Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout
the stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower
iTLB pressure and prevents identity mapping huge pages from
getting split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop
the user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if called
from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling
of TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmI7YBcACgkQMUZtbf5S
IrveSBAAmSNJlUK6vPsnNzs7IhsZnfI/AUjm2TCLZnlhKttbpI4A/4Pohk33V7RS
FGX7f8kjEfhUwrIiLDgeCnztNHRECrCmk6aZc/jLEvecmTauJ+f6kjShkDY/wix+
AkPHmrZnQeLPAEVuljDdV+sL6ik08+zQL7PazIYHsaSKKC0MGQptRwcri8PLRAKE
KPBAhVhleq2rAZ/ntprSN52F4Af6rpFTrPIWuN8Bqdbc9dy5094LT0mpOOWYvgr3
/DLvvAPuLemwyIQkjWknVKBRUAQcmNPC+BY3J8K3LRaiNhekGqOFan46BfqP+k2J
6DWu0Qrp2yWt4BMOeEToZR5rA6v5suUAMIBu8PRZIDkINXQMlIxHfGjZyNm0rVfw
7edNri966yus9OdzwPa32MIG3oC6PnVAwYCJAjjBMNS8sSIkp7wgHLkgWN4UFe2H
K/e6z8TLF4UQ+zFM0aGI5WZ+9QqWkTWEDF3R3OhdFpGrznna0gxmkOeV2YvtsgxY
cbS0vV9Zj73o+bYzgBKJsw/dAjyLdXoHUGvus26VLQ78S/VGunVKtItwoxBAYmZo
krW964qcC89YofzSi8RSKLHuEWtNWZbVm8YXr75u6jpr5GhMBu0CYefLs+BuZcxy
dw8c69cGneVbGZmY2J3rBhDkchbuICl8vdUPatGrOJAoaFdYKuw=
=ELpe
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
There are a few separately maintained driver subsystems that we merge through
the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs,
and clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport based
on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ
and older NVIDIA Tegra chips
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmI4nOUACgkQmmx57+YA
GNlNNhAApPQw+FKQ6yVj2EZYcaAgik8PJAJoNQWYED52iQfm5uXgjt3aQewvrPNW
nkKx5Mx+fPUfaKx5mkVOFMhME5Bw9tYbXHm2/RpRp+n8jOdUlQpAhzIPOyWPHOJS
QX6qu4t+agrQzjbOCGouAJXgyxhTJFUMviM2EgVHbQHXPtdF8i2kyanfCP7Rw8cx
sVtLwpvhbLm849+deYRXuv2Xw9I3M1Np7018s5QciimI2eLLEb+lJ/C5XWz5pMYn
M1nZ7uwCLKPCewpMETTuhKOv0ioOXyY9C1ghyiGZFhHQfoCYTu94Hrx9t8x5gQmL
qWDinXWXVk8LBegyrs8Bp4wcjtmvMMLnfWtsGSfT5uq24JOGg22OmtUNhNJbS9+p
VjEvBgkXYD7UEl5npI9v9/KQWr3/UDir0zvkuV40gJyeBWNEZ/PB8olXAxgL7wZv
cXRYSaUYYt3DKQf1k5I4GUyQtkP/4RaBy6AqvH5Sx0lCwuY6G6ISK+kCPaaSRKnX
WR+nFw84dKCu7miehmW9qSzMQ4kiSCKIDqk7ilHcwv0J2oXDrlqVPKGGGTzZjUc8
+feqM/eSoYvDDEDemuXNSnl3hc1Zlvm7Apd5AN6kdTaNgoACDYdyvGuJ3CvzcA+K
1gBHUBvGS/ODA25KnYabr7wCMgxYqf7dXfkyKIBwFHwxOnRHtgs=
=Cfbk
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are a few separately maintained driver subsystems that we merge
through the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs, and
clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport
based on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ and older
NVIDIA Tegra chips"
* tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits)
ARM: spear: fix typos in comments
soc/microchip: fix invalid free in mpfs_sys_controller_delete
soc: s4: Add support for power domains controller
dt-bindings: power: add Amlogic s4 power domains bindings
ARM: at91: add support in soc driver for new SAMA5D29
soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data
dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC
memory: emif: check the pointer temp in get_device_details()
memory: emif: Add check for setup_interrupts
dt-bindings: arm: mediatek: mmsys: add support for MT8186
dt-bindings: mediatek: add compatible for MT8186 pwrap
soc: mediatek: pwrap: add pwrap driver for MT8186 SoC
soc: mediatek: mmsys: add mmsys reset control for MT8186
soc: mediatek: mtk-infracfg: Disable ACP on MT8192
soc: ti: k3-socinfo: Add AM62x JTAG ID
soc: mediatek: add MTK mutex support for MT8186
soc: mediatek: mmsys: add mt8186 mmsys routing table
soc: mediatek: pm-domains: Add support for mt8186
dt-bindings: power: Add MT8186 power domains
soc: mediatek: pm-domains: Add support for mt8195
...
