Граф коммитов

366 Коммитов

Автор SHA1 Сообщение Дата
Jerry Lee 890bd0f899 libceph: ignore pool overlay and cache logic on redirects
OSD client should ignore cache/overlay flag if got redirect reply.
Otherwise, the client hangs when the cache tier is in forward mode.

[ idryomov: Redirects are effectively deprecated and no longer
  used or tested.  The original tiering modes based on redirects
  are inherently flawed because redirects can race and reorder,
  potentially resulting in data corruption.  The new proxy and
  readproxy tiering modes should be used instead of forward and
  readforward.  Still marking for stable as obviously correct,
  though. ]

Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/23296
URL: https://tracker.ceph.com/issues/36406
Signed-off-by: Jerry Lee <leisurelysw24@gmail.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-05-27 12:43:35 +02:00
Ilya Dryomov bb0e681dda libceph: directly skip to the end of redirect reply
Coverity complains about a double write to *p.  Don't bother with
osd_instructions and directly skip to the end of redirect reply.

Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-03-30 12:42:41 +02:00
Xiubo Li 5107d7d505 ceph: move ceph_osdc_{read,write}pages to ceph.ko
Since these helpers are only used by ceph.ko, move them there and
rename them with _sync_ qualifiers.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-03-30 12:42:40 +02:00
Ilya Dryomov e886274031 libceph: fix alloc_msg_with_page_vector() memory leaks
Make it so that CEPH_MSG_DATA_PAGES data item can own pages,
fixing a bunch of memory leaks for a page vector allocated in
alloc_msg_with_page_vector().  Currently, only watch-notify
messages trigger this allocation, and normally the page vector
is freed either in handle_watch_notify() or by the caller of
ceph_osdc_notify().  But if the message is freed before that
(e.g. if the session faults while reading in the message or
if the notify is stale), we leak the page vector.

This was supposed to be fixed by switching to a message-owned
pagelist, but that never happened.

Fixes: 1907920324 ("libceph: support for sending notifies")
Reported-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Roman Penyaev <rpenyaev@suse.de>
2020-03-23 13:07:08 +01:00
Luis Henriques 78beb0ff2f ceph: use copy-from2 op in copy_file_range
Instead of using the copy-from operation, switch copy_file_range to the
new copy-from2 operation, which allows to send the truncate_seq and
truncate_size parameters.

If an OSD does not support the copy-from2 operation it will return
-EOPNOTSUPP.  In that case, the kernel client will stop trying to do
remote object copies for this fs client and will always use the generic
VFS copy_file_range.

Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:40 +01:00
Ilya Dryomov 8edf84ba4d libceph: drop unused con parameter of calc_target()
This bit was omitted from a561372405 ("libceph: fix PG split vs OSD
(re)connect race") to avoid backport conflicts.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16 12:06:25 +02:00
David Disseldorp 4766815b11 libceph: handle OSD op ceph_pagelist_append() errors
osd_req_op_cls_init() and osd_req_op_xattr_init() currently propagate
ceph_pagelist_alloc() ENOMEM errors but ignore ceph_pagelist_append()
memory allocation failures. Add these checks and cleanup on error.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16 12:06:25 +02:00
Yan, Zheng 2cef0ba803 libceph: add function that clears osd client's abort_err
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16 12:06:23 +02:00
Yan, Zheng 120a75ea9f libceph: add function that reset client's entity addr
This function also re-open connections to OSD/MON, and re-send in-flight
OSD requests after re-opening connections to OSD.

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16 12:06:23 +02:00
Ilya Dryomov a561372405 libceph: fix PG split vs OSD (re)connect race
We can't rely on ->peer_features in calc_target() because it may be
called both when the OSD session is established and open and when it's
not.  ->peer_features is not valid unless the OSD session is open.  If
this happens on a PG split (pg_num increase), that could mean we don't
resend a request that should have been resent, hanging the client
indefinitely.

In userspace this was fixed by looking at require_osd_release and
get_xinfo[osd].features fields of the osdmap.  However these fields
belong to the OSD section of the osdmap, which the kernel doesn't
decode (only the client section is decoded).

Instead, let's drop this feature check.  It effectively checks for
luminous, so only pre-luminous OSDs would be affected in that on a PG
split the kernel might resend a request that should not have been
resent.  Duplicates can occur in other scenarios, so both sides should
already be prepared for them: see dup/replay logic on the OSD side and
retry_attempt check on the client side.

