. Also fixed by calling __dev_get_by_index() instead of
  dev_get_by_index() and holding rtnl_lock for both calls.
- introduces rtnl_lock in bnx2fc_vport_create() and fcoe_vport_create()
  so bnx2fc_if_create() and fcoe_if_create() are called locked as they
  are from other places.
- use __ethtool_get_settings() in bonding code

Signed-off-by: Jiri Pirko <jpirko@redhat.com>

v2->v3:
	-removed dev_ethtool_get_settings()
	-added ASSERT_RTNL into __ethtool_get_settings()
	-prb_calc_retire_blk_tmo - use __dev_get_by_index() and lock
	 around it and __ethtool_get_settings() call
v1->v2:
        add missing export_symbol
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> [except FCoE bits]
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15 17:32:26 -04:00
Jiri Pirko afc4b13df1 net: remove use of ndo_set_multicast_list in drivers
replace it by ndo_set_rx_mode

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17 20:22:03 -07:00
Neil Horman 550fd08c2c net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared
After the last patch, We are left in a state in which only drivers calling
ether_setup have IFF_TX_SKB_SHARING set (we assume that drivers touching real
hardware call ether_setup for their net_devices and don't hold any state in
their skbs.  There are a handful of drivers that violate this assumption of
course, and need to be fixed up.  This patch identifies those drivers, and marks
them as not being able to support the safe transmission of skbs by clearning the
IFF_TX_SKB_SHARING flag in priv_flags

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Karsten Keil <isdn@linux-pingi.de>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: Patrick McHardy <kaber@trash.net>
CC: Krzysztof Halasa <khc@pm.waw.pl>
CC: "John W. Linville" <linville@tuxdriver.com>
CC: Greg Kroah-Hartman <gregkh@suse.de>
CC: Marcel Holtmann <marcel@holtmann.org>
CC: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27 22:39:30 -07:00
Jiri Pirko 4f7a4505f8 macvlan: do vlan cleanup
ndo_vlan_rx_register is no longer in use in any driver so remove it.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21 13:47:58 -07:00
John Fastabend 8d13e670d3 macvlan: add VLAN filters to lowerdev
Stacking VLANs on top of the macvlan device does not
work if the lowerdev device is using vlan filters set
by NETIF_F_HW_VLAN_FILTER. Add ndo ops to pass vlan
calls to lowerdev.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-06 16:43:43 -07:00
David Ward a37dd33323 macvlan: Forward unicast frames in bridge mode to lowerdev
Unicast frames between macvlan interfaces in bridge mode are not otherwise
sent to network taps on the lowerdev (as all other macvlan frames are), so
forward the frames to the receive queue of the lowerdev first.

Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-22 21:01:18 -04:00
Linus Torvalds 06f4e926d2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits)
  macvlan: fix panic if lowerdev in a bond
  tg3: Add braces around 5906 workaround.
  tg3: Fix NETIF_F_LOOPBACK error
  macvlan: remove one synchronize_rcu() call
  networking: NET_CLS_ROUTE4 depends on INET
  irda: Fix error propagation in ircomm_lmp_connect_response()
  irda: Kill set but unused variable 'bytes' in irlan_check_command_param()
  irda: Kill set but unused variable 'clen' in ircomm_connect_indication()
  rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport()
  be2net: Kill set but unused variable 'req' in lancer_fw_download()
  irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication()
  atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined.
  rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer().
  rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler()
  rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection()
  rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window()
  pkt_sched: Kill set but unused variable 'protocol' in tc_classify()
  isdn: capi: Use pr_debug() instead of ifdefs.
  tg3: Update version to 3.119
  tg3: Apply rx_discards fix to 5719/5720
  ...

Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c
as per Davem.
2011-05-20 13:43:21 -07:00
Eric Dumazet d93515611b macvlan: fix panic if lowerdev in a bond
commit a35e2c1b6d (macvlan: use rx_handler_data pointer to store
macvlan_port pointer V2) added a bug in macvlan_port_create()

Steps to reproduce the bug:

# ifenslave bond0 eth0 eth1

# ip link add link eth0 up name eth0#1 type macvlan
->error EBUSY

# ip link add link eth0 up name eth0#1 type macvlan
->panic


Fix: Dont set IFF_MACVLAN_PORT in error case.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-20 14:59:23 -04:00
Eric Dumazet 449f454426 macvlan: remove one synchronize_rcu() call
When one macvlan device is dismantled, we can avoid one
synchronize_rcu() call done after deletion from hash list, since caller
will perform a synchronize_net() call after its ndo_stop() call.

