The mptcp ULP extension relies on sk->sk_sock_kern being set correctly:
It prevents setsockopt(fd, IPPROTO_TCP, TCP_ULP, "mptcp", 6); from
working for plain tcp sockets (any userspace-exposed socket).
But in case of fallback, accept() can return a plain tcp sk.
In such case, sk is still tagged as 'kernel' and setsockopt will work.
This will crash the kernel, The subflow extension has a NULL ctx->conn
mptcp socket:
BUG: KASAN: null-ptr-deref in subflow_data_ready+0x181/0x2b0
Call Trace:
tcp_data_ready+0xf8/0x370
[..]
Fixes: cf7da0d66c ("mptcp: Create SUBFLOW socket for incoming connections")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP_ULP setsockopt cannot be used for mptcp because its already
used internally to plumb subflow (tcp) sockets to the mptcp layer.
syzbot managed to trigger a crash for mptcp connections that are
in fallback mode:
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
CPU: 1 PID: 1083 Comm: syz-executor.3 Not tainted 5.16.0-rc2-syzkaller #0
RIP: 0010:tls_build_proto net/tls/tls_main.c:776 [inline]
[..]
__tcp_set_ulp net/ipv4/tcp_ulp.c:139 [inline]
tcp_set_ulp+0x428/0x4c0 net/ipv4/tcp_ulp.c:160
do_tcp_setsockopt+0x455/0x37c0 net/ipv4/tcp.c:3391
mptcp_setsockopt+0x1b47/0x2400 net/mptcp/sockopt.c:638
Remove support for TCP_ULP setsockopt.
Fixes: d9e4c12918 ("mptcp: only admit explicitly supported sockopt")
Reported-by: syzbot+1fd9b69cde42967d1add@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
First, add cork and nodelay fields to the mptcp_sock structure
so they can be used in sync_socket_options(), and fill them on setsockopt
while holding the msk socket lock.
Then, on setsockopt set proper tcp_sk(ssk)->nonagle values for subflows
by calling __tcp_sock_set_cork() or __tcp_sock_set_nodelay() on the ssk
while holding the ssk socket lock.
tcp_push_pending_frames() will be invoked on the ssk if a cork was cleared
or nodelay was set. Also set MPTCP_PUSH_PENDING bit by calling
mptcp_check_and_set_pending(). This will lead to __mptcp_push_pending()
being called inside mptcp_release_cb() with new tcp_sk(ssk)->nonagle.
Also add getsockopt support for TCP_CORK and TCP_NODELAY.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Maxim Galaganov <max@internet.ru>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose the mptcp_check_and_set_pending() function for use inside MPTCP
sockopt code. The next patch will call it when TCP_CORK is cleared or
TCP_NODELAY is set on the MPTCP socket in order to push pending data
from mptcp_release_cb().
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Maxim Galaganov <max@internet.ru>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
earlier patch added IP_TOS setsockopt support, this allows to get
the value set by earlier setsockopt.
Extends mptcp_put_int_option to handle u8 input/output by
adding required cast.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
a non-zero 'id' is sufficient to identify MPTCP endpoints: allow changing
the value of 'backup' bit by simply specifying the endpoint id.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/158
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allows to query in-sequence data ready for read(), total bytes in
write queue and total bytes in write queue that have not yet been sent.
v2: remove unneeded READ_ONCE() (Paolo Abeni)
v3: check for new data unconditionally in SIOCINQ ioctl (Mat Martineau)
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support the TCP_INQ setsockopt.
This is a boolean that tells recvmsg path to include the remaining
in-sequence bytes in the cmsg data.
v2: do not use CB(skb)->offset, increment map_seq instead (Paolo Abeni)
v3: adjust CB(skb)->map_seq when taking skb from ofo queue (Paolo Abeni)
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/224
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Scheduling a delack in mptcp_established_options_mp() is
not a good idea: such function is called by tcp_send_ack() and
the pending delayed ack will be cleared shortly after by the
tcp_event_ack_sent() call in __tcp_transmit_skb().
Instead use the mptcp delegated action infrastructure to
schedule the delayed ack after the current bh processing completes.
Additionally moves the schedule_3rdack_retransmission() helper
into protocol.c to avoid making it visible in a different compilation
unit.
Fixes: ec3edaa7ca ("mptcp: Add handling of outgoing MP_JOIN requests")
Reviewed-by: Mat Martineau <mathew.j.martineau>@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To compute the rtx timeout schedule_3rdack_retransmission() does multiple
things in the wrong way: srtt_us is measured in usec/8 and the timeout
itself is an absolute value.
Fixes: ec3edaa7ca ("mptcp: Add handling of outgoing MP_JOIN requests")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau>@linux.intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These options also need to be set before bind, so do the sync of msk to
new ssk socket a bit earlier.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SOL_IP provides a way to configure network layer attributes in a
socket. This patch adds support for IP_TOS for setsockopt(.. ,SOL_IP, ..)
Support for SOL_IP is added in mptcp_setsockopt() and IP_TOS is handled in
a private function. The idea here is to take in the value passed for IP_TOS
and set it to the current subflow, open subflows as well new subflows that
might be created after the initial call to setsockopt(). This sync is done
using sync_socket_options(.., ssk) and setting the value of tos using
__ip_sock_set_tos(ssk,..).
The patch has been tested using the packetdrill script here -
https://github.com/multipath-tcp/mptcp_net-next/issues/220#issuecomment-947863717
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/220
Signed-off-by: Poorva Sonparote <psonparo@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MPTCP hard codes it, let us instead provide this helper.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_memory_allocated and tcp_sockets_allocated often share
a common cache line, source of false sharing.
Also take care of udp_memory_allocated and mptcp_sockets_allocated.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
using packetdrill it's possible to observe that the receiver key contains
random values when clients transmit MP_CAPABLE with data and checksum (as
specified in RFC8684 §3.1). Fix the layout of mptcp_out_options, to avoid
using the skb extension copy when writing the MP_CAPABLE sub-option.
Fixes: d7b2690837 ("mptcp: shrink mptcp_out_options struct")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/233
Reported-by: Poorva Sonparote <psonparo@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20211027203855.264600-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Setting skb->ip_summed to CHECKSUM_PARTIAL can be centralized
in tcp_stream_alloc_skb() and __mptcp_do_alloc_tx_skb()
instead of being done multiple times.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP/MPTCP sendmsg() no longer puts payload in skb->head,
we can remove not needed code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All tcp_remove_empty_skb() callers now use tcp_write_queue_tail()
for the skb argument, we can therefore factorize code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since mptcp_set_timeout() had removed from mptcp_push_release() in
commit 33d41c9cd7 ("mptcp: more accurate timeout"), the argument
sk in mptcp_push_release() became useless. Let's drop it.
Fixes: 33d41c9cd7 ("mptcp: more accurate timeout")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All the mptcp receive path is protected by the msk socket
spinlock. As consequences, the tx path has to play a few tricks to
allocate the forward memory without acquiring the spinlock multiple
times, making the overall TX path quite complex.
This patch tries to clean-up a bit the tx path, using completely
separated fwd memory allocation, for the rx and the tx path.
The forward memory allocated in the rx path is now accounted in
msk->rmem_fwd_alloc and is (still) protected by the msk socket spinlock.
To cope with the above we provide a few MPTCP-specific variants for
the helpers to charge, uncharge, reclaim and free the forward memory
in the receive path.
msk->sk_forward_alloc now accounts only the forward memory for the tx
path, we can use the plain core sock helper to manipulate it and drop
quite a bit of complexity.
On memory pressure, both rx and tx fwd memories are reclaimed.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function is only used within pm_netlink.c now.
Fixes: 067065422f ("mptcp: add the outgoing MP_PRIO support")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current default does not allowing additional subflows, mostly
as a safety restriction to avoid uncontrolled resource consumption
on busy servers.
Still the system admin and/or the application have to opt-in to
MPTCP explicitly. After that, they need to change (increase) the
default maximum number of additional subflows.
Let set that to reasonable default, and make end-users life easier.
Additionally we need to update some self-tests accordingly.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Coverity complains of a possible NULL dereference in
mptcp_getsockopt_subflow_addrs():
861 } else if (sk->sk_family == AF_INET6) {
3. returned_null: inet6_sk returns NULL. [show details]
4. var_assigned: Assigning: np = NULL return value from inet6_sk.
862 const struct ipv6_pinfo *np = inet6_sk(sk);
Fix this by checking for NULL.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/231
Fixes: c11c5906bc ("mptcp: add MPTCP_SUBFLOW_ADDRS getsockopt support")
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
[mjm: Added WARN_ON_ONCE() to the unexpected case]
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tools/testing/selftests/net/ioam6.sh
7b1700e009 ("selftests: net: modify IOAM tests for undef bits")
bf77b1400a ("selftests: net: Test for the IOAM encapsulation with IPv6")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using snmp_get_cpu_field_batch() allows for better cpu cache
utilization, especially on hosts with large number of cpus.
Also remove special handling when mptcp mibs where not yet
allocated.
I chose to use temporary storage on the stack to keep this patch simple.
We might in the future use the storage allocated in netstat_seq_show().
Combined with prior patch (inlining snmp_get_cpu_field)
time to fetch and output mptcp counters on a 256 cpu host [1]
goes from 75 usec to 16 usec.
[1] L1 cache size is 32KB, it is not big enough to hold all dataset.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The retransmit head will be NULL in case there is no in-flight data
(meaning all data injected into network has been acked).
In that case the retransmit timer is stopped.
This is only correct if there is no more pending, not-yet-sent data.
If there is, the retransmit timer needs to set the PENDING bit again so
that mptcp tries to send the remaining (new) data once a subflow can accept
more data.
Also, mptcp_subflow_get_retrans() has to be called unconditionally.
This function checks for subflows that have become unresponsive and marks
them as stale, so in the case where the rtx queue is empty, subflows
will never be marked stale which prevents available backup subflows from
becoming eligible for transmit.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/226
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The update on recovery is not correct.
msk->tx_pending_data += msk->snd_nxt - rtx_head->data_seq;
will update tx_pending_data multiple times when a subflow is declared
stale while earlier recovery is still in progress.
This means that tx_pending_data will still be positive even after
all data as has been transmitted.
Rather than fix it, remove this field: there are no consumers.
The outstanding data byte count can be computed either via
"msk->write_seq - rtx_head->data_seq" or
"msk->write_seq - msk->snd_una".
