Use PathConsumed field when parsing prefixes of referral paths that
either match a cache entry or are a complete prefix path of an
existing entry.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
They were identical execpt to CIFSTCon() vs. SMB2_tcon().
These are also available via ops->tree_connect().
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ 1145308
Some very old server may not support SetPathInfo to adjust the timestamps
of directories. For these servers, try to open the directory and use SetFileInfo.
Minor correction to patch included that was
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Tested-by: Kenneth D'souza <kdsouza@redhat.com>
If server returns ERRBaduid but does not reset transport connection,
we'll keep sending command with a non-valid UID for the server as long
as transport is healthy, without actually recovering. This have been
observed on the field.
This patch adds ERRBaduid handling so that we set CifsNeedReconnect.
map_and_check_smb_error() can be modified to extend use cases.
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Currently idsfromsid mount option allows querying owner information from the
special sids used to represent POSIX uids and gids but needed changes to
populate the security descriptor context with the owner information when
idsfromsid mount option was used.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Adds support for better query info on dentry revalidation (using
the SMB3.1.1 POSIX extensions level 100). Followon patch will
add support for translating the UID/GID from the SID and also
will add support for using the posix query info on lookup.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
first steps in trying to make channels properly reconnect.
* add cifs_ses_find_chan() function to find the enclosing cifs_chan
struct it belongs to
* while we have the session lock and are redoing negprot and
sess.setup in smb2_reconnect() redo the binding of channels.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Move the channel (TCP_Server_Info*) selection from the tranport
layer to higher in the call stack so that:
- credit handling is done with the server that will actually be used
to send.
* ->wait_mtu_credit
* ->set_credits / set_credits
* ->add_credits / add_credits
* add_credits_and_wake_if
- potential reconnection (smb2_reconnect) done when initializing a
request is checked and done with the server that will actually be
used to send.
To do this:
- remove the cifs_pick_channel() call out of compound_send_recv()
- select channel and pass it down by adding a cifs_pick_channel(ses)
call in:
- smb311_posix_mkdir
- SMB2_open
- SMB2_ioctl
- __SMB2_close
- query_info
- SMB2_change_notify
- SMB2_flush
- smb2_async_readv (if none provided in context param)
- SMB2_read (if none provided in context param)
- smb2_async_writev (if none provided in context param)
- SMB2_write (if none provided in context param)
- SMB2_query_directory
- send_set_info
- SMB2_oplock_break
- SMB311_posix_qfs_info
- SMB2_QFS_info
- SMB2_QFS_attr
- smb2_lockv
- SMB2_lease_break
- smb2_compound_op
- smb2_set_ea
- smb2_ioctl_query_info
- smb2_query_dir_first
- smb2_query_info_comound
- smb2_query_symlink
- cifs_writepages
- cifs_write_from_iter
- cifs_send_async_read
- cifs_read
- cifs_readpages
- add TCP_Server_Info *server param argument to:
- cifs_send_recv
- compound_send_recv
- SMB2_open_init
- SMB2_query_info_init
- SMB2_set_info_init
- SMB2_close_init
- SMB2_ioctl_init
- smb2_iotcl_req_init
- SMB2_query_directory_init
- SMB2_notify_init
- SMB2_flush_init
- build_qfs_info_req
- smb2_hdr_assemble
- smb2_reconnect
- fill_small_buf
- smb2_plain_req_init
- __smb2_plain_req_init
The read/write codepath is different than the rest as it is using
pages, io iterators and async calls. To deal with those we add a
server pointer in the cifs_writedata/cifs_readdata/cifs_io_parms
context struct and set it in:
- cifs_writepages (wdata)
- cifs_write_from_iter (wdata)
- cifs_readpages (rdata)
- cifs_send_async_read (rdata)
The [rw]data->server pointer is eventually copied to
cifs_io_parms->server to pass it down to SMB2_read/SMB2_write.
If SMB2_read/SMB2_write is called from a different place that doesn't
set the server field it will pick a channel.
Some places do not pick a channel and just use ses->server or
cifs_ses_server(ses). All cifs_ses_server(ses) calls are in codepaths
involving negprot/sess.setup.