-----BEGIN PGP SIGNATURE-----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=5E1v
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20220321' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"We've got a number of SELinux patches queued up, the highlights are:
- Fixup the security_fs_context_parse_param() LSM hook so it executes
all of the LSM hook implementations unless a serious error occurs.
We also correct the SELinux hook implementation so that it returns
zero on success.
- In addition to a few SELinux mount option parsing fixes, we
simplified the parsing by moving it earlier in the process.
The logic was that it was unlikely an admin/user would use the new
mount API and not have the policy loaded before passing the SELinux
options.
- Properly fixed the LSM/SELinux/SCTP hooks with the addition of the
security_sctp_assoc_established() hook.
This work was done in conjunction with the netdev folks and should
complete the move of the SCTP labeling from the endpoints to the
associations.
- Fixed a variety of sparse warnings caused by changes in the "__rcu"
markings of some core kernel structures.
- Ensure we access the superblock's LSM security blob using the
stacking-safe accessors.
- Added the ability for the kernel to always allow FIOCLEX and
FIONCLEX if the "ioctl_skip_cloexec" policy capability is
specified.
- Various constifications improvements, type casting improvements,
additional return value checks, and dead code/parameter removal.
- Documentation fixes"
* tag 'selinux-pr-20220321' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (23 commits)
selinux: shorten the policy capability enum names
docs: fix 'make htmldocs' warning in SCTP.rst
selinux: allow FIOCLEX and FIONCLEX with policy capability
selinux: use correct type for context length
selinux: drop return statement at end of void functions
security: implement sctp_assoc_established hook in selinux
security: add sctp_assoc_established hook
selinux: parse contexts for mount options early
selinux: various sparse fixes
selinux: try to use preparsed sid before calling parse_sid()
selinux: Fix selinux_sb_mnt_opts_compat()
LSM: general protection fault in legacy_parse_param
selinux: fix a type cast problem in cred_init_security()
selinux: drop unused macro
selinux: simplify cred_init_security
selinux: do not discard const qualifier in cast
selinux: drop unused parameter of avtab_insert_node
selinux: drop cast to same type
selinux: enclose macro arguments in parenthesis
selinux: declare name parameter of hash_eval const
...
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYji6mxQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5bbvAQDB0uFJXS+FutMZSdfoXdvoV36piSyV
KNEo+sM0Ie0FTQEAtHnMZbIB2Tc5szJXaxgDbr6XbRKW4aaJonkvnYF93QQ=
=ZuAU
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
"Except for extending the 'encrypted' key type to support user provided
data, the rest is code cleanup, __setup() usage bug fix, and a trivial
change"
* tag 'integrity-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
MAINTAINERS: add missing security/integrity/platform_certs
EVM: fix the evm= __setup handler return value
KEYS: encrypted: Instantiate key with user-provided decrypted data
ima: define ima_max_digest_data struct without a flexible array variable
ima: rename IMA_ACTION_FLAGS to IMA_NONACTION_FLAGS
ima: Return error code obtained from securityfs functions
MAINTAINERS: add missing "security/integrity" directory
ima: Fix trivial typos in the comments
Fix incorrect type in assignment of ipv6 port for audit
-----BEGIN PGP SIGNATURE-----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=j/eV
-----END PGP SIGNATURE-----
Merge tag 'Smack-for-5.18' of https://github.com/cschaufler/smack-next
Pull smack update from Casey Schaufler:
"A single fix to repair an incorrect use of ntohs() in IPv6 audit code.
It's very minor and went unnoticed until lkp found it.
It's been in next and passes all tests"
* tag 'Smack-for-5.18' of https://github.com/cschaufler/smack-next:
Fix incorrect type in assignment of ipv6 port for audit
__ima_inode_hash() checks if a digest has been already calculated by
looking for the integrity_iint_cache structure associated to the passed
inode.
