Граф коммитов

136 Коммитов

Автор SHA1 Сообщение Дата
Colin Cross 5516fd7b92 debug: prevent entering debug mode on panic/exception.
On non-developer devices, kgdb prevents the device from rebooting
after a panic.

Incase of panics and exceptions, to allow the device to reboot, prevent
entering debug mode to avoid getting stuck waiting for the user to
interact with debugger.

To avoid entering the debugger on panic/exception without any extra
configuration, panic_timeout is being used which can be set via
/proc/sys/kernel/panic at run time and CONFIG_PANIC_TIMEOUT sets the
default value.

Setting panic_timeout indicates that the user requested machine to
perform unattended reboot after panic. We dont want to get stuck waiting
for the user input incase of panic.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: kgdb-bugreport@lists.sourceforge.net
Cc: linux-kernel@vger.kernel.org
Cc: Android Kernel Team <kernel-team@android.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Colin Cross <ccross@android.com>
[Kiran: Added context to commit message.
panic_timeout is used instead of break_on_panic and
break_on_exception to honor CONFIG_PANIC_TIMEOUT
Modified the commit as per community feedback]
Signed-off-by: Kiran Raparthy <kiran.kumar@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19 12:39:03 -06:00
Daniel Thompson 32d375f6f2 kdb: Const qualifier for kdb_getstr's prompt argument
All current callers of kdb_getstr() can pass constant pointers via the
prompt argument. This patch adds a const qualification to make explicit
the fact that this is safe.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19 12:39:03 -06:00
Daniel Thompson fb6daa7520 kdb: Provide forward search at more prompt
Currently kdb allows the output of comamnds to be filtered using the
| grep feature. This is useful but does not permit the output emitted
shortly after a string match to be examined without wading through the
entire unfiltered output of the command. Such a feature is particularly
useful to navigate function traces because these traces often have a
useful trigger string *before* the point of interest.

This patch reuses the existing filtering logic to introduce a simple
forward search to kdb that can be triggered from the more prompt.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19 12:39:03 -06:00
Daniel Thompson ab08e464a2 kdb: Fix a prompt management bug when using | grep
Currently when the "| grep" feature is used to filter the output of a
command then the prompt is not displayed for the subsequent command.
Likewise any characters typed by the user are also not echoed to the
display. This rather disconcerting problem eventually corrects itself
when the user presses Enter and the kdb_grepping_flag is cleared as
kdb_parse() tries to make sense of whatever they typed.

This patch resolves the problem by moving the clearing of this flag
from the middle of command processing to the beginning.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19 12:39:03 -06:00
Daniel Thompson 5454388113 kdb: Remove stack dump when entering kgdb due to NMI
Issuing a stack dump feels ergonomically wrong when entering due to NMI.

Entering due to NMI is normally a reaction to a user request, either the
NMI button on a server or a "magic knock" on a UART. Therefore the
backtrace behaviour on entry due to NMI should be like SysRq-g (no stack
dump) rather than like oops.

Note also that the stack dump does not offer any information that
cannot be trivial retrieved using the 'bt' command.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19 12:39:02 -06:00
Daniel Thompson f7d4ca8bbf kdb: Avoid printing KERN_ levels to consoles
Currently when kdb traps printk messages then the raw log level prefix
(consisting of '\001' followed by a numeral) does not get stripped off
before the message is issued to the various I/O handlers supported by
kdb. This causes annoying visual noise as well as causing problems
grepping for ^. It is also a change of behaviour compared to normal usage
of printk() usage. For example <SysRq>-h ends up with different output to
that of kdb's "sr h".

This patch addresses the problem by stripping log levels from messages
before they are issued to the I/O handlers. printk() which can also
act as an i/o handler in some cases is special cased; if the caller
provided a log level then the prefix will be preserved when sent to
printk().

The addition of non-printable characters to the output of kdb commands is a
regression, albeit and extremely elderly one, introduced by commit
04d2c8c83d ("printk: convert the format for KERN_<LEVEL> to a 2 byte
pattern"). Note also that this patch does *not* restore the original
behaviour from v3.5. Instead it makes printk() from within a kdb command
display the message without any prefix (i.e. like printk() normally does).

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Joe Perches <joe@perches.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19 12:39:02 -06:00
Jason Wessel df0036d117 kdb: Fix off by one error in kdb_cpu()
There was a follow on replacement patch against the prior
"kgdb: Timeout if secondary CPUs ignore the roundup".

