Граф коммитов

38 Коммитов

Автор SHA1 Сообщение Дата
Eric Paris 76f7ba35d4 SELinux: shrink sizeof av_inhert selinux_class_perm and context
I started playing with pahole today and decided to put it against the
selinux structures.  Found we could save a little bit of space on x86_64
(and no harm on i686) just reorganizing some structs.

Object size changes:
av_inherit: 24 -> 16
selinux_class_perm: 48 -> 40
context: 80 -> 72

Admittedly there aren't many of av_inherit or selinux_class_perm's in
the kernel (33 and 1 respectively) But the change to the size of struct
context reverberate out a bit.  I can get some hard number if they are
needed, but I don't see why they would be.  We do change which cacheline
context->len and context->str would be on, but I don't see that as a
problem since we are clearly going to have to load both if the context
is to be of any value.  I've run with the patch and don't seem to be
having any problems.

An example of what's going on using struct av_inherit would be:

form: to:
struct av_inherit {			struct av_inherit {
	u16 tclass;				const char **common_pts;
	const char **common_pts;		u32 common_base;
	u32 common_base;			u16 tclass;
};

(notice all I did was move u16 tclass to the end of the struct instead
of the beginning)

Memory layout before the change:
struct av_inherit {
	u16 tclass; /* 2 */
	/* 6 bytes hole */
	const char** common_pts; /* 8 */
	u32 common_base; /* 4 */
	/* 4 byes padding */

	/* size: 24, cachelines: 1 */
	/* sum members: 14, holes: 1, sum holes: 6 */
	/* padding: 4 */
};

Memory layout after the change:
struct av_inherit {
	const char ** common_pts; /* 8 */
	u32 common_base; /* 4 */
	u16 tclass; /* 2 */
	/* 2 bytes padding */

	/* size: 16, cachelines: 1 */
	/* sum members: 14, holes: 0, sum holes: 0 */
	/* padding: 2 */
};

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-01-05 19:19:55 +11:00
Harvey Harrison 3685f25de1 misc: replace NIPQUAD()
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u
can be replaced with %pI4

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-31 00:56:49 -07:00
Harvey Harrison 5b095d9892 net: replace %p6 with %pI6
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-29 12:52:50 -07:00
Harvey Harrison 1afa67f5e7 misc: replace NIP6_FMT with %p6 format specifier
The iscsi_ibft.c changes are almost certainly a bugfix as the
pointer 'ip' is a u8 *, so they never print the last 8 bytes
of the IPv6 address, and the eight bytes they do print have
a zero byte with them in each 16-bit word.

Other than that, this should cause no difference in functionality.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28 16:06:44 -07:00
KaiGai Kohei d9250dea3f SELinux: add boundary support and thread context assignment
The purpose of this patch is to assign per-thread security context
under a constraint. It enables multi-threaded server application
to kick a request handler with its fair security context, and
helps some of userspace object managers to handle user's request.

When we assign a per-thread security context, it must not have wider
permissions than the original one. Because a multi-threaded process
shares a single local memory, an arbitary per-thread security context
also means another thread can easily refer violated information.

The constraint on a per-thread security context requires a new domain
has to be equal or weaker than its original one, when it tries to assign
a per-thread security context.

Bounds relationship between two types is a way to ensure a domain can
never have wider permission than its bounds. We can define it in two
explicit or implicit ways.

The first way is using new TYPEBOUNDS statement. It enables to define
a boundary of types explicitly. The other one expand the concept of
existing named based hierarchy. If we defines a type with "." separated
name like "httpd_t.php", toolchain implicitly set its bounds on "httpd_t".

This feature requires a new policy version.
The 24th version (POLICYDB_VERSION_BOUNDARY) enables to ship them into
kernel space, and the following patch enables to handle it.