Cc: stable@vger.kernel.org
Fixes: 7de030d6b1 ("libceph: resend on PG splits if OSD has RESEND_ON_SPLIT")
Link: https://tracker.ceph.com/issues/41162
Reported-by: Jerry Lee <leisurelysw24@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Jerry Lee <leisurelysw24@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
2019-08-22 10:47:41 +02:00
Ilya Dryomov 4cf3e6dff7 libceph: export osd_req_op_data() macro
We already have one exported wrapper around it for extent.osd_data and
rbd_object_map_update_finish() needs another one for cls.request_data.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
2019-07-08 14:01:45 +02:00
Ilya Dryomov 68ada915ee libceph: change ceph_osdc_call() to take page vector for response
This will be used for loading object map.  rbd_obj_read_sync() isn't
suitable because object map must be accessed through class methods.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
2019-07-08 14:01:45 +02:00
Ilya Dryomov 94e8577188 libceph: rename r_unsafe_item to r_private_item
This list item remained from when we had safe and unsafe replies
(commit vs ack).  It has since become a private list item for use by
clients.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08 14:01:44 +02:00
Jeff Layton 51fc7ab445 libceph: fix watch_item_t decoding to use ceph_decode_entity_addr
While we're in there, let's also fix up the decoder to do proper
bounds checking.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08 14:01:43 +02:00
Linus Torvalds 1d9d7cbf28 On the filesystem side we have:
- a fix to enforce quotas set above the mount point (Luis Henriques)
 
 - support for exporting snapshots through NFS (Zheng Yan)
 
 - proper statx implementation (Jeff Layton).  statx flags are mapped
   to MDS caps, with AT_STATX_{DONT,FORCE}_SYNC taken into account.
 
 - some follow-up dentry name handling fixes, in particular elimination
   of our hand-rolled helper and the switch to __getname() as suggested
   by Al (Jeff Layton)
 
 - a set of MDS client cleanups in preparation for async MDS requests
   in the future (Jeff Layton)
 
 - a fix to sync the filesystem before remounting (Jeff Layton)
 
 On the rbd side, work is on-going on object-map and fast-diff image
 features.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlzdgEkTHGlkcnlvbW92
 QGdtYWlsLmNvbQAKCRBKf944AhHzi2w0B/9AsskuQezu8HP0NumCNfdgfI02r6d1
 1ZixMp6q8AAtOZYHP0bmiLzaETwC3+sRkD+8nX5DWuFISyjkTlRn8f7wnoziWkBT
 bBmL21fufkSKXN41VFCdolAbUPCKuA8+Fr7YE2hCl517ejbf47W+htv7+a56eTiR
 iAiDyVYokB8sj7WTVW6ET4HJTvJly1Z4QUNmy9Ljfzc8AvL2LFLOe6FRsJtIThdx
 aE00RX9EQsKO2v9ROd6jDmZocg50TvFmgF14A5GFfMmFrxJuri2yEI4iZd3hSKu2
 yZ+fBWmRy4E9w5E20qufrM+bSVjA+Zi7aiTMriaBm54aYtflgJ5gxhFI
 =68dZ
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-5.2-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "On the filesystem side we have:

   - a fix to enforce quotas set above the mount point (Luis Henriques)

   - support for exporting snapshots through NFS (Zheng Yan)

   - proper statx implementation (Jeff Layton). statx flags are mapped
     to MDS caps, with AT_STATX_{DONT,FORCE}_SYNC taken into account.

   - some follow-up dentry name handling fixes, in particular
     elimination of our hand-rolled helper and the switch to __getname()
     as suggested by Al (Jeff Layton)

   - a set of MDS client cleanups in preparation for async MDS requests
     in the future (Jeff Layton)

   - a fix to sync the filesystem before remounting (Jeff Layton)

  On the rbd side, work is on-going on object-map and fast-diff image
  features"

