The index field of cpufreq_frequency_table has been renamed to
driver_data by commit 5070158 (cpufreq: rename index as driver_data
in cpufreq_frequency_table).
This patch updates the s3c64xx driver to match.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The mechanism causing devices depending on a given power resource
(that is, devices that can be in D0 only if that power resource is
on) to be resumed automatically when the power resource is turned
on (and their "inferred" power state becomes D0 as a result) is
inherently racy and in fact unnecessary.
It is racy, because if the power resource is turned on and then
immediately off, the device resume triggered by the first transition
to "on" may still happen, causing the power resource to be turned
on again. That again will trigger the "resume of dependent devices"
mechanism, but if the devices in question are not in use, they will
be suspended in the meantime causing the power resource to be turned
off. However, the "resume of dependent devices" will next resume
them again and so on. In some cases (USB port PM in particular) that
leads to an endless busy loop of flipping the resource on and off
continuously.
It is needless, because whoever turns a power resource on will most
likely turn it off at some point and the devices that go into "D0"
as a result of turning it on will then go back into D3cold
(generally, the state they were in before).
Moreover, turning on all power resources a device needs to go into
D0 is not sufficient for a full transition into D0 in general.
Namely, _PS0 may need to be executed in addition to that in some
cases. This means that the whole rationale of the "resume of
dependent devices" mechanism was incorrect to begin with and it's
best to remove it entirely.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The expression in line 398 of intel_pstate.c causes the following
warning to be emitted:
drivers/cpufreq/intel_pstate.c:398:3: warning: left shift count >= width of type
which happens because unsigned long is 32-bit on some architectures.
Fix that by using a helper u64 variable and simplify the code
slightly.
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rescind of subchannels were not being correctly handled. Fix the bug.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: <stable@vger.kernel.org> [3.11+]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB3503 driver had an incorrect depedency on REGMAP, instead of
REGMAP_I2C. This caused the build to fail since the necessary regmap
i2c pieces were not available.
Signed-off-by: Matthew Dawson <matthew@mjdsystems.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When CMA fails to initialize in v3.12-rc4, the chipidea driver oopses
the kernel while trying to remove and put the HCD which doesn't exist:
WARNING: CPU: 0 PID: 6 at /home/rmk/git/linux-rmk/arch/arm/mm/dma-mapping.c:511
__dma_alloc+0x200/0x240()
coherent pool not initialised!
Modules linked in:
CPU: 0 PID: 6 Comm: kworker/u2:0 Tainted: G W 3.12.0-rc4+ #56
Workqueue: deferwq deferred_probe_work_func
Backtrace:
[<c001218c>] (dump_backtrace+0x0/0x10c) from [<c0012328>] (show_stack+0x18/0x1c)
r6:c05fd9cc r5:000001ff r4:00000000 r3:df86ad00
[<c0012310>] (show_stack+0x0/0x1c) from [<c05f3a4c>] (dump_stack+0x70/0x8c)
[<c05f39dc>] (dump_stack+0x0/0x8c) from [<c00230a8>] (warn_slowpath_common+0x6c/0x8c)
r4:df883a60 r3:df86ad00
[<c002303c>] (warn_slowpath_common+0x0/0x8c) from [<c002316c>] (warn_slowpath_fmt+0x38/0x40)
r8:ffffffff r7:00001000 r6:c083b808 r5:00000000 r4:df2efe80
[<c0023134>] (warn_slowpath_fmt+0x0/0x40) from [<c00196bc>] (__dma_alloc+0x200/0x240)
r3:00000000 r2:c05fda00
[<c00194bc>] (__dma_alloc+0x0/0x240) from [<c001982c>] (arm_dma_alloc+0x88/0xa0)
[<c00197a4>] (arm_dma_alloc+0x0/0xa0) from [<c03e2904>] (ehci_setup+0x1f4/0x438)
[<c03e2710>] (ehci_setup+0x0/0x438) from [<c03cbd60>] (usb_add_hcd+0x18c/0x664)
[<c03cbbd4>] (usb_add_hcd+0x0/0x664) from [<c03e89f4>] (host_start+0xf0/0x180)
[<c03e8904>] (host_start+0x0/0x180) from [<c03e7c34>] (ci_hdrc_probe+0x360/0x670
)
r6:df2ef410 r5:00000000 r4:df2c3010 r3:c03e8904
[<c03e78d4>] (ci_hdrc_probe+0x0/0x670) from [<c0311044>] (platform_drv_probe+0x20/0x24)
[<c0311024>] (platform_drv_probe+0x0/0x24) from [<c030fcac>] (driver_probe_device+0x9c/0x234)
...