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2008-08-29 00:33:33 +10:00
Eric Paris b556f8ad58 Audit: standardize string audit interfaces
This patch standardized the string auditing interfaces.  No userspace
changes will be visible and this is all just cleanup and consistancy
work.  We have the following string audit interfaces to use:

void audit_log_n_hex(struct audit_buffer *ab, const unsigned char *buf, size_t len);

void audit_log_n_string(struct audit_buffer *ab, const char *buf, size_t n);
void audit_log_string(struct audit_buffer *ab, const char *buf);

void audit_log_n_untrustedstring(struct audit_buffer *ab, const char *string, size_t n);
void audit_log_untrustedstring(struct audit_buffer *ab, const char *string);

This may be the first step to possibly fixing some of the issues that
people have with the string output from the kernel audit system.  But we
still don't have an agreed upon solution to that problem.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-28 06:19:22 -04:00
Paul E. McKenney 6184425091 SELinux fixups needed for preemptable RCU from -rt
The attached patch needs to move from -rt to mainline given preemptable RCU.
This patch fixes SELinux code that implicitly assumes that disabling
preemption prevents an RCU grace period from completing, an assumption that
is valid for Classic RCU, but not necessarily for preemptable RCU.  Explicit
rcu_read_lock() calls are thus added.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-04-22 15:37:23 +10:00
Eric Paris 95fff33b8e SELinux: one little, two little, three little whitespaces, the avc.c saga.
avc.c was bad.  It had whitespace and syntax issues which are against
our coding style.  I have had a little chat with it and the result of
that conversation looked like this patch.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-04-21 19:12:02 +10:00
Eric Paris 744ba35e45 SELinux: clean up printks
Make sure all printk start with KERN_*
Make sure all printk end with \n
Make sure all printk have the word 'selinux' in them
Change "function name" to "%s", __func__ (found 2 wrong)

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-04-21 19:09:26 +10:00
Eric Paris 64dbf07474 selinux: introduce permissive types
Introduce the concept of a permissive type.  A new ebitmap is introduced to
the policy database which indicates if a given type has the permissive bit
set or not.  This bit is tested for the scontext of any denial.  The bit is
meaningless on types which only appear as the target of a decision and never
the source.  A domain running with a permissive type will be allowed to
perform any action similarly to when the system is globally set permissive.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2008-04-18 20:26:11 +10:00
Eric Paris eda4f69ca5 SELinux: requesting no permissions in avc_has_perm_noaudit is a BUG()
This patch turns the case where we have a call into avc_has_perm with no
requested permissions into a BUG_ON.  All callers to this should be in
the kernel and thus should be a function we need to fix if we ever hit
this.  The /selinux/access permission checking it done directly in the
security server and not through the avc, so those requests which we
cannot control from userspace should not be able to trigger this BUG_ON.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2008-04-18 20:26:09 +10:00
Jan Blunck 44707fdf59 d_path: Use struct path in struct avc_audit_data
audit_log_d_path() is a d_path() wrapper that is used by the audit code.  To
use a struct path in audit_log_d_path() I need to embed it into struct
avc_audit_data.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Acked-by: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14 21:17:08 -08:00
Paul Moore da5645a28a SELinux: Only store the network interface's ifindex
Instead of storing the packet's network interface name store the ifindex.  This
allows us to defer the need to lookup the net_device structure until the audit
record is generated meaning that in the majority of cases we never need to
bother with this at all.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-01-30 08:17:22 +11:00
Yuichi Nakamura 788e7dd4c2 SELinux: Improve read/write performance
It reduces the selinux overhead on read/write by only revalidating
permissions in selinux_file_permission if the task or inode labels have
changed or the policy has changed since the open-time check.  A new LSM
hook, security_dentry_open, is added to capture the necessary state at open
time to allow this optimization.

(see http://marc.info/?l=selinux&m=118972995207740&w=2)

Signed-off-by: Yuichi Nakamura<ynakam@hitachisoft.jp>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2007-10-17 08:59:31 +10:00
Al Viro 4259fa01a2 [PATCH] get rid of AVC_PATH postponed treatment
Selinux folks had been complaining about the lack of AVC_PATH
records when audit is disabled.  I must admit my stupidity - I assumed
that avc_audit() really couldn't use audit_log_d_path() because of
deadlocks (== could be called with dcache_lock or vfsmount_lock held).
Shouldn't have made that assumption - it never gets called that way.
It _is_ called under spinlocks, but not those.

        Since audit_log_d_path() uses ab->gfp_mask for allocations,
kmalloc() in there is not a problem.  IOW, the simple fix is sufficient:
let's rip AUDIT_AVC_PATH out and simply generate pathname as part of main
record.  It's trivial to do.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: James Morris <jmorris@namei.org>
2007-07-22 09:57:02 -04:00
Paul Mundt 20c2df83d2 mm: Remove slab destructors from kmem_cache_create().
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 10:11:58 +09:00
Tobias Oed 13bddc2e9d SELinux: Use %lu for inode->i_no when printing avc
Inode numbers are unsigned long and so need to %lu as format string of printf.