The latter is more recent/accurate estimate as rtx_head adjustment
is deferred until mptcp lock can be acquired.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have a few more places where the mptcp code duplicates
lockdep_assert_held_once(). Let's use the existing macro and
avoid a bunch of compiler's conditional.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since OPTIONS_MPTCP_MPC has been defined, use it instead of open-coding.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When recovering after a link failure, snd_nxt should not be set to a
lower value. Else, update of snd_nxt is broken because:
msk->snd_nxt += ret; (where ret is number of bytes sent)
assumes that snd_nxt always moves forward.
After reduction, its possible that snd_nxt update gets out of sync:
dfrag we just sent might have had a data sequence number even past
recovery_snd_nxt.
This change factors the common msk state update to a helper
and updates snd_nxt based on the current dfrag data sequence number.
The conditional is required for the recovery phase where we may
re-transmit old dfrags that are before current snd_nxt.
After this change, snd_nxt only moves forward and covers all in-sequence
data that was transmitted.
recovery_snd_nxt is retained to detect when recovery has completed.
Fixes: 1e1d9d6f11 ("mptcp: handle pending data on closed subflow")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
current Linux refuses to change the 'backup' bit of MPTCP endpoints, i.e.
using MPTCP_PM_CMD_SET_FLAGS, unless it finds (at least) one subflow that
matches the endpoint address. There is no reason for that, so we can just
ignore the return value of mptcp_nl_addr_backup(). In this way, endpoints
can reconfigure their 'backup' flag even if no MPTCP sockets are open (or
more generally, in case the MP_PRIO message is not sent out).
Fixes: 0f9f696a50 ("mptcp: add set_flags command in PM netlink")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_token_get_sock() may return a mptcp socket that is in
a different net namespace than the socket that received the token value.
The mptcp syncookie code path had an explicit check for this,
this moves the test into mptcp_token_get_sock() function.
Eventually token.c should be converted to pernet storage, but
such change is not suitable for net tree.
Fixes: 2c5ebd001d ("mptcp: refactor token container")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to revert the skb TX cache, but MPTCP is currently
using it unconditionally.
Rework the MPTCP tx code, so that tcp_tx_skb_cache is not
needed anymore: do the whole coalescing check, skb allocation
skb initialization/update inside mptcp_sendmsg_frag(), quite
alike the current TCP code.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This retrieves the address pairs of all subflows currently
active for a given mptcp connection.
It re-uses the same meta-header as for MPTCP_TCPINFO.
A new structure is provided to hold the subflow
address data:
struct mptcp_subflow_addrs {
union {
__kernel_sa_family_t sa_family;
struct sockaddr sa_local;
struct sockaddr_in sin_local;
struct sockaddr_in6 sin6_local;
struct sockaddr_storage ss_local;
};
union {
struct sockaddr sa_remote;
struct sockaddr_in sin_remote;
struct sockaddr_in6 sin6_remote;
struct sockaddr_storage ss_remote;
};
};
Usage of the new getsockopt is very similar to
MPTCP_TCPINFO one.
Userspace allocates a
'struct mptcp_subflow_data', followed by one or
more 'struct mptcp_subflow_addrs', then inits the
mptcp_subflow_data structure as follows:
struct mptcp_subflow_addrs *sf_addr;
struct mptcp_subflow_data *addr;
socklen_t olen = sizeof(*addr) + (8 * sizeof(*sf_addr));
addr = malloc(olen);
addr->size_subflow_data = sizeof(*addr);
addr->num_subflows = 0;
addr->size_kernel = 0;
addr->size_user = sizeof(struct mptcp_subflow_addrs);
sf_addr = (struct mptcp_subflow_addrs *)(addr + 1);
and then retrieves the endpoint addresses via:
ret = getsockopt(fd, SOL_MPTCP, MPTCP_SUBFLOW_ADDRS,
addr, &olen);
If the call succeeds, kernel will have added up to 8
endpoint addresses after the 'mptcp_subflow_data' header.
Userspace needs to re-check 'olen' value to detect how
many bytes have been filled in by the kernel.
Userspace can check addr->num_subflows to discover when
there were more subflows that available data space.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow users to retrieve TCP_INFO data of all subflows.
Users need to pre-initialize a meta header that has to be
prepended to the data buffer that will be filled with the tcp info data.
The meta header looks like this:
struct mptcp_subflow_data {
__u32 size_subflow_data;/* size of this structure in userspace */
__u32 num_subflows; /* must be 0, set by kernel */
__u32 size_kernel; /* must be 0, set by kernel */
__u32 size_user; /* size of one element in data[] */
} __attribute__((aligned(8)));
size_subflow_data has to be set to 'sizeof(struct mptcp_subflow_data)'.
This allows to extend mptcp_subflow_data structure later on without
breaking backwards compatibility.
If the structure is extended later on, kernel knows where the
userspace-provided meta header ends, even if userspace uses an older
(smaller) version of the structure.
num_subflows must be set to 0. If the getsockopt request succeeds (return
value is 0), it will be updated to contain the number of active subflows
for the given logical connection.
size_kernel must be set to 0. If the getsockopt request is successful,
it will contain the size of the 'struct tcp_info' as known by the kernel.
This is informational only.
size_user must be set to 'sizeof(struct tcp_info)'.
This allows the kernel to only fill in the space reserved/expected by
userspace.
Example:
struct my_tcp_info {
struct mptcp_subflow_data d;
struct tcp_info ti[2];
};
struct my_tcp_info ti;
socklen_t olen;
memset(&ti, 0, sizeof(ti));
ti.d.size_subflow_data = sizeof(struct mptcp_subflow_data);
ti.d.size_user = sizeof(struct tcp_info);
olen = sizeof(ti);
ret = getsockopt(fd, SOL_MPTCP, MPTCP_TCPINFO, &ti, &olen);
if (ret < 0)
die_perror("getsockopt MPTCP_TCPINFO");
mptcp_subflow_data.num_subflows is populated with the number of
subflows that exist on the kernel side for the logical mptcp connection.
This allows userspace to re-try with a larger tcp_info array if the number
of subflows was larger than the available space in the ti[] array.
olen has to be set to the number of bytes that userspace has allocated to
receive the kernel data. It will be updated to contain the real number
bytes that have been copied to by the kernel.
In the above example, if the number if subflows was 1, olen is equal to
'sizeof(struct mptcp_subflow_data) + sizeof(struct tcp_info).
For 2 or more subflows olen is equal to 'sizeof(struct my_tcp_info)'.
If there was more data that could not be copied due to lack of space
in the option buffer, userspace can detect this by checking
mptcp_subflow_data->num_subflows.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Its not compatible with multipath-tcp.org kernel one.
1. The out-of-tree implementation defines a different 'struct mptcp_info',
with embedded __user addresses for additional data such as
endpoint addresses.
2. Mat Martineau points out that embedded __user addresses doesn't work
with BPF_CGROUP_RUN_PROG_GETSOCKOPT() which assumes that copying in
optsize bytes from optval provides all data that got copied to userspace.
This provides mptcp_info data for the given mptcp socket.
Userspace sets optlen to the size of the structure it expects.
The kernel updates it to contain the number of bytes that it copied.
This allows to append more information to the structure later.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Will be re-used from getsockopt path.
Since diag can be a module, we can't export the helper from diag, it
needs to be moved to core.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian noted that if mptcp_alloc_tx_skb() allocation fails
in __mptcp_push_pending(), we can end-up invoking
mptcp_push_release()/tcp_push() with a zero mss, causing
a divide by 0 error.
This change addresses the issue refactoring the skb allocation
code checking if skb collapsing will happen for sure and doing
the skb allocation only after such check. Skb allocation will
now happen only after the call to tcp_send_mss() which
correctly initializes mss_now.
As side bonuses we now fill the skb tx cache only when needed,
and this also clean-up a bit the output path.
v1 -> v2:
- use lockdep_assert_held_once() - Jakub
- fix indentation - Jakub
Reported-by: Florian Westphal <fw@strlen.de>
Fixes: 724cfd2ee8 ("mptcp: allocate TX skbs in msk context")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the following coccicheck warning:
./net/mptcp/protocol.h:36:50-73: duplicated argument to & or |
The OPTION_MPTCP_MPJ_SYNACK here is duplicate.
Here should be OPTION_MPTCP_MPJ_ACK.
Fixes: 74c7dfbee3 ("mptcp: consolidate in_opt sub-options fields in a bitmask")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian noted the locking schema used by __mptcp_push_pending()
is hard to follow, let's add some more descriptive comments
and drop an unneeded and confusing check.
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most MPTCP packets carries a single MPTCP subption: the
DSS containing the mapping for the current packet.
Check explicitly for the above, so that is such scenario we
replace most conditional statements with a single likely() one.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This makes input options processing more consistent with
output ones and will simplify the next patch.
Also avoid clearing the suboption field after processing
it, since it's not needed.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change reorder the mptcp_options_received fields
to shrink the structure a bit and to ensure the most
frequently used fields are all in the first cacheline.
Sub-opt specific flags are moved out of the suboptions area,
and we must now explicitly set them when the relevant
suboption is parsed.
There is a notable exception: 'csum_reqd' is used by both DSS
and MPC suboptions, and keeping such field in the suboptions
flag area will simplfy the next patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Should be set only if the ingress packets present it, otherwise
we can confuse csum validation.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added the mibs for MP_FAIL: MPTCP_MIB_MPFAILTX and
MPTCP_MIB_MPFAILRX.
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a bad checksum is detected, set the send_mp_fail flag to send out
the MP_FAIL option.
Add a new function mptcp_has_another_subflow() to check whether there's
only a single subflow.
When multiple subflows are in use, close the affected subflow with a RST
that includes an MP_FAIL option and discard the data with the bad
checksum.
Set the sk_state of the subsocket to TCP_CLOSE, then the flag
MPTCP_WORK_CLOSE_SUBFLOW will be set in subflow_sched_work_if_closed,
and the subflow will be closed.
When a single subfow is in use, temporarily handled by sending MP_FAIL
with a RST too.
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added handling for receiving MP_FAIL suboption.
Add a new members mp_fail and fail_seq in struct mptcp_options_received.
When MP_FAIL suboption is received, set mp_fail to 1 and save the sequence
number to fail_seq.
Then invoke mptcp_pm_mp_fail_received to deal with the MP_FAIL suboption.
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added the MP_FAIL suboption sending support.
Add a new flag named send_mp_fail in struct mptcp_subflow_context. If
this flag is set, send out MP_FAIL suboption.
Add a new member fail_seq in struct mptcp_out_options to save the data
sequence number to put into the MP_FAIL suboption.