Add a new netdev->dismantle field to signal this dismantle intent.

Reduces RTNL hold time.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Patrick McHardy <kaber@trash.net>
CC: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-20 00:33:18 -04:00
Eric Dumazet 226bd34114 net: use batched device unregister in veth and macvlan
veth devices dont use the batched device unregisters yet.

Since veth are a pair of devices, it makes sense to use a batch of two
unregisters, this roughly divides dismantle time by two.

Fix this by changing dellink() callers to always provide a non NULL
head. (Idea from Michał Mirosław)

This patch also handles macvlan case : We now dismantle all macvlans on
top of a lower dev at once.

Reported-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Michał Mirosław <mirqus@gmail.com>
Cc: Jesse Gross <jesse@nicira.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09 11:41:40 -07:00
Lai Jiangshan 6e070aecd9 macvlan,rcu: convert call_rcu(macvlan_port_rcu_free) to kfree_rcu()
The rcu callback macvlan_port_rcu_free() just calls a kfree(),
so we use kfree_rcu() instead of the call_rcu(macvlan_port_rcu_free).

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-05-07 22:51:01 -07:00
Michał Mirosław 3918764666 net: macvlan: convert to hw_features
Not much of a conversion anyway - macvlan has no way to change the offload
settings independently to its base device.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17 17:40:24 -07:00
Eric W. Biederman d5cd92448f macvlan: Fix use after free of struct macvlan_port.
When the macvlan driver was extended to call unregisgter_netdevice_queue
in 23289a37e2, a use after free of struct
macvlan_port was introduced.  The code in dellink relied on unregister_netdevice
actually unregistering the net device so it would be safe to free macvlan_port.

Since unregister_netdevice_queue can just queue up the unregister instead of
performing the unregiser immediately we free the macvlan_port too soon and
then the code in macvlan_stop removes the macaddress for the set of macaddress
to listen for and uses memory that has already been freed.

To fix this add a reference count to track when it is safe to free the macvlan_port
and move the call of macvlan_port_destroy into macvlan_uninit which is guaranteed
to be called after the final macvlan_port_close.

Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-21 18:22:22 -07:00
Jiri Pirko 8a4eb5734e net: introduce rx_handler results and logic around that
This patch allows rx_handlers to better signalize what to do next to
it's caller. That makes skb->deliver_no_wcard no longer needed.

kernel-doc for rx_handler_result is taken from Nicolas' patch.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16 12:53:54 -07:00
Daniel Lezcano 12a2856b60 macvlan : fix checksums error when we are in bridge mode
When the lower device has offloading capabilities, the packets checksums
are not computed. That leads to have any macvlan port in bridge mode to
not work because the packets are dropped due to a bad checksum.

If the macvlan is in bridge mode, the packet is forwarded to another
macvlan port and reach the network stack where it looks for a checksum
but this one was not computed due to the offloading of the lower device.
In this case, we have to set the packet with CHECKSUM_UNNECESSARY
when it is forwarded to a bridged port and restore the previous value of
ip_summed when the packet goes to the lowerdev.

Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Andrian Nord <nightnord@gmail.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14 16:54:44 -07:00
Sridhar Samudrala eb06acdc85 macvlan: Introduce 'passthru' mode to takeover the underlying device
With the current default 'vepa' mode, a KVM guest using virtio with
macvtap backend has the following limitations.
- cannot change/add a mac address on the guest virtio-net
- cannot create a vlan device on the guest virtio-net
- cannot enable promiscuous mode on guest virtio-net

To address these limitations, this patch introduces a new mode called
'passthru' when creating a macvlan device which allows takeover of the
underlying device and passing it to a guest using virtio with macvtap
backend.

Only one macvlan device is allowed in passthru mode and it inherits
the mac address from the underlying device and sets it in promiscuous
mode to receive and forward all the packets.

Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>

-------------------------------------------------------------------------
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22 08:24:29 -08:00
Eric Dumazet 8ffab51b3d macvlan: lockless tx path
macvlan is a stacked device, like tunnels. We should use the lockless
mechanism we are using in tunnels and loopback.

This patch completely removes locking in TX path.

tx stat counters are added into existing percpu stat structure, renamed
from rx_stats to pcpu_stats.

Note : this reverts commit 2c11455321 (macvlan: add multiqueue
capability)

Note : rx_errors converted to a 32bit counter, like tx_dropped, since
they dont need 64bit range.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Ben Greear <greearb@candelatech.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-16 10:58:30 -08:00
David Lamparter 3b27e10555 netns: keep vlan slaves on master netns move
previously, if a vlan master device was moved from one network namespace
to another, all 802.1q and macvlan slaves were deleted.

we can use dev->reg_state to figure out whether dev_change_net_namespace
is happening, since that won't set dev->reg_state NETREG_UNREGISTERING.
so, this changes 8021q and macvlan to ignore NETDEV_UNREGISTER when
reg_state is not NETREG_UNREGISTERING.

Signed-off-by: David Lamparter <equinox@diac24.net>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17 16:46:04 -07:00
Sridhar Samudrala ba01877f56 macvlan: Fix rx counters update in macvlan_handle_frame()
Fix macvlan_handle_frame() to update the rx counters based
on the return value of the vlan->receive call.

Updated the patch to not do any packet count drops when the interface
is down based on Herber'ts comments.

Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27 21:02:42 -07:00
David S. Miller bb7e95c8fd Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/bnx2x_main.c

Merge bnx2x bug fixes in by hand... :-/

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27 21:01:35 -07:00
Herbert Xu 8a35747a5d macvtap: Limit packet queue length
Mark Wagner reported OOM symptoms when sending UDP traffic over
a macvtap link to a kvm receiver.

This appears to be caused by the fact that macvtap packet queues
are unlimited in length.  This means that if the receiver can't
keep up with the rate of flow, then we will hit OOM. Of course
it gets worse if the OOM killer then decides to kill the receiver.

This patch imposes a cap on the packet queue length, in the same
way as the tuntap driver, using the device TX queue length.

Please note that macvtap currently has no way of giving congestion
notification, that means the software device TX queue cannot be
used and packets will always be dropped once the macvtap driver
queue fills up.

This shouldn't be a great problem for the scenario where macvtap
is used to feed a kvm receiver, as the traffic is most likely
external in origin so congestion notification can't be applied
anyway.

Of course, if anybody decides to complain about guest-to-guest
UDP packet loss down the track, then we may have to revisit this.

Incidentally, this patch also fixes a real memory leak when
macvtap_get_queue fails.

Chris Wright noticed that for this patch to work, we need a
non-zero TX queue length.  This patch includes his work to change
the default macvtap TX queue length to 500.

Reported-by: Mark Wagner <mwagner@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-22 13:08:56 -07:00
Ben Hutchings 3cfde79c6c net: Get rid of rtnl_link_stats64 / net_device_stats union
In commit be1f3c2c02 "net: Enable 64-bit
net device statistics on 32-bit architectures" I redefined struct
net_device_stats so that it could be used in a union with struct
rtnl_link_stats64, avoiding the need for explicit copying or
conversion between the two.  However, this is unsafe because there is
no locking required and no lock consistently held around calls to
dev_get_stats() and use of the statistics structure it returns.

In commit 28172739f0 "net: fix 64 bit
counters on 32 bit arches" Eric Dumazet dealt with that problem by
requiring callers of dev_get_stats() to provide storage for the
result.  This means that the net_device::stats64 field and the padding
in struct net_device_stats are now redundant, so remove them.

Update the comment on net_device_ops::ndo_get_stats64 to reflect its
new usage.

Change dev_txq_stats_fold() to use struct rtnl_link_stats64, since
that is what all its callers are really using and it is no longer
going to be compatible with struct net_device_stats.

