Граф коммитов

1049 Коммитов

Автор SHA1 Сообщение Дата
Sagar Arun Kamble fd08923384 drm/i915: Suspend GuC prior to GPU Reset during GEM suspend
i915 is currently doing a full GPU reset at the end of
i915_gem_suspend() followed by GuC suspend in i915_drm_suspend(). This
GPU reset clobbers the GuC, causing the suspend request to then fail,
leaving the GuC in an undefined state. We need to tell the GuC to
suspend before we do the direct intel_gpu_reset().

v2: Commit message update. (Chris, Daniele)

Fixes: 1c777c5d1d ("drm/i915/hsw: Fix GPU hang during resume from S3-devices state")
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491387710-20553-1-git-send-email-sagar.a.kamble@intel.com
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-04-06 11:10:01 +01:00
Ville Syrjälä ff4c3b76ee drm/i915: Enable atomic on VLV/CHV
VLV/CHV watermarks are now able to handle the radiation, so
mark these platforms as ready for atomic.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Suggested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303151928.23053-5-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-05 13:22:37 +03:00
Oscar Mateo b8991403ea drm/i915/guc: Take enable_guc_loading check out of GEM core code
The should happen as soon as possible, but always within the logic that
depends on it (and not interrupting the top-level driver control flow).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490720027-23234-1-git-send-email-oscar.mateo@intel.com
2017-03-30 13:11:40 +03:00
Daniel Vetter 18dddadc78 drm/atomic: Introduce drm_atomic_helper_shutdown
The trouble here is that it does multiple atomic commits under one
drm_modeset_lock_all, which breaks the behind-the-scenes acquire
context magic that function pulls off. It's much better to have one
overall atomic commit. That we still have multiple atomic commits
prevents us from adding some pretty useful debug checks to the atomic
machinery.

Hence it is really a bad idea to call the legacy
drm_crtc_force_disable_all() function. There's 2 atomic drivers using
this still, nouveau and tinydrm. To fix this, introduce a new
drm_atomic_helper_shutdown() by extracting the code from i915.

While at it improve kernel-doc and catch future offenders by
sprinkling a WARN_ON into the legacy function. We should probably move
those into the legacy modeset helpers, too ...

v2: Make it compile on arm drivers too (Noralf).

v3: Correct kerneldoc to point at _disable_all().

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321164149.31531-1-daniel.vetter@ffwll.ch
2017-03-27 09:43:58 +02:00
Oscar Mateo 3950bf3dbf drm/i915/guc: Add onion teardown to the GuC setup
Starting with intel_guc_loader, down to intel_guc_submission
and finally to intel_guc_log.

v2:
  - Null execbuf client outside guc_client_free (Daniele)
  - Assert if things try to get allocated twice (Daniele/Joonas)
  - Null guc->log.buf_addr when destroyed (Daniele)
  - Newline between returning success and error labels (Joonas)
  - Remove some unnecessary comments (Joonas)
  - Keep guc_log_create_extras naming convention (Joonas)
  - Helper function guc_log_has_extras (Joonas)
  - No need for separate relay_channel create/destroy. It's just another extra.
  - No need to nullify guc->log.flush_wq when destroyed (Joonas)
  - Hoist the check for has_extras out of guc_log_create_extras (Joonas)
  - Try to do i915_guc_log_register/unregister calls (kind of) symmetric (Daniele)
  - Make sure initel_guc_fini is not called before init is ever called (Daniele)

v3:
  - Remove unnecessary parenthesis (Joonas)
  - Check for logs enabled on debugfs registration
  - Rebase on top of Tvrtko's "Fix request re-submission after reset"

v4:
  - Rebased
  - Comment around enabling/disabling interrupts inside GuC logging (Joonas)

Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-03-23 14:57:36 +02:00
Chris Wilson 2e8f9d3229 drm/i915: Restore engine->submit_request before unwedging
When we wedge the device, we override engine->submit_request with a nop
to ensure that all in-flight requests are marked in error. However, igt
would like to unwedge the device to test -EIO handling. This requires us
to flush those in-flight requests and restore the original
engine->submit_request.

v2: Use a vfunc to unify enabling request submission to engines
v3: Split new vfunc to a separate patch.
v4: Make the wait interruptible -- the third party fences we wait upon
may be indefinitely broken, so allow the reset to be aborted.

Fixes: 821ed7df6e ("drm/i915: Update reset path to fix incomplete requests")
Testcase: igt/gem_eio
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v3
Link: http://patchwork.freedesktop.org/patch/msgid/20170316171305.12972-3-chris@chris-wilson.co.uk
2017-03-16 17:17:14 +00:00
Chris Wilson 8c185ecaf4 drm/i915: Split I915_RESET_IN_PROGRESS into two flags
I915_RESET_IN_PROGRESS is being used for both signaling the requirement
to i915_mutex_lock_interruptible() to avoid taking the struct_mutex and
to instruct a waiter (already holding the struct_mutex) to perform the
reset. To allow for a little more coordination, split these two meaning
into a couple of distinct flags. I915_RESET_BACKOFF tells
i915_mutex_lock_interruptible() not to acquire the mutex and
I915_RESET_HANDOFF tells the waiter to call i915_reset().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316171305.12972-1-chris@chris-wilson.co.uk
2017-03-16 17:17:10 +00:00
Arkadiusz Hiler d2be9f2f41 drm/i915/guc: Extract param logic form guc_init_fw()
Let intel_guc_init_fw() focus on determining and fetching the correct
firmware.

This patch introduces intel_uc_sanitize_options() that is called from
intel_sanitize_options().

Then, if we have GuC, we can call intel_guc_init_fw() conditionally
and we do not have to do the internal checks.

v2: fix comment, notify when nuking GuC explicitly enabled (M. Wajdeczko)
v3: fix comment again, change the nuke message (M. Wajdeczko)
v4: update title to reflect new function name + rebase
v5: text && remove 2 uneccessary checks (M. Wajdeczko)

Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-03-15 14:26:30 +02:00
Arkadiusz Hiler 29ad6a30de drm/i915/uc: Introduce intel_uc_init_fw()
Instead of calling intel_guc_init() and intel_huc_init() one by one this
patch introduces intel_uc_init_fw() function that calls them both.

Called functions are renamed accordingly.

Trying to have subject_verb_object ordering and more descriptive names,
the intel_huc_init() and intel_guc_init() functions are renamed.

For guc_init():
 * `intel_guc` is the subject, so those functions now take intel_guc
   structure, instead of the dev_priv
 * init is the verb
 * fw is the object which better describes the function's role

huc_init() change follows the same reasoning.

v2: settle on intel_uc_fetch_fw name (M. Wajdeczko)
v3: yet another rename - intel_uc_init_fw (J. Lahtinen)
v4: non-trivial rebase

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-03-15 14:26:30 +02:00
Daniel Vetter 7d2ec88149 drm/i915: Merge pre/postclose hooks
There's really not a reason afaics that we can't just clean up
everything at the end, in the terminal postclose hook: Since this is
closing a file descriptor we know no one else can have a reference or
a thread doing something with that drm_file except the close code.
Ordering shouldn't matter, as long as we don't kfree before we clean
stuff up.

In the past this was more relevant when drivers still had to track and
clean up pending drm events, but that's all done by the core now.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-13-daniel.vetter@ffwll.ch
2017-03-14 14:38:31 +01:00
Chris Wilson 1b2e5ea0b7 drm/i915: Always call i915_gem_reset_finish() following i915_gem_reset_prepare()
As i915_gem_reset_finish() undoes the steps from
i915_gem_reset_prepare() to leave the system in a fully-working state,
e.g. to be able to free the breadcrumb signal threads, make sure that we
always call it even on the error path.

Fixes: da9a796f54 ("drm/i915: Split GEM resetting into 3 phases")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170212172002.23072-2-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
(cherry picked from commit 8d613c539c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-03-14 15:07:38 +02:00
Kenneth Graunke 0f5418e564 drm/i915: Drop support for I915_EXEC_CONSTANTS_* execbuf parameters.
This patch makes the I915_PARAM_HAS_EXEC_CONSTANTS getparam return 0
(indicating the optional feature is not supported), and makes execbuf
always return -EINVAL if the flags are used.

Apparently, no userspace ever shipped which used this optional feature:
I checked the git history of Mesa, xf86-video-intel, libva, and Beignet,
and there were zero commits showing a use of these flags.  Kernel commit
72bfa19c8d apparently introduced the feature prematurely.  According
to Chris, the intention was to use this in cairo-drm, but "the use was
broken for gen6", so I don't think it ever happened.

'relative_constants_mode' has always been tracked per-device, but this
has actually been wrong ever since hardware contexts were introduced, as
the INSTPM register is saved (and automatically restored) as part of the
render ring context. The software per-device value could therefore get
out of sync with the hardware per-context value.  This meant that using
them is actually unsafe: a client which tried to use them could damage
the state of other clients, causing the GPU to interpret their BO
offsets as absolute pointers, leading to bogus memory reads.

These flags were also never ported to execlist mode, making them no-ops
on Gen9+ (which requires execlists), and Gen8 in the default mode.

On Gen8+, userspace can write these registers directly, achieving the
same effect.  On Gen6-7.5, it likely makes sense to extend the command
parser to support them.  I don't think anyone wants this on Gen4-5.

Based on a patch by Dave Gordon.

v3: Return -ENODEV for the getparam, as this is what we do for other
    obsolete features.  Suggested by Chris Wilson.

Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92448
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215093446.21291-1-kenneth@whitecape.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170313170433.26843-1-chris@chris-wilson.co.uk
(cherry picked from commit ef0f411f51)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-03-14 12:28:25 +02:00
Chris Wilson da9a796f54 drm/i915: Split GEM resetting into 3 phases
Currently we do a reset prepare/finish around the call to reset the GPU,
but it looks like we need a later stage after the hw has been
reinitialised to allow GEM to restart itself. Start by splitting the 2
GEM phases into 3:

  prepare - before the reset, check if GEM recovered, then stop GEM

  reset - after the reset, update GEM bookkeeping

  finish - after the re-initialisation following the reset, restart GEM

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170208143033.11651-2-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/20170313165958.13970-1-chris@chris-wilson.co.uk
(cherry picked from commit d802709313)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-03-14 12:11:49 +02:00
Ville Syrjälä 44e921d4a1 drm/i915: Optimize VLV/CHV display FIFO updates
Use I915_{READ,WRITE}_FW() for updating the DSPARB registers on
VLV/CHV. This is less expesive as we can grab the uncore.lock across
the entire sequence of reads and writes instead of each register
access grabbing it.

This also allows us to eliminate the dsparb lock entirely as the
uncore.lock now effectively protects the contents of the DSPARB
registers.

v2: Add a note that interrupts are already disabled (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170309154434.29303-6-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-03-13 21:15:10 +02:00
Jani Nikula 665788572c drm/i915/vbt: don't propagate errors from intel_bios_init()
We don't use the error return for anything other than reporting and
logging that there is no VBT. We can pull the logging in the function,
and remove the error status return. Moreover, if we needed the
information for something later on, we'd probably be better off storing
the bit in dev_priv, and using it where it's needed, instead of using
the error return.

While at it, improve the comments.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/438ebbb0d5f0d321c625065b9cc78532a1dab24f.1489152288.git.jani.nikula@intel.com
2017-03-13 11:52:07 +02:00
Daniel Vetter f103560cf7 Merge tag 'topic/designware-baytrail-2017-03-02' of git://anongit.freedesktop.org/git/drm-intel into drm-intel-next-queued
Baytrail PMIC vs. PMU race fixes from Hans de Goede

This time the right version (v4), with the compile fix.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2017-03-13 09:26:06 +01:00
Dave Airlie 2e16101780 Merge tag 'drm-intel-next-2017-03-06' of git://anongit.freedesktop.org/git/drm-intel into drm-next
4 weeks worth of stuff since I was traveling&lazy:

- lspcon improvements (Imre)
- proper atomic state for cdclk handling (Ville)
- gpu reset improvements (Chris)
- lots and lots of polish around fences, requests, waiting and
  everything related all over (both gem and modeset code), from Chris
- atomic by default on gen5+ minus byt/bsw (Maarten did the patch to
  flip the default, really this is a massive joint team effort)
- moar power domains, now 64bit (Ander)
- big pile of in-kernel unit tests for various gem subsystems (Chris),
  including simple mock objects for i915 device and and the ggtt
  manager.
- i915_gpu_info in debugfs, for taking a snapshot of the current gpu
  state. Same thing as i915_error_state, but useful if the kernel didn't
  notice something is stick. From Chris.
- bxt dsi fixes (Umar Shankar)
- bxt w/a updates (Jani)
- no more struct_mutex for gem object unreference (Chris)
- some execlist refactoring (Tvrtko)
- color manager support for glk (Ander)
- improve the power-well sync code to better take over from the
  firmware (Imre)
- gem tracepoint polish (Tvrtko)
- lots of glk fixes all around (Ander)
- ctx switch improvements (Chris)
- glk dsi support&fixes (Deepak M)
- dsi fixes for vlv and clanups, lots of them (Hans de Goede)
- switch to i915.ko types in lots of our internal modeset code (Ander)
- byt/bsw atomic wm update code, yay (Ville)

* tag 'drm-intel-next-2017-03-06' of git://anongit.freedesktop.org/git/drm-intel: (432 commits)
  drm/i915: Update DRIVER_DATE to 20170306
  drm/i915: Don't use enums for hardware engine id
  drm/i915: Split breadcrumbs spinlock into two
  drm/i915: Refactor wakeup of the next breadcrumb waiter
  drm/i915: Take reference for signaling the request from hardirq
  drm/i915: Add FIFO underrun tracepoints
  drm/i915: Add cxsr toggle tracepoint
  drm/i915: Add VLV/CHV watermark/FIFO programming tracepoints
  drm/i915: Add plane update/disable tracepoints
  drm/i915: Kill level 0 wm hack for VLV/CHV
  drm/i915: Workaround VLV/CHV sprite1->sprite0 enable underrun
  drm/i915: Sanitize VLV/CHV watermarks properly
  drm/i915: Only use update_wm_{pre,post} for pre-ilk platforms
  drm/i915: Nuke crtc->wm.cxsr_allowed
  drm/i915: Compute proper intermediate wms for vlv/cvh
  drm/i915: Skip useless watermark/FIFO related work on VLV/CHV when not needed
  drm/i915: Compute vlv/chv wms the atomic way
  drm/i915: Compute VLV/CHV FIFO sizes based on the PM2 watermarks
  drm/i915: Plop vlv/chv fifo sizes into crtc state
  drm/i915: Plop vlv wm state into crtc_state
  ...
2017-03-08 12:41:47 +10:00
Dave Airlie b558dfd56a Merge tag 'drm-misc-next-2017-03-06' of git://anongit.freedesktop.org/git/drm-misc into drm-next
First slice of drm-misc-next for 4.12:

Core/subsystem-wide:
- link status core patch from Manasi, for signalling link train fail
  to userspace. I also had the i915 patch in here, but that had a
  small buglet in our CI, so reverted.
- more debugfs_remove removal from Noralf, almost there now (Noralf
  said he'll try to follow up with the stragglers).
- drm todo moved into kerneldoc, for better visibility (see
  Documentation/gpu/todo.rst), lots of starter tasks in there.
- devm_ of helpers + use it in sti (from Ben Gaignard, acked by Rob
  Herring)
- extended framebuffer fbdev support (for fbdev flipping), and vblank
  wait ioctl fbdev support (Maxime Ripard)
- misc small things all over, as usual
- add vblank callbacks to drm_crtc_funcs, plus make lots of good use
  of this to simplify drivers (Shawn Guo)
- new atomic iterator macros to unconfuse old vs. new state

Small drivers:
- vc4 improvements from Eric
- vc4 kerneldocs (Eric)!
- tons of improvements for dw-mipi-dsi in rockchip from John Keeping
  and Chris Zhong.
- MAINTAINERS entries for drivers managed in drm-misc. It's not yet
  official, still an experiment, but definitely not complete fail and
  better to avoid confusion. We kinda screwed that up with drm-misc a
  bit when we started committers last year.
- qxl atomic conversion (Gabriel Krisman)
- bunch of virtual driver polish (qxl, virgl, ...)
- misc tiny patches all over

This is the first time we've done the same merge-window blackout for
drm-misc as we've done for drm-intel for ages, hence why we have a
_lot_ of stuff queued already. But it's still only half of drm-intel
(room to grow!), and the drivers in drm-misc experiment seems to work
at least insofar as that you also get lots of driver updates here
alredy.

* tag 'drm-misc-next-2017-03-06' of git://anongit.freedesktop.org/git/drm-misc: (141 commits)
  drm/vc4: Fix OOPSes from trying to cache a partially constructed BO.
  drm/vc4: Fulfill user BO creation requests from the kernel BO cache.
  Revert "drm/i915: Implement Link Rate fallback on Link training failure"
  drm/fb-helper: implement ioctl FBIO_WAITFORVSYNC
  drm: Update drm_fbdev_cma_init documentation
  drm/rockchip/dsi: add dw-mipi power domain support
  drm/rockchip/dsi: fix insufficient bandwidth of some panel
  dt-bindings: add power domain node for dw-mipi-rockchip
  drm/rockchip/dsi: remove mode_valid function
  drm/rockchip/dsi: dw-mipi: correct the coding style
  drm/rockchip/dsi: dw-mipi: support RK3399 mipi dsi
  dt-bindings: add rk3399 support for dw-mipi-rockchip
  drm/rockchip: dw-mipi-dsi: add reset control
  drm/rockchip: dw-mipi-dsi: support non-burst modes
  drm/rockchip: dw-mipi-dsi: defer probe if panel is not loaded
  drm/rockchip: vop: test for P{H,V}SYNC
  drm/rockchip: dw-mipi-dsi: use positive check for N{H, V}SYNC
  drm/rockchip: dw-mipi-dsi: use specific poll helper
  drm/rockchip: dw-mipi-dsi: improve PLL configuration
  drm/rockchip: dw-mipi-dsi: properly configure PHY timing
  ...
2017-03-07 13:59:53 +10:00
Hans de Goede 68f60946c1 drm/i915: Add intel_uncore_suspend / resume functions
Rename intel_uncore_early_sanitize to intel_uncore_resume, dropping the
(always true) restore_forcewake argument and add a new intel_uncore_resume
function to replace the intel_uncore_forcewake_reset(dev_priv, false)
calls done from the suspend / runtime_suspend functions and make
intel_uncore_forcewake_reset private.

This is a preparation patch for adding PMIC bus access notifier support.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=155241
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: tagorereddy <tagore.chandan@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210102802.20898-12-hdegoede@redhat.com
2017-03-02 15:46:36 +01:00
Noralf Trønnes b05eeb0f47 drm/i915: Remove i915_debugfs_unregister()
drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so no need to do this explicitly. Additionally it
uses debugfs_remove_recursive() to clean up the debugfs files,
so no need for adding fake drm_info_node entries.

Cc: daniel.vetter@intel.com
Cc: jani.nikula@linux.intel.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-20-noralf@tronnes.org
2017-03-01 16:09:52 +01:00
Daniel Vetter c771633daf Merge airlied/drm-next into drm-misc-next
Backmerge the main pull request to sync up with all the newly landed
drivers. Otherwise we'll have chaos even before 4.12 started in
earnest.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2017-02-27 09:30:11 +01:00
Kenneth Graunke ef0f411f51 drm/i915: Drop support for I915_EXEC_CONSTANTS_* execbuf parameters.
This patch makes the I915_PARAM_HAS_EXEC_CONSTANTS getparam return 0
(indicating the optional feature is not supported), and makes execbuf
always return -EINVAL if the flags are used.

Apparently, no userspace ever shipped which used this optional feature:
I checked the git history of Mesa, xf86-video-intel, libva, and Beignet,
and there were zero commits showing a use of these flags.  Kernel commit
72bfa19c8d apparently introduced the feature prematurely.  According
to Chris, the intention was to use this in cairo-drm, but "the use was
broken for gen6", so I don't think it ever happened.

'relative_constants_mode' has always been tracked per-device, but this
has actually been wrong ever since hardware contexts were introduced, as
the INSTPM register is saved (and automatically restored) as part of the
render ring context. The software per-device value could therefore get
out of sync with the hardware per-context value.  This meant that using
them is actually unsafe: a client which tried to use them could damage
the state of other clients, causing the GPU to interpret their BO
offsets as absolute pointers, leading to bogus memory reads.

These flags were also never ported to execlist mode, making them no-ops
on Gen9+ (which requires execlists), and Gen8 in the default mode.

On Gen8+, userspace can write these registers directly, achieving the
same effect.  On Gen6-7.5, it likely makes sense to extend the command
parser to support them.  I don't think anyone wants this on Gen4-5.

Based on a patch by Dave Gordon.

v3: Return -ENODEV for the getparam, as this is what we do for other
    obsolete features.  Suggested by Chris Wilson.

Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92448
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215093446.21291-1-kenneth@whitecape.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-02-24 17:51:05 +00:00
Linus Torvalds ef96152e6a Less anger inducing pull request for 4.11
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYr5aeAAoJEAx081l5xIa+ZK4P/RD3XUsduYqziVFCRQ2n0X8r
 +D92F4peTnSeSq7ZcZvprv+fezUGAHbfsWFs8feYCI5quUO6pEQSPwN+wyGazUi0
 4hUVB/K9Iq7U/Bj7Z/SmsU3NuWJnkNqbmvSFvUdqYK9D/kl+Tnllzap2N4cTzjwu
 GZOObz4n85cx94NqC3qw+7/ptL1X2MhXa+z0MzbkKyas84Bko1LwCSHRHsDKUnJc
 IcSpOcYZ6pSRMIsKH4Kd79Go4vWm7djXT9XL3PwDk2NcXXUOuR+cfdHqYchYaM/O
 iD2hvaSywBcflxSAml5x6vlXraoRd91ZZulgOObXtFfnUXdZB81TVq4uv6LU4Bx3
 jLFixUZuk/TJT+W/8N10l7M6yMIFaTpNoNMc5n4IF5RNNyWba4BKnrI+f+lQiOpY
 mmjIaidb0t5BICnJzCD264RhCEXmP0HaDV+iQQV6y6jJRXfd1bgnOXLKP73JekzB
 TsbDshCoE7UO0dJ7n0LFpXSTQDTYzlazoEp14f2kFBxir5/l7r67nUlnDTvUQfuN
 tSRvpN/s0wqvH3o7zhmpHxyJ/ZasPMQjNCFAuUEbx8L5SKXsua0FubIzN4aVpilb
 XvfdFRWM/lkOT/q+8cGI/TcE3YTqEmALmGxdV/akbdNCiCg6aClyCLRE/DZhgmSQ
 UMFjr9wlHl5Qo/OqLKj0
 =Yjfg
 -----END PGP SIGNATURE-----

Merge tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for v4.11.

  Nothing too major, the tinydrm and mmu-less support should make
  writing smaller drivers easier for some of the simpler platforms, and
  there are a bunch of documentation updates.

  Intel grew displayport MST audio support which is hopefully useful to
  people, and FBC is on by default for GEN9+ (so people know where to
  look for regressions). AMDGPU has a lot of fixes that would like new
  firmware files installed for some GPUs.

  Other than that it's pretty scattered all over.

  I may have a follow up pull request as I know BenH has a bunch of AST
  rework and fixes and I'd like to get those in once they've been tested
  by AST, and I've got at least one pull request I'm just trying to get
  the author to fix up.

  Core:
   - drm_mm reworked
   - Connector list locking and iterators
   - Documentation updates
   - Format handling rework
   - MMU-less support for fbdev helpers
   - drm_crtc_from_index helper
   - Core CRC API
   - Remove drm_framebuffer_unregister_private
   - Debugfs cleanup
   - EDID/Infoframe fixes
   - Release callback
   - Tinydrm support (smaller drivers for simple hw)

  panel:
   - Add support for some new simple panels

  i915:
   - FBC by default for gen9+
   - Shared dpll cleanups and docs
   - GEN8 powerdomain cleanup
   - DMC support on GLK
   - DP MST audio support
   - HuC loading support
   - GVT init ordering fixes
   - GVT IOMMU workaround fix

  amdgpu/radeon:
   - Power/clockgating improvements
   - Preliminary SR-IOV support
   - TTM buffer priority and eviction fixes
   - SI DPM quirks removed due to firmware fixes
   - Powerplay improvements
   - VCE/UVD powergating fixes
   - Cleanup SI GFX code to match CI/VI
   - Support for > 2 displays on 3/5 crtc asics
   - SI headless fixes

  nouveau:
   - Rework securre boot code in prep for GP10x secure boot
   - Channel recovery improvements
   - Initial power budget code
   - MMU rework preperation

  vmwgfx:
   - Bunch of fixes and cleanups

  exynos:
   - Runtime PM support for MIC driver
   - Cleanups to use atomic helpers
   - UHD Support for TM2/TM2E boards
   - Trigger mode fix for Rinato board

  etnaviv:
   - Shader performance fix
   - Command stream validator fixes
   - Command buffer suballocator

  rockchip:
   - CDN DisplayPort support
   - IOMMU support for arm64 platform

  imx-drm:
   - Fix i.MX5 TV encoder probing
   - Remove lower fb size limits

  msm:
   - Support for HW cursor on MDP5 devices
   - DSI encoder cleanup
   - GPU DT bindings cleanup

  sti:
   - stih410 cleanups
   - Create fbdev at binding
   - HQVDP fixes
   - Remove stih416 chip functionality
   - DVI/HDMI mode selection fixes
   - FPS statistic reporting

  omapdrm:
   - IRQ code cleanup

  dwi-hdmi bridge:
   - Cleanups and fixes

  adv-bridge:
   - Updates for nexus

  sii8520 bridge:
   - Add interlace mode support
   - Rework HDMI and lots of fixes

  qxl:
   - probing/teardown cleanups

  ZTE drm:
   - HDMI audio via SPDIF interface
   - Video Layer overlay plane support
   - Add TV encoder output device

  atmel-hlcdc:
   - Rework fbdev creation logic

  tegra:
   - OF node fix

  fsl-dcu:
   - Minor fixes

  mali-dp:
   - Assorted fixes

  sunxi:
   - Minor fix"

[ This was the "fixed" pull, that still had build warnings due to people
  not even having build tested the result. I'm not a happy camper

  I've fixed the things I noticed up in this merge.      - Linus ]

* tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linux: (1177 commits)
  lib/Kconfig: make PRIME_NUMBERS not user selectable
  drm/tinydrm: helpers: Properly fix backlight dependency
  drm/tinydrm: mipi-dbi: Fix field width specifier warning
  drm/tinydrm: mipi-dbi: Silence: ‘cmd’ may be used uninitialized
  drm/sti: fix build warnings in sti_drv.c and sti_vtg.c files
  drm/amd/powerplay: fix PSI feature on Polars12
  drm/amdgpu: refuse to reserve io mem for split VRAM buffers
  drm/ttm: fix use-after-free races in vm fault handling
  drm/tinydrm: Add support for Multi-Inno MI0283QT display
  dt-bindings: Add Multi-Inno MI0283QT binding
  dt-bindings: display/panel: Add common rotation property
  of: Add vendor prefix for Multi-Inno
  drm/tinydrm: Add MIPI DBI support
  drm/tinydrm: Add helper functions
  drm: Add DRM support for tiny LCD displays
  drm/amd/amdgpu: post card if there is real hw resetting performed
  drm/nouveau/tmr: provide backtrace when a timeout is hit
  drm/nouveau/pci/g92: Fix rearm
  drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios
  drm/nouveau/hwmon: expose power_max and power_crit
  ..
2017-02-23 18:58:18 -08:00
Linus Torvalds 28cbc335d2 sound updates for 4.11-rc1
here is the update of sound bits for 4.11: again at this time, no big
 changes in ALSA and ASoC core but only cosmetic changes like
 consitifaction.  Meanwhile, quite a lot of developments are seen in
 a few driver side.
 