- SMB2_negotiate (binding channel)
- SMB2_sess_alloc_buffer (binding channel)
- SMB2_echo (uses provided one)
- SMB2_logoff (uses master)
- SMB2_tdis (uses master)
(list not exhaustive)
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This commit moves channel picking code in separate function.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use pr_fmt to standardize all logging for fs/cifs.
Some logging output had no CIFS: specific prefix.
Now all output has one of three prefixes:
o CIFS:
o CIFS: VFS:
o Root-CIFS:
Miscellanea:
o Convert printks to pr_<level>
o Neaten macro definitions
o Remove embedded CIFS: prefixes from formats
o Convert "illegal" to "invalid"
o Coalesce formats
o Add missing '\n' format terminations
o Consolidate multiple cifs_dbg continuations into single calls
o More consistent use of upper case first word output logging
o Multiline statement argument alignment and wrapping
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In order to support reconnect to hostnames that resolve to same ip
address, besides relying on the currently set hostname to match DFS
targets, attempt to resolve the targets and then match their addresses
with the reconnected server ip address.
For instance, if we have two hostnames "FOO" and "BAR", and both
resolve to the same ip address, we would be able to handle failover in
DFS paths like
\\FOO\dfs\link1 -> [ \BAZ\share2 (*), \BAR\share1 ]
\\FOO\dfs\link2 -> [ \BAZ\share2 (*), \FOO\share1 ]
so when "BAZ" is no longer accessible, link1 and link2 would get
reconnected despite having different target hostnames.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For the case where we have a DFS path like below and we're currently
connected to targetA:
//dfsroot/link -> //targetA/share/foo, //targetB/share/bar
after failover, we should make sure to update cifs_sb->prepath so the
next operations will use the new prefix path "/bar".
Besides, in order to simplify the use of different prefix paths,
enforce CIFS_MOUNT_USE_PREFIX_PATH for DFS mounts so we don't have to
revalidate the root dentry every time we set a new prefix path.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
To rename a file in SMB2 we open it with the DELETE access and do a
special SetInfo on it. If the handle is missing the DELETE bit the
server will fail the SetInfo with STATUS_ACCESS_DENIED.
We currently try to reuse any existing opened handle we have with
cifs_get_writable_path(). That function looks for handles with WRITE
access but doesn't check for DELETE, making rename() fail if it finds
a handle to reuse. Simple reproducer below.
To select handles with the DELETE bit, this patch adds a flag argument
to cifs_get_writable_path() and find_writable_file() and the existing
'bool fsuid_only' argument is converted to a flag.
The cifsFileInfo struct only stores the UNIX open mode but not the
original SMB access flags. Since the DELETE bit is not mapped in that
mode, this patch stores the access mask in cifs_fid on file open,
which is accessible from cifsFileInfo.
Simple reproducer:
#include <stdio.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#define E(s) perror(s), exit(1)
int main(int argc, char *argv[])
{
int fd, ret;
if (argc != 3) {
fprintf(stderr, "Usage: %s A B\n"
"create&open A in write mode, "
"rename A to B, close A\n", argv[0]);
return 0;
}
fd = openat(AT_FDCWD, argv[1], O_WRONLY|O_CREAT|O_SYNC, 0666);
if (fd == -1) E("openat()");
ret = rename(argv[1], argv[2]);
if (ret) E("rename()");
ret = close(fd);
if (ret) E("close()");
return ret;
}
$ gcc -o bugrename bugrename.c
$ ./bugrename /mnt/a /mnt/b
rename(): Permission denied
Fixes: 8de9e86c67 ("cifs: create a helper to find a writeable handle by path name")
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Add check for null cifs_sb to create_options helper
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
When "backup intent" is requested on the mount (e.g. backupuid or
backupgid mount options), the corresponding flag was missing from
some of the operations.
Change all operations to use the macro cifs_create_options() to
set the backup intent flag if needed.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When mounting with "modefromsid" mount parm most servers will require
that some default permissions are given to users in the ACL on newly
created files, files created with the new 'sd context' - when passing in
an sd context on create, permissions are not inherited from the parent
directory, so in addition to the ACE with the special SID which contains
the mode, we also must pass in an ACE allowing users to access the file
(GENERIC_ALL for authenticated users seemed like a reasonable default,
although later we could allow a mount option or config switch to make
it GENERIC_ALL for EVERYONE special sid).
