Currently the we display all detected features/libraries by following
rules:
- if one of the features is missing
- if it's build from clean tree
This patch changes changes this behavior in several ways.
- We no longer display all detected features, only detected libraries
are displayed by default:
$ make
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libunwind: [ on ]
The assumption is, that above libraries are the most interesting part
of the detection, while we don't care much about detection of on-exit
support.
- If all above libraries are detected, the default is not shown on
subsequent builds.
- If one of the above libraries is missing, the detection output is
forced.
- The features status is stored in PERF-FEATURES file and the detection
output is forced in case the there's difference between the file
contents and currently detected features.
- If you want to see all detected features, you can use VF=1 make
variable, that forces the detected features output.
$ make VF=1
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libunwind: [ on ]
... backtrace: [ on ]
... fortify-source: [ on ]
... gtk2-infobar: [ on ]
... libelf-getphdrnum: [ on ]
... libelf-mmap: [ on ]
... libpython-version: [ on ]
... on-exit: [ on ]
... stackprotector-all: [ on ]
... timerfd: [ on ]
... libunwind-debug-frame: [ OFF ]
... bionic: [ OFF ]
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392825179-5228-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introducing global macro HAVE_DWARF_UNWIND_SUPPORT to indicate we have
dwarf unwind support. Any library providing the dwarf post unwind
support will enable this macro.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1389098853-14466-12-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The plugindir_SQ definition contains $(prefix) which is not needed as
the $(libdir) definition already contains prefix in it. This leads to
the path including an extra prefix in it, e.g. /usr/usr/lib64.
The -DPLUGIN_DIR defintion includes DESTDIR. This is incorrect, as it
sets the plugin search path to include the value of DESTDIR. DESTDIR is
a mechanism to install in a non-standard location such as a chroot or an
RPM build root. In the RPM case, this leads to the search path being
incorrect after the resulting RPM is installed (or in some cases an RPM
build failure).
Remove both of these unnecessary inclusions.
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20140122150147.GK16455@hansolo.jdub.homelinux.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the feature-checks Makefile does not inherit $(CC), and calls
cc rather than $(CROSS_COMPILE)gcc. Thus the feature checks invoke the
native toolchain rather than the cross toolchain, and can identify
features as available when they are not. This can break the build.
Additionally the native pkg-config is always called as opposed to
$(CROSS_COMPILE)pkg-config, so the wrong flags and paths may be passed
to the cross compiler.
This patch passes CROSS_COMPILE down to the feature-checks Makefile, and
forces its use. Additionally pkg-config is replaced with
$(CROSS_COMPILE)pkg-config via a new $(PKG_CONFIG) variable. This patch
has been build tested on x86_64 and arm.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1389782648-4417-4-git-send-email-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since commit 01287e2cb7, test-volatile-register-var.c is no more built
as part of the automatic feature check.
This patch remove the unneeded file.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/339d86ad76741ed929defd18541f774b404003b4.1389461371.git.ydroneaud@opteya.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can be shared with others like libtraceevent.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1389276059-8829-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of explicitly adding same value into
FEATURE_CHECK_(C|LD)FLAGS-all variables we can do that automatically.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1389098853-14466-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I need to use arch related setup in the tests/make, so moving arch setup
into Makefile.arch.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1388759553-12974-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving QUIET_(CLEAN|INSTAL) variables into:
tools/scripts/Makefile.include
to be usable by other tools. The change to use them in libtraceevent is
in following patches.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1387460527-15030-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the per-feature check flags for the unwinding feature in order to
correctly compile the test-all, libunwind and libunwind-debug-frame
feature checks.
Tested on x86_64, ARMv7 and ARMv8 with and without LIBUNWIND_DIR set in
'make -C tools/perf'
Signed-off-by: Jean Pihet <jean.pihet@linaro.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linaro-kernel@lists.linaro.org
Cc: patches@linaro.org
Link: http://lkml.kernel.org/r/1386678244-13535-3-git-send-email-jean.pihet@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add CFLAGS and LDFLAGS for each feature to be checked. This allows to
pass flags and parameters to the feature checks compilation. Also
simplifies the feature check makefile, to come in a subsequent patch.
