The queue is marked not empty after acquiring the seqlock,
and it's up to the NOLOCK qdisc clearing such flag on dequeue.
Since the empty status lays on the same cache-line of the
seqlock, it's always hot on cache during the updates.
This makes the empty flag update a little bit loosy. Given
the lack of synchronization between enqueue and dequeue, this
is unavoidable.
v2 -> v3:
- qdisc_is_empty() has a const argument (Eric)
v1 -> v2:
- use really an 'empty' flag instead of 'not_empty', as
suggested by Eric
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add documentation to the tcp_ca_state enum, since this enum is
exposed in uapi.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Sowmini Varadhan <sowmini05@gmail.com>
Acked-by: Sowmini Varadhan <sowmini05@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since maxattr is common, the policy can't really differ sanely,
so make it common as well.
The only user that did in fact manage to make a non-common policy
is taskstats, which has to be really careful about it (since it's
still using a common maxattr!). This is no longer supported, but
we can fake it using pre_doit.
This reduces the size of e.g. nl80211.o (which has lots of commands):
text data bss dec hex filename
398745 14323 2240 415308 6564c net/wireless/nl80211.o (before)
397913 14331 2240 414484 65314 net/wireless/nl80211.o (after)
--------------------------------
-832 +8 0 -824
Which is obviously just 8 bytes for each command, and an added 8
bytes for the new policy pointer. I'm not sure why the ops list is
counted as .text though.
Most of the code transformations were done using the following spatch:
@ops@
identifier OPS;
expression POLICY;
@@
struct genl_ops OPS[] = {
...,
{
- .policy = POLICY,
},
...
};
@@
identifier ops.OPS;
expression ops.POLICY;
identifier fam;
expression M;
@@
struct genl_family fam = {
.ops = OPS,
.maxattr = M,
+ .policy = POLICY,
...
};
This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing
the cb->data as ops, which we want to change in a later genl patch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The pattern set by list.h is that for_each..continue()
iterators start at the next entry after the given one,
while for_each..from() iterators start at the given
entry.
The rht_for_each*continue() iterators are documented as though the
start at the 'next' entry, but actually start at the given entry,
and they are used expecting that behaviour.
So fix the documentation and change the names to *from for consistency
with list.h
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rhashtable_try_insert() currently holds a lock on the bucket in
the first table, while also locking buckets in subsequent tables.
This is unnecessary and looks like a hold-over from some earlier
version of the implementation.
As insert and remove always lock a bucket in each table in turn, and
as insert only inserts in the final table, there cannot be any races
that are not covered by simply locking a bucket in each table in turn.
When an insert call reaches that last table it can be sure that there
is no matchinf entry in any other table as it has searched them all, and
insertion never happens anywhere but in the last table. The fact that
code tests for the existence of future_tbl while holding a lock on
the relevant bucket ensures that two threads inserting the same key
will make compatible decisions about which is the "last" table.
This simplifies the code and allows the ->rehash field to be
discarded.
We still need a way to ensure that a dead bucket_table is never
re-linked by rhashtable_walk_stop(). This can be achieved by calling
call_rcu() inside the locked region, and checking with
rcu_head_after_call_rcu() in rhashtable_walk_stop() to see if the
bucket table is empty and dead.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Get rid of some obsolete gc-related documentation and macros that were
missed in commit 5b7c9a8ff8 ("net: remove dst gc related code").
CC: Wei Wang <weiwan@google.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fib_trie implementation calls synchronize_rcu when a certain amount of
pages are dirty from freed entries. The number of pages was determined
experimentally in 2009 (commit c3059477fc).
At the current setting, synchronize_rcu is called often -- 51 times in a
second in one test with an average of an 8 msec delay adding a fib entry.
The total impact is a lot of slow down modifying the fib. This is seen
in the output of 'time' - the difference between real time and sys+user.
For example, using 720,022 single path routes and 'ip -batch'[1]:
$ time ./ip -batch ipv4/routes-1-hops
real 0m14.214s
user 0m2.513s
sys 0m6.783s
So roughly 35% of the actual time to install the routes is from the ip
command getting scheduled out, most notably due to synchronize_rcu (this
is observed using 'perf sched timehist').
This patch makes the amount of dirty memory configurable between 64k where
the synchronize_rcu is called often (small, low end systems that are memory
sensitive) to 64M where synchronize_rcu is called rarely during a large
FIB change (for high end systems with lots of memory). The default is 512kB
which corresponds to the current setting of 128 pages with a 4kB page size.
As an example, at 16MB the worst interval shows 4 calls to synchronize_rcu
in a second blocking for up to 30 msec in a single instance, and a total
of almost 100 msec across the 4 calls in the second. The trade off is
allowing FIB entries to consume more memory in a given time window but
but with much better fib insertion rates (~30% increase in prefixes/sec).
With this patch and net.ipv4.fib_sync_mem set to 16MB, the same batch
file runs in:
$ time ./ip -batch ipv4/routes-1-hops
real 0m9.692s
user 0m2.491s
sys 0m6.769s
So the dead time is reduced to about 1/2 second or <5% of the real time.
[1] 'ip' modified to not request ACK messages which improves route
insertion times by about 20%
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit f2780d6d74 "tun: Add ioctl() SIOCGSKNS cmd to allow
obtaining net ns of tun device" it was missed that tun may change
its net ns, while net ns of socket remains the same as it was
created initially. SIOCGSKNS returns net ns of socket, so it is
not suitable for obtaining net ns of device.
We may have two tun devices with the same names in two net ns,
and in this case it's not possible to determ, which of them
fd refers to (TUNGETIFF will return the same name).
This patch adds new ioctl() cmd for obtaining net ns of a device.
Reported-by: Harald Albrecht <harald.albrecht@gmx.net>
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change addrconf_f6i_alloc to generate a fib6_config and call
ip6_route_info_create. addrconf_f6i_alloc is the last caller to
fib6_info_alloc besides ip6_route_info_create, and there is no
reason for it to do its own initialization on a fib6_info.
Host routes need to be created even if the device is down, so add a
new flag, fc_ignore_dev_down, to fib6_config and update fib6_nh_init
to not error out if device is not up.
Notes on the conversion:
- ip_fib_metrics_init is the same as fib6_config has fc_mx set to NULL
and fc_mx_len set to 0
- dst_nocount is handled by the RTF_ADDRCONF flag
- dst_host is handled by fc_dst_len = 128
nh_gw does not get set after the conversion to ip6_route_info_create
but it should not be set in addrconf_f6i_alloc since this is a host
route not a gateway route.
Everything else is a straight forward map between fib6_info and
fib6_config.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In addition to icmp_echo_ignore_multicast, there is a need to also
prevent responding to pings to anycast addresses for security.
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the previous patch, all the callers of ndo_select_queue()
provide as a 'fallback' argument netdev_pick_tx.
The only exceptions are nested calls to ndo_select_queue(),
which pass down the 'fallback' available in the current scope
- still netdev_pick_tx.
We can drop such argument and replace fallback() invocation with
netdev_pick_tx(). This avoids an indirect call per xmit packet
in some scenarios (TCP syn, UDP unconnected, XDP generic, pktgen)
with device drivers implementing such ndo. It also clean the code
a bit.
Tested with ixgbe and CONFIG_FCOE=m
With pktgen using queue xmit:
threads vanilla patched
(kpps) (kpps)
1 2334 2428
2 4166 4278
4 7895 8100
v1 -> v2:
- rebased after helper's name change
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently packet_pick_tx_queue() is the only caller of
ndo_select_queue() using a fallback argument other than
netdev_pick_tx.
Leveraging rx queue, we can obtain a similar queue selection
behavior using core helpers. After this change, ndo_select_queue()
is always invoked with netdev_pick_tx() as fallback.