---[ end trace c88ccaf3969e8422 ]---
Unable to handle kernel NULL pointer dereference at virtual address 00000028
pgd = c0004000
[00000028] *pgd=00000000
Internal error: Oops: 17 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 6 Comm: kworker/u2:0 Tainted: G W 3.12.0-rc4+ #56
Workqueue: deferwq deferred_probe_work_func
task: df86ad00 ti: df882000 task.ti: df882000
PC is at usb_remove_hcd+0x10/0x150
LR is at host_stop+0x1c/0x3c
pc : [<c03cacec>] lr : [<c03e88e4>] psr: 60000013
sp : df883b50 ip : df883b78 fp : df883b74
r10: c11f4c54 r9 : c0836450 r8 : df30c400
r7 : fffffff4 r6 : df2ef410 r5 : 00000000 r4 : df2c3010
r3 : 00000000 r2 : 00000000 r1 : df86b0a0 r0 : 00000000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 10c53c7d Table: 2f29404a DAC: 00000015
Process kworker/u2:0 (pid: 6, stack limit = 0xdf882240)
Stack: (0xdf883b50 to 0xdf884000)
...
Backtrace:
[<c03cacdc>] (usb_remove_hcd+0x0/0x150) from [<c03e88e4>] (host_stop+0x1c/0x3c)
r6:df2ef410 r5:00000000 r4:df2c3010
[<c03e88c8>] (host_stop+0x0/0x3c) from [<c03e8aa0>] (ci_hdrc_host_destroy+0x1c/0x20)
r5:00000000 r4:df2c3010
[<c03e8a84>] (ci_hdrc_host_destroy+0x0/0x20) from [<c03e7c80>] (ci_hdrc_probe+0x3ac/0x670)
[<c03e78d4>] (ci_hdrc_probe+0x0/0x670) from [<c0311044>] (platform_drv_probe+0x20/0x24)
[<c0311024>] (platform_drv_probe+0x0/0x24) from [<c030fcac>] (driver_probe_device+0x9c/0x234)
[<c030fc10>] (driver_probe_device+0x0/0x234) from [<c030ff28>] (__device_attach+0x44/0x48)
...
---[ end trace c88ccaf3969e8423 ]---
Fix this so at least we can continue booting and get to a shell prompt.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some USB drive enclosures do not correctly report an
overflow condition if they hold a drive with a capacity
over 2TB and are confronted with a READ_CAPACITY_10.
They answer with their capacity modulo 2TB.
The generic layer cannot cope with that. It must be told
to use READ_CAPACITY_16 from the beginning.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Interface 6 of this device speaks QMI as per tests done by us.
Credits go to Antonella for providing the hardware.
Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Antonella Pellizzari <anto.pellizzari83@gmail.com>
Tested-by: Dan Williams <dcbw@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Due to missing braces on an if statement, in presence of a device_node a
port was always assigned -1, regardless of any alias entries in the
device tree. Conversely, if device_node was NULL, an unitialized port
ended up being used.
This patch adds the missing braces, fixing the issues.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Use unsigned types consistently for handling comedi sample data and also
for the USB data buffers.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Use unsigned types consistently for handling comedi sample data and also
for the USB data buffers.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Use unsigned types consistently in the "s626" module when dealing with
sample values.
Rewrite `s626_reg_to_uint()` as it can be done with a one-liner.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Use unsigned types for sample value manipulations in the "rtd520" driver
for consistency.
Also replace the hand-coded munging of 2's complement sample values with
calls to `comedi_offset_munge()` and AND with `s->maxdata` to strip off
any extra sign bits.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Change `daqp_interrupt()` to use unsigned sample values for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Change `pcmuio_handle_intr_subdev()` in the "pcmuio" module to use
unsigned sample values for consistency.
Also, make the order in which `pcmuio_handle_intr_subdev()` writes the
two sample values (each actually containing up to 16 1-bit sample
values) independent of the host byte ordering.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Change `interrupt_pcmmio()` and `ai_rinsn()` in the "pcmmio" module to
use unsigned sample values for consistency.
Also, make the order in which `interrupt_pcmmio()` writes the two sample
values (each actually containing up to 16 1-bit sample values)
independent of the host byte ordering.
Note that this module is a mess, so please excuse the checkpatch
warnings.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Change the interrupt data transfer functions in the "pcl818" module to
use unsigned types for consistency.
Also remove the `short *ai_data` member of `struct pcl818_private` as it
is only assigned to and otherwise unused.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Change the "pcl816" module to use unsigned types to handle samples for
consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Change `transfer_from_dma_buf()` and `interrupt_pcl812_ai_dma()` in the
"pcl812" module to use `unsigned short` sample values for consistency.
Also remove the `short *ai_data` member of `struct pcl812_private` as it
is only assigned to.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Don't cast the sample value parameter of `comedi_buf_put()` to `short`,
particularly as it has now been changed to `unsigned short`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Change `nidio_interrupt()` to use unsigned types for sample values
(actually bit-vectors of 1-bit sample values) instead of signed types.