Signed-off-by: Jean Pihet <jean.pihet@linaro.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linaro-kernel@lists.linaro.org
Cc: patches@linaro.org
Link: http://lkml.kernel.org/r/1386678244-13535-2-git-send-email-jean.pihet@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We use -fstack-protector-all option to enable stack protecting for all
available functions. There's no reason for enabling -Wstack-protector to
get warning for unprotected functions.
Removing stackprotector feature check which was used to enable the
-Wstack-protector option.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The package required for numa is named numactl-devel in Fedora or RHEL,
and libnuma-devel in OpenSuSE, and libnuma-dev in Ubuntu.
This patch corrects the package name in warning message in
feature-libnuma checking.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Acked-by: Peter Hurley <peter@hurleysoftware.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Link: http://lkml.kernel.org/r/1385998008-6851-1-git-send-email-yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set feature-libunwind-debug-frame. We don't want it in
CORE_FEATURE_TESTS because it's not the generic case, but we
need to set it in the !feature-libunwind case.
Also, because x86 distributions typically don't have
dwarf_find_debug_frame() unwinding method:
test-libunwind-debug-frame.c:(.text+0x31): undefined reference to `_Ux86_64_dwarf_find_debug_frame'
Restrict this new API to ARM for the time being.
With this patch test-all.c works again, so repeat perf builds
are fast again:
comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
[...]
0,452899660 seconds time elapsed ( +- 0,11% )
While with before it was:
comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
[...]
1,674001829 seconds time elapsed ( +- 0,16% )
[ Includes fix to config/feature-checks/Makefile from Will Deacon. ]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-scsoctqzmou3rpkixCHezy9e@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
'feature_timerfd' is checked all the time and calculated explicitly,
in a serial fashion. Add it to CORE_FEATURE_TESTS which causes it to
be built in parallel, using the newfangled parallel build autodetection
code.
This shaves 137 msecs off the perf build time on my system, which
speeds up the common case cached build by 43%:
Before:
comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
[...]
0,453771441 seconds time elapsed ( +- 0,09% )
After:
comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
[...]
0,316290185 seconds time elapsed ( +- 0,24% )
Cc: David Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-bb92CmexihopoSyqnkqepvsy@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull ARM updates from Russell King:
"Included in this series are:
1. BE8 (modern big endian) changes for ARM from Ben Dooks
2. big.Little support from Nicolas Pitre and Dave Martin
3. support for LPAE systems with all system memory above 4GB
4. Perf updates from Will Deacon
5. Additional prefetching and other performance improvements from Will.
6. Neon-optimised AES implementation fro Ard.
7. A number of smaller fixes scattered around the place.
There is a rather horrid merge conflict in tools/perf - I was never
notified of the conflict because it originally occurred between Will's
tree and other stuff. Consequently I have a resolution which Will
forwarded me, which I'll forward on immediately after sending this
mail.
The other notable thing is I'm expecting some build breakage in the
crypto stuff on ARM only with Ard's AES patches. These were merged
into a stable git branch which others had already pulled, so there's
little I can do about this. The problem is caused because these
patches have a dependency on some code in the crypto git tree - I
tried requesting a branch I can pull to resolve these, and all I got
each time from the crypto people was "we'll revert our patches then"
which would only make things worse since I still don't have the
dependent patches. I've no idea what's going on there or how to
resolve that, and since I can't split these patches from the rest of
this pull request, I'm rather stuck with pushing this as-is or
reverting Ard's patches.
Since it should "come out in the wash" I've left them in - the only
build problems they seem to cause at the moment are with randconfigs,
and since it's a new feature anyway. However, if by -rc1 the
dependencies aren't in, I think it'd be best to revert Ard's patches"
I resolved the perf conflict roughly as per the patch sent by Russell,
but there may be some differences. Any errors are likely mine. Let's
see how the crypto issues work out..
* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits)
ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h"
ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg().
ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h
ARM: 7871/1: amba: Extend number of IRQS
ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise()
ARM: 7872/1: Support arch_irq_work_raise() via self IPIs
ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode
ARM: 7878/1: nommu: Implement dummy early_paging_init()
ARM: 7876/1: clear Thumb-2 IT state on exception handling
ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}()
ARM: footbridge: fix build warnings for netwinder
ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu
ARM: fix misplaced arch_virt_to_idmap()
ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown
ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation
ARM: 7869/1: remove unused XSCALE_PMU Kconfig param
ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t
ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments
ARM: 7862/1: pcpu: replace __get_cpu_var_uses
ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code
...
feature_check needs to be invoked through call, and LDFLAGS may not be
set so quotes are needed.
Thanks to Jiri for spotting the quotes around LDFLAGS; that one was
driving me nuts with the upcoming timerfd feature detection.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383064996-20933-1-git-send-email-dsahern@gmail.com
[ Fixed conflict with 8a0c4c2843 ("perf tools: Fix libunwind build and feature detection for 32-bit build") ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the OS does not have timerfd support (e.g., older OS'es like RHEL5)
disable perf kvm stat live.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383064996-20933-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use -lunwind-x86 instead of -lunwind-x86_64 for 32-bit build.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1383313899-15987-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Setting EXTRA_CFLAGS=-m32 did not work because it was not passed around.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1383313899-15987-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the absence of s DEBUG variable definition on the command line perf
tools was building without optimization. Fix by assigning DEBUG if it
is not defined.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1382427258-17495-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
builtin-record.c:42:12: error: static declaration of 'on_exit' follows non-static declaration
In file included from util/util.h:51:0,
from builtin.h:4,
from builtin-record.c:8:
/usr/include/stdlib.h:536:12: note: previous declaration of 'on_exit' was here
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1382099356-4918-12-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim noticed that the autodep .d file inclusion rule was
unnecessarily complicated:
> > +-include *.d */*.d
>
> Hmm.. this */*.d part is really needed?
Only include *.d files.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim noticed that the stackprotector testcase was incomplete:
> The flag being checked should be -"W"stack-protector instead of
> -"f"stack-protector. And the gcc manpage says that -Wstack-protector is
> only active when -fstack-protector is active. So the end result should
> look like
>
> $(BUILD) -Werror -fstack-protector -Wstack-protector
Add -Wstack-protector.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim noticed that the volatile-register-var feature check
is superfluous:
> The gcc manpage says this warning is enabled by -Wall, and we add -Wall
> to CFLAGS before doing feature checks. So all gcc versions that support
> -Wvolatile-register-var enables it by default without this check and
> older gcc versions will always fail the feature check.
Remove it - this will further speed up feature checks.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ulrich Drepper and Namhyung Kim reported that the libelf logic in
config/Makefile is duplicated in part.
Remove the duplication, and also remove the now unused FLAGS_LIBELF
variable.
Reported-by: Ulrich Drepper <drepper@gmail.com>
Reported-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim reported these duplicate DPACKAGE definitions:
test-libbfd:
$(BUILD) -DPACKAGE='perf' -DPACKAGE=perf -lbfd -ldl
Fix all affected places and use Namhyung's suggestion that the
definition should look like a normal C string: -DPACKAGE='"perf"'.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo reported that 'make DEBUG=1' does not work anymore.
The reason is that 'Makefile' only passes it through to
'Makefile.perf' via the environment, but 'Makefile.perf'
checks that it's a command line option:
ifeq ("$(origin DEBUG)", "command line")
PERF_DEBUG = $(DEBUG)
endif
So pass it through properly, and also clean up DEBUG parameter
handling while at it and fix a couple of annoyances:
- DEBUG=0 used to be interpreted as 'debugging on'. Turn it
into 'debugging off' instead.
- Same was the case for 'DEBUG=' - turn that into debug-off
as well.
- Pass in just a clean, sanitized 'DEBUG' value and get rid of
the intermediate, unnecessary PERF_DEBUG variable.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We fail build with NO_DEMANGLE with missing -lbfd externals error.
The reason is that we now use bfd code in srcline object:
perf tools: Implement addr2line directly using libbfd
So we need to check/add -lbfd always now.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
'make install' used to show all the install lines, which is way too
verbose to be really informative to the user.