An MP_FAIL option could be included in a RST or on the subflow-level
ACK.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we have several protocol constraints on MPTCP options
generation (e.g. MPC and MPJ subopt are mutually exclusive)
and some additional ones required by our implementation
(e.g. almost all ADD_ADDR variant are mutually exclusive with
everything else).
We can leverage the above to optimize the out option generation:
we check DSS/MPC/MPJ presence in a mutually exclusive way,
avoiding many unneeded conditionals in the common cases.
Additionally extend the existing constraints on ADD_ADDR opt on
all subvariants, so that it becomes fully mutually exclusive with
the above and we can skip another conditional statement for the
common case.
This change is also needed by the next patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MPTCP_ADD_ADDR_IPV6 and MPTCP_ADD_ADDR_PORT are not necessary, we can get
these info from pm.local or pm.remote.
Drop mptcp_pm_should_add_signal_ipv6 and mptcp_pm_should_add_signal_port
too.
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the MPTCP_ADD_ADDR_SIGNAL or MPTCP_ADD_ADDR_ECHO flag, build
the ADD_ADDR/ADD_ADDR_ECHO option.
In mptcp_pm_add_addr_signal(), use opts->addr to save the announced
ADD_ADDR or ADD_ADDR_ECHO address.
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ADD_ADDR shares pm.addr_signal with RM_ADDR, so after RM_ADDR/ADD_ADDR
has done, we should not clean ADD_ADDR/RM_ADDR's addr_signal.
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use MPTCP_ADD_ADDR_SIGNAL only for the action of sending ADD_ADDR, and
use MPTCP_ADD_ADDR_ECHO only for the action of sending ADD_ADDR echo.
Use msk->pm.local to save the announced ADD_ADDR address only, and reuse
msk->pm.remote to save the announced ADD_ADDR_ECHO address.
To prepare for the next patch.
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moved the drop_other_suboptions check from
mptcp_established_options_add_addr() into mptcp_pm_add_addr_signal(), do
it under the PM lock to avoid the race between this check and
mptcp_pm_add_addr_signal().
For this, added a new parameter for mptcp_pm_add_addr_signal() to get
the drop_other_suboptions value. And drop the other suboptions after the
option length check if drop_other_suboptions is true.
Additionally, always drop the other suboption for TCP pure ack:
that makes both the code simpler and the MPTCP behaviour more
consistent.
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If directly after an MP_CAPABLE 3WHS, the client receives an ADD_ADDR
with HMAC from the server, it is enough to switch to a "fully
established" mode because it has received more MPTCP options.
It was then OK to enable the "fully_established" flag on the MPTCP
socket. Still, best to check if the ADD_ADDR looks valid by looking if
it contains an HMAC (no 'echo' bit). If an ADD_ADDR echo is received
while we are not in "fully established" mode, it is strange and then
we should not switch to this mode now.
But that is not enough. On one hand, the path-manager has be notified
the state has changed. On the other hand, the "fully_established" flag
on the subflow socket should be turned on as well not to re-send the
MP_CAPABLE 3rd ACK content with the next ACK.
Fixes: 84dfe3677a ("mptcp: send out dedicated ADD_ADDR packet")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In mptcp_pm_nl_add_addr_received(), fill a temporary allocate array of
all local address corresponding to the fullmesh endpoint. If such array
is empty, keep the current behavior.
Elsewhere loop on such array and create a subflow for each local address
towards the given remote address
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added and managed a new per endpoint flag, named
MPTCP_PM_ADDR_FLAG_FULLMESH.
In mptcp_pm_create_subflow_or_signal_addr(), if such flag is set, instead
of:
remote_address((struct sock_common *)sk, &remote);
fill a temporary allocated array of all known remote address. After
releaseing the pm lock loop on such array and create a subflow for each
remote address from the given local.
Note that the we could still use an array even for non 'fullmesh'
endpoint: with a single entry corresponding to the primary MPC subflow
remote address.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new helper mptcp_pm_get_flags_and_ifindex_by_id(),
and used it in __mptcp_subflow_connect() to get the flags and ifindex
values.
Then the two arguments flags and ifindex of __mptcp_subflow_connect()
can be dropped.
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
the parsed incoming backup flag is not propagated
to the subflow itself, the client may end-up using it
to send data.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/191
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows monitoring exceptional events like
active backup scenarios.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The msk can use backup subflows to transmit in-sequence data
only if there are no other active subflow. On active backup
scenario, the MPTCP connection can do forward progress only
due to MPTCP retransmissions - rtx can pick backup subflows.
This patch introduces a new flag flow MPTCP subflows: if the
underlying TCP connection made no progresses for long time,
and there are other less problematic subflows available, the
given subflow become stale.
Stale subflows are not considered active: if all non backup
subflows become stale, the MPTCP scheduler can pick backup
subflows for plain transmissions.
Stale subflows can return in active state, as soon as any reply
from the peer is observed.
Active backup scenarios can now leverage the available b/w
with no restrinction.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/207
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reorder the data in mptcp_pernet to avoid wasting space
with no reasons and constify the access helpers.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PM can close active subflow, e.g. due to ingress RM_ADDR
option. Such subflow could carry data still unacked at the
MPTCP-level, both in the write and the rtx_queue, which has
never reached the other peer.
Currently the mptcp-level retransmission will deliver such data,
but at a very low rate (at most 1 DSM for each MPTCP rtx interval).
We can speed-up the recovery a lot, moving all the unacked in the
tcp write_queue, so that it will be pushed again via other
subflows, at the speed allowed by them.
Also make available the new helper for later patches.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/207
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current mptcp re-inject strategy is very aggressive,
we have mptcp-level retransmissions even on single subflow
connection, if the link in-use is lossy.
Let's be a little more conservative: we do retransmit
only if at least a subflow has write and rtx queue empty.
Additionally use the backup subflows only if the active
subflows are stale - no progresses in at least an rtx period
and ignore stale subflows for rtx timeout update
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/207
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As reported by Maxim, we have a lot of MPTCP-level
retransmissions when multilple links with different latencies
are in use.
This patch refactor the mptcp-level timeout accounting so that
the maximum of all the active subflow timeout is used. To avoid
traversing the subflow list multiple times, the update is
performed inside the packet scheduler.
Additionally clean-up a bit timeout handling.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kfree_rcu() had been removed from pm_netlink.c, so this rcu field in
struct mptcp_pm_addr_entry became useless. Let's drop it.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20210802231914.54709-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It has 'if (err >0 )' statement in nlmsg_unicast(), so use nlmsg_unicast()
instead of netlink_unicast(), this looks more concise.
v2: remove the change in netfilter.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 879526030c ("mptcp: protect the rx path with
the msk socket spinlock") the rmem currently used by a given
msk is really sk_rmem_alloc - rmem_released.
The safety check in mptcp_data_ready() does not take the above
in due account, as a result legit incoming data is kept in
subflow receive queue with no reason, delaying or blocking
MPTCP-level ack generation.
This change addresses the issue introducing a new helper to fetch
the rmem memory and using it as needed. Additionally add a MIB
counter for the exceptional event described above - the peer is
misbehaving.
Finally, introduce the required annotation when rmem_released is
updated.
Fixes: 879526030c ("mptcp: protect the rx path with the msk socket spinlock")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/211
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If check_fully_established() causes a subflow reset, it should not
continue to process the packet in tcp_data_queue().
Add a return value to mptcp_incoming_options(), and return false if a
subflow has been reset, else return true. Then drop the packet in
tcp_data_queue()/tcp_rcv_state_process() if mptcp_incoming_options()
return false.
Fixes: d582484726 ("mptcp: fix fallback for MP_JOIN subflows")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lots of "TCP: tcp_fin: Impossible, sk->sk_state=7" in client side
when doing stress testing using wrk and webfsd.
There are at least two cases may trigger this warning:
1.mptcp is in syncookie, and server recv MP_JOIN SYN request,
in subflow_check_req(), the mptcp_can_accept_new_subflow()
return false, so subflow_init_req_cookie_join_save() isn't
called, i.e. not store the data present in the MP_JOIN syn
request and the random nonce in hash table - join_entries[],
but still send synack. When recv 3rd-ack,
mptcp_token_join_cookie_init_state() will return false, and
3rd-ack is dropped, then if mptcp conn is closed by client,
client will send a DATA_FIN and a MPTCP FIN, the DATA_FIN
doesn't have MP_CAPABLE or MP_JOIN,
so mptcp_subflow_init_cookie_req() will return 0, and pass
the cookie check, MP_JOIN request is fallback to normal TCP.
Server will send a TCP FIN if closed, in client side,
when process TCP FIN, it will do reset, the code path is:
tcp_data_queue()->mptcp_incoming_options()
->check_fully_established()->mptcp_subflow_reset().
mptcp_subflow_reset() will set sock state to TCP_CLOSE,
so tcp_fin will hit TCP_CLOSE, and print the warning.
2.mptcp is in syncookie, and server recv 3rd-ack, in
mptcp_subflow_init_cookie_req(), mptcp_can_accept_new_subflow()
return false, and subflow_req->mp_join is not set to 1,
so in subflow_syn_recv_sock() will not reset the MP_JOIN
subflow, but fallback to normal TCP, and then the same thing
happens when server will send a TCP FIN if closed.
For case1, subflow_check_req() return -EPERM,
then tcp_conn_request() will drop MP_JOIN SYN.
For case2, let subflow_syn_recv_sock() call
mptcp_can_accept_new_subflow(), and do fatal fallback, send reset.
Fixes: 9466a1cceb ("mptcp: enable JOIN requests even if cookies are in use")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In subflow_check_req(), if subflow sport is mismatch, will put msk,
destroy token, and destruct req, then return -EPERM, which can be
done by subflow_req_destructor() via:
tcp_conn_request()
|--__reqsk_free()
|--subflow_req_destructor()
So we should remove these redundant code, otherwise will call
tcp_v4_reqsk_destructor() twice, and may double free
inet_rsk(req)->ireq_opt.
Fixes: 5bc56388c7 ("mptcp: add port number check for MP_JOIN")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since PTP virtual clock support is added, there can be
several PTP virtual clocks based on one PTP physical
clock for timestamping.
This patch is to extend SO_TIMESTAMPING API to support
PHC (PTP Hardware Clock) binding by adding a new flag
SOF_TIMESTAMPING_BIND_PHC. When PTP virtual clocks are
in use, user space can configure to bind one for
timestamping, but PTP physical clock is not supported
and not needed to bind.
