Граф коммитов

517 Коммитов

Автор SHA1 Сообщение Дата
Jeff Layton 16541ba11c cifs: handle errors from coalesce_t2
cifs_demultiplex_thread calls coalesce_t2 to try and merge follow-on t2
responses into the original mid buffer. coalesce_t2 however can return
errors, but the caller doesn't handle that situation properly. Fix the
thread to treat such a case as it would a malformed packet. Mark the
mid as being malformed and issue the callback.

Cc: stable@kernel.org
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-03 03:42:15 +00:00
Jeff Layton 146f9f65bd cifs: refactor mid finding loop in cifs_demultiplex_thread
...to reduce the extreme indentation. This should introduce no
behavioral changes.

Cc: stable@kernel.org
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-03 03:42:07 +00:00
Jeff Layton 2a2047bc94 cifs: sanitize length checking in coalesce_t2 (try #3)
There are a couple of places in this code where these values can wrap or
go negative, and that could potentially end up overflowing the buffer.
Ensure that that doesn't happen. Do all of the length calculation and
checks first, and only perform the memcpy after they pass.

Also, increase some stack variables to 32 bits to ensure that they don't
wrap without being detected.

Finally, change the error codes to be a bit more descriptive of any
problems detected. -EINVAL isn't very accurate.

Cc: stable@kernel.org
Reported-and-Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-04-29 05:02:08 +00:00
Pavel Shilovsky 4906e50b37 CIFS: Fix memory over bound bug in cifs_parse_mount_options
While password processing we can get out of options array bound if
the next character after array is delimiter. The patch adds a check
if we reach the end.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-04-21 17:22:43 +00:00
Steve French d9b9420137 [CIFS] Warn on requesting default security (ntlm) on mount
Warn once if default security (ntlm) requested. We will
update the default to the stronger security mechanism
(ntlmv2) in 2.6.41.  Kerberos is also stronger than
ntlm, but more servers support ntlmv2 and ntlmv2
does not require an upcall, so ntlmv2 is a better
default.

Reviewed-by: Jeff Layton <jlayton@redhat.com>
CC: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-04-12 01:27:45 +00:00
Steve French fd88ce9313 [CIFS] cifs: clarify the meaning of tcpStatus == CifsGood
When the TCP_Server_Info is first allocated and connected, tcpStatus ==
CifsGood means that the NEGOTIATE_PROTOCOL request has completed and the
socket is ready for other calls. cifs_reconnect however sets tcpStatus
to CifsGood as soon as the socket is reconnected and the optional
RFC1001 session setup is done. We have no clear way to tell the
difference between these two states, and we need to know this in order
to know whether we can send an echo or not.

Resolve this by adding a new statusEnum value -- CifsNeedNegotiate. When
the socket has been connected but has not yet had a NEGOTIATE_PROTOCOL
request done, set it to this value. Once the NEGOTIATE is done,
cifs_negotiate_protocol will set tcpStatus to CifsGood.

This also fixes and cleans the logic in cifs_reconnect and
cifs_reconnect_tcon. The old code checked for specific states when what
it really wants to know is whether the state has actually changed from
CifsNeedReconnect.

Reported-and-Tested-by: JG <jg@cms.ac>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-04-12 01:01:14 +00:00
Jeff Layton c0c7b905e9 cifs: clean up length checks in check2ndT2
Thus spake David Howells:

The code that follows this:

  	remaining = total_data_size - data_in_this_rsp;
	if (remaining == 0)
		return 0;
	else if (remaining < 0) {

generates better code if you drop the 'remaining' variable and compare
the values directly.

Clean it up per his recommendation...

Reported-and-acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-04-12 00:56:46 +00:00
Jeff Layton 7094564372 cifs: always do is_path_accessible check in cifs_mount
Currently, we skip doing the is_path_accessible check in cifs_mount if
there is no prefixpath. I have a report of at least one server however
that allows a TREE_CONNECT to a share that has a DFS referral at its
root. The reporter in this case was using a UNC that had no prefixpath,
so the is_path_accessible check was not triggered and the box later hit
a BUG() because we were chasing a DFS referral on the root dentry for
the mount.

This patch fixes this by removing the check for a zero-length
prefixpath.  That should make the is_path_accessible check be done in
this situation and should allow the client to chase the DFS referral at
mount time instead.

Cc: stable@kernel.org
Reported-and-Tested-by: Yogesh Sharma <ysharma@cymer.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-04-12 00:52:08 +00:00
Steve French 6da9791061 Elminate sparse __CHECK_ENDIAN__ warnings on port conversion
Ports are __be16 not unsigned short int

Eliminates the remaining fixable endian warnings:

~/cifs-2.6$ make modules C=1 M=fs/cifs CF=-D__CHECK_ENDIAN__
  CHECK   fs/cifs/connect.c
fs/cifs/connect.c:2408:23: warning: incorrect type in assignment (different base types)
fs/cifs/connect.c:2408:23:    expected unsigned short *sport
fs/cifs/connect.c:2408:23:    got restricted __be16 *<noident>
fs/cifs/connect.c:2410:23: warning: incorrect type in assignment (different base types)
fs/cifs/connect.c:2410:23:    expected unsigned short *sport
fs/cifs/connect.c:2410:23:    got restricted __be16 *<noident>
fs/cifs/connect.c:2416:24: warning: incorrect type in assignment (different base types)
fs/cifs/connect.c:2416:24:    expected unsigned short [unsigned] [short] <noident>
fs/cifs/connect.c:2416:24:    got restricted __be16 [usertype] <noident>
fs/cifs/connect.c:2423:24: warning: incorrect type in assignment (different base types)
fs/cifs/connect.c:2423:24:    expected unsigned short [unsigned] [short] <noident>
fs/cifs/connect.c:2423:24:    got restricted __be16 [usertype] <noident>
fs/cifs/connect.c:2326:23: warning: incorrect type in assignment (different base types)
fs/cifs/connect.c:2326:23:    expected unsigned short [unsigned] sport
fs/cifs/connect.c:2326:23:    got restricted __be16 [usertype] sin6_port
fs/cifs/connect.c:2330:23: warning: incorrect type in assignment (different base types)
fs/cifs/connect.c:2330:23:    expected unsigned short [unsigned] sport
fs/cifs/connect.c:2330:23:    got restricted __be16 [usertype] sin_port
fs/cifs/connect.c:2394:22: warning: restricted __be16 degrades to integer

Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-04-12 00:49:08 +00:00
Steve French 8727c8a85f Allow user names longer than 32 bytes
We artificially limited the user name to 32 bytes, but modern servers handle
larger.  Set the maximum length to a reasonable 256, and make the user name
string dynamically allocated rather than a fixed size in session structure.
Also clean up old checkpatch warning.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-04-12 00:42:06 +00:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Jeff Layton 71823baff1 cifs: don't always drop malformed replies on the floor (try #3)
Slight revision to this patch...use min_t() instead of conditional
assignment. Also, remove the FIXME comment and replace it with the
explanation that Steve gave earlier.

After receiving a packet, we currently check the header. If it's no
good, then we toss it out and continue the loop, leaving the caller
waiting on that response.

In cases where the packet has length inconsistencies, but the MID is
valid, this leads to unneeded delays. That's especially problematic now
that the client waits indefinitely for responses.

Instead, don't immediately discard the packet if checkSMB fails. Try to
find a matching mid_q_entry, mark it as having a malformed response and
issue the callback.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-02-11 03:59:12 +00:00
Jeff Layton 195291e68c cifs: clean up checks in cifs_echo_request
Follow-on patch to 7e90d705 which is already in Steve's tree...

The check for tcpStatus == CifsGood is not meaningful since it doesn't
indicate whether the NEGOTIATE request has been done. Also, clarify
why we're checking for maxBuf == 0.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-02-10 03:44:20 +00:00
Steve French 7e90d705fc [CIFS] Do not send SMBEcho requests on new sockets until SMBNegotiate
In order to determine whether an SMBEcho request can be sent
we need to know that the socket is established (server tcpStatus == CifsGood)
AND that an SMB NegotiateProtocol has been sent (server maxBuf != 0).
Without the second check we can send an Echo request during reconnection
before the server can accept it.

CC: JG <jg@cms.ac>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-02-08 23:52:32 +00:00
Jeff Layton 247ec9b418 cifs: don't send an echo request unless NegProt has been done
When the socket to the server is disconnected, the client more or less
immediately calls cifs_reconnect to reconnect the socket. The NegProt
and SessSetup however are not done until an actual call needs to be
made.

With the addition of the SMB echo code, it's possible that the server
will initiate a disconnect on an idle socket. The client will then
reconnect the socket but no NegotiateProtocol request is done. The
SMBEcho workqueue job will then eventually pop, and an SMBEcho will be
sent on the socket. The server will then reject it since no NegProt was
done.

The ideal fix would be to either have the socket not be reconnected
until we plan to use it, or to immediately do a NegProt when the
reconnect occurs. The code is not structured for this however. For now
we must just settle for not sending any echoes until the NegProt is
done.

Reported-by: JG <jg@cms.ac>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-02-05 03:02:14 +00:00
Shirish Pargaonkar 64474bdd07 cifs: Possible slab memory corruption while updating extended stats (repost)
Updating extended statistics here can cause slab memory corruption
if a callback function frees slab memory (mid_entry).

Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-02-04 20:18:06 +00:00
Jeff Layton 9587fcff42 cifs: fix length vs. total_read confusion in cifs_demultiplex_thread
length at this point is the length returned by the last kernel_recvmsg
call. total_read is the length of all of the data read so far. length
is more or less meaningless at this point, so use total_read for
everything.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-02-02 00:17:04 +00:00
Shirish Pargaonkar ee2c925850 cifs: More crypto cleanup (try #2)
Replaced md4 hashing function local to cifs module with kernel crypto APIs.
As a result, md4 hashing function and its supporting functions in
file md4.c are not needed anymore.

Cleaned up function declarations, removed forward function declarations,
and removed a header file that is being deleted from being included.

Verified that sec=ntlm/i, sec=ntlmv2/i, and sec=ntlmssp/i work correctly.

Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-27 19:58:13 +00:00
Pavel Shilovsky d39454ffe4 CIFS: Add strictcache mount option
Use for switching on strict cache mode. In this mode the
client reads from the cache all the time it has Oplock Level II,
otherwise - read from the server. As for write - the client stores
a data in the cache in Exclusive Oplock case, otherwise - write
directly to the server.

Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-25 19:31:38 +00:00
Rob Landley f1d0c99865 Make CIFS mount work in a container.
Teach cifs about network namespaces, so mounting uses adresses/routing
visible from the container rather than from init context.

A container is a chroot on steroids that changes more than just the root
filesystem the new processes see.  One thing containers can isolate is
"network namespaces", meaning each container can have its own set of
ethernet interfaces, each with its own own IP address and routing to the
outside world.  And if you open a socket in _userspace_ from processes
within such a container, this works fine.

But sockets opened from within the kernel still use a single global
networking context in a lot of places, meaning the new socket's address
and routing are correct for PID 1 on the host, but are _not_ what
userspace processes in the container get to use.

So when you mount a network filesystem from within in a container, the
mount code in the CIFS driver uses the host's networking context and not
the container's networking context, so it gets the wrong address, uses
the wrong routing, and may even try to go out an interface that the
container can't even access...  Bad stuff.

This patch copies the mount process's network context into the CIFS
structure that stores the rest of the server information for that mount
point, and changes the socket open code to use the saved network context
instead of the global network context.  I.E. "when you attempt to use
these addresses, do so relative to THIS set of network interfaces and
routing rules, not the old global context from back before we supported
containers".

The big long HOWTO sets up a test environment on the assumption you've
never used ocntainers before.  It basically says:

1) configure and build a new kernel that has container support
2) build a new root filesystem that includes the userspace container
control package (LXC)
3) package/run them under KVM (so you don't have to mess up your host
system in order to play with containers).
4) set up some containers under the KVM system
5) set up contradictory routing in the KVM system and the container so
that the host and the container see different things for the same address
6) try to mount a CIFS share from both contexts so you can both force it
to work and force it to fail.

For a long drawn out test reproduction sequence, see:

  http://landley.livejournal.com/47024.html
  http://landley.livejournal.com/47205.html
  http://landley.livejournal.com/47476.html

Signed-off-by: Rob Landley <rlandley@parallels.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-24 04:28:51 +00:00
Jeff Layton 26ec254869 cifs: fix unaligned access in check2ndT2 and coalesce_t2
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20 21:47:54 +00:00
Jeff Layton 690c522fa5 cifs: use get/put_unaligned functions to access ByteCount
It's possible that when we access the ByteCount that the alignment
will be off. Most CPUs deal with that transparently, but there's
usually some performance impact. Some CPUs raise an exception on
unaligned accesses.

Fix this by accessing the byte count using the get_unaligned and
put_unaligned inlined functions. While we're at it, fix the types
of some of the variables that end up getting returns from these
functions.

Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20 21:46:29 +00:00
Jeff Layton 7749981ec3 cifs: remove code for setting timeouts on requests
Since we don't time out individual requests anymore, remove the code
that we used to use for setting timeouts on different requests.

Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20 18:07:55 +00:00
Steve French fda3594362 [CIFS] cifs: reconnect unresponsive servers
If the server isn't responding to echoes, we don't want to leave tasks
hung waiting for it to reply. At that point, we'll want to reconnect
so that soft mounts can return an error to userspace quickly.

If the client hasn't received a reply after a specified number of echo
intervals, assume that the transport is down and attempt to reconnect
the socket.

The number of echo_intervals to wait before attempting to reconnect is
tunable via a module parameter. Setting it to 0, means that the client
will never attempt to reconnect. The default is 5.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
2011-01-20 18:06:34 +00:00
Jeff Layton c74093b694 cifs: set up recurring workqueue job to do SMB echo requests
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20 17:48:10 +00:00
Jeff Layton 2b84a36c55 cifs: allow for different handling of received response
In order to incorporate async requests, we need to allow for a more
general way to do things on receive, rather than just waking up a
process.

Turn the task pointer in the mid_q_entry into a callback function and a
generic data pointer. When a response comes in, or the socket is
reconnected, cifsd can call the callback function in order to wake up
the process.

The default is to just wake up the current process which should mean no
change in behavior for existing code.

Also, clean up the locking in cifs_reconnect. There doesn't seem to be
any need to hold both the srv_mutex and GlobalMid_Lock when walking the
list of mids.

Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20 17:43:59 +00:00
Shirish Pargaonkar 540b2e3777 cifs: Fix regression during share-level security mounts (Repost)
NTLM response length was changed to 16 bytes instead of 24 bytes
that are sent in Tree Connection Request during share-level security
share mounts.  Revert it back to 24 bytes.

Reported-and-Tested-by: Grzegorz Ozanski <grzegorz.ozanski@intel.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Cc: stable@kernel.org
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19 18:11:18 +00:00
Jeff Layton 8097531a5c cifs: clean up accesses to midCount
It's an atomic_t and the code accesses the "counter" field in it directly
instead of using atomic_read(). It also is sometimes accessed under a
spinlock and sometimes not. Move it out of the spinlock since we don't need
belt-and-suspenders for something that's just informational.

Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19 17:52:38 +00:00
Jeff Layton 9d78315b03 cifs: no need to mark smb_ses_list as cifs_demultiplex_thread is exiting
The TCP_Server_Info is refcounted and every SMB session holds a
reference to it. Thus, smb_ses_list is always going to be empty when
cifsd is coming down. This is dead code.

Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19 17:52:30 +00:00
Jeff Layton bd76331955 cifs: add cruid= mount option
In commit 3e4b3e1f we separated the "uid" mount option such that it
no longer determined the owner of the credential cache by default. When
we did this, we added a new option to cifs.upcall (--legacy-uid) to
try to make it so that it would behave the same was as it did before.

This ignored a rather important point -- the kernel has no way to know
what options are being passed to cifs.upcall, so it doesn't know what
uid it should use to determine whether to match an existing krb5 session.