Users of ima_file_hash() (e.g. eBPF) might be interested in obtaining the
information without having to setup an IMA policy so that the digest is
always available at the time they call this function.
In addition, they likely expect the digest to be fresh, e.g. recalculated
by IMA after a file write. Although getting the digest from the
bprm_committed_creds hook (as in the eBPF test) ensures that the digest is
fresh, as the IMA hook is executed before that hook, this is not always the
case (e.g. for the mmap_file hook).
Call ima_collect_measurement() in __ima_inode_hash(), if the file
descriptor is available (passed by ima_file_hash()) and the digest is not
available/not fresh, and store the file measurement in a temporary
integrity_iint_cache structure.
This change does not cause memory usage increase, due to using the
temporary integrity_iint_cache structure, and due to freeing the
ima_digest_data structure inside integrity_iint_cache before exiting from
__ima_inode_hash().
For compatibility reasons, the behavior of ima_inode_hash() remains
unchanged.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20220302111404.193900-3-roberto.sassu@huawei.com
Fix the following warnings in ima_main.c, displayed with W=n make argument:
security/integrity/ima/ima_main.c:432: warning: Function parameter or
member 'vma' not described in 'ima_file_mprotect'
security/integrity/ima/ima_main.c:636: warning: Function parameter or
member 'inode' not described in 'ima_post_create_tmpfile'
security/integrity/ima/ima_main.c:636: warning: Excess function parameter
'file' description in 'ima_post_create_tmpfile'
security/integrity/ima/ima_main.c:843: warning: Function parameter or
member 'load_id' not described in 'ima_post_load_data'
security/integrity/ima/ima_main.c:843: warning: Excess function parameter
'id' description in 'ima_post_load_data'
Also, fix some style issues in the description of ima_post_create_tmpfile()
and ima_post_path_mknod().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20220302111404.193900-2-roberto.sassu@huawei.com
With the introduction of uefi_check_trust_mok_keys, it signifies the end-
user wants to trust the machine keyring as trusted keys. If they have
chosen to trust the machine keyring, load the qualifying keys into it
during boot, then link it to the secondary keyring . If the user has not
chosen to trust the machine keyring, it will be empty and not linked to
the secondary keyring.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
A new Machine Owner Key (MOK) variable called MokListTrustedRT has been
introduced in shim. When this UEFI variable is set, it indicates the
end-user has made the decision themselves that they wish to trust MOK keys
within the Linux trust boundary. It is not an error if this variable
does not exist. If it does not exist, the MOK keys should not be trusted
within the kernel.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Expose the .machine keyring created in integrity code by adding
a reference. Store a reference to the machine keyring in
system keyring code. The system keyring code needs this to complete
the keyring link to the machine keyring.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Currently both Secure Boot DB and Machine Owner Keys (MOK) go through
the same keyring handler (get_handler_for_db). With the addition of the
new machine keyring, the end-user may choose to trust MOK keys.
Introduce a new keyring handler specific for MOK keys. If MOK keys are
trusted by the end-user, use the new keyring handler instead.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Many UEFI Linux distributions boot using shim. The UEFI shim provides
what is called Machine Owner Keys (MOK). Shim uses both the UEFI Secure
Boot DB and MOK keys to validate the next step in the boot chain. The
MOK facility can be used to import user generated keys. These keys can
be used to sign an end-users development kernel build. When Linux
boots, both UEFI Secure Boot DB and MOK keys get loaded in the Linux
.platform keyring.
Define a new Linux keyring called machine. This keyring shall contain just
MOK keys and not the remaining keys in the platform keyring. This new
machine keyring will be used in follow on patches. Unlike keys in the
platform keyring, keys contained in the machine keyring will be trusted
within the kernel if the end-user has chosen to do so.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
make W=1 generates the following warning in keyring_handler.c
security/integrity/platform_certs/keyring_handler.c:71:30: warning: no previous prototype for get_handler_for_db [-Wmissing-prototypes]
__init efi_element_handler_t get_handler_for_db(const efi_guid_t *sig_type)
^~~~~~~~~~~~~~~~~~
security/integrity/platform_certs/keyring_handler.c:82:30: warning: no previous prototype for get_handler_for_dbx [-Wmissing-prototypes]
__init efi_element_handler_t get_handler_for_dbx(const efi_guid_t *sig_type)
^~~~~~~~~~~~~~~~~~~
Add the missing prototypes by including keyring_handler.h.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
If one loads and unloads the trusted module, trusted_key_exit can be
NULL. Call it through static_call_cond() to avoid a kernel trap.