Signed-off-by: Tobias Oed <tobias.oed@octant-fr.com>
Signed-off-by: James Morris <jmorris@namei.org>
2007-07-11 22:52:27 -04:00
Stephen Smalley 2c3c05dbcb SELinux: allow preemption between transition permission checks
In security_get_user_sids, move the transition permission checks
outside of the section holding the policy rdlock, and use the AVC to
perform the checks, calling cond_resched after each one.  These
changes should allow preemption between the individual checks and
enable caching of the results.  It may however increase the overall
time spent in the function in some cases, particularly in the cache
miss case.

The long term fix will be to take much of this logic to userspace by
exporting additional state via selinuxfs, and ultimately deprecating
and eliminating this interface from the kernel.

Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2007-07-11 22:52:25 -04:00
Stephen Smalley a764ae4b07 selinux: remove userland security class and permission definitions
Remove userland security class and permission definitions from the kernel
as the kernel only needs to use and validate its own class and permission
definitions and userland definitions may change.

Signed-off-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2007-04-26 01:35:58 -04:00
Robert P. J. Day c376222960 [PATCH] Transform kmem_cache_alloc()+memset(0) -> kmem_cache_zalloc().
Replace appropriate pairs of "kmem_cache_alloc()" + "memset(0)" with the
corresponding "kmem_cache_zalloc()" call.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Roland McGrath <roland@redhat.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Greg KH <greg@kroah.com>
Acked-by: Joel Becker <Joel.Becker@oracle.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:27 -08:00
Christoph Lameter e18b890bb0 [PATCH] slab: remove kmem_cache_t
Replace all uses of kmem_cache_t with struct kmem_cache.

The patch was generated using the following script:

	#!/bin/sh
	#
	# Replace one string by another in all the kernel sources.
	#

	set -e

	for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
		quilt add $file
		sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
		mv /tmp/$$ $file
		quilt refresh
	done

The script was run like this

	sh replace kmem_cache_t "struct kmem_cache"

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:25 -08:00
Christoph Lameter 54e6ecb239 [PATCH] slab: remove SLAB_ATOMIC
SLAB_ATOMIC is an alias of GFP_ATOMIC

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:24 -08:00
Al Viro 87fcd70d98 [PATCH] selinux endianness annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-04 19:32:44 -08:00
Chad Sellers 5c45899879 SELinux: export object class and permission definitions
Moves the definition of the 3 structs containing object class and
permission definitions from avc.c to avc_ss.h so that the security
server can access them for validation on policy load. This also adds
a new struct type, defined_classes_perms_t, suitable for allowing the
security server to access these data structures from the avc.

Signed-off-by: Chad Sellers <csellers@tresys.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2006-11-28 12:04:36 -05:00
Darrel Goeddel 376bd9cb35 [PATCH] support for context based audit filtering
The following patch provides selinux interfaces that will allow the audit
system to perform filtering based on the process context (user, role, type,
sensitivity, and clearance).  These interfaces will allow the selinux
module to perform efficient matches based on lower level selinux constructs,
rather than relying on context retrievals and string comparisons within
the audit module.  It also allows for dominance checks on the mls portion
of the contexts that are impossible with only string comparisons.

Signed-off-by: Darrel Goeddel <dgoeddel@trustedcs.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-05-01 06:06:24 -04:00
Stephen Smalley 99f6d61bda [PATCH] selinux: require AUDIT
Make SELinux depend on AUDIT as it requires the basic audit support to log
permission denials at all.  Note that AUDITSYSCALL remains optional for
SELinux, although it can be useful in providing further information upon
denials.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-07 16:12:33 -08:00
Joe Perches 46b86a2da0 [NET]: Use NIP6_FMT in kernel.h
There are errors and inconsistency in the display of NIP6 strings.
	ie: net/ipv6/ip6_flowlabel.c

There are errors and inconsistency in the display of NIPQUAD strings too.
	ie: net/netfilter/nf_conntrack_ftp.c

This patch:
	adds NIP6_FMT to kernel.h
	changes all code to use NIP6_FMT
	fixes net/ipv6/ip6_flowlabel.c
	adds NIPQUAD_FMT to kernel.h
	fixes net/netfilter/nf_conntrack_ftp.c
	changes a few uses of "%u.%u.%u.%u" to NIPQUAD_FMT for symmetry to NIP6_FMT