See: https://lkml.org/lkml/2015/1/7/442

This patch is the delta vs the patch that was committed upstream:
  * Fix an off-by-one error in kdb_cpu().
  * Replace NR_CPUS with CONFIG_NR_CPUS to tell checkpatch that we
    really want a static limit.
  * Removed the "KGDB: " prefix from the pr_crit() in debug_core.c
    (kgdb-next contains a patch which introduced pr_fmt() to this file
    to the tag will now be applied automatically).

Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19 12:39:02 -06:00
Jay Lan 1467559232 kdb: fix incorrect counts in KDB summary command output
The output of KDB 'summary' command should report MemTotal, MemFree
and Buffers output in kB. Current codes report in unit of pages.

A define of K(x) as
is defined in the code, but not used.

This patch would apply the define to convert the values to kB.
Please include me on Cc on replies. I do not subscribe to linux-kernel.

Signed-off-by: Jay Lan <jlan@sgi.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19 12:39:02 -06:00
Linus Torvalds 193934123c Surprising number of fixes this merge window :(
First two are minor fallout from the param rework which went in this merge
 window.
 
 Next three are a series which fixes a longstanding (but never previously
 reported and unlikely , so no CC stable) race between kallsyms and freeing
 the init section.
 
 Finally, a minor cleanup as our module refcount will now be -1 during
 unload.
 
 Thanks,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUwEmwAAoJENkgDmzRrbjx77kP/1cNQR2eG2sBwokg3q0tvHnQ
 IKqEXErW7NvxRa+RAMEmy2uQoGt6+uNklAbtyJEYM9oR1NieFbPi2yrt9Xn5SAXS
 Brp1S8WYBMilA3W3o6I0trFDRWHdpdtkKIQwLWgJNSEWjbTXh8bSwp/2X1rlOPyI
 ZmphCMOQMU2/uFEyJhTz1WMEV8eVXiRLN8OxSkPxToxdZoGln2U8IBCCCJC9OG+f
 Cf3eMgEcNdEXNcPKqr11NIcHkAx6M6qI/eMDOqk151PslHa8lbis6di9Z87aE0ps
 i8PyrkJGTmgM9cCjXwE8deNseeCmuKYlbPIF+NoxcqtvZstfaMrISwTIEuzV4JHi
 p13YhDxy4XiC3H6pKHub/jo7UCl+wWtFh9SqpqGgduFX/p6FtUHQJm0S0X/DFFZt
 C+2MFVSe6HRHE8B7bFz86+619Qd/rU7+806CLCE+NbYlYAKIBYKzWt/bml6VH3RJ
 OjwXhQqmznWhJjsfD3BUUUpZpHijmylI9gAe2F1oErb8YjRU6gIm7P8hlkOzD7AS
 TfGHPFq2raQcfAiGdVmvkbvvhvYZXnB3WVsAexrYoqrT9I8eEfRI+7SkL75MLR2E
 ikzhJS3SHkAUAd7fUVMt7xMwh0jmhsPjWCCqc13m6UUFoXhTaDgKgPGftltN0bI2
 g85+enZ3/eca6xh/KxvW
 =Kf9b
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull module and param fixes from Rusty Russell:
 "Surprising number of fixes this merge window :(

  The first two are minor fallout from the param rework which went in
  this merge window.

  The next three are a series which fixes a longstanding (but never
  previously reported and unlikely , so no CC stable) race between
  kallsyms and freeing the init section.

  Finally, a minor cleanup as our module refcount will now be -1 during
  unload"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  module: make module_refcount() a signed integer.
  module: fix race in kallsyms resolution during module load success.
  module: remove mod arg from module_free, rename module_memfree().
  module_arch_freeing_init(): new hook for archs before module->module_init freed.
  param: fix uninitialized read with CONFIG_DEBUG_LOCK_ALLOC
  param: initialize store function to NULL if not available.
2015-01-23 06:40:36 +12:00
Rusty Russell d5db139ab3 module: make module_refcount() a signed integer.
James Bottomley points out that it will be -1 during unload.  It's
only used for diagnostics, so let's not hide that as it could be a
clue as to what's gone wrong.

Cc: Jason Wessel <jason.wessel@windriver.com>
Acked-and-documention-added-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Masami Hiramatsu <maasami.hiramatsu.pt@hitachi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-22 11:15:54 +10:30
Fabian Frederick 0f16996cf2 kernel/debug/debug_core.c: Logging clean-up
-Convert printk( to pr_foo()
-Add pr_fmt
-Coalesce formats

Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2014-11-11 09:31:53 -06:00
Daniel Thompson a1465d2f39 kgdb: timeout if secondary CPUs ignore the roundup
Currently if an active CPU fails to respond to a roundup request the CPU
that requested the roundup will become stuck.  This needlessly reduces the
robustness of the debugger.