Fixes: 5d0682be31 ("KEYS: trusted: Add generic trusted keys framework")
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-integrity@vger.kernel.org
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Before this commit the kernel could end up with no trusted key sources
even though both of the currently supported backends (TPM and TEE) were
compiled as modules. This manifested in the trusted key type not being
registered at all.
When checking if a CONFIG_… preprocessor variable is defined we only
test for the builtin (=y) case and not the module (=m) case. By using
the IS_REACHABLE() macro we do test for both cases.
Fixes: 5d0682be31 ("KEYS: trusted: Add generic trusted keys framework")
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Andreas Rammhold <andreas@rammhold.de>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In many cases, keyctl_pkey_params_get_2() is validating the user buffer
lengths against the wrong algorithm properties. Fix it to check against
the correct properties.
Probably this wasn't noticed before because for all asymmetric keys of
the "public_key" subtype, max_data_size == max_sig_size == max_enc_size
== max_dec_size. However, this isn't necessarily true for the
"asym_tpm" subtype (it should be, but it's not strictly validated). Of
course, future key types could have different values as well.
Fixes: 00d60fd3b9 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]")
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The offloaded HW stats are designed to allow per-netdevice enablement and
disablement. These stats are only accessible through RTM_GETSTATS, and
therefore should be toggled by a RTM_SETSTATS message. Add it, and the
necessary skeleton handler.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct dh contains several pointer members corresponding to DH parameters:
->key, ->p and ->g. A subsequent commit will introduce "dh" wrapping
templates of the form "ffdhe2048(dh)", "ffdhe3072(dh)" and so on in order
to provide built-in support for the well-known safe-prime ffdhe group
parameters specified in RFC 7919. These templates will need to set the
group parameter related members of the (serialized) struct dh instance
passed to the inner "dh" kpp_alg instance, i.e. ->p and ->g, to some
constant, static storage arrays.
Turn the struct dh pointer members' types into "pointer to const" in
preparation for this.
Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SELinux policy capability enum names are rather long and follow
the "POLICYDB_CAPABILITY_XXX format". While the "POLICYDB_" prefix
is helpful in tying the enums to other SELinux policy constants,
macros, etc. there is no reason why we need to spell out
"CAPABILITY" completely. Shorten "CAPABILITY" to "CAP" in order to
make things a bit shorter and cleaner.
Moving forward, the SELinux policy capability enum names should
follow the "POLICYDB_CAP_XXX" format.
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch adds new rtm tunnel msg and api for tunnel id
filtering in dst_metadata devices. First dst_metadata
device to use the api is vxlan driver with AF_BRIDGE
family.
This and later changes add ability in vxlan driver to do
tunnel id filtering (or vni filtering) on dst_metadata
devices. This is similar to vlan api in the vlan filtering bridge.
this patch includes selinux nlmsg_route_perms support for RTM_*TUNNEL
api from Benjamin Poirier.
Signed-off-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove inappropriate use of ntohs() and assign the
port value directly.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
These ioctls are equivalent to fcntl(fd, F_SETFD, flags), which SELinux
always allows too. Furthermore, a failed FIOCLEX could result in a file
descriptor being leaked to a process that should not have access to it.
As this patch removes access controls, a policy capability needs to be
enabled in policy to always allow these ioctls.
Based-on-patch-by: Demi Marie Obenour <demiobenour@gmail.com>
Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
- The TEE shared memory pool based on two pools is replaced with a single
somewhat more capable pool.
- Replaces tee_shm_alloc() and tee_shm_register() with new functions
easier to use and maintain. The TEE subsystem and the TEE drivers are
updated to use the new functions instead.
- The TEE based Trusted keys routines are updated to use the new
simplified functions above.
- The OP-TEE based rng driver is updated to use the new simplified
functions above.
- The TEE_SHM-flags are refactored to better match their usage
-----BEGIN PGP SIGNATURE-----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=xOBv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=0vIF
-----END PGP SIGNATURE-----
Merge tag 'tee-shm-for-v5.18' of git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers
TEE shared memory cleanup for v5.18
- The TEE shared memory pool based on two pools is replaced with a single
somewhat more capable pool.
