Граф коммитов

28 Коммитов

Автор SHA1 Сообщение Дата
Li Dongyang fe18d64989 ext4: don't mark mmp buffer head dirty
Marking mmp bh dirty before writing it will make writeback
pick up mmp block later and submit a write, we don't want the
duplicate write as kmmpd thread should have full control of
reading and writing the mmp block.
Another reason is we will also have random I/O error on
the writeback request when blk integrity is enabled, because
kmmpd could modify the content of the mmp block(e.g. setting
new seq and time) while the mmp block is under I/O requested
by writeback.

Signed-off-by: Li Dongyang <dongyangli@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@vger.kernel.org
2018-09-15 17:11:25 -04:00
Arnd Bergmann af123b3718 ext4: use 64-bit timestamps for mmp_time
The mmp_time field is 64 bits wide, which is good, but calling
get_seconds() results in a 32-bit value on 32-bit architectures. Using
ktime_get_real_seconds() instead returns 64 bits everywhere.

Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-07-29 15:49:00 -04:00
Theodore Ts'o 2dca60d98e ext4: clear mmp sequence number when remounting read-only
Previously, when an MMP-protected file system is remounted read-only,
the kmmpd thread would exit the next time it woke up (a few seconds
later), without resetting the MMP sequence number back to
EXT4_MMP_SEQ_CLEAN.

Fix this by explicitly killing the MMP thread when the file system is
remounted read-only.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Andreas Dilger <adilger@dilger.ca>
2018-07-08 19:36:02 -04:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Linus Torvalds 0f0d12728e Merge branch 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount flag updates from Al Viro:
 "Another chunk of fmount preparations from dhowells; only trivial
  conflicts for that part. It separates MS_... bits (very grotty
  mount(2) ABI) from the struct super_block ->s_flags (kernel-internal,
  only a small subset of MS_... stuff).

  This does *not* convert the filesystems to new constants; only the
  infrastructure is done here. The next step in that series is where the
  conflicts would be; that's the conversion of filesystems. It's purely
  mechanical and it's better done after the merge, so if you could run
  something like

	list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$')

	sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \
	        -e 's/\<MS_NOSUID\>/SB_NOSUID/g' \
	        -e 's/\<MS_NODEV\>/SB_NODEV/g' \
	        -e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \
	        -e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \
	        -e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \
	        -e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \
	        -e 's/\<MS_NOATIME\>/SB_NOATIME/g' \
	        -e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \
	        -e 's/\<MS_SILENT\>/SB_SILENT/g' \
	        -e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \
	        -e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \
	        -e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \
	        -e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \
	        $list

  and commit it with something along the lines of 'convert filesystems
  away from use of MS_... constants' as commit message, it would save a
  quite a bit of headache next cycle"

* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  VFS: Differentiate mount flags (MS_*) from internal superblock flags
  VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
  vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
2017-09-14 18:54:01 -07:00
Markus Elfring d695a1bea3 ext4: use sizeof(*ptr)
Replace the specification of data structures by pointer dereferences
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
2017-08-24 13:50:24 -04:00
David Howells bc98a42c1f VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
Firstly by applying the following with coccinelle's spatch:

	@@ expression SB; @@
	-SB->s_flags & MS_RDONLY
	+sb_rdonly(SB)

to effect the conversion to sb_rdonly(sb), then by applying:

	@@ expression A, SB; @@
	(
	-(!sb_rdonly(SB)) && A
	+!sb_rdonly(SB) && A
	|
	-A != (sb_rdonly(SB))
	+A != sb_rdonly(SB)
	|
	-A == (sb_rdonly(SB))
	+A == sb_rdonly(SB)
	|
	-!(sb_rdonly(SB))
	+!sb_rdonly(SB)
	|
	-A && (sb_rdonly(SB))
	+A && sb_rdonly(SB)
	|
	-A || (sb_rdonly(SB))
	+A || sb_rdonly(SB)
	|
	-(sb_rdonly(SB)) != A
	+sb_rdonly(SB) != A
	|
	-(sb_rdonly(SB)) == A
	+sb_rdonly(SB) == A
	|
	-(sb_rdonly(SB)) && A
	+sb_rdonly(SB) && A
	|
	-(sb_rdonly(SB)) || A
	+sb_rdonly(SB) || A
	)

	@@ expression A, B, SB; @@
	(
	-(sb_rdonly(SB)) ? 1 : 0
	+sb_rdonly(SB)
	|
	-(sb_rdonly(SB)) ? A : B
	+sb_rdonly(SB) ? A : B
	)

to remove left over excess bracketage and finally by applying:

	@@ expression A, SB; @@
	(
	-(A & MS_RDONLY) != sb_rdonly(SB)
	+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
	|
	-(A & MS_RDONLY) == sb_rdonly(SB)
	+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
	)

to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-07-17 08:45:34 +01:00
Christoph Hellwig 70fd76140a block,fs: use REQ_* flags directly
Remove the WRITE_* and READ_SYNC wrappers, and just use the flags
directly.  Where applicable this also drops usage of the
bio_set_op_attrs wrapper.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-01 09:43:26 -06:00
Mike Christie 2a222ca992 fs: have submit_bh users pass in op and flags separately
This has submit_bh users pass in the operation and flags separately,
so submit_bh_wbc can setup the bio op and bi_rw flags on the bio that
is submitted.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Jakub Wilk 8d2ae1cbe8 ext4: remove trailing \n from ext4_warning/ext4_error calls
Messages passed to ext4_warning() or ext4_error() don't need trailing
newlines, because these function add the newlines themselves.

Signed-off-by: Jakub Wilk <jwilk@jwilk.net>
2016-04-27 01:11:21 -04:00
vikram.jadhav07 0304688676 ext4: clean up error handling in the MMP support
There is memory leak as both caller function kmmpd() and callee
read_mmp_block() not releasing bh_check  (i.e buffer_head).
Given patch fixes this problem.

[ Additional changes suggested by Andreas Dilger -- TYT ]

Signed-off-by: Jadhav Vikram <vikramjadhavpucsd2007@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-03-13 17:56:52 -04:00
Darrick J. Wong 6a797d2737 ext4: call out CRC and corruption errors with specific error codes
Instead of overloading EIO for CRC errors and corrupt structures,
return the same error codes that XFS returns for the same issues.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-10-17 16:16:04 -04:00
Dan Carpenter da0b5e40ab ext4: silence a format string false positive
Static checkers complain that the format string should be "%s".  It does
not make a difference for the current code.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-08-15 11:38:13 -04:00
Dan Carpenter 9810446836 ext4: simplify some code in read_mmp_block()
My static check complains because we have:

	if (!*bh)
		return -ENOMEM;
	if (*bh) {

The second check is unnecessary.

I've simplified this code by moving the "if (!*bh)" checks around.  Also
Andreas Dilger says we should probably print a warning if sb_getblk()
fails.

[ Restructured the code so that we print a warning message as well if
  the mmp block doesn't check out, and to print the error code to
  disambiguate between the error cases.  - TYT ]

Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-08-15 11:30:31 -04:00
Dmitry Monakhov 9aa5d32ba2 ext4: Replace open coded mdata csum feature to helper function
Besides the fact that this replacement improves code readability
it also protects from errors caused direct EXT4_S(sb)->s_es manipulation
which may result attempt to use uninitialized  csum machinery.

#Testcase_BEGIN
IMG=/dev/ram0
MNT=/mnt
mkfs.ext4 $IMG
mount $IMG $MNT
#Enable feature directly on disk, on mounted fs
tune2fs -O metadata_csum  $IMG
# Provoke metadata update, likey result in OOPS
touch $MNT/test
umount $MNT
#Testcase_END

# Replacement script
@@
expression E;
@@
- EXT4_HAS_RO_COMPAT_FEATURE(E, EXT4_FEATURE_RO_COMPAT_METADATA_CSUM)
+ ext4_has_metadata_csum(E)

https://bugzilla.kernel.org/show_bug.cgi?id=82201

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2014-10-13 03:36:16 -04:00
Stephen Hemminger c197855ea1 ext4: make local functions static
I have been running make namespacecheck to look for unneeded globals, and
found these in ext4.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-05-12 10:50:23 -04:00
Theodore Ts'o dd1f723bf5 ext4: use prandom_u32() instead of get_random_bytes()
Many of the uses of get_random_bytes() do not actually need
cryptographically secure random numbers.  Replace those uses with a
call to prandom_u32(), which is faster and which doesn't consume
entropy from the /dev/random driver.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-11-08 00:14:53 -05:00
Theodore Ts'o 9f203507ed ext4: mark all metadata I/O with REQ_META
As Dave Chinner pointed out at the 2013 LSF/MM workshop, it's
important that metadata I/O requests are marked as such to avoid
priority inversions caused by I/O bandwidth throttling.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-20 15:46:17 -04:00
Dmitry Monakhov 171a7f21a7 ext4: fix big-endian bug in metadata checksum calculations
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2013-04-09 23:56:48 -04:00
Wang Shilong aebf02430d ext4: use unlikely to improve the efficiency of the kernel
Because the function 'sb_getblk' seldomly fails to return NULL
value,it will be better to use 'unlikely' to optimize it.

Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-01-12 16:28:47 -05:00
Theodore Ts'o 860d21e2c5 ext4: return ENOMEM if sb_getblk() fails
The only reason for sb_getblk() failing is if it can't allocate the
buffer_head.  So ENOMEM is more appropriate than EIO.  In addition,
make sure that the file system is marked as being inconsistent if
sb_getblk() fails.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2013-01-12 16:19:36 -05:00
Jan Kara 8e8ad8a57c ext4: Convert to new freezing mechanism
We remove most of frozen checks since upper layer takes care of blocking all
writes. We have to handle protection in ext4_page_mkwrite() in a special way
because we cannot use generic block_page_mkwrite(). Also we add a freeze
protection to ext4_evict_inode() so that iput() of unlinked inode cannot modify
a frozen filesystem (we cannot easily instrument ext4_journal_start() /
ext4_journal_stop() with freeze protection because we are missing the
superblock pointer in ext4_journal_stop() in nojournal mode).

CC: linux-ext4@vger.kernel.org
CC: "Theodore Ts'o" <tytso@mit.edu>
BugLink: https://bugs.launchpad.net/bugs/897421
Tested-by: Kamal Mostafa <kamal@canonical.com>
Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com>
Tested-by: Dann Frazier <dann.frazier@canonical.com>
Tested-by: Massimo Morana <massimo.morana@canonical.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-31 09:45:48 +04:00
Darrick J. Wong 5c359a47e7 ext4: add checksums to the MMP block
Compute and verify a checksum for the MMP block.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-04-29 18:47:10 -04:00
Santosh Nayak 85d216501a ext4: Fix endianness bug when reading the MMP block
Sparse complained about this endian bug in fs/ext4/mmp.c.

Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Reviewed-by: Johann Lombardi <johann@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-02-27 01:09:03 -05:00
Darrick J. Wong f6f96fdb8c ext4: Fix comparison endianness problem in MMP initialization
As part of startup, the MMP initialization code does this:

mmp->mmp_seq = seq = cpu_to_le32(mmp_new_seq());

Next, mmp->mmp_seq is written out to disk, a delay happens, and then
the MMP block is read back in and the sequence value is tested:

if (seq != le32_to_cpu(mmp->mmp_seq)) {
	/* fail the mount */

On a LE system such as x86, the *le32* functions do nothing and this
works.  Unfortunately, on a BE system such as ppc64, this comparison
becomes:

if (cpu_to_le32(new_seq) != le32_to_cpu(cpu_to_le32(new_seq)) {
	/* fail the mount */

Except for a few palindromic sequence numbers, this test always causes
the mount to fail, which makes MMP filesystems generally unmountable
on ppc64.  The attached patch fixes this situation.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-18 10:53:51 -04:00
Nikitas Angelinas bdfc230f33 ext4: MMP: fix error message rate-limiting logic in kmmpd
Current logic would print an error message only once, and then
'failed_writes' would stay at 1.  Rework the loop to increment
'failed_writes' and print the error message every
s_mmp_update_interval * 60 seconds, as intended according to the
comment.

Signed-off-by: Nikitas Angelinas <nikitas_angelinas@xyratex.com>
Signed-off-by: Andrew Perepechko <andrew_perepechko@xyratex.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Andreas Dilger <adilger@dilger.ca>
2011-10-18 10:51:51 -04:00
Nikitas Angelinas 215fc6af73 ext4: MMP: kmmpd should use nodename from init_uts_ns.name, not sysname
sysname holds "Linux" by default, i.e. what appears when doing a "uname
-s"; nodename should be used to print the machine's hostname, i.e. what
is returned when doing a "uname -n" or "hostname", and what
gethostname(2)/sethostname(2) manipulate, in order to notify the
administrator of the node which is contending to mount the filesystem.

Acked-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Nikitas Angelinas <nikitas_angelinas@xyratex.com>
Signed-off-by: Andrew Perepechko <andrew_perepechko@xyratex.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-18 10:49:51 -04:00
Johann Lombardi c5e06d101a ext4: add support for multiple mount protection
Prevent an ext4 filesystem from being mounted multiple times.
A sequence number is stored on disk and is periodically updated (every 5
seconds by default) by a mounted filesystem.
At mount time, we now wait for s_mmp_update_interval seconds to make sure
that the MMP sequence does not change.
In case of failure, the nodename, bdevname and the time at which the MMP
block was last updated is displayed.

Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Johann Lombardi <johann@whamcloud.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-05-24 18:31:25 -04:00