We can change ndo_select_queue() signature in a followup patch,
dropping an indirect call per transmitted packet in some scenarios
(e.g. TCP syn and XDP generic xmit)
This changes slightly how af packet queue selection happens when
PACKET_QDISC_BYPASS is set. It's now more similar to plan dev_queue_xmit()
tacking in account both XPS and TC mapping.
v1 -> v2:
- rebased after helper name change
RFC -> v1:
- initialize sender_cpu to the expected value
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the following patches, we are going to use __netdev_pick_tx() in
many modules. Rename it to netdev_pick_tx(), to make it clear is
a public API.
Also rename the existing netdev_pick_tx() to netdev_core_pick_tx(),
to avoid name clashes.
Suggested-by: Eric Dumazet <edumazet@google.com>
Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Added support for AES128-CCM based record encryption. AES128-CCM is
similar to AES128-GCM. Both of them have same salt/iv/mac size. The
notable difference between the two is that while invoking AES128-CCM
operation, the salt||nonce (which is passed as IV) has to be prefixed
with a hardcoded value '2'. Further, CCM implementation in kernel
requires IV passed in crypto_aead_request() to be full '16' bytes.
Therefore, the record structure 'struct tls_rec' has been modified to
reserve '16' bytes for IV. This works for both GCM and CCM based cipher.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPv4 has icmp_echo_ignore_broadcast to prevent responding to broadcast pings.
IPv6 needs a similar mechanism.
v1->v2:
- Remove NET_IPV6_ICMP_ECHO_IGNORE_MULTICAST.
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the request socket is created locally, it'd make more sense to
use reqsk_free() instead of reqsk_put() in TFO and syncookies' error
path.
However, tcp_get_cookie_sock() may set ->rsk_refcnt before freeing the
socket; tcp_conn_request() may also have non-null ->rsk_refcnt because
of tcp_try_fastopen(). In both cases 'req' hasn't been exposed
to the outside world and is safe to free immediately, but that'd
trigger the WARN_ON_ONCE in reqsk_free().
Define __reqsk_free() for these situations where we know nobody's
referencing the socket, even though ->rsk_refcnt might be non-null.
Now we can consolidate the error path of tcp_get_cookie_sock() and
tcp_conn_request().
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, a multicast stream uses either broadcast or replicast as
transmission method, based on the ratio between number of actual
destinations nodes and cluster size.
However, when an L2 interface (e.g., VXLAN) provides pseudo
broadcast support, this becomes very inefficient, as it blindly
replicates multicast packets to all cluster/subnet nodes,
irrespective of whether they host actual target sockets or not.
The TIPC multicast algorithm is able to distinguish real destination
nodes from other nodes, and hence provides a smarter and more
efficient method for transferring multicast messages than
pseudo broadcast can do.
Because of this, we now make it possible for users to force
the broadcast link to permanently switch to using replicast,
irrespective of which capabilities the bearer provides,
or pretend to provide.
Conversely, we also make it possible to force the broadcast link
to always use true broadcast. While maybe less useful in
deployed systems, this may at least be useful for testing the
broadcast algorithm in small clusters.
We retain the current AUTOSELECT ability, i.e., to let the broadcast link
automatically select which algorithm to use, and to switch back and forth
between broadcast and replicast as the ratio between destination
node number and cluster size changes. This remains the default method.
Furthermore, we make it possible to configure the threshold ratio for
such switches. The default ratio is now set to 10%, down from 25% in the
earlier implementation.
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
sctp_hdr(skb) only works when skb->transport_header is set properly.
But in Netfilter, skb->transport_header for ipv6 is not guaranteed
to be right value for sctphdr. It would cause to fail to check the
checksum for sctp packets.
So fix it by using offset, which is always right in all places.
v1->v2:
- Fix the changelog.
Fixes: e6d8b64b34 ("net: sctp: fix and consolidate SCTP checksumming code")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using fanouts with AF_PACKET, the demux functions such as
fanout_demux_cpu will return an index in the fanout socket array, which
corresponds to the selected socket.
The ordering of this array depends on the order the sockets were added
to a given fanout group, so for FANOUT_CPU this means sockets are bound
to cpus in the order they are configured, which is OK.
However, when stopping then restarting the interface these sockets are
bound to, the sockets are reassigned to the fanout group in the reverse
order, due to the fact that they were inserted at the head of the
interface's AF_PACKET socket list.
This means that traffic that was directed to the first socket in the
fanout group is now directed to the last one after an interface restart.
In the case of FANOUT_CPU, traffic from CPU0 will be directed to the
socket that used to receive traffic from the last CPU after an interface
restart.
This commit introduces a helper to add a socket at the tail of a list,
then uses it to register AF_PACKET sockets.
Note that this changes the order in which sockets are listed in /proc and
with sock_diag.
Fixes: dc99f60069 ("packet: Add fanout support")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2019-03-16
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a umem memory leak on cleanup in AF_XDP, from Björn.
2) Fix BTF to properly resolve forward-declared enums into their corresponding
full enum definition types during deduplication, from Andrii.
3) Fix libbpf to reject invalid flags in xsk_socket__create(), from Magnus.
4) Fix accessing invalid pointer returned from bpf_tcp_sock() and
bpf_sk_fullsock() after bpf_sk_release() was called, from Martin.
5) Fix generation of load/store DW instructions in PPC JIT, from Naveen.
6) Various fixes in BPF helper function documentation in bpf.h UAPI header
used to bpf-helpers(7) man page, from Quentin.
7) Fix segfault in BPF test_progs when prog loading failed, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When the umem is cleaned up, the task that created it might already be
gone. If the task was gone, the xdp_umem_release function did not free
the pages member of struct xdp_umem.
It turned out that the task lookup was not needed at all; The code was
a left-over when we moved from task accounting to user accounting [1].
This patch fixes the memory leak by removing the task lookup logic
completely.
[1] https://lore.kernel.org/netdev/20180131135356.19134-3-bjorn.topel@gmail.com/
Link: https://lore.kernel.org/netdev/c1cb2ca8-6a14-3980-8672-f3de0bb38dfd@suse.cz/
Fixes: c0c77d8fb7 ("xsk: add user memory registration support sockopt")
Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Adds missing sphinx documentation to the
socket.c's functions. Also fixes some whitespaces.
I also changed the style of older documentation as an
effort to have an uniform documentation style.
Signed-off-by: Pedro Tammela <pctammela@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
register_snap_client may return NULL, all the callers
check it, but only print a warning. This will result in
NULL pointer dereference in unregister_snap_client and other
places.
It has always been used like this since v2.6
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge misc patches from Andrew Morton:
- a little bit more MM
- a few fixups
[ The "little bit more MM" is actually just one of the three patches
Andrew sent for mm/filemap.c, I'm still mulling over two more of them
from Josef Bacik - Linus ]
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
include/linux/swap.h: use offsetof() instead of custom __swapoffset macro
tools/testing/selftests/proc/proc-pid-vm.c: test with vsyscall in mind
zram: default to lzo-rle instead of lzo
filemap: pass vm_fault to the mmap ra helpers
Use offsetof() to calculate offset of a field to take advantage of
compiler built-in version when possible, and avoid UBSAN warning when
compiling with Clang:
UBSAN: Undefined behaviour in mm/swapfile.c:3010:38
member access within null pointer of type 'union swap_header'
CPU: 6 PID: 1833 Comm: swapon Tainted: G S 4.19.23 #43
Call trace:
dump_backtrace+0x0/0x194
show_stack+0x20/0x2c
__dump_stack+0x20/0x28
dump_stack+0x70/0x94
ubsan_epilogue+0x14/0x44
ubsan_type_mismatch_common+0xf4/0xfc
__ubsan_handle_type_mismatch_v1+0x34/0x54
__se_sys_swapon+0x654/0x1084
__arm64_sys_swapon+0x1c/0x24
el0_svc_common+0xa8/0x150
el0_svc_compat_handler+0x2c/0x38
el0_svc_compat+0x8/0x18
Link: http://lkml.kernel.org/r/20190312081902.223764-1-pihsun@chromium.org
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add documentation for the BPF spinlock-related helpers to the doc in
bpf.h. I added the constraints and restrictions coming with the use of
spinlocks for BPF: not all of it is directly related to the use of the
helper, but I thought it would be nice for users to find them in the man
page.