This patch introduces a timeout allowing the system state to be examined
even when the system contains unresponsive processors.  It also modifies
kdb's cpu command to make it censor attempts to switch to unresponsive
processors and to report their state as (D)ead.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2014-11-11 09:31:53 -06:00
Daniel Thompson b8017177cd kdb: Allow access to sensitive commands to be restricted by default
Currently kiosk mode must be explicitly requested by the bootloader or
userspace. It is convenient to be able to change the default value in a
similar manner to CONFIG_MAGIC_SYSRQ_DEFAULT_MASK.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2014-11-11 09:31:52 -06:00
Anton Vorontsov 420c2b1b0d kdb: Add enable mask for groups of commands
Currently all kdb commands are enabled whenever kdb is deployed. This
makes it difficult to deploy kdb to help debug certain types of
systems.

Android phones provide one example; the FIQ debugger found on some
Android devices has a deliberately weak set of commands to allow the
debugger to enabled very late in the production cycle.

Certain kiosk environments offer another interesting case where an
engineer might wish to probe the system state using passive inspection
commands without providing sufficient power for a passer by to root it.

Without any restrictions, obtaining the root rights via KDB is a matter of
a few commands, and works everywhere. For example, log in as a normal
user:

cbou:~$ id
uid=1001(cbou) gid=1001(cbou) groups=1001(cbou)

Now enter KDB (for example via sysrq):

Entering kdb (current=0xffff8800065bc740, pid 920) due to Keyboard Entry
kdb> ps
23 sleeping system daemon (state M) processes suppressed,
use 'ps A' to see all.
Task Addr               Pid   Parent [*] cpu State Thread             Command
0xffff8800065bc740      920      919  1    0   R  0xffff8800065bca20 *bash

0xffff880007078000        1        0  0    0   S  0xffff8800070782e0  init
[...snip...]
0xffff8800065be3c0      918        1  0    0   S  0xffff8800065be6a0  getty
0xffff8800065b9c80      919        1  0    0   S  0xffff8800065b9f60  login
0xffff8800065bc740      920      919  1    0   R  0xffff8800065bca20 *bash

All we need is the offset of cred pointers. We can look up the offset in
the distro's kernel source, but it is unnecessary. We can just start
dumping init's task_struct, until we see the process name:

kdb> md 0xffff880007078000
0xffff880007078000 0000000000000001 ffff88000703c000   ................
0xffff880007078010 0040210000000002 0000000000000000   .....!@.........
[...snip...]
0xffff8800070782b0 ffff8800073e0580 ffff8800073e0580   ..>.......>.....
0xffff8800070782c0 0000000074696e69 0000000000000000   init............

^ Here, 'init'. Creds are just above it, so the offset is 0x02b0.

Now we set up init's creds for our non-privileged shell:

kdb> mm 0xffff8800065bc740+0x02b0 0xffff8800073e0580
0xffff8800065bc9f0 = 0xffff8800073e0580
kdb> mm 0xffff8800065bc740+0x02b8 0xffff8800073e0580
0xffff8800065bc9f8 = 0xffff8800073e0580

And thus gaining the root:

kdb> go
cbou:~$ id
uid=0(root) gid=0(root) groups=0(root)
cbou:~$ bash
root:~#

p.s. No distro enables kdb by default (although, with a nice KDB-over-KMS
feature availability, I would expect at least some would enable it), so
it's not actually some kind of a major issue.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2014-11-11 09:31:52 -06:00
Daniel Thompson 9452e977ac kdb: Categorize kdb commands (similar to SysRq categorization)
This patch introduces several new flags to collect kdb commands into
groups (later allowing them to be optionally disabled).

This follows similar prior art to enable/disable magic sysrq
commands.

The commands have been categorized as follows:

Always on:  go (w/o args), env, set, help, ?, cpu (w/o args), sr,
            dmesg, disable_nmi, defcmd, summary, grephelp
Mem read:   md, mdr, mdp, mds, ef, bt (with args), per_cpu
Mem write:  mm
Reg read:   rd
Reg write:  go (with args), rm
Inspect:    bt (w/o args), btp, bta, btc, btt, ps, pid, lsmod
Flow ctrl:  bp, bl, bph, bc, be, bd, ss
Signal:     kill
Reboot:     reboot
All:        cpu, kgdb, (and all of the above), nmi_console

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2014-11-11 09:31:52 -06:00
Anton Vorontsov e8ab24d9b0 kdb: Remove KDB_REPEAT_NONE flag
Since we now treat KDB_REPEAT_* as flags, there is no need to
pass KDB_REPEAT_NONE. It's just the default behaviour when no
flags are specified.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2014-11-11 09:31:52 -06:00
Anton Vorontsov 04bb171e7a kdb: Use KDB_REPEAT_* values as flags
The actual values of KDB_REPEAT_* enum values and overall logic stayed
the same, but we now treat the values as flags.