 ALSA Core:
 - Clean up, consitification of some ops
 
 HD-audio:
 - A slight behavior change of single_cmd option
 - Quirks for AmigaOne X1000, Samsung Ativ Book 8, Dell AiO, ALC221 HP,
   and fixes for Lewisburg controller
 - Realtek ALC299, ALC1220 codecs
 
 Others:
 - USB-audio: Tascam US-16x08 DSP mixer quirk
 - Intel HDMI LPE audio support for Baytrail / Cherrytrail; this
   contains some updates in drm/i915 for the new platform binding
 
 ASoC:
 - Lots of updates in Intel drivers, mostly for DisplayPort and HDMI
   on Skylake and onwards, as well as more Baytrail / Cherrytrail
   boards support
 - Channel mapping support for HDMI
 - Support for AllWinner A31 and A33, Everest Semiconductor ES8328,
   Nuvoton NAU8540.
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEECxfAB4MH3rD5mfB6bDGAVD0pKaQFAlivCQkOHHRpd2FpQHN1
 c2UuZGUACgkQbDGAVD0pKaTA9xAAgMpLZ7K7vBRlPKQAObPLf7ufciA5gDj+L6Lt
 5octKSAql5uuqU06nHyQd5BLXYmGj5Qe7+/fkfWJYNeOwUkHroi/G44DbGNIEG8s
 sXXStcEkOKdZw30G/fzMoDgoggqjWy6gAFgtSjhPkHwfnbmF1nFmeUJ9/so7y/Oc
 Q0l4Pdsg5t4fTZcejZyLHBLdFJ2EhsYWVoJpa1Wqrv2eChMvKq1s59i0EW0Gyw4u
 kHe/COcbMIHf0yZKEcxlsN6BsAe7ik7/mGZYozL05+9HfaOIdJfU7oqJmQyPV2hm
 BVDHVmhi9rMTJ//9WA4lOa8wwpojumoM2AMbzQGczBmGjQU1KguI2rS5FhGipz4c
 mYpAnEESpB19//pKdEK8oBNPldfZyCuyTOBFVAPFp8TpHvaJEoNOyEg1UAn1crpE
 f77OMok6/6DuOcapr76TxSHwg2ewWjsxRi8NrOUML/1uxaKTplSP1AsXBLCExQi1
 YnHn4H0wZOlOfX/jfodBDW0n6+V8kyZuv/jXMEqBWsIVIHk5UUAlDJ9AR+5K3D9e
 pRDRRww7480byY5h2aXBJbI8JjePuYwhJQxbYfsz55QU5rvTBcQAAfN11wXmWGol
 wSKvDyYgR/Zw1c93+HLcNv9+Ff6Wl9sIJFXwufzYOo3hKIrVUbXHeV8GT0io39zv
 IwJoaTI=
 =1cdN
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "Here is the update of sound bits for 4.11: again at this time, no big
  changes in ALSA and ASoC core but only cosmetic changes like
  consitifaction.

  Meanwhile, quite a lot of developments are seen in a few driver side.

  ALSA Core:
   - Clean up, consitification of some ops

  HD-audio:
   - A slight behavior change of single_cmd option
   - Quirks for AmigaOne X1000, Samsung Ativ Book 8, Dell AiO, ALC221
     HP, and fixes for Lewisburg controller
   - Realtek ALC299, ALC1220 codecs

  Others:
   - USB-audio: Tascam US-16x08 DSP mixer quirk
   - Intel HDMI LPE audio support for Baytrail / Cherrytrail; this
     contains some updates in drm/i915 for the new platform binding

  ASoC:
   - Lots of updates in Intel drivers, mostly for DisplayPort and HDMI
     on Skylake and onwards, as well as more Baytrail / Cherrytrail
     boards support
   - Channel mapping support for HDMI
   - Support for AllWinner A31 and A33, Everest Semiconductor ES8328,
     Nuvoton NAU8540.

* tag 'sound-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (323 commits)
  ALSA: usb-audio: Tidy up mixer_us16x08.c
  ALSA: usb-audio: Fix memory leak and corruption in mixer_us16x08.c
  ALSA: usb-audio: purge needless variable length array
  ALSA: x86: hdmi: select CONFIG_SND_PCM
  ALSA: x86: Don't enable runtime PM as default
  ALSA: x86: Use runtime PM autosuspend
  ALSA: usb-audio: localize function without external linkage
  ALSA: usb-audio: localize one-referrer variable
  ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk
  ALSA: emu10k1: constify snd_emux_operators structure
  ASoC: sun4i-spdif: drop unnessary snd_soc_unregister_component()
  ASoC: Intel: bxt: Add jack port initialize in bxt_rt298 machine
  ASoC: nau8825: automatic BCLK and LRC divde in master mode
  ASoC: hdac_hdmi: Add device id for Geminilake
  ASoC: Intel: Skylake: Add Geminlake IDs
  ASoC: rt298: Add DMI match for Geminilake reference platform
  ASoC: Intel: Skylake: Check device type to get endpoint configuration
  ASoC: Intel: bxt: Add jack port initialize in da7219_max98357a machine
  ASoC: Intel: Skylake: Add jack port initialize in nau88l25_ssm4567 machine
  ASoC: Intel: Skylake: Add jack port initialize in nau88l25_max98357a machine
  ...
2017-02-23 08:50:22 -08:00
Dave Airlie 94000cc329 Linux 4.10-rc8
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYoM2fAAoJEHm+PkMAQRiGr9MH/izEAMri7rJ0QMc3ejt+WmD0
 8pkZw3+MVn71z6cIEgpzk4QkEWJd5rfhkETCeCp7qQ9V6cDW1FDE9+0OmPjiphDt
 nnzKs7t7skEBwH5Mq5xygmIfkv+Z0QGHZ20gfQWY3F56Uxo+ARF88OBHBLKhqx3v
 98C7YbMFLKBslKClA78NUEIdx0UfBaRqerlERx0Lfl9aoOrbBS6WI3iuREiylpih
 9o7HTrwaGKkU4Kd6NdgJP2EyWPsd1LGalxBBjeDSpm5uokX6ALTdNXDZqcQscHjE
 RmTqJTGRdhSThXOpNnvUJvk9L442yuNRrVme/IqLpxMdHPyjaXR3FGSIDb2SfjY=
 =VMy8
 -----END PGP SIGNATURE-----

Merge tag 'v4.10-rc8' into drm-next

Linux 4.10-rc8

Backmerge Linus rc8 to fix some conflicts, but also
to avoid pulling it in via a fixes pull from someone.
2017-02-23 12:10:12 +10:00
Tvrtko Ursulin 784f2f1a9d drm/i915: Fix typo in semaphore debug message
Pronounces less rude when fixed.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170220104657.5237-1-tvrtko.ursulin@linux.intel.com
2017-02-20 11:24:58 +00:00
sagar.a.kamble@intel.com 3582ad1361 drm/i915: Do RPM Wake during GuC/HuC status read
HUC_STATUS, GUC_STATUS, SOFT_SCRATCH registers are read in debugfs
and getparam ioctl. This patch covers those accesses by RPM get/put.

v2: Covering access in i915_getparam(I915_PARAM_HUC_STATUS) (ChrisW)

Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Fiedorowicz, Lukasz <lukasz.fiedorowicz@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486110513-12130-1-git-send-email-sagar.a.kamble@intel.com
2017-02-16 10:06:17 +00:00
Chris Wilson 5a4c6f1b1b drm/i915: The return of i915_gpu_info to debugfs
Once upon a time before we had automated GPU state capture upon hangs,
we had intel_gpu_dump. Now we come almost full circle and reinstate that
view of the current GPU queues and registers by using the error capture
facility to snapshot the GPU state when debugfs/.../i915_gpu_info is
opened - which should provided useful debugging to both the error
capture routines (without having to cause a hang and avoid the error
state being eaten by igt) and generally.

v2: Rename drm_i915_error_state to i915_gpu_state to alleviate some name
collisions between the error state dump and inspecting the gpu state.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170214164611.11381-1-chris@chris-wilson.co.uk
2017-02-14 22:30:22 +00:00
Chris Wilson 66d9cb5d80 drm/i915: Mock the GEM device for self-testing
A simulacrum of drm_i915_private to let us pretend interactions with the
device.

v2: Tidy init error paths

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170213171558.20942-6-chris@chris-wilson.co.uk
2017-02-13 20:45:28 +00:00
Chris Wilson 8d613c539c drm/i915: Always call i915_gem_reset_finish() following i915_gem_reset_prepare()
As i915_gem_reset_finish() undoes the steps from
i915_gem_reset_prepare() to leave the system in a fully-working state,
e.g. to be able to free the breadcrumb signal threads, make sure that we
always call it even on the error path.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170212172002.23072-2-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
2017-02-13 11:18:18 +00:00
Chris Wilson cad3688ff0 drm/i915: Split device release from unload
We may need to keep our memory management alive after we have unloaded
the physical pci device. For example, if we have exported an object via
dmabuf, that will keep the device around but the pci device may be
removed before the dmabuf itself is released, use of the pci hardware
will be revoked, but the memory and object management needs to persist
for the dmabuf.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210163523.17533-1-chris@chris-wilson.co.uk
2017-02-10 19:10:05 +00:00
Lyude 317eaa9508 drm/i915/debugfs: Add i915_hpd_storm_ctl
This adds a file in i915's debugfs directory that allows userspace to
manually control HPD storm detection. This is mainly for hotplugging
tests, where we might want to test HPD storm functionality or disable
storm detection to speed up hotplugging tests without breaking anything.

Changes since v1:
- Make HPD storm interval configurable
- Misc code cleanup

Signed-off-by: Lyude <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Tomeu Vizoso <tomeu@tomeuvizoso.net>
2017-02-10 14:04:00 -05:00
Maarten Lankhorst 8d2b47dde8 drm/i915: Enable atomic support by default on supported platforms.
i915 is pretty much feature complete. Support for atomic i915-specific
connector properties is still missing; those properties can (for now)
only be set through the legacy ioctl.

ILK style watermarks and gen9+ watermarks are handled atomically,
and nonblocking modesets work. FBC has also been made to work with
atomic.

gen4x- and vlv/chv watermarks still need to be fixed, so disable atomic
by default there for now.

Flip the switch!!

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lyude <cpaul@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486021302-24910-1-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Fix checkpatch warning about extra space in match_info]
Acked-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Lyude <lyude@redhat.com>
2017-02-09 15:56:45 +01:00
Chris Wilson d802709313 drm/i915: Split GEM resetting into 3 phases
Currently we do a reset prepare/finish around the call to reset the GPU,
but it looks like we need a later stage after the hw has been
reinitialised to allow GEM to restart itself. Start by splitting the 2
GEM phases into 3:

  prepare - before the reset, check if GEM recovered, then stop GEM

  reset - after the reset, update GEM bookkeeping

  finish - after the re-initialisation following the reset, restart GEM

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170208143033.11651-2-chris@chris-wilson.co.uk
2017-02-08 16:24:42 +00:00
Chris Wilson 83bf6d55c1 drm/i915: Remove overzealous fence warn on runtime suspend
The goal of the WARN was to catch when we are still actively using the
fence as we go into the runtime suspend. However, the reg->pin_count is
too coarse as it does not distinguish between exclusive ownership of the
fence register from activity.

I've not improved on the WARN, nor have we captured this WARN in an
exact igt, but it is showing up regularly in the wild:

[ 1915.935332] WARNING: CPU: 1 PID: 10861 at drivers/gpu/drm/i915/i915_gem.c:2022 i915_gem_runtime_suspend+0x116/0x130 [i915]
[ 1915.935383] WARN_ON(reg->pin_count)[ 1915.935399] Modules linked in:
 snd_hda_intel i915 drm_kms_helper vgem netconsole scsi_transport_iscsi fuse vfat fat x86_pkg_temp_thermal coretemp intel_cstate intel_uncore snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mei_me mei serio_raw intel_rapl_perf intel_pch_thermal soundcore wmi acpi_pad i2c_algo_bit syscopyarea sysfillrect sysimgblt fb_sys_fops drm r8169 mii video [last unloaded: drm_kms_helper]
[ 1915.935785] CPU: 1 PID: 10861 Comm: kworker/1:0 Tainted: G     U  W       4.9.0-rc5+ #170
[ 1915.935799] Hardware name: LENOVO 80MX/Lenovo E31-80, BIOS DCCN34WW(V2.03) 12/01/2015
[ 1915.935822] Workqueue: pm pm_runtime_work
[ 1915.935845]  ffffc900044fbbf0 ffffffffac3220bc ffffc900044fbc40 0000000000000000
[ 1915.935890]  ffffc900044fbc30 ffffffffac059bcb 000007e6044fbc60 ffff8801626e3198
[ 1915.935937]  ffff8801626e0000 0000000000000002 ffffffffc05e5d4e 0000000000000000
[ 1915.935985] Call Trace:
[ 1915.936013]  [<ffffffffac3220bc>] dump_stack+0x4f/0x73
[ 1915.936038]  [<ffffffffac059bcb>] __warn+0xcb/0xf0
[ 1915.936060]  [<ffffffffac059c4f>] warn_slowpath_fmt+0x5f/0x80
[ 1915.936158]  [<ffffffffc052d916>] i915_gem_runtime_suspend+0x116/0x130 [i915]
[ 1915.936251]  [<ffffffffc04f1c74>] intel_runtime_suspend+0x64/0x280 [i915]
[ 1915.936277]  [<ffffffffac0926f1>] ? dequeue_entity+0x241/0xbc0
[ 1915.936298]  [<ffffffffac36bb85>] pci_pm_runtime_suspend+0x55/0x180
[ 1915.936317]  [<ffffffffac36bb30>] ? pci_pm_runtime_resume+0xa0/0xa0
[ 1915.936339]  [<ffffffffac4514e2>] __rpm_callback+0x32/0x70
[ 1915.936356]  [<ffffffffac451544>] rpm_callback+0x24/0x80
[ 1915.936375]  [<ffffffffac36bb30>] ? pci_pm_runtime_resume+0xa0/0xa0
[ 1915.936392]  [<ffffffffac45222d>] rpm_suspend+0x12d/0x680
[ 1915.936415]  [<ffffffffac69f6d7>] ? _raw_spin_unlock_irq+0x17/0x30
[ 1915.936435]  [<ffffffffac0810b8>] ? finish_task_switch+0x88/0x220
[ 1915.936455]  [<ffffffffac4534bf>] pm_runtime_work+0x6f/0xb0
[ 1915.936477]  [<ffffffffac074353>] process_one_work+0x1f3/0x4d0
[ 1915.936501]  [<ffffffffac074678>] worker_thread+0x48/0x4e0
[ 1915.936523]  [<ffffffffac074630>] ? process_one_work+0x4d0/0x4d0
[ 1915.936542]  [<ffffffffac074630>] ? process_one_work+0x4d0/0x4d0
[ 1915.936559]  [<ffffffffac07a2c9>] kthread+0xd9/0xf0
[ 1915.936580]  [<ffffffffac07a1f0>] ? kthread_park+0x60/0x60
[ 1915.936600]  [<ffffffffac69fe62>] ret_from_fork+0x22/0x30

In the case the register is pinned, it should be present and we will
need to invalidate them to be restored upon resume as we cannot expect
the owner of the pin to call get_fence prior to use after resume.

Fixes: 7c108fd8fe ("drm/i915: Move fence cancellation to runtime suspend")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98804
Reported-by: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Imre Deak <imre.deak@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20170203125717.8431-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit e0ec3ec698)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-02-08 13:27:27 +02:00
Jani Nikula 8532774811 drm/i915: don't warn about Skylake CPU - KabyPoint PCH combo
Apparently there are machines out there with Skylake CPU and KabyPoint
PCH. Judging from our driver code, there doesn't seem to be any code
paths that would do anything different between SunrisePoint and
KabyPoint PCHs, so it would seem okay to accept the combo without
warnings.

Fixes: 22dea0be50 ("drm/i915: Introduce Kabypoint PCH for Kabylake H/DT.")
References: https://lists.freedesktop.org/archives/intel-gfx/2017-February/118611.html
Reported-by: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Cc: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.8+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485956769-26015-1-git-send-email-jani.nikula@intel.com
(cherry picked from commit 3aac4acb89)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-02-08 13:10:36 +02:00
Chris Wilson e0ec3ec698 drm/i915: Remove overzealous fence warn on runtime suspend
The goal of the WARN was to catch when we are still actively using the
fence as we go into the runtime suspend. However, the reg->pin_count is
too coarse as it does not distinguish between exclusive ownership of the
fence register from activity.

I've not improved on the WARN, nor have we captured this WARN in an
exact igt, but it is showing up regularly in the wild:

[ 1915.935332] WARNING: CPU: 1 PID: 10861 at drivers/gpu/drm/i915/i915_gem.c:2022 i915_gem_runtime_suspend+0x116/0x130 [i915]
[ 1915.935383] WARN_ON(reg->pin_count)[ 1915.935399] Modules linked in:
 snd_hda_intel i915 drm_kms_helper vgem netconsole scsi_transport_iscsi fuse vfat fat x86_pkg_temp_thermal coretemp intel_cstate intel_uncore snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mei_me mei serio_raw intel_rapl_perf intel_pch_thermal soundcore wmi acpi_pad i2c_algo_bit syscopyarea sysfillrect sysimgblt fb_sys_fops drm r8169 mii video [last unloaded: drm_kms_helper]
[ 1915.935785] CPU: 1 PID: 10861 Comm: kworker/1:0 Tainted: G     U  W       4.9.0-rc5+ #170
[ 1915.935799] Hardware name: LENOVO 80MX/Lenovo E31-80, BIOS DCCN34WW(V2.03) 12/01/2015
[ 1915.935822] Workqueue: pm pm_runtime_work
[ 1915.935845]  ffffc900044fbbf0 ffffffffac3220bc ffffc900044fbc40 0000000000000000
[ 1915.935890]  ffffc900044fbc30 ffffffffac059bcb 000007e6044fbc60 ffff8801626e3198
[ 1915.935937]  ffff8801626e0000 0000000000000002 ffffffffc05e5d4e 0000000000000000
[ 1915.935985] Call Trace:
[ 1915.936013]  [<ffffffffac3220bc>] dump_stack+0x4f/0x73
[ 1915.936038]  [<ffffffffac059bcb>] __warn+0xcb/0xf0
[ 1915.936060]  [<ffffffffac059c4f>] warn_slowpath_fmt+0x5f/0x80
[ 1915.936158]  [<ffffffffc052d916>] i915_gem_runtime_suspend+0x116/0x130 [i915]
[ 1915.936251]  [<ffffffffc04f1c74>] intel_runtime_suspend+0x64/0x280 [i915]
[ 1915.936277]  [<ffffffffac0926f1>] ? dequeue_entity+0x241/0xbc0
[ 1915.936298]  [<ffffffffac36bb85>] pci_pm_runtime_suspend+0x55/0x180
[ 1915.936317]  [<ffffffffac36bb30>] ? pci_pm_runtime_resume+0xa0/0xa0
[ 1915.936339]  [<ffffffffac4514e2>] __rpm_callback+0x32/0x70
[ 1915.936356]  [<ffffffffac451544>] rpm_callback+0x24/0x80
[ 1915.936375]  [<ffffffffac36bb30>] ? pci_pm_runtime_resume+0xa0/0xa0
[ 1915.936392]  [<ffffffffac45222d>] rpm_suspend+0x12d/0x680
[ 1915.936415]  [<ffffffffac69f6d7>] ? _raw_spin_unlock_irq+0x17/0x30
[ 1915.936435]  [<ffffffffac0810b8>] ? finish_task_switch+0x88/0x220
[ 1915.936455]  [<ffffffffac4534bf>] pm_runtime_work+0x6f/0xb0
[ 1915.936477]  [<ffffffffac074353>] process_one_work+0x1f3/0x4d0
[ 1915.936501]  [<ffffffffac074678>] worker_thread+0x48/0x4e0
[ 1915.936523]  [<ffffffffac074630>] ? process_one_work+0x4d0/0x4d0
[ 1915.936542]  [<ffffffffac074630>] ? process_one_work+0x4d0/0x4d0
[ 1915.936559]  [<ffffffffac07a2c9>] kthread+0xd9/0xf0
[ 1915.936580]  [<ffffffffac07a1f0>] ? kthread_park+0x60/0x60
[ 1915.936600]  [<ffffffffac69fe62>] ret_from_fork+0x22/0x30

In the case the register is pinned, it should be present and we will
need to invalidate them to be restored upon resume as we cannot expect
the owner of the pin to call get_fence prior to use after resume.

Fixes: 7c108fd8fe ("drm/i915: Move fence cancellation to runtime suspend")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98804
Reported-by: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Imre Deak <imre.deak@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20170203125717.8431-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-02-07 14:37:37 +00:00
Zhenyu Wang 26f837e8e1 drm/i915: make intel_gvt_init() later instead of too early
Previously intel_gvt_init() was called very early even before
MMIO initialization which had several drawbacks:
- Have to handle MMIO access for initial MMIO state dump if golden
  state firmware is not available
- Hypervisor detection should depend on pvinfo only instead of detecting
  hypervisor status.
- Don't know hw resource size e.g aperture, ggtt size to determine
  for vGPU type, etc.

This trys to move intel_gvt_init() call late after required info
has already been initialized for GVT host.

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-02-07 17:21:06 +08:00
Takashi Iwai 1e94320ffe Merge branch 'for-linus' into for-next 2017-02-07 09:38:44 +01:00
Jani Nikula 3aac4acb89 drm/i915: don't warn about Skylake CPU - KabyPoint PCH combo
Apparently there are machines out there with Skylake CPU and KabyPoint
PCH. Judging from our driver code, there doesn't seem to be any code
paths that would do anything different between SunrisePoint and
KabyPoint PCHs, so it would seem okay to accept the combo without
warnings.

Fixes: 22dea0be50 ("drm/i915: Introduce Kabypoint PCH for Kabylake H/DT.")
References: https://lists.freedesktop.org/archives/intel-gfx/2017-February/118611.html
Reported-by: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Cc: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.8+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485956769-26015-1-git-send-email-jani.nikula@intel.com
2017-02-02 16:24:58 +02:00
Maarten Lankhorst a667fb402c drm/i915: Disable all crtcs during driver unload, v2.
We may keep the crtc's enabled when userspace unsets all framebuffers but
keeps the crtc active. This exposes a WARN in fbc_global disable, and
a lot of bugs in our hardware readout code. Solve this by disabling
all crtc's for now.

Changes since v1:
- Use lock_all_ctx instead of lock_all.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481812185-19098-4-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-02-01 22:04:37 +01:00
Chris Wilson 0102ba1fd8 drm/i915: Add early BXT sdv to the list of preproduction machines
Extend intel_detect_preproduction_hw() to include BXT A and B steppings.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Zanoni, Paulo R" <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170130104458.2653-3-chris@chris-wilson.co.uk
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-01-31 09:50:00 +00:00
Chris Wilson 7c5ff4a2c5 drm/i915: Mark the kernel as tainted if we fail the preproduction check
Preproduction sdv are not supported beyond the release of production
hardware, and continued use is ill-advised. Mark the kernel as tainted
to reinforce the error.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Zanoni, Paulo R" <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170130104458.2653-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-01-31 09:49:56 +00:00
Chris Wilson 248a124d6f drm/i915: Make intel_detect_preproduction_hw easier to extend
As we add new generations, we should keep detecting new pre-production
system development platforms that were temporarily enabled to facilitate
initial development and now superseded by production systems. To make
it easier to add more platforms, split the if into a series of logical
operations.

v2: s/sdv/pre/ - not all system development vehicles are for
preproduction usage.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Zanoni, Paulo R" <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170130104458.2653-1-chris@chris-wilson.co.uk
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-01-31 09:49:50 +00:00
Chris Wilson fec0445caa drm/i915: Support explicit fencing for execbuf
Now that the user can opt-out of implicit fencing, we need to give them
back control over the fencing. We employ sync_file to wrap our
drm_i915_gem_request and provide an fd that userspace can merge with
other sync_file fds and pass back to the kernel to wait upon before
future execution.