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 14:29:07 -08:00
Linus Torvalds 5d54e69c68 Merge master.kernel.org:/pub/scm/linux/kernel/git/dwmw2/audit-2.6 2005-09-13 09:47:30 -07:00
Alexey Dobriyan b5bf6c55ed [PATCH] selinux: endian notations
This patch adds endian notations to the SELinux code.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:51 -07:00
David Woodhouse 9ad9ad385b AUDIT: Wait for backlog to clear when generating messages.
Add a gfp_mask to audit_log_start() and audit_log(), to reduce the
amount of GFP_ATOMIC allocation -- most of it doesn't need to be 
GFP_ATOMIC. Also if the mask includes __GFP_WAIT, then wait up to
60 seconds for the auditd backlog to clear instead of immediately 
abandoning the message. 

The timeout should probably be made configurable, but for now it'll 
suffice that it only happens if auditd is actually running.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-22 15:04:33 +01:00
Stephen Smalley 37ca5389b8 AUDIT: Fix remaining cases of direct logging of untrusted strings by avc_audit
Per Steve Grubb's observation that there are some remaining cases where
avc_audit() directly logs untrusted strings without escaping them, here
is a patch that changes avc_audit() to use audit_log_untrustedstring()
or audit_log_hex() as appropriate.  Note that d_name.name is nul-
terminated by d_alloc(), and that sun_path is nul-terminated by
unix_mkname(), so it is not necessary for the AVC to create nul-
terminated copies or to alter audit_log_untrustedstring to take a length
argument.  In the case of an abstract name, we use audit_log_hex() with
an explicit length.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-24 21:28:28 +01:00
David Woodhouse 7b5d781ce1 Fix oops due to thinko in avc_audit()
When I added the logging of pid= and comm= back to avc_audit() I 
screwed it up. Put it back how it should be.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-21 16:52:57 +01:00
Stephen Smalley 011161051b AUDIT: Avoid sleeping function in SElinux AVC audit.
This patch changes the SELinux AVC to defer logging of paths to the audit
framework upon syscall exit, by saving a reference to the (dentry,vfsmount)
pair in an auxiliary audit item on the current audit context for processing
by audit_log_exit.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-21 00:15:52 +01:00
David Woodhouse cd77b8212d Restore logging of pid= and comm= in AVC audit messages
We turned this all off because the 'exe=' was causing deadlocks on
dcache_lock. There's no need to leave the pid and comm out though. 
They'll all be logged correctly if full auditing is enabled, but we
should still print them in case auditing _isn't_ enabled.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-19 11:18:24 +01:00
Steve Grubb c04049939f AUDIT: Add message types to audit records
This patch adds more messages types to the audit subsystem so that audit 
analysis is quicker, intuitive, and more useful.

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
---
I forgot one type in the big patch. I need to add one for user space 
originating SE Linux avc messages. This is used by dbus and nscd.

-Steve
---
Updated to 2.6.12-rc4-mm1.
-dwmw2

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-13 18:17:42 +01:00
Chris Wright c1b773d87e Add audit_log_type
Add audit_log_type to allow callers to specify type and pid when logging.
Convert audit_log to wrapper around audit_log_type.  Could have
converted all audit_log callers directly, but common case is default
of type AUDIT_KERNEL and pid 0.  Update audit_log_start to take type
and pid values when creating a new audit_buffer.  Move sequences that
did audit_log_start, audit_log_format, audit_set_type, audit_log_end,
to simply call audit_log_type directly.  This obsoletes audit_set_type
and audit_set_pid, so remove them.

Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-11 10:55:10 +01:00
Stephen Smalley 219f081703 [PATCH] SELinux: fix deadlock on dcache lock
This fixes a deadlock on the dcache lock detected during testing at IBM
by moving the logging of the current executable information from the
SELinux avc_audit function to audit_log_exit (via an audit_log_task_info
helper) for processing upon syscall exit. 

For consistency, the patch also removes the logging of other
task-related information from avc_audit, deferring handling to
audit_log_exit instead. 

This allows simplification of the avc_audit code, allows the exe
information to be obtained more reliably, always includes the comm
information (useful for scripts), and avoids including bogus task
information for checks performed from irq or softirq. 

Signed-off-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by:  James Morris <jmorris@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-18 10:47:35 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00