Implement summary output instead:
comet:~/tip/tools/perf> make install
BUILD: Doing 'make -j12' parallel build
SUBDIR Documentation
INSTALL Documentation-man
INSTALL binaries
INSTALL libexec
INSTALL perf-archive
INSTALL perl-scripts
INSTALL python-scripts
INSTALL bash_completion-script
INSTALL tests
'make install V=1' will still show the old, detailed output.
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1381312169-17354-5-git-send-email-mingo@kernel.org
[ Fixed conflict with libperf-gtk patches in acme/perf/core, cope with 'trace' alias ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'make clean' used to show all the rm lines, which isn't really
informative in any way and spams the console.
Implement summary output:
comet:~/tip/tools/perf> make clean
CLEAN libtraceevent
CLEAN liblk
CLEAN config
CLEAN core-objs
CLEAN core-progs
CLEAN core-gen
CLEAN Documentation
CLEAN python
'make clean V=1' will still show the old, detailed output.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1381312169-17354-2-git-send-email-mingo@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we build perf with NO_LIBPYTHON=1 NO_LIBPERL=1 the '-ldl' is not
added to libs build fails if we have gtk2 code in, because it depends on
it.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1380221754-29865-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the srcline sort key is used , the external addr2line utility needs
to be run for each hist entry to get the srcline info. This can consume
quite a time if one has a huge perf.data file.
So rather than executing the external utility, implement it internally
and just call it. We can do it since we've linked with libbfd already.
Signed-off-by: Roberto Agostino Vitillo <ravitillo@lbl.gov>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1378876173-13363-9-git-send-email-namhyung@kernel.org
[ Use a2l_data struct instead of static globals ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separate out GTK codes to a shared object called libperf-gtk.so. This
time only GTK codes are built with -fPIC and libperf remains as is. Now
run GTK hist and annotation browser using libdl.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1379053663-13706-1-git-send-email-namhyung@kernel.org
[ Fix it up wrt Ingo's tools/perf build speedups ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove DUMMY by making sure 'feature_print' is evaluated and thus
all messages are printed.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/20131008155110.GA15558@krava.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
David Ahern reported that when passing in LDFLAGS=-static then
the feature checks still succeed - causing build failures down
the line because the static libraries are missing.
Solve this by passing through LDFLAGS to the feature-check
Makefile.
Reported-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20131007155129.GA1066@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The various testcases used different styles, which was not really
visible as long as they hid in feature-tests.mak. Now that they
are out in the open make them prettier.
( Also delete the leftover, empty feature-tests.mak file. )
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-drDWk8xltndjdsespzjbhu6w@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Arnaldo noticed that the feature-check binaries are generated in the
config/check-features/ directory even if O= is specified.
Implement $(OUTPUT) logic for config/check-features/Makefile.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-NLwlnv5prsubuey0vfocebym@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Simplify test-all.c by including it all the testcases via #include.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-pcZlwqq5ou7Ebvkekvhtzfbm@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Prepare to include them into test-all.c directly, by making sure
that they build cleanly and without warnings.
Also make sure they make a certain amount of sense and don't crash
when executed.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-Mn9gsdutzopoowk3xurqpsxE@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Also remove try-cc et al. These got obsoleted by the split-out feature checks in
config/feature-checks/.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-Y6ailbiranadqlrl8Dfivjbi@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Note that these are rarely executed tests, so we call feature_check() explicitly
and don't have them in CORE_FEATURE_CHECKS.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-pvumlx6mbtfxffgrlwO2mRcx@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Change the print-out of auto-detected features by making sure that
repeat invocations of 'make' when all features are successfully
detected do not produce the (rather lengthy) autodetection printout.
( When one or more features are missing then we still print out the
feature detection table, to make sure people are aware of the
resulting limitations. )
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-qd8sMsshcjomxqx9bQcufmaa@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The detection of certain rarely detected features can be delayed
to when they are actually needed.
So speed up the common case of auto-detection by pre-building only
a core set of features and populating only their feature-flags.
[ Features not listed in CORE_FEATURES need to built explicitly
via the feature_check() function. ]
(Also order the feature names alphabetically, while at it.)
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-xQkuveknd0gqla1dfxrqKpkl@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Concatenate all feature checks into test-all.c.
This can be built and checked faster than all the individual tests.