Testcase: igt/gem_exec_fence
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Chad Versace <chadversary@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170127094008.27489-2-chris@chris-wilson.co.uk
2017-01-27 19:55:48 +00:00
Chris Wilson 77ae995789 drm/i915: Enable userspace to opt-out of implicit fencing
Userspace is faced with a dilemma. The kernel requires implicit fencing
to manage resource usage (we always must wait for the GPU to finish
before releasing its PTE) and for third parties. However, userspace may
wish to avoid this serialisation if it is either using explicit fencing
between parties and wants more fine-grained access to buffers (e.g. it
may partition the buffer between uses and track fences on ranges rather
than the implicit fences tracking the whole object). It follows that
userspace needs a mechanism to avoid the kernel's serialisation on its
implicit fences before execbuf execution.

The next question is whether this is an object, execbuf or context flag.
Hybrid users (such as using explicit EGL_ANDROID_native_sync fencing on
shared winsys buffers, but implicit fencing on internal surfaces)
require a per-object level flag. Given that this flag need to be only
set once for the lifetime of the object, this reduces the convenience of
having an execbuf or context level flag (and avoids having multiple
pieces of uABI controlling the same feature).

Incorrect use of this flag will result in rendering corruption and GPU
hangs - but will not result in use-after-free or similar resource
tracking issues.

Serious caveat: write ordering is not strictly correct after setting
this flag on a render target on multiple engines. This affects all
subsequent GEM operations (execbuf, set-domain, pread) and shared
dma-buf operations. A fix is possible - but costly (both in terms of
further ABI changes and runtime overhead).

Testcase: igt/gem_exec_async
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Chad Versace <chadversary@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170127094008.27489-1-chris@chris-wilson.co.uk
2017-01-27 19:55:35 +00:00
Jerome Anand eef57324d9 drm/i915: setup bridge for HDMI LPE audio driver
Enable support for HDMI LPE audio mode on Baytrail and
Cherrytrail when HDaudio controller is not detected

Setup minimum required resources during i915_driver_load:
1. Create a platform device to share MMIO/IRQ resources
2. Make the platform device child of i915 device for runtime PM.
3. Create IRQ chip to forward HDMI LPE audio irqs.

HDMI LPE audio driver (a standalone sound driver) probes the
LPE audio device and creates a new sound card.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jerome Anand <jerome.anand@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-25 14:21:47 +01:00
Ander Conselvan de Oliveira 21d6e0bde5 drm/i915: Don't init hpd polling for vlv and chv from runtime_suspend()
An error in the condition for avoiding the call to intel_hpd_poll_init()
for valleyview and cherryview from intel_runtime_suspend() caused it to
be called unconditionally. Fix it.

Fixes: 19625e85c6 ("drm/i915: Enable polling when we don't have hpd")
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lyude <cpaul@redhat.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484922525-6131-2-git-send-email-ander.conselvan.de.oliveira@intel.com
(cherry picked from commit 04313b00b7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-01-25 12:42:36 +02:00
Chris Wilson 241455172b drm/i915: Reset the gpu on takeover
The GPU may be in an unknown state following resume and module load. The
previous occupant may have left contexts loaded, or other dangerous
state, which can cause an immediate GPU hang for us. The only save
course of action is to reset the GPU prior to using it - similarly to
how we reset the GPU prior to unload (before a second user may be
affected by our leftover state).

We need to reset the GPU very early in our load/resume sequence so that
any stale HW pointers are revoked prior to any resource allocations we
make (that may conflict).

A reset should only be a couple of milliseconds on a slow device, a cost
we should easily be able to absorb into our initialisation times.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170124110135.6418-2-chris@chris-wilson.co.uk
2017-01-24 12:29:48 +00:00
Chris Wilson bb8f0f5abd drm/i915: Split intel_engine allocation and initialisation
In order to reset the GPU early on in the module load sequence, we need
to allocate the basic engine structs (to populate the mmio offsets etc).
Currently, the engine initialisation allocates both the base struct and
also allocate auxiliary objects, which depend upon state setup quite
late in the load sequence. We split off the allocation callback for
later and allow ourselves to allocate the engine structs themselves
early.

v2: Different paint for the unwind following error.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170124110135.6418-1-chris@chris-wilson.co.uk
2017-01-24 12:29:47 +00:00
Ander Conselvan de Oliveira 04313b00b7 drm/i915: Don't init hpd polling for vlv and chv from runtime_suspend()
An error in the condition for avoiding the call to intel_hpd_poll_init()
for valleyview and cherryview from intel_runtime_suspend() caused it to
be called unconditionally. Fix it.

Fixes: 19625e85c6 ("drm/i915: Enable polling when we don't have hpd")
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lyude <cpaul@redhat.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484922525-6131-2-git-send-email-ander.conselvan.de.oliveira@intel.com
2017-01-23 10:26:56 +02:00
Anusha Srivatsa 5464cd6576 drm/i915/get_params: Add HuC status to getparams
This patch will allow for getparams to return the status of the HuC.
As the HuC has to be validated by the GuC this patch uses the validated
status to show when the HuC is loaded and ready for use. You cannot use
the loaded status as with the GuC as the HuC is verified after it is
loaded and is not usable until it is verified.

v2: removed the forewakes as the registers are already force-woken.
     (T.Ursulin)
v3: rebased on top of drm-tip. Removed any reference to intel_huc.h
v4: rebased. Rename I915_PARAM_HAS_HUC to I915_PARAM_HUC_STATUS.
Remove intel_is_huc_valid() since it is used only in one place.
Put the case of I915_PARAM_HAS_HUC() in the right place.
v5: rebased. Add a comment to specify that I915_READ(reg)
does not read garbage value. The register HUC_STATUS2 is force
woken and no rpm is needed.

Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484755558-1234-6-git-send-email-anusha.srivatsa@intel.com
2017-01-19 11:19:10 +02:00
Anusha Srivatsa bd132858e9 drm/i915/huc: Add HuC fw loading support
The HuC loading process is similar to GuC. The intel_uc_fw_fetch()
is used for both cases.

HuC loading needs to be before GuC loading. The WOPCM setting must
be done early before loading any of them.

v2: rebased on-top of drm-intel-nightly.
    removed if(HAS_GUC()) before the guc call. (D.Gordon)
    update huc_version number of format.
v3: rebased to drm-intel-nightly, changed the file name format to
    match the one in the huc package.
    Changed dev->dev_private to to_i915()
v4: moved function back to where it was.
    change wait_for_atomic to wait_for.
v5: rebased. Changed the year in the copyright message to reflect
the right year.Correct the comments,remove the unwanted WARN message,
replace drm_gem_object_unreference() with i915_gem_object_put().Make the
prototypes in intel_huc.h non-extern.
v6: rebased. Update the file construction done by HuC. It is similar to
GuC.Adopted the approach used in-
https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin>
v7: Change dev to dev_priv in macro definition.
Corrected comments.
v8: rebased on top of drm-tip. Updated functions intel_huc_load(),
intel_huc_init() and intel_uc_fw_fetch() to accept dev_priv instead of
dev. Moved contents of intel_huc.h to intel_uc.h.
v9: change SKL_FW_ to SKL_HUC_FW_. Add intel_ prefix to guc_wopcm_size().
Remove unwanted checks in intel_uc.h. Rename huc_fw in struct intel_huc to
simply fw to avoid redundency.
v10: rebased. Correct comments. Make intel_huc_fini() accept dev_priv
instead of dev like intel_huc_init() and intel_huc_load().Move definition
to i915_guc_reg.h from intel_uc.h. Clean DMA_CTRL bits after HuC DMA
transfer in huc_ucode_xfer() instead of guc_ucode_xfer(). Add suitable
WARNs to give extra info.
v11: rebased. Add proper bias for HuC and make sure there are
asserts on failure by using guc_ggtt_offset_vma(). Introduce
intel_huc.c and remove intel_huc_loader.c since it has functions that
do more than just loading.Correct year in copyright.
v12: remove invalidates that are not required anymore.

Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Tested-by: Xiang Haihao <haihao.xiang@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484755558-1234-1-git-send-email-anusha.srivatsa@intel.com
2017-01-19 11:18:55 +02:00
Chris Wilson 0e178aef8f drm/i915: Detect a failed GPU reset+recovery
If we can't recover the GPU after the reset, mark it as wedged to cancel
the outstanding tasks and to prevent new users from trying to use the
broken GPU.

v2: Check the same ring is hung again before declaring the reset broken.
v3: use engine_stalled (Mika)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484668747-9120-6-git-send-email-mika.kuoppala@intel.com
2017-01-18 10:47:26 +00:00
Chris Wilson 4c96554365 drm/i915: Move engine reset preparation to i915_gem_reset_prepare()
Now that we have prepare/finish routines for the GEM reset, move the
disabling of the engine->irq_tasklet into them to reduce repetition. The
device irq enable/disable is split out to ensure it is run first and
last always (even if the GPU reset fails).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484668747-9120-1-git-send-email-mika.kuoppala@intel.com
2017-01-18 10:44:20 +00:00
Michal Wajdeczko f9cda04867 drm/i915/guc: Move GuC log related functions into dedicated file
Functions supporting GuC logging capabilities were spread across
many files, with unnecessary exposures and mixed with unrelated
code. Dedicate file will make maintenance of all GuC functions
easier as more functions are coming to support GuC submissions.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170113174157.104492-1-michal.wajdeczko@intel.com
2017-01-18 07:29:04 +00:00
Michel Thierry df2105749a drm/i915: Update i915_reset parameter for kerneldoc
Since commit c033666a94 ("drm/i915: Store a i915 backpointer from
engine, and use it") i915_reset receives dev_priv, but the kerneldoc
was not updated.

Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112041817.1102-3-michel.thierry@intel.com
2017-01-12 16:10:41 +02:00
Chris Wilson 111dbcab3d drm/i915: Include ioctl in set-tiling and get-tiling function names
Make it clear that these functions are the user entry points for
the tiling/fence registers.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110121045.27144-1-chris@chris-wilson.co.uk
2017-01-10 15:29:13 +00:00
Rodrigo Vivi b9fd799e40 drm/i915/glk: Add missing bits to allow runtime pm suspend on GLK.
Besides having the DMC firmware in place and loaded let's
handle runtime suspend and dc9 as we do for Broxton.

Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481902946-18593-2-git-send-email-ander.conselvan.de.oliveira@intel.com
2017-01-10 11:03:57 +02:00
Chris Wilson b1ed35d917 drm/i915: Revoke fenced GTT mmapings across GPU reset
The fence registers are clobbered by a GPU reset. If there is concurrent
user access to a fenced region via a GTT mmaping, the access will not be
fenced during the reset (until we restore the fences afterwards). In order
to prevent invalid access during the reset, before we clobber the fences
first we must invalidate the GTT mmapings. Access to the mmap will then
be forced to fault in the page, and in handling the fault, i915_gem_fault()
will take the struct_mutex and wait upon the reset to complete.

v2: Fix up commentary.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99274
Testcase: igt/gem_mmap_gtt/hang
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104145110.1486-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2017-01-04 18:44:30 +00:00
Chris Wilson bdeb978506 drm/i915: Repeat flush of idle work during suspend
The idle work handler is self-arming - if it detects that it needs to
run again it will queue itself from its work handler. Take greater care
when trying to drain the idle work, and double check that it is flushed.

The free worker has a similar issue where it is armed by an RCU task
which may be running concurrently with us.

This should hopefully help with the sporadic WARN_ON(dev_priv->gt.awake)
from i915_gem_suspend.

v2: Reuse drain_freed_objects.
v3: Don't try to flush the freed objects from the shrinker, as it may be
underneath the struct_mutex already.
v4: do while and comment upon the excess rcu_barrier in drain_freed_objects

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161223145804.6605-2-chris@chris-wilson.co.uk
2016-12-23 16:07:11 +00:00
Tvrtko Ursulin 87a6752c43 drm/i915: Use DRM_DEV_ERROR in i915_driver_load
Now that it is available we don't have to open code a similar
error message ourselves.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1481051053-29783-1-git-send-email-tvrtko.ursulin@linux.intel.com
2016-12-08 12:31:33 +00:00
Mahesh Kumar a3a8986cb2 drm/i915/bxt: IPC WA for Broxton
Display Workarounds #1135
If IPC is enabled in BXT, display underruns are observed.
WA: The Line Time programmed in the WM_LINETIME register should be
half of the actual calculated Line Time.

Programmed Line Time = 1/2*Calculated Line Time

Changes since V1:
 - Add Workaround number in commit & code
Changes since V2 (from Paulo):
 - Bikeshed white space and make the WA tag look like the others

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161201154940.24446-3-mahesh1.kumar@intel.com
2016-12-07 16:30:34 -02:00
Ville Syrjälä 467a14d935 drm/i915: Protect DSPARB registers with a spinlock
Each DSPARB register can house bits for two separate pipes, hence
we must protect the registers during reprogramming so that parallel
FIFO reconfigurations happening simultaneosly on multiple pipes won't
corrupt each others values.

We'll use a new spinlock for this instead of the wm_mutex since we'll
have to move the DSPARB programming to happen from the vblank evade
critical section, and we can't use mutexes in there.

v2: Document why we use a spinlock instead of a mutex (Maarten)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480947208-18468-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-12-07 17:50:21 +02:00
Jani Nikula c0f86832e3 drm/i915: rename BROADWATER and CRESTLINE to I965G and I965GM, respectively
Add more consistency to our naming. Pineview remains the outlier. Keep
using code names for gen5+.

v2: rebased

Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481105584-23033-1-git-send-email-jani.nikula@intel.com
2016-12-07 15:18:33 +02:00
Matthew Auld a9a251c2ae drm/i915: make i915_suspend_switcheroo static
Looks like this was missed when unexporting, so let's keep sparse happy.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 7f26cb8801 ("drm/i915: Unexport VGA switcheroo functions")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161202102411.19831-1-matthew.auld@intel.com
2016-12-02 11:26:51 +00:00
Tvrtko Ursulin 192aa18142 drm/i915: Make intel_pm_setup take dev_priv
Function actually wants dev_priv so give it to it.

v2: Commit message. (Joonas Lahtinen)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480601805-14391-2-git-send-email-tvrtko.ursulin@linux.intel.com
2016-12-01 18:01:24 +00:00
Tvrtko Ursulin af6dc7425b drm/i915: Make i915_save/restore_state and intel_i2c_reset take dev_priv
dev_priv is more appropriate since it is used much more in these.

v2: Commit message and keep the local pdev variable. (Joonas Lahtinen)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2016-12-01 18:01:23 +00:00
Tvrtko Ursulin 12ff05e750 drm/i915: Make i915_destroy_error_state take dev_priv
Since it does not need dev at all.

Also change the stored pointer in struct i915_error_state_file_priv
to i915.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2016-12-01 18:01:23 +00:00
Tvrtko Ursulin 401964465f drm/i915: Make gmbus setup take dev_priv
Simplify the code by passing the right argument in.

v2: Commit message. (Joonas Lahtinen)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2016-12-01 18:01:22 +00:00
Tvrtko Ursulin 7f26cb8801 drm/i915: Unexport VGA switcheroo functions
They are only used in i915_drv.c so a forward declaration is enough.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2016-12-01 18:01:22 +00:00
Tvrtko Ursulin da5f53bf3c drm/i915: dev_priv cleanup in bridge/bar/mmio init code
dev_priv is more appropriate for these so converting saves
some lines of source.

v2: Commit message and keep the pdev local variable. (Joonas Lahtinen)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2016-12-01 18:01:17 +00:00
Tvrtko Ursulin cb15d9f8c3 drm/i915: More GEM init dev_priv cleanup
Simplifies the code to pass the right parameter in.

v2: Commit message. (Joonas Lahtinen)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2016-12-01 18:01:16 +00:00
Tvrtko Ursulin bf9e8429ab drm/i915: Make various init functions take dev_priv
Like GEM init, GUC init, MOCS init and context creation.

Enables them to lose dev_priv locals.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2016-12-01 18:01:15 +00:00
Imre Deak 908764f6d0 drm/i915/lspcon: Enable AUX interrupts for resume time initialization
For LSPCON initialization during system resume we need AUX
functionality, but we call the corresponding encoder reset hook with all
interrupts disabled. Without interrupts we'll do a poll-wait for AUX
transfer completions, which adds a significant delay if the transfers
timeout/need to be retried for some reason.

Fix this by enabling interrupts before calling the reset hooks. Note
that while this will enable AUX interrupts it will keep HPD interrupts
disabled, in a similar way to the init time output setup code.

This issue existed since LSPCON support was added.

v2:
- Rebased on drm-tip.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480448429-27739-1-git-send-email-imre.deak@intel.com
2016-12-01 15:22:50 +02:00
Daniel Vetter d4881a48a8 drm/i915: Remove dummy i915_kick_out_firmware_fb
Since

commit 44adece57e
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Aug 10 18:52:34 2016 +0200

    drm/fb-helper: Add a dummy remove_conflicting_framebuffers

the drm helpers take care of this for us.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161130110131.25668-1-daniel.vetter@ffwll.ch
2016-11-30 20:34:16 +01:00
Arkadiusz Hiler 413e8fdb6a drm/i915/guc: Init send_mutex in intel_uc_init_early()
send_mutex is used to serialise communication with GuC via
intel_guc_send().

Since functions that utilize it are no longer limited to submission,
initialization should be handled as a part of general setup.

v2: move initialization to *_early()

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1480096777-12573-5-git-send-email-arkadiusz.hiler@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-11-25 21:42:36 +00:00
Ander Conselvan de Oliveira c39055b072 drm/i915: Pass dev_priv to intel_setup_outputs()
Pass dev_priv to intel_setup_outputs() and functions called by it, since
those are all intel i915 specific functions. Also, in the majority of
the functions dev_priv is used more often than dev. In the rare cases
where there are a few calls back into drm core, a local dev variable was
added.

v2: Don't convert dev to &dev_priv->drm in intel_dsi_init. (Ville)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479910904-11005-1-git-send-email-ander.conselvan.de.oliveira@intel.com
2016-11-25 16:43:24 +02:00
Chris Wilson c2a126a46d drm/i915: Disable hangcheck when wedged
If the gpu reset fails and the machine is terminally wedged, further
hangchecks achieve nothing but noise. Disable them, with a corollary
that we re-enable hangchecking after a successful GPU reset in case the
user is artificially bringing the machine back to life through the debug
interface.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161122144121.7379-2-chris@chris-wilson.co.uk
2016-11-22 17:42:17 +00:00
Robert Bragg 442b8c06fc drm/i915: advertise available metrics via sysfs
Each metric set is given a sysfs entry like:

/sys/class/drm/card0/metrics/<guid>/id

This allows userspace to enumerate the specific sets that are available
for the current system. The 'id' file contains an unsigned integer that
can be used to open the associated metric set via
DRM_IOCTL_I915_PERF_OPEN. The <guid> is a globally unique ID for a
specific OA unit register configuration that can be reliably used by
userspace as a key to lookup corresponding counter meta data and
normalization equations.

The guid registry is currently maintained as part of gputop along with
the XML metric set descriptions and code generation scripts, ref:

 https://github.com/rib/gputop
 > gputop-data/guids.xml
 > scripts/update-guids.py
 > gputop-data/oa-*.xml
 > scripts/i915-perf-kernelgen.py

 $ make -C gputop-data -f Makefile.xml SYSFS=1 WHITELIST=RenderBasic

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-8-robert@sixbynine.org
2016-11-22 14:38:51 +01:00
Robert Bragg eec688e142 drm/i915: Add i915 perf infrastructure
Adds base i915 perf infrastructure for Gen performance metrics.

This adds a DRM_IOCTL_I915_PERF_OPEN ioctl that takes an array of uint64
properties to configure a stream of metrics and returns a new fd usable
with standard VFS system calls including read() to read typed and sized
records; ioctl() to enable or disable capture and poll() to wait for
data.

A stream is opened something like:

  uint64_t properties[] = {
      /* Single context sampling */
      DRM_I915_PERF_PROP_CTX_HANDLE,        ctx_handle,

      /* Include OA reports in samples */
      DRM_I915_PERF_PROP_SAMPLE_OA,         true,

      /* OA unit configuration */
      DRM_I915_PERF_PROP_OA_METRICS_SET,    metrics_set_id,
      DRM_I915_PERF_PROP_OA_FORMAT,         report_format,
      DRM_I915_PERF_PROP_OA_EXPONENT,       period_exponent,
   };
   struct drm_i915_perf_open_param parm = {
      .flags = I915_PERF_FLAG_FD_CLOEXEC |
               I915_PERF_FLAG_FD_NONBLOCK |
               I915_PERF_FLAG_DISABLED,
      .properties_ptr = (uint64_t)properties,
      .num_properties = sizeof(properties) / 16,
   };
   int fd = drmIoctl(drm_fd, DRM_IOCTL_I915_PERF_OPEN, &param);

Records read all start with a common { type, size } header with
DRM_I915_PERF_RECORD_SAMPLE being of most interest. Sample records
contain an extensible number of fields and it's the
DRM_I915_PERF_PROP_SAMPLE_xyz properties given when opening that
determine what's included in every sample.

No specific streams are supported yet so any attempt to open a stream
will return an error.

v2:
    use i915_gem_context_get() - Chris Wilson
v3:
    update read() interface to avoid passing state struct - Chris Wilson
    fix some rebase fallout, with i915-perf init/deinit
v4:
    s/DRM_IORW/DRM_IOW/ - Emil Velikov

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-2-robert@sixbynine.org
2016-11-22 14:27:18 +01:00
Tvrtko Ursulin 6315b5d33a drm/i915: dev_priv cleanup in intel_display.c
v2: Rebase.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-11-17 13:56:46 +00:00
Tvrtko Ursulin 275a991c03 drm/i915: dev_priv cleanup in i915_gem_gtt.c
Started with removing INTEL_INFO(dev) and cascaded into a quite
big trickle of function prototype changes. Still, I think it is
for the better.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-11-17 13:56:12 +00:00
Tvrtko Ursulin c6be607abc drm/i915: dev_priv and a small cascade of cleanups in i915_gem.c
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-11-17 13:55:26 +00:00
Daniel Vetter 3975797f3e Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued
Tvrtko needs

commit b3c11ac267
Author: Eric Engestrom <eric@engestrom.ch>
Date:   Sat Nov 12 01:12:56 2016 +0000

    drm: move allocation out of drm_get_format_name()

to be able to apply his patches without conflicts.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-11-17 14:32:57 +01:00
Chris Wilson 0de9136dbb drm/i915/scheduler: Signal the arrival of a new request
The start of the scheduler, add a hook into request submission for the
scheduler to see the arrival of new requests and prepare its runqueues.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-6-chris@chris-wilson.co.uk
2016-11-14 21:00:26 +00:00
Joonas Lahtinen d2ad3ae4ec drm/i915: Update i915_driver_load kerneldoc
Update i915_driver_load kerneldoc to match code.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478784994-2494-2-git-send-email-joonas.lahtinen@linux.intel.com
2016-11-14 14:30:34 +02:00
Tvrtko Ursulin 514e1d6480 drm/i915: Convert i915_drv.c to INTEL_GEN
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478270568-7902-2-git-send-email-tvrtko.ursulin@linux.intel.com
2016-11-11 14:58:27 +00:00
Tvrtko Ursulin b7f05d4ae0 drm/i915: Pass dev_priv to INTEL_INFO everywhere apart from the gen use
After this patch only conversion of INTEL_INFO(p)->gen to
INTEL_GEN(dev_priv) remains before the __I915__ macro can
be removed.

v2: Tidy vlv_compute_wm. (David Weinehall)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
2016-11-11 14:58:26 +00:00
Dave Airlie 3e91168a6a Merge tag 'topic/drm-misc-2016-11-10' of git://anongit.freedesktop.org/drm-intel into drm-next
- better atomic state debugging from Rob
- fence prep from gustavo
- sumits flushed out his backlog of pending dma-buf/fence patches from
  various people
- drm_mm leak debugging plus trying to appease Kconfig (Chris)
- a few misc things all over

* tag 'topic/drm-misc-2016-11-10' of git://anongit.freedesktop.org/drm-intel: (35 commits)
  drm: Make DRM_DEBUG_MM depend on STACKTRACE_SUPPORT
  drm/i915: Restrict DRM_DEBUG_MM automatic selection
  drm: Restrict stackdepot usage to builtin drm.ko
  drm/msm: module param to dump state on error irq
  drm/msm/mdp5: add atomic_print_state support
  drm/atomic: add debugfs file to dump out atomic state
  drm/atomic: add new drm_debug bit to dump atomic state
  drm: add helpers to go from plane state to drm_rect
  drm: add helper for printing to log or seq_file
  drm: helper macros to print composite types
  reservation: revert "wait only with non-zero timeout specified (v3)" v2
  drm/ttm: fix ttm_bo_wait
  dma-buf/fence: revert "don't wait when specified timeout is zero" (v2)
  dma-buf/fence: make timeout handling in fence_default_wait consistent (v2)
  drm/amdgpu: add the interface of waiting multiple fences (v4)
  dma-buf: return index of the first signaled fence (v2)
  MAINTAINERS: update Sync File Framework files
  dma-buf/sw_sync: put fence reference from the fence creation
  dma-buf/sw_sync: mark sync_timeline_create() static
  drm: Add stackdepot include for DRM_DEBUG_MM
  ...
2016-11-11 09:28:44 +10:00
Lyude e0b7006140 drm/i915: Reinit polling before hpd when resuming
Now that we don't run the connector reprobing from i915_drm_resume(), we
need to make it so we don't have to wait for reprobing to finish so that
we actually speed things up. In order to do this, we need to make sure
that i915_drm_resume() doesn't get blocked by i915_hpd_poll_init_work()
while trying to acquire the mode_config lock that
drm_kms_helper_poll_enable() needs to acquire.

The easiest way to do this is to just enable polling before hpd. This
shouldn't break anything since at that point we have everything else we
need for polling enabled.

As well, this should result in a rather significant improvement in how
quickly we can resume the system.