This list of restrictions is nearly a verbatim copy of the list in
Alexei's commit log for those helpers.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Another round of minor fixes for the documentation of the BPF helpers
located in the UAPI bpf.h header file. Changes include:
- Moving around description of some helpers, to keep the descriptions in
the same order as helpers are declared (bpf_map_push_elem(), leftover
from commit 90b1023f68 ("bpf: fix documentation for eBPF helpers"),
bpf_rc_keydown(), and bpf_skb_ancestor_cgroup_id()).
- Fixing typos ("contex" -> "context").
- Harmonising return types ("void* " -> "void *", "uint64_t" -> "u64").
- Addition of the "bpf_" prefix to bpf_get_storage().
- Light additions of RST markup on some keywords.
- Empty line deletion between description and return value for
bpf_tcp_sock().
- Edit for the description for bpf_skb_ecn_set_ce() (capital letters,
acronym expansion, no effect if ECT not set, more details on return
value).
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Fix registration of new cpuidle governors partially broken during
the 5.0 development cycle by mistake (Rafael Wysocki).
- Avoid integer overflows in the menu cpuidle governor by making
it discard the overflowing data points upfront (Rafael Wysocki).
- Fix minor mistake in the recent update of the iowait boost
computation in the intel_pstate driver (Rafael Wysocki).
- Drop incorrect __init annotation from one function in the pxa2xx
cpufreq driver (Arnd Bergmann).
- Fix the operating performance points (OPP) framework
initialization for devices in multiple power domains if
only one of them is scalable (Rajendra Nayak).
- Fix mistake in dev_pm_opp_set_rate() which causes it to skip
updating the performance state if the new frequency is the same
as the old one (Viresh Kumar).
- Rework the cancellation of wakeup source timers to avoid
potential issues with it and do some cleanups unlocked by
that change (Viresh Kumar, Rafael Wysocki).
- Clean up the code computing the active/suspended time of devices
in the PM-runtime framework after recent changes (Ulf Hansson).
- Make the power management infrastructure code use pr_fmt()
consistently (Joe Perches).
- Clean up the generic power domains (genpd) framework somewhat
(Aisheng Dong).
- Improve kerneldoc comments for two functions in the cpufreq core
(Rafael Wysocki).
- Fix typo in a PM QoS file description comment (Aisheng Dong).
- Update the handling of CPU boost frequencies in the cpupower
utility (Abhishek Goel).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=fHRq
-----END PGP SIGNATURE-----
Merge tag 'pm-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are mostly fixes and cleanups on top of the previously merged
power management material for 5.1-rc1 with one cpupower utility update
that wasn't pushed earlier due to unfortunate timing.
Specifics:
- Fix registration of new cpuidle governors partially broken during
the 5.0 development cycle by mistake (Rafael Wysocki).
- Avoid integer overflows in the menu cpuidle governor by making it
discard the overflowing data points upfront (Rafael Wysocki).
- Fix minor mistake in the recent update of the iowait boost
computation in the intel_pstate driver (Rafael Wysocki).
- Drop incorrect __init annotation from one function in the pxa2xx
cpufreq driver (Arnd Bergmann).
- Fix the operating performance points (OPP) framework initialization
for devices in multiple power domains if only one of them is
scalable (Rajendra Nayak).
- Fix mistake in dev_pm_opp_set_rate() which causes it to skip
updating the performance state if the new frequency is the same as
the old one (Viresh Kumar).
- Rework the cancellation of wakeup source timers to avoid potential
issues with it and do some cleanups unlocked by that change (Viresh
Kumar, Rafael Wysocki).
- Clean up the code computing the active/suspended time of devices in
the PM-runtime framework after recent changes (Ulf Hansson).
- Make the power management infrastructure code use pr_fmt()
consistently (Joe Perches).
- Clean up the generic power domains (genpd) framework somewhat
(Aisheng Dong).
- Improve kerneldoc comments for two functions in the cpufreq core
(Rafael Wysocki).
- Fix typo in a PM QoS file description comment (Aisheng Dong).
- Update the handling of CPU boost frequencies in the cpupower
utility (Abhishek Goel)"
* tag 'pm-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: governor: Add new governors to cpuidle_governors again
cpufreq: intel_pstate: Fix up iowait_boost computation
PM / OPP: Update performance state when freq == old_freq
PM / wakeup: Drop wakeup_source_drop()
PM / wakeup: Rework wakeup source timer cancellation
PM / domains: Remove one unnecessary blank line
PM / Domains: Return early for all errors in _genpd_power_off()
PM / Domains: Improve warn for multiple states but no governor
OPP: Fix handling of multiple power domains
PM / QoS: Fix typo in file description
cpufreq: pxa2xx: remove incorrect __init annotation
PM-runtime: Call pm_runtime_active|suspended_time() from sysfs
PM-runtime: Consolidate code to get active/suspended time
PM: Add and use pr_fmt()
cpufreq: Improve kerneldoc comments for cpufreq_cpu_get/put()
cpuidle: menu: Avoid overflows when computing variance
tools/power/cpupower: Display boost frequency separately
Pull networking fixes from David Miller:
"More fixes in the queue:
1) Netfilter nat can erroneously register the device notifier twice,
fix from Florian Westphal.
2) Use after free in nf_tables, from Pablo Neira Ayuso.
3) Parallel update of steering rule fix in mlx5 river, from Eli
Britstein.
4) RX processing panic in lan743x, fix from Bryan Whitehead.
5) Use before initialization of TCP_SKB_CB, fix from Christoph Paasch.
6) Fix locking in SRIOV mode of mlx4 driver, from Jack Morgenstein.
7) Fix TX stalls in lan743x due to mishandling of interrupt ACKing
modes, from Bryan Whitehead.
8) Fix infoleak in l2tp_ip6_recvmsg(), from Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
pptp: dst_release sk_dst_cache in pptp_sock_destruct
MAINTAINERS: GENET & SYSTEMPORT: Add internal Broadcom list
l2tp: fix infoleak in l2tp_ip6_recvmsg()
net/tls: Inform user space about send buffer availability
net_sched: return correct value for *notify* functions
lan743x: Fix TX Stall Issue
net/mlx4_core: Fix qp mtt size calculation
net/mlx4_core: Fix locking in SRIOV mode when switching between events and polling
net/mlx4_core: Fix reset flow when in command polling mode
mlxsw: minimal: Initialize base_mac
mlxsw: core: Prevent duplication during QSFP module initialization
net: dwmac-sun8i: fix a missing check of of_get_phy_mode
net: sh_eth: fix a missing check of of_get_phy_mode
net: 8390: fix potential NULL pointer dereferences
net: fujitsu: fix a potential NULL pointer dereference
net: qlogic: fix a potential NULL pointer dereference
isdn: hfcpci: fix potential NULL pointer dereference
Documentation: devicetree: add a new optional property for port mac address
net: rocker: fix a potential NULL pointer dereference
net: qlge: fix a potential NULL pointer dereference
...
- dmatest updates for modularizing common struct and code
- remove SG support for VDMA xilinx IP and updates to driver
- Update to dw driver to support Intel iDMA controllers
multi-block support
- tegra updates for proper reporting of residue
- Add Snow Ridge ioatdma device id and support for IOATDMA v3.4
- struct_size() usage and useless LIST_HEAD cleanups in subsystem.
- qDMA controller driver for Layerscape SoCs
- stm32-dma PM Runtime support
- And usual updates to imx-sdma, sprd, Documentation, fsl-edma,
bcm2835, qcom_hidma etc
-----BEGIN PGP SIGNATURE-----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=Ykvn
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
- dmatest updates for modularizing common struct and code
- remove SG support for VDMA xilinx IP and updates to driver
- Update to dw driver to support Intel iDMA controllers multi-block
support
- tegra updates for proper reporting of residue
- Add Snow Ridge ioatdma device id and support for IOATDMA v3.4
- struct_size() usage and useless LIST_HEAD cleanups in subsystem.