If test-all fails then we still check all the individual features, so
this is a pure speedup, it should have no effects on functionality.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-5hlcb2qorzwfwrWTjiygjjih@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The strlcpy() feature check slows every build unnecessarily - so make it
a __weak function so it does not have to be auto-detected.
If the libc (or any other library) has an strlcpy() implementation it will
be used - otherwise our fallback is active.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-zjbrcupapu08ePsyYhhhxiwk@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Nest the rules properly. No change in functionality.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-jjlmizjmhockUs04wqnScnkl@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Nest the rules properly. No change in functionality.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-wwktuHl4Ra5lyrrretkxmxqf@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Nest the rules properly. No change in functionality.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-dDgivr9xtjrof2vmoyOfwxkj@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use GCC's -MD feature to generate a dependency file for each feature test .c file,
and include that .d file in the config/feature-checks/Makefile.
This allows us to do two things:
- speed up feature tests
- detect removal or changes in build dependencies - including system libraries/headers
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-Jfma8pmPnnqzpxjbs3hpgmsj@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Start the split-out of the feature check code by adding a list of features to be
tested, and rules to process that list by building its matching feature-check
file in config/feature-checks/test-<feature>.c.
Add 'hello' as the initial feature.
This structure will allow us to build split-out feature checks in parallel and
thus speed up feature detection dramatically.
No change in functionality: no feature check is used by the build rules yet.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-pixkihgscFaohfFigq5yt9gs@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In ubuntu systems the libaudit test was always failing due to the
newline in the printf call not being escaped, which somehow didn't
prevented the test from working as expected on other systems, such
as fedora18.
Fix it by removing the newline, as this is just a test, that program is
just a compile test.
The error messages, obtained using 'make V=1':
CHK libaudit
<stdin>: In function ‘main’:
<stdin>:5:9: error: missing terminating " character [-Werror]
<stdin>:5:2: error: missing terminating " character
<stdin>:6:1: error: missing terminating " character [-Werror]
<stdin>:6:1: error: missing terminating " character
<stdin>:7:2: error: expected expression before ‘return’
<stdin>:8:1: error: expected ‘;’ before ‘}’ token
cc1: all warnings being treated as errors
config/Makefile:241: No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev
After this change the test works as expected in all systems tested and the
'trace' tool is built when the needed devel packages are installed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0trw8qs9hafeopc0vj1sicay@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The newly added dwarf unwinding feature [1] requires:
. a recent version (>= 1.1) of libunwind,
. libunwind to be configured with --enable-debug-frame.
[1] http://www.spinics.net/lists/kernel/msg1598951.html
Add the corresponding API tests in the feature check list.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Jean Pihet <jean.pihet@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Add a feature check for get_phdrnum() and implement a replacement if it
is not present.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1379080170-6608-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are older libaudit versions that don't have an
audit_errno_to_name() method, resulting in a builtin-trace.c build
error:
builtin-trace.c: In function ‘trace__sys_exit’:
builtin-trace.c:794: warning: implicit declaration of function ‘audit_errno_to_name’
Expand the libaudit test to detect this.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20130912132706.GD23826@gmail.com
[ Fix the test by escaping the double quotes ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Header files of libtraceevent or no longer local headers. Thus, use
default path notation for them. Also removing extra traceevent include
path and instead handle this similar to liblk.
Signed-off-by: Robert Richter <robert.richter@linaro.org>
Signed-off-by: Robert Richter <rric@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Robert Richter <rric@kernel.org>
Link: http://lkml.kernel.org/r/1370964558-8599-1-git-send-email-rric@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since libelf sometimes uses libpthread, we have to list that after -lelf
when someone tries to build statically. Else things go boom:
Makefile:479: *** No libelf.h/libelf found, please install \
libelf-dev/elfutils-libelf-devel. Stop.