Signed-off-by: Lyude <lyude@redhat.com>
Tested-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Testcase: analyze_suspend.py -config config/suspend-callgraph.cfg -filter i915
2016-11-04 13:50:34 -04:00
Lyude f97f193613 drm/i915: Remove redundant reprobe in i915_drm_resume
Weine's investigation on benchmarking the suspend/resume process pointed
out a lot of the time in suspend/resume is being spent reprobing. While
the reprobing process is a lengthy one for good reason, we don't need to
hold up the entire suspend/resume process while we wait for it to
finish. Luckily as it turns out, we already trigger a full connector
reprobe in i915_hpd_poll_init_work(), so we can just ditch reprobing in
i915_drm_resume() entirely.

This won't lead to less time spent resuming just yet since now the
bottleneck will be waiting for the mode_config lock in
drm_kms_helper_poll_enable(), since that will be held as long as
i915_hpd_poll_init_work() is reprobing all of the connectors. But we'll
address that in the next patch.

Signed-off-by: Lyude <lyude@redhat.com>
Tested-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Testcase: analyze_suspend.py -config config/suspend-callgraph.cfg -filter i915
2016-11-04 13:50:13 -04:00
Jani Nikula 55edf41b69 drm: define drm_compat_ioctl NULL on CONFIG_COMPAT=n and reduce #ifdefs
If we define drm_compat_ioctl NULL on CONFIG_COMPAT=n, we don't have to
check for the config everywhere.

Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478014844-27454-1-git-send-email-jani.nikula@intel.com
2016-11-02 11:33:47 -04:00
Mika Kuoppala 3ac168a70b drm/i915: Move hangcheck code out from i915_irq.c
Create new file for hangcheck specific code, intel_hangcheck.c,
and move all related code in it.

v2: s/intel_engine_hangcheck/intel_engine (Chris)

No functional changes.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478018583-5816-1-git-send-email-mika.kuoppala@intel.com
2016-11-02 11:59:10 +02:00
Ville Syrjälä 712bf36449 drm/i915: Pass dev_priv to intel_suspend_hw()
Unify our approach to things by passing around dev_priv instead of dev.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-25-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-11-01 16:40:38 +02:00
Ville Syrjälä 46f16e631a drm/i915: Pass dev_priv to init_clock_gating
Unify our approach to things by passing around dev_priv instead of dev.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-24-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-11-01 16:40:38 +02:00
Ville Syrjälä a26e523921 drm/i915: Pass dev_priv to IS_BROADWATER/IS_CRESTLINE
Unify our approach to things by passing around dev_priv instead of dev.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-21-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-11-01 16:40:38 +02:00
Chris Wilson 7d5d59e527 drm/i915: Use the full hammer when shutting down the rcu tasks
To flush all call_rcu() tasks (here from i915_gem_free_object()) we need
to call rcu_barrier() (not synchronize_rcu()). If we don't then we may
still have objects being freed as we continue to teardown the driver -
in particular, the recently released rings may race with the memory
manager shutdown resulting in sporadic:

[  142.217186] WARNING: CPU: 7 PID: 6185 at drivers/gpu/drm/drm_mm.c:932 drm_mm_takedown+0x2e/0x40
[  142.217187] Memory manager not clean during takedown.
[  142.217187] Modules linked in: i915(-) x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel lpc_ich snd_hda_codec_realtek snd_hda_codec_generic mei_me mei snd_hda_codec_hdmi snd_hda_codec snd_hwdep snd_hda_core snd_pcm e1000e ptp pps_core [last unloaded: snd_hda_intel]
[  142.217199] CPU: 7 PID: 6185 Comm: rmmod Not tainted 4.9.0-rc2-CI-Trybot_242+ #1
[  142.217199] Hardware name: LENOVO 10AGS00601/SHARKBAY, BIOS FBKT34AUS 04/24/2013
[  142.217200]  ffffc90002ecfce0 ffffffff8142dd65 ffffc90002ecfd30 0000000000000000
[  142.217202]  ffffc90002ecfd20 ffffffff8107e4e6 000003a40778c2a8 ffff880401355c48
[  142.217204]  ffff88040778c2a8 ffffffffa040f3c0 ffffffffa040f4a0 00005621fbf8b1f0
[  142.217206] Call Trace:
[  142.217209]  [<ffffffff8142dd65>] dump_stack+0x67/0x92
[  142.217211]  [<ffffffff8107e4e6>] __warn+0xc6/0xe0
[  142.217213]  [<ffffffff8107e54a>] warn_slowpath_fmt+0x4a/0x50
[  142.217214]  [<ffffffff81559e3e>] drm_mm_takedown+0x2e/0x40
[  142.217236]  [<ffffffffa035c02a>] i915_gem_cleanup_stolen+0x1a/0x20 [i915]
[  142.217246]  [<ffffffffa034c581>] i915_ggtt_cleanup_hw+0x31/0xb0 [i915]
[  142.217253]  [<ffffffffa0310311>] i915_driver_cleanup_hw+0x31/0x40 [i915]
[  142.217260]  [<ffffffffa0312001>] i915_driver_unload+0x141/0x1a0 [i915]
[  142.217268]  [<ffffffffa031c2c4>] i915_pci_remove+0x14/0x20 [i915]
[  142.217269]  [<ffffffff8147d214>] pci_device_remove+0x34/0xb0
[  142.217271]  [<ffffffff8157b14c>] __device_release_driver+0x9c/0x150
[  142.217272]  [<ffffffff8157bcc6>] driver_detach+0xb6/0xc0
[  142.217273]  [<ffffffff8157abe3>] bus_remove_driver+0x53/0xd0
[  142.217274]  [<ffffffff8157c787>] driver_unregister+0x27/0x50
[  142.217276]  [<ffffffff8147c265>] pci_unregister_driver+0x25/0x70
[  142.217287]  [<ffffffffa03d764c>] i915_exit+0x1a/0x71 [i915]
[  142.217289]  [<ffffffff811136b3>] SyS_delete_module+0x193/0x1e0
[  142.217291]  [<ffffffff818174ae>] entry_SYSCALL_64_fastpath+0x1c/0xb1
[  142.217292] ---[ end trace 6fd164859c154772 ]---
[  142.217505] [drm:show_leaks] *ERROR* node [6b6b6b6b6b6b6b6b + 6b6b6b6b6b6b6b6b]: inserted at
                [<ffffffff81559ff3>] save_stack.isra.1+0x53/0xa0
                [<ffffffff8155a98d>] drm_mm_insert_node_in_range_generic+0x2ad/0x360
                [<ffffffffa035bf23>] i915_gem_stolen_insert_node_in_range+0x93/0xe0 [i915]
                [<ffffffffa035c855>] i915_gem_object_create_stolen+0x75/0xb0 [i915]
                [<ffffffffa036a51a>] intel_engine_create_ring+0x9a/0x140 [i915]
                [<ffffffffa036a921>] intel_init_ring_buffer+0xf1/0x440 [i915]
                [<ffffffffa036be1b>] intel_init_render_ring_buffer+0xab/0x1b0 [i915]
                [<ffffffffa0363d08>] intel_engines_init+0xc8/0x210 [i915]
                [<ffffffffa0355d7c>] i915_gem_init+0xac/0xf0 [i915]
                [<ffffffffa0311454>] i915_driver_load+0x9c4/0x1430 [i915]
                [<ffffffffa031c2f8>] i915_pci_probe+0x28/0x40 [i915]
                [<ffffffff8147d315>] pci_device_probe+0x85/0xf0
                [<ffffffff8157b7ff>] driver_probe_device+0x21f/0x430
                [<ffffffff8157baee>] __driver_attach+0xde/0xe0

In particular note that the node was being poisoned as we inspected the
list, a  clear indication that the object is being freed as we make the
assertion.

v2: Don't loop, just assert that we do all the work required as that
will be better at detecting further errors.

Fixes: fbbd37b36f ("drm/i915: Move object release to a freelist + worker")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161101084843.3961-1-chris@chris-wilson.co.uk
2016-11-01 09:30:08 +00:00
Ville Syrjälä b079bd17e3 drm/i915: Bail if plane/crtc init fails
Due to the plane->index not getting readjusted in drm_plane_cleanup(),
we can't continue initialization of some plane/crtc init fails.
Well, we sort of could I suppose if we left all initialized planes on
the list, but that would expose those planes to userspace as well.

But for crtcs the situation is even worse since we assume that
pipe==crtc index occasionally, so we can't really deal with a partially
initialize set of crtcs.

So seems safest to just abort the entire thing if anything goes wrong.
All the failure paths here are kmalloc()s anyway, so it seems unlikely
we'd get very far if these start failing.

v2: Add (enum plane) case to silence gcc

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477411083-19255-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-10-31 16:56:32 +02:00
Chris Wilson 73cb97010d drm/i915: Combine seqno + tracking into a global timeline struct
Our timelines are more than just a seqno. They also provide an ordered
list of requests to be executed. Due to the restriction of handling
individual address spaces, we are limited to a timeline per address
space but we use a fence context per engine within.

Our first step to introducing independent timelines per context (i.e. to
allow each context to have a queue of requests to execute that have a
defined set of dependencies on other requests) is to provide a timeline
abstraction for the global execution queue.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-23-chris@chris-wilson.co.uk
2016-10-28 20:53:51 +01:00
Chris Wilson f0cd518206 drm/i915: Use lockless object free
Having moved the locked phase of freeing an object to a separate worker,
we can now declare to the core that we only need the unlocked variant of
driver->gem_free_object, and can use the simple unreference internally.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-20-chris@chris-wilson.co.uk
2016-10-28 20:53:50 +01:00
Chris Wilson fbbd37b36f drm/i915: Move object release to a freelist + worker
We want to hide the latency of releasing objects and their backing
storage from the submission, so we move the actual free to a worker.
This allows us to switch to struct_mutex freeing of the object in the
next patch.

Furthermore, if we know that the object we are dereferencing remains valid
for the duration of our access, we can forgo the usual synchronisation
barriers and atomic reference counting. To ensure this we defer freeing
an object til after an RCU grace period, such that any lookup of the
object within an RCU read critical section will remain valid until
after we exit that critical section. We also employ this delay for
rate-limiting the serialisation on reallocation - we have to slow down
object creation in order to prevent resource starvation (in particular,
files).

v2: Return early in i915_gem_tiling() ioctl to skip over superfluous
work on error.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-19-chris@chris-wilson.co.uk
2016-10-28 20:53:49 +01:00
Akash Goel f824083559 drm/i915: Add a relay backed debugfs interface for capturing GuC logs
Added a new debugfs interface '/sys/kernel/debug/dri/guc_log' for the
User to capture GuC firmware logs. Availed relay framework to implement
the interface, where Driver will have to just use a relay API to store
snapshots of the GuC log buffer in the buffer managed by relay.
The snapshot will be taken when GuC firmware sends a log buffer flush
interrupt and up to four snapshots could be stored in the relay buffer.
The relay buffer will be operated in a mode where it will overwrite the
data not yet collected by User.
Besides mmap method, through which User can directly access the relay
buffer contents, relay also supports the 'poll' method. Through the 'poll'
call on log file, User can come to know whenever a new snapshot of the
log buffer is taken by Driver, so can run in tandem with the Driver and
capture the logs in a sustained/streaming manner, without any loss of data.

v2: Defer the creation of relay channel & associated debugfs file, as
    debugfs setup is now done at the end of i915 Driver load. (Chris)

v3:
- Switch to no-overwrite mode for relay.
- Fix the relay sub buffer switching sequence.

v4:
- Update i915 Kconfig to select RELAY config. (TvrtKo)
- Log a message when there is no sub buffer available to capture
  the GuC log buffer. (Tvrtko)
- Increase the number of relay sub buffers to 8 from 4, to have
  sufficient buffering for boot time logs

v5:
- Fix the alignment, indentation issues and some minor cleanup. (Tvrtko)
- Update the comment to elaborate on why a relay channel has to be
  associated with the debugfs file. (Tvrtko)

v6:
- Move the write to 'is_global' after the NULL check on parent directory
  dentry pointer. (Tvrtko)

v7: Add a BUG_ON to validate relay buffer allocation size. (Chris)

Testcase: igt/tools/intel_guc_logger

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-10-25 09:34:23 +01:00
Chris Wilson 7c108fd8fe drm/i915: Move fence cancellation to runtime suspend
At the moment, we have dependency on the RPM as a barrier itself in both
i915_gem_release_all_mmaps() and i915_gem_restore_fences().
i915_gem_restore_fences() is also called along !runtime pm paths, but we
can move the markup of lost fences alongside releasing the mmaps into a
common i915_gem_runtime_suspend(). This has the advantage of locating
all the tricky barrier dependencies into one location.

v2: Just mark the fence as invalid (fence->dirty) so that upon waking we
will be sure to clear the fence after use, or restore it to the correct
value before use. This makes sure that if the fence is left intact
across the sleep, we do not leave it pointing to a region of GTT for the
next unsuspecting user.

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Imre Deak <imre.deak@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161024124218.18252-5-chris@chris-wilson.co.uk
2016-10-24 13:45:38 +01:00
Chris Wilson 9c870d0367 drm/i915: Use RPM as the barrier for controlling user mmap access
We can remove the false coupling between RPM and struct mutex by the
observation that we can use the RPM wakeref as the barrier around user
mmap access. That is as we tear down the user's PTE atomically from
within rpm suspend and then to fault in new PTE requires the rpm
wakeref, means that no user access is possible through those PTE without
RPM being awake. Having made that observation, we can then remove the
presumption of having to take rpm outside of struct_mutex and so allow
fine grained acquisition of a wakeref around hw access rather than
having to remember to acquire the wakeref early on.

v2: Rejig placement of the new intel_runtime_pm_get() to be as tight
as possible around the GTT pread/pwrite.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161024124218.18252-2-chris@chris-wilson.co.uk
2016-10-24 13:45:35 +01:00
Chris Wilson 0525a062df drm/i915: Emit telltales for extra levels of debug upon initialisation
After printing our welcome message to the user, also include
supplementary details on what debugging is enabled (useful for us to
sanity check what extra safeguards are on for any random kernel).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161014132707.29039-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com
2016-10-19 08:41:41 +01:00
Imre Deak 4c494a5769 drm/i915: Fix mismatched INIT power domain disabling during suspend
Currently the display INIT power domain disabling/enabling happens in a
mismatched way in the suspend/resume_early hooks respectively. This can
leave display power wells incorrectly disabled in the resume hook if the
suspend sequence is aborted for some reason resulting in the
suspend/resume hooks getting called but the suspend_late/resume_early
hooks being skipped. In particular this change fixes "Unclaimed read
from register 0x1e1204" on BYT/BSW triggered from i915_drm_resume()->
intel_pps_unlock_regs_wa() when suspending with /sys/power/pm_test set
to devices.

Fixes: 85e9067933 ("drm/i915: disable power wells on suspend")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: David Weinehall <david.weinehall@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476358446-11621-1-git-send-email-imre.deak@intel.com
2016-10-14 14:33:57 +03:00
Tvrtko Ursulin 5db9401983 drm/i915: Make IS_GEN macros only take dev_priv
Saves 1416 bytes of .rodata strings.

v2: Add parantheses around dev_priv. (Ville Syrjala)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476352990-2504-1-git-send-email-tvrtko.ursulin@linux.intel.com
2016-10-14 12:23:22 +01:00
Tvrtko Ursulin 920a14b245 drm/i915: Make IS_CHERRYVIEW only take dev_priv
Saves 864 bytes of .rodata strings and ~100 of .text.

v2: Add parantheses around dev_priv. (Ville Syrjala)
v3: Rebase.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14 12:23:19 +01:00
Tvrtko Ursulin e2d214ae2b drm/i915: Make IS_BROXTON only take dev_priv
Saves 1392 bytes of .rodata strings.

Also change a few function/macro prototypes in i915_gem_gtt.c
from dev to dev_priv where it made more sense to do so.

v2: Add parantheses around dev_priv. (Ville Syrjala)
v3: Mention function prototype changes. (David Weinehall)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
2016-10-14 12:23:19 +01:00
Tvrtko Ursulin 0853723b89 drm/i915: Make IS_KABYLAKE only take dev_priv
Saves 1320 bytes of .rodata strings.

v2: Add parantheses around dev_priv. (Ville Syrjala)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14 12:23:19 +01:00
Tvrtko Ursulin 8652744b64 drm/i915: Make IS_BROADWELL only take dev_priv
Saves 1808 bytes of .rodata strings.

v2: Add parantheses around dev_priv. (Ville Syrjala)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14 12:23:19 +01:00
Tvrtko Ursulin fd6b8f43c9 drm/i915: Make IS_IVYBRIDGE only take dev_priv
Saves 848 bytes of .rodata strings.

v2: Add parantheses around dev_priv. (Ville Syrjala)
v3: Rebase.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14 12:23:19 +01:00
Tvrtko Ursulin 50a0bc9054 drm/i915: Make INTEL_DEVID only take dev_priv
Saves 4472 bytes of .rodata strings.

v2: Add parantheses around dev_priv. (Ville Syrjala)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14 12:23:19 +01:00
Tvrtko Ursulin 6772ffe023 drm/i915: Make HAS_RUNTIME_PM only take dev_priv
Saves 960 bytes of .rodata strings.

v2: Add parantheses around dev_priv. (Ville Syrjala)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14 12:23:19 +01:00
Akash Goel 3b3f1650b1 drm/i915: Allocate intel_engine_cs structure only for the enabled engines
With the possibility of addition of many more number of rings in future,
the drm_i915_private structure could bloat as an array, of type
intel_engine_cs, is embedded inside it.
	struct intel_engine_cs engine[I915_NUM_ENGINES];
Though this is still fine as generally there is only a single instance of
drm_i915_private structure used, but not all of the possible rings would be
enabled or active on most of the platforms. Some memory can be saved by
allocating intel_engine_cs structure only for the enabled/active engines.
Currently the engine/ring ID is kept static and dev_priv->engine[] is simply
indexed using the enums defined in intel_engine_id.
To save memory and continue using the static engine/ring IDs, 'engine' is
defined as an array of pointers.
	struct intel_engine_cs *engine[I915_NUM_ENGINES];
dev_priv->engine[engine_ID] will be NULL for disabled engine instances.

There is a text size reduction of 928 bytes, from 1028200 to 1027272, for
i915.o file (but for i915.ko file text size remain same as 1193131 bytes).

v2:
- Remove the engine iterator field added in drm_i915_private structure,
  instead pass a local iterator variable to the for_each_engine**
  macros. (Chris)
- Do away with intel_engine_initialized() and instead directly use the
  NULL pointer check on engine pointer. (Chris)

v3:
- Remove for_each_engine_id() macro, as the updated macro for_each_engine()
  can be used in place of it. (Chris)
- Protect the access to Render engine Fault register with a NULL check, as
  engine specific init is done later in Driver load sequence.

v4:
- Use !!dev_priv->engine[VCS] style for the engine check in getparam. (Chris)
- Kill the superfluous init_engine_lists().

v5:
- Cleanup the intel_engines_init() & intel_engines_setup(), with respect to
  allocation of intel_engine_cs structure. (Chris)

v6:
- Rebase.

v7:
- Optimize the for_each_engine_masked() macro. (Chris)
- Change the type of 'iter' local variable to enum intel_engine_id. (Chris)
- Rebase.

v8: Rebase.

v9: Rebase.

v10:
- For index calculation use engine ID instead of pointer based arithmetic in
  intel_engine_sync_index() as engine pointers are not contiguous now (Chris)
- For appropriateness, rename local enum variable 'iter' to 'id'. (Joonas)
- Use for_each_engine macro for cleanup in intel_engines_init() and remove
  check for NULL engine pointer in cleanup() routines. (Joonas)

v11: Rebase.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476378888-7372-1-git-send-email-akash.goel@intel.com
2016-10-14 09:58:43 +01:00
Imre Deak 1c777c5d1d drm/i915/hsw: Fix GPU hang during resume from S3-devices state
Currently resuming on HSW from S3 pm_test/devices state leads to an
unrecoverable GPU hang. Resetting the GPU during suspend fixes this. For
a full S3 cycle this change only means the reset happens earlier (before
reaching S3). For S4 the reset will happen now both during the freeze
and quiesce phases, which is a benefit since it will guarantee that the
GPU is idle before creating and loading the hibernation image.

Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1476283597-580-1-git-send-email-imre.deak@intel.com
2016-10-13 12:11:31 +03:00
Chris Wilson 9e60ab0387 drm/i915: Disable irqs across GPU reset
Whilst we reset the GPU, we want to prevent execlists from submitting
new work (which it does via an interrupt handler). To achieve this we
disable the irq (and drain the irq tasklet) around the reset. When we
enable it again afters, the interrupt queue should be empty and we can
reinitialise from a known state without fear of the tasklet running
concurrently.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161004201132.21801-4-chris@chris-wilson.co.uk
2016-10-05 08:40:06 +01:00
Paulo Zanoni 4fc7e845f3 drm/i915/skl: tell the user about pre-production hardware
We just removed the implementation for all the pre-production
workarounds, so now tell the user that we expect his machine to not
work properly. Also convert this to DRM_ERROR so we can more easily
spot these problems in bug reports and CI/QA runs.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474891672-23414-2-git-send-email-jani.nikula@intel.com
2016-09-27 09:30:39 +03:00
Chris Wilson 6a800eabba drm/i915: Only shrink the unbound objects during freeze
At the point of creating the hibernation image, the runtime power manage
core is disabled - and using the rpm functions triggers a warn.
i915_gem_shrink_all() tries to unbind objects, which requires device
access and so tries to how an rpm reference triggering a warning:

[   44.235420] ------------[ cut here ]------------
[   44.235424] WARNING: CPU: 2 PID: 2199 at drivers/gpu/drm/i915/intel_runtime_pm.c:2688 intel_runtime_pm_get_if_in_use+0xe6/0xf0
[   44.235426] WARN_ON_ONCE(ret < 0)
[   44.235445] Modules linked in: ctr ccm arc4 rt2800usb rt2x00usb rt2800lib rt2x00lib crc_ccitt mac80211 cmac cfg80211 btusb rfcomm bnep btrtl btbcm btintel bluetooth dcdbas x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_codec_realtek crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic aesni_intel snd_hda_codec_hdmi aes_x86_64 lrw gf128mul snd_hda_intel glue_helper ablk_helper cryptd snd_hda_codec hid_multitouch joydev snd_hda_core binfmt_misc i2c_hid serio_raw snd_pcm acpi_pad snd_timer snd i2c_designware_platform 8250_dw nls_iso8859_1 i2c_designware_core lpc_ich mfd_core soundcore usbhid hid psmouse ahci libahci
[   44.235447] CPU: 2 PID: 2199 Comm: kworker/u8:8 Not tainted 4.8.0-rc5+ #130
[   44.235447] Hardware name: Dell Inc. XPS 13 9343/0310JH, BIOS A07 11/11/2015
[   44.235450] Workqueue: events_unbound async_run_entry_fn
[   44.235453]  0000000000000000 ffff8801b2f7fb98 ffffffff81306c2f ffff8801b2f7fbe8
[   44.235454]  0000000000000000 ffff8801b2f7fbd8 ffffffff81056c01 00000a801f50ecc0
[   44.235456]  ffff88020ce50000 ffff88020ce59b60 ffffffff81a60b5c ffffffff81414840
[   44.235456] Call Trace:
[   44.235459]  [<ffffffff81306c2f>] dump_stack+0x4d/0x6e
[   44.235461]  [<ffffffff81056c01>] __warn+0xd1/0xf0
[   44.235464]  [<ffffffff81414840>] ? i915_pm_suspend_late+0x30/0x30
[   44.235465]  [<ffffffff81056c6f>] warn_slowpath_fmt+0x4f/0x60
[   44.235468]  [<ffffffff814e73ce>] ? pm_runtime_get_if_in_use+0x6e/0xa0
[   44.235469]  [<ffffffff81433526>] intel_runtime_pm_get_if_in_use+0xe6/0xf0
[   44.235471]  [<ffffffff81458a26>] i915_gem_shrink+0x306/0x360
[   44.235473]  [<ffffffff81343fd4>] ? pci_platform_power_transition+0x24/0x90
[   44.235475]  [<ffffffff81414840>] ? i915_pm_suspend_late+0x30/0x30
[   44.235476]  [<ffffffff81458dfb>] i915_gem_shrink_all+0x1b/0x30
[   44.235478]  [<ffffffff814560b3>] i915_gem_freeze_late+0x33/0x90
[   44.235479]  [<ffffffff81414877>] i915_pm_freeze_late+0x37/0x40
[   44.235481]  [<ffffffff814e9b8e>] dpm_run_callback+0x4e/0x130
[   44.235483]  [<ffffffff814ea5db>] __device_suspend_late+0xdb/0x1f0
[   44.235484]  [<ffffffff814ea70f>] async_suspend_late+0x1f/0xa0
[   44.235486]  [<ffffffff81077557>] async_run_entry_fn+0x37/0x150
[   44.235488]  [<ffffffff8106f518>] process_one_work+0x148/0x3f0
[   44.235490]  [<ffffffff8106f8eb>] worker_thread+0x12b/0x490
[   44.235491]  [<ffffffff8106f7c0>] ? process_one_work+0x3f0/0x3f0
[   44.235492]  [<ffffffff81074d09>] kthread+0xc9/0xe0
[   44.235495]  [<ffffffff816e257f>] ret_from_fork+0x1f/0x40
[   44.235496]  [<ffffffff81074c40>] ? kthread_park+0x60/0x60
[   44.235497] ---[ end trace e438706b97c7f132 ]---

Alternatively, to actually shrink everything we have to do so slightly
earlier in the hibernation process.

To keep lockdep silent, we need to take struct_mutex for the shrinker
even though we know that we are the only user during the freeze.