This makes it possible to add other flags and combine them, plus makes
the code a lot simpler and shorter. But functionality-wise, there should
be no changes.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2014-11-11 09:31:51 -06:00
Anton Vorontsov 42c884c10b kdb: Rename kdb_register_repeat() to kdb_register_flags()
We're about to add more options for commands behaviour, so let's give
a more generic name to the low-level kdb command registration function.

There are just various renames, no functional changes.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2014-11-11 09:31:51 -06:00
Anton Vorontsov 15a42a9bc9 kdb: Rename kdb_repeat_t to kdb_cmdflags_t, cmd_repeat to cmd_flags
We're about to add more options for command behaviour, so let's expand
the meaning of kdb_repeat_t.

So far we just do various renames, there should be no functional changes.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2014-11-11 09:31:51 -06:00
Anton Vorontsov a2e5d188aa kdb: Remove currently unused kdbtab_t->cmd_flags
The struct member is never used in the code, so we can remove it.

We will introduce real flags soon by renaming cmd_repeat to cmd_flags.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2014-11-11 09:31:51 -06:00
Rasmus Villemoes f9f2bac27c kdb: replace strnicmp with strncasecmp
The kernel used to contain two functions for length-delimited,
case-insensitive string comparison, strnicmp with correct semantics and
a slightly buggy strncasecmp.  The latter is the POSIX name, so strnicmp
was renamed to strncasecmp, and strnicmp made into a wrapper for the new
strncasecmp to avoid breaking existing users.

To allow the compat wrapper strnicmp to be removed at some point in the
future, and to avoid the extra indirection cost, do
s/strnicmp/strncasecmp/g.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14 02:18:25 +02:00
Thomas Gleixner a9821c741c kdb: Use ktime_get_ts()
do_posix_clock_monotonic_gettime() is a leftover from the initial
posix timer implementation which maps to ktime_get_ts().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20140611234607.261629142@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-06-12 16:18:45 +02:00
Borislav Petkov a8fe19ebfb kernel/printk: use symbolic defines for console loglevels
... instead of naked numbers.

Stuff in sysrq.c used to set it to 8 which is supposed to mean above
default level so set it to DEBUG instead as we're terminating/killing all
tasks and we want to be verbose there.

Also, correct the check in x86_64_start_kernel which should be >= as
we're clearly issuing the string there for all debug levels, not only
the magical 10.

Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Joe Perches <joe@perches.com>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:17 -07:00
Peter Zijlstra 4e857c58ef arch: Mass conversion of smp_mb__*()
Mostly scripted conversion of the smp_mb__* barriers.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-18 14:20:48 +02:00
Davidlohr Bueso 615d6e8756 mm: per-thread vma caching
This patch is a continuation of efforts trying to optimize find_vma(),
avoiding potentially expensive rbtree walks to locate a vma upon faults.
The original approach (https://lkml.org/lkml/2013/11/1/410), where the
largest vma was also cached, ended up being too specific and random,
thus further comparison with other approaches were needed.  There are
two things to consider when dealing with this, the cache hit rate and
the latency of find_vma().  Improving the hit-rate does not necessarily
translate in finding the vma any faster, as the overhead of any fancy
caching schemes can be too high to consider.

We currently cache the last used vma for the whole address space, which
provides a nice optimization, reducing the total cycles in find_vma() by
up to 250%, for workloads with good locality.  On the other hand, this
simple scheme is pretty much useless for workloads with poor locality.
Analyzing ebizzy runs shows that, no matter how many threads are
running, the mmap_cache hit rate is less than 2%, and in many situations
below 1%.

The proposed approach is to replace this scheme with a small per-thread
cache, maximizing hit rates at a very low maintenance cost.
Invalidations are performed by simply bumping up a 32-bit sequence
number.  The only expensive operation is in the rare case of a seq
number overflow, where all caches that share the same address space are
flushed.  Upon a miss, the proposed replacement policy is based on the
page number that contains the virtual address in question.  Concretely,
the following results are seen on an 80 core, 8 socket x86-64 box:

1) System bootup: Most programs are single threaded, so the per-thread
   scheme does improve ~50% hit rate by just adding a few more slots to
   the cache.

+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline       | 50.61%   | 19.90            |
| patched        | 73.45%   | 13.58            |
+----------------+----------+------------------+

2) Kernel build: This one is already pretty good with the current
   approach as we're dealing with good locality.