The simplest solution is to simply add a new "cruid=" mount option that
only governs the uid owner of the credential cache for the mount.

Unfortunately, this means that the --legacy-uid option in cifs.upcall was
ill-considered and is now useless, but I don't see a better way to deal
with this.

A patch for the mount.cifs manpage will follow once this patch has been
accepted.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-14 18:51:11 +00:00
Jeff Layton b4d6fcf13f cifs: move "ntlmssp" and "local_leases" options out of experimental code
I see no real need to leave these sorts of options under an
EXPERIMENTAL ifdef. Since you need a mount option to turn this code
on, that only blows out the testing matrix.

local_leases has been under the EXPERIMENTAL tag for some time, but
it's only the mount option that's under this label. Move it out
from under this tag.

The NTLMSSP code is also under EXPERIMENTAL, but it needs a mount
option to turn it on, and in the future any distro will reasonably
want this enabled. Go ahead and move it out from under the
EXPERIMENTAL tag.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-09 23:39:17 +00:00
Jeff Layton 1397f2ee4b cifs: replace some hardcoded values with preprocessor constants
A number of places that deal with RFC1001/1002 negotiations have bare
"15" or "16" values. Replace them with RFC_1001_NAME_LEN and
RFC_1001_NAME_LEN_WITH_NULL.

The patch also cleans up some checkpatch warnings for code surrounding
the changes. This should apply cleanly on top of the patch to remove
Local_System_Name.

Reported-and-Reviwed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-09 23:39:12 +00:00
Pavel Shilovsky 4b886136df CIFS: Add match_port check during looking for an existing connection (try #4)
If we have a share mounted by non-standard port and try to mount another share
on the same host with standard port, we connect to the first share again -
that's wrong. This patch fixes this bug.

Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-06 19:07:53 +00:00
Pavel Shilovsky a9f1b85e5b CIFS: Simplify ipv*_connect functions into one (try #4)
Make connect logic more ip-protocol independent and move RFC1001 stuff into
a separate function. Also replace union addr in TCP_Server_Info structure
with sockaddr_storage.

Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-and-Tested-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-06 19:07:53 +00:00
Jeff Layton 7d161b7f41 cifs: allow calling cifs_build_path_to_root on incomplete cifs_sb
It's possible that cifs_mount will call cifs_build_path_to_root on a
newly instantiated cifs_sb. In that case, it's likely that the
master_tlink pointer has not yet been instantiated.

Fix this by having cifs_build_path_to_root take a cifsTconInfo pointer
as well, and have the caller pass that in.

Reported-and-Tested-by: Robbert Kouprie <robbert@exx.nl>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-12-07 19:25:37 +00:00
Jeff Layton 03ceace5c6 cifs: fix check of error return from is_path_accessable
This function will return 0 if everything went ok. Commit 9d002df4
however added a block of code after the following check for
rc == -EREMOTE. With that change and when rc == 0, doing the
"goto mount_fail_check" here skips that code, leaving the tlink_tree
and master_tlink pointer unpopulated. That causes an oops later
in cifs_root_iget.

Reported-and-Tested-by: Robbert Kouprie <robbert@exx.nl>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-12-07 19:17:59 +00:00
Jeff Layton 8846399968 cifs: remove Local_System_Name
...this string is zeroed out and nothing ever changes it.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-12-06 22:45:19 +00:00
Suresh Jayaraman 6d20e8406f cifs: add attribute cache timeout (actimeo) tunable
Currently, the attribute cache timeout for CIFS is hardcoded to 1 second. This
means that the client might have to issue a QPATHINFO/QFILEINFO call every 1
second to verify if something has changes, which seems too expensive. On the
other hand, if the timeout is hardcoded to a higher value, workloads that
expect strict cache coherency might see unexpected results.

Making attribute cache timeout as a tunable will allow us to make a tradeoff
between performance and cache metadata correctness depending on the
application/workload needs.

Add 'actimeo' tunable that can be used to tune the attribute cache timeout.
The default timeout is set to 1 second. Also, display actimeo option value in
/proc/mounts.

It appears to me that 'actimeo' and the proposed (but not yet merged)
'strictcache' option cannot coexist, so care must be taken that we reset the
other option if one of them is set.

Changes since last post:
   - fix option parsing and handle possible values correcly

Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-12-02 19:32:11 +00:00
Suresh Jayaraman 607a569da4 cifs: allow fsc mount option only if CONFIG_CIFS_FSCACHE is set
Currently, it is possible to specify 'fsc' mount option even if
CONFIG_CIFS_FSCACHE has not been set. The option is being ignored silently
while the user fscache functionality to work. Fix this by raising error when
the CONFIG option is not set.

Reported-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-11-30 05:49:28 +00:00
Suresh Jayaraman 6ef933a38a cifs: trivial comment fix: tlink_tree is now a rbtree
Noticed while reviewing (late) the rbtree conversion patchset (which has been merged
already).

Cc: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-11-04 19:35:30 +00:00
Jeff Layton b647c35f77 cifs: convert tlink_tree to a rbtree
Radix trees are ideal when you want to track a bunch of pointers and
can't embed a tracking structure within the target of those pointers.
The tradeoff is an increase in memory, particularly if the tree is
sparse.

In CIFS, we use the tlink_tree to track tcon_link structs. A tcon_link
can never be in more than one tlink_tree, so there's no impediment to
using a rb_tree here instead of a radix tree.

Convert the new multiuser mount code to use a rb_tree instead. This
should reduce the memory required to manage the tlink_tree.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-11-02 19:20:23 +00:00
Jeff Layton 413e661c13 cifs: store pointer to master tlink in superblock (try #2)
This is the second version of this patch, the only difference between
it and the first one is that this explicitly makes cifs_sb_master_tlink
a static inline.

Instead of keeping a tag on the master tlink in the tree, just keep a
pointer to the master in the superblock. That eliminates the need for
using the radix tree to look up a tagged entry.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-11-02 19:15:09 +00:00
Shirish Pargaonkar d3686d54c7 cifs: Cleanup and thus reduce smb session structure and fields used during authentication
Removed following fields from smb session structure
 cryptkey, ntlmv2_hash, tilen, tiblob
and ntlmssp_auth structure is allocated dynamically only if the auth mech
in NTLMSSP.

response field within a session_key structure is used to initially store the
target info (either plucked from type 2 challenge packet in case of NTLMSSP
or fabricated in case of NTLMv2 without extended security) and then to store
Message Authentication Key (mak) (session key + client response).

Server challenge or cryptkey needed during a NTLMSSP authentication
is now part of ntlmssp_auth structure which gets allocated and freed
once authenticaiton process is done.

Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-29 01:47:33 +00:00
Shirish Pargaonkar d3ba50b17a NTLM auth and sign - Use appropriate server challenge
Need to have cryptkey or server challenge in smb connection
(struct TCP_Server_Info) for ntlm and ntlmv2 auth types for which
cryptkey (Encryption Key) is supplied just once in Negotiate Protocol
response during an smb connection setup for all the smb sessions over
that smb connection.

For ntlmssp, cryptkey or server challenge is provided for every
smb session in type 2 packet of ntlmssp negotiation, the cryptkey
provided during Negotiation Protocol response before smb connection
does not count.

Rename cryptKey to cryptkey and related changes.

Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-29 01:47:30 +00:00
Shirish Pargaonkar f7c5445a9d NTLM auth and sign - minor error corrections and cleanup
Minor cleanup - Fix spelling mistake, make meaningful (goto) label

In function setup_ntlmv2_rsp(), do not return 0 and leak memory,
let the tiblob get freed.

For function find_domain_name(), pass already available nls table pointer
instead of loading and unloading the table again in this function.

For ntlmv2, the case sensitive password length is the length of the
response, so subtract session key length (16 bytes) from the .len.

Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-27 02:04:30 +00:00
Shirish Pargaonkar d2b915210b NTLM auth and sign - Define crypto hash functions and create and send keys needed for key exchange
Mark dependency on crypto modules in Kconfig.

Defining per structures sdesc and cifs_secmech which are used to store
crypto hash functions and contexts.  They are stored per smb connection
and used for all auth mechs to genereate hash values and signatures.

Allocate crypto hashing functions, security descriptiors, and respective
contexts when a smb/tcp connection is established.
Release them when a tcp/smb connection is taken down.

md5 and hmac-md5 are two crypto hashing functions that are used
throught the life of an smb/tcp connection by various functions that
calcualte signagure and ntlmv2 hash, HMAC etc.

structure ntlmssp_auth is defined as per smb connection.

ntlmssp_auth holds ciphertext which is genereated by rc4/arc4 encryption of
secondary key, a nonce using ntlmv2 session key and sent in the session key
field of the type 3 message sent by the client during ntlmssp
negotiation/exchange

A key is exchanged with the server if client indicates so in flags in
type 1 messsage and server agrees in flag in type 2 message of ntlmssp
negotiation.  If both client and agree, a key sent by client in
type 3 message of ntlmssp negotiation in the session key field.
The key is a ciphertext generated off of secondary key, a nonce, using
ntlmv2 hash via rc4/arc4.

Signing works for ntlmssp in this patch. The sequence number within
the server structure needs to be zero until session is established
i.e. till type 3 packet of ntlmssp exchange of a to be very first
smb session on that smb connection is sent.

Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-26 18:35:31 +00:00
Dan Carpenter b235f371a2 cifs: cifs_convert_address() returns zero on error
The cifs_convert_address() returns zero on error but this caller is
testing for negative returns.

Btw. "i" is unsigned here, so it's never negative.

Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-26 18:22:38 +00:00
Shirish Pargaonkar 21e733930b NTLM auth and sign - Allocate session key/client response dynamically
Start calculating auth response within a session.  Move/Add pertinet
data structures like session key, server challenge and ntlmv2_hash in
a session structure.  We should do the calculations within a session
before copying session key and response over to server data
structures because a session setup can fail.

Only after a very first smb session succeeds, it copy/make its
session key, session key of smb connection.  This key stays with
the smb connection throughout its life.
sequence_number within server is set to 0x2.

The authentication Message Authentication Key (mak) which consists
of session key followed by client response within structure session_key
is now dynamic.  Every authentication type allocates the key + response
sized memory within its session structure and later either assigns or
frees it once the client response is sent and if session's session key
becomes connetion's session key.

ntlm/ntlmi authentication functions are rearranged.  A function
named setup_ntlm_resp(), similar to setup_ntlmv2_resp(), replaces
function cifs_calculate_session_key().

size of CIFS_SESS_KEY_SIZE is changed to 16, to reflect the byte size
of the key it holds.

Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-26 18:20:10 +00:00
Suresh Jayaraman 3f9bcca782 cifs: convert cifs_tcp_ses_lock from a rwlock to a spinlock
cifs_tcp_ses_lock is a rwlock with protects the cifs_tcp_ses_list,
server->smb_ses_list and the ses->tcon_list. It also protects a few
ref counters in server, ses and tcon. In most cases the critical section
doesn't seem to be large, in a few cases where it is slightly large, there
seem to be really no benefit from concurrent access. I briefly considered RCU
mechanism but it appears to me that there is no real need.

Replace it with a spinlock and get rid of the last rwlock in the cifs code.

Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-21 13:14:27 +00:00
Shirish Pargaonkar 5d0d28824c NTLM authentication and signing - Calculate auth response per smb session
Start calculation auth response within a session.  Move/Add pertinet
data structures like session key, server challenge and ntlmv2_hash in
a session structure.  We should do the calculations within a session
before copying session key and response over to server data
structures because a session setup can fail.

Only after a very first smb session succeeds, it copies/makes its
session key, session key of smb connection.  This key stays with
the smb connection throughout its life.

Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-14 18:05:19 +00:00
Steve French d244555613 [CIFS] Remove build warning
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-08 03:38:46 +00:00
Jeff Layton 2de970ff69 cifs: implement recurring workqueue job to prune old tcons
Create a workqueue job that cleans out unused tlinks. For now, it uses
a hardcoded expire time of 10 minutes. When it's done, the work rearms
itself. On umount, the work is cancelled before tearing down the tlink
tree.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-08 03:31:21 +00:00
Jeff Layton 0eb8a132c4 cifs: add "multiuser" mount option
This allows someone to declare a mount as a multiuser mount.

Multiuser mounts also imply "noperm" since we want to allow the server
to handle permission checking. It also (for now) requires Kerberos
authentication. Eventually, we could expand this to other authtypes, but
that requires a scheme to allow per-user credential stashing in some
form.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-07 18:30:45 +00:00
Jeff Layton 9d002df492 cifs: add routines to build sessions and tcons on the fly
This patch is rather large, but it's a bit difficult to do piecemeal...

For non-multiuser mounts, everything will basically work as it does
today. A call to cifs_sb_tlink will return the "master" tcon link.

Turn the tcon pointer in the cifs_sb into a radix tree that uses the
fsuid of the process as a key. The value is a new "tcon_link" struct
that contains info about a tcon that's under construction.

When a new process needs a tcon, it'll call cifs_sb_tcon. That will
then look up the tcon_link in the radix tree. If it exists and is
valid, it's returned.

If it doesn't exist, then we stuff a new tcon_link into the tree and
mark it as pending and then go and try to build the session/tcon.
If that works, the tcon pointer in the tcon_link is updated and the
pending flag is cleared.

If the construction fails, then we set the tcon pointer to an ERR_PTR
and clear the pending flag.

If the radix tree is searched and the tcon_link is marked pending
then we go to sleep and wait for the pending flag to be cleared.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-07 18:18:00 +00:00
Jeff Layton 0d424ad0a4 cifs: add cifs_sb_master_tcon and convert some callers to use it
At mount time, we'll always need to create a tcon that will serve as a
template for others that are associated with the mount. This tcon is
known as the "master" tcon.

In some cases, we'll need to use that tcon regardless of who's accessing
the mount. Add an accessor function for the master tcon and go ahead and
switch the appropriate places to use it.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-29 19:04:33 +00:00
Jeff Layton f6acb9d059 cifs: temporarily rename cifs_sb->tcon to ptcon to catch stragglers
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-29 19:04:33 +00:00
Jeff Layton a6e8a8455c cifs: add function to get a tcon from cifs_sb
When we convert cifs to do multiple sessions per mount, we'll need more
than one tcon per superblock. At that point "cifs_sb->tcon" will make
no sense. Add a new accessor function that gets a tcon given a cifs_sb.
For now, it just returns cifs_sb->tcon. Later it'll do more.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-29 19:04:32 +00:00
Steve French d3bf5221d3 [CIFS] Fix ordering of cleanup on module init failure
If registering fs cache failed, we weren't cleaning up proc.

Acked-by: Jeff Layton <jlayton@redhat.com>
CC: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-29 19:04:32 +00:00
Jeff Layton ab9db8b737 cifs: allow matching of tcp sessions in CifsNew state
With commit 7332f2a621, cifsd will no
longer exit when the socket abends and the tcpStatus is CifsNew. With
that change, there's no reason to avoid matching an existing session in
this state.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-29 19:04:31 +00:00
Stefan Metzmacher 736a332059 cifs: add "mfsymlinks" mount option
This is the start for an implementation of "Minshall+French Symlinks"
(see http://wiki.samba.org/index.php/UNIX_Extensions#Minshall.2BFrench_symlinks).

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-29 19:04:31 +00:00
Ben Greear 3eb9a8893a cifs: Allow binding to local IP address.
When using multi-homed machines, it's nice to be able to specify
the local IP to use for outbound connections.  This patch gives
cifs the ability to bind to a particular IP address.

   Usage:  mount -t cifs -o srcaddr=192.168.1.50,user=foo, ...
   Usage:  mount -t cifs -o srcaddr=2002:💯1,user=foo, ...

Acked-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Dr. David Holder <david.holder@erion.co.uk>
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-29 19:04:29 +00:00
Shirish Pargaonkar 2b149f1197 cifs NTLMv2/NTLMSSP ntlmv2 within ntlmssp autentication code
Attribue Value (AV) pairs or Target Info (TI) pairs are part of
ntlmv2 authentication.
Structure ntlmv2_resp had only definition for two av pairs.
So removed it, and now allocation of av pairs is dynamic.
For servers like Windows 7/2008, av pairs sent by server in
challege packet (type 2 in the ntlmssp exchange/negotiation) can
vary.