Fixes: 7aab2d534e ("drm/i915: Shrink objects prior to hibernation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160921135108.29574-2-chris@chris-wilson.co.uk
2016-09-21 16:57:06 +01:00
Chris Wilson f2a91d1a6f drm/i915: Restore current RPS state after reset
Following commit 821ed7df6e ("drm/i915: Update reset path to fix
incomplete requests") we no longer mark the context as lost on reset as
we keep the requests (and contexts) alive. However, RPS remains reset
and we need to restore the current state to match the in-flight
requests.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97824
Fixes: 821ed7df6e ("drm/i915: Update reset path to fix incomplete requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160921135108.29574-1-chris@chris-wilson.co.uk
2016-09-21 16:52:39 +01:00
Chris Wilson 821ed7df6e drm/i915: Update reset path to fix incomplete requests
Update reset path in preparation for engine reset which requires
identification of incomplete requests and associated context and fixing
their state so that engine can resume correctly after reset.

The request that caused the hang will be skipped and head is reset to the
start of breadcrumb. This allows us to resume from where we left-off.
Since this request didn't complete normally we also need to cleanup elsp
queue manually. This is vital if we employ nonblocking request
submission where we may have a web of dependencies upon the hung request
and so advancing the seqno manually is no longer trivial.

ABI: gem_reset_stats / DRM_IOCTL_I915_GET_RESET_STATS

We change the way we count pending batches. Only the active context
involved in the reset is marked as either innocent or guilty, and not
mark the entire world as pending. By inspection this only affects
igt/gem_reset_stats (which assumes implementation details) and not
piglit.

ARB_robustness gives this guide on how we expect the user of this
interface to behave:

 * Provide a mechanism for an OpenGL application to learn about
   graphics resets that affect the context.  When a graphics reset
   occurs, the OpenGL context becomes unusable and the application
   must create a new context to continue operation. Detecting a
   graphics reset happens through an inexpensive query.

And with regards to the actual meaning of the reset values:

   Certain events can result in a reset of the GL context. Such a reset
   causes all context state to be lost. Recovery from such events
   requires recreation of all objects in the affected context. The
   current status of the graphics reset state is returned by

	enum GetGraphicsResetStatusARB();

   The symbolic constant returned indicates if the GL context has been
   in a reset state at any point since the last call to
   GetGraphicsResetStatusARB. NO_ERROR indicates that the GL context
   has not been in a reset state since the last call.
   GUILTY_CONTEXT_RESET_ARB indicates that a reset has been detected
   that is attributable to the current GL context.
   INNOCENT_CONTEXT_RESET_ARB indicates a reset has been detected that
   is not attributable to the current GL context.
   UNKNOWN_CONTEXT_RESET_ARB indicates a detected graphics reset whose
   cause is unknown.

The language here is explicit in that we must mark up the guilty batch,
but is loose enough for us to relax the innocent (i.e. pending)
accounting as only the active batches are involved with the reset.

In the future, we are looking towards single engine resetting (with
minimal locking), where it seems inappropriate to mark the entire world
as innocent since the reset occurred on a different engine. Reducing the
information available means we only have to encounter the pain once, and
also reduces the information leaking from one context to another.

v2: Legacy ringbuffer submission required a reset following hibernation,
or else we restore stale values to the RING_HEAD and walked over
stolen garbage.

v3: GuC requires replaying the requests after a reset.

v4: Restore engine IRQ after reset (so waiters will be woken!)
    Rearm hangcheck if resetting with a waiter.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-13-chris@chris-wilson.co.uk
2016-09-09 14:23:05 +01:00
Chris Wilson 780f262a70 drm/i915: Replace wait-on-mutex with wait-on-bit in reset worker
Since we have a cooperative mode now with a direct reset, we can avoid
the contention on struct_mutex and instead try then sleep on the
I915_RESET_IN_PROGRESS bit. If the mutex is held and that bit is
cleared, all is fine. Otherwise, we sleep for a bit and try again. In
the worst case we sleep for an extra second waiting for the mutex to be
released (no one touching the GPU is allowed the struct_mutex whilst the
I915_RESET_IN_PROGRESS bit is set). But when we have a direct reset,
this allows us to clean up the reset worker faster.

v2: Remember to call wake_up_bit() after changing (for the faster wakeup
as promised)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-12-chris@chris-wilson.co.uk
2016-09-09 14:23:04 +01:00
Chris Wilson 221fe79945 drm/i915: Perform a direct reset of the GPU from the waiter
If a waiter is holding the struct_mutex, then the reset worker cannot
reset the GPU until the waiter returns. We do not want to return -EAGAIN
form i915_wait_request as that breaks delicate operations like
i915_vma_unbind() which often cannot be restarted easily, and returning
-EIO is just as useless (and has in the past proven dangerous). The
remaining WARN_ON(i915_wait_request) serve as a valuable reminder that
handling errors from an indefinite wait are tricky.

We can keep the current semantic that knowing after a reset is complete,
so is the request, by performing the reset ourselves if we hold the
mutex.

uevent emission is still handled by the reset worker, so it may appear
slightly out of order with respect to the actual reset (and concurrent
use of the device).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-11-chris@chris-wilson.co.uk
2016-09-09 14:23:04 +01:00
Chris Wilson 8af29b0c78 drm/i915: Separate out reset flags from the reset counter
In preparation for introducing a per-engine reset, we can first separate
the mixing of the reset state from the global reset counter.

The loss of atomicity in updating the reset state poses a small problem
for handling the waiters. For requests, this is solved by advancing the
seqno so that a waiter waking up after the reset knows the request is
complete. For pending flips, we still rely on the increment of the
global reset epoch (as well as the reset-in-progress flag) to signify
when the hardware was reset.

The advantage, now that we do not inspect the reset state during reset
itself i.e. we no longer emit requests during reset, is that we can use
the atomic updates of the state flags to ensure that only one reset
worker is active.

v2: Mika spotted that I transformed the i915_gem_wait_for_error() wakeup
into a waiter wakeup.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470414607-32453-6-git-send-email-arun.siluvery@linux.intel.com
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-7-chris@chris-wilson.co.uk
2016-09-09 14:23:02 +01:00
Imre Deak 57ec171eae drm/i915: sseu: Convert subslice count fields to subslice mask
In an upcoming patch we'll need the actual mask of subslices in addition
to their count, so convert the subslice_per_slice field to a mask.
Also we can easily calculate subslice_total from the other fields, so
instead of storing a cached version of this, add a helper to calculate
it.

v2:
- Use hweight8() on u8 typed vars instead of hweight32(). (Ben)

Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1)
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
2016-09-02 18:17:47 +03:00
Imre Deak 43b6799814 drm/i915: sseu: Use sseu_dev_info in device info
Move all slice/subslice/eu related properties to the sseu_dev_info
struct.

No functional change.

v2:
- s/info/sseu/ based on the new struct name. (Ben)

Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1)
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
2016-09-02 18:16:31 +03:00
David Weinehall 1616247002 drm/i915: Cleanup i915_param()
Rather than having a separate case for each value where we just return
a hardcoded value = 1, we lump them all together and rely on the awesome
case-fallthrough feature of C.

Fix all feature macros to pass dev_priv instead of dev while at it,
and use INTEL_GEN() instead of INTEL_INFO()->gen.

Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160902104617.29089-1-david.weinehall@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-09-02 12:28:33 +01:00
Chris Wilson 4cc6907501 drm/i915: Add I915_PARAM_MMAP_GTT_VERSION to advertise unlimited mmaps
Now that we have working partial VMA and faulting support for all
objects, including fence support, advertise to userspace that it can
take advantage of unlimited GGTT mmaps.

v2: Make room in the kerneldoc for a more detailed explanation of the
limitations of the GTT mmap interface.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160825180519.11341-1-chris@chris-wilson.co.uk
2016-08-26 08:42:26 +01:00
Chris Wilson bc5ca47c0a drm/i915: Restore lost "Initialized i915" welcome message
A side effect of removing the midlayer from driver loading was the loss
of a useful message announcing to userspace that i915 had successfully
started, e.g.:

	[drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0

Reported-by: Timo Aaltonen <tjaalton@ubuntu.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 8f460e2c78 ("drm/i915: Demidlayer driver loading")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Link: http://patchwork.freedesktop.org/patch/msgid/20160825072314.17402-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-08-25 09:28:56 +01:00
Chris Wilson abc80abde5 drm/i915: Force RC6 restore after system resume and reset
In order for the RC6 autoenable worker to take any action, RC6 first
must be disabled. Upon resume or reset, the sw state may be stale and so
we require a forced restore.

Fixes: b7137e0cf1 ("drm/i915: Defer enabling rc6 til after we submit...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160824092701.19178-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
2016-08-24 19:39:28 +01:00
David Weinehall 36cdd0138b drm/i915: debugfs spring cleaning
Just like with sysfs, we do some major overhaul.

Pass dev_priv instead of dev to all feature macros (IS_, HAS_,
INTEL_, etc.). This has the side effect that a bunch of functions
now get dev_priv passed instead of dev.

All calls to INTEL_INFO()->gen have been replaced with
INTEL_GEN().

We want access to to_i915(node->minor->dev) in a lot of places,
so add the node_to_i915() helper to accommodate for this.

Finally, we have quite a few cases where we get a void * pointer,
and need to cast it to drm_device *, only to run to_i915() on it.
Add cast_to_i915() to do this.

v2: Don't introduce extra dev (Chris)

v3: Make pipe_crc_info have a pointer to drm_i915_private instead of
    drm_device. This saves a bit of space, since we never use
    drm_device anywhere in these functions.

    Also some minor fixup that I missed in the previous version.

v4: Changed the code a bit so that dev_priv is passed directly
    to various functions, thus removing the need for the
    cast_to_i915() helper. Also did some additional cleanup.

v5: Additional cleanup of newly introduced changes.

v6: Rebase again because of conflict.

Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160822105931.pcbe2lpsgzckzboa@boom
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-08-22 12:19:52 +01:00
David Weinehall 52a05c302b drm/i915: pdev cleanup
In an effort to simplify things for a future push of dev_priv instead
of dev wherever possible, always take pdev via dev_priv where
feasible, eliminating the direct access from dev. Right now this
only eliminates a few cases of dev, but it also obviates that we pass
dev into a lot of functions where dev_priv would be the more obvious
choice.

v2: Fixed one more place missing in the previous patch set

Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160822103245.24069-5-david.weinehall@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-08-22 12:19:52 +01:00
David Weinehall 694c282845 drm/i915: i915_sysfs.c cleanup
Various cleanup for i915_sysfs.c; we now use dev_priv whenever
possible. The kdev_to_drm_minor() helper function has been
replaced by one that converts from struct device *
to struct drm_i915_private *.

We already have a seemingly identical helper (kdev_to_i915())
in i915_drv.h. But that one cannot be used here.
Unlike the version in i915_drv.h, this helper
reaches i915 through drm_minor.

v2: Rename kdev_to_i915_dm() to kdev_minor_to_i915() (Chris)

Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160822103245.24069-4-david.weinehall@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-08-22 12:19:52 +01:00
David Weinehall c49d13ee13 drm/i915: consistent struct device naming
We currently have a mix of struct device *device, struct device *kdev,
and struct device *dev (the latter forcing us to refer to
struct drm_device as something else than the normal dev).

To simplify things, always use kdev when referring to struct device.

v2: Replace the dev_to_drm_minor() macro with the inline function
    kdev_to_drm_minor().

Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160822103245.24069-3-david.weinehall@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-08-22 12:19:52 +01:00
Daniel Vetter cc9263874b Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued
Backmerge because too many conflicts, and also we need to get at the
latest struct fence patches from Gustavo. Requested by Chris Wilson.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-08-15 10:41:47 +02:00
Dave Airlie fc93ff608b Merge tag 'drm-intel-next-2016-08-08' of git://anongit.freedesktop.org/drm-intel into drm-next
- refactor ddi buffer programming a bit (Ville)
- large-scale renaming to untangle naming in the gem code (Chris)
- rework vma/active tracking for accurately reaping idle mappings of shared
  objects (Chris)
- misc dp sst/mst probing corner case fixes (Ville)
- tons of cleanup&tunings all around in gem
- lockless (rcu-protected) request lookup, plus use it everywhere for
  non(b)locking waits (Chris)
- pipe crc debugfs fixes (Rodrigo)
- random fixes all over

* tag 'drm-intel-next-2016-08-08' of git://anongit.freedesktop.org/drm-intel: (222 commits)
  drm/i915: Update DRIVER_DATE to 20160808
  drm/i915: fix aliasing_ppgtt leak
  drm/i915: Update comment before i915_spin_request
  drm/i915: Use drm official vblank_no_hw_counter callback.
  drm/i915: Fix copy_to_user usage for pipe_crc
  Revert "drm/i915: Track active streams also for DP SST"
  drm/i915: fix WaInsertDummyPushConstPs
  drm/i915: Assert that the request hasn't been retired
  drm/i915: Repack fence tiling mode and stride into a single integer
  drm/i915: Document and reject invalid tiling modes
  drm/i915: Remove locking for get_tiling
  drm/i915: Remove pinned check from madvise ioctl
  drm/i915: Reduce locking inside swfinish ioctl
  drm/i915: Remove (struct_mutex) locking for busy-ioctl
  drm/i915: Remove (struct_mutex) locking for wait-ioctl
  drm/i915: Do a nonblocking wait first in pread/pwrite
  drm/i915: Remove unused no-shrinker-steal
  drm/i915: Tidy generation of the GTT mmap offset
  drm/i915/shrinker: Wait before acquiring struct_mutex under oom
  drm/i915: Simplify do_idling() (Ironlake vt-d w/a)
  ...
2016-08-15 16:53:57 +10:00
Chris Wilson 0b1de5d58e drm/i915: Use SSE4.1 movntdqa to accelerate reads from WC memory
This patch provides the infrastructure for performing a 16-byte aligned
read from WC memory using non-temporal instructions introduced with sse4.1.
Using movntdqa we can bypass the CPU caches and read directly from memory
and ignoring the page attributes set on the CPU PTE i.e. negating the
impact of an otherwise UC access. Copying using movntdqa from WC is almost
as fast as reading from WB memory, modulo the possibility of both hitting
the CPU cache or leaving the data in the CPU cache for the next consumer.
(The CPU cache itself my be flushed for the region of the movntdqa and on
later access the movntdqa reads from a separate internal buffer for the
cacheline.) The write back to the memory is however cached.

This will be used in later patches to accelerate accessing WC memory.

v2: Report whether the accelerated copy is successful/possible.
v3: Function alignment override was only necessary when using the
function target("sse4.1") - which is not necessary for emitting movntdqa
from __asm__.
v4: Improve notes on CPU cache behaviour vs non-temporal stores.
v5: Fix byte offsets for unrolled moves.
v6: Find all remaining typos of "movntqda", use kernel_fpu_begin.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Akash Goel <akash.goel@intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471001999-17787-2-git-send-email-chris@chris-wilson.co.uk
2016-08-12 13:06:37 +01:00
Daniel Vetter 44adece57e drm/fb-helper: Add a dummy remove_conflicting_framebuffers
Lots of drivers don't properly compile without this when CONFIG_FB=n.
It's kinda a hack, but since CONFIG_FB doesn't stub any fucntions when
it's disabled I think it makes sense to add it to drm_fb_helper.h.

Long term we probably need to rethink all the logic to unload firmware
framebuffer drivers, at least if we want to be able to move away from
CONFIG_FB and fbcon.

v2: Unfortunately just stubbing out remove_conflicting_framebuffers in
drm_fb_helper.h upset gcc about static vs. non-static declarations, so
a new wrapper it needs to be. Means more churn :(

Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: tomi.valkeinen@ti.com
Cc: dh.herrmann@gmail.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-2-git-send-email-daniel.vetter@ffwll.ch
2016-08-12 10:41:18 +02:00
Imre Deak 8090ba8c21 drm/i915: Apply the PPS register unlock workaround more consistently
Atm, we apply this workaround somewhat inconsistently at the following
points: driver loading, LVDS init, eDP PPS init, system resume. As this
workaround also affects registers other than PPS (timing, PLL) a more
consistent way is to apply it early after the PPS HW context is known to
be lost: driver loading, system resume and on VLV/CHV/BXT when turning
on power domains.

This is needed by the next patch that removes saving/restoring of the
PP_CONTROL register.

This also removes the incorrect programming of the workaround on HSW+
PCH platforms which don't have the register locking mechanism.

v2: (Ville)
- Don't apply the workaround on BXT.
- Simplify platform checks using HAS_DDI().
v3:
- Move the call of intel_pps_unlock_regs_wa() to the more
  logical vlv_display_power_well_init() (also fixing CHV) (Ville).

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470827254-21954-5-git-send-email-imre.deak@intel.com
2016-08-10 16:01:42 +03:00
Chris Wilson b1f788c6ac drm/i915: Release vma when the handle is closed
In order to prevent a leak of the vma on shared objects, we need to
hook into the object_close callback to destroy the vma on the object for
this file. However, if we destroyed that vma immediately we may cause
unexpected application stalls as we try to unbind a busy vma - hence we
defer the unbind to when we retire the vma.

v2: Keep vma allocated until closed. This is useful for a later
optimisation, but it is required now in order to handle potential
recursion of i915_vma_unbind() by retiring itself.
v3: Comments are important.

Testcase: igt/gem_ppggtt/flink-and-close-vma-leak
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-26-git-send-email-chris@chris-wilson.co.uk
2016-08-04 08:09:33 +01:00
Chris Wilson f6b9d5cabd drm/i915: Split early global GTT initialisation
Initialising the global GTT is tricky as we wish to use the drm_mm range
manager during the modesetting initialisation (to capture stolen
allocations from the BIOS) before we actually enable GEM. To overcome
this, we currently setup the drm_mm first and then carefully rebind
them.

v2: Fixup after rebasing
v3: GGTT initialisation needs to be split around kicking out conflicts
v4: Restore an old UMS BUG_ON(mappable > total) as a DRM_ERROR plus
fixup of probe results.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-4-git-send-email-chris@chris-wilson.co.uk
2016-08-04 08:09:15 +01:00
Chris Wilson 97d6d7ab68 drm/i915: Update GGTT initialisation functions to take drm_i915_private
Since these are internal functions they operate on drm_i915_private and
not the drm_device being passed in. So pass in the drm_i915_private
instead, and remove one layer of dancing. No space wins here, just
conforming to the norm in function parameters.

v2: Include all the probe functions

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-3-git-send-email-chris@chris-wilson.co.uk
2016-08-04 08:09:14 +01:00
Chris Wilson 0088e522dd drm/i915: Split GGTT initialisation between probing and setup
In order to handle conflicting drivers (i.e. vgacon) having a different
setup of hardware, we have to remove those other drivers before we try
to setup our own mappings. This requires us to split GGTT initialisation
between probing for the hardware location (part of the PCI BAR) and
later establishing the kernel resources for it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-2-git-send-email-chris@chris-wilson.co.uk
2016-08-04 08:09:13 +01:00
Chris Wilson 54b4f68f18 Revert "drm/i915: Enable RC6 immediately"
This reverts commit b12e0ee208 ("drm/i915: Enable RC6 immediately"),
as it was never meant to be sent anywhere other than the bug report for
experimentation.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1469132179-4052-1-git-send-email-chris@chris-wilson.co.uk
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-07-21 21:43:19 +01:00
Chris Wilson b12e0ee208 drm/i915: Enable RC6 immediately
Now that PCU communication is reasonably fast, we do not need to defer
RC6 initialisation to a workqueue.

References: https://bugs.freedesktop.org/show_bug.cgi?id=97017
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-07-21 18:30:22 +01:00
Chris Wilson 39df91905d drm/i915: Convert i915_semaphores_is_enabled over to early sanitize
Rather than recomputing whether semaphores are enabled, we can do that
computation once during early initialisation as the i915.semaphores
module parameter is now read-only.

s/i915_semaphores_is_enabled/i915.semaphores/

v2: Add the state to the debug dmesg as well

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1469005202-9659-10-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469017917-15134-9-git-send-email-chris@chris-wilson.co.uk
2016-07-20 13:40:43 +01:00
Lyude 84c8e0963d drm/i915: Enable polling when we don't have hpd
Unfortunately, there's two situations where we lose hpd right now:
- Runtime suspend
- When we've shut off all of the power wells on Valleyview/Cherryview

While it would be nice if this didn't cause issues, this has the
ability to get us in some awkward states where a user won't be able to
get their display to turn on. For instance; if we boot a Valleyview
system without any monitors connected, it won't need any of it's power
wells and thus shut them off. Since this causes us to lose HPD, this
means that unless the user knows how to ssh into their machine and do a
manual reprobe for monitors, none of the monitors they connect after
booting will actually work.

Eventually we should come up with a better fix then having to enable
polling for this, since this makes rpm a lot less useful, but for now
the infrastructure in i915 just isn't there yet to get hpd in these
situations.

Changes since v1:
 - Add comment explaining the addition of the if
   (!mode_config->poll_running) in intel_hpd_init()
 - Remove unneeded if (!dev->mode_config.poll_enabled) in
   i915_hpd_poll_init_work()
 - Call to drm_helper_hpd_irq_event() after we disable polling
 - Add cancel_work_sync() call to intel_hpd_cancel_work()

Changes since v2:
 - Apparently dev->mode_config.poll_running doesn't actually reflect
   whether or not a poll is currently in progress, and is actually used
   for dynamic module paramter enabling/disabling. So now we instead
   keep track of our own poll_running variable in dev_priv->hotplug
 - Clean i915_hpd_poll_init_work() a little bit

Changes since v3:
 - Remove the now-redundant connector loop in intel_hpd_init(), just
   rely on intel_hpd_poll_enable() for setting connector->polled
   correctly on each connector
 - Get rid of poll_running
 - Don't assign enabled in i915_hpd_poll_init_work before we actually
   lock dev->mode_config.mutex
 - Wrap enabled assignment in i915_hpd_poll_init_work() in READ_ONCE()
   for doc purposes
 - Do the same for dev_priv->hotplug.poll_enabled with WRITE_ONCE in
   intel_hpd_poll_enable()
 - Add some comments about racing not mattering in intel_hpd_poll_enable

Changes since v4:
 - Rename intel_hpd_poll_enable() to intel_hpd_poll_init()
 - Drop the bool argument from intel_hpd_poll_init()
 - Remove redundant calls to intel_hpd_poll_init()
 - Rename poll_enable_work to poll_init_work
 - Add some kerneldoc for intel_hpd_poll_init()
 - Cross-reference intel_hpd_poll_init() in intel_hpd_init()
 - Just copy the loop from intel_hpd_init() in intel_hpd_poll_init()

Changes since v5:
 - Minor kerneldoc nitpicks

Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 19625e85c6)
2016-07-19 09:17:25 +02:00
Chris Wilson 5ab57c7020 drm/i915: Flush logical context image out to memory upon suspend
Before suspend, and especially before building the hibernation image, we
need to context image to be coherent in memory. To do this we require
that we perform a context switch to a disposable context (i.e. the
dev_priv->kernel_context) - when that switch is complete, all other
context images will be complete. This leaves the kernel_context image as
incomplete, but fortunately that is disposable and we can do a quick
fixup of the logical state after resuming.

v2: Share the nearly identical code to switch to the kernel context with
eviction.
v3: Explain why we need the switch and reset.

Testcase: igt/gem_exec_suspend # bsw
References: https://bugs.freedesktop.org/show_bug.cgi?id=96526
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468590980-6186-2-git-send-email-chris@chris-wilson.co.uk
2016-07-15 20:41:05 +01:00
Lyude 19625e85c6 drm/i915: Enable polling when we don't have hpd
Unfortunately, there's two situations where we lose hpd right now:
- Runtime suspend
- When we've shut off all of the power wells on Valleyview/Cherryview

While it would be nice if this didn't cause issues, this has the
ability to get us in some awkward states where a user won't be able to
get their display to turn on. For instance; if we boot a Valleyview
system without any monitors connected, it won't need any of it's power
wells and thus shut them off. Since this causes us to lose HPD, this
means that unless the user knows how to ssh into their machine and do a
manual reprobe for monitors, none of the monitors they connect after
booting will actually work.

Eventually we should come up with a better fix then having to enable
polling for this, since this makes rpm a lot less useful, but for now
the infrastructure in i915 just isn't there yet to get hpd in these
situations.

Changes since v1:
 - Add comment explaining the addition of the if
   (!mode_config->poll_running) in intel_hpd_init()
 - Remove unneeded if (!dev->mode_config.poll_enabled) in
   i915_hpd_poll_init_work()
 - Call to drm_helper_hpd_irq_event() after we disable polling
 - Add cancel_work_sync() call to intel_hpd_cancel_work()

Changes since v2:
 - Apparently dev->mode_config.poll_running doesn't actually reflect
   whether or not a poll is currently in progress, and is actually used
   for dynamic module paramter enabling/disabling. So now we instead
   keep track of our own poll_running variable in dev_priv->hotplug
 - Clean i915_hpd_poll_init_work() a little bit

Changes since v3:
 - Remove the now-redundant connector loop in intel_hpd_init(), just
   rely on intel_hpd_poll_enable() for setting connector->polled
   correctly on each connector
 - Get rid of poll_running
 - Don't assign enabled in i915_hpd_poll_init_work before we actually
   lock dev->mode_config.mutex
 - Wrap enabled assignment in i915_hpd_poll_init_work() in READ_ONCE()
   for doc purposes
 - Do the same for dev_priv->hotplug.poll_enabled with WRITE_ONCE in
   intel_hpd_poll_enable()
 - Add some comments about racing not mattering in intel_hpd_poll_enable

Changes since v4:
 - Rename intel_hpd_poll_enable() to intel_hpd_poll_init()
 - Drop the bool argument from intel_hpd_poll_init()
 - Remove redundant calls to intel_hpd_poll_init()
 - Rename poll_enable_work to poll_init_work
 - Add some kerneldoc for intel_hpd_poll_init()
 - Cross-reference intel_hpd_poll_init() in intel_hpd_init()
 - Just copy the loop from intel_hpd_init() in intel_hpd_poll_init()

Changes since v5:
 - Minor kerneldoc nitpicks

Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-07-14 22:06:11 +02:00
Chris Wilson b7137e0cf1 drm/i915: Defer enabling rc6 til after we submit the first batch/context
Some hardware requires a valid render context before it can initiate
rc6 power gating of the GPU; the default state of the GPU is not
sufficient and may lead to undefined behaviour. The first execution of
any batch will load the "golden render state", at which point it is safe
to enable rc6. As we do not forcibly load the kernel context at resume,
we have to hook into the batch submission to be sure that the render
state is setup before enabling rc6.