This patch is preparation for timestamp conversion from
raw timestamp to a specific PTP virtual clock time in
core net.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split timestamping handling into a new function
mptcp_setsockopt_sol_socket_timestamping().
This is preparation for extending SO_TIMESTAMPING
for PHC binding, since optval will no longer be
integer.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trivial conflict in net/netfilter/nf_tables_api.c.
Duplicate fix in tools/testing/selftests/net/devlink_port_split.py
- take the net-next version.
skmsg, and L4 bpf - keep the bpf code but remove the flags
and err params.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch introduces a function wrapper to call the sk_error_report
callback. That will prepare to add additional handling whenever
sk_error_report is called, for example to trace socket errors.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter reported an issue introduced in
commit fde56eea01 ("mptcp: refine mptcp_cleanup_rbuf") where a new
boolean (ack_pending) is masked with 0x9.
This is not the intention to ignore values by using a boolean. This
variable should not have a 'bool' type: we should keep the 'u8' to allow
this comparison.
Fixes: fde56eea01 ("mptcp: refine mptcp_cleanup_rbuf")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current cleanup rbuf tries a bit too hard to avoid acquiring
the subflow socket lock. We may end-up delaying the needed ack,
or skip acking a blocked subflow.
Address the above extending the conditions used to trigger the cleanup
to reflect more closely what TCP does and invoking tcp_cleanup_rbuf()
on all the active subflows.
Note that we can't replicate the exact tests implemented in
tcp_cleanup_rbuf(), as MPTCP lacks some of the required info - e.g.
ping-pong mode.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new flag named deny_join_id0 in struct
mptcp_options_received. Set it when MP_CAPABLE with the flag
MPTCP_CAP_DENYJOIN_ID0 is received.
Also add a new flag remote_deny_join_id0 in struct mptcp_pm_data. When the
flag deny_join_id0 is set, set this remote_deny_join_id0 flag.
In mptcp_pm_create_subflow_or_signal_addr, if the remote_deny_join_id0 flag
is set, and the remote address id is zero, stop this connection.
Suggested-by: Florian Westphal <fw@strlen.de>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch defined a new flag MPTCP_CAP_DENY_JOIN_ID0 for the third bit,
labeled "C" of the MP_CAPABLE option.
Add a new flag allow_join_id0 in struct mptcp_out_options. If this flag is
set, send out the MP_CAPABLE option with the flag MPTCP_CAP_DENY_JOIN_ID0.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new sysctl, named allow_join_initial_addr_port, to
control whether allow peers to send join requests to the IP address and
port number used by the initial subflow.
Suggested-by: Florian Westphal <fw@strlen.de>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 7896248983 ("mptcp: add skeleton to sync msk socket
options to subflows") introduced a duplicate declaration of
mptcp_setsockopt(), just drop it.
Reported-by: Florian Westphal <fw@strlen.de>
Fixes: 7896248983 ("mptcp: add skeleton to sync msk socket options to subflows")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The msk socket state is currently updated in a few spots without
owning the msk socket lock itself.
Some of such operations are safe, as they happens before exposing
the msk socket to user-space and can't race with other changes.
A couple of them, at connect time, can actually race with close()
or shutdown(), leaving breaking the socket state machine.
This change addresses the issue moving such update under the msk
socket lock with the usual:
<acquire spinlock>
<check sk lock onwers>
<ev defer to release_cb>
scheme.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/56
Fixes: 8fd738049a ("mptcp: fallback in case of simultaneous connect")
Fixes: c3c123d16c ("net: mptcp: don't hang in mptcp_sendmsg() after TCP fallback")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Account this exceptional events for better introspection.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we check the msk state to avoid enqueuing new
skbs at msk shutdown time.
Such test is racy - as we can't acquire the msk socket lock -
and useless, as the caller already checked the subflow
field 'disposable', covering the same scenario in a race
free manner - read and updated under the ssk socket lock.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we don't flush entirely the receive queue, we need set
again such bit later. We can simply avoid clearing it.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a bunch of callsite where the ssk socket
lock is acquired using the full-blown version eligible for
the fast variant. Let's move to the latter.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mentioned cache was introduced to reduce the number of skb
allocation in atomic context, but the required complexity is
excessive.
This change remove the mentioned cache.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current implementation of 32 bit DSN expansion is buggy.
After the previous patch, we can simply reuse the newly
introduced helper to do the expansion safely.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/120
Fixes: 648ef4b886 ("mptcp: Implement MPTCP receive path")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When receiving 32 bits DSS ack from the peer, the MPTCP need
to expand them to 64 bits value. The current code is buggy
WRT detecting 32 bits ack wrap-around: when the wrap-around
happens the current unsigned 32 bit ack value is lower than
the previous one.
Additionally check for possible reverse wrap and make the helper
visible, so that we could re-use it for the next patch.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/204
Fixes: cc9d256698 ("mptcp: update per unacked sequence on pkt reception")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trivial conflicts in net/can/isotp.c and
tools/testing/selftests/net/mptcp/mptcp_connect.sh
scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c
to include/linux/ptp_clock_kernel.h in -next so re-apply
the fix there.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added a new sysctl, named checksum_enabled, to control
whether DSS checksum can be enabled.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added the mib for the data checksum, MPTCP_MIB_DATACSUMERR.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the MPTCP-level checksum is enabled, on re-injections we
must spool a complete DSS, or the receive side will not be
able to compute the csum and process any data.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added three new members named data_csum, csum_len and
map_csum in struct mptcp_subflow_context, implemented a new function
named mptcp_validate_data_checksum().
If the current mapping is valid and csum is enabled traverse the later
pending skbs and compute csum incrementally till the whole mapping has
been covered. If not enough data is available in the rx queue, return
MAPPING_EMPTY - that is, no data.
Next subflow_data_ready invocation will trigger again csum computation.
When the full DSS is available, validate the csum and return to the
caller an appropriate error code, to trigger subflow reset of fallback
as required by the RFC.
Additionally:
- if the csum prevence in the DSS don't match the negotiated value e.g.
csum present, but not requested, return invalid mapping to trigger
subflow reset.
- keep some csum state, to avoid re-compute the csum on the same data
when multiple rx queue traversal are required.
- clean-up the uncompleted mapping from the receive queue on close, to
allow proper subflow disposal
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In mptcp_parse_option, adjust the expected_opsize, and always parse the
data checksum value from the receiving DSS regardless of csum presence.
Then save it in mp_opt->csum.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new member named csum in struct mptcp_options_received.
When parsing the MP_CAPABLE with data, if the checksum is enabled,
adjust the expected_opsize. If the receiving option length matches the
length with the data checksum, get the checksum value and save it in
mp_opt->csum. And in mptcp_incoming_options, pass it to mpext->csum.
We always parse any csum/nocsum combination and delay the presence check
to later code, to allow reset if missing.
Additionally, in the TX path, use the newly introduce ext field to avoid
MPTCP csum recomputation on TCP retransmission and unneeded csum update
on when setting the data fin_flag.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new flag csum_reqd in struct mptcp_options_received, if
the flag MPTCP_CAP_CHECKSUM_REQD is set in the receiving MP_CAPABLE
suboption, set this flag.
In mptcp_sk_clone and subflow_finish_connect, if the csum_reqd flag is set,
enable the msk->csum_enabled flag.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new parameter name sk in mptcp_get_options().
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In mptcp_write_options, if the checksum is enabled, adjust the option
length and send out the data checksum with DSS suboption.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the checksum is enabled, send out the data checksum with the
MP_CAPABLE suboption with data.
In mptcp_established_options_mp, save the data checksum in
opts->ext_copy.csum. In mptcp_write_options, adjust the option length and
send it out with the MP_CAPABLE suboption.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new member csum_reqd in struct mptcp_out_options and
struct mptcp_subflow_request_sock. Initialized it with the helper
function mptcp_is_checksum_enabled().
In mptcp_write_options, if this field is enabled, send out the MP_CAPABLE
suboption with the MPTCP_CAP_CHECKSUM_REQD flag.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new member named csum in struct mptcp_ext, implemented
a new function named mptcp_generate_data_checksum().
Generate the data checksum in mptcp_sendmsg_frag, save it in mpext->csum.
Note that we must generate the csum for zero window probe, too.
Do the csum update incrementally, to avoid multiple csum computation
when the data is appended to existing skb.
Note that in a later patch we will skip unneeded csum related operation.
Changes not included here to keep the delta small.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new member named csum_enabled in struct mptcp_sock,
used a dummy mptcp_is_checksum_enabled() helper to initialize it.
Also added a new member named mptcpi_csum_enabled in struct mptcp_info
to expose the csum_enabled flag.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
warn_bad_map() produces a kernel WARN on bad input coming
from the network. Use pr_debug() to avoid spamming the system
log.
Additionally, when the right bound check fails, warn_bad_map() reports
the wrong ssn value, let's fix it.
Fixes: 648ef4b886 ("mptcp: Implement MPTCP receive path")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/107
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we rely on the subflow->data_avail field, which is subject to
races:
ssk1
skb len = 500 DSS(seq=1, len=1000, off=0)
# data_avail == MPTCP_SUBFLOW_DATA_AVAIL
ssk2
skb len = 500 DSS(seq = 501, len=1000)
# data_avail == MPTCP_SUBFLOW_DATA_AVAIL
ssk1
skb len = 500 DSS(seq = 1, len=1000, off =500)
# still data_avail == MPTCP_SUBFLOW_DATA_AVAIL,
# as the skb is covered by a pre-existing map,
# which was in-sequence at reception time.
Instead we can explicitly check if some has been received in-sequence,
propagating the info from __mptcp_move_skbs_from_subflow().
Additionally add the 'ONCE' annotation to the 'data_avail' memory
access, as msk will read it outside the subflow socket lock.
Fixes: 648ef4b886 ("mptcp: Implement MPTCP receive path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the host is under sever memory pressure, and RX forward
memory allocation for the msk fails, we try to borrow the
required memory from the ingress subflow.
The current attempt is a bit flaky: if skb->truesize is less
than SK_MEM_QUANTUM, the ssk will not release any memory, and
the next schedule will fail again.
Instead, directly move the required amount of pages from the
ssk to the msk, if available
Fixes: 9c3f94e168 ("mptcp: add missing memory scheduling in the rx path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TCP option parser in mptcp (mptcp_get_options) could read one byte
out of bounds. When the length is 1, the execution flow gets into the
loop, reads one byte of the opcode, and if the opcode is neither
TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the
length of 1.
This fix is inspired by commit 9609dad263 ("ipv4: tcp_input: fix stack
out of bounds when parsing TCP options.").