Server sends them during ntlmssp negotiation. So when ntlmssp is used
as an authentication mechanism, type 2 challenge packet from server
has this information.  Pluck it and use the entire blob for
authenticaiton purpose.  If user has not specified, extract
(netbios) domain name from the av pairs which is used to calculate
ntlmv2 hash.  Servers like Windows 7 are particular about the AV pair
blob.

Servers like Windows 2003, are not very strict about the contents
of av pair blob used during ntlmv2 authentication.
So when security mechanism such as ntlmv2 is used (not ntlmv2 in ntlmssp),
there is no negotiation and so genereate a minimal blob that gets
used in ntlmv2 authentication as well as gets sent.

Fields tilen and tilbob are session specific.  AV pair values are defined.

To calculate ntlmv2 response we need ti/av pair blob.

For sec mech like ntlmssp, the blob is plucked from type 2 response from
the server.  From this blob, netbios name of the domain is retrieved,
if user has not already provided, to be included in the Target String
as part of ntlmv2 hash calculations.

For sec mech like ntlmv2, create a minimal, two av pair blob.

The allocated blob is freed in case of error.  In case there is no error,
this blob is used in calculating ntlmv2 response (in CalcNTLMv2_response)
and is also copied on the response to the server, and then freed.

The type 3 ntlmssp response is prepared on a buffer,
5 * sizeof of struct _AUTHENTICATE_MESSAGE, an empirical value large
enough to hold _AUTHENTICATE_MESSAGE plus a blob with max possible
10 values as part of ntlmv2 response and lmv2 keys and domain, user,
workstation  names etc.

Also, kerberos gets selected as a default mechanism if server supports it,
over the other security mechanisms.

Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-29 19:04:29 +00:00
Jeff Layton 460cf3411b cifs: fix potential double put of TCP session reference
cifs_get_smb_ses must be called on a server pointer on which it holds an
active reference. It first does a search for an existing SMB session. If
it finds one, it'll put the server reference and then try to ensure that
the negprot is done, etc.

If it encounters an error at that point then it'll return an error.
There's a potential problem here though. When cifs_get_smb_ses returns
an error, the caller will also put the TCP server reference leading to a
double-put.

Fix this by having cifs_get_smb_ses only put the server reference if
it found an existing session that it could use and isn't returning an
error.

Cc: stable@kernel.org
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-14 23:21:03 +00:00
Jeff Layton 32670396e7 cifs: prevent possible memory corruption in cifs_demultiplex_thread
cifs_demultiplex_thread sets the addr.sockAddr.sin_port without any
regard for the socket family. While it may be that the error in question
here never occurs on an IPv6 socket, it's probably best to be safe and
set the port properly if it ever does.

Break the port setting code out of cifs_fill_sockaddr and into a new
function, and call that from cifs_demultiplex_thread.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-08 21:22:35 +00:00
Jeff Layton 7332f2a621 cifs: eliminate some more premature cifsd exits
If the tcpStatus is still CifsNew, the main cifs_demultiplex_loop can
break out prematurely in some cases. This is wrong as we will almost
always have other structures with pointers to the TCP_Server_Info. If
the main loop breaks under any other condition other than tcpStatus ==
CifsExiting, then it'll face a use-after-free situation.

I don't see any reason to treat a CifsNew tcpStatus differently than
CifsGood. I believe we'll still want to attempt to reconnect in either
case. What should happen in those situations is that the MIDs get marked
as MID_RETRY_NEEDED. This will make CIFSSMBNegotiate return -EAGAIN, and
then the caller can retry the whole thing on a newly reconnected socket.
If that fails again in the same way, the caller of cifs_get_smb_ses
should tear down the TCP_Server_Info struct.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-08 21:22:33 +00:00
Jeff Layton 522bbe65a2 cifs: prevent cifsd from exiting prematurely
When cifs_demultiplex_thread exits, it does a number of cleanup tasks
including freeing the TCP_Server_Info struct. Much of the existing code
in cifs assumes that when there is a cisfSesInfo struct, that it holds a
reference to a valid TCP_Server_Info struct.

We can never allow cifsd to exit when a cifsSesInfo struct is still
holding a reference to the server. The server pointers will then point
to freed memory.

This patch eliminates a couple of questionable conditions where it does
this.  The idea here is to make an -EINTR return from kernel_recvmsg
behave the same way as -ERESTARTSYS or -EAGAIN. If the task was
signalled from cifs_put_tcp_session, then tcpStatus will be CifsExiting,
and the kernel_recvmsg call will return quickly.

There's also another condition where this can occur too -- if the
tcpStatus is still in CifsNew, then it will also exit if the server
closes the socket prematurely.  I think we'll probably also need to fix
that situation, but that requires a bit more consideration.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-08 21:22:30 +00:00
Steve French c8e56f1f4f Revert "[CIFS] Fix ntlmv2 auth with ntlmssp"
This reverts commit 9fbc590860.

The change to kernel crypto and fixes to ntlvm2 and ntlmssp
series, introduced a regression.  Deferring this patch series
to 2.6.37 after Shirish fixes it.

Signed-off-by: Steve French <sfrench@us.ibm.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
CC: Shirish Pargaonkar <shirishp@us.ibm.com>
2010-09-08 21:10:58 +00:00
Jeff Layton 24e6cf92fd cifs: check for NULL session password
It's possible for a cifsSesInfo struct to have a NULL password, so we
need to check for that prior to running strncmp on it.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-23 17:38:31 +00:00
Steve French 9fbc590860 [CIFS] Fix ntlmv2 auth with ntlmssp
Make ntlmv2 as an authentication mechanism within ntlmssp
instead of ntlmv1.
Parse type 2 response in ntlmssp negotiation to pluck
AV pairs and use them to calculate ntlmv2 response token.
Also, assign domain name from the sever response in type 2
packet of ntlmssp and use that (netbios) domain name in
calculation of response.

Enable cifs/smb signing using rc4 and md5.

Changed name of the structure mac_key to session_key to reflect
the type of key it holds.

Use kernel crypto_shash_* APIs instead of the equivalent cifs functions.

Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-20 20:42:26 +00:00
Jeff Layton fc87a40677 cifs: fix NULL pointer dereference in cifs_find_smb_ses
cifs_find_smb_ses assumes that the vol->password field is a valid
pointer, but that's only the case if a password was passed in via
the options string. It's possible that one won't be if there is
no mount helper on the box.

Reported-by: diabel <gacek-2004@wp.pl>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-18 17:26:25 +00:00
David Howells 67b7626a05 CIFS: Make cifs_convert_address() take a const src pointer and a length
Make cifs_convert_address() take a const src pointer and a length so that all
the strlen() calls in their can be cut out and to make it unnecessary to modify
the src string.

Also return the data length from dns_resolve_server_name_to_ip() so that a
strlen() can be cut out of cifs_compose_mount_options() too.

Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-05 17:17:50 +00:00
Jeff Layton cb76d5e250 cifs: fsc should not default to "on"
I'm not sure why this was merged with this flag hardcoded on, but it
seems quite dangerous. Turn it off.

Also, mount.cifs hands unrecognized options off to the kernel so there
should be no need for changes there in order to support this.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-02 12:40:41 +00:00
Jeff Layton f636a34802 cifs: ignore the "mand", "nomand" and "_netdev" mount options
These are all handled by the userspace mount programs, but older versions
of mount.cifs also handed them off to the kernel. Ignore them.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-02 12:40:40 +00:00
Steve French 9f841593ff [CIFS] relinquish fscache cookie before freeing CIFSTconInfo
Doh, fix a use after free bug.

Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-and-Tested-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-02 12:40:39 +00:00
Jeff Layton 3e4b3e1f68 cifs: add separate cred_uid field to sesInfo
Right now, there's no clear separation between the uid that owns the
credentials used to do the mount and the overriding owner of the files
on that mount.

Add a separate cred_uid field that is set to the real uid
of the mount user. Unlike the linux_uid, the uid= option does not
override this parameter. The parm is sent to cifs.upcall, which can then
preferentially use the creduid= parm instead of the uid= parm for
finding credentials.

This is not the only way to solve this. We could try to do all of this
in kernel instead by having a module parameter that affects what gets
passed in the uid= field of the upcall. That said, we have a lot more
flexibility to change things in userspace so I think it probably makes
sense to do it this way.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-02 12:40:39 +00:00
Suresh Jayaraman fa1df75d4d cifs: add mount option to enable local caching
Add a mount option 'fsc' to enable local caching on CIFS.

I considered adding a separate debug bit for caching, but it appears that
debugging would be relatively easier with the normal CIFS_INFO level.

As the cifs-utils (userspace) changes are not done yet, this patch enables
'fsc' by default to enable testing.

Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-02 12:40:37 +00:00
Suresh Jayaraman d03382ce9a cifs: define superblock-level cache index objects and register them
Define superblock-level cache index objects (managed by cifsTconInfo structs).
Each superblock object is created in a server-level index object and in itself
an index into which inode-level objects are inserted.

The superblock object is keyed by sharename. The UniqueId/IndexNumber is used to
validate that the exported share is the same since we accessed it last time.

Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-02 12:40:36 +00:00
Jeff Layton 4ff67b720c cifs: clean up cifs_find_smb_ses (try #2)
This patch replaces the earlier patch by the same name. The only
difference is that MAX_PASSWORD_SIZE has been increased to attempt to
match the limits that windows enforces.

Do a better job of matching sessions by authtype. Matching by username
for a Kerberos session is incorrect, and anonymous sessions need special
handling.

Also, in the case where we do match by username, we also need to match
by password. That ensures that someone else doesn't "borrow" an existing
session without needing to know the password.

Finally, passwords can be longer than 16 bytes. Bump MAX_PASSWORD_SIZE
to 512 to match the size that the userspace mount helper allows.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-02 12:40:35 +00:00
Jeff Layton daf5b0b6f3 cifs: match secType when searching for existing tcp session
The secType is a per-tcp session entity, but the current routine doesn't
verify that it is acceptible when attempting to match an existing TCP
session.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-02 12:40:35 +00:00
Jeff Layton 4515148ef7 cifs: move address comparison into separate function
Move the address comparator out of cifs_find_tcp_session and into a
separate function for cleanliness. Also change the argument to
that function to a "struct sockaddr" pointer. Passing pointers to
sockaddr_storage is a little odd since that struct is generally for
declaring static storage.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-02 12:40:34 +00:00
Jeff Layton 50d971602a cifs: set the port in sockaddr in a more clearly defined fashion
This patch should replace the patch I sent a couple of weeks ago to
set the port in cifs_convert_address.

Currently we set this in cifs_find_tcp_session, but that's more of a
side effect than anything. Add a new function called cifs_fill_sockaddr.
Have it call cifs_convert_address and then set the port.

This also allows us to skip passing in the port as a separate parm to
cifs_find_tcp_session.

Also, change cifs_convert_address take a struct sockaddr * rather than
void * to make it clearer how this function should be called.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-02 12:40:34 +00:00
Suresh Jayaraman 488f1d2d6c cifs: define server-level cache index objects and register them
Define server-level cache index objects (as managed by TCP_ServerInfo structs)
and register then with FS-Cache. Each server object is created in the CIFS
top-level index object and is itself an index into which superblock-level
objects are inserted.

The server objects are now keyed by {IPaddress,family,port} tuple.

Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-02 12:40:34 +00:00
Jeff Layton 198b568278 cifs: break negotiate protocol calls out of cifs_setup_session
So that we can reasonably set up the secType based on both the
NegotiateProtocol response and the parsed mount options.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-05-05 23:18:27 +00:00
Jeff Layton ebe6aa5ac4 cifs: eliminate "first_time" parm to CIFS_SessSetup
We can use the is_first_ses_reconnect() function to determine this.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-04-28 00:36:17 +00:00
Dan Carpenter ad6cca6d5d cifs: change && to ||
This is a typo, if pvolume_info were NULL it would oops.

This function is used in clean up and error handling.  The current code
never passes a NULL pvolume_info, but it could pass a NULL *pvolume_info
if the kmalloc() failed.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-04-26 19:08:01 +00:00
Jeff Layton 04912d6a20 cifs: rename "extended_security" to "global_secflags"
...since that more accurately describes what that variable holds.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-04-26 18:55:33 +00:00
Jeff Layton d00c28de55 cifs: move tcon find/create into separate function
...and out of cifs_mount.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-04-26 18:55:31 +00:00
Jeff Layton 36988c76f0 cifs: move SMB session creation code into separate function
...it's mostly part of cifs_mount. Break it out into a separate
function.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-04-26 18:55:28 +00:00
Jeff Layton a5fc4ce018 cifs: track local_nls in volume info
Add a local_nls field to the smb_vol struct and keep a pointer to the
local_nls in it.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-04-26 18:54:54 +00:00
Joe Perches b6b38f704a [CIFS] Neaten cERROR and cFYI macros, reduce text space
Neaten cERROR and cFYI macros, reduce text space
~2.5K

Convert '__FILE__ ": " fmt' to '"%s: " fmt', __FILE__' to save text space
Surround macros with do {} while
Add parentheses to macros
Make statement expression macro from macro with assign
Remove now unnecessary parentheses from cFYI and cERROR uses

defconfig with CIFS support old
$ size fs/cifs/built-in.o
   text	   data	    bss	    dec	    hex	filename
 156012	   1760	    148	 157920	  268e0	fs/cifs/built-in.o

defconfig with CIFS support old
$ size fs/cifs/built-in.o
   text	   data	    bss	    dec	    hex	filename
 153508	   1760	    148	 155416	  25f18	fs/cifs/built-in.o

allyesconfig old:
$ size fs/cifs/built-in.o
   text	   data	    bss	    dec	    hex	filename
 309138	   3864	  74824	 387826	  5eaf2	fs/cifs/built-in.o

allyesconfig new
$ size fs/cifs/built-in.o
   text	   data	    bss	    dec	    hex	filename
 305655	   3864	  74824	 384343	  5dd57	fs/cifs/built-in.o

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-04-21 03:50:45 +00:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Steve French d7b619cf56 [CIFS] pSesInfo->sesSem is used as mutex. Rename it to session_mutex and
convert it to a real mutex.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-02-25 05:36:46 +00:00
Steve French 6a5fa2362b [CIFS] Add support for TCP_NODELAY
mount option sockopt=TCP_NODELAY helpful for faster networks
boosting performance.  Kernel bugzilla bug number 14032.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-01-01 01:28:43 +00:00
Jeff Layton a2934c7b36 cifs: NULL out tcon, pSesInfo, and srvTcp pointers when chasing DFS referrals
The scenario is this:

The kernel gets EREMOTE and starts chasing a DFS referral at mount time.
The tcon reference is put, which puts the session reference too, but
neither pointer is zeroed out.

The mount gets retried (goto try_mount_again) with new mount info.
Session setup fails fails and rc ends up being non-zero. The code then
falls through to the end and tries to put the previously freed tcon
pointer again.  Oops at: cifs_put_smb_ses+0x14/0xd0

Fix this by moving the initialization of the rc variable and the tcon,
pSesInfo and srvTcp pointers below the try_mount_again label. Also, add
a FreeXid() before the goto to prevent xid "leaks".

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reported-by: Gustavo Carvalho Homem <gustavo@angulosolido.pt>
CC: stable <stable@kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-12-03 16:12:41 +00:00
Jeff Layton f475f67754 cifs: don't use CIFSGetSrvInodeNumber in is_path_accessible
Because it's lighter weight, CIFS tries to use CIFSGetSrvInodeNumber to
verify the accessibility of the root inode and then falls back to doing a
full QPathInfo if that fails with -EOPNOTSUPP. I have at least a report
of a server that returns NT_STATUS_INTERNAL_ERROR rather than something
that translates to EOPNOTSUPP.

Rather than trying to be clever with that call, just have
is_path_accessible do a normal QPathInfo. That call is widely
supported and it shouldn't increase the overhead significantly.