* tag 'ceph-for-5.2-rc1' of git://github.com/ceph/ceph-client: (29 commits)
  ceph: flush dirty inodes before proceeding with remount
  ceph: fix unaligned access in ceph_send_cap_releases
  libceph: make ceph_pr_addr take an struct ceph_entity_addr pointer
  libceph: fix unaligned accesses in ceph_entity_addr handling
  rbd: don't assert on writes to snapshots
  rbd: client_mutex is never nested
  ceph: print inode number in __caps_issued_mask debugging messages
  ceph: just call get_session in __ceph_lookup_mds_session
  ceph: simplify arguments and return semantics of try_get_cap_refs
  ceph: fix comment over ceph_drop_caps_for_unlink
  ceph: move wait for mds request into helper function
  ceph: have ceph_mdsc_do_request call ceph_mdsc_submit_request
  ceph: after an MDS request, do callback and completions
  ceph: use pathlen values returned by set_request_path_attr
  ceph: use __getname/__putname in ceph_mdsc_build_path
  ceph: use ceph_mdsc_build_path instead of clone_dentry_name
  ceph: fix potential use-after-free in ceph_mdsc_build_path
  ceph: dump granular cap info in "caps" debugfs file
  ceph: make iterate_session_caps a public symbol
  ceph: fix NULL pointer deref when debugging is enabled
  ...
2019-05-16 16:24:01 -07:00
Jeff Layton b726ec972c libceph: make ceph_pr_addr take an struct ceph_entity_addr pointer
GCC9 is throwing a lot of warnings about unaligned accesses by
callers of ceph_pr_addr. All of the current callers are passing a
pointer to the sockaddr inside struct ceph_entity_addr.

Fix it to take a pointer to a struct ceph_entity_addr instead,
and then have the function make a copy of the sockaddr before
printing it.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-05-07 19:43:05 +02:00
Sakari Ailus d75f773c86 treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
%pF and %pf are functionally equivalent to %pS and %ps conversion
specifiers. The former are deprecated, therefore switch the current users
to use the preferred variant.

The changes have been produced by the following command:

	git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \
	while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done

And verifying the result.

Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: sparclinux@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-nvdimm@lists.01.org
Cc: linux-pci@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-btrfs@vger.kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: linux-mm@kvack.org
Cc: ceph-devel@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: David Sterba <dsterba@suse.com> (for btrfs)
Acked-by: Mike Rapoport <rppt@linux.ibm.com> (for mm/memblock.c)
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-04-09 14:19:06 +02:00
Dongsheng Yang 02b2f549d5 libceph: allow setting abort_on_full for rbd
Introduce a new option abort_on_full, default to false. Then
we can get -ENOSPC when the pool is full, or reaches quota.

[ Don't show abort_on_full in /proc/mounts. ]

Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-01-07 22:47:48 +01:00
Luis Henriques 23ddf9bea9 libceph: support the RADOS copy-from operation
Add support for performing remote object copies using the 'copy-from'
operation.

[ Add COPY_FROM to get_num_data_items(). ]

Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:23 +02:00
Ilya Dryomov 98c4bfe9d8 libceph: check reply num_data_items in setup_request_data()
setup_request_data() adds message data items to both request and reply
messages, but only checks request num_data_items before proceeding with
the loop.  This is wrong because if an op doesn't have any request data
items but has a reply data item (e.g. read), a duplicate data item gets
added to the message on every resend attempt.

This went unnoticed for years but now that message data items are
preallocated, it promptly crashes in ceph_msg_data_add().  Amend the
signature to make it clear that setup_request_data() operates on both
request and reply messages.  Also, remove data_len assert -- we have
another one in prepare_write_message().

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:23 +02:00
Ilya Dryomov 0d9c1ab3be libceph: preallocate message data items
Currently message data items are allocated with ceph_msg_data_create()
in setup_request_data() inside send_request().  send_request() has never
been allowed to fail, so each allocation is followed by a BUG_ON:

  data = ceph_msg_data_create(...);
  BUG_ON(!data);

It's been this way since support for multiple message data items was
added in commit 6644ed7b7e ("libceph: make message data be a pointer")
in 3.10.

There is no reason to delay the allocation of message data items until
the last possible moment and we certainly don't need a linked list of
them as they are only ever appended to the end and never erased.  Make
ceph_msg_new2() take max_data_items and adapt the rest of the code.

Reported-by: Jerry Lee <leisurelysw24@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:22 +02:00
Ilya Dryomov 26f887e0a3 libceph, rbd, ceph: move ceph_osdc_alloc_messages() calls
The current requirement is that ceph_osdc_alloc_messages() should be
called after oid and oloc are known.  In preparation for preallocating
message data items, move ceph_osdc_alloc_messages() further down, so
that it is called when OSD op codes are known.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:22 +02:00
Ilya Dryomov 39e58c3425 libceph: introduce alloc_watch_request()
ceph_osdc_alloc_messages() call will be moved out of
alloc_linger_request() in the next commit, which means that
ceph_osdc_watch() will need to call ceph_osdc_alloc_messages()
twice.  Add a helper for that.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:22 +02:00
Ilya Dryomov 81c65213d7 libceph: assign cookies in linger_submit()
Register lingers directly in linger_submit().  This avoids allocating
memory for notify pagelist while holding osdc->lock and simplifies both
callers of linger_submit().

