Граф коммитов

10 Коммитов

Автор SHA1 Сообщение Дата
Matti Vaittinen 316d0d92fb mfd: bd718x7: simplify by cleaning unnecessary device data
Most ROHM PMIC sub-devices only use the regmap pointer from
parent device. They can obtain this by dev_get_regamap so in
most cases the MFD device does not need to allocate and populate
the driver data. Simplify drivers by removing this.

The BD70528 still needs the access to watchdog mutex so keep
rohm_regmap_dev in use on BD70528 RTC and WDG drivers for now.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14 10:17:53 +01:00
Matti Vaittinen 8c352e68dd mfd: bd718x7: Add compatible for BD71850
ROHM BD71850 PMIC is almost identical to BD71847. Main difference is some
initial voltage values for regulators. The BD71850 can be handled by
BD71847 driver but adding own compatible makes it clearer for one who
creates the DT for board containing this PMIC and allows SW to be
differentiating PMICs if needed.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24 07:22:31 +00:00
Matti Vaittinen 1b1c26b24a mfd: Rohm PMICs: Use platform_device_id to match MFD sub-devices
Thanks to Stephen Boyd I today learned we can use platform_device_id
to do device and module matching for MFD sub-devices!

Do device matching using the platform_device_id instead of using
explicit module_aliases to load modules and custom parent-data field
to do module loading and sub-device matching.

Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24 07:21:48 +00:00
Leonard Crestez e25547f899 mfd: bd718x7: Make power button press duration configurable
Allow overwriting the values in BD718XX_REG_PWRONCONFIG0 and
BD718XX_REG_PWRONCONFIG1 via devicetree. Read values in milliseconds and
attempt to round them to something supported by the hardware.

Keep existing values (from bootloader or OTP) if property is not
present.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
[Lee: Fixed-up merge/API conflict]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-02 12:11:31 +01:00
Leonard Crestez 2a87f09020 mfd: bd718x7: Remove hardcoded config for button press duration
The reset button on imx8mm-evk is tied to PWRON_B pin of bd71847 and the
long press duration is set to zero from OTP. The linux driver overrides
those values and breaks reset from button.

Overwriting OTP or bootloader configuration with some hardcoded defaults
is not desirable, keep already programmed values instead.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-02 12:11:31 +01:00
Matti Vaittinen 2a6a7aacd4 mfd: regulator: clk: Split rohm-bd718x7.h
Split the bd718x7.h to ROHM common and bd718x7 specific parts
so that we do not need to add same things in every new ROHM
PMIC header. Please note that this change requires changes also
in bd718x7 sub-device drivers for regulators and clk.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27 10:56:27 +01:00
Matti Vaittinen eb108c3611
regulator: bd718xx: fix build warning on x86_64
Casting address to unsigned int causes a warning on some 64 bit
architectures. Fix the cast.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-02 15:58:11 +01:00
Matti Vaittinen dd2be639f4
regulator/mfd: bd718xx: rename bd71837/bd71847 common instances
Rename parts of code that support both BD71837 and BD71847 to BD718XX.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-28 14:57:04 +01:00
Matti Vaittinen 494edd266b
regulator/mfd: Support ROHM BD71847 power management IC
BD71847 is reduced version of BD71837. DVS bucks 3 and 4 are
removed as is LDO7. Voltage ranges of some regulators are
expanded.

Add initial support for BD71847 with BD71837 driver.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-28 14:56:46 +01:00
Matti Vaittinen 30107fa690 mfd: bd71837: Core driver for ROHM BD71837 PMIC
ROHM BD71837 PMIC MFD driver providing interrupts and support
for three subsystems:
- clk
- Regulators
- input/power-key

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-08-16 10:13:37 +01:00