+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline       | 75.28%   | 11.03            |
| patched        | 88.09%   | 9.31             |
+----------------+----------+------------------+

3) Oracle 11g Data Mining (4k pages): Similar to the kernel build workload.

+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline       | 70.66%   | 17.14            |
| patched        | 91.15%   | 12.57            |
+----------------+----------+------------------+

4) Ebizzy: There's a fair amount of variation from run to run, but this
   approach always shows nearly perfect hit rates, while baseline is just
   about non-existent.  The amounts of cycles can fluctuate between
   anywhere from ~60 to ~116 for the baseline scheme, but this approach
   reduces it considerably.  For instance, with 80 threads:

+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline       | 1.06%    | 91.54            |
| patched        | 99.97%   | 14.18            |
+----------------+----------+------------------+

[akpm@linux-foundation.org: fix nommu build, per Davidlohr]
[akpm@linux-foundation.org: document vmacache_valid() logic]
[akpm@linux-foundation.org: attempt to untangle header files]
[akpm@linux-foundation.org: add vmacache_find() BUG_ON]
[hughd@google.com: add vmacache_valid_mm() (from Oleg)]
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: adjust and enhance comments]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Tested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:35:53 -07:00
Vijaya Kumar K d498d4b47f KGDB: make kgdb_breakpoint() as noinline
The function kgdb_breakpoint() sets up break point at
compile time by calling arch_kgdb_breakpoint();
Though this call is surrounded by wmb() barrier,
the compile can still re-order the break point,
because this scheduling barrier is not a code motion
barrier in gcc.

Making kgdb_breakpoint() as noinline solves this problem
of code reording around break point instruction and also
avoids problem of being called as inline function from
other places

More details about discussion on this can be found here
http://comments.gmane.org/gmane.linux.ports.arm.kernel/269732

Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-26 11:16:25 +00:00
Mike Travis fc8b13740b kgdb/kdb: Fix no KDB config problem
Some code added to the debug_core module had KDB dependencies
that it shouldn't have.  Move the KDB dependent REASON back to
the caller to remove the dependency in the debug core code.

Update the call from the UV NMI handler to conform to the new
interface.

Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Hedi Berriche <hedi@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20140114162551.318251993@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-25 08:55:09 +01:00
Mike Travis 8daaa5f826 kdb: Add support for external NMI handler to call KGDB/KDB
This patch adds a kgdb_nmicallin() interface that can be used by
external NMI handlers to call the KGDB/KDB handler.  The primary
need for this is for those types of NMI interrupts where all the
CPUs have already received the NMI signal.  Therefore no
send_IPI(NMI) is required, and in fact it will cause a 2nd
unhandled NMI to occur. This generates the "Dazed and Confuzed"
messages.

Since all the CPUs are getting the NMI at roughly the same time,
it's not guaranteed that the first CPU that hits the NMI handler
will manage to enter KGDB and set the dbg_master_lock before the
slaves start entering. The new argument "send_ready" was added
for KGDB to signal the NMI handler to release the slave CPUs for
entry into KGDB.

Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Reviewed-by: Hedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20131002151417.928886849@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-03 18:47:54 +02:00
zhangwei(Jovi) f345650964 kgdb/sysrq: fix inconstistent help message of sysrq key
Currently help message of /proc/sysrq-trigger highlight its upper-case
characters, like below:

      SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E)
      memory-full-oom-kill(F) kill-all-tasks(I) ...

this would confuse user trigger sysrq by upper-case character, which is
inconsistent with the real lower-case character registed key.

This inconsistent help message will also lead more confused when
26 upper-case letters put into use in future.

This patch fix kgdb sysrq key: "debug(g)"

Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 17:04:10 -07:00
Linus Torvalds 3cfb07743a KGDB/KDB fixes and cleanups
Cleanups
    Remove kdb ssb command - there is no in kernel disassembler to support it
    Remove kdb ll command - Always caused a kernel oops and there were no
        bug reports so no one was using this command
    Use kernel ARRAY_SIZE macro instead of array computations
 