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-By: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Combine the initial SMB2_Open and the first SMB2_Query_Directory in a compound.
This shaves one round-trip of each directory listing, changing it from 4 to 3
for small directories.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
When using the special SID to store the mode bits in an ACE (See
http://technet.microsoft.com/en-us/library/hh509017(v=ws.10).aspx)
which is enabled with mount parm "modefromsid" we were not
passing in the mode via SMB3 create (although chmod was enabled).
SMB3 create allows a security descriptor context to be passed
in (which is more atomic and thus preferable to setting the mode
bits after create via a setinfo).
This patch enables setting the mode bits on create when using
modefromsid mount option. In addition it fixes an endian
error in the definition of the Control field flags in the SMB3
security descriptor. It also makes the ACE type of the special
SID better match the documentation (and behavior of servers
which use this to store mode bits in SMB3 ACLs).
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
After doing mount() successfully we call cifs_try_adding_channels()
which will open as many channels as it can.
Channels are closed when the master session is closed.
The master connection becomes the first channel.
,-------------> global cifs_tcp_ses_list <-------------------------.
| |
'- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-'
(master con) (chan#1 con) (chan#2 con)
| ^ ^ ^
v '--------------------|--------------------'
cifs_ses |
- chan_count = 3 |
- chans[] ---------------------'
- smb3signingkey[]
(master signing key)
Note how channel connections don't have sessions. That's because
cifs_ses can only be part of one linked list (list_head are internal
to the elements).
For signing keys, each channel has its own signing key which must be
used only after the channel has been bound. While it's binding it must
use the master session signing key.
For encryption keys, since channel connections do not have sessions
attached we must now find matching session by looping over all sessions
in smb2_get_enc_key().
Each channel is opened like a regular server connection but at the
session setup request step it must set the
SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to.
Finally, while sending in compound_send_recv() for requests that
aren't negprot, ses-setup or binding related, use a channel by cycling
through the available ones (round-robin).
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
As we get down to the transport layer, plenty of functions are passed
the session pointer and assume the transport to use is ses->server.
Instead we modify those functions to pass (ses, server) so that we
can decouple the session from the server.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There's a deadlock that is possible and can easily be seen with
a test where multiple readers open/read/close of the same file
and a disruption occurs causing reconnect. The deadlock is due
a reader thread inside cifs_strict_readv calling down_read and
obtaining lock_sem, and then after reconnect inside
cifs_reopen_file calling down_read a second time. If in
between the two down_read calls, a down_write comes from
another process, deadlock occurs.
CPU0 CPU1
---- ----
cifs_strict_readv()
down_read(&cifsi->lock_sem);
_cifsFileInfo_put
OR
cifs_new_fileinfo
down_write(&cifsi->lock_sem);
cifs_reopen_file()
down_read(&cifsi->lock_sem);
Fix the above by changing all down_write(lock_sem) calls to
down_write_trylock(lock_sem)/msleep() loop, which in turn
makes the second down_read call benign since it will never
block behind the writer while holding lock_sem.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Suggested-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed--by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
We need to populate an ACL (security descriptor open context)
on file and directory correct. This patch passes in the
mode. Followon patch will build the open context and the
security descriptor (from the mode) that goes in the open
context.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
and convert smb2_query_path_info() to use it.
This will eliminate the need for a SMB2_Create when we already have an
open handle that can be used. This will also prevent a oplock break
in case the other handle holds a lease.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
rename() takes a path for old_file and in SMB2 we used to just create
a compound for create(old_path)/rename/close().
If we already have a writable handle we can avoid the create() and close()
altogether and just use the existing handle.
For this situation, as we avoid doing the create()
we also avoid triggering an oplock break for the existing handle.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When mounting with "modefromsid" retrieve mode bits from
special SID (S-1-5-88-3) on stat. Subsequent patch will fix
setattr (chmod) to save mode bits in S-1-5-88-3-<mode>
Note that when an ACE matching S-1-5-88-3 is not found, we
default the mode to an approximation based on the owner, group
and everyone permissions (as with the "cifsacl" mount option).