Eric Dumazet suggested the separate function for the structure
conversion.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09 17:41:56 -07:00
Eric Dumazet 28172739f0 net: fix 64 bit counters on 32 bit arches
There is a small possibility that a reader gets incorrect values on 32
bit arches. SNMP applications could catch incorrect counters when a
32bit high part is changed by another stats consumer/provider.

One way to solve this is to add a rtnl_link_stats64 param to all
ndo_get_stats64() methods, and also add such a parameter to
dev_get_stats().

Rule is that we are not allowed to use dev->stats64 as a temporary
storage for 64bit stats, but a caller provided area (usually on stack)

Old drivers (only providing get_stats() method) need no changes.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07 14:58:56 -07:00
Eric Dumazet bc66154efe macvlan: 64 bit rx counters
Use u64_stats_sync infrastructure to implement 64bit stats.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-28 23:24:30 -07:00
Jiri Pirko a35e2c1b6d macvlan: use rx_handler_data pointer to store macvlan_port pointer V2
Register macvlan_port pointer as rx_handler data pointer. As macvlan_port is
removed from struct net_device, another netdev priv_flag is added to indicate
the device serves as a macvlan port.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 11:47:12 -07:00
Jiri Pirko 93e2c32b5c net: add rx_handler data pointer
Add possibility to register rx_handler data pointer along with a rx_handler.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 11:47:11 -07:00
Jiri Pirko 8b37ef0a1f macvlan: use call_rcu for port free
Use call_rcu rather than synchronize_rcu.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-07 21:25:20 -07:00
Jiri Pirko ab95bfe01f net: replace hooks in __netif_receive_skb V5
What this patch does is it removes two receive frame hooks (for bridge and for
macvlan) from __netif_receive_skb. These are replaced them with a single
hook for both. It only supports one hook per device because it makes no
sense to do bridging and macvlan on the same device.

Then a network driver (of virtual netdev like macvlan or bridge) can register
an rx_handler for needed net device.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 07:11:15 -07:00
Jiri Pirko f16d3d5748 macvlan: do proper cleanup in macvlan_common_newlink() V2
Fixes possible memory leak.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-24 18:42:12 -07:00
Eric Dumazet 2d6c9ffcca net: congestion notifications are not dropped packets
vlan/macvlan start_xmit() can inform caller of congestion with
NET_XMIT_CN return value. This doesnt mean packet was dropped.
Increment normal stat counters instead of tx_dropped.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16 00:42:15 -07:00
Jiri Pirko a14462f1bd net: adjust handle_macvlan to pass port struct to hook
Now there's null check here and also again in the hook. Looking at bridge bits
which are simmilar, port structure is rcu_dereferenced right away in
handle_bridge and passed to hook. Looks nicer.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-15 23:48:02 -07:00
Jiri Pirko a748ee2426 net: move address list functions to a separate file
+little renaming of unicast functions to be smooth with multicast ones

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03 14:22:11 -07:00
Jiri Pirko 1c01fe14a8 net: forbid underlaying devices to change its type
It's not desired for underlaying devices to change type. At the time,
there is for example possible to have bond with changed type from
Ethernet to Infiniband as a port of a bridge. This patch fixes this.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18 20:00:02 -07:00
Arnd Bergmann fc0663d6b5 macvlan: allow multiple driver backends
This makes it possible to hook into the macvlan driver
from another kernel module. In particular, the goal is
to extend it with the macvtap backend that provides
a tun/tap compatible interface directly on the macvlan
device.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03 20:20:33 -08:00
Arnd Bergmann 8a83a00b07 net: maintain namespace isolation between vlan and real device
In the vlan and macvlan drivers, the start_xmit function forwards
data to the dev_queue_xmit function for another device, which may
potentially belong to a different namespace.

To make sure that classification stays within a single namespace,
this resets the potentially critical fields.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03 20:20:32 -08:00
Patrick Mullaney 6eb3a85533 macvlan: add GRO bit to features mask
Allow macvlan devices to support GRO.

Signed-off-by: Patrick Mullaney <pmullaney@novell.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-16 01:05:38 -08:00
Patrick Mullaney fc4a748966 netdevice: provide common routine for macvlan and vlan operstate management
Provide common routine for the transition of operational state for a leaf
device during a root device transition.