- Replaces tee_shm_alloc() and tee_shm_register() with new functions
easier to use and maintain. The TEE subsystem and the TEE drivers are
updated to use the new functions instead.
- The TEE based Trusted keys routines are updated to use the new
simplified functions above.
- The OP-TEE based rng driver is updated to use the new simplified
functions above.
- The TEE_SHM-flags are refactored to better match their usage
* tag 'tee-shm-for-v5.18' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
tee: refactor TEE_SHM_* flags
tee: replace tee_shm_register()
KEYS: trusted: tee: use tee_shm_register_kernel_buf()
tee: add tee_shm_register_{user,kernel}_buf()
optee: add optee_pool_op_free_helper()
tee: replace tee_shm_alloc()
tee: simplify shm pool handling
tee: add tee_shm_alloc_user_buf()
tee: remove unused tee_shm_pool_alloc_res_mem()
hwrng: optee-rng: use tee_shm_alloc_kernel_buf()
optee: use driver internal tee_context for some rpc
Link: https://lore.kernel.org/r/20220218184802.GA968155@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=B7Cx
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20220223' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"A second small SELinux fix which addresses an incorrect
mutex_is_locked() check"
* tag 'selinux-pr-20220223' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix misuse of mutex_is_locked()
__setup() handlers should return 1 if the parameter is handled.
Returning 0 causes the entire string to be added to init's
environment strings (limited to 32 strings), unnecessarily polluting it.
Using the documented strings "TOMOYO_loader=string1" and
"TOMOYO_trigger=string2" causes an Unknown parameter message:
Unknown kernel command line parameters
"BOOT_IMAGE=/boot/bzImage-517rc5 TOMOYO_loader=string1 \
TOMOYO_trigger=string2", will be passed to user space.
and these strings are added to init's environment string space:
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
TOMOYO_loader=string1
TOMOYO_trigger=string2
With this change, these __setup handlers act as expected,
and init's environment is not polluted with these strings.
Fixes: 0e4ae0e0de ("TOMOYO: Make several options configurable.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: https://lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: James Morris <jmorris@namei.org>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: tomoyo-dev-en@lists.osdn.me
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
__setup() handlers should return 1 if the parameter is handled.
Returning 0 causes the entire string to be added to init's
environment strings (limited to 32 strings), unnecessarily polluting it.
Using the documented string "evm=fix" causes an Unknown parameter message:
Unknown kernel command line parameters
"BOOT_IMAGE=/boot/bzImage-517rc5 evm=fix", will be passed to user space.
and that string is added to init's environment string space:
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
evm=fix
With this change, using "evm=fix" acts as expected and an invalid
option ("evm=evm") causes a warning to be printed:
evm: invalid "evm" mode
but init's environment is not polluted with this string, as expected.
Fixes: 7102ebcd65 ("evm: permit only valid security.evm xattrs to be updated")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
mutex_is_locked() tests whether the mutex is locked *by any task*, while
here we want to test if it is held *by the current task*. To avoid
false/missed WARNINGs, use lockdep_assert_is_held() and
lockdep_assert_is_not_held() instead, which do the right thing (though
they are a no-op if CONFIG_LOCKDEP=n).
Cc: stable@vger.kernel.org
Fixes: 2554a48f44 ("selinux: measure state and policy capabilities")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
For availability and performance reasons master keys often need to be
released outside of a Key Management Service (KMS) to clients. It
would be beneficial to provide a mechanism where the
wrapping/unwrapping of data encryption keys (DEKs) is not dependent
on a remote call at runtime yet security is not (or only minimally)
compromised. Master keys could be securely stored in the Kernel and
be used to wrap/unwrap keys from Userspace.
The encrypted.c class supports instantiation of encrypted keys with
either an already-encrypted key material, or by generating new key
material based on random numbers. This patch defines a new datablob
format: [<format>] <master-key name> <decrypted data length>
<decrypted data> that allows to inject and encrypt user-provided
decrypted data. The decrypted data must be hex-ascii encoded.
Signed-off-by: Yael Tzur <yaelt@google.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
security_sid_to_context() expects a pointer to an u32 as the address
where to store the length of the computed context.
Reported by sparse:
security/selinux/xfrm.c:359:39: warning: incorrect type in arg 4
(different signedness)
security/selinux/xfrm.c:359:39: expected unsigned int
[usertype] *scontext_len
security/selinux/xfrm.c:359:39: got int *
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: wrapped commit description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Those return statements at the end of a void function are redundant.