Cc: Stable <stable@kernel.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-11-06 22:06:14 +00:00
Steve French 8347a5cdd1 [CIFS] Fixing to avoid invalid kfree() in cifs_get_tcp_session()
trivial bug in fs/cifs/connect.c .
The bug is caused by fail of extract_hostname()
when mounting cifs file system.

This is the situation when I noticed this bug.

% sudo mount -t cifs //192.168.10.208 mountpoint -o options...

Then my kernel says,

[ 1461.807776] ------------[ cut here ]------------
[ 1461.807781] kernel BUG at mm/slab.c:521!
[ 1461.807784] invalid opcode: 0000 [#2] PREEMPT SMP
[ 1461.807790] last sysfs file:
/sys/devices/pci0000:00/0000:00:1e.0/0000:09:02.0/resource
[ 1461.807793] CPU 0
[ 1461.807796] Modules linked in: nls_iso8859_1 usbhid sbp2 uhci_hcd
ehci_hcd i2c_i801 ohci1394 ieee1394 psmouse serio_raw pcspkr sky2 usbcore
evdev
[ 1461.807816] Pid: 3446, comm: mount Tainted: G      D 2.6.32-rc2-vanilla
[ 1461.807820] RIP: 0010:[<ffffffff810b888e>]  [<ffffffff810b888e>]
kfree+0x63/0x156
[ 1461.807829] RSP: 0018:ffff8800b4f7fbb8  EFLAGS: 00010046
[ 1461.807832] RAX: ffffea00033fff98 RBX: ffff8800afbae7e2 RCX:
0000000000000000
[ 1461.807836] RDX: ffffea0000000000 RSI: 000000000000005c RDI:
ffffffffffffffea
[ 1461.807839] RBP: ffff8800b4f7fbf8 R08: 0000000000000001 R09:
0000000000000000
[ 1461.807842] R10: 0000000000000000 R11: ffff8800b4f7fbf8 R12:
00000000ffffffea
[ 1461.807845] R13: ffff8800afb23000 R14: ffff8800b4f87bc0 R15:
ffffffffffffffea
[ 1461.807849] FS:  00007f52b6f187c0(0000) GS:ffff880007600000(0000)
knlGS:0000000000000000
[ 1461.807852] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1461.807855] CR2: 0000000000613000 CR3: 00000000af8f9000 CR4:
00000000000006f0
[ 1461.807858] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 1461.807861] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 1461.807865] Process mount (pid: 3446, threadinfo ffff8800b4f7e000, task
ffff8800950e4380)
[ 1461.807867] Stack:
[ 1461.807869]  0000000000000202 0000000000000282 ffff8800b4f7fbf8
ffff8800afbae7e2
[ 1461.807876] <0> 00000000ffffffea ffff8800afb23000 ffff8800b4f87bc0
ffff8800b4f7fc28
[ 1461.807884] <0> ffff8800b4f7fcd8 ffffffff81159f6d ffffffff81147bc2
ffffffff816bfb48
[ 1461.807892] Call Trace:
[ 1461.807899]  [<ffffffff81159f6d>] cifs_get_tcp_session+0x440/0x44b
[ 1461.807904]  [<ffffffff81147bc2>] ? find_nls+0x1c/0xe9
[ 1461.807909]  [<ffffffff8115b889>] cifs_mount+0x16bc/0x2167
[ 1461.807917]  [<ffffffff814455bd>] ? _spin_unlock+0x30/0x4b
[ 1461.807923]  [<ffffffff81150da9>] cifs_get_sb+0xa5/0x1a8
[ 1461.807928]  [<ffffffff810c1b94>] vfs_kern_mount+0x56/0xc9
[ 1461.807933]  [<ffffffff810c1c64>] do_kern_mount+0x47/0xe7
[ 1461.807938]  [<ffffffff810d8632>] do_mount+0x712/0x775
[ 1461.807943]  [<ffffffff810d671f>] ? copy_mount_options+0xcf/0x132
[ 1461.807948]  [<ffffffff810d8714>] sys_mount+0x7f/0xbf
[ 1461.807953]  [<ffffffff8144509a>] ? lockdep_sys_exit_thunk+0x35/0x67
[ 1461.807960]  [<ffffffff81011cc2>] system_call_fastpath+0x16/0x1b
[ 1461.807963] Code: 00 00 00 00 ea ff ff 48 c1 e8 0c 48 6b c0 68 48 01 d0
66 83 38 00 79 04 48 8b 40 10 66 83 38 00 79 04 48 8b 40 10 80 38 00 78 04
<0f> 0b eb fe 4c 8b 70 58 4c 89 ff 41 8b 76 4c e8 b8 49 fb ff e8
[ 1461.808022] RIP  [<ffffffff810b888e>] kfree+0x63/0x156
[ 1461.808027]  RSP <ffff8800b4f7fbb8>
[ 1461.808031] ---[ end trace ffe26fcdc72c0ce4 ]---

The reason of this bug is that the error handling code of
cifs_get_tcp_session()
calls kfree() when corresponding kmalloc() failed.
(The kmalloc() is called by extract_hostname().)

Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
CC: Stable <stable@kernel.org>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-10-06 18:31:29 +00:00
Jeff Layton 3bc303c254 cifs: convert oplock breaks to use slow_work facility (try #4)
This is the fourth respin of the patch to convert oplock breaks to
use the slow_work facility.

A customer of ours was testing a backport of one of the earlier
patchsets, and hit a "Busy inodes after umount..." problem. An oplock
break job had raced with a umount, and the superblock got torn down and
its memory reused. When the oplock break job tried to dereference the
inode->i_sb, the kernel oopsed.

This patchset has the oplock break job hold an inode and vfsmount
reference until the oplock break completes.  With this, there should be
no need to take a tcon reference (the vfsmount implicitly holds one
already).

Currently, when an oplock break comes in there's a chance that the
oplock break job won't occur if the allocation of the oplock_q_entry
fails. There are also some rather nasty races in the allocation and
handling these structs.

Rather than allocating oplock queue entries when an oplock break comes
in, add a few extra fields to the cifsFileInfo struct. Get rid of the
dedicated cifs_oplock_thread as well and queue the oplock break job to
the slow_work thread pool.

This approach also has the advantage that the oplock break jobs can
potentially run in parallel rather than be serialized like they are
today.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-09-24 18:33:18 +00:00
Steve French ca43e3beee [CIFS] Fix checkpatch warnings
Also update version number to 1.61

Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-09-01 17:20:50 +00:00
Suresh Jayaraman bdb97adcdf PATCH] cifs: fix broken mounts when a SSH tunnel is used (try #4)
One more try..

It seems there is a regression that got introduced while Jeff fixed
all the mount/umount races. While attempting to find whether a tcp
session is already existing, we were not checking whether the "port"
used are the same. When a second mount is attempted with a different
"port=" option, it is being ignored. Because of this the cifs mounts
that uses a SSH tunnel appears to be broken.

Steps to reproduce:

1. create 2 shares
# SSH Tunnel a SMB session
2. ssh -f -L 6111:127.0.0.1:445 root@localhost "sleep 86400"
3. ssh -f -L 6222:127.0.0.1:445 root@localhost "sleep 86400"
4. tcpdump -i lo 6111 &
5. mkdir -p /mnt/mnt1
6. mkdir -p /mnt/mnt2
7. mount.cifs //localhost/a /mnt/mnt1 -o username=guest,ip=127.0.0.1,port=6111
#(shows tcpdump activity on port 6111)
8. mount.cifs //localhost/b /mnt/mnt2 -o username=guest,ip=127.0.0.1,port=6222
#(shows tcpdump activity only on port 6111 and not on 6222

Fix by adding a check to compare the port _only_ if the user tries to
override the tcp port with "port=" option, before deciding that an
existing tcp session is found. Also, clean up a bit by replacing
if-else if by a switch statment while at it as suggested by Jeff.

Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-09-01 17:08:48 +00:00
Jeff Layton 9b9d6b2434 cifs: reinstate original behavior when uid=/gid= options are specified
This patch fixes the regression reported here:

http://bugzilla.kernel.org/show_bug.cgi?id=13861

commit 4ae1507f6d changed the default
behavior when the uid= or gid= option was specified for a mount. The
existing behavior was to always clobber the ownership information
provided by the server when these options were specified. The above
commit changed this behavior so that these options simply provided
defaults when the server did not provide this information (unless
"forceuid" or "forcegid" were specified)

This patch reverts this change so that the default behavior is restored.
It also adds "noforceuid" and "noforcegid" options to make it so that
ownership information from the server is preserved, even when the mount
has uid= or gid= options specified.

It also adds a couple of printk notices that pop up when forceuid or
forcegid options are specified without a uid= or gid= option.

Reported-by: Tom Chiverton <bugzilla.kernel.org@falkensweb.com>
Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-08-02 03:47:25 +00:00
Jeff Layton 7b91e2661a cifs: fix error handling in mount-time DFS referral chasing code
If the referral is malformed or the hostname can't be resolved, then
the current code generates an oops. Fix it to handle these errors
gracefully.

Reported-by: Sandro Mathys <sm@sandro-mathys.ch>
Acked-by: Igor Mammedov <niallain@gmail.com>
CC: Stable <stable@kernel.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-07-28 00:51:59 +00:00
Jeff Layton 03aa3a49ad cifs: fix sb->s_maxbytes so that it casts properly to a signed value
This off-by-one bug causes sendfile() to not work properly. When a task
calls sendfile() on a file on a CIFS filesystem, the syscall returns -1
and sets errno to EOVERFLOW.

do_sendfile uses s_maxbytes to verify the returned offset of the file.
The problem there is that this value is cast to a signed value (loff_t).
When this is done on the s_maxbytes value that cifs uses, it becomes
negative and the comparisons against it fail.

Even though s_maxbytes is an unsigned value, it seems that it's not OK
to set it in such a way that it'll end up negative when it's cast to a
signed value. These casts happen in other codepaths besides sendfile
too, but the VFS is a little hard to follow in this area and I can't
be sure if there are other bugs that this will fix.

It's not clear to me why s_maxbytes isn't just declared as loff_t in the
first place, but either way we still need to fix these values to make
sendfile work properly. This is also an opportunity to replace the magic
bit-shift values here with the standard #defines for this.

This fixes the reproducer program I have that does a sendfile and
will probably also fix the situation where apache is serving from a
CIFS share.

Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-07-22 21:08:00 +00:00
Jeff Layton 90a98b2f3f cifs: free nativeFileSystem field before allocating a new one
...otherwise, we'll leak this memory if we have to reconnect (e.g. after
network failure).

Signed-off-by: Jeff Layton <jlayton@redhat.com>
CC: Stable <stable@kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-07-20 18:24:37 +00:00
Steve French 71a394faaa [CIFS] remove unknown mount option warning message
Jeff's previous patch which removed the unneeded rw/ro
parsing can cause a minor warning in dmesg (about the
unknown rw or ro mount option) at mount time. This
patch makes cifs ignore them in kernel to remove the warning
(they are already handled in the mount helper and VFS).

Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-06-26 04:07:18 +00:00
Simo Leone 6debdbc0ba [CIFS] Copy struct *after* setting the port, instead of before.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Simo Leone <simo@archlinux.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-06-25 02:44:43 +00:00
Jeff Layton 6459340cfc cifs: remove rw/ro options
cifs: remove rw/ro options

These options are handled at the VFS layer. They only ever set the
option in the smb_vol struct. Nothing was ever done with them afterward
anyway.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-06-25 02:33:01 +00:00
Jeff Layton 681bf72e48 cifs: have cifs parse scope_id out of IPv6 addresses and use it
This patch has CIFS look for a '%' in an IPv6 address. If one is
present then it will try to treat that value as a numeric interface
index suitable for stuffing into the sin6_scope_id field.

This should allow people to mount servers on IPv6 link-local addresses.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: David Holder <david@erion.co.uk>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-06-25 01:14:36 +00:00
Jeff Layton 1e68b2b275 cifs: add new routine for converting AF_INET and AF_INET6 addrs
...to consolidate some logic used in more than one place.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-06-13 08:17:30 +00:00
Jeff Layton 61b6bc525a cifs: remove never-used in6_addr option
This option was never used to my knowledge. Remove it before someone
does...

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-06-10 18:34:35 +00:00
Jeff Layton 58f7f68f22 cifs: add addr= mount option alias for ip=
When you look in /proc/mounts, the address of the server gets displayed
as "addr=". That's really a better option to use anyway since it's more
generic. What if we eventually want to support non-IP transports? It
also makes CIFS option consistent with the NFS option of the same name.

Begin the migration to that option name by adding an alias for ip=
called addr=.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-06-10 15:39:14 +00:00
Jeff Layton 4ae1507f6d cifs: make overriding of ownership conditional on new mount options
We have a bit of a problem with the uid= option. The basic issue is that
it means too many things and has too many side-effects.

It's possible to allow an unprivileged user to mount a filesystem if the
user owns the mountpoint, /bin/mount is setuid root, and the mount is
set up in /etc/fstab with the "user" option.

When doing this though, /bin/mount automatically adds the "uid=" and
"gid=" options to the share. This is fortunate since the correct uid=
option is needed in order to tell the upcall what user's credcache to
use when generating the SPNEGO blob.

On a mount without unix extensions this is fine -- you generally will
want the files to be owned by the "owner" of the mount. The problem
comes in on a mount with unix extensions. With those enabled, the
uid/gid options cause the ownership of files to be overriden even though
the server is sending along the ownership info.

This means that it's not possible to have a mount by an unprivileged
user that shows the server's file ownership info. The result is also
inode permissions that have no reflection at all on the server. You
simply cannot separate ownership from the mode in this fashion.

This behavior also makes MultiuserMount option less usable. Once you
pass in the uid= option for a mount, then you can't use unix ownership
info and allow someone to share the mount.

While I'm not thrilled with it, the only solution I can see is to stop
making uid=/gid= force the overriding of ownership on mounts, and to add
new mount options that turn this behavior on.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-06-06 21:03:27 +00:00
Jeff Layton 50b64e3b77 cifs: fix IPv6 address length check
For IPv6 the userspace mount helper sends an address in the "ip="
option.  This check fails if the length is > 35 characters. I have no
idea where the magic 35 character limit came from, but it's clearly not
enough for IPv6. Fix it by making it use the INET6_ADDRSTRLEN #define.

While we're at it, use the same #define for the address length in SPNEGO
upcalls.

Reported-by: Charles R. Anderson <cra@wpi.edu>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-06-02 15:45:40 +00:00
Jeff Layton a0c9217f64 cifs: make serverino the default when mounting
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-05-28 15:04:17 +00:00
Jeff Layton f55ed1a83d cifs: tighten up default file_mode/dir_mode
The current default file mode is 02767 and dir mode is 0777. This is
extremely "loose". Given that CIFS is a single-user protocol, these
permissions allow anyone to use the mount -- in effect, giving anyone on
the machine access to the credentials used to mount the share.

Change this by making the default permissions restrict write access to
the default owner of the mount. Give read and execute permissions to
everyone else. These are the same permissions that VFAT mounts get by
default so there is some precedent here.

Note that this patch also removes the mandatory locking flags from the
default file_mode. After having looked at how these flags are used by
the kernel, I don't think that keeping them as the default offers any
real benefit. That flag combination makes it so that the kernel enforces
mandatory locking.

Since the server is going to do that for us anyway, I don't think we
want the client to enforce this by default on applications that just
want advisory locks. Anyone that does want this behavior can always
enable it by setting the file_mode appropriately.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-05-26 21:10:55 +00:00
Steve French ac68392460 [CIFS] Allow raw ntlmssp code to be enabled with sec=ntlmssp
On mount, "sec=ntlmssp" can now be specified to allow
"rawntlmssp" security to be enabled during
CIFS session establishment/authentication (ntlmssp used to
require specifying krb5 which was counterintuitive).

Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-05-06 04:16:04 +00:00
Steve French 2edd6c5b05 [CIFS] NTLMSSP support moving into new file, old dead code removed
Remove dead NTLMSSP support from connect.c prior to addition of
the new code to replace it.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-05-02 04:55:39 +00:00
Steve French 0e0d2cf327 [CIFS] Remove sparse endian warnings
Removes two sparse CHECK_ENDIAN warnings from Jeffs earlier patch,
and removes the dead readlink code (after noting where in
findfirst we will need to add something like that in the future
to handle the newly discovered unexpected error on FindFirst of NTFS symlinks.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-05-01 05:27:32 +00:00
Steve French e14b2fe1e6 [CIFS] Add remaining ntlmssp flags and standardize field names
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-05-01 04:37:43 +00:00
Steve French 9e39b0ae8a [CIFS] Remove unneeded QuerySymlink call and fix mapping for unmapped status
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-30 21:31:15 +00:00
Steve French d185cda771 [CIFS] rename cifs_strndup to cifs_strndup_from_ucs
In most cases, cifs_strndup is converting from Unicode (UCS2 / UTF-32) to
the configured local code page for the Linux mount (usually UTF8), so
Jeff suggested that to make it more clear that cifs_strndup is doing
a conversion not just memory allocation and copy, rename the function
to including "from_ucs" (ie Unicode)

Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-30 17:45:10 +00:00
Igor Mammedov 5c2503a8e3 Added loop check when mounting DFS tree.
Added loop check when mounting DFS tree. mount will fail with
ELOOP if referral walks exceed MAX_NESTED_LINK count.

Signed-off-by: Igor Mammedov <niallain@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-30 17:24:09 +00:00
Steve French 20418acd68 [CIFS] Remove older session setup implementation
Two years ago, when the session setup code in cifs was rewritten and moved
to fs/cifs/sess.c, we were asked to keep the old code for a release or so
(which could be reenabled at runtime) since it was such a large change and
because the asn (SPNEGO) and NTLMSSP code was not rewritten and needed to
be. This was useful to avoid regressions, but is long overdue to be removed.
Now that the Kerberos (asn/spnego) code is working in fs/cifs/sess.c,
and the NTLMSSP code moved (NTLMSSP blob setup be rewritten with the
next patch in this series) quite a bit of dead code from fs/cifs/connect.c
now can be removed.

This old code should have been removed last year, but the earlier krb5
patches did not move/remove the NTLMSSP code which we had asked to
be done first.  Since no one else volunteered, I am doing it now.

It is extremely important that we continue to examine the documentation
for this area, to make sure our code continues to be uptodate with
changes since Windows 2003.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-30 16:13:32 +00:00
Jeff Layton cc20c031bb cifs: convert CIFSTCon to use new unicode helper functions
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-30 15:45:00 +00:00
Jeff Layton 22c9d52bc0 cifs: remove unneeded bcc_ptr update in CIFSTCon
This pointer isn't used again after this point. It's also not updated in
the ascii case, so there's no need to update it here.

Pointed-out-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:50 +00:00
Jeff Layton 313fecfa69 cifs: add cFYI messages with some of the saved strings from ssetup/tcon
...to make it easier to find problems in this area in the future.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:50 +00:00
Jeff Layton f083def68f cifs: fix buffer size for tcon->nativeFileSystem field
The buffer for this was resized recently to fix a bug. It's still
possible however that a malicious server could overflow this field
by sending characters in it that are >2 bytes in the local charset.
Double the size of the buffer to account for this possibility.

Also get rid of some really strange and seemingly pointless NULL
termination. It's NULL terminating the string in the source buffer,
but by the time that happens, we've already copied the string.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:50 +00:00
Steve French 2d6d589d80 [CIFS] remove some build warnings
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:49 +00:00
Steve French d036f50fc2 [CIFS] Fix build break from recent DFS patch when DFS support not enabled
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:48 +00:00
Igor Mammedov 1bfe73c258 Remote DFS root support.
Allows to mount share on a server that returns -EREMOTE
 at the tree connect stage or at the check on a full path
 accessibility.

Signed-off-by: Igor Mammedov <niallain@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:48 +00:00
Wei Yongjun 74496d365a cifs: remove some pointless conditionals before kfree()
Remove some pointless conditionals before kfree().

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:48 +00:00
Steve French b363b3304b [CIFS] Fix memory overwrite when saving nativeFileSystem field during mount
CIFS can allocate a few bytes to little for the nativeFileSystem field
during tree connect response processing during mount.  This can result
in a "Redzone overwritten" message to be logged.

Signed-off-by: Sridhar Vinay <vinaysridhar@in.ibm.com>
Acked-by: Shirish Pargaonkar <shirishp@us.ibm.com>
CC: Stable <stable@kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-03-18 05:57:22 +00:00
Steve French 4717bed680 [CIFS] fix build error
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-03-12 01:36:20 +00:00
Steve French be652445fd [CIFS] Add new nostrictsync cifs mount option to avoid slow SMB flush
If this mount option is set, when an application does an
fsync call then the cifs client does not send an SMB Flush
to the server (to force the server to write all dirty data
for this file immediately to disk), although cifs still sends
all dirty (cached) file data to the server and waits for the
server to respond to the write write.  Since SMB Flush can be
very slow, and some servers may be reliable enough (to risk
delaying slightly flushing the data to disk on the server),
turning on this option may be useful to improve performance for
applications that fsync too much, at a small risk of server
crash.  If this mount option is not set, by default cifs will
send an SMB flush request (and wait for a response) on every
fsync call.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-03-12 01:36:20 +00:00
Igor Mammedov e4cce94c9c [CIFS] Prevent OOPs when mounting with remote prefixpath.
Fixes OOPs with message 'kernel BUG at fs/cifs/cifs_dfs_ref.c:274!'.
Checks if the prefixpath in an accesible while we are still in cifs_mount
and fails with reporting a error if we can't access the prefixpath

Should fix Samba bugs 6086 and 5861 and kernel bug 12192

Signed-off-by: Igor Mammedov <niallain@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-02-21 03:36:21 +00:00
Steve French 0e2bedaa39 [CIFS] ipv6_addr_equal for address comparison
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-01-30 21:24:41 +00:00
Jeff Layton a9ac49d303 cifs: make sure we allocate enough storage for socket address
The sockaddr declared on the stack in cifs_get_tcp_session is too small
for IPv6 addresses. Change it from "struct sockaddr" to "struct
sockaddr_storage" to prevent stack corruption when IPv6 is used.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-01-29 03:32:13 +00:00
Steve French da505c386c [CIFS] Make socket retry timeouts consistent between blocking and nonblocking cases
We have used approximately 15 second timeouts on nonblocking sends in the past, and
also 15 second SMB timeout (waiting for server responses, for most request types).
Now that we can do blocking tcp sends,
make blocking send timeout approximately the same (15 seconds).

Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-01-29 03:32:13 +00:00
Jeff Layton 0496e02d87 cifs: turn smb_send into a wrapper around smb_sendv
cifs: turn smb_send into a wrapper around smb_sendv

Rename smb_send2 to smb_sendv to make it consistent with kernel naming
conventions for functions that take a vector.

There's no need to have 2 functions to handle sending SMB calls. Turn
smb_send into a wrapper around smb_sendv. This also allows us to
properly mark the socket as needing to be reconnected when there's a
partial send from smb_send.

Also, in practice we always use the address and noblocksnd flag
that's attached to the TCP_Server_Info. There's no need to pass
them in as separate args to smb_sendv.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-01-29 03:32:12 +00:00
Linus Torvalds 0191b625ca Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits)
  net: Allow dependancies of FDDI & Tokenring to be modular.
  igb: Fix build warning when DCA is disabled.
  net: Fix warning fallout from recent NAPI interface changes.
  gro: Fix potential use after free
  sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
  sfc: When disabling the NIC, close the device rather than unregistering it
  sfc: SFT9001: Add cable diagnostics
  sfc: Add support for multiple PHY self-tests
  sfc: Merge top-level functions for self-tests
  sfc: Clean up PHY mode management in loopback self-test
  sfc: Fix unreliable link detection in some loopback modes
  sfc: Generate unique names for per-NIC workqueues
  802.3ad: use standard ethhdr instead of ad_header
  802.3ad: generalize out mac address initializer
  802.3ad: initialize ports LACPDU from const initializer
  802.3ad: remove typedef around ad_system
  802.3ad: turn ports is_individual into a bool
  802.3ad: turn ports is_enabled into a bool
  802.3ad: make ntt bool
  ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
  ...

Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due
to the conversion to %pI (in this networking merge) and the addition of
doing IPv6 addresses (from the earlier merge of CIFS).
2008-12-28 12:49:40 -08:00
Linus Torvalds 54a696bd07 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (31 commits)
  [CIFS] Remove redundant test
  [CIFS] make sure that DFS pathnames are properly formed
  Remove an already-checked error condition in SendReceiveBlockingLock
  Streamline SendReceiveBlockingLock: Use "goto out:" in an error condition
  Streamline SendReceiveBlockingLock: Use "goto out:" in an error condition
  [CIFS] Streamline SendReceive[2] by using "goto out:" in an error condition
  Slightly streamline SendReceive[2]
  Check the return value of cifs_sign_smb[2]
  [CIFS] Cleanup: Move the check for too large R/W requests
  [CIFS] Slightly simplify wait_for_free_request(), remove an unnecessary "else" branch
  Simplify allocate_mid() slightly: Remove some unnecessary "else" branches
  [CIFS] In SendReceive, move consistency check out of the mutexed region
  cifs: store password in tcon
  cifs: have calc_lanman_hash take more granular args
  cifs: zero out session password before freeing it
  cifs: fix wait_for_response to time out sleeping processes correctly
  [CIFS] Can not mount with prefixpath if root directory of share is inaccessible
  [CIFS] various minor cleanups pointed out by checkpatch script
  [CIFS] fix typo
  [CIFS] remove sparse warning
  ...

Fix trivial conflict in fs/cifs/cifs_fs_sb.h due to comment changes for
the CIFS_MOUNT_xyz bit definitions between cifs updates and security
updates.
2008-12-28 12:37:14 -08:00
Jeff Layton 00e485b019 cifs: store password in tcon
cifs: store password in tcon

Each tcon has its own password for share-level security. Store it in
the tcon and wipe it clean and free it when freeing the tcon. When
doing the tree connect with share-level security, use the tcon password
instead of the session password.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-12-26 02:29:11 +00:00
Jeff Layton 4e53a3fb98 cifs: have calc_lanman_hash take more granular args
cifs: have calc_lanman_hash take more granular args

We need to use this routine to encrypt passwords associated with the
tcon too. Don't assume that the password will be attached to the
smb_session.

Also, make some of the values in the lower encryption functions
const since they aren't changed.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-12-26 02:29:11 +00:00
Steve French 61e7480158 [CIFS] various minor cleanups pointed out by checkpatch script
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-12-26 02:29:10 +00:00
Steve French 13a6e42af8 [CIFS] add mount option to send mandatory rather than advisory locks
Some applications/subsystems require mandatory byte range locks
(as is used for Windows/DOS/OS2 etc). Sending advisory (posix style)
byte range lock requests (instead of mandatory byte range locks) can
lead to problems for these applications (which expect that other
clients be prevented from writing to portions of the file which
they have locked and are updating).  This mount option allows
mounting cifs with the new mount option "forcemand" (or
"forcemandatorylock") in order to have the cifs client use mandatory
byte range locks (ie SMB/CIFS/Windows/NTFS style locks) rather than
posix byte range lock requests, even if the server would support
posix byte range lock requests.  This has no effect if the server
does not support the CIFS Unix Extensions (since posix style locks
require support for the CIFS Unix Extensions), but for mounts
to Samba servers this can be helpful for Wine and applications
that require mandatory byte range locks.

Acked-by: Jeff Layton <jlayton@redhat.com>
CC: Alexander Bokovoy <ab@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-12-26 02:29:10 +00:00
Jeff Layton d5c5605c27 cifs: make ipv6_connect take a TCP_Server_Info arg
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-12-26 02:29:10 +00:00
Jeff Layton bcf4b1063d cifs: make ipv4_connect take a TCP_Server_Info arg
In order to unify the smb_send routines, we need to reorganize the
routines that connect the sockets. Have ipv4_connect take a
TCP_Server_Info pointer and get the necessary fields from that.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-12-26 02:29:10 +00:00
Jeff Layton 7586b76585 cifs: don't declare smb_vol info on the stack
struct smb_vol is fairly large, it's probably best to kzalloc it...

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-12-26 02:29:10 +00:00
Jeff Layton 63c038c297 cifs: move allocation of new TCP_Server_Info into separate function
Clean up cifs_mount a bit by moving the code that creates new TCP
sessions into a separate function. Have that function search for an
existing socket and then create a new one if one isn't found.

Also reorganize the initializion of TCP_Server_Info a bit to prepare
for cleanup of the socket connection code.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-12-26 02:29:10 +00:00
Jeff Layton 8ecaf67a8e cifs: account for IPv6 in ses->serverName and clean up netbios name handling
The current code for setting the session serverName is IPv4-specific.
Allow it to be an IPv6 address as well. Use NIP* macros to set the
format.

This also entails increasing the length of the serverName field, so
declare a new macro for RFC1001 name length and use it in the
appropriate places.

Finally, drop the unicode_server_Name field from TCP_Server_Info since
it's not used. We can add it back later if needed, but for now it just
wastes memory.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-12-26 02:29:09 +00:00
Jeff Layton 72ca545b2d cifs: convert tcpSem to a mutex
Mutexes are preferred for single-holder semaphores...

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-12-26 02:29:09 +00:00
Jeff Layton 0468a2cf91 cifs: take module reference when starting cifsd
cifsd can outlive the last cifs mount. We need to hold a module
reference until it exits to prevent someone from unplugging
the module until we're ready.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-12-26 02:29:09 +00:00
David S. Miller 198d6ba4d7 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/isdn/i4l/isdn_net.c
	fs/cifs/connect.c
2008-11-18 23:38:23 -08:00
James Morris f3a5c54701 Merge branch 'master' into next
Conflicts:
	fs/cifs/misc.c

Merge to resolve above, per the patch below.

Signed-off-by: James Morris <jmorris@namei.org>

diff --cc fs/cifs/misc.c
index ec36410,addd1dc..0000000
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@@ -347,13 -338,13 +338,13 @@@ header_assemble(struct smb_hdr *buffer
  		/*  BB Add support for establishing new tCon and SMB Session  */
  		/*      with userid/password pairs found on the smb session   */
  		/*	for other target tcp/ip addresses 		BB    */
 -				if (current->fsuid != treeCon->ses->linux_uid) {
 +				if (current_fsuid() != treeCon->ses->linux_uid) {
  					cFYI(1, ("Multiuser mode and UID "
  						 "did not match tcon uid"));
- 					read_lock(&GlobalSMBSeslock);
- 					list_for_each(temp_item, &GlobalSMBSessionList) {
- 						ses = list_entry(temp_item, struct cifsSesInfo, cifsSessionList);
+ 					read_lock(&cifs_tcp_ses_lock);
+ 					list_for_each(temp_item, &treeCon->ses->server->smb_ses_list) {
+ 						ses = list_entry(temp_item, struct cifsSesInfo, smb_ses_list);
 -						if (ses->linux_uid == current->fsuid) {
 +						if (ses->linux_uid == current_fsuid()) {
  							if (ses->server == treeCon->ses->server) {
  								cFYI(1, ("found matching uid substitute right smb_uid"));
  								buffer->Uid = ses->Suid;
2008-11-18 18:52:37 +11:00
Steve French ab3f992983 [CIFS] Fix check for tcon seal setting and fix oops on failed mount from earlier patch
set tcon->ses earlier

If the inital tree connect fails, we'll end up calling cifs_put_smb_ses
with a NULL pointer. Fix it by setting the tcon->ses earlier.

Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-17 16:03:00 +00:00
Jeff Layton f1987b44f6 cifs: reinstate sharing of tree connections
Use a similar approach to the SMB session sharing. Add a list of tcons
attached to each SMB session. Move the refcount to non-atomic. Protect
all of the above with the cifs_tcp_ses_lock. Add functions to
properly find and put references to the tcons.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-17 03:14:12 +00:00
Steve French d82c2df54e [CIFS] minor cleanup to cifs_mount
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-15 00:07:26 +00:00
Jeff Layton 14fbf50d69 cifs: reinstate sharing of SMB sessions sans races
We do this by abandoning the global list of SMB sessions and instead
moving to a per-server list. This entails adding a new list head to the
TCP_Server_Info struct. The refcounting for the cifsSesInfo is moved to
a non-atomic variable. We have to protect it by a lock anyway, so there's
no benefit to making it an atomic. The list and refcount are protected
by the global cifs_tcp_ses_lock.

The patch also adds a new routines to find and put SMB sessions and
that properly take and put references under the lock.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-14 23:56:55 +00:00
Jeff Layton e7ddee9037 cifs: disable sharing session and tcon and add new TCP sharing code
The code that allows these structs to be shared is extremely racy.
Disable the sharing of SMB and tcon structs for now until we can
come up with a way to do this that's race free.

We want to continue to share TCP sessions, however since they are
required for multiuser mounts. For that, implement a new (hopefully
race-free) scheme. Add a new global list of TCP sessions, and take
care to get a reference to it whenever we're dealing with one.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-14 23:42:32 +00:00
Steve French 3ec332ef7a [CIFS] clean up server protocol handling
We're currently declaring both a sockaddr_in and sockaddr6_in on the
stack, but we really only need storage for one of them. Declare a
sockaddr struct and cast it to the proper type. Also, eliminate the
protocolType field in the TCP_Server_Info struct. It's redundant since
we have a sa_family field in the sockaddr anyway.

We may need to revisit this if SCTP is ever implemented, but for now
this will simplify the code.

CIFS over IPv6 also has a number of problems currently. This fixes all
of them that I found. Eventually, it would be nice to move more of the
code to be protocol independent, but this is a start.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-14 03:35:10 +00:00
David Howells a001e5b558 CRED: Wrap task credential accesses in the CIFS filesystem
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.

Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().

Change some task->e?[ug]id to task_e?[ug]id().  In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Steve French <sfrench@samba.org>
Cc: linux-cifs-client@lists.samba.org
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:38:47 +11:00
Steve French 3b79521093 [CIFS] Fix cifs reconnection flags
In preparation for Jeff's big umount/mount fixes to remove the possibility of
various races in cifs mount and linked list handling of sessions, sockets and
tree connections, this patch cleans up some repetitive code in cifs_mount,
and addresses a problem with ses->status and tcon->tidStatus in which we
were overloading the "need_reconnect" state with other status in that
field.  So the "need_reconnect" flag has been broken out from those
two state fields (need reconnect was not mutually exclusive from some of the
other possible tid and ses states).  In addition, a few exit cases in
cifs_mount were cleaned up, and a problem with a tcon flag (for lease support)
was not being set consistently for the 2nd mount of the same share

CC: Jeff Layton <jlayton@redhat.com>
CC: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-13 19:45:32 +00:00
David S. Miller 9eeda9abd1 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/wireless/ath5k/base.c
	net/8021q/vlan_core.c
2008-11-06 22:43:03 -08:00
Steve French c527c8a7ff [CIFS] Can't rely on iov length and base when kernel_recvmsg returns error
When retrying kernel_recvmsg, reset iov_base and iov_len.

Note comment from Sridhar: "In the normal path, iov.iov_len is clearly set to 4. But i think you are
running into a case where kernel_recvmsg() is called via 'goto incomplete_rcv'
It happens if the previous call fails with EAGAIN.
If you want to call recvmsg() after EAGAIN failure, you need to reset iov."

Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-03 20:46:21 +00:00
Harvey Harrison be85940548 fs: replace NIPQUAD()
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u
can be replaced with %pI4

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-31 00:56:28 -07:00
Steve French edf1ae4038 [CIFS] Reduce number of socket retries in large write path
CIFS in some heavy stress conditions cifs could get EAGAIN
repeatedly in smb_send2 which led to repeated retries and eventually
failure of large writes which could lead to data corruption.

There are three changes that were suggested by various network
developers:

1) convert cifs from non-blocking to blocking tcp sendmsg
(we left in the retry on failure)
2) change cifs to not set sendbuf and rcvbuf size for the socket
(let tcp autotune the buffer sizes since that works much better
in the TCP stack now)
3) if we have a partial frame sent in smb_send2, mark the tcp
session as invalid (close the socket and reconnect) so we do
not corrupt the remaining part of the SMB with the beginning
of the next SMB.

This does not appear to hurt performance measurably and has
been run in various scenarios, but it definately removes
a corruption that we were seeing in some high stress
test cases.

Acked-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-29 00:47:57 +00:00
Jeff Layton b1c8d2b421 cifs: handle the TCP_Server_Info->tsk field more carefully
cifs: handle the TCP_Server_Info->tsk field more carefully

We currently handle the TCP_Server_Info->tsk field without any locking,
but with some half-measures to try and prevent races. These aren't
really sufficient though. When taking down cifsd, use xchg() to swap
the contents of the tsk field with NULL so we don't end up trying
to send it more than one signal. Also, don't allow cifsd to exit until
the signal is received if we expect one.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-23 05:06:20 +00:00
Steve French 84210e9120 [CIFS] improve setlease handling
fcntl(F_SETLEASE) currently is not exported by cifs (nor by local file
systems) so cifs grants leases based on how other local processes have
opened the file not by whether the file is cacheable (oplocked).  This
adds the check to make sure that the file is cacheable on the client
before checking whether we can grant the lease locally
(generic_setlease).  It also adds a mount option for cifs (locallease)
if the user wants to override this and try to grant leases even
if the server did not grant oplock.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-23 04:42:37 +00:00
Jeff Layton 469ee614aa [CIFS] eliminate usage of kthread_stop for cifsd
When cifs_demultiplex_thread was converted to a kthread based kernel
thread, great pains were taken to make it so that kthread_stop would be
used to bring it down. This just added unnecessary complexity since we
needed to use a signal anyway to break out of kernel_recvmsg.

Also, cifs_demultiplex_thread does a bit of cleanup as it's exiting, and
we need to be certain that this gets done. It's possible for a kthread
to exit before its main function is ever run if kthread_stop is called
soon after its creation. While I'm not sure that this is a real problem
with cifsd now, it could be at some point in the future if cifs_mount is
ever changed to bring down the thread quickly.

The upshot here is that using kthread_stop to bring down the thread just
adds extra complexity with no real benefit. This patch changes the code
to use the original method to bring down the thread, but still leaves it
so that the thread is actually started with kthread_run.

This seems to fix the deadlock caused by the reproducer in this bug
report:

https://bugzilla.samba.org/show_bug.cgi?id=5720

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-16 18:46:39 +00:00
Steve French 2c1b861539 [CIFS] Add nodfs mount option
Older samba server (eg. 3.0.24 from Debian etch) don't work correctly,
if DFS paths are used. Such server claim that they support DFS, but fail
to process some requests with DFS paths. Starting with Linux 2.6.26,
the cifs clients starts sending DFS paths in such situations, rendering
it unuseable with older samba servers.

The nodfs mount options forces a share to be used with non DFS paths,
even if the server claims, that it supports it.

Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Acked-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Igor Mammedov <niallain@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-16 18:35:21 +00:00
Jeff Layton cb7691b648 cifs: add local server pointer to cifs_setup_session
cifs_setup_session references pSesInfo->server several times. That
pointer shouldn't change during the life of the function so grab it
once and store it in a local var. This makes the code look a little
cleaner too.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-08-19 17:11:35 +00:00
Steve French ad8b15f0ff [CIFS] list entry can not return null
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-08-08 21:10:16 +00:00
Steve French 26b994fad6 [CIFS] Code cleanup in old sessionsetup code
Remove some long lines

Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-08-06 05:11:33 +00:00
Jeff Layton 93d0ec8518 remove locking around tcpSesAllocCount atomic variable
The global tcpSesAllocCount variable is an atomic already and doesn't
really need the extra locking around it. Remove the locking and just use
the atomic_inc_return and atomic_dec_return functions to make sure we
access it correctly.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-08-04 02:02:15 +00:00
Harvey Harrison 5ca33c6ac3 cifs: assorted endian annotations
fs/cifs/cifssmb.c:3917:13: warning: incorrect type in assignment (different base types)
fs/cifs/cifssmb.c:3917:13:    expected bool [unsigned] [usertype] is_unicode
fs/cifs/cifssmb.c:3917:13:    got restricted __le16

The comment explains why __force is used here.
fs/cifs/connect.c:458:16: warning: cast to restricted __be32
fs/cifs/connect.c:458:16: warning: cast to restricted __be32
fs/cifs/connect.c:458:16: warning: cast to restricted __be32
fs/cifs/connect.c:458:16: warning: cast to restricted __be32
fs/cifs/connect.c:458:16: warning: cast to restricted __be32
fs/cifs/connect.c:458:16: warning: cast to restricted __be32

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-07-24 01:14:41 +00:00
Jeff Layton 09e50d55a9 lockdep: annotate cifs in-kernel sockets
Put CIFS sockets in their own class to avoid some lockdep warnings. CIFS
sockets are not exposed to user-space, and so are not subject to the
same deadlock scenarios.

A similar change was made a couple of years ago for RPC sockets in commit
ed07536ed6.

This patch should prevent lockdep false-positives like this one:

=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.18-98.el5.jtltest.38.bz456320.1debug #1
-------------------------------------------------------
test5/2483 is trying to acquire lock:
 (sk_lock-AF_INET){--..}, at: [<ffffffff800270d2>] tcp_sendmsg+0x1c/0xb2f

but task is already holding lock:
 (&inode->i_alloc_sem){--..}, at: [<ffffffff8002e454>] notify_change+0xf5/0x2e0

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #3 (&inode->i_alloc_sem){--..}:
       [<ffffffff800a817c>] __lock_acquire+0x9a9/0xadf
       [<ffffffff800a8a72>] lock_acquire+0x55/0x70
       [<ffffffff8002e454>] notify_change+0xf5/0x2e0
       [<ffffffff800a4e36>] down_write+0x3c/0x68
       [<ffffffff8002e454>] notify_change+0xf5/0x2e0
       [<ffffffff800e358d>] do_truncate+0x50/0x6b
       [<ffffffff8005197c>] get_write_access+0x40/0x46
       [<ffffffff80012cf1>] may_open+0x1d3/0x22e
       [<ffffffff8001bc81>] open_namei+0x2c6/0x6dd
       [<ffffffff800289c6>] do_filp_open+0x1c/0x38
       [<ffffffff800683ef>] _spin_unlock+0x17/0x20
       [<ffffffff800167a7>] get_unused_fd+0xf9/0x107
       [<ffffffff8001a704>] do_sys_open+0x44/0xbe
       [<ffffffff80060116>] system_call+0x7e/0x83
       [<ffffffffffffffff>] 0xffffffffffffffff

-> #2 (&sysfs_inode_imutex_key){--..}:
       [<ffffffff800a817c>] __lock_acquire+0x9a9/0xadf
       [<ffffffff8010f6df>] create_dir+0x26/0x1d7
       [<ffffffff800a8a72>] lock_acquire+0x55/0x70
       [<ffffffff8010f6df>] create_dir+0x26/0x1d7
       [<ffffffff800671c0>] mutex_lock_nested+0x104/0x29c
       [<ffffffff800a819d>] __lock_acquire+0x9ca/0xadf
       [<ffffffff8010f6df>] create_dir+0x26/0x1d7
       [<ffffffff8010fc67>] sysfs_create_dir+0x58/0x76
       [<ffffffff8015144c>] kobject_add+0xdb/0x198
       [<ffffffff801be765>] class_device_add+0xb2/0x465
       [<ffffffff8005a6ff>] kobject_get+0x12/0x17
       [<ffffffff80225265>] register_netdevice+0x270/0x33e
       [<ffffffff8022538c>] register_netdev+0x59/0x67
       [<ffffffff80464d40>] net_olddevs_init+0xb/0xac
       [<ffffffff80448a79>] init+0x1f9/0x2fc
       [<ffffffff80068885>] _spin_unlock_irq+0x24/0x27
       [<ffffffff80067f86>] trace_hardirqs_on_thunk+0x35/0x37
       [<ffffffff80061079>] child_rip+0xa/0x11
       [<ffffffff80068885>] _spin_unlock_irq+0x24/0x27
       [<ffffffff800606a8>] restore_args+0x0/0x30
       [<ffffffff80179a59>] acpi_ds_init_one_object+0x0/0x80
       [<ffffffff80448880>] init+0x0/0x2fc
       [<ffffffff8006106f>] child_rip+0x0/0x11
       [<ffffffffffffffff>] 0xffffffffffffffff

-> #1 (rtnl_mutex){--..}:
       [<ffffffff800a817c>] __lock_acquire+0x9a9/0xadf
       [<ffffffff8025acf8>] ip_mc_leave_group+0x23/0xb7
       [<ffffffff800a8a72>] lock_acquire+0x55/0x70
       [<ffffffff8025acf8>] ip_mc_leave_group+0x23/0xb7
       [<ffffffff800671c0>] mutex_lock_nested+0x104/0x29c
       [<ffffffff8025acf8>] ip_mc_leave_group+0x23/0xb7
       [<ffffffff802451b0>] do_ip_setsockopt+0x6d1/0x9bf
       [<ffffffff800a575e>] lock_release_holdtime+0x27/0x48
       [<ffffffff800a575e>] lock_release_holdtime+0x27/0x48
       [<ffffffff8006a85e>] do_page_fault+0x503/0x835
       [<ffffffff8012cbf6>] socket_has_perm+0x5b/0x68
       [<ffffffff80245556>] ip_setsockopt+0x22/0x78
       [<ffffffff8021c973>] sys_setsockopt+0x91/0xb7
       [<ffffffff800602a6>] tracesys+0xd5/0xdf
       [<ffffffffffffffff>] 0xffffffffffffffff

-> #0 (sk_lock-AF_INET){--..}:
       [<ffffffff800a5037>] print_stack_trace+0x59/0x68
       [<ffffffff800a8092>] __lock_acquire+0x8bf/0xadf
       [<ffffffff800a8a72>] lock_acquire+0x55/0x70
       [<ffffffff800270d2>] tcp_sendmsg+0x1c/0xb2f
       [<ffffffff80035466>] lock_sock+0xd4/0xe4
       [<ffffffff80096e91>] _local_bh_enable+0xcb/0xe0
       [<ffffffff800606a8>] restore_args+0x0/0x30
       [<ffffffff800270d2>] tcp_sendmsg+0x1c/0xb2f
       [<ffffffff80057540>] sock_sendmsg+0xf3/0x110
       [<ffffffff800a2bb6>] autoremove_wake_function+0x0/0x2e
       [<ffffffff800a10e4>] kernel_text_address+0x1a/0x26
       [<ffffffff8006f4e2>] dump_trace+0x211/0x23a
       [<ffffffff800a6d3d>] find_usage_backwards+0x5f/0x88
       [<ffffffff8840221a>] MD5Final+0xaf/0xc2 [cifs]
       [<ffffffff884032ec>] cifs_calculate_signature+0x55/0x69 [cifs]
       [<ffffffff8021d891>] kernel_sendmsg+0x35/0x47
       [<ffffffff883ff38e>] smb_send+0xa3/0x151 [cifs]
       [<ffffffff883ff5de>] SendReceive+0x1a2/0x448 [cifs]
       [<ffffffff800a812f>] __lock_acquire+0x95c/0xadf
       [<ffffffff883e758a>] CIFSSMBSetEOF+0x20d/0x25b [cifs]
       [<ffffffff883fa430>] cifs_set_file_size+0x110/0x3b7 [cifs]
       [<ffffffff883faa89>] cifs_setattr+0x3b2/0x6f6 [cifs]
       [<ffffffff8002e454>] notify_change+0xf5/0x2e0
       [<ffffffff8002e4a4>] notify_change+0x145/0x2e0
       [<ffffffff800e358d>] do_truncate+0x50/0x6b
       [<ffffffff8005197c>] get_write_access+0x40/0x46
       [<ffffffff80012cf1>] may_open+0x1d3/0x22e
       [<ffffffff8001bc81>] open_namei+0x2c6/0x6dd
       [<ffffffff800289c6>] do_filp_open+0x1c/0x38
       [<ffffffff800683ef>] _spin_unlock+0x17/0x20
       [<ffffffff800167a7>] get_unused_fd+0xf9/0x107
       [<ffffffff8001a704>] do_sys_open+0x44/0xbe
       [<ffffffff800602a6>] tracesys+0xd5/0xdf
       [<ffffffffffffffff>] 0xffffffffffffffff

other info that might help us debug this:

2 locks held by test5/2483:
 #0:  (&inode->i_mutex){--..}, at: [<ffffffff800e3582>] do_truncate+0x45/0x6b
 #1:  (&inode->i_alloc_sem){--..}, at: [<ffffffff8002e454>] notify_change+0xf5/0x2e0

stack backtrace:

Call Trace:
 [<ffffffff800a6a7b>] print_circular_bug_tail+0x65/0x6e
 [<ffffffff800a5037>] print_stack_trace+0x59/0x68
 [<ffffffff800a8092>] __lock_acquire+0x8bf/0xadf
 [<ffffffff800a8a72>] lock_acquire+0x55/0x70
 [<ffffffff800270d2>] tcp_sendmsg+0x1c/0xb2f
 [<ffffffff80035466>] lock_sock+0xd4/0xe4
 [<ffffffff80096e91>] _local_bh_enable+0xcb/0xe0
 [<ffffffff800606a8>] restore_args+0x0/0x30
 [<ffffffff800270d2>] tcp_sendmsg+0x1c/0xb2f
 [<ffffffff80057540>] sock_sendmsg+0xf3/0x110
 [<ffffffff800a2bb6>] autoremove_wake_function+0x0/0x2e
 [<ffffffff800a10e4>] kernel_text_address+0x1a/0x26
 [<ffffffff8006f4e2>] dump_trace+0x211/0x23a
 [<ffffffff800a6d3d>] find_usage_backwards+0x5f/0x88
 [<ffffffff8840221a>] :cifs:MD5Final+0xaf/0xc2
 [<ffffffff884032ec>] :cifs:cifs_calculate_signature+0x55/0x69
 [<ffffffff8021d891>] kernel_sendmsg+0x35/0x47
 [<ffffffff883ff38e>] :cifs:smb_send+0xa3/0x151
 [<ffffffff883ff5de>] :cifs:SendReceive+0x1a2/0x448
 [<ffffffff800a812f>] __lock_acquire+0x95c/0xadf
 [<ffffffff883e758a>] :cifs:CIFSSMBSetEOF+0x20d/0x25b
 [<ffffffff883fa430>] :cifs:cifs_set_file_size+0x110/0x3b7
 [<ffffffff883faa89>] :cifs:cifs_setattr+0x3b2/0x6f6
 [<ffffffff8002e454>] notify_change+0xf5/0x2e0
 [<ffffffff8002e4a4>] notify_change+0x145/0x2e0
 [<ffffffff800e358d>] do_truncate+0x50/0x6b
 [<ffffffff8005197c>] get_write_access+0x40/0x46
 [<ffffffff80012cf1>] may_open+0x1d3/0x22e
 [<ffffffff8001bc81>] open_namei+0x2c6/0x6dd
 [<ffffffff800289c6>] do_filp_open+0x1c/0x38
 [<ffffffff800683ef>] _spin_unlock+0x17/0x20
 [<ffffffff800167a7>] get_unused_fd+0xf9/0x107
 [<ffffffff8001a704>] do_sys_open+0x44/0xbe
 [<ffffffff800602a6>] tracesys+0xd5/0xdf

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-07-23 18:25:38 +00:00
Steve French dbdbb87636 [CIFS] Fix hang in mount when negprot causes server to kill tcp session
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-06-10 21:21:56 +00:00
Steve French 27adb44c4f [CIFS] warn if both dynperm and cifsacl mount options specified
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-05-23 19:43:29 +00:00
Steve French 95b1cb90b7 [CIFS] enable parsing for transport encryption mount parm
Samba now supports transport encryption on particular exports
(mounted tree ids can be encrypted for servers which support the
unix extensions).  This adds parsing support to cifs mount
option parsing for this.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-05-15 16:44:38 +00:00
Steve French c2cf07d591 [CIFS] Finishup DFS code
Fixup GetDFSRefer to prepare for cleanup of SMB response processing
Fix build warning in link.c

Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-05-15 06:20:02 +00:00
Steve French 646dd53987 [CIFS] Fix paths when share is in DFS to include proper prefix
Some versions of Samba (3.2-pre e.g.) are stricter about checking to make sure that
paths in DFS name spaces are sent in the form \\server\share\dir\subdir ...
instead of \dir\subdir

Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-05-15 01:50:56 +00:00
Steve French 582d21e5e3 [CIFS] cleanup old checkpatch warnings
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-05-13 04:54:12 +00:00
Jeff Layton d0a9c078db [CIFS] CIFS currently allows for permissions to be changed on files, even
when unix extensions and cifsacl support are disabled. These
permissions changes are "ephemeral" however. They are lost whenever
a share is mounted and unmounted, or when memory pressure forces
the inode out of the cache.

Because of this, we'd like to introduce a behavior change to make
CIFS behave more like local DOS/Windows filesystems. When unix
extensions and cifsacl support aren't enabled, then don't silently
ignore changes to permission bits that can't be reflected on the
server.

Still, there may be people relying on the current behavior for
certain applications. This patch adds a new "dynperm" (and a
corresponding "nodynperm") mount option that will be intended
to make the client fall back to legacy behavior when setting
these modes.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-05-12 22:23:49 +00:00
Steve French e691b9d1a0 [CIFS] don't allow demultiplex thread to exit until kthread_stop is called
cifs_demultiplex_thread can exit under several conditions:

1) if it's signaled
2) if there's a problem with session setup
3) if kthread_stop is called on it

The first two are problems. If kthread_stop is called on the thread,
there is no guarantee that it will still be up. We need to have the
thread stay up until kthread_stop is called on it.

One option would be to not even try to tear things down until after
kthread_stop is called. However, in the case where there is a problem
setting up the session, there's no real reason to try continuing the
loop.

This patch allows the thread to clean up and prepare for exit under all
three conditions, but it has the thread go to sleep until kthread_stop
is called. This allows us to simplify the shutdown code somewhat since
we can be reasonably sure that the thread won't exit after being
signaled but before kthread_stop is called.

It also removes the places where the thread itself set the tsk variable
since it appeared that it could have a potential race where the thread
might never be shut down.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-05-11 17:45:44 +00:00
Jeff Layton 02eadeffda [CIFS] add local struct inode pointer to cifs_setattr
Clean up cifs_setattr a bit by adding a local inode pointer, and
changing all of the direntry->d_inode references to it. This also adds a
bit of micro-optimization. d_inode shouldn't change over the life of
this function, so we only need to dereference it once.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-05-11 17:45:43 +00:00
Cyrill Gorcunov 1b20d67218 [CIFS] cifs_find_tcp_session cleanup
This patch cleans up cifs_find_tcp_session so it become
less indented. Also the error of skipping IPv6 matched
addresses fixed.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-05-11 17:45:43 +00:00
Igor Mammedov 7c5e628f95 [CIFS] Fixed build warning in is_ip
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-05-08 20:48:42 +00:00
Steve French cf432eb50f [CIFS] cleanup cifsd completion
Was a holdover from the old kernel_thread based cifsd
code. We needed to know that the thread had set the task variable
before proceeding. Now that kthread_run returns the new task, this
doesn't appear to be needed anymore.

As best I can tell, this sleep was intended to try to prevent
cifs_umount from freeing the cifsSesInfo struct before cifsd had
exited. Now that cifsd is using the kthread API, we know that
when kthread_stop returns that cifsd has exited, so I don't
think this is needed any longer.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Christop Hellwig <hch@infradead.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-05-06 22:27:16 +00:00
Steve French dea570e08a [CIFS] Remove over-indented code in find_unc().
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-05-06 22:05:51 +00:00
Steve French 4b18f2a9c3 [CIFS] convert usage of implicit booleans to bool
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-04-29 00:06:05 +00:00
Steve French 5d941ca628 [CIFS] Fix oops when slow oplock process races with unmount
If a tcon is being freed in call tconInfoFree, clean up any entries that may
exist in global oplock queue as the tcon structure hanging off of those entries
will be invalid and can cause oops while accesing any elements in the
tcon structure.

Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-04-15 18:40:48 +00:00
Steve French c2d68ea65b [CIFS] fix prepath conversion when server supports posix paths
Jeff Layton that we were converting \ to / in the posix path case which is
not always right (depends on what the old delim was).

CC: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-02-15 19:20:18 +00:00
Igor Mammedov 11b6d6450c [CIFS] Only convert / when server does not support posix paths
Also add warning if posix path setting changes on reconnect

Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-02-15 19:06:04 +00:00
Steve French 03a143c909 [CIFS] fixup prefixpaths which contain multiple path components
Currently, when we get a prefixpath as part of mount, the kernel only
changes the first character to be a '/' or '\' depending on whether
posix extensions are enabled. This is problematic as it expects
mount.cifs to pass in the correct delimiter in the rest of the
prefixpath. But, mount.cifs may not know *what* the correct delimiter
is. It's a chicken and egg problem.

Note that mount.cifs should not do conversion of the
prefixpath - if we want posix behavior then '\' is legal in a path
(and we have had bugs in the distant path to prove to me that
customers sometimes have apps that require '\').  The kernel code
assumes that the path passed in is posix (and current code will handle
the first path component fine but was broken for Windows mounts
for "deep" prefixpaths unless the user specified a prefixpath with '\'
deep in it.   So e.g. with current kernel code:

1) mount to //server/share/dir1 will work to all server types
2) mount to //server/share/dir1/subdir1 will work to Samba
3) mount to //server/share/dir1\\subdir1 will work to Windows

But case two would fail to Windows without the fix.
With the kernel cifs module fix case two now works.

First analyzed by Jeff Layton and Simo Sorce

CC: Jeff Layton <jlayton@redhat.com>
CC: Simo Sorce <simo@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-02-14 06:38:30 +00:00
Steve French 90c81e0b0e [CIFS] clean up some hard to read ifdefs
Christoph had noticed too many ifdefs in the CIFS code making it
hard to read.  This patch removes about a quarter of them from
the C files in cifs by improving a few key ifdefs in the .h files.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-02-12 20:32:36 +00:00
Steve French 366781c196 [CIFS] DFS build fixes
Also includes a few minor changes suggested by Christoph

Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-01-25 10:12:41 +00:00
Steve French 88e7d705c4 [CIFS] hold ses sem on tcp session reconnect during mount
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-01-03 17:37:09 +00:00
Jeff Layton 1d9a8852c3 [CIFS] redo existing session setup if needed in cifs_mount
When cifs_mount finds an existing SMB session that it can use for a new
mount, it does not check to see whether that session is in need of being
reconnected. An easy way to reproduce:

1) mount //server/share1
2) watch /proc/fs/cifs/DebugData for the share to go DISCONNECTED
3) mount //server/share2 with same creds as in step 1.

The second mount will fail because CIFSTCon returned -EAGAIN. If you do
an operation in share1 and then reattempt the mount it will work (since
the session is reestablished).

The following patch fixes this by having cifs_mount check the status
of the session when it picks an existing session and calling
cifs_setup_session on it again if it's in need of reconnection.

Thanks to Wojciech Pilorz for the initial bug report.

Signed-off-by: Jeff Layton <jlayton@tupile.poochiereds.net>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-12-31 01:37:11 +00:00
Petr Tesarik 2a97468024 [CIFS] Fix spurious reconnect on 2nd peek from read of SMB length
When retrying kernel_recvmsg() because of a short read, check returned
length against the remaining length, not against total length. This
avoids unneeded session reconnects which would otherwise occur when
kernel_recvmsg() finally returns zero when asked to read zero bytes.

Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-20 02:24:08 +00:00
Steve French 8840dee9dc [CIFS] minor checkpatch cleanup
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-16 23:05:52 +00:00
Jeff Layton c359cf3c61 [CIFS] add hostname field to TCP_Server_Info struct
...and populate it with the hostname portion of the UNC string.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-16 22:22:06 +00:00
Jeff Layton 70fe7dc055 [CIFS] clean up error handling in cifs_mount
Move all of the kfree's sprinkled in the middle of the function to the
end, and have the code set rc and just goto there on error. Also zero
out the password string before freeing it. Looks like this should also
fix a potential memory leak of the prepath string if an error occurs
near the end of the function.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-16 22:21:07 +00:00
Steve French 133672efbc [CIFS] Fix buffer overflow if server sends corrupt response to small
request

In SendReceive() function in transport.c - it memcpy's
message payload into a buffer passed via out_buf param. The function
assumes that all buffers are of size (CIFSMaxBufSize +
MAX_CIFS_HDR_SIZE) , unfortunately it is also called with smaller
(MAX_CIFS_SMALL_BUFFER_SIZE) buffers.  There are eight callers
(SMB worker functions) which are primarily affected by this change:

TreeDisconnect, uLogoff, Close, findClose, SetFileSize, SetFileTimes,
Lock and PosixLock

CC: Dave Kleikamp <shaggy@austin.ibm.com>
CC: Przemyslaw Wegrzyn <czajnik@czajsoft.pl>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-13 22:41:37 +00:00
Trond Myklebust 91cf45f02a [NET]: Add the helper kernel_sock_shutdown()
...and fix a couple of bugs in the NBD, CIFS and OCFS2 socket handlers.

Looking at the sock->op->shutdown() handlers, it looks as if all of them
take a SHUT_RD/SHUT_WR/SHUT_RDWR argument instead of the
RCV_SHUTDOWN/SEND_SHUTDOWN arguments.
Add a helper, and then define the SHUT_* enum to ensure that kernel users
of shutdown() don't get confused.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Mark Fasheh <mark.fasheh@oracle.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12 18:10:39 -08:00
Jeff Layton 9b8f5f5737 [CIFS] fix oops on second mount to same server when null auth is used
When a share is mounted using no username, cifs_mount sets
volume_info.username as a NULL pointer, and the sesInfo userName as an
empty string. The volume_info.username is passed to a couple of other
functions to see if there is an existing unc or tcp connection that can
be used. These functions assume that the username will be a valid
string that can be passed to strncmp. If the pointer is NULL, then the
kernel will oops if there's an existing session to which the string
can be compared.

This patch changes cifs_mount to set volume_info.username to an empty
string in this situation, which prevents the oops and should make it
so that the comparison to other null auth sessions match.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-09 23:25:04 +00:00
Steve French 7505e0525c [CIFS] If no Access Control Entries, set mode perm bits to zero
Also clean up ACL code

Acked-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-01 18:03:01 +00:00
Linus Torvalds 2843483d2e Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (51 commits)
  [CIFS] log better errors on failed mounts
  [CIFS] Return better error when server requires signing but client forbids
  [CIFS] fix typo
  [CIFS] acl support part 4
  [CIFS] Fix minor problems noticed by scan
  [CIFS] fix bad handling of EAGAIN error on kernel_recvmsg in cifs_demultiplex_thread
  [CIFS] build break
  [CIFS] endian fixes
  [CIFS] endian fixes in new acl code
  [CIFS] Fix some endianness problems in new acl code
  [CIFS] missing #endif from a previous patch
  [CIFS] formatting fixes
  [CIFS] Break up unicode_sessetup string functions
  [CIFS] parse server_GUID in SPNEGO negProt response
  [CIFS]
  [CIFS] Fix endian conversion problem in posix mkdir
  [CIFS] fix build break when lanman not enabled
  [CIFS] remove two sparse warnings
  [CIFS] remove compile warnings when debug disabled
  [CIFS] CIFS ACL support part 3
  ...
2007-10-19 12:00:58 -07:00
Pavel Emelyanov ba25f9dcc4 Use helpers to obtain task pid in printks
The task_struct->pid member is going to be deprecated, so start
using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in
the kernel.