See See e.g.
https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/hh509017(v=ws.10)
Signed-off-by: Steve French <stfrench@microsoft.com>
Using strscpy is cleaner, and avoids some problems with
handling maximum length strings. Linus noticed the
original problem and Aurelien pointed out some additional
problems. Fortunately most of this is SMB1 code (and
in particular the ASCII string handling older, which
is less common).
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
As per MS-DFSC, when a DFS cache entry is expired and it is a DFS
link, then a new DFS referral must be sent to root server in order to
refresh the expired entry.
This patch ensures that all new DFS referrals for refreshing the cache
are sent to DFS root.
Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac>
Signed-off-by: Steve French <stfrench@microsoft.com>
Now we just return NULL cifsFileInfo pointer in cases we didn't find
or couldn't reopen a file. This hides errors from cifs_reopen_file()
especially retryable errors which should be handled appropriately.
Create new cifs_get_writable_file() routine that returns error codes
from cifs_reopen_file() and use it in the writeback codepath.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The reconnect might have happended after we obtained credits
and before we acquired srv_mutex. Check for that under the mutex
and retry an async operation if the reconnect is detected.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Every time after a session reconnect we don't need to account for
credits obtained in previous sessions. Introduce new struct cifs_credits
which contains both credits value and reconnect instance of the
time those credits were taken. Modify a routine that add credits
back to handle the reconnect instance by assuming zero credits
if the reconnect happened after the credits were obtained and
before we decided to add them back due to some errors during sending.
This patch fixes the MTU credits cases. The subsequent patch
will handle non-MTU ones.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
After a successful failover in cifs_reconnect(), the smb2_reconnect()
function will make sure to reconnect every tcon to new target server.
For SMB2+.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch will make use of DFS cache routines where appropriate and
do not always request a new referral from server.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
* Add new dfs_cache.[ch] files
* Add new /proc/fs/cifs/dfscache file
- dump current cache when read
- clear current cache when writing "0" to it
* Add delayed_work to periodically refresh cache entries
The new interface will be used for caching DFS referrals, as well as
supporting client target failover.
The DFS cache is a hashtable that maps UNC paths to cache entries.
A cache entry contains:
- the UNC path it is mapped on
- how much the the UNC path the entry consumes
- flags
- a Time-To-Live after which the entry expires
- a list of possible targets (linked lists of UNC paths)
- a "hint target" pointing the last known working target or the first
target if none were tried. This hint lets cifs.ko remember and try
working targets first.
* Looking for an entry in the cache is done with dfs_cache_find()
- if no valid entries are found, a DFS query is made, stored in the
cache and returned
- the full target list can be copied and returned to avoid race
conditions and looped on with the help with the
dfs_cache_tgt_iterator
* Updating the target hint to the next target is done with
dfs_cache_update_tgthint()
These functions have a dfs_cache_noreq_XXX() version that doesn't
fetches referrals if no entries are found. These versions don't
require the tcp/ses/tcon/cifs_sb parameters as a result.
Expired entries cannot be used and since they have a pretty short TTL
[1] in order for them to be useful for failover the DFS cache adds a
delayed work called periodically to keep them fresh.
Since we might not have available connections to issue the referral
request when refreshing we need to store volume_info structs with
credentials and other needed info to be able to connect to the right
server.
1: Windows defaults: 5mn for domain-based referrals, 30mn for regular
links
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
* Split and refactor the very large function cifs_mount() in multiple
functions:
- tcp, ses and tcon setup to mount_get_conns()
- tcp, ses and tcon cleanup in mount_put_conns()
- tcon tlink setup to mount_setup_tlink()
- remote path checking to is_path_remote()
* Implement 2 version of cifs_mount() for DFS-enabled builds and
non-DFS-enabled builds (CONFIG_CIFS_DFS_UPCALL).
In preparation for DFS failover support.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ 1484130
Update cifs_find_fid_lock_conflict() to recognize that
ODF locks do not conflict with eachother.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
In cifs, the timestamps are stored in memory in the cifs_fattr structure,
which uses the deprecated 'timespec' structure. Now that the VFS code
has moved on to 'timespec64', the next step is to change over the fattr
as well.
This also makes 32-bit and 64-bit systems behave the same way, and
no longer overflow the 32-bit time_t in year 2038.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
With protocol version 2.0 mounts we have seen crashes with corrupt mid
entries. Either the server->pending_mid_q list becomes corrupt with a
cyclic reference in one element or a mid object fetched by the
demultiplexer thread becomes overwritten during use.