Reported by clang-tidy [readability-redundant-control-flow]
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Uses the new simplified tee_shm_register_kernel_buf() function instead
of the old tee_shm_alloc() function which required specific
TEE_SHM-flags
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Do this by extracting the peer labeling per-association logic from
selinux_sctp_assoc_request() into a new helper
selinux_sctp_process_new_assoc() and use this helper in both
selinux_sctp_assoc_request() and selinux_sctp_assoc_established(). This
ensures that the peer labeling behavior as documented in
Documentation/security/SCTP.rst is applied both on the client and server
side:
"""
An SCTP socket will only have one peer label assigned to it. This will be
assigned during the establishment of the first association. Any further
associations on this socket will have their packet peer label compared to
the sockets peer label, and only if they are different will the
``association`` permission be validated. This is validated by checking the
socket peer sid against the received packets peer sid to determine whether
the association should be allowed or denied.
"""
At the same time, it also ensures that the peer label of the association
is set to the correct value, such that if it is peeled off into a new
socket, the socket's peer label will then be set to the association's
peer label, same as it already works on the server side.
While selinux_inet_conn_established() (which we are replacing by
selinux_sctp_assoc_established() for SCTP) only deals with assigning a
peer label to the connection (socket), in case of SCTP we need to also
copy the (local) socket label to the association, so that
selinux_sctp_sk_clone() can then pick it up for the new socket in case
of SCTP peeloff.
Careful readers will notice that the selinux_sctp_process_new_assoc()
helper also includes the "IPv4 packet received over an IPv6 socket"
check, even though it hadn't been in selinux_sctp_assoc_request()
before. While such check is not necessary in
selinux_inet_conn_request() (because struct request_sock's family field
is already set according to the skb's family), here it is needed, as we
don't have request_sock and we take the initial family from the socket.
In selinux_sctp_assoc_established() it is similarly needed as well (and
also selinux_inet_conn_established() already has it).
Fixes: 72e89f5008 ("security: Add support for SCTP security hooks")
Reported-by: Prashanth Prahlad <pprahlad@redhat.com>
Based-on-patch-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Tested-by: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
security_sctp_assoc_established() is added to replace
security_inet_conn_established() called in
sctp_sf_do_5_1E_ca(), so that asoc can be accessed in security
subsystem and save the peer secid to asoc->peer_secid.
Fixes: 72e89f5008 ("security: Add support for SCTP security hooks")
Reported-by: Prashanth Prahlad <pprahlad@redhat.com>
Based-on-patch-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Tested-by: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
To support larger hash digests in the 'iint' cache, instead of defining
the 'digest' field as the maximum digest size, the 'digest' field was
defined as a flexible array variable. The "ima_digest_data" struct was
wrapped inside a local structure with the maximum digest size. But
before adding the record to the iint cache, memory for the exact digest
size was dynamically allocated.
The original reason for defining the 'digest' field as a flexible array
variable is still valid for the 'iint' cache use case. Instead of
wrapping the 'ima_digest_data' struct in a local structure define
'ima_max_digest_data' struct.
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Simple policy rule options, such as fowner, uid, or euid, can be checked
immediately, while other policy rule options, such as requiring a file
signature, need to be deferred.
The 'flags' field in the integrity_iint_cache struct contains the policy
action', 'subaction', and non action/subaction.
action: measure/measured, appraise/appraised, (collect)/collected,
audit/audited
subaction: appraise status for each hook (e.g. file, mmap, bprm, read,
creds)
non action/subaction: deferred policy rule options and state
Rename the IMA_ACTION_FLAGS to IMA_NONACTION_FLAGS.
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
If an error occurs when creating a securityfs file, return the exact
error code to the caller.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
There are a few minor typos in the comments. Fix these.
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYgBPohQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5d5oAP99Iuskwx22LvkTsq/wtpncbpOq7PCn
m2by5qy3oSbLagD/YRDLh3ilgcvBbf152JBAOl4SRkph7bX/MGF14UZ0Zwg=
=OFwx
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.17-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fixes from Mimi Zohar:
"Fixes for recently found bugs.
One was found/noticed while reviewing IMA support for fsverity digests
and signatures. Two of them were found/noticed while working on IMA
namespacing. Plus two other bugs.