- qDMA controller driver for Layerscape SoCs
- stm32-dma PM Runtime support
- And usual updates to imx-sdma, sprd, Documentation, fsl-edma,
bcm2835, qcom_hidma etc
* tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (81 commits)
dmaengine: imx-sdma: fix consistent dma test failures
dmaengine: imx-sdma: add a test for imx8mq multi sdma devices
dmaengine: imx-sdma: add clock ratio 1:1 check
dmaengine: dmatest: move test data alloc & free into functions
dmaengine: dmatest: add short-hand `buf_size` var in dmatest_func()
dmaengine: dmatest: wrap src & dst data into a struct
dmaengine: ioatdma: support latency tolerance report (LTR) for v3.4
dmaengine: ioatdma: add descriptor pre-fetch support for v3.4
dmaengine: ioatdma: disable DCA enabling on IOATDMA v3.4
dmaengine: ioatdma: Add Snow Ridge ioatdma device id
dmaengine: sprd: Change channel id to slave id for DMA cell specifier
dt-bindings: dmaengine: sprd: Change channel id to slave id for DMA cell specifier
dmaengine: mv_xor: Use correct device for DMA API
Documentation :dmaengine: clarify DMA desc. pointer after submission
Documentation: dmaengine: fix dmatest.rst warning
dmaengine: k3dma: Add support for dma-channel-mask
dmaengine: k3dma: Delete axi_config
dmaengine: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware
Documentation: bindings: dma: Add binding for dma-channel-mask
Documentation: bindings: k3dma: Extend the k3dma driver binding to support hisi-asp
...
This contains the last patches in Loic's remoteproc resource table
handling changes, a number of updates to documentation, support for
invoking the crash handler (for testing purposes), a fix for the
handling of virtio devices during recovery, performance state votes in
Qualcomm modem driver, support for specifying board specific firmware
path for Qualcomm modem driver and improved support for graceful
shutdown of Qualcomm remoteprocs.
-----BEGIN PGP SIGNATURE-----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=4xC9
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.1' of git://github.com/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This contains the last patches in Loic's remoteproc resource table
handling changes, a number of updates to documentation, support for
invoking the crash handler (for testing purposes), a fix for the
handling of virtio devices during recovery, performance state votes in
Qualcomm modem driver, support for specifying board specific firmware
path for Qualcomm modem driver and improved support for graceful
shutdown of Qualcomm remoteprocs"
* tag 'rproc-v5.1' of git://github.com/andersson/remoteproc: (33 commits)
remoteproc: fix for "dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag"
remoteproc: fix rproc_check_carveout_da() returned error and comments
remoteproc: fix trace buffer va initialization
remoteproc: fix rproc_alloc_carveout() for rproc with iommu domain
remoteproc: add warning on resource table cast
remoteproc: fix rproc_alloc_carveout() bad variable cast
remoteproc: fix rproc_da_to_va in case of unallocated carveout
remoteproc: correct rproc_mem_entry_init() comments
remoteproc: fix recovery procedure
rpmsg: virtio: change header file sort style
rpmsg: virtio: allocate buffer from parent
remoteproc: st: add reserved memory support
remoteproc: create vdev subdevice with specific dma memory pool
remoteproc: q6v5_adsp: Remove voting for lpass_aon clock
dt-binding: remoteproc: Remove lpass_aon clock from adsp pil clock list
remoteproc: q6v5-mss: Active powerdomain for SDM845
remoteproc: q6v5-mss: Vote for rpmh power domains
remoteproc: qcom: Add support for parsing fw dt bindings
remoteproc: qcom_q6v5: don't auto boot remote processor
remoteproc: qcom: Wait for shutdown-ack/ind on sysmon shutdown
...
updates this time around. It's the usual pile of new drivers for new
hardware out there and the normal small fixes and updates, but then we
have some core framework changes too.
In the core framework, we introduce support for a clk_get_optional() API
to get clks that may not always be populated and a way to devm manage clkdev
lookups registered by provider drivers. We also do some refactoring to simplify
the interface between clkdev and the common clk framework so we can reuse the DT
parsing and clk_get() path in provider drivers in the future. This work will
continue in the next few cycles while we convert how providers specify clk
parents.
On the driver side, the biggest part of the dirstat is the Amlogic clk driver
that got support for the G12A SoC. It dominates with almost half the overall
diff, while the second largest part of the diff is in the i.MX clk driver
that gained support for imx8mm SoCs. After that, we have the Actions Semiconductor
and Qualcomm drivers rounding out the big part of the dirstat because they both
got new hardware support for SoCs. The rest is just various updates and non-critical
fixes for existing drivers.
Core:
- Convert a few clk bindings to JSON schema format
- Add a {devm_}clk_get_optional() API
- Add devm_clk_hw_register_clkdev() API to manage clkdev lookups
- Start rewriting clk parent registration and supporting device links
by moving around code that supports clk_get() and DT parsing of the
'clocks' property
New Drivers:
- Add Qualcomm MSM8998 RPM managed clks
- IPA clk support on Qualcomm RPMh clk controllers
- Actions Semi S500 SoC clk support
- Support for fixed rate clks populated from an MMIO register
- Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H
- Add TMU (timer) clocks on Renesas RZ/G2E
- Add Amlogic G12A Always-On Clock Controller
- Add 32k clock generation for Amlogic AXG
- Add support for the Mali GPU clocks on Amlogic Meson8
- Add Amlogic G12A EE clock controller driver
- Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E
- Add i.MX8MM SoC clk driver support
Removed Drivers:
- Remove clps711x driver as the board support is gone
Updates:
- 3rd ECO fix for Mediatek MT2712 SoCs
- Updates for Qualcomm MSM8998 GCC clks
- Random static analysis fixes for clk drivers
- Support for sleeping gpios in the clk-gpio type
- Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
- Split LCDC into two clks on the Marvell MMP2 SoC
- Various DT of_node refcount fixes
- Get rid of CLK_IS_BASIC from TI code (yay!)
- TI Autoidle clk support
- Fix Amlogic Meson8 APB clock ID name
- Claim input clocks through DT for Amlogic AXG and GXBB
- Correct the DU (display unit) parent clock on Renesas RZ/G2E
- Exynos5433 IMEM CMU crypto clk support (SlimSS)
- Fix for the PLL-MIPI on the Allwinner A23
- Fix Rockchip rk3328 PLL rate calculation
- Add SET_RATE_PARENT flag on display clk of Rockhip rk3066
- i.MX SCU clk driver clk_set_parent() and cpufreq support
-----BEGIN PGP SIGNATURE-----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=D4Bv
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk subsystem updates from Stephen Boyd:
"We have a fairly balanced mix of clk driver updates and clk framework
updates this time around. It's the usual pile of new drivers for new
hardware out there and the normal small fixes and updates, but then we
have some core framework changes too.
In the core framework, we introduce support for a clk_get_optional()
API to get clks that may not always be populated and a way to devm
manage clkdev lookups registered by provider drivers. We also do some
refactoring to simplify the interface between clkdev and the common
clk framework so we can reuse the DT parsing and clk_get() path in
provider drivers in the future. This work will continue in the next
few cycles while we convert how providers specify clk parents.
On the driver side, the biggest part of the dirstat is the Amlogic clk
driver that got support for the G12A SoC. It dominates with almost
half the overall diff, while the second largest part of the diff is in
the i.MX clk driver that gained support for imx8mm SoCs. After that,
we have the Actions Semiconductor and Qualcomm drivers rounding out
the big part of the dirstat because they both got new hardware support
for SoCs. The rest is just various updates and non-critical fixes for
existing drivers.