Similarly, the -ldw test fails as it often uses -lz:
Makefile:462: No libdw.h found or old libdw.h found or elfutils is older \
than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev
And if we add debugging to try-cc, we see:
+ echo '#include <dwarf.h>
int main(void)
{
Dwarf *dbg = dwarf_begin(0, DWARF_C_READ);
return (long)dbg;
}'
+ i686-pc-linux-gnu-gcc -x c - -O2 -pipe -march=atom -mtune=atom -mfpmath=sse -g \
-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE \
-ldw -lelf -static -lpthread -lrt -lelf -lm -o .24368
/usr/lib/libdw.a(dwarf_begin_elf.o):function check_section.isra.1: error: undefined reference to 'inflateInit_'
/usr/lib/libdw.a(dwarf_begin_elf.o):function check_section.isra.1: error: undefined reference to 'inflate'
/usr/lib/libdw.a(dwarf_begin_elf.o):function check_section.isra.1: error: undefined reference to 'inflateReset'
/usr/lib/libdw.a(dwarf_begin_elf.o):function check_section.isra.1: error: undefined reference to 'inflateEnd'
+ echo '#include <libelf.h>
int main(void)
{
Elf *elf = elf_begin(0, ELF_C_READ, 0);
return (long)elf;
}'
+ i686-pc-linux-gnu-gcc -x c - -O2 -pipe -march=atom -mtune=atom -mfpmath=sse -g \
-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE \
-static -lpthread -lrt -lelf -lm -o .19216
/usr/lib/libelf.a(elf_begin.o):function file_read_elf: error: undefined reference to 'pthread_rwlock_init'
/usr/lib/libelf.a(elf_begin.o):function __libelf_read_mmaped_file: error: undefined reference to 'pthread_rwlock_init'
/usr/lib/libelf.a(elf_begin.o):function __libelf_read_mmaped_file: error: undefined reference to 'pthread_rwlock_init'
/usr/lib/libelf.a(elf_begin.o):function read_file: error: undefined reference to 'pthread_rwlock_init'
/usr/lib/libelf.a(elf_begin.o):function lock_dup_elf.8072: error: undefined reference to 'pthread_rwlock_unlock'
/usr/lib/libelf.a(elf_begin.o):function lock_dup_elf.8072: error: undefined reference to 'pthread_rwlock_wrlock'
/usr/lib/libelf.a(elf_begin.o):function elf_begin: error: undefined reference to 'pthread_rwlock_rdlock'
/usr/lib/libelf.a(elf_begin.o):function elf_begin: error: undefined reference to 'pthread_rwlock_unlock'
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1368073064-18276-1-git-send-email-vapier@gentoo.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Among other things, the following:
commit 31160d7fea
Date: Tue Jan 8 16:22:36 2013 -0500
perf tools: Fix GNU make v3.80 compatibility issue
attempts to aid the user by tapping into an existing error message,
as described in the commit message:
... Also fix an issue where _get_attempt was called with only
one argument. This prevented the error message from printing
the name of the variable that can be used to fix the problem.
or more precisely:
-$(if $($(1)),$(call _ge_attempt,$($(1)),$(1)),$(call _ge_attempt,$(2)))
+$(if $($(1)),$(call _ge_attempt,$($(1)),$(1)),$(call _ge_attempt,$(2),$(1)))
However, The "missing" argument was in fact missing on purpose; it's
absence is a signal that the error message should be skipped, because
the failure would be due to the default value, not any user-supplied
value. This can be seen in how `_ge_attempt' uses `gea_err' (in the
config/utilities.mak file):
_ge_attempt = $(if $(get-executable),$(get-executable),$(_gea_warn)$(call _gea_err,$(2)))
_gea_warn = $(warning The path '$(1)' is not executable.)
_gea_err = $(if $(1),$(error Please set '$(1)' appropriately))
That is, because the argument is no longer missing, the value `$(1)'
(associated with `_gea_err') always evaluates to true, thus always
triggering the error condition that is meant to be reserved for
only the case when a user explicitly supplies an invalid value.
Concretely, the result is a regression in the Makefile's configuration
of python support; rather than gracefully disable support when the
relevant executables cannot be found according to default values, the
build process halts in error as though the user explicitly supplied
the values.
This new commit simply reverts the offending one-line change.
