Граф коммитов

24 Коммитов

Автор SHA1 Сообщение Дата
Ronald Tschalär 757c968c44 ACPI / SBS: Fix rare oops when removing modules
There was a small race when removing the sbshc module where
smbus_alarm() had queued acpi_smbus_callback() for deferred execution
but it hadn't been run yet, so that when it did run hc had been freed
and the module unloaded, resulting in an invalid paging request.

A similar race existed when removing the sbs module with regards to
acpi_sbs_callback() (which is called from acpi_smbus_callback()).

We therefore need to ensure no callbacks are pending or executing before
the cleanups are done and the modules are removed.

Signed-off-by: Ronald Tschalär <ronald@innovation.ch>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 08:41:35 +02:00
Greg Kroah-Hartman 43cdd1b716 ACPI: sbshc: remove raw pointer from printk() message
There's no need to be printing a raw kernel pointer to the kernel log at
every boot.  So just remove it, and change the whole message to use the
correct dev_info() call at the same time.

Reported-by: Wang Qize <wang_qize@venustech.com.cn>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-08 09:50:08 +01:00
Chris Bainbridge a76032e0ab Revert "ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook"
Revert commit 3349fb64b2 (ACPI / SBS: Add 5 us delay to fix SBS
hangs on MacBook), since the delay introduced by it is not necessary
any more after commit add68d6aa9 (ACPI / SMBus: Fix boot stalls /
high CPU caused by reentrant code).

Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-16 23:26:45 +01:00
Chris Bainbridge add68d6aa9 ACPI / SMBus: Fix boot stalls / high CPU caused by reentrant code
In the SBS initialisation, a reentrant call to wait_event_timeout()
causes an intermittent boot stall of several minutes usually following
the "Switching to clocksource tsc" message. Another symptom of this bug
is high CPU usage from programs (Firefox, upowerd) querying the battery
state. This is caused by:

 1. drivers/acpi/sbshc.c wait_transaction_complete() calls
    wait_event_timeout():

 	if (wait_event_timeout(hc->wait, smb_check_done(hc),
 			       msecs_to_jiffies(timeout)))

 2. ___wait_event sets task state to uninterruptible

 3. ___wait_event calls the "condition" smb_check_done()

 4. smb_check_done (sbshc.c) calls through to ec_read() in
    drivers/acpi/ec.c

 5. ec_guard() is reached which calls wait_event_timeout()

 	if (wait_event_timeout(ec->wait,
 			       ec_transaction_completed(ec),
 			       guard))

    ie. wait_event_timeout() is being called again inside evaluation of
    the previous wait_event_timeout() condition

 5. The EC IRQ handler calls wake_up() and wakes up the sleeping task in
    ec_guard()

 6. The task is now in state running even though the wait "condition" is
    still being evaluated

 7. The "condition" check returns false so ___wait_event calls
    schedule_timeout()

 8. Since the task state is running, the scheduler immediately schedules
    it again

 9. This loop usually repeats for around 250 seconds even though the
    original wait_event_timeout was only 1000ms.

    The timeout is incorrect because each call to schedule_timeout()
    usually returns immediately, taking less than 1ms, so the jiffies
    timeout counter is not decremented. The task is now stuck in a
    running state, and so is highly likely to be immediately
    rescheduled, which takes less than a jiffy. The loop will never exit
    if all schedule_timeout() calls take less than a jiffy.

Fix this by replacing SMBus reads in the wait_event_timeout condition
with checks of a boolean value that is updated by the EC query handler.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=107191
Link: https://lkml.org/lkml/2015/11/6/776
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-16 23:23:45 +01:00
Chris Bainbridge 3349fb64b2 ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook
Commit 7bc5a2bad0 'ACPI: Support _OSI("Darwin") correctly' caused
the MacBook firmware to expose the SBS, resulting in intermittent
hangs of several minutes on boot, and failure to detect or report
the battery.  Fix this by adding a 5 us delay to the start of each
SMBUS transaction.  This timing is the result of experimentation -
hangs were observed with 3 us but never with 5 us.