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:22 +02:00
Ilya Dryomov 3b83f60da6 libceph: enable fallback to ceph_msg_new() in ceph_msgpool_get()
ceph_msgpool_get() can fall back to ceph_msg_new() when it is asked for
a message whose front portion is larger than pool->front_len.  However
the caller always passes 0, effectively disabling that code path.  The
allocation goes to the message pool and returns a message with a front
that is smaller than requested, setting us up for a crash.

One example of this is a directory with a large number of snapshots.
If its snap context doesn't fit, we oops in encode_request_partial().

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:22 +02:00
Ilya Dryomov 41a264e1b3 libceph: no need to call osd_req_opcode_valid() in osd_req_encode_op()
Any uninitialized or unknown ops will be caught by the default clause
anyway.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:21 +02:00
Ilya Dryomov 894868330a libceph: don't consume a ref on pagelist in ceph_msg_data_add_pagelist()
Because send_mds_reconnect() wants to send a message with a pagelist
and pass the ownership to the messenger, ceph_msg_data_add_pagelist()
consumes a ref which is then put in ceph_msg_data_destroy().  This
makes managing pagelists in the OSD client (where they are wrapped in
ceph_osd_data) unnecessarily hard because the handoff only happens in
ceph_osdc_start_request() instead of when the pagelist is passed to
ceph_osd_data_pagelist_init().  I counted several memory leaks on
various error paths.

Fix up ceph_msg_data_add_pagelist() and carry a pagelist ref in
ceph_osd_data.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:21 +02:00
Ilya Dryomov 33165d4723 libceph: introduce ceph_pagelist_alloc()
struct ceph_pagelist cannot be embedded into anything else because it
has its own refcount.  Merge allocation and initialization together.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:21 +02:00
Ilya Dryomov 24639ce560 libceph: osd_req_op_cls_init() doesn't need to take opcode
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:20 +02:00
Ilya Dryomov 6daca13d2e libceph: add authorizer challenge
When a client authenticates with a service, an authorizer is sent with
a nonce to the service (ceph_x_authorize_[ab]) and the service responds
with a mutation of that nonce (ceph_x_authorize_reply).  This lets the
client verify the service is who it says it is but it doesn't protect
against a replay: someone can trivially capture the exchange and reuse
the same authorizer to authenticate themselves.

Allow the service to reject an initial authorizer with a random
challenge (ceph_x_authorize_challenge).  The client then has to respond
with an updated authorizer proving they are able to decrypt the
service's challenge and that the new authorizer was produced for this
specific connection instance.

The accepting side requires this challenge and response unconditionally
if the client side advertises they have CEPHX_V2 feature bit.

This addresses CVE-2018-1128.

Link: http://tracker.ceph.com/issues/24836
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02 21:33:24 +02:00
Arnd Bergmann fac02ddf91 libceph: use timespec64 for r_mtime
The request mtime field is used all over ceph, and is currently
represented as a 'timespec' structure in Linux. This changes it to
timespec64 to allow times beyond 2038, modifying all users at the
same time.

[ Remove now redundant ts variable in writepage_nounlock(). ]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:33:14 +02:00
Ilya Dryomov 6d54228fd1 libceph: make ceph_osdc_notify{,_ack}() payload_len u32
The wire format dictates that payload_len fits into 4 bytes.  Take u32
instead of size_t to reflect that.