Also rename the `AuxData` variable to `auxdata` and change it from
`long` to `unsigned int` as it only needs to hold a 32-bit value.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Change the element type of the `ai_fifo_buffer[]` element of `struct
ni_board_struct` and the types of various local variables from `short`
to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Change the type of the `data` variable in `labpc_ai_cmd()` from `short`
to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented by unsigned values.
Change the type of the `dma_buffer` member of `struct a2150_private`
from `s16 *` to `uint16_t *`, and change the type of the `dpnt` variable
in `a2150_interrupt()` to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Change the types of various variables in the "me4000" driver dealing
with samples to use unsigned types for consistency.
Also replace the `long` or `unsigned long` variables used to handle
32-bit register values to `unsigned int`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Change the element type of the `ao_data[]` member of `struct
icp_multi_private` from `short` to `unsigned short` for consistency.
Also remove the `ai_data` and `di_data` members as they are not used.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Change the element type of the `ao_readback[]` member of `struct
fl512_private` from `short` to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Change the type of the `data` variable in `dt3k_ai_empty_fifo()` from
`short` to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Change various members of `struct dt282x_private` and various parameters
and variables dealing with samples to use `unsigned short` instead of
`short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented by unsigned values.
Change the type of the `ao_update_bits` member of `struct
das1800_private` and the types of various local variables used to hold
sample values from `short` to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Change the element type of the `ai_buffer[]` member of `struct
das16m1_private_struct` and the types used by `munge_sample()` and
`munge_sample_array()` from `short` to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Change the type of the `data` variable in `das16_ai_munge()` from `short
*` to `unsigned short *` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are unsigned. Change the element type of
`ao_bounce_buffer[]` in `struct pcidas64_private` from `short` to
`unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented by unsigned values.
Change the element types of `ai_buffer[]`, `ao_buffer[]` and
`ao_value[]` in `struct cb_pcidas_private` to `unsigned short` for
consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Replace all uses of `short` to handle sample values in the
"amplc_pci230" driver with `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Change the type of the `ao_scan_vals` member of `struct pci224_private`
from `short *` to `unsigned short *` for consistency. Also change the
type of the `array` variable in `pci224_ao_munge()` from `short *` to
`unsigned short *`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Change the element type of the `ao_data[]` member of `struct
pci1723_private` from `short` to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Change the element type of the `ao_data[]` member of `struct
pci1710_private` from `short` to `unsigned short` for consistency. Also
remove the `ai_data` member as it is only assigned to. Change various
local variables used to hold sample values to `unsigned short`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Change the `ao_data[]` and `dmabuf_virt[]` members of `struct
pci9118_private` and various local variables dealing with sample values
to use `unsigned short` instead of `short` for consistency.
Also remove the `short *ai_data` member of `struct pci9118_private` as
it is only assigned to.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Change the element type of the `ai_bounce_buffer[]` member of `struct
pci9111_private_data` from `short` to `unsigned short` for consistency.
Also change the type of the `array` variable in `pci9111_ai_munge()`
from `short *` to `unsigned short *`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
Change the element type of `ul_DmaBufferVirtual[2]` in `struct
addi_private` from `short *` to `unsigned short *` for consistency.
Note that several ADDI-DATA drivers use this struct from
"addi_common.h", but only the "addi_apci_3120" driver uses this member.
Also change the type of the `dma_buffer` parameter of
`v_APCI3120_InterruptDmaMoveBlock16bit()` from `short *` to `unsigned
short *`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
`subdev_8255_interrupt()` calls `comedi_buf_put()` with a `short` data
value merely because that's what was previously expected. Since it now
expects an `unsigned short`, change it here for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
`cfc_write_to_buffer()` in "comedi_fc.h" currently uses `short` to hold
a 16-bit sample value to be written to the buffer. Change the type of
the parameter to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sample values in comedi are generally represented as unsigned values.
`comedi_buf_put()` and `comedi_buf_get()` use a `short` to hold the
16-bit data value being transferred to or from the comedi buffer.
Change them to use `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set the two TX fall back rates in s_bPacketToWirelessUsb and
pass to private area of driver in variables tx_rate_fb0
and tx_rate_fb1 from the wFB_Opt0/wFB_Opt1 array.
Apply these rates were needed in the TX structure and
remove byFBOption settings in s_uGetRTSCTSDuration.
This greatly simplifies s_uGetRTSCTSDuration and
more future flexibility of setting rates from
upper levels of driver.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The functionality implemented by iio_sw_buffer_preenable() is now done directly
in the IIO core and previous users of iio_sw_buffer_preenable() have all been
updated to not use it anymore. It is unused now and can be remove.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The equivalent of iio_sw_buffer_preenable() is now done in the IIO buffer core,
so there is no need to do this from the driver anymore.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Charles Keepax
Rafael J. Wysocki
K. Y. Srinivasan
Matthew Dawson
Russell King - ARM Linux
Oliver Neukum
Enrico Mioso
Roel Kluin
Ian Abbott
Malcolm Priestley
Lars-Peter Clausen