  Fixes
    Stop oops in kdb if user executes kdb_defcmd with args
    kdb help command truncated text
    ppc64 support for kgdbts
    Add missing kconfig option from original kdb port for dealing with
       catastrophic kernel crashes such that you can reboot automatically
       on continue from kdb
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRMhJPAAoJEIciOldedpOj25gP+wZn/u3YxOGkhL3CIBOegEwW
 KFte7FFNeLNzw8tyEzBMVXok85PJ+/lvm+Xi+a4hhtV7/S+WvwGoWeIg0zCDtrAu
 im4m2X1u00Egcztcr4tCk8Lwc6vNm5KZsBsUsbKKi0K8twaWifkxLMEWeq+3WLzh
 +1d4TDkziwdZfcLpUHvohmCsCyg1EdjUxTYnWpSJvLrq5lhNvTQBowHWZH06GBcI
 MmhC+aHp3myk2/Vwd1AuDq+jIRbH3ORV50wfRONBR7OJ58sOoD9nV8Mr+fy8QLRN
 BPv8WxeRSm7X/Hl6nPm9PX7oNQSg+Ba1+5helIIJMdGGWhJbl9AZslFEU40Zn3yS
 V7FmS3mwRSA8NCgfZ+CO6311tirSCvtf34+5ttXEntyK1ujaplSPffBP4Ya26y6q
 TB2wLr91+3L0LhzrVRj20P13qexsWUW4t9inLzqtDApD3Zljl9Kuwd0febCiLg0r
 mgGkpZjK0VI7S7RfkxpmEyU4bFP2lCTzBOKAKOfIV6O88bfqFdv5QCTHODJArf22
 ugDGPX3tw++Lyc9otGxyPbxmc7npYGqTD1UEM8xK/7sEBiWJm71jjwHN1bwRwB3o
 EC5bcZ6TJgDJnnvYGBTQec74PnUiCu/UnQVFFabzhowQCJTIWSJkPxjnI2BKK1V5
 3exPqogclusAhhwopOtG
 =Hwbq
 -----END PGP SIGNATURE-----

Merge tag 'for_linux-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb

Pull KGDB/KDB fixes and cleanups from Jason Wessel:
 "For a change we removed more code than we added.  If people aren't
  using it we shouldn't be carrying it.  :-)

  Cleanups:
   - Remove kdb ssb command - there is no in kernel disassembler to
     support it

   - Remove kdb ll command - Always caused a kernel oops and there were
     no bug reports so no one was using this command

   - Use kernel ARRAY_SIZE macro instead of array computations

  Fixes:
   - Stop oops in kdb if user executes kdb_defcmd with args

   - kdb help command truncated text

   - ppc64 support for kgdbts

   - Add missing kconfig option from original kdb port for dealing with
     catastrophic kernel crashes such that you can reboot automatically
     on continue from kdb"

* tag 'for_linux-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
  kdb: Remove unhandled ssb command
  kdb: Prevent kernel oops with kdb_defcmd
  kdb: Remove the ll command
  kdb_main: fix help print
  kdb: Fix overlap in buffers with strcpy
  Fixed dead ifdef block by adding missing Kconfig option.
  kdb: Setup basic kdb state before invoking commands via kgdb
  kdb: use ARRAY_SIZE where possible
  kgdb/kgdbts: support ppc64
  kdb: A fix for kdb command table expansion
2013-03-02 08:31:39 -08:00
Vincent 36dfea42cc kdb: Remove unhandled ssb command
The 'ssb' command can only be handled when we have a disassembler, to check for
branches, so remove the 'ssb' command for now.

Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-03-02 08:52:20 -06:00
Jason Wessel a37372f6c3 kdb: Prevent kernel oops with kdb_defcmd
The kdb_defcmd can only be used to display the available command aliases
while using the kernel debug shell.  If you try to define a new macro
while the kernel debugger is active it will oops.  The debug shell
macros must use pre-allocated memory set aside at the time kdb_init()
is run, and the kdb_defcmd is restricted to only working at the time
that the kdb_init sequence is being run, which only occurs if you
actually activate the kernel debugger.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-03-02 08:52:19 -06:00
Jason Wessel 1b2caa2dcb kdb: Remove the ll command
Recently some code inspection was done after fixing a problem with
kmalloc used while in the kernel debugger context (which is not
legal), and it turned up the fact that kdb ll command will oops the
kernel.

Given that there have been zero bug reports on the command combined
with the fact it will oops the kernel it is clearly not being used.
Instead of fixing it, it will be removed.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-03-02 08:52:19 -06:00
Jason Wessel 074604af21 kdb_main: fix help print
The help command was chopping all the usage instructions such that
they were not readable.

Example:

bta             [D|R|S|T|C|Z|E|U|I| Backtrace all processes matching state flag
per_cpu         <sym> [<bytes>] [<c Display per_cpu variables

Where as it should look like:

bta             [D|R|S|T|C|Z|E|U|I|M|A]
                                    Backtrace all processes matching state flag
per_cpu         <sym> [<bytes>] [<cpu>]
                                    Display per_cpu variables

All that is needed is to check the how long the cmd_usage is and jump
to the next line when appropriate.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-03-02 08:52:18 -06:00
Jason Wessel 4eb7a66d94 kdb: Fix overlap in buffers with strcpy
Maxime reported that strcpy(s->usage, s->usage+1) has no definitive
guarantee that it will work on all archs the same way when you have
overlapping memory.  The fix is simple for the kdb code because we
still have the original string memory in the function scope, so we
just have to use that as the argument instead.