All callers pass a small integer, so no changes required.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:26:11 +02:00
Linus Torvalds dc594c39f7 The main piece is a set of libceph changes that revamps how OSD
requests are aborted, improving CephFS ENOSPC handling and making
 "umount -f" actually work (Zheng and myself).  The rest is mostly
 mount option handling cleanups from Chengguang and assorted fixes
 from Zheng, Luis and Dongsheng.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJbIkigAAoJEEp/3jgCEfOL3EUH/1s7Ib3FgFzG/SPPKISxZOGr
 ndZGg0rPT9mPIQ4rp6t0z/cDlMrluPmCK3sWrAPe//sZz9iZiuip+mCL0gUFXFNr
 1kL2xDKkJzGxtP3UlUvr5CC6bnxLdeBXJRBDLk/swtphuqArKndlbN/iLZnCZivT
 uJDk+vZTwNJ3UhQP4QdnOQLV60NYs+q4euTqbZF3+pDiRiONbxRfXC3adFsc8zL9
 zlie3CHPbrQHWMsfNvbfM3rBH1WhTwEssDm+IEFlKl19q9SKP2WPZfmBcE1pmZ58
 AhIMoNGdQha1FXS6N96kaPaqFgeysPnEPoyHDqLxsUMKqsvJlOEZsK1jujza4rE=
 =EfXm
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-4.18-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "The main piece is a set of libceph changes that revamps how OSD
  requests are aborted, improving CephFS ENOSPC handling and making
  "umount -f" actually work (Zheng and myself).

  The rest is mostly mount option handling cleanups from Chengguang and
  assorted fixes from Zheng, Luis and Dongsheng.

* tag 'ceph-for-4.18-rc1' of git://github.com/ceph/ceph-client: (31 commits)
  rbd: flush rbd_dev->watch_dwork after watch is unregistered
  ceph: update description of some mount options
  ceph: show ino32 if the value is different with default
  ceph: strengthen rsize/wsize/readdir_max_bytes validation
  ceph: fix alignment of rasize
  ceph: fix use-after-free in ceph_statfs()
  ceph: prevent i_version from going back
  ceph: fix wrong check for the case of updating link count
  libceph: allocate the locator string with GFP_NOFAIL
  libceph: make abort_on_full a per-osdc setting
  libceph: don't abort reads in ceph_osdc_abort_on_full()
  libceph: avoid a use-after-free during map check
  libceph: don't warn if req->r_abort_on_full is set
  libceph: use for_each_request() in ceph_osdc_abort_on_full()
  libceph: defer __complete_request() to a workqueue
  libceph: move more code into __complete_request()
  libceph: no need to call flush_workqueue() before destruction
  ceph: flush pending works before shutdown super
  ceph: abort osd requests on force umount
  libceph: introduce ceph_osdc_abort_requests()
  ...
2018-06-15 07:24:58 +09:00
Linus Torvalds 2857676045 - Introduce arithmetic overflow test helper functions (Rasmus)
- Use overflow helpers in 2-factor allocators (Kees, Rasmus)
 - Introduce overflow test module (Rasmus, Kees)
 - Introduce saturating size helper functions (Matthew, Kees)
 - Treewide use of struct_size() for allocators (Kees)
 -----BEGIN PGP SIGNATURE-----
 Comment: Kees Cook <kees@outflux.net>
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAlsYJ1gWHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJlCTEACwdEeriAd2VwxknnsstojGD/3g
 8TTFA19vSu4Gxa6WiDkjGoSmIlfhXTlZo1Nlmencv16ytSvIVDNLUIB3uDxUIv1J
 2+dyHML9JpXYHHR7zLXXnGFJL0wazqjbsD3NYQgXqmun7EVVYnOsAlBZ7h/Lwiej
 jzEJd8DaHT3TA586uD3uggiFvQU0yVyvkDCDONIytmQx+BdtGdg9TYCzkBJaXuDZ
 YIthyKDvxIw5nh/UaG3L+SKo73tUr371uAWgAfqoaGQQCWe+mxnWL4HkCKsjFzZL
 u9ouxxF/n6pij3E8n6rb0i2fCzlsTDdDF+aqV1rQ4I4hVXCFPpHUZgjDPvBWbj7A
 m6AfRHVNnOgI8HGKqBGOfViV+2kCHlYeQh3pPW33dWzy/4d/uq9NIHKxE63LH+S4
 bY3oO2ela8oxRyvEgXLjqmRYGW1LB/ZU7FS6Rkx2gRzo4k8Rv+8K/KzUHfFVRX61
 jEbiPLzko0xL9D53kcEn0c+BhofK5jgeSWxItdmfuKjLTW4jWhLRlU+bcUXb6kSS
 S3G6aF+L+foSUwoq63AS8QxCuabuhreJSB+BmcGUyjthCbK/0WjXYC6W/IJiRfBa
 3ZTxBC/2vP3uq/AGRNh5YZoxHL8mSxDfn62F+2cqlJTTKR/O+KyDb1cusyvk3H04
 KCDVLYPxwQQqK1Mqig==
 =/3L8
 -----END PGP SIGNATURE-----

Merge tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull overflow updates from Kees Cook:
 "This adds the new overflow checking helpers and adds them to the
  2-factor argument allocators. And this adds the saturating size
  helpers and does a treewide replacement for the struct_size() usage.
  Additionally this adds the overflow testing modules to make sure
  everything works.