However, since we don't enable powersaving until that first batch, we
queued a delayed task in order to guarantee that the batch is indeed
submitted.

v2: Rearrange intel_disable_gt_powersave() to match.
v3: Apply user specified cur_freq (or idle_freq if not set).
v4: Give in, and supply a delayed work to autoenable rc6
v5: Mika suggested a couple of better names for delayed_resume_work
v6: Rebalance rpm_put around the autoenable task

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468397438-21226-7-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
2016-07-14 15:24:21 +01:00
Rodrigo Vivi 22dea0be50 drm/i915: Introduce Kabypoint PCH for Kabylake H/DT.
Some Kabylake SKUs are going to use Kabypoint PCH.
It is mainly for Halo and DT ones.

>From our specs it doesn't seem that KBP brings
any change on the display south engine. So let's consider
this as a continuation of SunrisePoint, i.e., SPT+.

Since it is easy to get confused by a letter change:
KBL = Kabylake - CPU/GPU codename.
KBP = Kabypoint - PCH codename.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96826
Link: http://patchwork.freedesktop.org/patch/msgid/1467418032-15167-1-git-send-email-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2016-07-07 10:01:37 -07:00
Chris Wilson 91c8a326a1 drm/i915: Convert dev_priv->dev backpointers to dev_priv->drm
Since drm_i915_private is now a subclass of drm_device we do not need to
chase the drm_i915_private->dev backpointer and can instead simply
access drm_i915_private->drm directly.

   text	   data	    bss	    dec	    hex	filename
1068757	   4565	    416	1073738	 10624a	drivers/gpu/drm/i915/i915.ko
1066949	   4565	    416	1071930	 105b3a	drivers/gpu/drm/i915/i915.ko

Created by the coccinelle script:
@@
struct drm_i915_private *d;
identifier i;
@@
(
- d->dev->i
+ d->drm.i
|
- d->dev
+ &d->drm
)

and for good measure the dev_priv->dev backpointer was removed entirely.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467711623-2905-4-git-send-email-chris@chris-wilson.co.uk
2016-07-05 11:58:45 +01:00
Chris Wilson ded8b07d4c drm/i915: Remove impossible tests for dev->dev_private
If we have a drm_device, we have a drm_i915_private (since they are the
same).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467711623-2905-3-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
2016-07-05 11:53:50 +01:00
Chris Wilson fb93942033 drm/i915: Remove use of dev_priv->dev backpointer in __i915_printk()
As we can just directly use drm_dev->drm.dev, we do not need the
drm_dev->dev backpointer anymore and can also loose the warning about
order of __i915_printk() and our initialisation (which is now always
safe).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467711623-2905-2-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
2016-07-05 11:53:47 +01:00
Chris Wilson 94b4f3ba48 drm/i915: Split out runtime configuration of device info to its own file
Let's reclaim a few hundred lines from i915_drv.c by splitting out the
runtime configuration of the "constant" dev_priv->info.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1467711623-2905-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
2016-07-05 11:53:27 +01:00
Chris Wilson fac5e23e3c drm/i915: Mass convert dev->dev_private to to_i915(dev)
Since we now subclass struct drm_device, we can save pointer dances by
noting the equivalence of struct drm_device and struct drm_i915_private,
i.e. by using to_i915().

   text    data     bss     dec     hex filename
1073824    4562     416 1078802  107612 drivers/gpu/drm/i915/i915.ko
1068976    4562     416 1073954  106322 drivers/gpu/drm/i915/i915.ko

Created by the coccinelle script:

@@
expression E;
identifier p;
@@
- struct drm_i915_private *p = E->dev_private;
+ struct drm_i915_private *p = to_i915(E);

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467628477-25379-1-git-send-email-chris@chris-wilson.co.uk
2016-07-04 12:54:07 +01:00
Chris Wilson 7b4d3a16dd drm/i915: Remove stop-rings debugfs interface
Now that we have (near) universal GPU recovery code, we can inject a
real hang from userspace and not need any fakery. Not only does this
mean that the testing is far more realistic, but we can simplify the
kernel in the process.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467616119-4093-7-git-send-email-chris@chris-wilson.co.uk
2016-07-04 08:18:23 +01:00
Chris Wilson c33d247d0e drm/i915: Flush the RPS bottom-half when the GPU idles
Make sure that the RPS bottom-half is flushed before we set the idle
frequency when we decide the GPU is idle. This should prevent any races
with the bottom-half and setting the idle frequency, and ensures that
the bottom-half is bounded by the GPU's rpm reference taken for when it
is active (i.e. between gen6_rps_busy() and gen6_rps_idle()).

v2: Avoid recursively using the i915->wq - RPS does not touch the
struct_mutex so has no place being on the ordered i915->wq.
v3: Enable/disable interrupts for RPS busy/idle in order to prevent
further HW access from RPS outside of the wakeref.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
References: https://bugs.freedesktop.org/show_bug.cgi?id=89728
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467616119-4093-6-git-send-email-chris@chris-wilson.co.uk
2016-07-04 08:18:23 +01:00
Chris Wilson 67d97da349 drm/i915: Only start retire worker when idle
The retire worker is a low frequency task that makes sure we retire
outstanding requests if userspace is being lax. We only need to start it
once as it remains active until the GPU is idle, so do a cheap test
before the more expensive queue_work(). A consequence of this is that we
need correct locking in the worker to make the hot path of request
submission cheap. To keep the symmetry and keep hangcheck strictly bound
by the GPU's wakelock, we move the cancel_sync(hangcheck) to the idle
worker before dropping the wakelock.

v2: Guard against RCU fouling the breadcrumbs bottom-half whilst we kick
the waiter.
v3: Remove the wakeref assertion squelching (now we hold a wakeref for
the hangcheck, any rpm error there is genuine).
v4: To prevent excess work when retiring requests, we split the busy
flag into two, a boolean to denote whether we hold the wakeref and a
bitmask of active engines.
v5: Reorder cancelling hangcheck upon idling to avoid a race where we
might cancel a hangcheck after being preempted by a new task

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
References: https://bugs.freedesktop.org/show_bug.cgi?id=88437
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467616119-4093-1-git-send-email-chris@chris-wilson.co.uk
2016-07-04 08:18:19 +01:00
Chris Wilson 338d0eeaa9 drm/i915: Fix random indent in i915_drm_resume()
smatch complains:

	drivers/gpu/drm/i915/i915_drv.c:1616 i915_drm_resume() warn:
	inconsistent indenting

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1467470166-31717-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
2016-07-02 19:19:30 +01:00
Chris Wilson 7774002586 drm/i915: Remove the dedicated hangcheck workqueue
The queue only ever contains at most one item and has no special flags.
It is just a very simple wrapper around the system-wq - a complication
with no benefits.

v2: Use the system_long_wq as we may wish to capture the error state
after detecting the hang - which may take a bit of time.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467390209-3576-3-git-send-email-chris@chris-wilson.co.uk
2016-07-01 20:42:29 +01:00
arun.siluvery@linux.intel.com 37f501afed drm/i915/bxt: Export pooled eu info to userspace
Pooled EU is a bxt only feature and kernel changes are already merged. This
feature is not yet exposed to userspace as the support was not yet
available. Beignet team expressed interest and added patches to use this.

Since we now have a user and patches to use them, expose them from the
kernel side as well.

v2: fix compile error

[1] https://lists.freedesktop.org/archives/beignet/2016-June/007698.html
[2] https://lists.freedesktop.org/archives/beignet/2016-June/007699.html

Cc: Winiarski, Michal <michal.winiarski@intel.com>
Cc: Zou, Nanhai <nanhai.zou@intel.com>
Cc: Yang, Rong R <rong.r.yang@intel.com>
Cc: Tim Gore <tim.gore@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467369782-25992-1-git-send-email-arun.siluvery@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
2016-07-01 14:53:52 +01:00
Chris Wilson 41ce405e68 drm/i915: Convert wait_for(I915_READ(reg)) to intel_wait_for_register()
By using the out-of-line intel_wait_for_register() not only do we can
efficiency from using the hybrid wait_for() contained within, but we
avoid code bloat from the numerous inlined loops, in total (all patches):

   text    data     bss     dec     hex filename
1078551    4557     416 1083524  108884 drivers/gpu/drm/i915/i915.ko
1070775    4557     416 1075748  106a24 drivers/gpu/drm/i915/i915.ko

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467297225-21379-5-git-send-email-chris@chris-wilson.co.uk
2016-06-30 15:42:01 +01:00
Chris Wilson b273669588 drm/i915: Convert wait_for(I915_READ(reg)) to intel_wait_for_register()
By using the out-of-line intel_wait_for_register() not only do we can
efficiency from using the hybrid wait_for() contained within, but we
avoid code bloat from the numerous inlined loops, in total (all patches):

   text    data     bss     dec     hex filename
1078551    4557     416 1083524  108884 drivers/gpu/drm/i915/i915.ko
1070775    4557     416 1075748  106a24 drivers/gpu/drm/i915/i915.ko

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467297225-21379-4-git-send-email-chris@chris-wilson.co.uk
2016-06-30 15:42:00 +01:00
Chris Wilson c6ddc5f3d0 drm/i915: Convert wait_for(I915_READ(reg)) to intel_wait_for_register()
By using the out-of-line intel_wait_for_register() not only do we can
efficiency from using the hybrid wait_for() contained within, but we
avoid code bloat from the numerous inlined loops, in total (all patches):

   text    data     bss     dec     hex filename
1078551    4557     416 1083524  108884 drivers/gpu/drm/i915/i915.ko
1070775    4557     416 1075748  106a24 drivers/gpu/drm/i915/i915.ko

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467297225-21379-3-git-send-email-chris@chris-wilson.co.uk
2016-06-30 15:41:59 +01:00
Chris Wilson a09d0ba174 drm/i915: Move module init/exit to i915_pci.c
The module init/exit routines are a wrapper around the PCI device
init/exit, so move them across.

Note that in order to avoid exporting the driver struct, instead of
manipulating driver.features inside i915_init we instead opt to simply
exit if i915.modeset is disabled.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466773227-7994-15-git-send-email-chris@chris-wilson.co.uk
2016-06-24 14:45:48 +01:00
Chris Wilson 42f5551d27 drm/i915: Split out the PCI driver interface to i915_pci.c
To reclaim a bit of space from i915_drv.c, we can move the routines that
just hook us into the PCI device tree into i915_pci.c

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466773227-7994-14-git-send-email-chris@chris-wilson.co.uk
2016-06-24 14:45:37 +01:00
Frank Binns c2dac8680e drm/i915: Fix misleading driver debug message
Stop claiming that UMS support is disabled when it's not actually
supported anymore.

Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1466763836-27772-1-git-send-email-frank.binns@imgtec.com
Link: http://patchwork.freedesktop.org/patch/msgid/1466773227-7994-13-git-send-email-chris@chris-wilson.co.uk
2016-06-24 14:45:22 +01:00
Chris Wilson dda330099a drm/i915: Remove user controllable DRM_ERROR for i915_getparam()
The GETPARAM ioctl writes to a user supplied address. If that address is
invalid, it is the user's error and not the driver's, so quietly report
EFAULT and don't blame ourselves with a DRM_ERROR.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466773227-7994-11-git-send-email-chris@chris-wilson.co.uk
2016-06-24 14:44:58 +01:00
Chris Wilson 0673ad472b drm/i915: Merge i915_dma.c into i915_drv.c
i915_dma.c used to contain the DRI1/UMS horror show, but now all that
remains are the out-of-place driver level interfaces (such as
allocating, initialising and registering the driver). These should be in
i915_drv.c alongside similar routines for suspend/resume.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466773227-7994-10-git-send-email-chris@chris-wilson.co.uk
2016-06-24 14:44:44 +01:00
Chris Wilson 3e783bac8a drm/i915: Demidlayer driver unloading
To complete the transition to manual control of load/unload, we need to
take over unloading from i915_pci_remove(). This allows us to correctly
order our unregister vs shutdown phases, which currently are inverted
due to the midlayer.

However, the unload sequence is still invalid as we shutdown the driver
with the last reference. Ideally, all we want to do is remove the
userspace access on device removal, deferring the cleanup to the
drm_dev_release() - breaking the reference cycles is then left as an
exercise for the reader.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466773227-7994-7-git-send-email-chris@chris-wilson.co.uk
2016-06-24 14:44:12 +01:00
Chris Wilson 8f460e2c78 drm/i915: Demidlayer driver loading
Take control over allocating, loading and registering the driver from the
DRM midlayer by performing it manually from i915_pci_probe. This allows
us to carefully control the order of when we setup the hardware vs when
it becomes visible to third parties (including userspace). The current
ordering makes the driver visible to userspace first (in order to
coordinate with removed DRI1 userspace), but that ordering incurs risk.
The risk increases as we strive for more asynchronous loading.

One side effect of controlling the allocation is that we can allocate
both the drm_device + drm_i915_private in one block, the next step
towards subclassing.

Unload is still left as before, a mix of midlayer and driver.

v2: After drm_dev_init(), we should call drm_dev_unref() so that we call
drm_dev_release() and free everything from drm_dev_init().
v3: Fixup missed error code for failing to allocate dev_priv

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466773227-7994-6-git-send-email-chris@chris-wilson.co.uk
2016-06-24 14:43:50 +01:00
Chris Wilson 1dac891c1c drm/i915: Register debugfs interface last
Currently debugfs files are created before the driver is even loads.
This gives the opportunity for userspace to open that interface and poke
around before the backing data structures are initialised - with the
possibility of oopsing or worse.

Move the creation of the debugfs files to our registration phase, where
we announce our presence to the world when we are ready, i.e the
sequence changes from

	drm_dev_register()
	 -> drm_minor_register()
	  -> drm_debugfs_init()
	   -> i915_debugfs_init()
	 -> i915_driver_load()

to

	drm_dev_register()
	 -> drm_minor_register()
	  -> drm_debugfs_init()
	 -> i915_driver_load()
	  -> i915_debugfs_register()

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466773227-7994-5-git-send-email-chris@chris-wilson.co.uk
2016-06-24 14:43:36 +01:00
arun.siluvery@linux.intel.com e015dd69b2 drm/i915/bxt: Add WaEnablePooledEuFor2x6
Pooled EU is enabled by default for BXT but for fused down 2x6 parts it is
advised to turn it off. But there is another HW issue in these parts (fused
down 2x6 parts) before C0 that requires Pooled EU to be enabled as a
workaround. In this case the pool configuration changes depending upon
which subslice is disabled. This doesn't affect if the device has all 3
subslices enabled.

Userspace need to know min no. of eus in a pool as it varies based on which
subslice is disabled, this is not yet exported because userspace support is
not available yet. Once the support is available this needs to be exported
using getparam ioctls.

v2: s/subslice_total/subslice_per_slice as it is a more logical field (Mika)

Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Winiarski, Michal <michal.winiarski@intel.com>
Cc: Zou, Nanhai <nanhai.zou@intel.com>
Cc: Yang, Rong R <rong.r.yang@intel.com>
Cc: Tim Gore <tim.gore@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-06-14 10:42:35 +01:00
arun.siluvery@linux.intel.com 33e141ed1c drm/i915:bxt: Enable Pooled EU support
This mode allows to assign EUs to pools which can process work collectively.
The command to enable this mode should be issued as part of context initialization.

The pooled mode is global, once enabled it has to stay the same across all
contexts until HW reset hence this is sent in auxiliary golden context batch.
Thanks to Mika for the preliminary review and comments.

v2: explain why this is enabled in golden context, use feature flag while
enabling the support (Chris)

v3: Include only kernel support as userspace support is not available yet.

User space clients need to know when the pooled EU feature is present
and enabled on the hardware so that they can adapt work submissions.
Create a new device info flag for this purpose.

Set has_pooled_eu to true in the Broxton static device info - Broxton
supports the feature in hardware and the driver will enable it by
default.

We need to add getparam ioctls to enable userspace to query availability of
this feature and to retrieve min. no of eus in a pool but we will expose
them once userspace support is available. Opensource users for this feature
are mesa, libva and beignet.

Beignet team is currently working on adding userspace support.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Cc: Winiarski, Michal <michal.winiarski@intel.com>
Cc: Zou, Nanhai <nanhai.zou@intel.com>
Cc: Yang, Rong R <rong.r.yang@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Armin Reese <armin.c.reese@intel.com>
Cc: Tim Gore <tim.gore@intel.com>
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-06-14 10:42:35 +01:00
Gerd Hoffmann 94bb489c89 drm/i915: use #defines for qemu subsystem ids
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465821536-21312-1-git-send-email-kraxel@redhat.com
2016-06-13 17:44:04 +03:00
Daniel Vetter 5599617ec0 Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued
Git got absolutely destroyed with all our cherry-picking from
drm-intel-next-queued to various branches. It ended up inserting
intel_crtc_page_flip 2x even in intel_display.c.

Backmerge to get back to sanity.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-06-02 09:54:12 +02:00
Dave Airlie 66fd7a66e8 Merge branch 'drm-intel-next' of git://anongit.freedesktop.org/drm-intel into drm-next
drm-intel-next-2016-05-22:
- cmd-parser support for direct reg->reg loads (Ken Graunke)
- better handle DP++ smart dongles (Ville)
- bxt guc fw loading support (Nick Hoathe)
- remove a bunch of struct typedefs from dpll code (Ander)
- tons of small work all over to avoid casting between drm_device and the i915
  dev struct (Tvrtko&Chris)
- untangle request retiring from other operations, also fixes reset stat corner
  cases (Chris)
- skl atomic watermark support from Matt Roper, yay!
- various wm handling bugfixes from Ville
- big pile of cdclck rework for bxt/skl (Ville)
- CABC (Content Adaptive Brigthness Control) for dsi panels (Jani&Deepak M)
- nonblocking atomic commits for plane-only updates (Maarten Lankhorst)
- bunch of PSR fixes&improvements
- untangle our map/pin/sg_iter code a bit (Dave Gordon)
drm-intel-next-2016-05-08:
- refactor stolen quirks to share code between early quirks and i915 (Joonas)
- refactor gem BO/vma funcstion (Tvrtko&Dave)
- backlight over DPCD support (Yetunde Abedisi)
- more dsi panel sequence support (Jani)
- lots of refactoring around handling iomaps, vma, ring access and related
  topics culmulating in removing the duplicated request tracking in the execlist
  code (Chris & Tvrtko) includes a small patch for core iomapping code
- hw state readout for bxt dsi (Ramalingam C)
- cdclk cleanups (Ville)
- dedupe chv pll code a bit (Ander)
- enable semaphores on gen8+ for legacy submission, to be able to have a direct
  comparison against execlist on the same platform (Chris) Not meant to be used
  for anything else but performance tuning
- lvds border bit hw state checker fix (Jani)
- rpm vs. shrinker/oom-notifier fixes (Praveen Paneri)
- l3 tuning (Imre)
- revert mst dp audio, it's totally non-functional and crash-y (Lyude)
- first official dmc for kbl (Rodrigo)
- and tons of small things all over as usual

* 'drm-intel-next' of git://anongit.freedesktop.org/drm-intel: (194 commits)
  drm/i915: Revert async unpin and nonblocking atomic commit
  drm/i915: Update DRIVER_DATE to 20160522
  drm/i915: Inline sg_next() for the optimised SGL iterator
  drm/i915: Introduce & use new lightweight SGL iterators
  drm/i915: optimise i915_gem_object_map() for small objects
  drm/i915: refactor i915_gem_object_pin_map()
  drm/i915/psr: Implement PSR2 w/a for gen9
  drm/i915/psr: Use ->get_aux_send_ctl functions
  drm/i915/psr: Order DP aux transactions correctly
  drm/i915/psr: Make idle_frames sensible again
  drm/i915/psr: Try to program link training times correctly
  drm/i915/userptr: Convert to drm_i915_private
  drm/i915: Allow nonblocking update of pageflips.
  drm/i915: Check for unpin correctness.
  Reapply "drm/i915: Avoid stalling on pending flips for legacy cursor updates"
  drm/i915: Make unpin async.
  drm/i915: Prepare connectors for nonblocking checks.
  drm/i915: Pass atomic states to fbc update functions.
  drm/i915: Remove reset_counter from intel_crtc.
  drm/i915: Remove queue_flip pointer.
  ...
2016-06-02 07:58:36 +10:00
Dave Airlie 65439b68bb Merge tag 'topic/drm-misc-2016-06-01' of git://anongit.freedesktop.org/drm-intel into drm-next
Frist -misc pull for 4.8, with pretty much just random all over plus a few
more lockless gem BO patches acked/reviewed by driver maintainers.

I'm starting a bit earlier this time around because there's a few invasive
patch series to land (nonblocking atomic prep work, fence prep work,
rst/sphinx kerneldoc finally happening) and I need a baseline with all the
branches merged.

* tag 'topic/drm-misc-2016-06-01' of git://anongit.freedesktop.org/drm-intel: (21 commits)
  drm/vc4: Use lockless gem BO free callback
  drm/vc4: Use drm_gem_object_unreference_unlocked
  drm: Initialize a linear gamma table by default
  drm/vgem: Use lockless gem BO free callback
  drm/qxl: Don't set a gamma table size
  drm/msm: Nuke dummy gamma_set/get functions
  drm/cirrus: Drop redundnant gamma size check
  drm/fb-helper: Remove dead code in setcolreg
  drm/mediatek: Use lockless gem BO free callback
  drm/hisilicon: Use lockless gem BO free callback
  drm/hlcd: Use lockless gem BO free callback
  vga_switcheroo: Support deferred probing of audio clients
  vga_switcheroo: Add helper for deferred probing
  virtio-gpu: fix output lookup
  drm/doc: Unify KMS Locking docs
  drm/atomic-helper: Do not call ->mode_fixup for CRTC which will be disabled
  Fix annoyingly awkward typo in drm_edid_load.c
  drm/doc: Drop vblank_disable_allow wording
  drm: use seqlock for vblank time/count
  drm/mm: avoid possible null pointer dereference
  ...
2016-06-02 07:50:23 +10:00
Lukas Wunner b00e5334ab vga_switcheroo: Add helper for deferred probing
So far we've got one condition when DRM drivers need to defer probing
on a dual GPU system and it's coded separately into each of the relevant
drivers. As suggested by Daniel Vetter, deduplicate that code in the
drivers and move it to a new vga_switcheroo helper. This yields better
encapsulation of concepts and lets us add further checks in a central
place. (The existing check pertains to pre-retina MacBook Pros and an
additional check is expected to be needed for retinas.)

One might be tempted to check deferred probing conditions in
vga_switcheroo_register_client(), but this is usually called fairly late
during driver load. The GPU is fully brought up and ready for switching
at that point. On boot the ->probe hook is potentially called dozens of
times until it finally succeeds, and each time we'd repeat bringup and
teardown of the GPU, lengthening boot time considerably and cluttering
logfiles. A separate helper is therefore needed which can be called
right at the beginning of the ->probe hook.

Note that amdgpu currently does not call this helper as the AMD GPUs
built into MacBook Pros are only supported by radeon so far.

v2: This helper could eventually be used by audio clients as well,
    so rephrase kerneldoc to refer to "client" instead of "GPU"
    and move the single existing check in an if block specific
    to PCI_CLASS_DISPLAY_VGA devices. Move documentation on
    that check from kerneldoc to a comment. (Daniel Vetter)

v3: Mandate in kerneldoc that registration of client shall only
    happen after calling this helper. (Daniel Vetter)

v4: Rebase on 412c8f7de0 ("drm/radeon: Return -EPROBE_DEFER when
    amdkfd not loaded")

v5: Some Optimus GPUs use PCI_CLASS_DISPLAY_3D, make sure those are
    matched as well. (Emil Velikov)

v6: The if-condition referring to PCI_BASE_CLASS_DISPLAY may be
    considered a functional change. Move to a separate commit to
    keep this a pure refactoring change. (Emil Velikov, Jani Nikula)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/575885fd440c2b13c3f19ddf44360cfbbff35f50.1464685538.git.lukas@wunner.de
2016-05-31 13:15:57 +02:00
Dave Airlie 7fa1d27b63 Merge tag 'drm-intel-next-fixes-2016-05-25' of git://anongit.freedesktop.org/drm-intel into drm-next
I see the main drm pull got merged, here's the first batch of fixes for
4.7 already. Fixes all around, a large portion cc: stable stuff.

[airlied: the DP++ stuff is a regression fix].
* tag 'drm-intel-next-fixes-2016-05-25' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Stop automatically retiring requests after a GPU hang
  drm/i915: Unify intel_ring_begin()
  drm/i915: Ignore stale wm register values on resume on ilk-bdw (v2)
  drm/i915/psr: Try to program link training times correctly
  drm/i915/bxt: Adjusting the error in horizontal timings retrieval
  drm/i915: Don't leave old junk in ilk active watermarks on readout
  drm/i915: s/DPPL/DPLL/ for SKL DPLLs
  drm/i915: Fix gen8 semaphores id for legacy mode
  drm/i915: Set crtc_state->lane_count for HDMI
  drm/i915/BXT: Retrieving the horizontal timing for DSI
  drm/i915: Protect gen7 irq_seqno_barrier with uncore lock
  drm/i915: Re-enable GGTT earlier during resume on pre-gen6 platforms
  drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT
  drm/i915: Enable/disable TMDS output buffers in DP++ adaptor as needed
  drm/i915: Respect DP++ adaptor TMDS clock limit
  drm: Add helper for DP++ adaptors
2016-05-27 16:08:38 +10:00
Chris Wilson 03d92e4779 drm/i915/opregion: Rename init/fini functions to register/unregister
Current intel_opregion_init is called during the driver registration
phase and intel_opregion_fini from the unregistration phase. Rename the
functions so that this is clear from their names. The phases tell us
what we expect the existing hw state to be, e.g. whether interrupts are
still enabled etc.