Cc: Young Xiao <92siuyang@gmail.com>
Fixes: cec37a6e41 ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for SO_TIMESTAMP(NS). Timestamps are passed to
userspace in the same way as for plain tcp sockets.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the pre-check to the function that handles all SOL_SOCKET values.
At this point there is complete coverage for all values that were
accepted by the pre-check.
BUSYPOLL functions are accepted but will not have any functionality
yet until its clear how the expected mptcp behaviour should look like.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for TIMESTAMP(NS) setsockopt.
This doesn't make things work yet, because the mptcp receive path
doesn't convert the skb timestamps to cmsgs for userspace consumption.
receive path cmsg support is added ina followup patch.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To avoid confusions, it seems better to parse this sysctl parameter as a
boolean. We use it as a boolean, no need to parse an integer and bring
confusions if we see a value different from 0 and 1, especially with
this parameter name: enabled.
It seems fine to do this modification because the default value is 1
(enabled). Then the only other interesting value to set is 0 (disabled).
All other values would not have changed the default behaviour.
Suggested-by: Florian Westphal <fw@strlen.de>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the introduction of the sysctl support in MPTCP with
commit 784325e9f0 ("mptcp: new sysctl to control the activation per NS"),
we don't check CONFIG_SYSCTL.
Until now, that was not an issue: the register and unregister functions
were replaced by NO-OP one if SYSCTL was not enabled in the config. The
only thing we could have avoid is not to reserve memory for the table
but that's for the moment only a small table per net-ns.
But the following commit is going to use SYSCTL_ZERO and SYSCTL_ONE
which are not be defined if SYSCTL is not enabled in the config. This
causes 'undefined reference' errors from the linker.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When add address with port, it is mean to create a listening socket,
and send an ADD_ADDR to remote, so it must have flag signal set,
add this check in mptcp_pm_parse_addr().
Fixes: a77e9179c7 ("mptcp: deal with MPTCP_PM_ADDR_ATTR_PORT in PM netlink")
Acked-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Memory of struct pm_nl_pernet{} is allocated by kzalloc()
in setup_net()->ops_init(), so it's no need to reset counters
and zero bitmap in pm_nl_init_net().
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For outgoing subflow join, when recv SYNACK, in subflow_finish_connect(),
the mptcp_finish_join() may return false in some cases, and send a RESET
to remote, and no local hmac is required.
So generate subflow hmac after mptcp_finish_join().
Fixes: ec3edaa7ca ("mptcp: Add handling of outgoing MP_JOIN requests")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have macro TOKEN_MAX_RETRIES for the number of token generate retries,
so using TOKEN_MAX_RETRIES in subflow_check_req().
And rename TOKEN_MAX_RETRIES to MPTCP_TOKEN_MAX_RETRIES as it is now
exposed.
Fixes: 535fb8152f ("mptcp: token: move retry to caller")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 2c5ebd001d ("mptcp: refactor token container"),
pr_debug() is called before mptcp_crypto_key_gen_sha() in
mptcp_token_new_connect(), so the output local_key, token and
idsn are 0, like:
MPTCP: ssk=00000000f6b3c4a2, local_key=0, token=0, idsn=0
Move pr_debug() after mptcp_crypto_key_gen_sha().
Fixes: 2c5ebd001d ("mptcp: refactor token container")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When some mapping related errors occurs we close the main
MPC subflow with a RST. We should instead fallback gracefully
to TCP, and do the reset only for MPJ subflows.
Fixes: d22f4988ff ("mptcp: process MP_CAPABLE data option")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/192
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In subflow_syn_recv_sock() we currently skip options parsing
for OoO packet, given that such packets may not carry the relevant
MPC option.
If the peer generates an MPC+data TSO packet and some of the early
segments are lost or get reorder, we server will ignore the peer key,
causing transient, unexpected fallback to TCP.
The solution is always parsing the incoming MPTCP options, and
do the fallback only for in-order packets. This actually cleans
the existing code a bit.
Fixes: d22f4988ff ("mptcp: process MP_CAPABLE data option")
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MPTCP sk_forward_memory handling is a bit special, as such field
is protected by the msk socket spin_lock, instead of the plain
socket lock.
Currently we have a code path updating such field without handling
the relevant lock:
__mptcp_retrans() -> __mptcp_clean_una_wakeup()
Several helpers in __mptcp_clean_una_wakeup() will update
sk_forward_alloc, possibly causing such field corruption, as reported
by Matthieu.
Address the issue providing and using a new variant of blamed function
which explicitly acquires the msk spin lock.
Fixes: 64b9cea7a0 ("mptcp: fix spurious retransmissions")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/172
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
when Linux receives an echo-ed ADD_ADDR, it checks the IP address against
the list of "announced" addresses. In case of a positive match, the timer
that handles retransmissions is stopped regardless of the 'Address Id' in
the received packet: this behaviour does not comply with RFC8684 3.4.1.
Fix it by validating the 'Address Id' in received echo-ed ADD_ADDRs.
Tested using packetdrill, with the following captured output:
unpatched kernel:
Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0xfd2e62517888fe29,mptcp dss ack 3007449509], length 0
In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 1.2.3.4,mptcp dss ack 3013740213], length 0
Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0xfd2e62517888fe29,mptcp dss ack 3007449509], length 0
In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 90 198.51.100.2,mptcp dss ack 3013740213], length 0
^^^ retransmission is stopped here, but 'Address Id' is 90
patched kernel:
Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 1.2.3.4,mptcp dss ack 1672384568], length 0
Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 90 198.51.100.2,mptcp dss ack 1672384568], length 0
Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 198.51.100.2,mptcp dss ack 1672384568], length 0
^^^ retransmission is stopped here, only when both 'Address Id' and 'IP Address' match
Fixes: 00cfd77b90 ("mptcp: retransmit ADD_ADDR when timeout")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Another left-over. Avoid flooding dmesg with useless text,
we already have a MIB for that event.
Fixes: 648ef4b886 ("mptcp: Implement MPTCP receive path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a left-over of early day. A malicious peer can flood
the kernel logs with useless messages, just drop it.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can't use tcp_set_congestion_control() on an mptcp socket, as
such function can end-up accessing a tcp-specific field -
prior_ssthresh - causing an OOB access.
To allow propagating the correct ca algo on subflow, cache the ca
name at initialization time.
Additionally avoid overriding the user-selected CA (if any) at
clone time.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/182
Fixes: aa1fbd94e5 ("mptcp: sockopt: add TCP_CONGESTION and TCP_INFO")
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxim reported several issues when forcing a TCP transparent proxy
to use the MPTCP protocol for the inbound connections. He also
provided a clean reproducer.
The problem boils down to 'mptcp_frag_can_collapse_to()' assuming
that only MPTCP will use the given page_frag.
If others - e.g. the plain TCP protocol - allocate page fragments,
we can end-up re-using already allocated memory for mptcp_data_frag.
Fix the issue ensuring that the to-be-expanded data fragment is
located at the current page frag end.
v1 -> v2:
- added missing fixes tag (Mat)
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/178
Reported-and-tested-by: Maxim Galaganov <max@internet.ru>
Fixes: 18b683bff8 ("mptcp: queue data for mptcp level retransmission")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If userspace exits before calling accept() on a listener that had at least
one new connection ready, we get:
Attempt to release TCP socket in state 8
This happens because the mptcp socket gets cloned when the TCP connection
is ready, but the socket is never exposed to userspace.
The client additionally sends a DATA_FIN, which brings connection into
CLOSE_WAIT state. This in turn prevents the orphan+state reset fixup
in mptcp_sock_destruct() from doing its job.
Fixes: 3721b9b646 ("mptcp: Track received DATA_FIN sequence number and add related helpers")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/185
Tested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20210507001638.225468-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds support for MSG_PEEK flag. Packets are not removed
from the receive_queue if MSG_PEEK set in recv() system call.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently mptcp_sendmsg() fails with EOPNOTSUPP if the
user-space provides some unsupported flag. That is unexpected
and may foul existing applications migrated to MPTCP, which
expect a different behavior.
Change the mentioned function to silently ignore the unsupported
flags except MSG_FASTOPEN. This is the only flags currently not
supported by MPTCP with user-space visible side-effects.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/162
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mentioned flag is currently silenlty ignored. This
change implements the TCP-like behaviour, dropping the
pending data up to the specified length.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sigend-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_recvmsg() currently silently ignores MSG_ERRQUEUE, returning
input data instead of error cmsg.
This change provides a dummy implementation for MSG_ERRQUEUE - always
returns no data. That is consistent with the current lack of a suitable
IP_RECVERR setsockopt() support.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With this change, the MPTCP-level retransmission timer is used to resend
DATA_FIN. The retranmit timer is not stopped while waiting for a
MPTCP-level ACK of DATA_FIN, and retransmitted DATA_FINs are sent on all
subflows. The retry interval starts at TCP_RTO_MIN and then doubles on
each attempt, up to TCP_RTO_MAX.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/146
Fixes: 43b54c6ee3 ("mptcp: Use full MPTCP-level disconnect state machine")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch used the macro helper mptcp_for_each_subflow() instead of
list_for_each_entry() in mptcp_close.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a tracepoint in subflow_check_data_avail() to show the
mapping status.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a tracepoint in ack_update_msk() to track the
incoming data_ack and window/snd_una updates.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a tracepoint in the mapping status function
get_mapping_status() to dump every mpext field.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a tracepoint in the packet scheduler function
mptcp_subflow_get_send().
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moved the static function mptcp_subflow_active to protocol.h
as an inline one.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some of the sequence numbers are printed as the negative ones in the debug
log:
[ 46.250932] MPTCP: DSS
[ 46.250940] MPTCP: data_fin=0 dsn64=0 use_map=0 ack64=1 use_ack=1
[ 46.250948] MPTCP: data_ack=2344892449471675613
[ 46.251012] MPTCP: msk=000000006e157e3f status=10
[ 46.251023] MPTCP: msk=000000006e157e3f snd_data_fin_enable=0 pending=0 snd_nxt=2344892449471700189 write_seq=2344892449471700189
[ 46.251343] MPTCP: msk=00000000ec44a129 ssk=00000000f7abd481 sending dfrag at seq=-1658937016627538668 len=100 already sent=0
[ 46.251360] MPTCP: data_seq=16787807057082012948 subflow_seq=1 data_len=100 dsn64=1
This patch used the format specifier %u instead of %d for the unsigned int
values to fix it.