  I'm still working on the treewide replacements for allocators with
  "simple" multiplied arguments:

     *alloc(a * b, ...) -> *alloc_array(a, b, ...)

  and

     *zalloc(a * b, ...) -> *calloc(a, b, ...)

  as well as the more complex cases, but that's separable from this
  portion of the series. I expect to have the rest sent before -rc1
  closes; there are a lot of messy cases to clean up.

  Summary:

   - Introduce arithmetic overflow test helper functions (Rasmus)

   - Use overflow helpers in 2-factor allocators (Kees, Rasmus)

   - Introduce overflow test module (Rasmus, Kees)

   - Introduce saturating size helper functions (Matthew, Kees)

   - Treewide use of struct_size() for allocators (Kees)"

* tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  treewide: Use struct_size() for devm_kmalloc() and friends
  treewide: Use struct_size() for vmalloc()-family
  treewide: Use struct_size() for kmalloc()-family
  device: Use overflow helpers for devm_kmalloc()
  mm: Use overflow helpers in kvmalloc()
  mm: Use overflow helpers in kmalloc_array*()
  test_overflow: Add memory allocation overflow tests
  overflow.h: Add allocation size calculation helpers
  test_overflow: Report test failures
  test_overflow: macrofy some more, do more tests for free
  lib: add runtime test of check_*_overflow functions
  compiler.h: enable builtin overflow checkers and add fallback code
2018-06-06 17:27:14 -07:00
Kees Cook acafe7e302 treewide: Use struct_size() for kmalloc()-family
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
    int stuff;
    void *entry[];
};

instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);

This patch makes the changes for kmalloc()-family (and kvmalloc()-family)
uses. It was done via automatic conversion with manual review for the
"CHECKME" non-standard cases noted below, using the following Coccinelle
script:

// pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len *
//                      sizeof *pkey_cache->table, GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@

- alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)

// mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@

- alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)

// Same pattern, but can't trivially locate the trailing element name,
// or variable name.
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
expression SOMETHING, COUNT, ELEMENT;
@@

- alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP)
+ alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-06 11:15:43 -07:00
Ilya Dryomov a86f009f10 libceph: allocate the locator string with GFP_NOFAIL
calc_target() isn't supposed to fail with anything but POOL_DNE, in
which case we report that the pool doesn't exist and fail the request
with -ENOENT.  Doing this for -ENOMEM is at the very least confusing
and also harmful -- as the preceding requests complete, a short-lived
locator string allocation is likely to succeed after a wait.

(We used to call ceph_object_locator_to_pg() for a pi lookup.  In
theory that could fail with -ENOENT, hence the "ret != -ENOENT" warning
being removed.)

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-06-04 20:46:00 +02:00
Ilya Dryomov c843d13cae libceph: make abort_on_full a per-osdc setting
The intent behind making it a per-request setting was that it would be
set for writes, but not for reads.  As it is, the flag is set for all
fs/ceph requests except for pool perm check stat request (technically
a read).

ceph_osdc_abort_on_full() skips reads since the previous commit and
I don't see a use case for marking individual requests.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-06-04 20:46:00 +02:00
Ilya Dryomov 690f951d7e libceph: don't abort reads in ceph_osdc_abort_on_full()
Don't consider reads for aborting and use ->base_oloc instead of
->target_oloc, as done in __submit_request().

Strictly speaking, we shouldn't be aborting FULL_TRY/FULL_FORCE writes
either.  But, there is an inconsistency in FULL_TRY/FULL_FORCE handling
on the OSD side [1], so given that neither of these is used in the
kernel client, leave it for when the OSD behaviour is sorted out.