Fixes: 7bc5a2bad0 'ACPI: Support _OSI("Darwin") correctly'
Link: https://bugzilla.kernel.org/show_bug.cgi?id=94651
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Cc: 3.18+ <stable@vger.kernel.org> # 3.18+
[ rjw: Subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-30 23:18:11 +02:00
Lv Zheng 8b48463f89 ACPI: Clean up inclusions of ACPI header files
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and
<acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h>
inclusions and remove some inclusions of those files that aren't
necessary.

First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>
should not be included directly from any files that are built for
CONFIG_ACPI unset, because that generally leads to build warnings about
undefined symbols in !CONFIG_ACPI builds.  For CONFIG_ACPI set,
<linux/acpi.h> includes those files and for CONFIG_ACPI unset it
provides stub ACPI symbols to be used in that case.

Second, there are ordering dependencies between those files that always
have to be met.  Namely, it is required that <acpi/acpi_bus.h> be included
prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the
latter depends on are always there.  And <acpi/acpi.h> which provides
basic ACPICA type declarations should always be included prior to any other
ACPI headers in CONFIG_ACPI builds.  That also is taken care of including
<linux/acpi.h> as appropriate.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff)
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-07 01:03:14 +01:00
Rafael J. Wysocki 51fac8388a ACPI: Remove useless type argument of driver .remove() operation
The second argument of ACPI driver .remove() operation is only used
by the ACPI processor driver and the value passed to that driver
through it is always available from the given struct acpi_device
object's removal_type field.  For this reason, the second ACPI driver
.remove() argument is in fact useless, so drop it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
2013-01-26 00:37:24 +01:00
Mika Westerberg e84a239e75 ACPI/sbshc: convert to module_acpi_driver()
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-21 13:39:40 -04:00
Paul Gortmaker cc4b859c70 acpi: add module.h to files implicitly using/relying on it.
These files are using standard module API things like MODULE_AUTHOR
etc. and so should not be relying on an implicit presence of the
module.h header.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:30:32 -04:00
Dan Carpenter 97c227cb51 sbshc: acpi_device_class "smbus_host_controller" too long
acpi_device_class can only be 19 characters and a NULL terminator.

With the current name we get a buffer overflow in acpi_smbus_hc_add()
when we do:
	strcpy(acpi_device_class(device), ACPI_SMB_HC_CLASS);

Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-06 02:38:25 -04:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Alexey Starikovskiy f5347867c5 ACPI: SBS: Move SBS HC callback to faster Notify queue
SBS transactions should happen in Notify work queue, to not create
a dead lock with GPE execution accessing SBS devices.

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-15 22:52:48 -05:00
Len Brown a192a9580b ACPI: Move definition of PREFIX from acpi_bus.h to internal..h
Linux/ACPI core files using internal.h all PREFIX "ACPI: ",
however, not all ACPI drivers use/want it -- and they
should not have to #undef PREFIX to define their own.

Add GPL commment to internal.h while we are there.

This does not change any actual console output,
asside from a whitespace fix.

Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28 19:57:27 -04:00
Lin Ming ea7e96e0f2 ACPI: remove private acpica headers from driver files
External driver files should not include any private acpica headers.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31 01:15:22 -05:00
Len Brown 7674416db4 Merge branch 'ull' into test
Conflicts:
	drivers/acpi/bay.c
	drivers/acpi/dock.c
	drivers/ata/libata-acpi.c

Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22 23:33:29 -04:00
Matthew Wilcox 27663c5855 ACPI: Change acpi_evaluate_integer to support 64-bit on 32-bit kernels
As of version 2.0, ACPI can return 64-bit integers.  The current
acpi_evaluate_integer only supports 64-bit integers on 64-bit platforms.
Change the argument to take a pointer to an acpi_integer so we support
64-bit integers on all platforms.