Reported-by: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/CAOJsxLHv17Ys3M7P5q25imkUxQW6LE_vABxh1N3Tt7Mv6Ho4iw@mail.gmail.com
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Fixing build errors with O and DESTDIR make vars set:
$ make prefix=/usr/local O=$builddir DESTDIR=$destdir -C tools/ perf
...
make[1]: Entering directory `.../.source/perf/tools/perf'
CC .../.build/perf/perf/util/parse-events.o
util/parse-events.c:14:32: fatal error: parse-events-bison.h: No such file or directory
compilation terminated.
make[1]: *** [.../.build/perf/perf/util/parse-events.o] Error 1
...
and:
LINK /.../.build/perf/perf/perf
gcc: error: /.../.build/perf/perf//.../.source/perf/tools/lib/lk/liblk.a: No such file or directory
Signed-off-by: Robert Richter <robert.richter@linaro.org>
Signed-off-by: Robert Richter <rric@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Robert Richter <rric@kernel.org>
Link: http://lkml.kernel.org/r/1370964158-4135-1-git-send-email-rric@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix having verbose build with V=0, e.g:
make V=0 -C tools/ perf
Signed-off-by: Robert Richter <robert.richter@calxeda.com>
Link: http://lkml.kernel.org/r/20130503134953.GU8356@rric.localhost
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switching to full path C include directories, to make the includes
clear. Plus little include cleanup.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-21-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merging all *LDFLAGS* make variable into LDFLAGS to eliminate all
special *LDFLAGS* variables and make the setup clear.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-20-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merging all *CFLAGS* make variable into CFLAGS to eliminate all special
*_CFLAGS_* variables and make the setup clear.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-19-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that the map browser shares the input routine with the hists
browser, there is no need for using any libnewt routine, so remove all
traces except for honouring NO_NEWT=1 on the makefile command line as an
indication that TUI support is not needed, in fact it just sets
NO_SLANG=1.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wae5o7xca9m52bj1re28jc5j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit "perf: Add 'perf bench numa mem'..." added a NUMA performance
benchmark to perf. Make this optional and test for required
dependencies.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1359337882-21821-1-git-send-email-peter@hurleysoftware.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
According to Documentation/Changes, the kernel should be buildable with
GNU make 3.80+. tools/perf/config/utilities.mak contains the "$(or"
construct, which requires make 3.81. This causes "make" to fail on
systems with GNU make 3.80.
Replace "$(or" with an equivalent "$(if" expression, to restore backward
compatibility. Also fix an issue where _get_attempt was called with only
one argument. This prevented the error message from printing the name of
the variable that can be used to fix the problem.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1357680156-15520-1-git-send-email-alcooperx@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It might be useful to see what's happening behind us rather than just
waiting few seconds during the config checking.
Also align the CHK message with other ones.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351241752-2919-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that the feature tests honours the V=1 make verbosity switch, add a
return to the main() routine in the python version test, to avoid this
distraction:
CHK python version
<stdin>: In function 'main':
<stdin>:5: warning: control reaches end of non-void function
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-999no5yxlc2oqo9xjeez5zmv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding more verbose output for compile time features checking, to ease
up debuging of feature detection failures.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-fbjha6xs5soyaiek8j4142xg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For cross-compiling on Android, some specific changes are needed in
the Makefile.
Update the Makefile to support cross-compiling for Android.
The original ideea for this was send by Bernhard Rosenkraenzer in
https://lkml.org/lkml/2012/8/23/316, but this is a rewrite.
Changes:
() support bionic in addition to glibc
() remove rt and pthread libraries that do not exist in Android
() use $(CFLAGS) when detecting initial compiler flags. This is needed
when setting CFLAGS as an argument of make (e.g. for setting --sysroot).
() include perf's local directory when building for Android to be able to find
relative paths if using --sysroot (e.g.: ../../include/linux/perf_event.h)
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Cc: Bernhard Rosenkraenzer <Bernhard.Rosenkranzer@linaro.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1349678613-7045-3-git-send-email-irina.tirdea@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
on_exit() is only available in new versions of glibc.
It is not implemented in Bionic and will lead to linking errors when
compiling for Android.
Implement a wrapper for on_exit using atexit.
The implementation for on_exit is the one sent by Bernhard Rosenkraenzer in
https://lkml.org/lkml/2012/8/23/316. The configuration part from the Makefile
is different than the one from the original patch.