It should be noted that the opregion init/fini routines are asymmetric
and this is carried across into their new names. Indeed, their new names
make it even clearer that perhaps all is not well in the opregion
suspend/resume sequence (as well in the module unload).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464012490-30961-2-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
2016-05-23 16:35:50 +01:00
Chris Wilson 6f9f4b7a2c drm/i915/opregion: Convert to using native drm_i915_private
Prefer passing struct drm_i915_private to internal interfaces as this
saves us having to dance between drm_device and our native struct. The
savings hare are small (only 70 bytes of unrequired dancing), but
progressive!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464012490-30961-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
2016-05-23 16:35:21 +01:00
Ville Syrjälä 5fbd0418ee drm/i915: Re-enable GGTT earlier during resume on pre-gen6 platforms
Move the intel_enable_gtt() call to happen before we touch the GTT
during resume. Right now it's done way too late. Before
commit ebb7c78d35 ("agp/intel-gtt: Only register fake agp driver for gen1")
it was actually done earlier on account of also getting called from
the resume hook of the fake agp driver. With the fake agp driver
no longer getting registered we must move the call up.

The symptoms I've seen on my 830 machine include lowmem corruption,
other kinds of memory corruption, and straight up hung machine during
or just after resume. Not really sure what causes the memory corruption,
but so far I've not seen any with this fix.

I think we shouldn't really need to call this during init, but we have
been doing that so I've decided to keep the call. However moving that
call earlier could be prudent as well. Doing it right after the
intel-gtt probe seems appropriate.

Also tested this on 946gz,elk,ilk and all seemed quite happy with
this change.

v2: Reorder init_hw vs. enable_hw functions (Chris)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: ebb7c78d35 ("agp/intel-gtt: Only register fake agp driver for gen1")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1462559755-353-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit ac840ae535)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-23 11:10:48 +03:00
Daniel Vetter 9a652cc01e Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued
Backmerge request by Jani to get at

commit 249c4f538b
Author: Deepak M <m.deepak@intel.com>
Date:   Wed Mar 30 17:03:39 2016 +0300

    drm: Add new DCS commands in the enum list

Some simple conflicts in intel_dp.c.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-05-17 12:15:49 +02:00
Chris Wilson 461fb99c15 drm/i915: Update domain tracking for GEM objects on hibernation
When creating the hibernation image, the CPU will read the pages of all
objects and thus conflict with our domain tracking. We need to update
our domain tracking to accurately reflect the state on restoration.

v2: Perform the domain tracking inside freeze, before the image is
written, rather than upon restoration.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: David Weinehall <david.weinehall@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1463207195-22076-2-git-send-email-chris@chris-wilson.co.uk
2016-05-14 08:51:39 +01:00
Chris Wilson 1f19ac2a0b drm/i915: Add distinct stubs for PM hibernation phases
Currently for handling the extra hibernation phases we just call the
equivalent suspend/resume phases. In the next couple of patches, I wish
to specialise the hibernation phases to reduce the amount of work
required for handling GEM objects.

v2: There are more! Don't forget the freeze phases.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: David Weinehall <david.weinehall@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1463207195-22076-1-git-send-email-chris@chris-wilson.co.uk
2016-05-14 08:51:39 +01:00
Tvrtko Ursulin ab0d24ac38 drm/i915: Promote IS_BROADWELL to a simple macro
If we allow it a dedicated flag in dev_priv we enable the
compiler to nicely optimize conditions like IS_HASSWELL ||
IS_BROADWELL.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-05-11 12:27:27 +01:00
Chris Wilson dc97997a21 drm/i915: Use drm_i915_private as the native pointer for intel_uncore.c
Pass drm_i915_private to the uncore init/fini routines and their
subservients as it is their native type.

   text    data     bss     dec     hex filename
6309978 3578778  696320 10585076         a183f4 vmlinux
6309530 3578778  696320 10584628         a18234 vmlinux

a modest 400 bytes of saving, but 60 lines of code deleted!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1462885804-26750-1-git-send-email-chris@chris-wilson.co.uk
2016-05-10 17:20:20 +01:00
Ville Syrjälä ac840ae535 drm/i915: Re-enable GGTT earlier during resume on pre-gen6 platforms
Move the intel_enable_gtt() call to happen before we touch the GTT
during resume. Right now it's done way too late. Before
commit ebb7c78d35 ("agp/intel-gtt: Only register fake agp driver for gen1")
it was actually done earlier on account of also getting called from
the resume hook of the fake agp driver. With the fake agp driver
no longer getting registered we must move the call up.

The symptoms I've seen on my 830 machine include lowmem corruption,
other kinds of memory corruption, and straight up hung machine during
or just after resume. Not really sure what causes the memory corruption,
but so far I've not seen any with this fix.

I think we shouldn't really need to call this during init, but we have
been doing that so I've decided to keep the call. However moving that
call earlier could be prudent as well. Doing it right after the
intel-gtt probe seems appropriate.

Also tested this on 946gz,elk,ilk and all seemed quite happy with
this change.

v2: Reorder init_hw vs. enable_hw functions (Chris)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: ebb7c78d35 ("agp/intel-gtt: Only register fake agp driver for gen1")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1462559755-353-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-05-10 12:29:33 +03:00
Chris Wilson c033666a94 drm/i915: Store a i915 backpointer from engine, and use it
text	   data	    bss	    dec	    hex	filename
6309351	3578714	 696320	10584385	 a18141	vmlinux
6308391	3578714	 696320	10583425	 a17d81	vmlinux

Almost 1KiB of code reduction.

v2: More s/INTEL_INFO()->gen/INTEL_GEN()/ and IS_GENx() conversions

   text	   data	    bss	    dec	    hex	filename
6304579	3578778	 696320	10579677	 a16edd	vmlinux
6303427	3578778	 696320	10578525	 a16a5d	vmlinux

Now over 1KiB!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1462545621-30125-3-git-send-email-chris@chris-wilson.co.uk
2016-05-09 13:41:24 +01:00
Tvrtko Ursulin 91d14251bb drm/i915: Small display interrupt handlers tidy
I have noticed some of our interrupt handlers use both dev and
dev_priv while they could get away with only dev_priv in the
huge majority of cases.

Tidying that up had a cascading effect on changing functions
prototypes, so relatively big churn factor, but I think it is
for the better.

For example even where changes cascade out of i915_irq.c, for
functions prefixed with intel_, genX_ or <plat>_, it makes more
sense to take dev_priv directly anyway.

This allows us to eliminate local variables and intermixed usage
of dev and dev_priv where only one is good enough.

End result is shrinkage of both source and the resulting binary.

i915.ko:

 - .text         000b0899
 + .text         000b0619

Or if we look at the Gen8 display irq chain:

 -00000000000006ad t gen8_irq_handler
 +0000000000000663 t gen8_irq_handler
   -0000000000000028 T intel_opregion_asle_intr
   +0000000000000024 T intel_opregion_asle_intr
   -000000000000008c t ilk_hpd_irq_handler
   +000000000000007f t ilk_hpd_irq_handler
   -0000000000000116 T intel_check_page_flip
   +0000000000000112 T intel_check_page_flip
   -000000000000011a T intel_prepare_page_flip
   +0000000000000119 T intel_prepare_page_flip
   -0000000000000014 T intel_finish_page_flip_plane
   +0000000000000013 T intel_finish_page_flip_plane
   -0000000000000053 t hsw_pipe_crc_irq_handler
   +000000000000004c t hsw_pipe_crc_irq_handler
   -000000000000022e t cpt_irq_handler
   +0000000000000213 t cpt_irq_handler

So small shrinkage but it is all fast paths so doesn't harm.

Situation is similar in other interrupt handlers as well.

v2: Tidy intel_queue_rps_boost_for_request as well. (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-05-09 13:38:16 +01:00
Dave Airlie fffb675106 Merge tag 'drm-intel-next-2016-04-25' of git://anongit.freedesktop.org/drm-intel into drm-next
- more userptr cornercase fixes from Chris
- clean up and tune forcewake handling (Tvrtko)
- more underrun fixes from Ville, mostly for ilk to appeas CI
- fix unclaimed register warnings on vlv/chv and enable the debug code to catch
  them by default (Ville)
- skl gpu hang fixes for gt3/4 (Mika Kuoppala)
- edram improvements for gen9+ (Mika again)
- clean up gpu reset corner cases (Chris)
- fix ctx/ring machine deaths on snb/ilk (Chris)
- MOCS programming for all engines (Peter Antoine)
- robustify/clean up vlv/chv irq handler (Ville)
- split gen8+ irq handlers into ack/handle phase (Ville)
- tons of bxt rpm fixes (mostly around firmware interactions), from Imre
- hook up panel fitting for dsi panels (Ville)
- more runtime PM fixes all over from Imre
- shrinker polish (Chris)
- more guc fixes from Alex Dai and Dave Gordon
- tons of bugfixes and small polish all over (but with a big focus on bxt)

* tag 'drm-intel-next-2016-04-25' of git://anongit.freedesktop.org/drm-intel: (142 commits)
  drm/i915: Update DRIVER_DATE to 20160425
  drm/i915/bxt: Explicitly clear the Turbo control register
  drm/i915: Correct the i915_frequency_info debugfs output
  drm/i915: Macros to convert PM time interval values to microseconds
  drm/i915: Make RPS EI/thresholds multiple of 25 on SNB-BDW
  drm/i915: Fake HDMI live status
  drm/i915/bxt: Force reprogramming a PHY with invalid HW state
  drm/i915/bxt: Wait for PHY1 GRC done if PHY0 was already enabled
  drm/i915/bxt: Use PHY0 GRC value for HW state verification
  drm/i915: use dev_priv directly in gen8_ppgtt_notify_vgt
  drm/i915/bxt: Enable DC5 during runtime resume
  drm/i915/bxt: Sanitize DC state tracking during system resume
  drm/i915/bxt: Don't uninit/init display core twice during system suspend/resume
  drm/i915: Inline intel_suspend_complete
  drm/i915/kbl: Don't WARN for expected secondary MISC IO power well request
  drm/i915: Fix eDP low vswing for Broadwell
  drm/i915: check for ERR_PTR from i915_gem_object_pin_map()
  drm/i915/guc: local optimisations and updating comments
  drm/i915/guc: drop cached copy of 'wq_head'
  drm/i915/guc: keep GuC doorbell & process descriptor mapped in kernel
  ...
2016-05-04 17:25:30 +10:00
Chris Wilson c14005a80f drm/i915: Enable semaphores for legacy submission on gen8
We have sufficient evidence from igt to support that semaphores are in
a working state. Enabling semaphores now for legacy provides a better
comparison of execlists against legacy ring submission.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461928823-10298-6-git-send-email-chris@chris-wilson.co.uk
2016-04-29 17:47:08 +01:00
Imre Deak f62c79b33f drm/i915/bxt: Enable DC5 during runtime resume
Right after runtime resume we know that we can re-enable DC5, since we
just disabled DC9 and power well 2 is disabled. So enable DC5 explicitly
instead of delaying this until the next time we disable power well 2.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461173277-16090-5-git-send-email-imre.deak@intel.com
2016-04-22 15:12:05 +03:00
Imre Deak da2f41d107 drm/i915/bxt: Sanitize DC state tracking during system resume
After suspend-to-ram or -disk we don't know what power state the display
HW will be, DC0 or DC9 are both possible states, so reset the software
DC state tracking in these cases. This gets rid of 'DC state mismatch'
error messages during resuming from ram or disk where we expected to be
in DC9 (as set by the suspend handler) but we are in DC0.

v2:
- Remove extra WS in gen9_sanitize_dc_state() (Bob)

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461173277-16090-4-git-send-email-imre.deak@intel.com
2016-04-22 15:12:04 +03:00
Imre Deak b8aea3d1f4 drm/i915/bxt: Don't uninit/init display core twice during system suspend/resume
Atm, we run the BSpec display core uninit/init sequences twice during
system suspend/resume. While this shouldn't cause any problem, it's
redundant, so get rid of the duplicate call.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461173277-16090-3-git-send-email-imre.deak@intel.com
2016-04-22 15:12:04 +03:00
Imre Deak 507e126e07 drm/i915: Inline intel_suspend_complete
Initially we thought that the platform specific suspend/resume sequences
can be shared between the runtime and system suspend/resume handlers.
This turned out to be not true, we have quite a few differences on most
of the platforms. This was realized already earlier by Paulo who
inlined the platform specific resume_prepare handlers. We have the
same problem with the corresponding suspend_complete handlers, there are
platform differences that make it unfeasible to share the code between
the runtime and system suspend paths. Also now we call functions that
need to be paired like hsw_enable_pc8()/hsw_disable_pc8() from different
levels of the call stack, which is confusing. Fix this by inlining the
suspend_complete handlers too.

This is also needed by the next patch that removes a redundant
uninit/init call during system suspend/resume on BXT.

No functional change.

CC: Paulo Zanoni <przanoni@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
[s/uninline/inline in the commit message]
Link: http://patchwork.freedesktop.org/patch/msgid/1461173277-16090-2-git-send-email-imre.deak@intel.com
2016-04-22 15:11:39 +03:00
Dave Airlie 605b28c859 Merge tag 'drm-intel-next-2016-04-11' of git://anongit.freedesktop.org/drm-intel into drm-next
- make modeset hw state checker atomic aware (Maarten)
- close races in gpu stuck detection/seqno reading (Chris)
- tons&tons of small improvements from Chris Wilson all over the gem code
- more dsi/bxt work from Ramalingam&Jani
- macro polish from Joonas
- guc fw loading fixes (Arun&Dave)
- vmap notifier (acked by Andrew) + i915 support by Chris Wilson
- create bottom half for execlist irq processing (Chris Wilson)
- vlv/chv pll cleanup (Ville)
- rework DP detection, especially sink detection (Shubhangi Shrivastava)
- make color manager support fully atomic (Maarten)
- avoid livelock on chv in execlist irq handler (Chris)

* tag 'drm-intel-next-2016-04-11' of git://anongit.freedesktop.org/drm-intel: (82 commits)
  drm/i915: Update DRIVER_DATE to 20160411
  drm/i915: Avoid allocating a vmap arena for a single page
  drm,i915: Introduce drm_malloc_gfp()
  drm/i915/shrinker: Restrict vmap purge to objects with vmaps
  drm/i915: Refactor duplicate object vmap functions
  drm/i915: Consolidate common error handling in intel_pin_and_map_ringbuffer_obj
  drm/i915/dmabuf: Tighten struct_mutex for unmap_dma_buf
  drm/i915: implement WaClearTdlStateAckDirtyBits
  drm/i915/bxt: Reversed polarity of PORT_PLL_REF_SEL bit
  drm/i915: Rename hw state checker to hw state verifier.
  drm/i915: Move modeset state verifier calls.
  drm/i915: Make modeset state verifier take crtc as argument.
  drm/i915: Replace manual barrier() with READ_ONCE() in HWS accessor
  drm/i915: Use simplest form for flushing the single cacheline in the HWS
  drm/i915: Harden detection of missed interrupts
  drm/i915: Separate out the seqno-barrier from engine->get_seqno
  drm/i915: Remove forcewake dance from seqno/irq barrier on legacy gen6+
  drm/i915: Fixup the free space logic in ring_prepare
  drm/i915: Simplify check for idleness in hangcheck
  drm/i915: Apply a mb between emitting the request and hangcheck
  ...
2016-04-22 09:03:31 +10:00
Imre Deak f74ed08d55 drm/i915/gen9: Fix runtime PM refcounting in case DMC firmware isn't loaded
While we disable runtime PM and with that display power well support if
the DMC firmware isn't loaded, we still want to disable power wells
during system suspend and driver unload. So drop/reacquire the
corresponding power refcount during suspend/resume and driver unloading.
This also means we have to check if DMC is not loaded and skip enabling
DC states in the power well code.

v2:
- Reuse intel_csr_ucode_suspend() in intel_csr_ucode_fini() instead of
  opencoding the former. (Chris)
- Add docbook comment to the public resume and suspend functions.

CC: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1460980101-14713-1-git-send-email-imre.deak@intel.com
2016-04-19 12:33:48 +03:00
Imre Deak 44410cd0bf drm/i915: Fix system resume if PCI device remained enabled
During system resume we depended on pci_enable_device() also putting the
device into PCI D0 state. This won't work if the PCI device was already
enabled but still in D3 state. This is because pci_enable_device() is
refcounted and will not change the HW state if called with a non-zero
refcount. Leaving the device in D3 will make all subsequent device
accesses fail.

This didn't cause a problem most of the time, since we resumed with an
enable refcount of 0. But it fails at least after module reload because
after that we also happen to leak a PCI device enable reference: During
probing we call drm_get_pci_dev() which will enable the PCI device, but
during device removal drm_put_dev() won't disable it. This is a bug of
its own in DRM core, but without much harm as it only leaves the PCI
device enabled. Fixing it is also a bit more involved, due to DRM
mid-layering and because it affects non-i915 drivers too. The fix in
this patch is valid regardless of the problem in DRM core.

v2:
- Add a code comment about the relation of this fix to the freeze/thaw
  vs. the suspend/resume phases. (Ville)
- Add a code comment about the inconsistent ordering of set power state
  and device enable calls. (Chris)

CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
CC: Chris Wilson <chris@chris-wilson.co.uk>
CC: stable@vger.kernel.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1460979954-14503-1-git-send-email-imre.deak@intel.com
2016-04-19 12:31:47 +03:00
Imre Deak 6e35e8ab6f drm/i915: Fix error path in i915_drm_resume_early
If system resume fails, this may lead to a runtime PM wake reference
underflow used for runtime PM state checking.

Fixes: 1f814daca4 ("drm/i915: add support for checking if we hold an RPM reference")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1460963062-13211-2-git-send-email-imre.deak@intel.com
2016-04-19 12:28:04 +03:00
Imre Deak d7d7c9ee69 drm/i915/bxt: Don't toggle power well 1 on-demand
Power well 1 is managed by the DMC firmware so don't toggle it on-demand
from the driver. This means we need to follow the BSpec display
initialization sequence during driver loading and resuming (both system
and runtime) and enable power well 1 only once there. Afterwards DMC
will toggle power well 1 whenever entering/exiting DC5.

For this to work we also need to do away getting the PLL power domain,
since that just kept runtime PM disabled for good.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459515767-29228-12-git-send-email-imre.deak@intel.com
2016-04-15 14:48:18 +03:00
Imre Deak c6c4696fa5 drm/i915/bxt: Pass drm_i915_private to DDI PHY, CDCLK helpers
For internal APIs passing dev_priv is preferred to reduce indirections,
so convert over a few DDI PHY, CDCLK helpers.

No functional change.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459515767-29228-10-git-send-email-imre.deak@intel.com
2016-04-15 14:48:17 +03:00
Imre Deak a7c8125f46 drm/i915/bxt: Suspend power domains during suspend-to-idle
On SKL/KBL suspend-to-idle (aka freeze/s0ix) is performed with DMC
firmware assistance where the target display power state is DC6. On
Broxton on the other hand we don't use the firmware for this, but rely
instead on a manual DC9 flow. For this we have to uninitialize the
display following the BSpec display uninit sequence, just as during
S3/S4, so make sure we follow this sequence.

CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459515767-29228-8-git-send-email-imre.deak@intel.com
2016-04-15 14:46:54 +03:00
Chris Wilson 804e59a830 drm/i915: Suppress error message when GPU resets are disabled
If we do not have lowlevel support for reseting the GPU, or if the user
has explicitly disabled reseting the device, the failure is expected.
Since it is an expected failure, we should be using a lower priority
message than *ERROR*, perhaps NOTICE. In the absence of DRM_NOTICE, just
emit the expected failure as a DEBUG message.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460565315-7748-10-git-send-email-chris@chris-wilson.co.uk
2016-04-14 10:45:40 +01:00
Chris Wilson d98c52cf4f drm/i915: Tighten reset_counter for reset status
In the reset_counter, we use two bits to track a GPU hang and reset. The
low bit is a "reset-in-progress" flag that we set to signal when we need
to break waiters in order for the recovery task to grab the mutex. As
soon as the recovery task has the mutex, we can clear that flag (which
we do by incrementing the reset_counter thereby incrementing the gobal
reset epoch). By clearing that flag when the recovery task holds the
struct_mutex, we can forgo a second flag that simply tells GEM to ignore
the "reset-in-progress" flag.

The second flag we store in the reset_counter is whether the
reset failed and we consider the GPU terminally wedged. Whilst this flag
is set, all access to the GPU (at least through GEM rather than direct mmio
access) is verboten.

PS: Fun is in store, as in the future we want to move from a global
reset epoch to a per-engine reset engine with request recovery.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460565315-7748-6-git-send-email-chris@chris-wilson.co.uk
2016-04-14 10:45:40 +01:00
Joonas Lahtinen 2d1fe07340 drm/i915: Do not use {HAS_*, IS_*, INTEL_INFO}(dev_priv->dev)
dev_priv is what the macro works hard to extract, pass it directly.

> sed 's/\([A-Z].*(dev_priv\)->dev)/\1)/g'

v2:
- Include all wrapper macros too (Chris)

v3:
- Include sed cmdline (Chris)

v4:
- Break long line
- Rebase

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1460016485-8089-1-git-send-email-joonas.lahtinen@linux.intel.com
2016-04-07 14:50:26 +03:00
Dave Airlie 85bd5ac371 Merge tag 'drm-intel-next-2016-03-30' of git://anongit.freedesktop.org/drm-intel into drm-next
- VBT code refactor for a clean split between parsing&using of firmware
  information (Jani)
- untangle the pll computation code, and splitting up the monster
  i9xx_crtc_compute_clocks (Ander)
- dsi support for bxt (Jani, Shashank Sharma and others)
- color manager (i.e. de-gamma, color conversion matrix & gamma support) from
  Lionel Landwerlin
- Vulkan hsw support in the command parser (Jordan Justen)
- large-scale renaming of intel_engine_cs variables/parameters to avoid the epic
  ring vs. engine confusion introduced in gen8 (Tvrtko Ursulin)
- few atomic patches from Maarten&Matt, big one is two-stage wm programming on ilk-bdw
- refactor driver load and add infrastructure to inject load failures for
  testing, from Imre
- various small things all over

* tag 'drm-intel-next-2016-03-30' of git://anongit.freedesktop.org/drm-intel: (179 commits)
  drm/i915: Update DRIVER_DATE to 20160330
  drm/i915: Call intel_dp_mst_resume() before resuming displays
  drm/i915: Fix races on fbdev
  drm/i915: remove unused dev_priv->render_reclock_avail
  drm/i915: move sdvo mappings to vbt data
  drm/i915: move edp low vswing config to vbt data
  drm/i915: use a substruct in vbt data for edp
  drm/i915: replace for_each_engine()
  drm/i915: introduce for_each_engine_id()
  drm/i915/bxt: Fix DSI HW state readout
  drm/i915: Remove vblank wait from hsw_enable_ips, v2.
  drm/i915: Tidy aliasing_gtt_bind_vma()
  drm/i915: Split PNV version of crtc_compute_clock()
  drm/i915: Split g4x_crtc_compute_clock()
  drm/i915: Split i8xx_crtc_compute_clock()
  drm/i915: Split CHV and VLV specific crtc_compute_clock() hooks
  drm/i915: Merge ironlake_compute_clocks() and ironlake_crtc_compute_clock()
  drm/i915: Move fp divisor calculation into ironlake_compute_dpll()
  drm/i915: Pass crtc_state->dpll directly to ->find_dpll()
  drm/i915: Simplify ironlake_crtc_compute_clock() CPU eDP case
  ...
2016-04-06 09:40:07 +10:00
Dave Airlie e7c8e54440 Merge tag 'topic/drm-misc-2016-04-01' of git://anongit.freedesktop.org/drm-intel into drm-next
* tag 'topic/drm-misc-2016-04-01' of git://anongit.freedesktop.org/drm-intel:
  drm: Add new DCS commands in the enum list
  drm: Make uapi headers C89 pendantic compliant
  drm/atomic: export drm_atomic_helper_wait_for_fences()
  drm: Untangle __KERNEL__ guards
  drm: Move DRM_MODE_OBJECT_* to uapi headers
  drm: align #include directives with libdrm in uapi headers
  drm: Make drm.h uapi header safe for C++
  vgacon: dummy implementation for vgacon_text_force
  drm/sysfs: Nuke TV/DVI property files
  drm/ttm: Remove TTM_HAS_AGP
  drm: bridge/dw-hdmi: Remove pre_enable/post_disable dummy funcs
  Revert "drm: Don't pass negative delta to ktime_sub_ns()"
  drm/atmel: Fixup drm_connector_/unplug/unregister/_all
  drm: Rename drm_connector_unplug_all() to drm_connector_unregister_all()
  drm: bridge: Make (pre/post) enable/disable callbacks optional
2016-04-06 09:39:01 +10:00
Rodrigo Vivi 9c7417022d drm/i915/kbl: Remove preliminary_hw_support protection from KBL.
We now have KBL machines running in our CI systems and with no
blocking issues that could cause a full hangs or blank screens.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459349881-951-1-git-send-email-rodrigo.vivi@intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-03-30 10:51:53 -07:00
Daniel Vetter 44debe7a12 vgacon: dummy implementation for vgacon_text_force
This allows us to ditch a ton of ugly #ifdefs from a bunch of drm modeset
drivers.

v2: Make the dummy function actually return a sane value, spotted by
Ville.

v3: Because the patch is still in limbo there's no more drivers to
convert, noticed by Emil.

v4: Rebase once more, because hooray. I'll just go ahead an apply this
one later on to drm-misc.

Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-03-30 17:37:57 +02:00
Lyude a16b7658f4 drm/i915: Call intel_dp_mst_resume() before resuming displays
Since we need MST devices ready before we try to resume displays,
calling this after intel_display_resume() can result in some issues with
various laptop docks where the monitor won't turn back on after
suspending the system.

This order was originally changed in

	commit e7d6f7d708 ("drm/i915: resume MST after reading back hw state")

In order to fix some unclaimed register errors, however the actual cause
of those has since been fixed.