Fixes: d9ca1de8c0 ("mptcp: move page frag allocation in mptcp_sendmsg()")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop 'S' from end of CONFIG_MPTCP_KUNIT_TESTS in order to adhere to the
KUNIT *_KUNIT_TEST config name format.
Fixes: a00a582203 (mptcp: move crypto test to KUNIT)
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Nico Pache <npache@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP_CONGESTION is set for all subflows.
The mptcp socket gains icsk_ca_ops too so it can be used to keep the
authoritative state that should be set on new/future subflows.
TCP_INFO will return first subflow only.
The out-of-tree kernel has a MPTCP_INFO getsockopt, this could be added
later on.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle SO_DEBUG and set it on all subflows.
Ignore those values not implemented on TCP sockets.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replicate to all subflows.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Value is synced to all subflows.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to PRIORITY/KEEPALIVE: needs to be mirrored to all subflows.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to previous patch: needs to be mirrored to all subflows.
Device bind is simpler: it is only done on the initial (listener) sk.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
start with something simple: both take an integer value, both
need to be mirrored to all subflows.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni suggested to avoid re-syncing new subflows because
they inherit options from listener. In case options were set on
listener but are not set on mptcp-socket there is no need to
do any synchronisation for new subflows.
This change sets sockopt_seq of new mptcp sockets to the seq of
the mptcp listener sock.
Subflow sequence is set to the embedded tcp listener sk.
Add a comment explaing why sk_state is involved in sockopt_seq
generation.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle following cases:
1. setsockopt is called with multiple subflows.
Change might have to be mirrored to all of them.
This is done directly in process context/setsockopt call.
2. Outgoing subflow is created after one or several setsockopt()
calls have been made. Old setsockopt changes should be
synced to the new socket.
3. Incoming subflow, after setsockopt call(s).
Cases 2 and 3 are handled right after the join list is spliced to the conn
list.
Not all sockopt values can be just be copied by value, some require
helper calls. Those can acquire socket lock (which can sleep).
If the join->conn list splicing is done from preemptible context,
synchronization can be done right away, otherwise its deferred to work
queue.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unrolling mcast state at msk dismantel time is bug prone, as
syzkaller reported:
======================================================
WARNING: possible circular locking dependency detected
5.11.0-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor905/8822 is trying to acquire lock:
ffffffff8d678fe8 (rtnl_mutex){+.+.}-{3:3}, at: ipv6_sock_mc_close+0xd7/0x110 net/ipv6/mcast.c:323
but task is already holding lock:
ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1600 [inline]
ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: mptcp6_release+0x57/0x130 net/mptcp/protocol.c:3507
which lock already depends on the new lock.
Instead we can simply forbid any mcast-related setsockopt.
Let's do the same with all other non supported sockopts.
Fixes: 717e79c867 ("mptcp: Add setsockopt()/getsockopt() socket operations")
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MPTCP sockopt implementation is going to be much
more big and complex soon. Let's move it to a different
source file.
No functional change intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change reverts commit 86581852d7 ("mptcp: forbit mcast-related sockopt on MPTCP sockets").
As announced in the cover letter of the mentioned patch above, the
following commits introduce a larger MPTCP sockopt implementation
refactor.
This time, we switch from a blocklist to an allowlist. This is safer for
the future where new sockoptions could be added while not being fully
supported with MPTCP sockets and thus causing unstabilities.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current Linux carries echo-ed ADD_ADDR over pure TCP ACKs, so there is no
need to add a DSS element that would fit only ADD_ADDR with IPv4 address.
Drop the DSS from echo-ed ADD_ADDR, regardless of the IP version.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The length of the IPv4 address is 4 octets and IPv6 is 16. That's the only
difference between add_addr_generate_hmac and add_addr6_generate_hmac.
This patch dropped the duplicate code and unify them into one.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the type of the address family in struct mptcp_options_received
became sa_family_t, we should set AF_INET/AF_INET6 to it, instead of
using MPTCP_ADDR_IPVERSION_4/6.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new struct mptcp_addr_info member addr in struct
mptcp_options_received, and dropped the original family, addr_id, addr,
addr6 and port fields in it. Then we can pass the parameter mp_opt.addr
directly to mptcp_pm_add_addr_received and mptcp_pm_add_addr_echoed.
Since the port number became big-endian now, use htons to convert the
incoming port number to it. Also use ntohs to convert it when passing
it to add_addr_generate_hmac or printing it out.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the family field was added in struct mptcp_out_options, no need to
use OPTION_MPTCP_ADD_ADDR6 to identify the IPv6 address. Drop it.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moved the mptcp_addr_info struct from protocol.h to mptcp.h,
added a new struct mptcp_addr_info member addr in struct mptcp_out_options,
and dropped the original addr, addr6, addr_id and port fields in it. Then
we can use opts->addr to get the adding address from PM directly using
mptcp_pm_add_addr_signal.
Since the port number became big-endian now, use ntohs to convert it
before sending it out with the ADD_ADDR suboption. Also convert it
when passing it to add_addr_generate_hmac or printing it out.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moved the flags and ifindex fields from struct mptcp_addr_info
to struct mptcp_pm_addr_entry. Add the flags and ifindex values as two new
parameters to __mptcp_subflow_connect.
In mptcp_pm_create_subflow_or_signal_addr, pass the local address entry's
flags and ifindex fields to __mptcp_subflow_connect.
In mptcp_pm_nl_add_addr_received, just pass two zeros to it.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MPTCP reset option allows to carry a mptcp-specific error code that
provides more information on the nature of a connection reset.
Reset option data received gets stored in the subflow context so it can
be sent to userspace via the 'subflow closed' netlink event.
When a subflow is closed, the desired error code that should be sent to
the peer is also placed in the subflow context structure.
If a reset is sent before subflow establishment could complete, e.g. on
HMAC failure during an MP_JOIN operation, the mptcp skb extension is
used to store the reset information.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we explicitly check for the first subflow being
NULL in a couple of places, even if we don't need any
special actions in such scenario.
Just drop the unneeded checks, to avoid confusion.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We are not currently tracking the active MPTCP connection
attempts. Let's add the related counters.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the MPTCP protocol is unable to create a new token,
the socket fallback to plain TCP, let's keep track
of such events via a specific MIB.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change reverts commit ad98dd3705 ("mptcp: provide subflow aware
release function"). The latter introduced a deadlock spotted by
syzkaller and is not needed anymore after the previous commit.
Fixes: ad98dd3705 ("mptcp: provide subflow aware release function")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unrolling mcast state at msk dismantel time is bug prone, as
syzkaller reported:
======================================================
WARNING: possible circular locking dependency detected
5.11.0-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor905/8822 is trying to acquire lock:
ffffffff8d678fe8 (rtnl_mutex){+.+.}-{3:3}, at: ipv6_sock_mc_close+0xd7/0x110 net/ipv6/mcast.c:323
but task is already holding lock:
ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1600 [inline]
ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: mptcp6_release+0x57/0x130 net/mptcp/protocol.c:3507
which lock already depends on the new lock.
Instead we can simply forbit any mcast-related setsockopt
Fixes: 717e79c867 ("mptcp: Add setsockopt()/getsockopt() socket operations")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new function mptcp_nl_remove_id_zero_address to
remove the id 0 address.
In this function, traverse all the existing msk sockets to find the
msk matched the input IP address. Then fill the removing list with
id 0, and pass it to mptcp_pm_remove_addr and mptcp_pm_remove_subflow.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are some duplicate code in mptcp_pm_nl_rm_addr_received and
mptcp_pm_nl_rm_subflow_received. This patch unifies them into a new
function named mptcp_pm_nl_rm_addr_or_subflow. In it, use the input
parameter rm_type to identify it's now removing an address or a subflow.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's only one subflow involving the non-zero id address, but there
may be multi subflows involving the id 0 address.
Here's an example:
local_id=0, remote_id=0
local_id=1, remote_id=0
local_id=0, remote_id=1
If the removing address id is 0, all the subflows involving the id 0
address need to be removed.
In mptcp_pm_nl_rm_addr_received/mptcp_pm_nl_rm_subflow_received, the
"break" prevents the iteration to the next subflow, so this patch
dropped them.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since mptcp_pm_nl_add_addr_send_ack is now used for both ADD_ADDR and
RM_ADDR cases, rename it to mptcp_pm_nl_addr_send_ack.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch changes the sending ACK conditions for the ADD_ADDR, send an
ACK packet for RM_ADDR too.
In mptcp_pm_remove_addr, invoke mptcp_pm_nl_add_addr_send_ack to send
the ACK packet.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
msk->pm.addr_signal is cleared in mptcp_pm_add_addr_signal, no need to
clear it in mptcp_pm_nl_add_addr_send_ack again. Drop it.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an invalid address was announced, the subflow couldn't be created
for this address. Therefore mptcp_pm_nl_subflow_established couldn't be
invoked. Then the next addresses in the local address list didn't have a
chance to be announced.
This patch invokes the new function mptcp_pm_add_addr_echoed when the
address is echoed. In it, use mptcp_lookup_anno_list_by_saddr to check
whether this address is in the anno_list. If it is, PM schedules the
status MPTCP_PM_SUBFLOW_ESTABLISHED to invoke
mptcp_pm_create_subflow_or_signal_addr to deal with the next address in
the local address list.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch exported the static function lookup_anno_list_by_saddr, and
renamed it to mptcp_lookup_anno_list_by_saddr.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch called mptcp_pm_subflow_established to move to the next address
when an ADD_ADDR has been retransmitted the maximum number of times.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch drops the unused parameter subflow in
mptcp_pm_subflow_established().
Fixes: 926bdeab55 ("mptcp: Implement path manager interface commands")
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new helper named lookup_subflow_by_daddr to find
whether the destination address is in the msk's conn_list.
In mptcp_pm_nl_add_addr_received, use lookup_subflow_by_daddr to check
whether the announced address is already connected. If it is, skip
connecting this address and send out the echo.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop the redundant argument 'port' from mptcp_pm_announce_addr, use the
port field of another argument 'addr' instead.
Fixes: 0f5c9e3f07 ("mptcp: add port parameter for mptcp_pm_announce_addr")
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the previous patch we can easily avoid invoking
the workqueue to perform the retransmission, if the
msk socket lock is held at rtx timer expiration.
This also simplifies the relevant code.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 6af1799aaf.
Commit 6af1799aaf ("ipv6: drop incoming packets having a v4mapped
source address") introduced an input check against v4mapped addresses.
Use of such addresses on the wire is indeed questionable and not
allowed on public Internet. As the commit pointed out
https://tools.ietf.org/html/draft-itojun-v6ops-v4mapped-harmful-02
lists potential issues.