Core:
- Convert a few clk bindings to JSON schema format
- Add a {devm_}clk_get_optional() API
- Add devm_clk_hw_register_clkdev() API to manage clkdev lookups
- Start rewriting clk parent registration and supporting device links
by moving around code that supports clk_get() and DT parsing of the
'clocks' property
New Drivers:
- Add Qualcomm MSM8998 RPM managed clks
- IPA clk support on Qualcomm RPMh clk controllers
- Actions Semi S500 SoC clk support
- Support for fixed rate clks populated from an MMIO register
- Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H
- Add TMU (timer) clocks on Renesas RZ/G2E
- Add Amlogic G12A Always-On Clock Controller
- Add 32k clock generation for Amlogic AXG
- Add support for the Mali GPU clocks on Amlogic Meson8
- Add Amlogic G12A EE clock controller driver
- Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E
- Add i.MX8MM SoC clk driver support
Removed Drivers:
- Remove clps711x driver as the board support is gone
Updates:
- 3rd ECO fix for Mediatek MT2712 SoCs
- Updates for Qualcomm MSM8998 GCC clks
- Random static analysis fixes for clk drivers
- Support for sleeping gpios in the clk-gpio type
- Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
- Split LCDC into two clks on the Marvell MMP2 SoC
- Various DT of_node refcount fixes
- Get rid of CLK_IS_BASIC from TI code (yay!)
- TI Autoidle clk support
- Fix Amlogic Meson8 APB clock ID name
- Claim input clocks through DT for Amlogic AXG and GXBB
- Correct the DU (display unit) parent clock on Renesas RZ/G2E
- Exynos5433 IMEM CMU crypto clk support (SlimSS)
- Fix for the PLL-MIPI on the Allwinner A23
- Fix Rockchip rk3328 PLL rate calculation
- Add SET_RATE_PARENT flag on display clk of Rockhip rk3066
- i.MX SCU clk driver clk_set_parent() and cpufreq support"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
dt-bindings: clock: imx8mq: Fix numbering overlaps and gaps
clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT
clk: fixup default index for of_clk_get_by_name()
clk: Move of_clk_*() APIs into clk.c from clkdev.c
clk: Inform the core about consumer devices
clk: Introduce of_clk_get_hw_from_clkspec()
clk: core: clarify the check for runtime PM
clk: Combine __clk_get() and __clk_create_clk()
clk: imx8mq: add GPIO clocks to clock tree
clk: mediatek: correct cpu clock name for MT8173 SoC
clk: imx: Refactor entire sccg pll clk
clk: imx: scu: add cpu frequency scaling support
clk: mediatek: Mark bus and DRAM related clocks as critical
clk: mediatek: Add flags to mtk_gate
clk: mediatek: Add MUX_FLAGS macro
clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks
clk: ingenic: Remove set but not used variable 'enable'
clk: at91: programmable: remove unneeded register read
clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel
clk: mediatek: add MUX_GATE_FLAGS_2
...
Add a new helper "struct bpf_sock *bpf_get_listener_sock(struct bpf_sock *sk)"
which returns a bpf_sock in TCP_LISTEN state. It will trace back to
the listener sk from a request_sock if possible. It returns NULL
for all other cases.
No reference is taken because the helper ensures the sk is
in SOCK_RCU_FREE (where the TCP_LISTEN sock should be in).
Hence, bpf_sk_release() is unnecessary and the verifier does not
allow bpf_sk_release(listen_sk) to be called either.
The following is also allowed because the bpf_prog is run under
rcu_read_lock():
sk = bpf_sk_lookup_tcp();
/* if (!sk) { ... } */
listen_sk = bpf_get_listener_sock(sk);
/* if (!listen_sk) { ... } */
bpf_sk_release(sk);
src_port = listen_sk->src_port; /* Allowed */
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Lorenz Bauer [thanks!] reported that a ptr returned by bpf_tcp_sock(sk)
can still be accessed after bpf_sk_release(sk).
Both bpf_tcp_sock() and bpf_sk_fullsock() have the same issue.
This patch addresses them together.
A simple reproducer looks like this:
sk = bpf_sk_lookup_tcp();
/* if (!sk) ... */
tp = bpf_tcp_sock(sk);
/* if (!tp) ... */
bpf_sk_release(sk);
snd_cwnd = tp->snd_cwnd; /* oops! The verifier does not complain. */
The problem is the verifier did not scrub the register's states of
the tcp_sock ptr (tp) after bpf_sk_release(sk).
[ Note that when calling bpf_tcp_sock(sk), the sk is not always
refcount-acquired. e.g. bpf_tcp_sock(skb->sk). The verifier works
fine for this case. ]
Currently, the verifier does not track if a helper's return ptr (in REG_0)
is "carry"-ing one of its argument's refcount status. To carry this info,
the reg1->id needs to be stored in reg0.
One approach was tried, like "reg0->id = reg1->id", when calling
"bpf_tcp_sock()". The main idea was to avoid adding another "ref_obj_id"
for the same reg. However, overlapping the NULL marking and ref
tracking purpose in one "id" does not work well:
ref_sk = bpf_sk_lookup_tcp();
fullsock = bpf_sk_fullsock(ref_sk);
tp = bpf_tcp_sock(ref_sk);
if (!fullsock) {
bpf_sk_release(ref_sk);
return 0;
}
/* fullsock_reg->id is marked for NOT-NULL.
* Same for tp_reg->id because they have the same id.
*/
/* oops. verifier did not complain about the missing !tp check */
snd_cwnd = tp->snd_cwnd;
Hence, a new "ref_obj_id" is needed in "struct bpf_reg_state".
With a new ref_obj_id, when bpf_sk_release(sk) is called, the verifier can
scrub all reg states which has a ref_obj_id match. It is done with the
changes in release_reg_references() in this patch.
While fixing it, sk_to_full_sk() is removed from bpf_tcp_sock() and
bpf_sk_fullsock() to avoid these helpers from returning
another ptr. It will make bpf_sk_release(tp) possible:
sk = bpf_sk_lookup_tcp();
/* if (!sk) ... */
tp = bpf_tcp_sock(sk);
/* if (!tp) ... */
bpf_sk_release(tp);
A separate helper "bpf_get_listener_sock()" will be added in a later
patch to do sk_to_full_sk().
Misc change notes:
- To allow bpf_sk_release(tp), the arg of bpf_sk_release() is changed
from ARG_PTR_TO_SOCKET to ARG_PTR_TO_SOCK_COMMON. ARG_PTR_TO_SOCKET
is removed from bpf.h since no helper is using it.
- arg_type_is_refcounted() is renamed to arg_type_may_be_refcounted()
because ARG_PTR_TO_SOCK_COMMON is the only one and skb->sk is not
refcounted. All bpf_sk_release(), bpf_sk_fullsock() and bpf_tcp_sock()
take ARG_PTR_TO_SOCK_COMMON.
- check_refcount_ok() ensures is_acquire_function() cannot take
arg_type_may_be_refcounted() as its argument.
- The check_func_arg() can only allow one refcount-ed arg. It is
guaranteed by check_refcount_ok() which ensures at most one arg can be
refcounted. Hence, it is a verifier internal error if >1 refcount arg
found in check_func_arg().
- In release_reference(), release_reference_state() is called
first to ensure a match on "reg->ref_obj_id" can be found before
scrubbing the reg states with release_reg_references().
- reg_is_refcounted() is no longer needed.
1. In mark_ptr_or_null_regs(), its usage is replaced by
"ref_obj_id && ref_obj_id == id" because,
when is_null == true, release_reference_state() should only be
called on the ref_obj_id obtained by a acquire helper (i.e.
is_acquire_function() == true). Otherwise, the following
would happen:
sk = bpf_sk_lookup_tcp();
/* if (!sk) { ... } */
fullsock = bpf_sk_fullsock(sk);
if (!fullsock) {
/*
* release_reference_state(fullsock_reg->ref_obj_id)
* where fullsock_reg->ref_obj_id == sk_reg->ref_obj_id.
*
* Hence, the following bpf_sk_release(sk) will fail
* because the ref state has already been released in the
* earlier release_reference_state(fullsock_reg->ref_obj_id).