All of them are for previous kernel releases"
* tag 'integrity-v5.17-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Do not print policy rule with inactive LSM labels
ima: Allow template selection with ima_template[_fmt]= after ima_hash=
ima: Remove ima_policy file before directory
integrity: check the return value of audit_log_start()
ima: fix reference leak in asymmetric_verify()
In order to compare instrumentation between builds, make the verbose
mode of the plugin available during the build. This is rarely needed
(behind EXPERT) and very noisy (disabled for COMPILE_TEST).
Cc: Alexander Popov <alex.popov@linux.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Commit b8b87fd954 ("selinux: Fix selinux_sb_mnt_opts_compat()")
started to parse mount options into SIDs in selinux_add_opt() if policy
has already been loaded. Since it's extremely unlikely that anyone would
depend on the ability to set SELinux contexts on fs_context before
loading the policy and then mounting that context after simplify the
logic by always parsing the options early.
Note that the multi-step mounting is only possible with the new
fscontext mount API and wasn't possible before its introduction.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmH8VkAUHHBhdWxAcGF1
bC1tb29yZS5jb20ACgkQ6iDy2pc3iXNyLQ/9GAsvvB7PYeUpj0CGLMaAT9Hys5l+
WPjP+NU+HF+r+AUsSCJwKkK4yKnpEDK9nidOdkwiYjAO/83yl7kkBPGRgisQep1A
tEbuJ5vqZnR59jLxNKCmQE0gY+gByjk3jZIVFLSWwG/ho7s1LQyNoYpm7rbFIgAz
6qe7IR1nsATzxRhDoJI3RIPlQjzhM1qEX9PBEtwW+LLieShtvMc+ijdiUw7bqNl9
RTM6hRf4fTX4jLHtxfZYZ99bHEjIseksFbSAnjKxxkt0W5EFha73VX8hjwnG24J/
XZQAhsyvpQmcZKJGZPWUSa+UFcytoauMnNdgJOQw7TcMT4Y2mMuvcoZ/KkFtDjdr
30qhp46/gml2yqnByXRfzshGQm9E4ZoqSCn+lFWAfjlrhcqdgZFKpILpwMixbdin
NgTA/pbwXovrlho8UflB0sbDMrbyV3qNGZXD/4hRg66Vm3F7ipgqPBbM89qoDniG
CXiQnmRQ+rwcftyeE7me7+kD6djYTWOfEY5HRNiCf9NhnQG8GP7YzZ4KACxJ2PwQ
R9+Egc9nAl4UG6PrEjZeud81rLzc+ws2SJLokxOcIGnid8lZidf83HfWekAmRloA
J5+tmpx5q26ug/j2uXV/rp36xaQWhjJrrnhEKamIYYAVioXa9srRhtz3qRI8r/13
mrZ5hu4le8aC/5s=
=AyIM
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20220203' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"One small SELinux patch to ensure that a policy structure field is
properly reset after freeing so that we don't inadvertently do a
double-free on certain error conditions"
* tag 'selinux-pr-20220203' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix double free of cond_list on error paths
Commit c2426d2ad5 ("ima: added support for new kernel cmdline parameter
ima_template_fmt") introduced an additional check on the ima_template
variable to avoid multiple template selection.
Unfortunately, ima_template could be also set by the setup function of the
ima_hash= parameter, when it calls ima_template_desc_current(). This causes
attempts to choose a new template with ima_template= or with
ima_template_fmt=, after ima_hash=, to be ignored.
Achieve the goal of the commit mentioned with the new static variable
template_setup_done, so that template selection requests after ima_hash=
are not ignored.
Finally, call ima_init_template_list(), if not already done, to initialize
the list of templates before lookup_template_desc() is called.
Reported-by: Guo Zihua <guozihua@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org
Fixes: c2426d2ad5 ("ima: added support for new kernel cmdline parameter ima_template_fmt")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Linus Torvalds
Roberto Sassu
Eric Snowberg
Dave Kleikamp
Andreas Rammhold
Eric Biggers
Petr Machata
Nicolai Stange
Paul Moore
Roopa Prabhu
Casey Schaufler
Richard Haines
Arnd Bergmann
Jakub Kicinski
Randy Dunlap
Ondrej Mosnacek
Yael Tzur
Christian Göttsche
Jens Wiklander
Mimi Zohar
Stefan Berger
Austin Kim
Kees Cook