lenb: replaced use of "acpi_integer" with "unsigned long long"
lenb: fixed bug in acpi_thermal_trips_update()

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-11 02:47:33 -04:00
Pavel Machek db89b4f0db ACPI: catch calls of acpi_driver_data on pointer of wrong type
Catch attempts to use of acpi_driver_data on pointers of wrong type.

akpm: rewritten to use proper C typechecking and remove the
"function"-used-as-lvalue thing.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-10 18:05:53 -04:00
Zhao Yakui 266feefeb9 ACPI: Avoid bogus timeout about SMbus check
In the function of wait_transaction_complete when the timeout happens,
OS will try to check the status of SMbus again. If the status is what OS
expected, it will be regarded as the bogus timeout. Otherwise it will be
treated as ETIME.

http://bugzilla.kernel.org/show_bug.cgi?id=10483

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
tested-by    : Oldřich Jedlička < <oldium.pro@seznam.cz>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-09-04 14:32:28 +02:00
Alexey Starikovskiy 7642d21130 ACPI: SBS: remove typo from sbchc.c
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-18 05:13:14 -04:00
Alexey Starikovskiy bbafbecb24 ACPI: SBS: Host controller must initialize before SBS.
In static case sbshc must be compiled ahead of sbs, so that
hc is configured first.

http://bugzilla.kernel.org/show_bug.cgi?id=9910

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-09 03:22:13 -05:00
Adrian Bunk e5685b9d35 ACPI: misc cleanups
This patch contains the following possible cleanups:
    - make the following needlessly global code static:
      - drivers/acpi/bay.c:dev_attr_eject
      - drivers/acpi/bay.c:dev_attr_present
      - drivers/acpi/dock.c:dev_attr_docked
      - drivers/acpi/dock.c:dev_attr_flags
      - drivers/acpi/dock.c:dev_attr_uid
      - drivers/acpi/dock.c:dev_attr_undock
      - drivers/acpi/pci_bind.c:acpi_pci_unbind()
      - drivers/acpi/pci_link.c:acpi_link_lock
      - drivers/acpi/sbs.c:acpi_sbs_callback()
      - drivers/acpi/sbshc.c:acpi_smbus_transaction()
      - drivers/acpi/sleep/main.c:acpi_sleep_prepare()
    - #if 0 the following unused global functions:
      - drivers/acpi/numa.c:acpi_unmap_pxm_to_node()
    - remove the following unused EXPORT_SYMBOL's:
      - acpi_register_gsi
      - acpi_unregister_gsi
      - acpi_strict
      - acpi_bus_receive_event
      - register_acpi_bus_type
      - unregister_acpi_bus_type
      - acpi_os_printf
      - acpi_os_sleep
      - acpi_os_stall
      - acpi_os_read_pci_configuration
      - acpi_os_create_semaphore
      - acpi_os_delete_semaphore
      - acpi_os_wait_semaphore
      - acpi_os_signal_semaphore
      - acpi_os_signal
      - acpi_pci_irq_enable
      - acpi_get_pxm

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-07 03:33:23 -05:00
Alexey Starikovskiy c2d00f2d1b ACPI: SBS: Ignore alarms coming from unknown devices
http://bugzilla.kernel.org/show_bug.cgi?id=9362

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-12-14 15:14:06 -05:00
Alexey Starikovskiy 09f1fb41ad ACPI: SBS: Reset alarm bit
Alarm bit should be cleared in order for other alarms to be sent.
http://bugzilla.kernel.org/show_bug.cgi?id=9362

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-12-14 15:13:51 -05:00
Alexey Starikovskiy 91087dfa51 ACPI: SBS: Split host controller (ACPI0001) from SBS driver (ACPI0002)
Replace poll-based host controller driver with the notify-based one.
Split it out of sbs.c.
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-09-27 15:50:22 -04:00