*/
bpf_sk_release(sk);
}
2. In release_reg_references(), the current reg_is_refcounted() call
is unnecessary because the id check is enough.
- The type_is_refcounted() and type_is_refcounted_or_null()
are no longer needed also because reg_is_refcounted() is removed.
Fixes: 655a51e536 ("bpf: Add struct bpf_tcp_sock and BPF_FUNC_tcp_sock")
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The changes for this cycle are across the board. The bulk of it is
cleanups, but there's also new device support in some drivers as well as
more conversions to the atomic API.
-----BEGIN PGP SIGNATURE-----
iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlyJFvUZHHRoaWVycnku
cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zobfREACTyAxr02GyEQFm4wLLV/OG
ynJ45IY2g/9OEY6RGmHQXzcBKycmFtifV6uF5PhMr0KZzdfp/uIMnyHsxV7Gm+ia
NNhG7gQPrb3yZev2AGmc6N/je2+5SL6AZH3+C5ocRqThNKKFknr3uZHbZpmTQlQf
QV63UYNpwtUrFu7jvzNz1kCBBUispXoDY44W0YSv8RYiKOxwJabPott0oOJH8miF
lVyCa2yyA8KuW1DTP13XSHMpmUwKGNkiqaFWGIMPFz6ViK5zj/rY92dUIwLegmh7
l/A7CBMCilw9yd9o1bhSWp2yUJ1gf8QeC64awa0euk9abgX574Nxt+vJsF8EtpaF
8aCcQrJpjlpPCQV4rP62G8Dcr7tWRNmKWKRNMaXQICpdhcLXuwg6tz4HH8z+I1um
W+w+9wsiqrRqKyqxlmQEXBi3qSPepJkU/DUsrE7QoO2jbmi21xyVIi1AQHXqNZYo
y2NzAADuh4i7L8AVFtJ1KcvdZZIBF/XrQXgXEgjX6fQpcs6aMyNOHTu9Xod7XW59
8yBKKqYmvSmmxDcFFfajkBuUbIuUqIzFxr4U6JYHQsWNnVN1ey+MSlZK6bHA8gw0
UngjRNv8fEAU0Hck2Z0iwDe1zHVW6g/ZNKZC2TUqzETPvZHg9QKt0sJYGkmxoR5O
JW1eTekpW57XahV2oX7f3g==
=TyJJ
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"The changes for this cycle are across the board.
The bulk of it is cleanups, but there's also new device support in
some drivers as well as more conversions to the atomic API"
* tag 'pwm/for-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (24 commits)
pwm: atmel: Remove useless symbolic definitions
pwm: bcm-kona: Update macros to remove braces around numbers
pwm: imx27: Only enable the clocks once in .get_state()
pwm: rcar: Improve calculation of divider
pwm: rcar: Remove legacy APIs
pwm: rcar: Use "atomic" API on rcar_pwm_resume()
pwm: rcar: Add support "atomic" API
pwm: atmel: Add support for SAM9X60's PWM controller
pwm: atmel: Add PWM binding for SAM9X60
pwm: atmel: Rename objects of type atmel_pwm_data
pwm: atmel: Add support for controllers with 32 bit counters
pwm: atmel: Add struct atmel_pwm_data
pwm: Add MediaTek MT8183 display PWM driver support
pwm: hibvt: Add hi3559v100 support
dt-bindings: pwm: hibvt: Add hi3559v100 support
pwm: hibvt: Use individual struct per of-data
pwm: imx: Signedness bug in imx_pwm_get_state()
pwm: imx: Split into two drivers
pwm: imx: Don't print an error on -EPROBE_DEFER
pwm: imx: Set driver data earlier simplifying the end of ->probe()
...
* Fix nfit-bus command submission regression
* Support retrieval of short-ARS results if the ARS state is "requires
continuation", and even if the "no_init_ars" module parameter is
specified.
* Allow busy-polling of the kernel ARS state by allowing root to reset
the exponential back-off timer.
* Filter potentially stale ARS results by tracking query-ARS relative to
the previous start-ARS.
* Enhance dax_device alignment checks
* Add support for the Hyper-V family of device-specific-methods (DSMs)
* Add several fixes and workarounds for Hyper-V compatibility.
* Fix support to cache the dirty-shutdown-count at init.
-----BEGIN PGP SIGNATURE-----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=wt4z
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The bulk of this has been in -next since before the merge window
opened, with no known collisions / issues reported.
The only detail worth noting, outside the summary below, is that the
"libnvdimm-start-pad" topic has been truncated to just cleanups and
small fixes. The full topic branch would have doubled down on hacks
around the "section alignment" limitation of the core-mm, instead
effort is now being spent to address that root issue in the memory
hotplug implementation for v5.2.
- Fix nfit-bus command submission regression
- Support retrieval of short-ARS results if the ARS state is
"requires continuation", and even if the "no_init_ars" module
parameter is specified
- Allow busy-polling of the kernel ARS state by allowing root to
reset the exponential back-off timer
- Filter potentially stale ARS results by tracking query-ARS relative
to the previous start-ARS
- Enhance dax_device alignment checks
- Add support for the Hyper-V family of device-specific-methods
(DSMs)
- Add several fixes and workarounds for Hyper-V compatibility
- Fix support to cache the dirty-shutdown-count at init"
* tag 'libnvdimm-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (25 commits)
libnvdimm/namespace: Clean up holder_class_store()
libnvdimm/of_pmem: Fix platform_no_drv_owner.cocci warnings
acpi/nfit: Update NFIT flags error message
libnvdimm/btt: Fix LBA masking during 'free list' population
libnvdimm/btt: Remove unnecessary code in btt_freelist_init
libnvdimm/pfn: Remove dax_label_reserve
dax: Check the end of the block-device capacity with dax_direct_access()
nfit/ars: Avoid stale ARS results
nfit/ars: Allow root to busy-poll the ARS state machine
nfit/ars: Introduce scrub_flags
nfit/ars: Remove ars_start_flags
nfit/ars: Attempt short-ARS even in the no_init_ars case
nfit/ars: Attempt a short-ARS whenever the ARS state is idle at boot
acpi/nfit: Require opt-in for read-only label configurations
libnvdimm/pmem: Honor force_raw for legacy pmem regions
libnvdimm/pfn: Account for PAGE_SIZE > info-block-size in nd_pfn_init()
libnvdimm: Fix altmap reservation size calculation
libnvdimm, pfn: Fix over-trim in trim_pfn_device()
acpi/nfit: Fix bus command validation
libnvdimm/dimm: Add a no-BLK quirk based on NVDIMM family
...
- A new interface for UBI to deal better with read disturb
- Reject unsupported ioctl flags in UBIFS (xfstests found it)
-----BEGIN PGP SIGNATURE-----
iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAlyHyMUWHHJpY2hhcmRA
c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wf9+EACFjPJaTJeLPHQofH3+u9O8gPzh
ptQFzkEcRrr7Y7WjXnYGhjw83Nx4o5iM17gfqq7zYfuCMxVbC8zm0WZ9Ujj3p7xV
p3IJ0bu/9sdIgdo+X9P8XJugAlWit1cW4mI8ZIAl2/CmYBzho8Zo55BNngNQ5G+Y
o3JujvP7TAHm9gbqIUMrGpweBHKX0GoooYZBTPdkLyKnFT0yxzOc/jdVILspIxi5
GtDl4738xV7Ts3Fwson1BVqDdwqLvd2j+LBWeRTSYXKyQLIizxRHtk1EZHZtBDZk
hWS/IW6HOzJJ5EQHn1EFAyQEGhfm4Yty+X0/BaPn8wvGE3Oud7bd9zgUCoBrhhTv
ztLPXY1U1LV8aTCmww6IOXwFj+6BGpj5fIu7my14aqGPKVV5M2kkf+prnLimb9QN
C3WxUz1Spz6CwrexoncvGm9ujoQbmwYLtKVNjRFIJ267OelaVD8icuAp1pZLSDom
1B6l39UQctrMiNqxuzJL+eq2raVZnnSQTlDqbUjFnUuU3LccRRNYgzhT1O6Ph50U
xqSO2k7Pf41/zZXhdB009HLecVL4gsZOunhGOE7Vv4kr7hin0AfrnoegdL37YG8W
GF6BNBgeegOxYDyvbOIWOxDqwyBWY2TPLJJ1IUE6j0lU6P1293IlsYHyTXUIK6bM
CQinKMNAXICWvXG0YQ==
=DlM9
-----END PGP SIGNATURE-----
Merge tag 'upstream-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
- A new interface for UBI to deal better with read disturb
- Reject unsupported ioctl flags in UBIFS (xfstests found it)
* tag 'upstream-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: wl: Silence uninitialized variable warning
ubifs: Reject unsupported ioctl flags explicitly
ubi: Expose the bitrot interface
ubi: Introduce in_pq()
- rbd will now ignore discards that aren't aligned and big enough to
actually free up some space (myself). This is controlled by the new
alloc_size map option and can be disabled if needed.