Signed-off-by: Patrick Mullaney <pmullaney@novell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 15:59:22 -08:00
David S. Miller 9b963e5d0e Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/ieee802154/fakehard.c
	drivers/net/e1000e/ich8lan.c
	drivers/net/e1000e/phy.c
	drivers/net/netxen/netxen_nic_init.c
	drivers/net/wireless/ath/ath9k/main.c
2009-11-29 00:57:15 -08:00
Arnd Bergmann 27c0b1a850 macvlan: export macvlan mode through netlink
In order to support all three modes of macvlan at
runtime, extend the existing netlink protocol
to allow choosing the mode per macvlan slave
interface.

This depends on a matching patch to iproute2
in order to become accessible in user land.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:53:10 -08:00
Arnd Bergmann 618e1b7482 macvlan: implement bridge, VEPA and private mode
This allows each macvlan slave device to be in one
of three modes, depending on the use case:

MACVLAN_PRIVATE:
  The device never communicates with any other device
  on the same upper_dev. This even includes frames
  coming back from a reflective relay, where supported
  by the adjacent bridge.

MACVLAN_VEPA:
  The new Virtual Ethernet Port Aggregator (VEPA) mode,
  we assume that the adjacent bridge returns all frames
  where both source and destination are local to the
  macvlan port, i.e. the bridge is set up as a reflective
  relay.
  Broadcast frames coming in from the upper_dev get
  flooded to all macvlan interfaces in VEPA mode.
  We never deliver any frames locally.

MACVLAN_BRIDGE:
  We provide the behavior of a simple bridge between
  different macvlan interfaces on the same port. Frames
  from one interface to another one get delivered directly
  and are not sent out externally. Broadcast frames get
  flooded to all other bridge ports and to the external
  interface, but when they come back from a reflective
  relay, we don't deliver them again.
  Since we know all the MAC addresses, the macvlan bridge
  mode does not require learning or STP like the bridge
  module does.

Based on an earlier patch "macvlan: Reflect macvlan packets
meant for other macvlan devices" by Eric Biederman.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Patrick McHardy <kaber@trash.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:53:07 -08:00
Arnd Bergmann a1e514c5d0 macvlan: cleanup rx statistics
We have very similar code for rx statistics in
two places in the macvlan driver, with a third
one being added in the next patch.

Consolidate them into one function to improve
overall readability of the driver.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:53:02 -08:00
Patrick McHardy 8c2acc53fd macvlan: fix gso_max_size setting
gso_max_size must be set based on the value of the underlying device to
support devices not using the full 64k.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23 14:18:53 -08:00
Eric Dumazet fccaf71011 macvlan: Precise RX stats accounting
With multi queue devices, its possible that several cpus call
macvlan RX routines simultaneously for the same macvlan device.

We update RX stats counter without any locking, so we can
get slightly wrong counters.

One possible fix is to use percpu counters, to get precise
accounting and also get guarantee of no cache line ping pongs
between cpus.

Note: this adds 16 bytes (32 bytes on 64bit arches) of percpu
data per macvlan device.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17 23:51:57 -08:00
Patrick McHardy cbbef5e183 vlan/macvlan: propagate transmission state to upper layers
Both vlan and macvlan devices usually don't use a qdisc and immediately
queue packets to the underlying device. Propagate transmission state of
the underlying device to the upper layers so they can react on congestion
and/or inform the sending process.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13 14:07:33 -08:00
Eric W. Biederman 81adee47df net: Support specifying the network namespace upon device creation.
There is no good reason to not support userspace specifying the
network namespace during device creation, and it makes it easier
to create a network device and pass it to a child network namespace
with a well known name.

We have to be careful to ensure that the target network namespace
for the new device exists through the life of the call.  To keep
that logic clear I have factored out the network namespace grabbing
logic into rtnl_link_get_net.

In addtion we need to continue to pass the source network namespace
to the rtnl_link_ops.newlink method so that we can find the base
device source network namespace.

Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
2009-11-08 00:53:51 -08:00
Eric Dumazet 23289a37e2 net: add a list_head parameter to dellink() method
Adding a list_head parameter to rtnl_link_ops->dellink() methods
allow us to queue devices on a list, in order to dismantle
them all at once.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28 02:22:07 -07:00