The first thing to start with is the pid, printed to dmesg - in
this case we may safely use task_pid_nr(). Besides, printks produce
more (much more) than a half of all the explicit pid usage.

[akpm@linux-foundation.org: git-drm went and changed lots of stuff]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:43 -07:00
Steve French c18c732ec6 [CIFS] fix bad handling of EAGAIN error on kernel_recvmsg in cifs_demultiplex_thread
When kernel_recvmsg returns -EAGAIN or -ERESTARTSYS, then
cifs_demultiplex_thread sleeps for a bit and then tries the read again.
When it does this, it's not zeroing out the length and that throws off
the value of total_read. Fix it to zero out the length.

Can cause memory corruption:
If kernel_recvmsg returns an error and total_read is a large enough
value, then we'll end up going through the loop again. total_read will
be a bogus value, as will (pdu_length-total_read). When this happens we
end up calling kernel_recvmsg with a bogus value (possibly larger than
the current iov_len).

At that point, memcpy_toiovec can overrun iov. It will start walking
up the stack, casting other things that are there to struct iovecs
(since it assumes that it's been passed an array of them). Any pointer
on the stack at an address above the kvec is a candidate for corruption
here.

Many thanks to Ulrich Obergfell for pointing this out.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-10-17 18:01:11 +00:00
Cyrill Gorcunov 6345a3a880 [CIFS] formatting fixes
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-10-16 17:57:55 +00:00
Steve French a013689ddb [CIFS] Fix cifsd so shuts down when signing fails during mount
Fixes two problems:
1) we dropped down to negotiating lanman if we did not recognize the
mechanism (krb5 e.g.)
2) we did not stop cifsd (thus will fail when doing rmod cifs with
slab free errors) when we fail tcon but have a bad session (which is
the case in which signing is required but we don't allow signing on
the client)

It also turns on extended security flag in the header when passing
"sec=krb5" on mount command (although kerberos support is not done of
course)

Acked-by: Jeff Layton <jlayton@redhat.com>
CC: Shaggy <shaggy@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-10-04 20:05:09 +00:00
Mariusz Kozlowski a8a11d399f [CIFS] remove some redundant argument checks
This patch does kmalloc + memset conversion to kzalloc and removes some
redundant argument checks.

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-10-03 16:41:24 +00:00
Steve French 7f8ed420f8 [CIFS] CIFS support for named pipes (part 1)
This allows cifs to mount to ipc shares (IPC$)
which will allow user space applications to
layer over authenticated cifs connections
(useful for Wine and others that would want
to put DCE/RPC over CIFS or run CIFS named
pipes)

Acked-by: Rob Shearman <rob@codeweavers.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-09-28 22:28:55 +00:00
Steve French 442aa310f3 [CIFS] Support for CIFS ACLs (part 1)
Add code to be able to dump CIFS ACL information
when Query Posix ACL with cifsacl mount parm enabled.

Signed-off-by: Shirish Pargoankar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-09-24 20:25:46 +00:00
Steve French 2224f4e5d5 [CIFS] fix typo in previous commit
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-09-20 15:37:29 +00:00
Steve French 5a44b3190e [CIFS] Add warning message when broken server fails SetFSInfo call
A reasonably common NAS server returns an error on the SetFSInfo of
the Unix capabilities. Log a message for this alerting the user
that the server may have problems with the Unix extensions,
and telling them what they can do to workaround it.

Unfortunately the server does not return other clues
that we could easily use to turn the Unix Extension support
off automatically in this case (since they claim to support it).

Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-09-20 15:16:24 +00:00
Steve French 88f370a688 [CIFS] Fix potential NULL pointer usage if kzalloc fails
Potential problem was noticed by Cyrill Gorcunov

CC: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-09-15 03:01:17 +00:00
Steve French 638b250766 [CIFS] typo in earlier cifs_reconnect fix
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-09-15 02:35:51 +00:00
Steve French 77159b4df8 [CIFS] Fix warnings shown by newer version of sparse
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-08-31 01:10:17 +00:00
Steve French 26f57364d7 [CIFS] formatting cleanup found by checkpatch
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-08-30 22:09:15 +00:00
Steve French f01d5e14e7 [CIFS] fix for incorrect session reconnects
cifs reconnect could end up happening incorrectly due to
the small initial tcp recvmsg response. When the socket
was within three bytes of being full and the recvmsg
returned only 1 to 3 bytes of the initial 4 byte
read of the RFC1001 length field. Fortunately this
seems to be less common on more current kernels, but
this fixes it so cifs tries to retrieve all 4 bytes
of the initial tcp read.

Signed-off-by: Shirish Pargoankar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-08-30 21:13:31 +00:00
Steve French 1ff8392c32 Merge branch 'master' of /pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	fs/cifs/export.c
2007-07-19 00:38:57 +00:00
Steve French c18c842b1f [CIFS] Allow disabling CIFS Unix Extensions as mount option
Previously the only way to do this was to umount all mounts to that server,
turn off a proc setting (/proc/fs/cifs/LinuxExtensionsEnabled).

Fixes Samba bugzilla bug number: 4582 (and also 2008)

Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-07-18 23:21:09 +00:00
Steve French 63135e088a [CIFS] More whitespace/formatting fixes (noticed by checkpatch)
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-07-17 17:34:02 +00:00
Rafael J. Wysocki 8314418629 Freezer: make kernel threads nonfreezable by default
Currently, the freezer treats all tasks as freezable, except for the kernel
threads that explicitly set the PF_NOFREEZE flag for themselves.  This
approach is problematic, since it requires every kernel thread to either
set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't
care for the freezing of tasks at all.

It seems better to only require the kernel threads that want to or need to
be frozen to use some freezer-related code and to remove any
freezer-related code from the other (nonfreezable) kernel threads, which is
done in this patch.

The patch causes all kernel threads to be nonfreezable by default (ie.  to
have PF_NOFREEZE set by default) and introduces the set_freezable()
function that should be called by the freezable kernel threads in order to
unset PF_NOFREEZE.  It also makes all of the currently freezable kernel
threads call set_freezable(), so it shouldn't cause any (intentional)
change of behaviour to appear.  Additionally, it updates documentation to
describe the freezing of tasks more accurately.

[akpm@linux-foundation.org: build fixes]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:02 -07:00
Steve French 50c2f75388 [CIFS] whitespace/formatting fixes
This should be the last big batch of whitespace/formatting fixes.
checkpatch warnings for the cifs directory are down about 90% and
many of the remaining ones are harder to remove or make the code
harder to read.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-07-13 00:33:32 +00:00
Steve French fb8c4b14d9 [CIFS] whitespace cleanup
More than halfway there

Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-07-10 01:16:18 +00:00
Steve French b609f06ac4 [CIFS] Fix packet signatures for NTLMv2 case
Signed-off-by: Yehuda Sadeh Weinraub <Yehuda.Sadeh@expand.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-07-09 07:55:14 +00:00
Steve French 467a8f8d48 [CIFS] whitespace cleanup
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-06-27 22:41:32 +00:00
Jeff 5d9c720678 [CIFS] Do not allow signals in cifs_demultiplex_thread
Switch from send_sig to force_sig and do not allow signal for this
background thread (the signal is needed to wakeup the thread when
blocked in the network stack).

Signed-off-by: Jeff Layton <jlayton@readhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-06-25 22:16:35 +00:00
Steve French 75865f8cc8 [CIFS] Add in some missing flags and cifs README and TODO corrections
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-06-24 18:30:48 +00:00
Steve French f7f7c31c98 [CIFS] typo in previous patch
(also fixed missing space after if)

Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-05-24 02:29:51 +00:00
Steve French 28356a1679 [CIFS] Fix oops on failed cifs mount (in kthread_stop)
If the cifs demultiplex thread wakes up and exits
(zeroing server->tsk) before kthread_stop is called, the
cifs_mount code could pass a null pointer to kthread_stop

Thanks to akpm, Dave Young and Shaggy for suggesting
earlier versions of this patch.

CC: akpm@linux-foundatior.org
Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-05-23 14:45:36 +00:00
Jeff Layton 8426c39c12 [CIFS] Make sec=none force an anonymous mount
We had a customer report that attempting to make CIFS mount with a null
username (i.e. doing an anonymous mount) doesn't work. Looking through the
code, it looks like CIFS expects a NULL username from userspace in order
to trigger an anonymous mount. The mount.cifs code doesn't seem to ever
pass a null username to the kernel, however.

It looks also like the kernel can take a sec=none option, but it only seems
to look at it if the username is already NULL. This seems redundant and
effectively makes sec=none useless.

The following patch makes sec=none force an anonymous mount.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-05-05 03:27:49 +00:00
Steve French 0b2365f826 [CIFS] Fix oops in reset_cifs_unix_caps on reconnect
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-05-03 04:30:13 +00:00
Steve French 4523cc3044 [CIFS] UID/GID override on CIFS mounts to Samba
When CIFS Unix Extensions are negotiated we get the Unix uid and gid
owners of the file from the server (on the Unix Query Path Info
levels), but if the server's uids don't match the client uid's users
were having to disable the Unix Extensions (which turned off features
they still wanted).   The changeset patch allows users to override uid
and/or gid for file/directory owner with a default uid and/or gid
specified at mount (as is often done when mounting from Linux cifs
client to Windows server).  This changeset also displays the uid
and gid used by default in /proc/mounts (if applicable).

Also cleans up code by adding some of the missing spaces after
"if" keywords per-kernel style guidelines (as suggested by Randy Dunlap
when he reviewed the patch).

Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-04-30 20:13:06 +00:00
Steve French 984acfe1cf [CIFS] prefixpath mounts to servers supporting posix paths used wrong slash
Acked-by: Alexander Bokovoy <abokovoy@ru.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-04-26 16:42:50 +00:00
Steve French 5858ae44e2 [CIFS] Add IPv6 support
IPv6 support was started a few years ago in the cifs client, but lacked a
kernel helper function for parsing the ascii form of the ipv6 address. Now
that that is added (and now IPv6 is the default that some OS use now) it
was fairly easy to finish  the cifs ipv6 support.  This  requires that
CIFS_EXPERIMENTAL be enabled and (at least until the mount.cifs module is
modified to use a new ipv6 friendly call instead of gethostbyname) and the
ipv6 address be passed on the mount as "ip=" mount option.

Thanks

Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-04-25 11:59:10 +00:00
Igor Mammedov aaf737adb6 [CIFS] Switch cifsd to kthread_run from kernel_thread
cifsd was the only cifs thread that had not been switched to the newer
kthread interface

Signed-off-by: Igor Mammedov <niallain at gmail.com>
Signed-off-by: Wilhelm Meier <wilhelm.meier@fh-kl.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-04-03 19:16:43 +00:00
Steve French 8af1897158 [CIFS] on reconnect to Samba - reset the unix capabilities
After temporary server or network failure and reconneciton, we were not
resending the unix capabilities via SetFSInfo - which confused Samba posix
byte range locking code.

Discovered by jra

Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-02-14 04:42:51 +00:00
Nigel Cunningham 7dfb71030f [PATCH] Add include/linux/freezer.h and move definitions from sched.h
Move process freezing functions from include/linux/sched.h to freezer.h, so
that modifications to the freezer or the kernel configuration don't require
recompiling just about everything.

[akpm@osdl.org: fix ueagle driver]
Signed-off-by: Nigel Cunningham <nigel@suspend2.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:27 -08:00
Steve French 4b952a9b08 [CIFS] Allow null user connections
Some servers are configured to only allow null user mounts for
guest access.  Allow nul user (anonymous) mounts e.g.
	mount -t cifs //server/share /mnt -o username=

Signed-off-by: Steve French <sfrench@us.ibm.com>
2006-10-30 21:46:13 +00:00
Linus Torvalds 12e36b2f41 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (27 commits)
  [CIFS] Missing flags2 for DFS
  [CIFS] Workaround incomplete byte length returned by some
  [CIFS] cifs Kconfig: don't select CONNECTOR
  [CIFS] Level 1 QPathInfo needed for proper OS2 support
  [CIFS] fix typo in previous patch
  [CIFS] Fix old DOS time conversion to handle timezone
  [CIFS] Do not need to adjust for Jan/Feb for leap day
  [CIFS] Fix leaps year calculation for years after 2100
  [CIFS] readdir (ffirst) enablement of accurate timestamps from legacy servers
  [CIFS] Fix compiler warning with previous patch
  [CIFS] Fix typo
  [CIFS] Allow for 15 minute TZs (e.g. Nepal) and be more explicit about
  [CIFS] Fix readdir of large directories for backlevel servers
  [CIFS] Allow LANMAN21 support even in both POSIX non-POSIX path
  [CIFS] Make use of newer QFSInfo dependent on capability bit instead of
  [CIFS] Do not send newer QFSInfo to legacy servers which can not support it
  [CIFS] Fix typo in name of new cifs_show_stats
  [CIFS] Rename server time zone field
  [CIFS] Handle legacy servers which return undefined time zone
  [CIFS] CIFS support for /proc/<pid>/mountstats part 1
  ...

Manual conflict resolution in fs/cifs/connect.c
2006-10-13 08:09:29 -07:00
Steve French 1a4e15a04e [CIFS] Missing flags2 for DFS
Partly suggested by Igor Mammedov

Signed-off-by: Steve French <sfrench@us.ibm.com>
2006-10-12 21:33:51 +00:00
Serge E. Hallyn e9ff3990f0 [PATCH] namespaces: utsname: switch to using uts namespaces
Replace references to system_utsname to the per-process uts namespace
where appropriate.  This includes things like uname.

Changes: Per Eric Biederman's comments, use the per-process uts namespace
	for ELF_PLATFORM, sunrpc, and parts of net/ipv4/ipconfig.c

[jdike@addtoit.com: UML fix]
[clg@fr.ibm.com: cleanup]
[akpm@osdl.org: build fix]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:21 -07:00
Steve French 9ac00b7d96 [CIFS] Do not send newer QFSInfo to legacy servers which can not support it
Fix dialect negotiation to save off when we have negotiated lanman.
This allows us to avoid sending some somewhat newer requests that the server
can not handle and go directly to the older version (infolevel) of the same
call. Make sure we try to negotiate a level which allows us to get the
server OS (which we check so we can detect Win9x vs. other legacy servers
and eventually work around the Win9x DOS time bug (they reverse date/time
fields).

Signed-off-by: Steve French <sfrench@us.ibm.com>
2006-09-30 04:13:17 +00:00
Steve French 175ec9e11c [CIFS] Rename server time zone field
Server time zone is not really a time zone, rather a time adjustement
in seconds.

CC: Guenter Kukkukk <linux@kukkukk.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2006-09-30 01:07:38 +00:00
Steve French 2cd646a2d1 [CIFS] Remove static and unused symbols
Most cases of the ones found by Shaggy by
	"make namespacecheck"
could be removed or made static

Ack: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2006-09-28 19:43:08 +00:00
Steve French 2fe87f02a0 [CIFS] Support deep tree mounts (e.g. mounts to //server/share/path)
Samba bugzilla #4040

Signed-off-by: Steve French <sfrench@us.ibm.com>
2006-09-21 07:02:52 +00:00
Steve French e466e4876b [CIFS] Fix oops in cifs_close due to unitialized lock sem and list in
new POSIX locking code

Signed-off-by: Steve French <sfrench@us.ibm.com>
2006-08-15 13:07:18 +00:00
Steve French 6c3d8909d8 [CIFS] Allow cifsd to suspend if connection is lost
Make cifsd allow us to suspend if it has lost the connection with a server

Ref: http://bugzilla.kernel.org/show_bug.cgi?id=6811

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Steve French <sfrench@us.ibm.com>
(cherry picked from 27bd6cd87b0ada66515ad49bc346d77d1e9d3e05 commit)
2006-08-11 21:28:26 +00:00