Reported-by: Maxime Villard <rustyBSD@gmx.fr>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-03-02 08:52:18 -06:00
Matt Klein 00370b8f8d kdb: Setup basic kdb state before invoking commands via kgdb
Although invasive kdb commands are not supported via kgdb, some useful
non-invasive commands like bt* require basic kdb state to be setup before
calling into the kdb code. Factor out some of this code and call it before
and after executing kdb commands via kgdb.

Signed-off-by: Matt Klein <mklein@twitter.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-03-02 08:52:17 -06:00
Sasha Levin 5f784f798c kdb: use ARRAY_SIZE where possible
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-03-02 08:52:17 -06:00
John Blackwood f7c82d5a3c kdb: A fix for kdb command table expansion
When locally adding in some additional kdb commands, I stumbled
across an issue with the dynamic expansion of the kdb command table.
When the number of kdb commands exceeds the size of the statically
allocated kdb_base_commands[] array, additional space is allocated in
the kdb_register_repeat() routine.

The unused portion of the newly allocated array was not being initialized
to zero properly and this would result in segfaults when help '?' was
executed or when a search for a non-existing command would traverse the
command table beyond the end of valid command entries and then attempt
to use the non-zeroed area as actual command entries.

Signed-off-by: John Blackwood <john.blackwood@ccur.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-03-02 08:52:16 -06:00
Greg Kroah-Hartman 16559ae48c kgdb: remove #include <linux/serial_8250.h> from kgdb.h
There's no reason kgdb.h itself needs to include the 8250 serial port
header file.  So push it down to the _very_ limited number of individual
drivers that need the values in that file, and fix up the places where
people really wanted serial_core.h and platform_device.h.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-04 15:35:26 -08:00
Rusty Russell 0d21b0e347 module: add new state MODULE_STATE_UNFORMED.
You should never look at such a module, so it's excised from all paths
which traverse the modules list.

We add the state at the end, to avoid gratuitous ABI break (ksplice).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-01-12 13:27:05 +10:30
Linus Torvalds 6c536a17fa KGDB/KDB fixes and cleanups
Cleanups
    Clean up compile warnings in kgdboc.c and x86/kernel/kgdb.c
    Add module event hooks for simplified debugging with gdb
  Fixes
    Fix kdb to stop paging with 'q' on bta and dmesg
    Fix for data that scrolls off the vga console due to line wrapping
      when using the kdb pager
  New
    The debug core registers for kernel module events which allows a
      kernel aware gdb to automatically load symbols and break on entry
      to a kernel module
    Allow kgdboc=kdb to setup kdb on the vga console
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQeB8KAAoJEIciOldedpOjpbIP/j+LXEkzXKKfi/3m79VQ87DB
 5iUmTS84t84pomHamXX175AC0gA/2mC0FbbcHpqjlhxF4awXcviCNIiTdtSOTbbu
 G102naLHY8i77X+XbHuN2utJeaRLw8rsfMMZGmjJnjfpc4LtsaH0YTkUzbt3qvba
 N6/QvknadzIrmoCJvHipdOdsSmL0YmTS22+koG4es9B5jvOqVH/W7jZs1qRlVw96
 VxG5Psx4LPB+RI+ZwF1WwbGxbtqKGwkVvkcGG1XIW7FQojHmjw+vUERQCjoFueJ5
 NkKfus98j85/+MvSTkWx3L1K46MHMCFbtJs9RWftJ8GtoNNnm7GDxasoIG2bJKyG
 HFD3IGPuKAokE/equF3eGTRHeEM0IUGwT3EnBqdKd73zud27WsHaSqC/1CPR+74v
 ojLQ2ft1QF+pEkGrhRTdQpLyVnvEmxu8q+j9z9n/HlGEVv8kZ6LGxDPjWB+um/Yi
 Cs0XAryYrL5gE5O+Vwna61luughtIYJwR7+DeVxnQYJ43x/0MtN/SoURnwvrCTEo
 9FeoMgZm1nLh6EW29ahIT/hMu4f0sM91Kiwrmc/zEWZgoB++wo1n470qQmUUrOx4
 CPD7zdmDrf6YxDG2QTHjCtVErO4aJ5zN4Dq0+YyodV545SZVn3t4qBDTVvKhq4Y6
 NIhZAxrv5RKABwtLcP9E
 =uf0L
 -----END PGP SIGNATURE-----