Signed-off-by: Bernhard Rosenkraenzer <Bernhard.Rosenkranzer@linaro.org>
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Irina Tirdea <irina.tirdea@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1349678613-7045-2-git-send-email-irina.tirdea@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The newly added trace command requires an external audit library.
However it can cause a build error because it's not checked whether the
libaudit is installed on system:
CC builtin-trace.o
builtin-trace.c:7:22: fatal error: libaudit.h: No such file or directory
compilation terminated.
make: *** [builtin-trace.o] Error 1
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1348745018-21744-1-git-send-email-namhyung@kernel.org
[ committer note: Added ", disables 'trace tool' to the feature warning msg ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf has support for self-debugging by defining dump_stack function.
This function uses backtrace and backtrace_symbols functions defined as
GNU extensions.
In Android, bionic does not offer support for these functions and
compilation will fail with the following error:
target C: libperf <= tools/perf/util/util.c
tools/perf/util/util.c:4:22: fatal error: execinfo.h: No such file or directory
compilation terminated.
Add a compile-time option (NO_BACKTRACE) to enable or disable
self-debugging functionality in perf. This can also help in debugging
since it offers the possibility to turn on/off printing the backtrace.
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1347065004-15306-12-git-send-email-irina.tirdea@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding libunwind to be linked with perf if available. It's required
for the to get dwarf cfi unwinding support.
Also building perf with the dwarf call frame informations by default,
so that we can unwind callchains in perf itself.
Adding LIBUNWIND_DIR Makefile variable allowing user to specify
the directory with libunwind to be linked. This is used for
debug purposes.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-10-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The GtkInfoBar is a modern UI component to display messages without
bothering the main window. It'll be used for showing a warning message.
As the GtkInfoBar requires 2.18 (or newer) version of GTK+ library, add
availability check to Makefile too.
Suggested-by: Sunjin Yang <fan4326@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338265382-6872-7-git-send-email-namhyung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a simple GTK2-based browser to 'perf report' that's
based on the TTY-based browser in builtin-report.c.
To launch "perf report" using the new GTK interface just type:
$ perf report --gtk
The interface is somewhat limited in features at the moment:
- No callgraph support
- No KVM guest profiling support
- No color coding for percentages
- No sorting from the UI
- ..and many, many more!
That said, I think this patch a reasonable start to build future features on.
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Cc: Colin Walters <walters@verbum.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1202231952410.6689@tux.localdomain
[ committer note: Added #pragma to make gtk no strict prototype problem go
away as suggested by Colin Walters modulo avoiding push/pop ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The `try-cc' user-defined function was in tools/perf/feature-tests.mak;
this commit moves it to tools/perf/config/utilities.mak.
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Link: http://lkml.kernel.org/n/tip-bqhwcuxsrve0iodn6q4ejaoi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, Python 3 is not supported by perf's code; this
can cause the build to fail for systems that have Python 3
installed as the default python:
python{,-config}
The Correct Solution is to write compatibility code so that
Python 3 works out-of-the-box.
However, users often have an ancillary Python 2 installed:
python2{,-config}
Therefore, a quick fix is to allow the user to specify those
ancillary paths as the python binaries that Makefile should
use, thereby avoiding Python 3 altogether; as an added benefit,
the Python binaries may be installed in non-standard locations
without the need for updating any PATH variable.
This commit adds the ability to set PYTHON and/or PYTHON_CONFIG
either as environment variables or as make variables on the
command line; the paths may be relative, and usually only PYTHON
is necessary in order for PYTHON_CONFIG to be defined implicitly.
Some rudimentary error checking is performed when the user
explicitly specifies a value for any of these variables.
In addition, this commit introduces significantly robust makefile
infrastructure for working with paths and communicating with the
shell; it's currently only used for handling Python, but I hope
it will prove useful in refactoring the makefiles.
Thanks to:
Raghavendra D Prabhu <rprabhu@wnohang.net>
for motivating this patch.
Acked-by: Raghavendra D Prabhu <rprabhu@wnohang.net>
Link: http://lkml.kernel.org/r/e987828e-87ec-4973-95e7-47f10f5d9bab-mfwitten@gmail.com
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>