[1] http://tracker.ceph.com/issues/24339

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-06-04 20:45:59 +02:00
Ilya Dryomov 6001567c14 libceph: avoid a use-after-free during map check
Sending map check after complete_request() was called is not only
useless, but can lead to a use-after-free as req->r_kref decrement in
__complete_request() races with map check code.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-06-04 20:45:59 +02:00
Ilya Dryomov 29e878201e libceph: don't warn if req->r_abort_on_full is set
The "FULL or reached pool quota" warning is there to explain paused
requests.  No need to emit it if pausing isn't going to occur.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-06-04 20:45:58 +02:00
Ilya Dryomov 4eea0fefd7 libceph: use for_each_request() in ceph_osdc_abort_on_full()
Scanning the trees just to see if there is anything to abort is
unnecessary -- all that is needed here is to update the epoch barrier
first, before we start aborting.  Simplify and do the update inside the
loop before calling abort_request() for the first time.

The switch to for_each_request() also fixes a bug: homeless requests
weren't even considered for aborting.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-06-04 20:45:58 +02:00
Ilya Dryomov 88bc1922c2 libceph: defer __complete_request() to a workqueue
In the common case, req->r_callback is called by handle_reply() on the
ceph-msgr worker thread without any locks.  If handle_reply() fails, it
is called with both osd->lock and osdc->lock.  In the map check case,
it is called with just osdc->lock but held for write.  Finally, if the
request is aborted because of -ENOSPC or by ceph_osdc_abort_requests(),
it is called directly on the submitter's thread, again with both locks.

req->r_callback on the submitter's thread is relatively new (introduced
in 4.12) and ripe for deadlocks -- e.g. writeback worker thread waiting
on itself:

  inode_wait_for_writeback+0x26/0x40
  evict+0xb5/0x1a0
  iput+0x1d2/0x220
  ceph_put_wrbuffer_cap_refs+0xe0/0x2c0 [ceph]
  writepages_finish+0x2d3/0x410 [ceph]
  __complete_request+0x26/0x60 [libceph]
  complete_request+0x2e/0x70 [libceph]
  __submit_request+0x256/0x330 [libceph]
  submit_request+0x2b/0x30 [libceph]
  ceph_osdc_start_request+0x25/0x40 [libceph]
  ceph_writepages_start+0xdfe/0x1320 [ceph]
  do_writepages+0x1f/0x70
  __writeback_single_inode+0x45/0x330
  writeback_sb_inodes+0x26a/0x600
  __writeback_inodes_wb+0x92/0xc0
  wb_writeback+0x274/0x330
  wb_workfn+0x2d5/0x3b0

Defer __complete_request() to a workqueue in all failure cases so it's
never on the same thread as ceph_osdc_start_request() and always called
with no locks held.

Link: http://tracker.ceph.com/issues/23978
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-06-04 20:45:58 +02:00
Ilya Dryomov 26df726bcd libceph: move more code into __complete_request()
Move req->r_completion wake up and req->r_kref decrement into
__complete_request().

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-06-04 20:45:58 +02:00
Ilya Dryomov 0d09c57d08 libceph: no need to call flush_workqueue() before destruction
destroy_workqueue() drains the workqueue before proceeding with
destruction.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-06-04 20:45:57 +02:00
Ilya Dryomov 66850df585 libceph: introduce ceph_osdc_abort_requests()
This will be used by the filesystem for "umount -f".

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-06-04 20:45:57 +02:00
Chengguang Xu fe943d5042 libceph, rbd: add error handling for osd_req_op_cls_init()
Add proper error handling for osd_req_op_cls_init() to replace
BUG_ON statement when failing from memory allocation.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-06-04 20:45:54 +02:00
Ilya Dryomov 0010f7052d libceph: add osd_req_op_extent_osd_data_bvecs()
... and store num_bvecs for client code's convenience.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-05-10 10:15:05 +02:00
Chengguang Xu 57a35dfb52 libceph, ceph: add __init attribution to init funcitons
Add __init attribution to the functions which are called only once
during initiating/registering operations and deleting unnecessary
symbol exports.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02 10:12:48 +02:00
Ilya Dryomov 08c1ac508b libceph, ceph: move ceph_calc_file_object_mapping() to striper.c
ceph_calc_file_object_mapping() has nothing to do with osdmaps.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02 10:12:43 +02:00
Ilya Dryomov b9e281c2b3 libceph: introduce BVECS data type
In preparation for rbd "fancy" striping, introduce ceph_bvec_iter for
working with bio_vec array data buffers.  The wrappers are trivial, but
make it look similar to ceph_bio_iter.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02 10:12:39 +02:00