Unfortunately there are applications which use v4mapped addresses,
and breaking them is a clear regression. For example v4mapped
addresses (or any semi-valid addresses, really) may be used
for uni-direction event streams or packet export.
Since the issue which sparked the addition of the check was with
TCP and request_socks in particular push the check down to TCPv6
and DCCP. This restores the ability to receive UDPv6 packets with
v4mapped address as the source.
Keep using the IPSTATS_MIB_INHDRERRORS statistic to minimize the
user-visible changes.
Fixes: 6af1799aaf ("ipv6: drop incoming packets having a v4mapped source address")
Reported-by: Sunyi Shao <sunyishao@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, Linux computes the HMAC contained in ADD_ADDR sub-option using
the Address Id and the IP Address, and hardcodes a destination port equal
to zero. This is not ok for ADD_ADDR with port: ensure to account for the
endpoint port when computing the HMAC, in compliance with RFC8684 §3.4.1.
Fixes: 22fb85ffae ("mptcp: add port support for ADD_ADDR suboption writing")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch invoked mptcp_nl_remove_addrs_list to remove a list of addresses
when the netlink flushes addresses, instead of using
mptcp_nl_remove_subflow_and_signal_addr to remove them one by one.
And dropped the unused parameter net in __flush_addrs too.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implemented the function to remove a list of addresses and
subflows, named mptcp_nl_remove_addrs_list, which had a input parameter
rm_list as the removing addresses list.
In mptcp_nl_remove_addrs_list, traverse all the existing msk sockets to
invoke mptcp_pm_remove_addrs_and_subflows to remove a list of addresses
for each msk socket.
In mptcp_pm_remove_addrs_and_subflows, traverse all the addresses in the
removing addresses list, to find whether this address is in the conn_list
or anno_list. If it is, put the address ID into the removing address list
or the removing subflow list, and pass the two lists to
mptcp_pm_remove_addr and mptcp_pm_remove_subflow.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch dealt with removing multi subflows in PM:
In mptcp_pm_remove_subflow, changed the input parameter local_id as an
list of removing address ids, and passed the list to
mptcp_pm_nl_rm_subflow_received.
In mptcp_pm_nl_rm_subflow_received, iterated each address id from the
received ids list. Then shut down and closed each address id's subsocket.
In mptcp_nl_remove_subflow_and_signal_addr, put the single address id into
an ids list, and passed it to mptcp_pm_remove_subflow.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch dropped the member rm_id of struct mptcp_pm_data. Use
rm_list_rx in mptcp_pm_nl_rm_addr_received instead of using rm_id.
In mptcp_pm_nl_rm_addr_received, iterated each address id from
pm.rm_list_rx, then shut down and closed each address id's subsocket.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new member rm_list_rx for struct mptcp_pm_data as an
list of the removing address ids on the incoming direction. Initialized
its nr field to zero in mptcp_pm_data_init.
In mptcp_pm_rm_addr_received, set it as the input rm_list.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch changed the member rm_id in struct mptcp_options_received as a
list of the removing address ids, and renamed it to rm_list.
In mptcp_parse_option, parsed the RM_ADDR suboption and filled them into
the rm_list in struct mptcp_options_received.
In mptcp_incoming_options, passed this rm_list to the function
mptcp_pm_rm_addr_received.
It also changed the parameter type of mptcp_pm_rm_addr_received.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new member rm_list_tx for struct mptcp_pm_data as the
removing address list on the outgoing direction. Initialize its nr field
to zero in mptcp_pm_data_init.
In mptcp_pm_remove_anno_addr, put the single address id into an removing
list, and passed it to mptcp_pm_remove_addr.
In mptcp_pm_remove_addr, save the input rm_list to rm_list_tx in struct
mptcp_pm_data.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch defined a new struct mptcp_rm_list, the ids field was an
array of the removing address ids, the nr field was the valid number of
removing address ids in the array. The array size was definced as a new
macro MPTCP_RM_IDS_MAX. Changed the member rm_id of struct
mptcp_out_options to rm_list.
In mptcp_established_options_rm_addr, invoked mptcp_pm_rm_addr_signal to
get the rm_list. According the number of addresses in it, calculated
the padded RM_ADDR suboption length. And saved the ids array in struct
mptcp_out_options's rm_list member.
In mptcp_write_options, iterated each address id from struct
mptcp_out_options's rm_list member, set the invalid ones as TCPOPT_NOP,
then filled them into the RM_ADDR suboption.
Changed TCPOLEN_MPTCP_RM_ADDR_BASE from 4 to 3.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MPTCP_PUSH_PENDING define is 6 and these tests should be testing if
BIT(6) is set.
Fixes: c2e6048fa1 ("mptcp: fix race in release_cb")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the port number is mismatched with the announced ones, use
'goto dispose_child' to free the resources instead of using 'goto out'.
This patch also moves the port number checking code in
subflow_syn_recv_sock before mptcp_finish_join, otherwise subflow_drop_ctx
will fail in dispose_child.
Fixes: 5bc56388c7 ("mptcp: add port number check for MP_JOIN")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__mptcp_clean_una() can free write memory and should wake-up
user-space processes when needed.
When such function is invoked by the MPTCP receive path, the wakeup
is not needed, as the TCP stack will later trigger subflow_write_space
which will do the wakeup as needed.
Other __mptcp_clean_una() call sites need an additional wakeup check
Let's bundle the relevant code in a new helper and use it.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/165
Fixes: 6e628cd3a8 ("mptcp: use mptcp release_cb for delayed tasks")
Fixes: 64b9cea7a0 ("mptcp: fix spurious retransmissions")
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we receive a MPTCP_PUSH_PENDING even from a subflow when
mptcp_release_cb() is serving the previous one, the latter
will be delayed up to the next release_sock(msk).
Address the issue implementing a test/serve loop for such
event.
Additionally rename the push helper to __mptcp_push_pending()
to be more consistent with the existing code.
Fixes: 6e628cd3a8 ("mptcp: use mptcp release_cb for delayed tasks")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Will simplify the following patch, no functional change
intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just like with last_snd, we have to NULL 'first' on subflow close.
ack_hint isn't strictly required (its never dereferenced), but better to
clear this explicitly as well instead of making it an exception.
msk->first is dereferenced unconditionally at accept time, but
at that point the ssk is not on the conn_list yet -- this means
worker can't see it when iterating the conn_list.
Reported-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Paasch reported following crash:
dst_release underflow
WARNING: CPU: 0 PID: 1319 at net/core/dst.c:175 dst_release+0xc1/0xd0 net/core/dst.c:175
CPU: 0 PID: 1319 Comm: syz-executor217 Not tainted 5.11.0-rc6af8e85128b4d0d24083c5cac646e891227052e0c #70
Call Trace:
rt_cache_route+0x12e/0x140 net/ipv4/route.c:1503
rt_set_nexthop.constprop.0+0x1fc/0x590 net/ipv4/route.c:1612
__mkroute_output net/ipv4/route.c:2484 [inline]
...
The worker leaves msk->subflow alone even when it
happened to close the subflow ssk associated with it.
Fixes: 866f26f2a9 ("mptcp: always graft subflow socket to parent")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/157
Reported-by: Christoph Paasch <cpaasch@apple.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_add_pending_subflow() performs a sock_hold() on the subflow,
then adds the subflow to the join list.
Without a sock_put the subflow sk won't be freed in case connect() fails.
unreferenced object 0xffff88810c03b100 (size 3000):
[..]
sk_prot_alloc.isra.0+0x2f/0x110
sk_alloc+0x5d/0xc20
inet6_create+0x2b7/0xd30
__sock_create+0x17f/0x410
mptcp_subflow_create_socket+0xff/0x9c0
__mptcp_subflow_connect+0x1da/0xaf0
mptcp_pm_nl_work+0x6e0/0x1120
mptcp_worker+0x508/0x9a0
Fixes: 5b950ff433 ("mptcp: link MPC subflow into msk only after accept")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Send logic caches last active subflow in the msk, so it needs to be
cleared when the cached subflow is closed.
Fixes: d5f49190de ("mptcp: allow picking different xmit subflows")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/155
Reported-by: Christoph Paasch <cpaasch@apple.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MPJ subflows are not exposed as fds to user spaces. As such,
incoming MPJ subflows are removed from the accept queue by
tcp_check_req()/tcp_get_cookie_sock().
Later tcp_child_process() invokes subflow_data_ready() on the
parent socket regardless of the subflow kind, leading to poll
wakeups even if the later accept will block.
Address the issue by double-checking the queue state before
waking the user-space.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/164
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp re-used inet(6)_release, so the subflow sockets are ignored.
Need to invoke ip(v6)_mc_drop_socket function to ensure mcast join
resources get free'd.
Fixes: 717e79c867 ("mptcp: Add setsockopt()/getsockopt() socket operations")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/110
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the msk is closed before sending or receiving any data,
no DATA_FIN is generated, instead an MPC ack packet is
crafted out.
In the above scenario, the MPTCP protocol creates and sends a
pure ack and such packets matches also the criteria for an
MPC ack and the protocol tries first to insert MPC options,
leading to the described error.
This change addresses the issue by avoiding the insertion of an
MPC option for DATA_FIN packets or if the sub-flow is not
established.
To avoid doing multiple times the same test, fetch the data_fin
flag in a bool variable and pass it to both the interested
helpers.
Fixes: 6d0060f600 ("mptcp: Write MPTCP DSS headers to outgoing data packets")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently we move orphaned msk sockets directly from FIN_WAIT2
state to CLOSE, with the rationale that incoming additional
data could be just dropped by the TCP stack/TW sockets.
Anyhow we miss sending MPTCP-level ack on incoming DATA_FIN,
and that may hang the peers.
Fixes: e16163b6e2 ("mptcp: refactor shutdown and close")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add mptcpi_local_addr_used and mptcpi_local_addr_max in struct mptcp_info.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow userspace (mptcpd) to subscribe to mptcp genl multicast events.
This implementation reuses the same event API as the mptcp kernel fork
to ease integration of existing tools, e.g. mptcpd.
Supported events include:
1. start and close of an mptcp connection
2. start and close of subflows (joins)
3. announce and withdrawals of addresses
4. subflow priority (backup/non-backup) change.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once event support is added this may need to allocate memory while msk
lock is held with softirqs disabled.