CC: stable@vger.kernel.org
Signed-off-by: Lyude <cpaul@redhat.com>
[danvet: Resolve conflicts with locking changes.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-03-30 08:23:41 +02:00
Lionel Landwerlin 29dc3739e5 drm/i915: Implement color management on chv
Patch based on a previous series by Shashank Sharma.

v2: Update contributors

v3: Refactor degamma/gamma LUTs load into a single function

v4: Remove unused variable

Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Kumar, Kiran S <kiran.s.kumar@intel.com>
Signed-off-by: Kausal Malladi <kausalmalladi@gmail.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458125837-2576-5-git-send-email-lionel.g.landwerlin@intel.com
2016-03-21 11:41:28 -07:00
Lionel Landwerlin 82cf435b31 drm/i915: Implement color management on bdw/skl/bxt/kbl
Patch based on a previous series by Shashank Sharma.

v2: Do not read GAMMA_MODE register to figure what mode we're in

v3: Program PREC_PAL_GC_MAX to clamp pixel values > 1.0

    Add documentation on how the Broadcast RGB property is affected by CTM

v4: Update contributors

v5: Refactor degamma/gamma LUTs load into a single function

v6: Fix missing intel_crtc variable (bisect issue)

v7: Fix & simplify limited range matrix multiplication (Matt Roper's
    comment)

Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Kumar, Kiran S <kiran.s.kumar@intel.com>
Signed-off-by: Kausal Malladi <kausalmalladi@gmail.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acknowledged-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458125837-2576-4-git-send-email-lionel.g.landwerlin@intel.com
2016-03-21 11:40:31 -07:00
Jesse Barnes 1844a66b98 drm/i915: add another virtual PCH bridge for passthrough support
Some configs use the P2X type but some use a P3X type PCH, so add that
to the detect_pch function so things work correctly.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Allen Kay <allen.m.kay@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1458160290-16710-1-git-send-email-jbarnes@virtuousgeek.org
2016-03-21 10:14:28 +01:00
Mika Kuoppala ee4b6faf96 drm/i915: Modify reset func to handle per engine resets
In full gpu reset we prime all engines and reset domains corresponding to
each engine. Per engine reset is just a special case of this process
wherein only a single engine is reset. This change is aimed to modify
relevant functions to achieve this. There are some other steps we carry out
in case of engine reset which are addressed in later patches.

Reset func now accepts a mask of all engines that need to be reset. Where
per engine resets are supported, error handler populates the mask
accordingly otherwise all engines are specified.

v2: ALL_ENGINES mask fixup, better for_each_ring_masked (Chris)
v3: Whitespace fixes (Chris)
v4: Rebase due to s/ring/engine

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458143640-20563-1-git-send-email-mika.kuoppala@intel.com
2016-03-17 15:01:15 +02:00
Maarten Lankhorst e2c8b8701e drm/i915: Use atomic helpers for suspend, v2.
Instead of duplicating the functionality now that we no longer need
to preserve dpll state we can move to using the upstream suspend helper.

Changes since v1:
- Call hw readout with all mutexes held.
- Rework intel_display_suspend to only assign modeset_restore_state
  on success.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/56C2E686.5060803@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2016-02-16 11:23:46 +01:00
Lukas Wunner 704ab614ec drm/i915: Defer probe if gmux is present but its driver isn't
gmux is a microcontroller built into dual GPU MacBook Pros.
On pre-retina MBPs, if we're the inactive GPU, we need apple-gmux
to temporarily switch DDC so that we can probe the panel's EDID.

The checks for CONFIG_VGA_ARB and CONFIG_VGA_SWITCHEROO are necessary
because if either of them is disabled but gmux is present, the driver
would never load, even if we're the active GPU. (vga_default_device()
would evaluate to NULL and vga_switcheroo_handler_flags() would
evaluate to 0.)

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115
Tested-by: Lukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/f56ee6a0600a3e1bb5bed4d0db4ed9ade7445c47.1452525860.git.lukas@wunner.de
2016-02-09 11:21:12 +01:00
Dave Airlie b039d6d025 Merge tag 'drm-intel-next-2016-01-24' of git://anongit.freedesktop.org/drm-intel into drm-next
- support for v3 vbt dsi blocks (Jani)
- improve mmio debug checks (Mika Kuoppala)
- reorg the ddi port translation table entries and related code (Ville)
- reorg gen8 interrupt handling for future platforms (Tvrtko)
- refactor tile width/height computations for framebuffers (Ville)
- kerneldoc integration for intel_pm.c (Jani)
- move default context from engines to device-global dev_priv (Dave Gordon)
- make seqno/irq ordering coherent with execlist (Chris)
- decouple internal engine number from UABI (Chris&Tvrtko)
- tons of small fixes all over, as usual

* tag 'drm-intel-next-2016-01-24' of git://anongit.freedesktop.org/drm-intel: (148 commits)
  drm/i915: Update DRIVER_DATE to 20160124
  drm/i915: Seal busy-ioctl uABI and prevent leaking of internal ids
  drm/i915: Decouple execbuf uAPI from internal implementation
  drm/i915: Use ordered seqno write interrupt generation on gen8+ execlists
  drm/i915: Limit the auto arming of mmio debugs on vlv/chv
  drm/i915: Tune down "GT register while GT waking disabled" message
  drm/i915: tidy up a few leftovers
  drm/i915: abolish separate per-ring default_context pointers
  drm/i915: simplify allocation of driver-internal requests
  drm/i915: Fix NULL plane->fb oops on SKL
  drm/i915: Do not put big intel_crtc_state on the stack
  Revert "drm/i915: Add two-stage ILK-style watermark programming (v10)"
  drm/i915: add DOC: headline to RC6 kernel-doc
  drm/i915: turn some bogus kernel-doc comments to normal comments
  drm/i915/sdvo: revert bogus kernel-doc comments to normal comments
  drm/i915/gen9: Correct max save/restore register count during gpu reset with GuC
  drm/i915: Demote user facing DMC firmware load failure message
  drm/i915: use hlist_for_each_entry
  drm/i915: skl_update_scaler() wants a rotation bitmask instead of bit number
  drm/i915: Don't reject primary plane windowing with color keying enabled on SKL+
  ...
2016-02-09 10:27:41 +10:00
Gerd Hoffmann f2e305108f drm/i915: refine qemu south bridge detection
The test for the qemu q35 south bridge added by commit
"39bfcd52 drm/i915: more virtual south bridge detection"
also matches on real hardware.  Having the check for
virtual systems last in the list is not enough to avoid
that ...

Refine the check by additionally verifying the pci
subsystem id to see whenever it *really* is qemu.

[ v2: fix subvendor tyops ]

Reported-and-tested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Bruno Wolff III <bruno@wolff.to>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453719748-10944-1-git-send-email-kraxel@redhat.com
(cherry picked from commit 1e859111c1)
2016-01-29 09:15:03 +02:00
Daniel Vetter 6fa283b07e drm/i915: Tune down "GT register while GT waking disabled" message
We've had this since forever, and's randomly reporting issues and as
such causing piles&piles of CI noise. Mika is working on proper debug
infrastructure for this, and on fixing this properly.

Meanwhile make CI more useful for everyone else.

Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93121
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453233656-12955-1-git-send-email-daniel.vetter@ffwll.ch
2016-01-21 11:50:52 +02:00
Jani Nikula 87ad321287 drm/i915: add onoff utility function
Add a common function to return "on" or "off" string based on the
argument, and drop the local versions of it.

This is the onoff version of

commit 42a8ca4cb4
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Thu Aug 27 16:23:30 2015 +0300

    drm/i915: add yesno utility function

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452768814-29787-1-git-send-email-jani.nikula@intel.com
2016-01-14 15:00:12 +02:00
Ville Syrjälä 6a7e4f9989 drm/i915: Kill intel_prepare_ddi()
Move the ddi buffer translation programming to occur from the encoder
.pre_enable() hook, for just the ddi port we are enabling. Previously
we used to reprogram the translations for all ddi ports during
init and during power well enabling.

v2: s/intel_prepare_ddi_buffers/intel_prepare_ddi_buffer/ (Daniel)
    Resolve conflicts due to  dev_priv->atomic_cdclk_freq

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-12 16:05:12 +02:00
Mika Kuoppala bc3b9346cd drm/i915: Arm the unclaimed mmio debugs on suspend path
If we go into suspend with unclaimed access detected,
it would be nice to catch that access on a next suspend path.
So instead of just notifying about it, arm the unclaimed
mmio checks on suspend side.

We want to keep the asymmetry on resume, as if it was
on resume path, it was not driver that is responsible so
no point in arming mmio debugs.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1452261080-6979-2-git-send-email-mika.kuoppala@intel.com
2016-01-11 18:29:28 +02:00
Mika Kuoppala 55ec45c2ce drm/i915: Detect and clear unclaimed access on resume
If something, the usual suspect being bios, access hw
behind our back, don't let it slide into situation where
normal register access will detect this and spit out
a warn on into dmesg. On some bdw bioses this happens
during igt/bat run always and as there is not much we can
do about it, its better just to detect and flush this
explicitly on resume and only print a debug message.

v2: use DRM_DEBUG_DRIVER (Chris)
v3: s/access/mmio, s/prior/prior to, s/dev/dev_priv

Testcase: igt/pm_rpm/basic-rte
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <przanoni@gmail.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[Mika: fixed merge conflict]
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450189512-30360-3-git-send-email-mika.kuoppala@intel.com
2016-01-08 13:13:45 +02:00
Imre Deak 1f814daca4 drm/i915: add support for checking if we hold an RPM reference
Atm, we assert that the device is not suspended until the point when the
device is truly put to a suspended state. This is fine, but we can catch
more problems if we check that RPM refcount is non-zero. After that one
drops to zero we shouldn't access the device any more, even if the actual
device suspend may be delayed. Change assert_rpm_wakelock_held()
accordingly to check for a non-zero RPM refcount in addition to the
current device-not-suspended check.

For the new asserts to work we need to annotate every place explicitly in
the code where we expect that the device is powered. The places where we
only assume this, but may not hold an RPM reference:
- driver load
  We assume the device to be powered until we enable RPM. Make this
  explicit by taking an RPM reference around the load function.
- system and runtime sudpend/resume handlers
  These handlers are called when the RPM reference becomes 0 and know the
  exact point after which the device can get powered off. Disable the
  RPM-reference-held check for their duration.
- the IRQ, hangcheck and RPS work handlers
  These handlers are flushed in the system/runtime suspend handler
  before the device is powered off, so it's guaranteed that they won't
  run while the device is powered off even though they don't hold any
  RPM reference. Disable the RPM-reference-held check for their duration.

In all these cases we still check that the device is not suspended.
These explicit annotations also have the positive side effect of
documenting our assumptions better.

This caught additional WARNs from the atomic modeset path, those should
be fixed separately.

v2:
- remove the redundant HAS_RUNTIME_PM check (moved to patch 1) (Ville)
v3:
- use a new dedicated RPM wakelock refcount to also catch cases where
  our own RPM get/put functions were not called (Chris)
- assert also that the new RPM wakelock refcount is 0 in the RPM
  suspend handler (Chris)
- change the assert error message to be more meaningful (Chris)
- prevent false assert errors and check that the RPM wakelock is 0 in
  the RPM resume handler too
- prevent false assert errors in the hangcheck work too
- add a device not suspended assert check to the hangcheck work
v4:
- rename disable/enable_rpm_asserts to disable/enable_rpm_wakeref_asserts
  and wakelock_count to wakeref_count
- disable the wakeref asserts in the IRQ handlers and RPS work too
- update/clarify commit message
v5:
- mark places we plan to change to use proper RPM refcounting with
  separate DISABLE/ENABLE_RPM_WAKEREF_ASSERTS aliases (Chris)

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1450227139-13471-1-git-send-email-imre.deak@intel.com
2015-12-17 15:59:44 +02:00
Jani Nikula 19c8054c4d drm/i915: prefer for_each_intel_* macros for iteration
Use the for_each_intel_* macros for iterating intel_encoder,
intel_connector, and intel_crtc. No functional changes.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450262896-5325-1-git-send-email-jani.nikula@intel.com
2015-12-16 14:35:25 +02:00
Wayne Boyer 666a45379e drm/i915: Separate cherryview from valleyview
The cherryview device shares many characteristics with the valleyview
device.  When support was added to the driver for cherryview, the
corresponding device info structure included .is_valleyview = 1.
This is not correct and leads to some confusion.

This patch changes .is_valleyview to .is_cherryview in the cherryview
device info structure and simplifies the IS_CHERRYVIEW macro.
Then where appropriate, instances of IS_VALLEYVIEW are replaced with
IS_VALLEYVIEW || IS_CHERRYVIEW or equivalent.

v2: Use IS_VALLEYVIEW || IS_CHERRYVIEW instead of defining a new macro.
    Also add followup patches to fix issues discovered during the first
    review. (Ville)
v3: Fix some style issues and one gen check. Remove CRT related changes
    as CRT is not supported on CHV. (Imre, Ville)
v4: Make a few more optimizations. (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Wayne Boyer <wayne.boyer@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449692975-14803-1-git-send-email-wayne.boyer@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
2015-12-10 11:07:24 +01:00
Joonas Lahtinen 825f272895 drm/i915: Cancel hangcheck before GPU is suspended
In order to avoid accessing GPU registers while GPU is suspended cancel
the hangcheck work before calling intel_suspend_complete which actually
puts the GPU to suspend. Otherwise hangcheck might do MMIO reads to a
suspended GPU.

Placement before intel_guc_suspend is imitated from i915_drm_suspend
which cancels the work at i915_gem_suspend, to keep the functions
similar.

On VLV systems, namely BYT, this was causing an error during runtime
suspend cycle:

[drm:vlv_check_no_gt_access [i915]] *ERROR* GT register access while GT waking disabled

Testcase: igt/pm_rpm/basic-rte
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93121

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1449669373-8588-1-git-send-email-joonas.lahtinen@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
2015-12-10 11:28:05 +02:00
Mika Kuoppala 15620206ae drm/i915/skl: Add SKL GT4 PCI IDs
Add Skylake Intel Graphics GT4 PCI IDs

v2: Rebase

Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1446811876-303-1-git-send-email-mika.kuoppala@intel.com
2015-12-04 19:03:50 +00:00
Daniel Vetter a9287dbc26 drm/i915: Restore skl_gt3 device info
This was broken in

commit 6a8beeffed
Author: Wayne Boyer <wayne.boyer@intel.com>
Date:   Wed Dec 2 13:28:14 2015 -0800

    drm/i915: Clean up device info structure definitions

and I didn't spot this while reviewing. We really need that CI farm up
asap!

Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Wayne Boyer <wayne.boyer@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-12-04 16:17:23 +01:00
Wayne Boyer 6a8beeffed drm/i915: Clean up device info structure definitions
Beginning with gen7, newer devices repetitively redefine values
for the device info structure members.  This patch simplifies the
structure definitions by grouping member value definitions into the
existing GEN7_FEATURES #define and into the new GEN7_LP_FEATURES
and HSW_FEATURES #defines.

Specifically, GEN_DEFAULT_PIPEOFFSETS and IVB_CURSOR_OFFSETS are
added to GEN7_FEATURES and subsequent IVB definitions are simplified.

VLV_FEATURES is defined to differentiate and simplify the
gen7 low power (LP) devices.

HSW_FEATURES is defined and used to simplify all HSW+ devices
except for LP.

v2: Use VLV_FEATURES for the gen7 low power devices. (Jani)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Wayne Boyer <wayne.boyer@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449091694-7681-1-git-send-email-wayne.boyer@intel.com
2015-12-04 11:24:25 +01:00
Gerd Hoffmann 39bfcd5235 drm/i915: more virtual south bridge detection
Commit "30c964a drm/i915: Detect virtual south bridge" detects and
handles the southbridge emulated by vmware esx.  Add the ich9 south
bridge emulated by 'qemu -M q35'.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-26 15:20:41 +01:00
Imre Deak bc87229f32 drm/i915/skl: enable PC9/10 power states during suspend-to-idle
During suspend-to-idle we need to keep the DMC firmware active and DC6
enabled, since otherwise we won't reach deep system power states like
PC9/10. The lead for this came from Nivedita who noticed that the
kernel's turbostat tool didn't report any PC9/10 residency change
across an 'echo freeze > /sys/power/state'.

Reported-by: Nivedita Swaminathan <nivedita.swaminathan@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447860750-18110-1-git-send-email-imre.deak@intel.com
2015-11-23 16:59:25 +02:00
Patrik Jakobsson a03bc7cd63 drm/i915/skl: Remove unused suspend and resume callbacks
Signed-off-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447084107-8521-13-git-send-email-patrik.jakobsson@linux.intel.com
2015-11-17 20:55:21 +02:00
Patrik Jakobsson 9f836f9016 drm/i915/gen9: Turn DC handling into a power well
Handle DC off as a power well where enabling the power well will prevent
the DMC to enter selected DC states (required around modesets and Aux
A). Disabling the power well will allow DC states again. For now the
highest DC state is DC6 for Skylake and DC5 for Broxton but will be
configurable for Skylake in a later patch.

v2: Check both DC5 and DC6 bits in power well enabled function (Ville)
v3:
- Remove unneeded DC_OFF case in skl_set_power_well() (Imre)
- Add PW2 dependency to DC_OFF (Imre)
v4: Put DC_OFF before PW2 in BXT power well array

Signed-off-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
[fixed line over 80 and parenthesis alignment checkpatch warns (imre)]
Link: http://patchwork.freedesktop.org/patch/msgid/1447687201-24759-1-git-send-email-patrik.jakobsson@linux.intel.com
2015-11-17 20:55:20 +02:00
Imre Deak 73dfc227ff drm/i915/skl: init/uninit display core as part of the HW power domain state
We need to initialize the display core part early, before initializing
the rest of the display power state. This is also described in the bspec
termed "Display initialization sequence". Atm we run this sequence
during driver loading after power domain HW state initialization which
is too late and during runtime suspend/resume which is unneeded and can
interere with DMC functionality which handles HW resources toggled
by this init/uninit sequence automatically. The init sequence must be
run as the first step of HW power state initialization and during
system resume. The uninit sequence must be run during system suspend.

To address the above move the init sequence to the initial HW power
state setup and the uninit sequence to a new power domains suspend
function called during system suspend.

As part of the init sequence we also have to reprogram the DMC firmware
as it's lost across a system suspend/resume cycle.

After this change CD clock initialization during driver loading will
happen only later after other dependent HW/SW parts are initialized,
while during system resume it will get initialized as the last step of
the init sequence. This distinction can be removed by some refactoring
of platform independent parts. I left this refactoring out from this
series since I didn't want to change non-SKL parts. This is a TODO for
later.

v2:
- fix error path in i915_drm_suspend_late()
- don't try to re-program the DMC firmware if it failed to load

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447774433-20834-1-git-send-email-imre.deak@intel.com
2015-11-17 20:55:07 +02:00
Imre Deak f514c2d842 drm/i915/gen9: flush DMC fw loading work during system suspend
Currently during system s/r we enable/disable DC6, so before we do so
make sure that the firmware loading is complete.

Note that whether we need to enable DC6 for S3/S4 is still open.  At
least the firmware program is lost during S3 and we need to reprogram it
after resuming. Until this is clarified we keep the current behavior and
enable/disable DC6.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Tested-by: Daniel Stone <daniels@collabora.com> # SKL
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1446069547-24760-13-git-send-email-imre.deak@intel.com
2015-11-12 17:31:10 +02:00
Animesh Manna 15e72c1fc1 drm/i915/gen9: Use flush_work to synchronize with dmc loader
During driver unload to ensure we dont have any pending task,
flush_work added to complete firmware loading task.

v1: Initial version.

v2: As per review comments from Daniel,
Removed flush_work from skl_set_power_well. As we have taken
power well refernece and rpm count during firmware loading
by using display_power_domain_get/put - this will always
ensure rpm will be blocked if firmware is not loaded.

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Tested-by: Daniel Stone <daniels@collabora.com> # SKL
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1446069547-24760-12-git-send-email-imre.deak@intel.com
2015-11-12 17:30:25 +02:00
Daniel Vetter f444837546 drm/i915/gen9: Use dev_priv in csr functions
As all csr firmware related opertion are not using any
any data structures of drm framework level, so better to
use dev_priv instead of dev. it's a new style! :)

Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Tested-by: Daniel Stone <daniels@collabora.com> # SKL
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1446069547-24760-9-git-send-email-imre.deak@intel.com
2015-11-12 17:22:52 +02:00
Daniel Vetter c729ed88af drm/i915/gen9: Simplify csr loading failure printing.
If we really want to we can be more verbose here, but we really don't
need an entire function for this.

Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Tested-by: Daniel Stone <daniels@collabora.com> # SKL
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1446069547-24760-7-git-send-email-imre.deak@intel.com
2015-11-12 17:20:48 +02:00
Daniel Vetter 414b7999b8 drm/i915/gen9: Remove csr.state, csr_lock and related code.
This removes two anti-patterns:
- Locking shouldn't be used to synchronize with async work (of any
  form, whether callbacks, workers or other threads). This is what the
  mutex_lock/unlock seems to have been for in intel_csr_load_program.
  Instead ordering should be ensured with the generic
  wait_for_completion()/complete(). Or more specific functions
  provided by the core kernel like e.g.
  flush_work()/cancel_work_sync() in the case of synchronizing with a
  work item.

- Don't invent own completion like the following code did with the
  (already removed) wait_for(csr_load_status_get()) pattern - it's
  really hard to get these right when you want them to be _really_
  correct (and be fast) in all cases. Furthermore it's easier to read
  code using the well-known primitives than new ones using
  non-standard names.

Before enabling/disabling DC6 check if the firmware is loaded
successfully. This is guaranteed during runtime s/r, since otherwise we
don't enable RPM, but not during system s/r.

Note that it's still unclear whether we need to enable/disable DC6
during system s/r, until that's clarified, keep the current behavior and
enable/disable DC6.

Also after this patch there is a race during system s/r where the
firmware may not be loaded yet, that's addressed in an upcoming patch.

v2-v3:
- unchanged
v4:
- rebased on latest drm-intel-nightly

Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
[imre: added code and note about checking if the firmware loaded ok,
 before enabling/disabling it]
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Tested-by: Daniel Stone <daniels@collabora.com> # SKL
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447341037-2623-1-git-send-email-imre.deak@intel.com
2015-11-12 17:16:51 +02:00
Deepak S 8b10c0cf21 drm/i915/kbl: Add Kabylake GT4 PCI ID
v2: (Rodrigo) Rebase after commit 3cb27f38f
    ("drm/i915: remove an extra level of indirection in PCI ID list")

Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Deepak S <deepak.s@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1446060072-19489-1-git-send-email-rodrigo.vivi@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-10-28 21:36:31 +02:00
Deepak S d97044b661 drm/i915/kbl: Add Kabylake PCI ID
v2: separate out device info into different GT (Damien)
v3: Add is_kabylake to the KBL gt3 structuer (Damien)
    Sort the platforms in older -> newer order (Damien)

v4: Split platform definition since is_skylake=1 on
    kabylake structure was Nacked. (Rodrigo)

v5: (Rodrigo) Rebase after commit 3cb27f38f
("drm/i915: remove an extra level of indirection in PCI ID list")

Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Deepak S <deepak.s@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1446059991-17033-1-git-send-email-rodrigo.vivi@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-10-28 21:36:09 +02:00
Rodrigo Vivi ef11bdb3e0 drm/i915/kbl: Introduce Kabylake platform defition.
Kabylake is a Intel® Processor containing Intel® HD Graphics
following Skylake.

It is Gen9p5, so it inherits everything from Skylake.

Let's start by adding the platform separated from Skylake
but reusing most of all features, functions etc. Later we
rebase the PCI-ID patch without is_skylake=1
so we don't replace what original Author did there.

Few IS_SKYLAKEs if statements are not being covered by this patch
on purpose:
   - Workarounds: Kabylake is derivated from Skylake H0 so no
     		  W/As apply here.
   - GuC: A following patch removes Kabylake support with an
     	  explanation: No firmware available yet.
   - DMC/CSR: Done in a separated patch since we need to be carefull
     	      and load the version for revision 7 since
	      Kabylake is Skylake H0.

v2: relative cleaner commit message and added the missed
    IS_KABYLAKE to intel_i2c.c as pointed out by Jani.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-10-28 21:35:38 +02:00
Rodrigo Vivi 7526ac195c drm/i915: Define IS_BROXTON properly.
Kabylake will also be defined as gen9 and !is_skylake.
So we need start by creating a proper Broxton
definition, otherwise we will break broxton with the
introduction of Kabylake.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1445966099-1640-2-git-send-email-rodrigo.vivi@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-10-28 21:34:22 +02:00
Jani Nikula 3cb27f38f2 drm/i915: remove an extra level of indirection in PCI ID list
Add the PCI IDs directly in the pciidlist array instead of defining an
extra macro. The minor benefit from this is neater diffs when adding to
the end of the list.

v2: drop the "aka" comment (Ville)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1446053589-21283-1-git-send-email-jani.nikula@intel.com
2015-10-28 19:37:19 +02:00
Animesh Manna 0a9d2bed55 drm/i915/skl: Making DC6 entry is the last call in suspend flow.
Mmio register access after dc6/dc5 entry is not allowed when
DC6 power states are enabled according to bspec (bspec-id 0527),
so enabling dc6 as the last call in suspend flow.

Addtional note from Imre:

Currently we keep DC6 enabled during modesets and DPAUX transfers, which
is not allowed according to the specification. This can lead at least to
PLL locking failures, DPAUX timeouts and prevent deeper package power
states (PC9/10). Fix this for now by enabling DC6 only when we know the
above events (modeset, DPAUX) can't happen.

This a temporary solution as some issues are still unsolved as described
in [1] and [2], we'll address those as a follow-up.

[1]
http://lists.freedesktop.org/archives/intel-gfx/2015-October/077669.html
[2]
http://lists.freedesktop.org/archives/intel-gfx/2015-October/077787.html

v1: Initial version.

v2: Based on review comment from Daniel,
- created a seperate patch for csr uninitialization set call.

v3: Rebased on top of latest code.

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-19 11:25:36 +02:00