- support for rbd deep-flatten feature (myself). Deep-flatten allows
"rbd flatten" to fully disconnect the clone image and its snapshots
from the parent and make the parent snapshot removable.
- a new round of cap handling improvements (Zheng Yan). The kernel
client should now be much more prompt about releasing its caps and
it is possible to put a limit on the number of caps held.
- support for getting ceph.dir.pin extended attribute (Zheng Yan)
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlyH5LUTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi9cCCACb8PiX+PZWuwboAmO66TIQGT8VgEer
/K3zU6UsmnKHldk/gyjK+ESIxX64zP9HrNGTDxlDKZTB52GDiAYbhcBnskMtrtgl
EFLweTRs6XiHI1yV3qmElyPz0eLnWBXLUW6RDoyHxGUPWuGk9Mp4Of+PSkl2aO/9
j4eBQj7FYB6XAuzwFKltFq3uKb+jODDrW7VRDDTMEYGPHZOU6EXXUEUOrAtAreiU
j9wHF2AZ61WdVjzzXF/tBHJIwGGZj8102Af4ra/UMuHmtGZag6n0eY6uzGXluY2o
uGPuhFHMExsqjhCCPHtayWJW7WG0pQKKuwT8Ucw/KPBJ6Ok3Z2tG27/8
=sQNQ
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.1-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The highlights are:
- rbd will now ignore discards that aren't aligned and big enough to
actually free up some space (myself). This is controlled by the new
alloc_size map option and can be disabled if needed.
- support for rbd deep-flatten feature (myself). Deep-flatten allows
"rbd flatten" to fully disconnect the clone image and its snapshots
from the parent and make the parent snapshot removable.
- a new round of cap handling improvements (Zheng Yan). The kernel
client should now be much more prompt about releasing its caps and
it is possible to put a limit on the number of caps held.
- support for getting ceph.dir.pin extended attribute (Zheng Yan)"
* tag 'ceph-for-5.1-rc1' of git://github.com/ceph/ceph-client: (26 commits)
Documentation: modern versions of ceph are not backed by btrfs
rbd: advertise support for RBD_FEATURE_DEEP_FLATTEN
rbd: whole-object write and zeroout should copyup when snapshots exist
rbd: copyup with an empty snapshot context (aka deep-copyup)
rbd: introduce rbd_obj_issue_copyup_ops()
rbd: stop copying num_osd_ops in rbd_obj_issue_copyup()
rbd: factor out __rbd_osd_req_create()
rbd: clear ->xferred on error from rbd_obj_issue_copyup()
rbd: remove experimental designation from kernel layering
ceph: add mount option to limit caps count
ceph: periodically trim stale dentries
ceph: delete stale dentry when last reference is dropped
ceph: remove dentry_lru file from debugfs
ceph: touch existing cap when handling reply
ceph: pass inclusive lend parameter to filemap_write_and_wait_range()
rbd: round off and ignore discards that are too small
rbd: handle DISCARD and WRITE_ZEROES separately
rbd: get rid of obj_req->obj_request_count
libceph: use struct_size() for kmalloc() in crush_decode()
ceph: send cap releases more aggressively
...
Highlights include:
Stable fixes:
- Fixes for NFS I/O request leakages
- Fix error handling paths in the NFS I/O recoalescing code
- Reinitialise NFSv4.1 sequence results before retransmitting a request
- Fix a soft lockup in the delegation recovery code
- Bulk destroy of layouts needs to be safe w.r.t. umount
- Prevent thundering herd issues when the SUNRPC socket is not connected
- Respect RPC call timeouts when retrying transmission
Features:
- Convert rpc auth layer to use xdr_streams
- Config option to disable insecure RPCSEC_GSS crypto types
- Reduce size of RPC receive buffers
- Readdirplus optimization by cache mechanism
- Convert SUNRPC socket send code to use iov_iter()
- SUNRPC micro-optimisations to avoid indirect calls
- Add support for the pNFS LAYOUTERROR operation and use it with the
pNFS/flexfiles driver
- Add trace events to report non-zero NFS status codes
- Various removals of unnecessary dprintks
Bugfixes and cleanups:
- Fix a number of sparse warnings and documentation format warnings
- Fix nfs_parse_devname to not modify it's argument
- Fix potential corruption of page being written through pNFS/blocks
- fix xfstest generic/099 failures on nfsv3
- Avoid NFSv4.1 "false retries" when RPC calls are interrupted
- Abort I/O early if the pNFS/flexfiles layout segment was invalidated
- Avoid unnecessary pNFS/flexfiles layout invalidations
-----BEGIN PGP SIGNATURE-----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=9rH/
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.1-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable fixes:
- Fixes for NFS I/O request leakages
- Fix error handling paths in the NFS I/O recoalescing code
- Reinitialise NFSv4.1 sequence results before retransmitting a
request
- Fix a soft lockup in the delegation recovery code
- Bulk destroy of layouts needs to be safe w.r.t. umount
- Prevent thundering herd issues when the SUNRPC socket is not
connected
- Respect RPC call timeouts when retrying transmission
Features:
- Convert rpc auth layer to use xdr_streams
- Config option to disable insecure RPCSEC_GSS crypto types
- Reduce size of RPC receive buffers
- Readdirplus optimization by cache mechanism
- Convert SUNRPC socket send code to use iov_iter()
- SUNRPC micro-optimisations to avoid indirect calls
- Add support for the pNFS LAYOUTERROR operation and use it with the
pNFS/flexfiles driver
- Add trace events to report non-zero NFS status codes
- Various removals of unnecessary dprintks
Bugfixes and cleanups:
- Fix a number of sparse warnings and documentation format warnings
- Fix nfs_parse_devname to not modify it's argument
- Fix potential corruption of page being written through pNFS/blocks
- fix xfstest generic/099 failures on nfsv3
- Avoid NFSv4.1 "false retries" when RPC calls are interrupted
- Abort I/O early if the pNFS/flexfiles layout segment was
invalidated
- Avoid unnecessary pNFS/flexfiles layout invalidations"
* tag 'nfs-for-5.1-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (90 commits)
SUNRPC: Take the transport send lock before binding+connecting
SUNRPC: Micro-optimise when the task is known not to be sleeping
SUNRPC: Check whether the task was transmitted before rebind/reconnect
SUNRPC: Remove redundant calls to RPC_IS_QUEUED()
SUNRPC: Clean up
SUNRPC: Respect RPC call timeouts when retrying transmission
SUNRPC: Fix up RPC back channel transmission
SUNRPC: Prevent thundering herd when the socket is not connected
SUNRPC: Allow dynamic allocation of back channel slots
NFSv4.1: Bump the default callback session slot count to 16
SUNRPC: Convert remaining GFP_NOIO, and GFP_NOWAIT sites in sunrpc
NFS/flexfiles: Clean up mirror DS initialisation
NFS/flexfiles: Remove dead code in ff_layout_mirror_valid()
NFS/flexfile: Simplify nfs4_ff_layout_select_ds_stateid()
NFS/flexfile: Simplify nfs4_ff_layout_ds_version()
NFS/flexfiles: Simplify ff_layout_get_ds_cred()
NFS/flexfiles: Simplify nfs4_ff_find_or_create_ds_client()
NFS/flexfiles: Simplify nfs4_ff_layout_select_ds_fh()
NFS/flexfiles: Speed up read failover when DSes are down
NFS/flexfiles: Don't invalidate DS deviceids for being unresponsive
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXIdqOwAKCRDh3BK/laaZ
PFRlAP0RZr7vDfGcZTXGApcIr63YDjzi8Gg1/Jhd0jrzLbKcdAD+P0d6bupWWwOl
yGjVxY9LkXNJiTI2Q+Equ7AgMYvDcQk=
=Lvcr
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
"Scalability and performance improvements, as well as minor bug fixes
and cleanups"
* tag 'fuse-update-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (25 commits)
fuse: cache readdir calls if filesystem opts out of opendir
fuse: support clients that don't implement 'opendir'
fuse: lift bad inode checks into callers
fuse: multiplex cached/direct_io file operations
fuse add copy_file_range to direct io fops
fuse: use iov_iter based generic splice helpers
fuse: Switch to using async direct IO for FOPEN_DIRECT_IO
fuse: use atomic64_t for khctr
fuse: clean up aborted
fuse: Protect ff->reserved_req via corresponding fi->lock
fuse: Protect fi->nlookup with fi->lock
fuse: Introduce fi->lock to protect write related fields
fuse: Convert fc->attr_version into atomic64_t
fuse: Add fuse_inode argument to fuse_prepare_release()
fuse: Verify userspace asks to requeue interrupt that we really sent
fuse: Do some refactoring in fuse_dev_do_write()
fuse: Wake up req->waitq of only if not background
fuse: Optimize request_end() by not taking fiq->waitq.lock
fuse: Kill fasync only if interrupt is queued in queue_interrupt()
fuse: Remove stale comment in end_requests()
...