Not using lock_fast also allows to do the allocation with GFP_KERNEL.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass the first/initial subflow to the existing functions so they can
pass this on to the notification handler that is added later in the
series.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case mptcp socket is already dead the entire mptcp socket
will be freed. We can avoid the close check in this case.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When remote side closes a subflow we should schedule the worker to
dispose of the subflow in a timely manner.
Otherwise, SF_CLOSED event won't be generated until the mptcp
socket itself is closing or local side is closing another subflow.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare for subflow close events:
When mptcp connection is torn down its enough to send the mptcp socket
close notification rather than a subflow close event for all of the
subflows followed by the mptcp close event.
This splits the helper: mptcp_close_ssk() will emit the close
notification, __mptcp_close_ssk will not.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allows to make some functions static and avoids acquire of the pm
spinlock in protocol.c.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we do not schedule the MPTCP retransmission
timer after pushing the data when such action happens
in the subflow context.
This may cause hang-up on active-backup scenarios, or
even when only single subflow msks are involved, if we lost
some peer's ack.
Fixes: 6e628cd3a8 ("mptcp: use mptcp release_cb for delayed tasks")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move mptcp_cleanup_rbuf() related checks inside the mentioned
helper and extend them to mirror TCP checks more closely.
Additionally drop the 'rmem_pending' hack, since commit 879526030c
("mptcp: protect the rx path with the msk socket spinlock") we
can use instead 'rmem_released'.
Fixes: ea4ca586b1 ("mptcp: refine MPTCP-level ack scheduling")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mptcp subflow route_req() callback performs the subflow
req initialization after the route_req() check. If the latter
fails, mptcp-specific bits of the current request sockets
are left uninitialized.
The above causes bad things at req socket disposal time, when
the mptcp resources are cleared.
This change addresses the issue by splitting subflow_init_req()
into the actual initialization and the mptcp-specific checks.
The initialization is moved before any possibly failing check.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Fixes: 7ea851d19b ("tcp: merge 'init_req' and 'route_req' functions")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Syzkaller was able to trigger the following splat again:
WARNING: CPU: 1 PID: 12512 at net/mptcp/protocol.c:761 mptcp_reset_timer+0x12a/0x160 net/mptcp/protocol.c:761
Modules linked in:
CPU: 1 PID: 12512 Comm: kworker/1:6 Not tainted 5.10.0-rc6 #52
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: events mptcp_worker
RIP: 0010:mptcp_reset_timer+0x12a/0x160 net/mptcp/protocol.c:761
Code: e8 4b 0c ad ff e8 56 21 88 fe 48 b8 00 00 00 00 00 fc ff df 48 c7 04 03 00 00 00 00 48 83 c4 40 5b 5d 41 5c c3 e8 36 21 88 fe <0f> 0b 41 bc c8 00 00 00 eb 98 e8 e7 b1 af fe e9 30 ff ff ff 48 c7
RSP: 0018:ffffc900018c7c68 EFLAGS: 00010293
RAX: ffff888108cb1c80 RBX: 1ffff92000318f8d RCX: ffffffff82ad0307
RDX: 0000000000000000 RSI: ffffffff82ad036a RDI: 0000000000000007
RBP: ffff888113e2d000 R08: ffff888108cb1c80 R09: ffffed10227c5ab7
R10: ffff888113e2d5b7 R11: ffffed10227c5ab6 R12: 0000000000000000
R13: ffff88801f100000 R14: ffff888113e2d5b0 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff88811b500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd76a874ef8 CR3: 000000001689c005 CR4: 0000000000170ee0
Call Trace:
mptcp_worker+0xaa4/0x1560 net/mptcp/protocol.c:2334
process_one_work+0x8d3/0x1200 kernel/workqueue.c:2272
worker_thread+0x9c/0x1090 kernel/workqueue.c:2418
kthread+0x303/0x410 kernel/kthread.c:292
ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:296
The mptcp_worker tries to update the MPTCP retransmission timer
even if such timer is not currently scheduled.
The mptcp_rtx_head() return value is bogus: we can have enqueued
data not yet transmitted. The above may additionally cause spurious,
unneeded MPTCP-level retransmissions.
Fix the issue adding an explicit clearing of the rtx queue before
trying to retransmit and checking for unacked data.
Additionally drop an unneeded timer stop call and the unused
mptcp_rtx_tail() helper.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Fixes: 6e628cd3a8 ("mptcp: use mptcp release_cb for delayed tasks")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current mptcp_poll() implementation gives unexpected
results after shutdown(SEND_SHUTDOWN) and when the msk
status is TCP_CLOSE.
Set the correct mask.
Fixes: 8edf08649e ("mptcp: rework poll+nospace handling")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently all errors received on msk subflows are ignored.
We need to catch at least the errors on connect() and
on fallback sockets.
Use a custom sk_error_report callback at subflow level,
and do the real action under the msk socket lock - via
the usual sock_owned_by_user()/release_callback() schema.
Fixes: 6e628cd3a8 ("mptcp: use mptcp release_cb for delayed tasks")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a few assertions to make sure functions are called with the needed
locks held.
Two functions gain might_sleep annotations because they contain
conditional calls to functions that sleep.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds the mibs for ADD_ADDR with port:
MPTCP_MIB_PORTADD for received ADD_ADDR suboption with a port number.
MPTCP_MIB_PORTSYNRX, MPTCP_MIB_PORTSYNACKRX, MPTCP_MIB_PORTACKRX, for
received MP_JOIN's SYN or SYN/ACK or ACK with a port number which is
different from the msk's port number.
MPTCP_MIB_MISMATCHPORTSYNRX and MPTCP_MIB_MISMATCHPORTACKRX, for
received SYN or ACK MP_JOIN with a mismatched port-number.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds MPTCP_PM_ADDR_ATTR_PORT filling and parsing in PM
netlink.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When dealing with the addresses list local_addr_list or anno_list, we
should enable the function addresses_equal's parameter use_port. And
enable it in address_zero too.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds two new helpers, subflow_use_different_sport and
subflow_use_different_dport, to check whether the subflow's source or
destination port number is different from the msk's port number. When
receiving the MP_JOIN's SYN/SYNACK/ACK, we do these port number checks
and print out the different port numbers.
And furthermore, when receiving the MP_JOIN's SYN/ACK, we also use a new
helper mptcp_pm_sport_in_anno_list to check whether this port number is
announced. If it isn't, we need to abort this connection.
This patch also populates the local address's port field in
local_address.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a new helper named subflow_req_create_thmac, which is
extracted from subflow_token_join_request. It initializes subflow_req's
local_nonce and thmac fields, those are the more expensive to populate.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch drops the unused parameter skb in subflow_token_join_request.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch creates a listening socket when an address with a port-number
is added by PM netlink. Then binds the new port to the socket, and
listens for new connections.
When the address is removed or the addresses are flushed by PM netlink,
release the listening socket.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch changes the sending ACK conditions for the ADD_ADDR, send an
ACK packet for any ADD_ADDR, not just when ipv6 addresses or port
numbers are included.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/139
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, when a new MPTCP endpoint is added, the existing MPTCP
sockets are not affected.
This patch implements a new function mptcp_nl_add_subflow_or_signal_addr,
invoked when an address is added from PM netlink. This function traverses
the MPTCP sockets list and invokes mptcp_pm_create_subflow_or_signal_addr
to try to create a subflow or signal an address for the newly added
address, if local constraint allows that.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/19
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch drops the per-msk values add_addr_signal_max,
add_addr_accept_max, local_addr_max and subflows_max fields in struct
mptcp_pm_data, uses the pernet *_max values instead. And adds four new
helpers to get the pernet *_max values separately.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch uses WRITE_ONCE() for all the pernet add_addr_signal_max,
add_addr_accept_max, local_addr_max and subflows_max fields in struct
pm_nl_pernet to avoid concurrency issues.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With version 0 of the protocol it was legal to encode the 'Subflow Id' in
the MP_PRIO suboption, to specify which subflow would change its 'Backup'
flag. This has been removed from v1 specification: thus, according to RFC
8684 §3.3.8, the resulting 'Length' for MP_PRIO changed from 4 to 3 byte.
Current Linux generates / parses MP_PRIO according to the old spec, using
'Length' equal to 4, and hardcoding 1 as 'Subflow Id'; RFC compliance can
improve if we change 'Length' in other to become 3, leaving a 'Nop' after
the MP_PRIO suboption. In this way the kernel will emit and accept *only*
MP_PRIO suboptions that are compliant to version 1 of the MPTCP protocol.
unpatched 5.11-rc kernel:
[root@bottarga ~]# tcpdump -tnnr unpatched.pcap | grep prio
reading from file unpatched.pcap, link-type LINUX_SLL (Linux cooked v1)
dropped privs to tcpdump
IP 10.0.3.2.48433 > 10.0.1.1.10006: Flags [.], ack 1, win 502, options [nop,nop,TS val 4032325513 ecr 1876514270,mptcp prio non-backup id 1,mptcp dss ack 14084896651682217737], length 0
patched 5.11-rc kernel:
[root@bottarga ~]# tcpdump -tnnr patched.pcap | grep prio
reading from file patched.pcap, link-type LINUX_SLL (Linux cooked v1)
dropped privs to tcpdump
IP 10.0.3.2.49735 > 10.0.1.1.10006: Flags [.], ack 1, win 502, options [nop,nop,TS val 1276737699 ecr 2686399734,mptcp prio non-backup,nop,mptcp dss ack 18433038869082491686], length 0
Changes since v2:
- when accounting for option space, don't increment 'TCPOLEN_MPTCP_PRIO'
and use 'TCPOLEN_MPTCP_PRIO_ALIGN' instead, thanks to Matthieu Baerts.
Changes since v1:
- refactor patch to avoid using 'TCPOLEN_MPTCP_PRIO' with its old value,
thanks to Geliang Tang.
Fixes: 067065422f ("mptcp: add the outgoing MP_PRIO support")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Matteo Croce <mcroce@linux.microsoft.com>
Link: https://lore.kernel.org/r/846cdd41e6ad6ec88ef23fee1552ab39c2f5a3d1.1612184361.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maxim Galaganov
Florian Westphal
Eric Dumazet
Paolo Abeni
Davide Caratti
Jakub Kicinski
Poorva Sonparote
Geliang Tang
Mat Martineau
Tim Gardner
Geliang Tang
Wan Jiabing
Yonglong Li
Matthieu Baerts
Geliang Tang
Yajun Deng
Jianguo Wu
Yangbo Lu
Alexander Aring
Maxim Mikityanskiy
David S. Miller
Nico Pache
Bhaskar Chowdhury
Dan Carpenter