Merge tag 'for_linus-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb

Pull KGDB/KDB fixes and cleanups from Jason Wessel:
 "Cleanups
   - Clean up compile warnings in kgdboc.c and x86/kernel/kgdb.c
   - Add module event hooks for simplified debugging with gdb
 Fixes
   - Fix kdb to stop paging with 'q' on bta and dmesg
   - Fix for data that scrolls off the vga console due to line wrapping
     when using the kdb pager
 New
   - The debug core registers for kernel module events which allows a
     kernel aware gdb to automatically load symbols and break on entry
     to a kernel module
   - Allow kgdboc=kdb to setup kdb on the vga console"

* tag 'for_linus-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
  tty/console: fix warnings in drivers/tty/serial/kgdboc.c
  kdb,vt_console: Fix missed data due to pager overruns
  kdb: Fix dmesg/bta scroll to quit with 'q'
  kgdboc: Accept either kbd or kdb to activate the vga + keyboard kdb shell
  kgdb,x86: fix warning about unused variable
  mips,kgdb: fix recursive page fault with CONFIG_KPROBES
  kgdb: Add module event hooks
2012-10-13 11:16:58 +09:00
Jason Wessel 17b572e820 kdb,vt_console: Fix missed data due to pager overruns
It is possible to miss data when using the kdb pager.  The kdb pager
does not pay attention to the maximum column constraint of the screen
or serial terminal.  This result is not incrementing the shown lines
correctly and the pager will print more lines that fit on the screen.
Obviously that is less than useful when using a VGA console where you
cannot scroll back.

The pager will now look at the kdb_buffer string to see how many
characters are printed.  It might not be perfect considering you can
output ASCII that might move the cursor position, but it is a
substantially better approximation for viewing dmesg and trace logs.

This also means that the vt screen needs to set the kdb COLUMNS
variable.

Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2012-10-12 06:37:35 -05:00
Jason Wessel d1871b38fc kdb: Fix dmesg/bta scroll to quit with 'q'
If you press 'q' the pager should exit instead of printing everything
from dmesg which can really bog down a 9600 baud serial link.

The same is true for the bta command.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2012-10-12 06:37:35 -05:00
Jason Wessel f30fed10c4 kgdb: Add module event hooks
Allow gdb to auto load kernel modules when it is attached,
which makes it trivially easy to debug module init functions
or pre-set breakpoints in a kernel module that has not loaded yet.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2012-10-12 06:37:33 -05:00
Anton Vorontsov ad394f66fa kdb: Implement disable_nmi command
This command disables NMI-entry. If NMI source has been previously shared
with a serial console ("debug port"), this effectively releases the port
from KDB exclusive use, and makes the console available for normal use.

Of course, NMI can be reenabled, enable_nmi modparam is used for that:

	echo 1 > /sys/module/kdb/parameters/enable_nmi

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-26 13:42:25 -07:00
Anton Vorontsov 5a14fead07 kernel/debug: Mask KGDB NMI upon entry
The new arch callback should manage NMIs that usually cause KGDB to
enter. That is, not all NMIs should be enabled/disabled, but only
those that issue kgdb_handle_exception().

We must mask it as serial-line interrupt can be used as an NMI, so
if the original KGDB-entry cause was say a breakpoint, then every
input to KDB console will cause KGDB to reenter, which we don't want.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-26 13:42:25 -07:00
Anton Vorontsov b10d22d6e8 kernel/debug: Make use of KGDB_REASON_NMI
Currently kernel never set KGDB_REASON_NMI. We do now, when we enter
KGDB/KDB from an NMI.

This is not to be confused with kgdb_nmicallback(), NMI callback is
an entry for the slave CPUs during CPUs roundup, but REASON_NMI is the
entry for the master CPU.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2012-07-31 08:16:43 -05:00
Jason Wessel 07cd27bbd4 kdb: Remove cpu from the more prompt
Having the CPU in the more prompt is completely redundent vs the
standard kdb prompt, and it also wastes 32 bytes on the stack.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2012-07-31 08:16:43 -05:00
Jason Wessel 0f26d0e0a7 kdb: Remove unused KDB_FLAG_ONLY_DO_DUMP
This code cleanup was missed in the original kdb merge, and this code
is simply not used at all.  The code that was previously used to set
the KDB_FLAG_ONLY_DO_DUMP was removed prior to the initial kdb merge.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2012-07-31 08:16:42 -05:00
Anton Vorontsov c064da4714 kdb: Switch to nolock variants of kmsg_dump functions
The locked variants are prone to deadlocks (suppose we got to the
debugger w/ the logbuf lock held), so let's switch to nolock variants.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-21 10:34:00 -07:00