Pull vfs mount infrastructure updates from Al Viro:
"The rest of core infrastructure; no new syscalls in that pile, but the
old parts are switched to new infrastructure. At that point
conversions of individual filesystems can happen independently; some
are done here (afs, cgroup, procfs, etc.), there's also a large series
outside of that pile dealing with NFS (quite a bit of option-parsing
stuff is getting used there - it's one of the most convoluted
filesystems in terms of mount-related logics), but NFS bits are the
next cycle fodder.
It got seriously simplified since the last cycle; documentation is
probably the weakest bit at the moment - I considered dropping the
commit introducing Documentation/filesystems/mount_api.txt (cutting
the size increase by quarter ;-), but decided that it would be better
to fix it up after -rc1 instead.
That pile allows to do followup work in independent branches, which
should make life much easier for the next cycle. fs/super.c size
increase is unpleasant; there's a followup series that allows to
shrink it considerably, but I decided to leave that until the next
cycle"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (41 commits)
afs: Use fs_context to pass parameters over automount
afs: Add fs_context support
vfs: Add some logging to the core users of the fs_context log
vfs: Implement logging through fs_context
vfs: Provide documentation for new mount API
vfs: Remove kern_mount_data()
hugetlbfs: Convert to fs_context
cpuset: Use fs_context
kernfs, sysfs, cgroup, intel_rdt: Support fs_context
cgroup: store a reference to cgroup_ns into cgroup_fs_context
cgroup1_get_tree(): separate "get cgroup_root to use" into a separate helper
cgroup_do_mount(): massage calling conventions
cgroup: stash cgroup_root reference into cgroup_fs_context
cgroup2: switch to option-by-option parsing
cgroup1: switch to option-by-option parsing
cgroup: take options parsing into ->parse_monolithic()
cgroup: fold cgroup1_mount() into cgroup1_get_tree()
cgroup: start switching to fs_context
ipc: Convert mqueue fs to fs_context
proc: Add fs_context support to procfs
...
Pull iov_iter updates from Al Viro:
"A couple of iov_iter patches - Christoph's crapectomy (the last
remaining user of iov_for_each() went away with lustre, IIRC) and
Eric'c optimization of sanity checks"
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
iov_iter: optimize page_copy_sane()
uio: remove the unused iov_for_each macro
IMX8MQ_CLK_USB_PHY_REF changes from 163 to 153, this way removing the gap.
All the following clock ids are now decreased by 10 to keep the numbering
right. Doing this, the IMX8MQ_CLK_CSI2_CORE is not overlapped with
IMX8MQ_CLK_GPT1 anymore. IMX8MQ_CLK_GPT1_ROOT changes from 193 to 183 and
all the following ids are updated accordingly.
Reported-by: Patrick Wildt <patrick@blueri.se>
Fixes: 1cf3817b ("dt-bindings: Add binding for i.MX8MQ CCM")
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pull misc vfs updates from Al Viro:
"Assorted fixes (really no common topic here)"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: Make __vfs_write() static
vfs: fix preadv64v2 and pwritev64v2 compat syscalls with offset == -1
pipe: stop using ->can_merge
splice: don't merge into linked buffers
fs: move generic stat response attr handling to vfs_getattr_nosec
orangefs: don't reinitialize result_mask in ->getattr
fs/devpts: always delete dcache dentry-s in dput()
Merge misc updates from Andrew Morton:
- a few misc things
- the rest of MM
- remove flex_arrays, replace with new simple radix-tree implementation
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (38 commits)
Drop flex_arrays
sctp: convert to genradix
proc: commit to genradix
generic radix trees
selinux: convert to kvmalloc
md: convert to kvmalloc
openvswitch: convert to kvmalloc
of: fix kmemleak crash caused by imbalance in early memory reservation
mm: memblock: update comments and kernel-doc
memblock: split checks whether a region should be skipped to a helper function
memblock: remove memblock_{set,clear}_region_flags
memblock: drop memblock_alloc_*_nopanic() variants
memblock: memblock_alloc_try_nid: don't panic
treewide: add checks for the return value of memblock_alloc*()
swiotlb: add checks for the return value of memblock_alloc*()
init/main: add checks for the return value of memblock_alloc*()
mm/percpu: add checks for the return value of memblock_alloc*()
sparc: add checks for the return value of memblock_alloc*()
ia64: add checks for the return value of memblock_alloc*()
arch: don't memset(0) memory returned by memblock_alloc()
...
All existing users have been converted to generic radix trees
Link: http://lkml.kernel.org/r/20181217131929.11727-8-kent.overstreet@gmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Pravin B Shelar <pshelar@ovn.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This also makes sctp_stream_alloc_(out|in) saner, in that they no longer
allocate new flex_arrays/genradixes, they just preallocate more
elements.
This code does however have a suspicious lack of locking.
Link: http://lkml.kernel.org/r/20181217131929.11727-7-kent.overstreet@gmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Pravin B Shelar <pshelar@ovn.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Very simple radix tree implementation that supports storing arbitrary
size entries, up to PAGE_SIZE - upcoming patches will convert existing
flex_array users to genradixes. The new genradix code has a much
simpler API and implementation, and doesn't have a hard limit on the
number of elements like flex_array does.
Link: http://lkml.kernel.org/r/20181217131929.11727-5-kent.overstreet@gmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Pravin B Shelar <pshelar@ovn.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paolo Abeni
Soheil Hassas Yeganeh
Johannes Berg
NeilBrown
Julian Wiedmann
David Ahern
Kirill Tkhai
Stephen Suryaputra
Vakul Garg
Guillaume Nault
Hoang Le
Xin Long
Maxime Chevallier
David S. Miller
Björn Töpel
Pedro Tammela
YueHaibing
Linus Torvalds
Pi-Hsun Shih
Quentin Monnet
Rafael J. Wysocki
Martin KaFai Lau
Abel Vesa
Kent Overstreet