Code review identified a race between the demultiplexer thread and the
request issuing thread. The demultiplexer thread seems to be written
with the assumption that it is the sole user of the mid object until
it calls the mid callback which either wakes the issuer task or
deletes the mid.
This assumption is not true because the issuer task can be woken up
earlier by a signal. If the demultiplexer thread has proceeded as far
as setting the mid_state to MID_RESPONSE_RECEIVED then the issuer
thread will happily end up calling cifs_delete_mid while the
demultiplexer thread still is using the mid object.
Inserting a delay in the cifs demultiplexer thread widens the race
window and makes reproduction of the race very easy:
if (server->large_buf)
buf = server->bigbuf;
+ usleep_range(500, 4000);
server->lstrp = jiffies;
To resolve this I think the proper solution involves putting a
reference count on the mid object. This patch makes sure that the
demultiplexer thread holds a reference until it has finished
processing the transaction.
Cc: stable@vger.kernel.org
Signed-off-by: Lars Persson <larper@axis.com>
Acked-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Now that we have the plumbing to pass request without an rfc1002
header all the way down to the point we write to the socket we no
longer need the smb2_send_recv() function.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Move the generation of the 4 byte length field down the stack and
generate it immediately before we start writing the data to the socket.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Use a read lease for the cached root fid so that we can detect
when the content of the directory changes (via a break) at which time
we close the handle. On next access to the root the handle will be reopened
and cached again.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
if mounting as smb3 do not allow cifs (vers=1.0) or insecure vers=2.0
mounts.
For example:
root@smf-Thinkpad-P51:~/cifs-2.6# mount -t smb3 //127.0.0.1/scratch /mnt -o username=testuser,password=Testpass1
root@smf-Thinkpad-P51:~/cifs-2.6# umount /mnt
root@smf-Thinkpad-P51:~/cifs-2.6# mount -t smb3 //127.0.0.1/scratch /mnt -o username=testuser,password=Testpass1,vers=1.0
mount: /mnt: wrong fs type, bad option, bad superblock on //127.0.0.1/scratch ...
root@smf-Thinkpad-P51:~/cifs-2.6# dmesg | grep smb3
[ 4302.200122] CIFS VFS: vers=1.0 (cifs) not permitted when mounting with smb3
root@smf-Thinkpad-P51:~/cifs-2.6# mount -t smb3 //127.0.0.1/scratch /mnt -o username=testuser,password=Testpass1,vers=3.11
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Sachin Prabhu <sprabhu@redhat.com>
Introduce a function rqst_page_get_length to return the page offset and
length for a given page in smb_rqst. This function is to be used by
following patches.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
It seems Ronnie's preamble removal broke signing.
the signing functions are called when:
A) we send a request (to sign it)
B) when we recv a response (to check the signature).
On code path A, the smb2 header is in iov[1] but on code path B, the
smb2 header is in iov[0] (and there's only one vector).
So we have different iov indexes for the smb2 header but the signing
function always use index 1. Fix this by checking the nb of io vectors
in the signing function as a hint.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add a function to allocate wdata without allocating pages for data
transfer. This gives the caller an option to pass a number of pages that
point to the data buffer to write to.
wdata is reponsible for free those pages after it's done.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
With offset defined in rdata, transport functions need to look at this
offset when reading data into the correct places in pages.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
and change the smb2 version to take heder_preamble_size into account
instead of hardcoding it as 4 bytes.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
shash and sdesc and always allocated and freed together.
* abstract this in new functions cifs_alloc_hash() and cifs_free_hash().
* make smb2/3 crypto allocation independent from each other.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
This function is similar to SendReceive2 except it does not expect
a 4 byte rfc1002 length header in the first io vector.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Paulo Alcantara
Stefan Metzmacher
Ronnie Sahlberg
Roberto Bergantinos Corpas
Steve French
Aurelien Aptel
Joe Perches
Amir Goldstein
Dave Wysochanski
Paulo Alcantara (SUSE)
Pavel Shilovsky
Paulo Alcantara
Arnd Bergmann
Lars Persson
Long Li